This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
n 1. Front & Back Pink Fabric Placement Stitch ..2530n 2. Cut Line & Tackdown .............................................2530n 3. Light Pink Cover Stitch & Lace ..........................2530n 4. Light Blue Linework ................................................ 4740n 5. Dark Pink Cover Stitch & Linework .................2508
n 1. Front & Back Pink Fabric Placement Stitch ..2530n 2. Cut Line & Tackdown .............................................2530n 3. Light Pink Cover Stitch & Lace ..........................2530n 4. Light Blue Linework ................................................ 4740n 5. Dark Pink Cover Stitch & Linework .................2508
51247-01 Top Left Butterfly Wing FSA
51247-02 Top Right Butterfly Wing FSA
185.0 X 132.8 mm
185.0 X 132.8 mm
7.28 X 5.23 in.
7.28 X 5.23 in.
18618 St.
18730 St.
FABRIC REQUIRED
FABRIC REQUIRED
3
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
n 1. Front & Back Teal Fabric Placement Stitch .. 4740n 2. Cut Line & Tackdown ............................................. 4740n 3. Light Aqua Cover Stitch & Lace ........................ 4740n 4. Light Pink Linework ................................................2530n 5. Dark Aqua Cover Stitch & Linework ...............4620
n 1. Front & Back Teal Fabric Placement Stitch .. 4740n 2. Cut Line & Tackdown ............................................. 4740n 3. Light Aqua Cover Stitch & Lace ........................ 4740n 4. Light Pink Linework ................................................2530n 5. Dark Aqua Cover Stitch & Linework ...............4620
51247-03 Bottom Left Butterfly Wing FSA
51247-04 Bottom Right Butterfly Wing FSA
149.5 X 100.9 mm
149.5 X 100.9 mm
5.89 X 3.97 in.
5.89 X 3.97 in.
14064 St.
14181 St.
FABRIC REQUIRED
FABRIC REQUIRED
4
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
n 1. Front & Back Black Fabric Placement Stitch 4620n 2. Cut Line & Tackdown .............................................4620n 3. Aqua Lace ...................................................................4620n 4. Gray Cover Stitch & Detail .................................. 0108
n 1. Light Blue Lace ..........................................................3962n 2. Dark Blue Lace .........................................................3906
51247-05 Butterfly Body FSA
51247-06 Top Left Butterfly Wing FSL
161.3 X 62.6 mm
185.0 X 132.8 mm
6.35 X 2.47 in.
7.28 X 5.23 in.
5316 St.
32775 St.
FABRIC REQUIRED
5
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
n 1. Light Blue Lace ..........................................................3962n 2. Dark Blue Lace .........................................................3906
n 1. Light Purple Lace ................................................... 3030n 2. Dark Purple Lace .....................................................2920
51247-07 Top Right Butterfly Wing FSL
51247-08 Bottom Left Butterfly Wing FSL
185.0 X 132.8 mm
149.5 X 101.1 mm
7.28 X 5.23 in.
5.89 X 3.98 in.
32775 St.
22001 St.
6
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
• 5” x 7” Pink applique fabric- 4 required• 4” x 5” Teal applique fabric- 4 required• 3” x 6.5” Black applique fabric- 2 required• Note: Fabric sizes are estimates and may result in overage.
Notions & Tools
• OESD Perfect Punch Tool• OESD Perfect Embroidery Press Cloth• OESD Expert Embroidery Tape TearAway • Organ Needle Titanium Sharp 75/11 • 20 mm mini brads; mini brads can be found at your local craft store, office supply store, or
online.
8It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
• The project includes freestanding applique designs and freestanding lace designs. All applique designs are stitched the same as shown in the instructions.
• All designs are stitched with matching thread in the top and bobbin. • Hoop one piece of OESD AquaMesh and one piece of OESD
BadgeMaster in the hoop for all designs.
Step 2• Prep the front and back applique fabrics with one layer of OESD StabilStick CutAway.
Step 3• Stitch Machine Step 1, Front and Back Pink Fabric Placement Stitch. • Shown here in red for instructional purposes. Follow color chart.
• Remove the hoop from the machine, but NOT the project from the hoop. Lay the hoop on a flat surface.
• Cut a piece of prepared fabric slightly larger than the placement line. • Place the prepared fabric right side up, covering the placement line
completely. To secure, tape in place with OESD Expert Embroidery Tape TearAway.
Step 5• Turn the hoop over and place the back prepared applique fabric right
side up covering the placement stitch completely.• To secure, carefully tape in place with OESD Expert Embroidery Tape
TearAway. • Avoid pushing too hard on the stabilizer to prevent it from dislodging
from the hoop.
Step 6• Return the hoop to the machine.• Stitch Machine Step 2, Cut Line and Tackdown.• Shown here in black for instructional purposes. • Follow color chart, matching top and bobbin thread.
• Push a brad through the top eyelet of the body from the front side, then lay flat face down.
Step 5• Arrange the Top Left Wing 01 as shown face up to the right side of the body, with the eyelet on the long
end over the brad. • Note: Since the body of the butterfly is face down, the left wings are attached to the right side and the
right wings are attached to the left side. The position of the wings (left or right) refer to their position on the body from the front.
Step 6• Fold the short end of the wing over, sliding the eyelet directly over the brad.• Bend the brad points apart just enough to hold the wing in place.
• Arrange the Bottom Left Wing 03 as shown face up to the right side of the body, with the eyelet on the long end over the brad.
Step 11• Fold the short end of the wing over, sliding the eyelet directly over the brad.• Bend the brad points apart just enough to hold the wing in place.
Step 12• Arrange the Bottom Right Wing 04 as shown face up on the left side of the body, with the eyelet on the
• Fold the short end of the wing over, sliding the eyelet directly over the brad.• Bend the brad points flat to the wings to secure.
Step 14• The butterfly is complete. Enjoy!
Finishing Touches• TIP: Use ribbon, yarn, or as seen here, a paper clip around the brad to hang the butterfly as desired.
18
INSTRUCTIONS
19
ATTENTIONWhen printing this document, any page scaling or page fitting options in your print dialog box must be turned OFF or set to NONE so that your files will print out at their actual size. Images not printed at actual size will not function as intended.
TO SAVE PAPEROnly print the desired image by navigating to the image’s page,
go to File > Print and select “Current page” in the print dialog box. Repeat for each desired image.
APPLIQUE PATTERNS
20
Print at 100%. No scaling. This box measures 1” x 1”.
Use the box as an accuracy guide when printing
templates.
APPLIQUE PATTERNS
21
Print at 100%. No scaling. This box measures 1” x 1”.
Use the box as an accuracy guide when printing
templates.
MIRRORED PATTERNS
22
Print at 100%. No scaling. This box measures 1” x 1”.
Use the box as an accuracy guide when printing
templates.
MIRRORED PATTERNS
23
Print at 100%. No scaling. This box measures 1” x 1”.