FOX515H Next generation high capacity utility mutliplexer ... · PDF fileFOX515H Next generation high capacity utility mutliplexer Utility Communications ... TDM-connectivity range

FOX515H Next generation high capacity utility mutliplexerUtility Communications

FOX515H complements ABBs FOX-portfolio as a high-end Next Generation Utility Multiplexer. It covers the full TDM-connectivity range from E1 up to multiple STM-64 interfaces. In addition, FOX515H provides strong Ether-net over SDH features.

FOX515H can be configured for full hardware redundan-cy and the network element supports various SDH-traffic protection schemes including 2/4-fibre MS-SPring. EoS features are implemented based on GFP including LCAS and VCAT.

All optical ports are XFP / SFP based and most of them support multirate configuration. Fully integrated and managed boosters and preamplifiers allow implementing highly flexible and reliable long haul connections without additional external devices.

Like all other FOX family members, FOX515H is fully type-tested for Utility applications and integrates seamlessly into ABB’s Network management solutions.

2 Utility communications | FOX515H

FOX515H for smooth network growth

FOX515H is a member of ABB’s comprehensive FOX-family of utility proven communication solutions. FOX515H is positi-oned as high-end Next Generation backbone multiplexer complementing the portfolio of FOX access multiplexers like:

− FOX515: Powerful Utility Access-MUX with trunk-capacity up to STM-4 providing a wide range of user interfaces for legacy, data and voice. Integrated teleprotection and C37.94 functionalities are just a few of its utility specific features.

− FOX505: Smart and space-efficient Utility Access-MUX with trunk-capacity up to STM-1 and the full range of user interfaces required for typical utility applications. FOX505 provides along with traditional services a rich set of LAN-features including TDM-circuit emulation over LAN.

FOX515H is a highly scalable device, which allows growing backbone capacities from STM-1 up to STM-64 for the trans-port of TDM- as well as of Ethernet-traffic.

This very compact FOX-device (9U high only) provides exten-sive protection mechanisms such as HW-protection for MPU and tributaries (two groups 1:N, N=1-5) and the full set of traf-fic protection methods like MSP, SNCP and/or 2 / 4-fiber MS-SPring for SDH-connections.

The robust mechanical and EMC-design including the distri-buted power supply concept of FOX515H are optimized to cope with harsh environments typical for utility applications. The mechanical, electrical and EMC / safety performance of FOX515H is fully type-tested by an independent, certified Swiss Test-lab.

Most interfaces are provided with multirate SFP/XFP cages enabling each individual port to have a different configuration with a wide variety of optical wave-lengths for WDM, connec-tors and available ranges. The integrated space-optimized optical boosters and amplifiers meet the frequent utility requi-rement for long, repeater less spans.

FOX515H offers various types of Main Processing Units (MPUs), comprising the system-controller, the clock & syn-chronization functionality and a non-blocking cross-connect (DXC). For efficient network design and traffic grooming, the DXC even allows to cross-connect at DS0 (64kbps) level. If equipped redundantly, the hot swappable MPU’s work in main/ standby protection mode.

Flexible Network ManagementAs provider of turn-key communication solutions for utility net-works, ABB knows about the importance of flexible Network Management System (NMS) solutions. Lean on-site manage-ment as well as integration of a variety of different communication devices of a utility network into an overall solution is key. With its NMS-suite (FOXMAN / FOXView) and WEB-based management approaches, all NMS requirements can be covered in a modular, customer-friendly way. Manage-ment not only addresses fibre optic equipment but also ABB’s comprehensive range of PLC, Radio and Data-Switch solutions.

Element specific management tasks can be performed either with functionality embedded in the overall NMS or by using the integrated secure WEB-server of FOX515H and a stan-dard WEB-browser. Both methods provide full management capabilities.

In the shelf-view, individual objects (ports, status indicators etc) can be clicked to retrieve additional information or to con-figure features of the concerned item.

NMS example of Network comprising FOX515, FOX515H and ETL600 PLC-equipment

NMS Shelf-view example of FOX515H

FOX515H | Utility communications 3

Technical data

FOX515H MPU types

DXC8G-2* is DXC with HO/ LO cross connect capacity equiva-lent to 8G/ 8G (48xVC-4/ 144xVC-3/ 3024xVC-12), embedded DS0 (64 Kbit/s) cross connect matrix with 384xE1 equivalent capacity, two SFP based STM-1/4 configurable ports. DXC40G* is DXC with HO/ LO cross connect capacity equi-valent to 40G/ 40G (256xVC-4/ 768xVC-3/ 16128xVC-12), embedded DS0 (64 Kbit/s) cross connect matrix with 1008xE1 equivalent capacity. DXC80G* is DXC with HO/ LO cross connect capacity equi-valent to 80G/ 10G (512xVC-4/ 192xVC-3/ 4032xVC-12)

*All MPU cards support hot standby

FOX515H Interface Cards

TM-STM64 is STM-64 XFP interface card with one port (S-64.1, L-64.2, X-64.2) TM-STM64 OP is STM-64 XFP interface card with one port and one integrated optical booster TM-2STM16 is STM-16 SFP interface card with two ports (S-16.1, L-16.1, L-16.2) TM-2STM16 OP is STM-16 SFP interface card with two ports and one integrated optical booster TM-2STM16 2OP is STM-16 SFP interface card with two ports and two integrated optical boosters TM-4STM4 is STM-4 SFP interface card with four ports (S-4.1, L-4.1, L-4.2, X-4.2) TM-8STM1 is STM-1 SFP interface card with eight ports (S-1.1, L-1.1, L-1.2, X-1.2) TM-3E3T3 is interface card with three E3/T3 (34/45 Mbit/s) coaxial ports with BNC connector TM-32E1 is interface card with 32x E1 (2.048 Mbit/s 120 Ohms) ports with EPS support TM-63E1 is interface card with 63x E1 (2.048 Mbit/s 120 Ohms) ports with EPS support TM-GBE155 is interface card with one GBE combo port 10Base-T/ 100Base-Tx/ 1000Base-X, SX, LX and eight elec-trical FE 10Base-T/ 100Base-Tx ports. GFP/ VCAT/ LCAS, QinQ, DSCP, Flow Control, etc. TM-2GBE is interface card with two GBE SFP ports (1000Base-X/ SX/ LX), two electrical GBE and six electrical FE ports (10Base-T/ 100Base-TX). GFP/ VCAT/ LCAS, L1 Transparent Bridge/ L2 Switch, VLAN, QinQ, STP/ RSTP, EAPS, Link Aggregation, IP Precedence, Policing, Traffic sha-ring, Jumbo Frames, etc. TM-8GBE is interface card with eight GBE SFP ports (10Base-T/ 100Base-TX/ 1000Base-X/ SX/ LX). GFP/ VCAT/ LCAS, L1 Transparent Bridge/ L2 Switch, VLAN, QinQ, STP/ RSTP/ MSTP, EAPS, Link Aggregation, IP Precedence, Poli-cing, Traffic sharing, Jumbo Frames, etc.

FOX515H Special Cards

OP-Boost is optical booster sub-module with max. output power +15 dBm (fits into OP-Frame) OP-Preamp is optical preamplifier sub-module with min. receiver sensitivity -32 dBm (fits into OP-Frame) OP-Comp is passive Dispersion compensation sub-module (fits into OP-Frame) OP-Frame is framework occupying one equipment slot. Can be equipped with up to two OP-Boost/ OP-Preamp/ OP-Comp sub-modules MM-HK is miscellaneous interface card with Alarms 8xIn/ 4xOut, V.11 & RS232 service interfaces, EOW interface with selective calls and DTMF signaling

Chassis

9U high with 16+ slots 400x480x272 mm (H x W x D) Distributed, redundant -48/ 60 VDC power concept SynchronizationInput STM-n, E1 (2,048 Mbit/s), 2 MHz Output 2 MHz Mechanical testsIEC60721-3-2 IEC60721-3-3 Emission testsEN61000-6-4 EN55022 Immunity testsEN61000-6-2 and utility specific tests Safety testsEN60950-1 and EN60255-5 Climatic testsIEC60721-3-3 Operation:ETSI EN 300019-1-3 class 3.2 E Temperature -5º to 45°C / 55ºC Humidity 95% r. h. (non condensation) Transport:ETSI EN 300019-1-1 class 2.2 Temperature -25º to +70ºC Storage:ETSI EN 300019-1-1 class 2.2 Temperature -25º to +70ºC

1KH

A -

001

116

- S

EN

- 0

8.10

- P

rinte

d in

Sw

itzer

land

© A

BB

Sw

itzer

land

Ltd

, Aug

ust 2

010.

The

rig

ht to

mod

ifica

tions

or

devi

atio

ns d

ue to

tech

nica

l pro

gres

s is

rese

rved

.

Abbreviations

E1 2Mbit/s signal according to ITU-T G.703 / G.704EMC Electromagnetic CompatibilityEoS Ethernet over SDHEPS Equipment Protection SwitchingGb Gigabit (Gbit/s)GFP Generic Framing Procedure ITU-T G.7041TCP/IP Transmission Control Protocol / Internet ProtocolLAN Local Area Network; Today mostly based on EthernetLCAS Link Capacity Adjustment Scheme accor- ding to ITU-T G.7042MPU Main Processing UnitNMS Network Management SystemOSPF Open Shortest Path First: Dynamic Rou- ting ProtocolPDH Plesiochronous Digital Hierarchy: multi- plexing hierarchy based on 64kbit/sPLC Power Line CarrierSDH Synchronous Digital Hierarchy: Multiple- xing hierarchy based on 155Mbit/sSFP/XFP Small-factor pluggable unit: Pluggable unit containing complete electrical/optical signal interfacesSTM-n Synchronous Transport Module, level n: STM-1, STM-4, STM-16, STM-64TDM Time Division Multiplexing (e.g. PDH or SDH technology) VCAT Virtual Concatenation (of SDH transport containers)WDM Wavelength Division Multiplexing

Communication solutions for utilitiesThe FOX-Family of equipment forms an important part of ABB's comprehensive range of solutions for Utility Communi-cations. As a turnkey provider, ABB has answers to all kind of communication requirements. The following list summarizes the portfolio, which complements the FOX-family in a perfect way.

Optical communication for long distancesAs spans in utility networks tend to be much longer than in public telecom networks, ABB provides specific solutions for long-haul solutions to extend FOX-links repeaterless to more than 300 km.

Power Line CarrierABB's combined analogue / digital Power Line Carrier solu-tions are based on the ETL500 / 600 product family. ETL600 reaches so far unseen transmission rates and self-adapting speed- & multiplexing features to obtain optimized transmis-sion capacities.

Teleprotection systemsABB's NSD-family has a long tradition of stand-alone telepro-tection devices. The latest generation of NSD570 provides highly reliable protection signaling over a wide choice of me-dias (dedicated fiber, analogue / digital interfaces).

Voice systems solutionsTo cover the requirements for traditional analogue or up-com-ing IP-based telephony-services, ABB works closely with selected partners and adds utility specific voice-communica-tion features to the overall solution.

Wireless solutionsWhere no fibers can be installed due to missing rights of way or topographic reasons, ABB can provide microwave, VHF/ UHF radio, cellular and satellite solutions, tailored to the local situation and available frequencies.

In-Plant communicationsIn-Plant communications refer to the applications and tech-nologies used internally in a substation or a power plant. It includes video, public addressing systems, local radio, access control, intruders detection and similar services. The FOX platform enables not only the integration between them but also the connection to the out-plant systems and allows the remote access, a key functionality in the modern utility.

Contact us Contact us

AmericasABB LtdaAv. Monteiro Lobato, 341107190-904 - Guarulhos - SPBrazilPhone: +55 11 2464 8188or: +0800 014 9111 (Call Center) Fax: +55 11 2464 8361

ABB Inc.Utility Communications3450 Harvester RoadBurlington, Ontario L7N3W5CanadaPhone: +1 800 263 9110 (Toll free)or: +1 905 639 8840Fax: +1 905 333 7565

ABB SAPower SystemsJosé I - Rucci 1051 B1822CJU - Valent in AlsinaBuenos Aires, ArgentinaPhone: +54 11 4229 5500 (Switchboard)Fax: +54 11 4229 5819 (Power System)

EuropeABB SpAPower Systems DivisionVia L. Lama 3320099 Sesto San Giovanni (MI), ItaliaPhone : +39 02 2414.3869or: +39 02 2414.3855Fax: +39 02 2414.3916E-Mail: [email protected]

ABB Russia LTD Power Systems DivisionUtility Communication Systems Department2nd Kabelnaya St., 2, 111024 Moscow, Russian Federation Phone: +7 495 956 62 77 Fax: +7 495 956 62 76 E-Mail: [email protected]

ABB Switzerland LtdPower SystemsBrown Boveri Strasse 65400 Baden, SwitzerlandPhone: +41 58 589 37 35or: +41 54 484 58 45 (Call Center) Fax: +41 58 585 16 82 E-Mail: [email protected] ABB LimitedOulton Road, StoneStaffordshireST15 0RSUnited KingdomPhone: +44 1785 825050Fax: +44 1785 819019 E-Mail: [email protected]

IMEAABB Automation Co.Ltd.P.O.Box 441,Riyadh 11383Saudi ArabiaPhone: +966 1 265 3030or: +966 1 265 2112 E-Mail: [email protected]

ABB LLC Oman218 Hatat HouseP.O. Bos 778, Postal Code 131.Al-Hamriya, Sultanate of OmanPhone: +968 24 567 410or: +968 24 567 961 Fax: +968 24 567 406 E-Mail: [email protected]

ABB Industries LLCUtility Communications Systems9th Floor, Concord Tower, Media CityP.O Box 11070Dubai, U.A.EPhone: +971 4 4241900Fax: +971 4 438046

ABB South Africa (Pty) LtdPower System, Utility CommunicationsNo 2 Lake Road, Longmeadow Business Estate (North)Modderfontein, Gauteng, South Africa, 1610Phone: +27 10 202 6995or: +27 10 202 5000 (Switchboard) E-Mail: [email protected]

ABB India Limited22-A, Shah Industrial estate,Off Veera Desai Road,Andheri (West),Mumbai – 400 053, IndiaPhone: +91 22 6671 7272Fax: +91 22 2673 0842

AsiaABB Engineering (Shanghai) Ltd.Power SystemsNo. 5, Lane 369, Chuangye Road, Kangqiao Town, Pudong District, Shanghai, 201319, P.R. ChinaPhone: +86 21 61056666Fax: +86 21 61056677

www.abb.com/utilitycommunications