You Can’t Buy A Better Reel. Family owned and operated since 1933 Firefighting Reels | Preconnect or Storage | No Draining, Stacking, or Dragging | All Sizes and Capacities | | Efficient Use of Vehicle Space | Increased Hose Capacity | Faster Clean-up | ARFF | Distributed by REEL TECH
24
Embed
Form H-0502-F: Firefighting Catalogreeltec.com.au/wp-content/uploads/2015/12/Hannay-Fire-Reels.pdf · why Hannay Reels is the #1 reel company specified by ... drive powered by electric,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
You Can’t Buy A Better Reel.
You Can’t Buy A Better Reel.
Family owned and operated since 1933
Firefighting Reels| Preconnect or Storage | No Draining, Stacking, or Dragging | All Sizes and Capacities |
| Efficient Use of Vehicle Space | Increased Hose Capacity | Faster Clean-up | ARFF |
Distributed by REEL TECH
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
Types of reels:Booster Hose Reels – Quick first-attack for small fires or while larger volume hoses are being set up.
LD (Large Diameter) Reels – Reels for long lengths of 1-½" to 6" collapsible hose.
Dual Agent Reels – For firefighting with foam.
NEW Swing-Out Reels – For aircraft rescue firefighting applications.
Top performance. Extreme conditions. Hannay Reels. Safety and quick response time are critical when it comes to fighting fires. Our reels make payout and pickup quicker so you can work more efficiently and effectively when every second counts. That’s why Hannay Reels is the #1 reel company specified by OEMs and professionals worldwide, based on product reliability, ease of use, and long life. When it comes to keeping your crew and your community safe, you can trust Hannay Reels.
Attention Truck Committees and Specifiers of Fire Apparatus Products shown and described in this catalog are suggested models for broad use applications throughout the firefighting industry. All models can be assembled to dimensionally fit your unique applications and space requirements, and all our components are designed for multiple configurations.
For special orders, contact your Hannay dealer or call our Inside Sales Group.
Reel Type I.D. Hose Sizes PageHow to Specify Hannay Reels 3Manual or Power Rewind Reels
Series F4000 3/4" or 1" 4Series F4100 3/4" or 1" 5Series F 3/4" or 1" 6-7Series SF 3/4" or 1" 8-9Twin Fire Reel Conversion Kit 10Series FF - Booster Hose
Collapsible Hose1-1/4" or 1-1/2" 1-1/2" or 1-3/4"
10-11
Series F7100/FF7200 - Dual Hose 3/4" – 1-1/2" 12-13Swing-Out Reel - Single Hose
Manual or Power Rewind Reels - Large DiameterSeries LD Reels and Spools 1-1/2" – 6" 18-19Mercedes and Niedner Capacities 20Hannay Reels Versatility 21Hannay Reels Policies – Our Guarantee, Service Policy,Paint Notice, Return Goods Policy
22
Hannay Reels Spec Worksheet 23
Mounting Hole Sizes
Pressed Frame Reels and Channel Framed Reels
7/16" wide x 7/8" long slot running left to right
Series 4000 Reels 13/32" round holes
Series LD Reels 5/8" round holes
3
B
XA
F
C G
H
YDE
How to Specify Hannay Reels
Optional Location of ComponentsLocation of the inlet, outlet riser, and rewind mechanism can be varied to meet your requirements and must be specified on your order. The drawings below show the component locations. Unless otherwise specified, most reels will be shipped as Right Top Rewind with the inlet, outlet riser, and rewind mechanism on the operator’s right.
RT – Right Top RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s right. Hose unwinds from the top of the reel.
RB – Right Bottom RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s right. Hose unwinds from the bottom of the reel.
LT – Left Top RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s left. Hose unwinds from the top of the reel.
LB – Left Bottom RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s left. Hose unwinds from the bottom of the reel.
Optional Motor LocationsElectric rewind motors can be installed in any of the positions shown in these drawings. The Bottom Rear position is standard. The motor is installed inside the frame on Model ESF reels, which are designed for installation in restricted space.
Optional Auxiliary Rewind PositionsHorizontal ring and pinion gear crank rewind mechanism is the standard configuration.
Optional positions include vertical and 30° above centerline, as shown in these drawings. Both are available at extra cost and must be specified.
Standard – Always look at your reel from this position to determine right-hand or left-hand.
Standard for 1500, 1800, 2000 & 4000 Series reels.
Horizontal (Standard)
Bottom Rear(Standard)
BottomFront
Elevated 2 O’clock(REF Reels)
Elevated 10 O’clock(REF Reels)
Inboard(ESF Reels)
Vertical 30° Angle
Note: Use component location initials as suffix after model number (ie; EF32-23-24 RT)
High Mount
Low Mount
Optional Roller PositionsOptional roller assembly mounting kits, up to 2 of either, can be mounted per reel. Consult factory, and indicate installation location – front or rear of reel.
SPECIFYING LOCATION OF COMPONENTS
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models. (does not apply to FedEx or UPS):
Net lbs/kg Ship lbs/kgElectric 18/8.2 18/8.2
Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8
4. Dimension “F” is the overall length of standard model reels. On crank rewind models, the dimension shown is with the crank in rewind position. Reels require 3-1/2" clearance to remove crank handle.
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose.
E = Electric Rewind (1/3 HP) – 12v and 24v DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. Be sure to check dimensions and weights prior to ordering.
7. Some roller options may prohibit the use of our molded chain guard.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground).
*** X, Y indicate mounting holes.
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
2. Upon request, reels can be supplied with drum lengths other than shown.
3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kgElectric 18/8.2 18/8.2
Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8
4. Dimension “F” is the overall length of standard model reels.
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose.
E = Electric Rewind (1/3 HP) – 12v and 24v DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
*** X, Y indicate mounting holes.
MANUAL OR POWER REWIND REELS
To handle single 3/4" or 1" I.D. hose.• Lightweight, compact reels designed for long lengths
of hose in manual and power rewind.
• Gear-driven crank rewind handle is removable.
• Chain and sprocket drive powered by electric, hydraulicor compressed air motor.
• Standard outlet: 1" male NST threads.(1.375" x 8 threads per inch.)
• Consult factory for other sizes and/or threads.
• Standard inlet, outlet riser, and hub assembly are steel(also available in stainless steel).
• Rollers and roller mounting brackets are accessory items.Specify roller position.
• Pressures to 1000 psi (69 bar).
• Temperatures from -25°F to +250°F (-32°C to+121°C).
• Consult factory for reels to operate at other pressuresand temperatures.
CAUTION: When using Niedner hose, a special riser and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.
For Booster Hose
MANUAL OR POWER REWIND REELS
Shown with optional red finish and optional roller and spool assembly
Hub Assembly OptionsThe hub assembly is the heart of the hose reel. It includes the outlet riser, the reel axle, and the threaded inlet to which the swivel joint is attached. The swivel joint permits the reel to rotate freely while connected to the fluid source.
The outlet riser is engineered to conform to the contour of the drum so the hose lies smoothly against the drum without kinking. Smooth interior surfaces are flow-contoured for unrestricted flow and minimal pressure loss through the reel.
A 2-way flow hub assembly is available on certain models as an option. On this assembly, the reel axle is threaded on both ends so the swivel joint can be attached at either end to match piping. A pipe cap is supplied to seal the opposite end.
Standard Hub Assembly
Axle Outlet Riser
Threaded Inlet
Standard Hub Assembly with Optional Flanged Riser Flanged
RiserSwivel Joint
Pipe Cap
Swivel Joint
Optional 2-Way Hub Assembly
Threaded Inlet
Twin Fire Reel Conversion Kit is also available. Refer to page 10.
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
PARTS DRAWING: SERIES F – ISO 84; SUPER BOOSTER – ISO 122
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* The “F” dimension for these models is shown for 1/3 HP motors. Add 2" to “F” dimension for 1/2 HP motors. The “F” dimension for all other reels is shown for 1/2 HP. Reels handling 200' or more must use 1/2 HP motor. (Use prefix EP when ordering.)
*** X, Y indicate mounting holes.
Series FFor Booster Hose
MANUAL OR POWER REWIND REELS
Notes: 1. Specifications subject to change.
2. A 2-way flow hub is available at no extra cost and must be specified. Assembly is threaded on both ends so swivel joint can be attached at either end of the reel. A pipe cap seals the opposite end. (See Ordering & Accessory Guide.)
3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kgElectric 40/18.1 40/18.1
Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1
5. When ordering power rewind models, prefix model number with:
A = Air Rewind – supplied with control valve and 18” air hose.
E = Electric Rewind (1/3 HP) EP = Electric Rewind (1/2 HP) – 12v and 24v
DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. For polished aluminum reels, prefix complete model number with “SB” (for example: SBEF 32-19-21).
7. When installing FH-3 rollers, add 4-1/2" to the “D” dimension.
8. Be sure to check dimensions and weights prior to ordering.
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
• Standard outlet: 1" male NST threads (1.375" x 8 threadsper inch).
• Consult factory for other sizes and/or threads.
• Standard inlet, outlet riser, and hub assembly are steel(also available in stainless steel).
• Rollers and roller mounting brackets are accessory items.Specify roller position.
• Pressures to 1000 psi (69 bar).
• Temperatures from -25°F to +250°F (-32°C to+121°C).
• Consult factory for other pressures and temperatures.
CAUTION: When using Niedner hose, a special riser and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.
Standard configuration
shown
For Booster Hose
MANUAL OR POWER REWIND REELS
Hub Assembly OptionsThe hub assembly is the heart of the hose reel. It includes the outlet riser, the reel axle, and the threaded inlet to which the swivel joint is attached. The swivel joint permits the reel to rotate freely while connected to the fluid source.
The outlet riser is engineered to conform to the contour of the drum so the hose lies smoothly against the drum without kinking. Smooth interior surfaces are flow-contoured for unrestricted flow and minimal pressure loss through the reel.
A 2-way flow hub assembly is available on certain models as an option. On this assembly, the reel axle is threaded on both ends so the swivel joint can be attached at either end to match piping. A pipe cap is supplied to seal the opposite end.
Standard Hub Assembly
Axle Outlet Riser
Threaded Inlet
Pipe Cap
Swivel Joint
Optional 2-Way Hub Assembly
Threaded Inlet
Standard Hub Assembly with Optional Flanged Riser Flanged
RiserSwivel Joint
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
2. A 2-way flow hub is available at no extra cost and must be specified. Assembly is threaded on both ends so swivel joint can be attached at either end of the reel. A pipe cap seals the opposite end. (See Ordering & Accessory Guide.)
3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models (does not apply to FedEx or UPS):
Net lbs/kg Ship lbs/kgElectric 40/18.1 40/18.1
Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose. E = Electric Rewind (1/3 HP) EP = Electric Rewind (1/2 HP) – 12v and 24v
DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. For polished aluminum reels, prefix complete model number with “SB” (for example: SBESF32-19-21).
7. All frames are rollformed channel, except Super Booster, which is square tubing.
8. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* Reels handling 200' or more of 1" must use 1/2 HP motor.
To handle 1-1/4" or 1-1/2" I.D. booster hose or 1-1/2" or 1-3/4" I.D. collapsible hose.• Standard booster hose reel is steel, painted graphite.
Aluminum or stainless steel construction is also available.
• “Super Booster” (aluminum construction) reel weighs up to30% less than standard booster reel.
• Gear-driven crank rewind is standard. Choose chain and sprocketdrive powered by electric, hydraulic or compressed air motor.
• Pinion brake standard.
• Standard inlet: 1-1/2" 90° ball bearing swivel joint with1-1/2" female NPT threads and 2" Victaulic groove.
• Flanged outlet riser.
• Standard outlet: 1-1/2" male NST threads.(1.990" x 9 threads per inch.)
• Consult factory for other sizes and/or threads.
• Standard inlet, outlet riser, and hub assembly are steel(also available in stainless steel).
• Rollers and roller mounting brackets are accessory items.Specify roller position.
• Pressures to 600 psi (41 bar).
• Temperatures from -25°F to +175°F (-32°C to +79°C).
• Consult factory for other pressures and temperatures.
CAUTION: When using Niedner hose, a special riser and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.
• Large Diameter Booster Hose • Preconnected Collapsible Hose
MANUAL OR POWER REWIND REELS
Shown with optional polished aluminum
construction
For Series F and FF.Twin booster hose reels combine matched F or FF Series reels in a single unit with a center-mounted roller and spool assembly. Hose from both reels can be used on either side of the truck. Rugged unit frame construction maintains alignment and simplifies installation when two reels are combined.
Consult dealer or factory for more information.
Optional
High mount top wind position
TwinFireReel Conversion Kit For BoosterHose
Two F Series reels, a Twin Fire Reel Conversion Kit, and two optional
outrigger roller assemblies.Shown assembled.
Two F Series reels, and a standard Twin Fire Reel
Conversion Kit.Shown assembled.
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
2. Dimensions up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames, except Super Booster, which is square tubing.
3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models.
Net lbs/kg Ship lbs/kgElectric 40/18.1 40/18.1
Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose.EP = Electric Rewind (1/2 HP) – 12v and 24v
DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. For polished aluminum reels, prefix complete model number with “SB” (for example: SBEPFF28-23-24).
7. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
*** X, Y indicate mounting holes.
Series FFMANUAL OR POWER REWIND REELS
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kgElectric 40/18.1 40/18.1
Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1
4. When ordering power rewind models, prefix model number with:
A = Air Rewind – supplied with control valve and 18” air hose.
EP = Electric Rewind (1/2 HP) – 12v and 24v DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
5. For polished aluminum reels, prefix complete model number with “SB” (for example: SBEPF 7128-23-24).
6. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
*** X, Y indicate mounting holes.
DualHose
• Dual Agent Applications
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
For Single or Dual Agent 1" through 1-1/2" I.D. hose.Hose reels used primariliy in ARFF firefighting applications. These reels mount inside truck cabinets and are designed to swing out for ease of operation and accessibility. Equipped with 2 pin locks to lock reel in stored position as well as 90° to cabinet for forward deployment of hose line.
• 12v or 24v DC explosion-proof motor.
• Heavy-duty square tubing frame.
• Auxiliary bevel gear crank rewind with pinion brake.
• Inlet 90° FxF swivel joint.
• Outlet MNST is standard (other threads available).
• Swing-out frame includes bearings and bracketsfor swing mount.
Two reels installed in the hose bed. In this arrangement, the upper reel is unloaded only if necessary. Payout and rewinding of the upper reels are facilitated by the position of the lower reel. Two reels with larger-diameter discs and narrower drums can also be installed side-by-side in the rear of the hose bed to handle approximately the same amount of hose. This method allows a center walkway or paying out two lines simultaneously if required.
Single large-capacity reel installed in the hose bed area to handle long lengths of pre-coupled hose. Hose pays out from the top of the reel so gravity assists unwinding.
Reels and spools to handle up to 6" I.D. collapsible hose.Typical Installations:
• Square tubing frames.
• Heavy-gauge steel discs.
• Drums are formed by reinforced tie rods with radial supports.
• Pillow block ball bearings.
• Chain and sprocket rewind with electric (12v or 24v) or hydraulicrewind motor.
• Hydraulic caliper disc brake.
Hydraulic Requirements• It is important that the end-user provide Hannay Reels with
complete specifications as to the required operation of thelarge diameter reel being specified. Any speed and torquerequirements MUST be known to properly specify the correctreel for the application.
• Hannay Reels does not recommend specific brands for hydraulicsystem components. We suggest you work with your hydrauliccomponent supplier to meet your specs.
Custom Reels• The standard models listed represent the most frequently
specified customer requirements for handling large-diameter firehose. Because of the many possible variations in reel installationand hose capacity requirements, we will also custom build reelsand spools to your specifications to become an integral part ofthe apparatus. Reels are built of steel construction, and variousfinishes are available.
Consult factory for complete specifications on an LD reel to meet your requirements.
Important: Hose capacity is based on the flat hose dimensions listed below, with couplings at 100 foot intervals.
Flat Hose Dimensions
Thick x WidthI.D. in mm
1" 1/2 x 1-3/4 12.7 x 44.4
1-1/2" 3/4 x 3 19.0 x 76.2
1-3/4" 7/8 x 3-1/4 22.2 x 79.4
2" 3/4 x 3-1/2 19.0 x 88.9
2-1/2" 3/4 x 4 19.0 x 101.6
3" 1/2 x 5 12.7 x 127.0
4" 1/2 x 6-1/2 12.7 x 165.1
5" 1/2 x 8 12.7 x 203.2
6" 1/2 x 10 12.7 x 254.0
Custom sizes are available to meet specific needs.
LargeDiameter
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
Complete reel assembly with No. 50 chain and sprocket and hydraulic rewind motor mounted inside the frame. When ordering, use prefix model number with HD (for example: HDLD 350-64 version F).
Version G Reel:
(High profile) complete reel assembly with chain and sprocket drive and electric rewind motor, including clutch and double reduction unit. Motor is mounted inside the frame. Disc diameters (E dimension) up to and including 39" only. When ordering, use prefix model number with EP (for example: EPLD 242-39 version G). “F” dimension = “A” dimension +5".
Notes:1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
3. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* The “F” dimension for these models is shown for 1/3 HP motors. Add 2" to “F” dimension for 1/2 HP motors. The “F” dimension for all other reels is shown for 1/2 HP. Reels handling 200' or more must use 1/2 HP motor. (Use prefix EP when ordering.)
*** X, Y indicate mounting holes.
21
B
XA
F
C G
H
YDE
B
XA
F
C G
H
YDE
FIREFIGHTING REELS
Hannay Reels Versatility
Firefighting and rescue operations around the country depend on the versatility of Hannay Reels.For decades, Hannay Reels has set the standard of quality and reliability for hose reels in the firefighting industry.
But as the needs of the industry change, so do our reels. Hannay prides itself on being able to conform to new standards required by the firefighting industry – reels that fit into side compartments or bumper mounts, open reel installation or swing-out reels for easy, quick access.
Through research and development of internationally recognized standard models, to custom one-of-a-kind applications, Hannay continues to meet the specific needs of the vehicle or individual fire department.
In supplying both apparatus manufacturers and aftermarket fire departments worldwide, Hannay has consistently serviced the needs of the industry. With Hannay reels, there’s no draining, stacking or dragging. Plus, firefighters appreciate quick attack and fast pick-up.
What size reel can we build for you?
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
Our Guarantee and Service Policy - 2 Year WarrantyEquipment manufactured by Hannay Reels, Inc. is guaranteed for 2 years from date of shipment when installed according to our instructions, given proper care, and used for the purpose for which it is designed.
Equipment which proves to be defective upon our inspection will be replaced free of charge, including freight to the customer. Our responsibility ceases upon delivery to any common carrier and we do not, unless previously instructed, insure shipments beyond point of delivery to such carrier. No material will be accepted for return without a return goods authorization. No allowance will be made for labor charges incurred in making exchanges, replacements or repairs.
Components (including hose and cable) which are manufactured by other vendors will be subject to the warranty terms of their own manufacturers.
Also excluded from the general guarantee are normal wear items (including seals, motor brushes, and paint finish).
We reserve the right to modify or alter materials, dimensions, design, and construction when necessary to improve the performance of the reel and/or accessories, or to meet delivery requirements.
Failure to use a properly sized circuit breaker with any electric rewind motor will void warranty on motor.
Failure to use a flexible connector with any live hose reel will void warranty on swivel joint.
We expressly disclaim any liability for damage or injuries resulting from the use, operation, service, maintenance or failure of equipment.
Notice on Reel FinishStandard finish on Hannay reels is a high performance modified acrylic enamel paint. Standard color is metallic graphite. Other colors available at no additional cost include red, white, black, and primer.
Most of the major components on standard reels are e-coated prior to receiving final topcoat paint finish. This combination of e-coat and enamel topcoat will meet the finish requirements of most customer applications and environments.
In cases where requirements cannot be met with the standard finish, Hannay Reels can coat any model reel with an automotive primer, allowing application of final coating at your facility. Alternatively, Hannay Reels can provide a quote for matching a customer-provided paint specification. For further information, please contact your Hannay Reels sales engineer and a special paint request form will be sent to you.
For environments where no paint finish is suitable, we offer both aluminum and stainless steel (304 grade) construction on most reel models.
Return Goods PolicyAll Hannay reels are built to order. The parts and components are ordered or placed into production as soon as the order is written.
In order to keep the number of returned goods at a minimum, we ask that you use the Hannay Reels Spec Worksheet and/or Accessory Order Form when specifying reels with us. Be sure to include any size and/or weight limitations for your installation.
In the event that an item does need to be returned for credit, repair or replacement, prior approval must be obtained from Hannay Reels, Inc. Upon your request, we will fax a Return Goods Authorization form. A signed copy of this form must accompany the material when returned to us.
All material must be returned prepaid, unless otherwise noted on our Return Goods Authorization. No return will be accepted that has been damaged due to improper return packaging, tampered with or altered from its original condition. Equipment specially built to customer specifications and requirements is not subject to cancellation or returnable for credit under any conditions.
Our restocking and handling fee is a MINIMUM of 25% for standard catalog reels and parts.
No material will be accepted for credit when returned without permission. Orders for equipment incorporating variations from catalog listed items are special and are not subject to return.
No allowance will be made for labor or mileage charges incurred in making exchanges, replacements or repairs.
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN
HoseReel SpecWorksheetTo specify Hannay reels, fill out this simple form and mail or fax it to your dealer.
Photocopy this page or download and print from hannay.com
HOW DO I GET THE RIGHT HOSE REEL?
For custom applications not found in our catalogs, call the Inside Sales Group at 518-797-3791.
1. Who is the reel for?
Contact Date / /
Company Division
Street Address
City State Zip Country
Telephone ( ) Fax ( )
or
Drag Position SR
Constant tension available on all roller positions
Lift Position VR
Stretch (no roller) Position TR
Wall Mount Position TR
Recovery (pick-up) (no roller)
5. Please note size and/or weight limitationsfor your installation
SPECIFICATIONS
Length:
Height:
Width:
Weight:
Note: Use component location initials as suffix after model number (ie: EF32-23-24 RT)
4. Specifying Locationof Components
Optional Location of Components:
Location of the inlet, outlet riser, and rewind mechanism can be varied to meet your requirements and must be specified on your order. Unless otherwise specified, most reels will be shipped as Right Top Rewind with the inlet, outlet riser, and rewind mechanism on the operator’s right.
RT – Right Top Rewind Standard – Always look at your reel from this position to determine right hand or left hand.
RB – Right Bottom Rewind
LT – Left Top Rewind Standard for 1500, 1800, 2000 & 4000 Series reels.
LB – Left Bottom Rewind
Indicate your custom specifications
3. What features does the reel need? Check type of rewind:
MANUAL REWIND
Disc rewind (hand over hand) Gear-driven crank Direct crank (permanent or removable) Chain-driven crank
POWER REWIND
Spring Air Electric (voltage): Hydraulic
Type of installation (check one): Floor Wall Overhead Vehicle
hose reels• Live electric cable reels• Power rescue tool reels• Portable electric
cable reels
View all our reel catalogs online at reeltec.com.au
Only one reel is built strong to last long. Our reels are custom designed to meet your unique specs, never retrofitted to the job. So no matter how small the footprint, you can expect superior performance every time. And we only use high quality, heavy-duty materials – never plastic – which is why our reels often outlast the vehicles they’re on. For reels that outlast and outperform all the others, you can depend on Hannay, the leader in OEM, industrial, and commercial reel applications.
You Can’t Buy A Better Reel.
Family owned and operated since 1933
Find reels for every need.Learn more about all of our reels, including specs, drawings, and even
how to select the right reels and accessories for your industry.
Family owned and operated since 1933, Hannay Reels is the world leader in both OEM and aftermarket applications. Hannay offers thousands of standard hose reel and cable reel models, as well as unmatched custom capabilities. We can easily and affordably customize a reel to meet your exact specifications – built to last, delivered fast. Additional catalogs are available through your local Hannay Reels dealer or online at reeltec.com.au
All Hannay reels are constructed of quality heavy gauge steel (optional aluminum or stainless steel also available on most models).
REEL TECH PTY LTDAustralia & New Zealand
AU | reeltec.com.auPhone: +61 3 9583 2368Free call: 1800 REELIN