All informations are subject to change without notice. © 2018 Spring Lighting Group All rights reserved. SLG Lighting 10643 W. Airport Blvd. Suite 400, Stafford , Texas 77477 Email: [email protected] | Phone: (832) 939-8412 | www.slgus.com FLS.V18.06 Project: Catalog No.: Fixture Type: Notes: FLS MINI FLOOD LIGHT SERIES SPECIFICATIONS HOUSING Precision die-cast aluminum housings and mounting knuckle. Parting lines dressed for high quality finish. AMBIENT TEMPERATURE Suitable for use in -40°C to +45°C (-40°F to 113°F) MOUNTING Mounting Knuckle with ½” threaded male fitting and “O-ring” gasket or Trunnion EFFICACY Up to 120 lumen’s per watt (see individual wattage data) CCT AND CRI 3000K, 4000K and 5000K CCT available; 70CRI OPTICS NEMA Wide (7H X 7V) LENS Frosted Acrylic GASKETS High temperature molded one-piece silicone FASTENERS Stainless steel, tamper proof WARRANTY 10 year limited warranty. Complete warranty terms located at. www.slgus.com PERFORMANCE INFORMATION* Mini-Floodlights are capable of replacing 150W Incandescent PAR lamps, all the way up to 100W Metal Halide Floodlights, and provide substantial energy-savings. Applications: landscape, a small sign, building accent lighting, etc. Replacement: 50W MH - 100W MH / 100W-150W Halogen ORDERING GUIDE EXAMPLE: FLS 15 G1 4k Luminaire Type Lumen Output* Generation Voltage CCT Finish Mounting FLS Mini Flood Light 15 1,500 Lumens 30 3,000 Lumens 51 5,400 Lumens G1 Blank 120-277V 3K 3000K 4K 4000K 5K 5000K Blank Dark Bronze Blank 1/2 Knuckle T Trunnion ELECTRICAL Driver efficiency (>90% standard), 50/60Hz available in 120-277V Open/ short circuit protection. 10K Surge protector per ANSI/IEEE C62.41.2 FINISH Polyester Powder finish in Bronze CERTIFICATIONS UL Listed for wet locations. Equivalent to IP65 rating. FCC compliant. RoHs compliant. Design Lights Consortium® (DLC) Standard qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.slgus.com/DLC to confirm which versions are qualified. NOTE: Standard driver operates on any line voltage from 120-277V (50/60 Hz). * Data as report to DLC, actual test results may vary SERIES NUMBER POWER VOLTAGE DELIVERED LUMENS BEAM PATTERN CCT FLS 15 G1 5K 15 Watts 120-277V 1,500 Lumens 7Hx7V (150°x150°) 5000K FLS 30 G1 5K 30 Watts 120-277V 3,000 Lumens 7Hx7V (150°x150°) 5000K FLS 51 G1 5K 45 Watts 120-277V 5,400 Lumens 7Hx7V (150°x150°) 5000K Finish Color Dark Bronze