Top Banner
- 1 - FA System : Simplex 4100ES
16

Fire Alarm (Simplex).pdf

Dec 05, 2015

Download

Documents

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Fire Alarm (Simplex).pdf

- 1 -

FA System : Simplex – 4100ES

Page 2: Fire Alarm (Simplex).pdf

- 2 -

FA System : Addressable

On smooth ceilings, smoke sensor spacing of

9.1 m may be used as a guide.

Seven levels of sensitivity are available for eac

h individual sensor, ranging from 0.2% to 3.7%

per foot of smoke obscuration. Sensitivities of

0.2%, 0.5%, and 1% are for special application

s in clean areas. Standard sensitivities are

1.5%, 2.0%, 2.5%, and 3.7%.

TrueAlarm analog sensors provide an analog

measurement digitally communicated to the ho

st control panel using Simplex addressable

communications.

Monitoring each sensor’s average value provid

es a continuously shifting reference point. This

software filtering process compensates for envi

ronmental factors (dust, dirt, etc.) and compon

ent aging, providing an accurate reference f

or evaluating new activity. With this filteri

ng, there is a significant reduction in the proba

bility of false or nuisance alarms caused by shi

fts in sensitivity, either up or down.

The alarm set point for each TrueAlarm sensor

is determined at the host control panel, selecta

ble as more or less sensitive as the individual

application requires.

Page 3: Fire Alarm (Simplex).pdf

- 3 -

FA System : Addressable

Digital transmission of analog sensor values via IDNet o

r MAPNET II two-wire communications.

Address remains with its programmed location.

Rate-of-rise temperature detection is selectable at the

control panel for either 15°F (8.3°C) or 20° F (11.1° C)

per minute.

Fixed temperature sensing is independent of rate-of-rise

sensing and programmable to operate at 135°F (57.2°C

) or 155° F (68° C).

In a slow developing fire, the temperature may not incre

ase rapidly enough to operate the rate-of-rise feature. H

owever, an alarm will be initiated when the temperature

reaches its rated fixed temperature setting.

Page 4: Fire Alarm (Simplex).pdf

- 4 -

FA System : Non-Addressable

Page 5: Fire Alarm (Simplex).pdf

- 5 -

FA System : Duct Detector

Page 6: Fire Alarm (Simplex).pdf

- 6 -

FA System : A/V Horn & Strobe

Page 7: Fire Alarm (Simplex).pdf

- 7 -

FA System : Manual Call Point, Control& Monitoring Node

Page 8: Fire Alarm (Simplex).pdf

- 8 -

Reflective Beam Smoke Detector

Page 9: Fire Alarm (Simplex).pdf

- 9 -

FA System : Remote LCD Annuciator

Page 10: Fire Alarm (Simplex).pdf

- 10 -

FA System : Bell

Page 11: Fire Alarm (Simplex).pdf

- 11 -

FA System : Fire Intercom

Page 12: Fire Alarm (Simplex).pdf

- 12 -

FA System : EOL & Lamp

Page 13: Fire Alarm (Simplex).pdf

- 13 -

FA System : Control Panel

Page 14: Fire Alarm (Simplex).pdf

- 14 -

FA System : Basic Unit

Page 15: Fire Alarm (Simplex).pdf

- 15 -

FA System : LED & SW Controller

Page 16: Fire Alarm (Simplex).pdf

- 16 -

FA System : Audio Controller