PH-1.18 PROJECT INFORMATION APPROVAL STAMP Project: q Approved Address: q Approved as noted Contractor: q Not approved Engineer: Remarks: Submittal Date: Notes 1: Notes 2: WALL BRACKETS Fig. 551 (Formerly Afcon Fig. 551) Revolver Bracket Size Range: 3 ⁄8" rod Material: Carbon Steel Finish: Pre-Galvanized per ASTM A653 Service: Wall Bracket mounts on the side of wood, steel, and concrete walls and beams to support up to 4" NPS horizontal piping. Approvals: cULus Listed (UL 203) Patents: No. 6,568,642 Installation: • Mount on the side of wood, steel, or concrete walls and beams using the fasteners listed in NFPA 13 and the mounting fastener table listed below. • Fully thread the rod through the threaded mounting hole. Features: • Universal fastener array optimizes the fastener size and placement for various structure types and pipe sizes. • Threaded mounting hole features a lead-in radius for easier installation. • No backing nuts are required on the rod. • Center mounting hole accepts 3 ⁄8" and 1 ⁄2" fasteners Ordering: Specify figure number and description. FIG. 551: DIMENSIONS (IN) • WEIGHT (LBS) Rod Size A B C D E øH1 øH2 Approx. Weight/100 3 ⁄8 2 1 1 ⁄4 1 3 ⁄8 3 ⁄4 1 1 ⁄4 1 ⁄4 1 ⁄2 12 A B D øH2 øH1 (6 Places) C E
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PH-1.18
PROJECT INFORMATION APPROVAL STAMPProject: q Approved
Size Range: 3⁄8" rodMaterial: Carbon SteelFinish: Pre-Galvanized per ASTM A653Service: Wall Bracket mounts on the side of wood, steel, and concrete walls and beams to support up to 4" NPS horizontal piping.Approvals: cULus Listed (UL 203)Patents: No. 6,568,642Installation:
• Mount on the side of wood, steel, or concrete walls and beams using the fasteners listed in NFPA 13 and the mounting fastener table listed below.
• Fully thread the rod through the threaded mounting hole.Features:
• Universal fastener array optimizes the fastener size and placement for various structure types and pipe sizes.
• Threaded mounting hole features a lead-in radius for easier installation.• No backing nuts are required on the rod.• Center mounting hole accepts 3⁄8" and 1⁄2" fasteners