FiberLink RF-over-Fiber series · signal transmission over optical-fiber at the highest quality level. The FiberLink series features 3 different variants - EcoLink, ProLink and RedLink

Secure and stable RF signal distribution over long distances becomes more and more relevant in satellitecommunication, broadcast and broadband architectures. The RF-over-Fiber optical transmission systemFiberLink represents professional, flexible and reliable solutions for transmitting L-Band and/or IF signals viaoptical-fiber. It is especially developed for the satellite communications-, broadband- and broadcast industry andexcellently suited for integrations in Teleports, Up- and downlink stations, broadcasting operations as well ascable- and IPTV facilities. The Fiberlink series offers excellent performance as well as secure and accuratesignal transmission over optical-fiber at the highest quality level.

The FiberLink series features 3 different variants - EcoLink, ProLink and RedLink -.The flexible EcoLink system is a straight forward RF-over-Fiber solution for IF and L-Band optical transmissionwhile LNB-supply and gain adjustment is optionally available. The more advanced and professional systemsProLink & RedLink both offer various additional features like Laser/Link/RF-power monitoring, manual andautomatic gain control (MGC/AGC), LNB-supply, remote access and configuration while the RedLink features1:1redundancy (hot-swappable) for both the TX/RX (laser/link) so to assure secure and stable signal transmissi-on at any time.

FiberLink RF-over-Fiber seriesEcoLink, ProLink & RedLink optical transmission systems

Fib

erL

ink R

F-o

ver-

Fib

er

seri

es

GENERAL

EcoLink Products ProLink Products

Ø

Ø

Ø

Ø

Ø

Ø

Ø

FTC2S/FRC2S

FTRC16S

FTX714EL

FRX714EL

FTX2012EL

FTX2112EL

FRX2012EL

1RU/19" TX/RX -chassis

3RU/19" TX/RX-chassis

Optical TX module, IF

Optical RX module, IF

Optical TX-module, L-Band

Optical TX-module, L-Band

Optical RX module, L-Band

(with Gain adjustment and LNP-supply)

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

FLC102

FLC316

FLTXI-S

FLRXI-S

FLTXL-S

FLRXL-S

FLCR101

FLCR416

FLTXI-R

FLRXI-R

FLTXL-R

FLRXL-R

1RU/19" TX/RX chassis

3RU/19" TX/RX chassis

Optical TX module, IF

Optical RX module, IF

Optical TX-module, L-Band

Optical RX module, L-Band

1RU/19" TX/RX redundant chassis

4RU/19" TX/RX redundant chassis

Optical 1:1 red. TX module, IF

Optical 1:1 red. RX module, IF

Optical 1:1 red. TX-module, L-Band

Optical 1:1 red. RX module, L-Band

RedLink Products (1:1 redundant system)

Made

inGermany

The EcoLink RF-over-Fiber system offers various mechanical options in 1 & 3RU/19" design providing costeffective, space saving and straight forward optical distribution of IF and L-Band signals. The EcoLink chasssiscan be equipped either with 2 optical TX/RX modules (1RU variant) or up to 16 TX/RX modules (3RU variant)while the chassis are equipped with 1:1 redundant power-supply (hot-swappable) and status LED´s.

Eco

Lin

k R

F-o

ver-

Fib

er

TX

/RX

Ch

assisGENERAL

FTC2S/FRC2S 1RU CHASSIS FTRC16S CHASSIS

FEATURES FEATURES

SPECIFICATIONS

EcoLink TX/RX ChassisEcoLink TX/RX chassis FTC2S/FRC2S & FTRC16S

SPECIFICATIONS

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Modular 3RU/19" opticial transmission chassis

Modular IF/L-Band transmission

Up to 16 RF signals over fiber transmission

Insertion of max. 16 EcoLink TX or RX modules

Features 1:1 power-supply redundancy (hot-swapp.)

Front side LED´s indicating power-supply status

(per chassis)

(1:1 redundant, hot-swapp.)

(pot. free)

Mechanical dimension:

Red. Power-supply:

Power consumption:

1:1 psu alarm connector:

Module slots:

Environmental condit.:

RoHS

3RU/19", 295mm deep

85...230V, 50/60Hz

<60W

DB9-female

16

ETS300019, Part 1-3,Class 3.1

: Compliant

(for TX/RX modules)

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Space saving 1RU/19" opticial transmission chassis

Compact IF & L-Band transmission

Up to 2 RF signals over fiber transmission

Insertion of max. 2 EcoLink TX or RX modules

Features 1:1 power-supply redundancy (hot-swapp.)

Front side LED´s indicating power-supply status

(per chassis)

Mechanical dimension:

Power-supply:

Power consumption:

1:1 psu alarm connector:

Module slots:

Environmental condit.:

RoHS:

1RU/19", 260mm deep

85...230V, 50/60Hz

<15W

DB9-female

2 (for TX/RX modules)

ETS300019, Part 1-3,Class 3.1

Compliant

(1:1 redundant, hot-swapp.)

(potent. free)

Made

inGermany

Eco

Lin

k R

F-o

ver-

Fib

er

op

tical m

od

ule

s

TECHNICAL SPECIFICATIONS

EcoLink Optical modulesEcoLink optical modules FTX/FRX714EL, FTX/FRX2xxxEL

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range

RF Input connector:

RF Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Input noise floor:

Spurious free dyn. range:

Optical Output connectors:

Operating wavelength:

Optical power:

RoHS:

: 10...200MHz

50Ohm SMA (f) or75Ohm BNC(f)

0dBm max.

1,0dB

18dB

< -56dBc

> -133dBm/Hz

109dB/Hz

E2000 or SC/APC*

1310nm

2dBm

Compliant

±

( VSWR: 1:1.29)

( C/N: 57dB min. @36MHz)

!

!

*upon request

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

FRX714EL optical receiver IF

FTX714EL optical transmitter IF

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range

RF Input connector:

RF Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Input noise floor:

Spurious free dyn. range:

Optical Output connectors:

Operating wavelength:

Optical power:

*Gain adjust:

*LNB-supply:

RoHS:

: 950...2150MHz

50Ohm SMA (f) or75Ohm F(f)

0dBm max.

1,0dB

16dB

< -60dBc

> -133dBm/Hz

109dB/Hz

E2000 or SC/APC*

1310nm

2dBm

-10...+20dB

13/15/18V, 22kHz,400mA

Compliant

±

( VSWR: 1:1.38)

( C/N: 57dB min. @36MHz)

!

!

*upon request

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

FRX2012EL optical receiver L-Band

FTX2012EL/FTX2112EL* optical transmitters L-Band

FTX/FRX714EL MODULES (IF-range) FTX/FRX2xxxEL MODULES (L-Band range)

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range:

Optical Input connectors:

Operating wavelength:

Optical Input level:

RF Output connectors:

Frequency response:

Return loss:

IMA3 @ -10dBm

Noise floor:

Spurious free dyn. range:

RF output power:

10...200MHz

E 2000 or SC/APC*

1310 - 1560nm

+10dBm

50Ohm SMA(f) or75Ohm BNC(f)

1,0dB

18dB

: < -50dBc

> -133dBm/Hz

109dB/Hz

+10dBm

*upon request

±

( VSWR: 1:1.29)

( C/N: 57dB min. @36MHz)

!

!

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS: Compliant

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range:

Optical Input connectors:

Operating wavelength:

Optical Input level:

RF Output connectors:

Frequency response:

Return loss:

IMA3 @ -10dBm

Noise floor:

Spurious free dyn. range:

RF output power:

950...2150MHz

E 2000 or SC/APC*

1310 - 1550nm

+10dBm

50Ohm SMA(f) or75Ohm F(f)

1,0dB

16dB

: < -56dBc

> -133dBm/Hz

109dB/Hz

+10dBm

*upon request

±

( VSWR: 1:1.38)

( C/N: 57dB min. @36MHz)

!

!

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS: Compliant

Made

inGermany

The ProLink RF-over-Fiber system offers mechanical options in 1 & 3RU/19" design for flexible and high qualityoptical distribution of up to 16 IF or L-Band signals. The ProLink chasssis can be equipped either with 2 optical TX/RXmodules (1RU variant) or up to 16 TX/RX modules (3RU variant). Furthermore the ProLink system offers variousfeatures like front side 5,7" touch screen LC-Display for local control, remote interfaces for remote acces andconfiguration, Laser, Link and RF power monitoring, gain adjustment and LNB-supply.

This professional fiber optic transmission system is perfectly suited for Satellite communications and broadbandinfrastructurs where satellite signals have to be transmitted over long distances while perfect RF performance anderror free signal distribution is assured.

The ProLink chassis aredesigned to allow mixed configurations for insertion of IF and/or L-Band TX/RX modules within the same chassist.

GENERAL

FLC102 1RU CHASSIS FLC316 3RU CHASSIS

FEATURES FEATURES

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

1RU/19" opticial transmission chassis

Compact, professional and secure signal transmission

Up to 2 RF signals over fiber transmission

Insertion of max. 2 ProLink TX/RX modules

1:1 power-supply redundancy (hot-swap)

Front side LC-Display & keypads for local configuration

Remote access and configuration via Web-Interface, SNMP

LED´s displaying laser, link, psu & access status

1RU/19", 260mm deep

<10W

DB9-female

2 (for TX/RX modules)

ETS300019, Part 1-3,Class 3.1

(Mixed possible)

(1:1 redundant, hot-swapp.)

Mechanical dimension:

Power consumption:

1:1 psu alarm connector:

Optical module slots:

Environmental condit.:

Power-supply:

RoHS:

85...230V, 50/60Hz

Compliant

(potential free)

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

3RU/19" modular opticial transmission chassis

Modular, professional and secure signal transmission

Up to 16 RF signals over fiber transmission

Insertion of max. 16 ProLink TX/RX modules

1:1 power-supply redundancy (hot-swap)

Front side 5,7" touchscreen for local configuration

Remote configuration via Web-Interface, SNMP

LED´s displaying laser, link, psu & access status

3RU/19". 295mm deep

85...230V, 50/60Hz

<60W

DB9-female

16

ETS300019, Part 1-3,Class 3

(Mixed pos.)

(1:1 redundant, hot-swapp.)

(potent. free)

(for TX/RX modules)

Mechanical dimension:

Red. Power-supply:

Power consumption:

1:1 psu alarm connector:

Optical module slots:

Environmental condit.:

RoHS: Compliant

SPECIFICATIONS

ProLink TX/RX ChassisProLink TX/RX chassis FLC102 & FLC316

Pro

Lin

k R

F-o

ver-

Fib

er

TX

/RX

Ch

assis

SPECIFICATIONS

Made

inGermany

TECHNICAL SPECIFICATIONS

ProLink Optical modulesProLink optical modules FLTXI-S/FLRXI-S, FLTXL-S/FLRXL-S

Pro

Lin

k R

F-o

ver-

Fib

er

op

tical m

od

ule

s

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range

RF Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Input noise floor:

Spurious free dyn. range:

Operating wavelength:

Optical power / Connectors:

RF connectors:

Port matching:

Gain adjustment

RF power measurement:

: 10...200MHz

0dBm max.

0,5dB typ./ 1,0dB max.

18dB

< -56dBc

> -133dBm/Hz

109dB/Hz

1310nm

2dBm / E2000 or SC/APC*

50Ohm SMA (f) or75Ohm BNC(f)

all ports 18dB

MGC/AGC -15...+15dB

60dB

± ±

( VSWR: 1:1.29)

( C/N: 57dB min. @36MHz)

!

!

*upon request

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS: Compliant

FLRXI-S optical receiver IF

FLTXI-S optical transmitter IF

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range

RF Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Input noise floor:

Spurious free dyn. range:

Operating wavelength:

Optical power / Connectors:

RF connectors:

Port matching:

Gain adjustment:

RF power measurement:

LNB supply:

: 950...2150MHZ

0dBm max.

0,5dB typ./ 1,0dB max.

16dB

< -60dBc

> -133dBm/Hz

109dB/Hz

1310nm

2dBm / E2000 or SC/APC*

50Ohm SMA(f)or 75Ohm F(f)

all ports 16dB

MGC/AGC -15...+15dB

70dB

± ±

( VSWR: 1:1.38)

( C/N: 57dB min. @36MHz)

!

!

*upon request

13/15/18V, 22kHz,400mA

Compliant

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS:

FLRXL-S optical receiver L-Band

FLTXL-S optical transmitter L-Band

FLTXI-S/FLRXI-S MODULES (IF) FLTXL-S/FLRXL-S MODULES (L-Band)

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range:

Optical Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Noise floor:

Spurious free dyn. range:

Operating wavelength:

RF / Optical connectors:

Gain adjustment

RF output power:

RF power measurement:

10...200MHz

+10dBm

0,5dB typ./ 1,0dB max.

18dB

< -56dBc

> -133dBm/Hz

109dB/Hz

1310 - 1560nm

50Ohm SMA (f) or75Ohm BNC(f) /E 2000 or SC/APC*

MGC/AGC -15...+15dB

+10dBm

60dB

± ±

( VSWR: 1:1.29)

( C/N: 57dB min. @36MHz)

!

!

*upon request

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS: Compliant

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range:

Optical Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Noise floor:

Spurious free dyn. range:

Operating wavelength:

RF / Optical connectors:

Gain adjustment

RF output power:

RF power measurement:

950...2150MHz

+10dBm

0,5dB typ./ 1,0dB max.

16dB

< -60dBc

> -133dBm/Hz

109dB/Hz

1310 - 1560nm

50Ohm SMA(f)or 75Ohm F(f)E 2000 or SC/APC*

MGC/AGC -15...+15dB

+10dBm

70dB

± ±

( VSWR: 1:1.38)

( C/N: 57dB min. @36MHz)

!

!

*upon request

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS: Compliant

Made

inGermany

RF-Out

Opt.-I

n

FLTXLFLRXL

RF-In

Op

t.-O

ut

RF-Out

Op

t.-I

n

FLTXLFLTXI FLTXLFLRXI

RF-In

FLTXLFLTXL

The RedLink RF-over-Fiber redundant chassis FLCR101 (1RU/19") and FLCR416 (4RU/19") allow flexible, high quality andmost secure optical distribution of max. 16 L-Band and/or IF signals in 1:1 redundant operation. The FLCR101 chassis can beequipped with 2 optical modules (TX/RX) while one is actively operating and 1 hot-standby so to assure a 1:1 opticaltransmission redundancy. The FLCR416 can be equipped with 32 optical modules (TX/RX) while 16 are actively operating and16 hot-standby assuring a 1:1 optical transmission redundancy. The units are designed to allow mixed configurations so toinsert IF and/or L-Band TX-, and/or RX modules within the same chassis. The chassis is furthermore equipped with 16 RFinput and outputs, acting eihter as input or output interfaces, as per the individual configuration. The redundancy switching canbe realized manually via the front panel touchscreen but also remotely via the Ethernet-Interface (http/SNMP). Furthermore thesystem features an automatic redundancy switching as per preconfigured adjustments. Once an error for an TX or RX moduleoccurs an error message can be sent out by SNMP and the activation of the hot-standby redundant module will be done asconfigured, manually or automatically. The redundant RedLink system features a front side 8" LCD touch screen as well asremote interfaces for remote acces and configuration. Besides this the Redlink features Laser, Link and RF power monitoring,gain adjustment as well as LNB-supply.

GENERAL

FLCR416 1:1 REDUNDANT CHASSIS

RedLink Redundant TX/RX ChassisRedLink redundant TX/RX chassis FLCR101 & FLCR416

Red

Lin

k r

ed

un

dan

t T

X/R

X C

hassis

FLCR101 1:1 REDUNDANT CHASSIS

FEATURES FEATURESØ

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

1RU/19" opticial transmission chassis

Pofessional; stable and secure signal transmission

1 active RF signal over fiber transmission

Insertion of max. 2 TX/RX modules (1 active/1 hot-standby)

Supports mixed configurations for IF/ L-Band & TX/RX

1:1 TX/RX redundancy (hot-swappable)

Manual and automatic redundancy switching

1:1 power-supply redundancy (hot-swappable)

Front side LC-Display & keypads for local configuration

Remote access and configuration via Web-Interface, SNMP

LED´s displaying laser, link, psu & access status

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

4RU/19" 1:1 redundant opticial TX/RX chassis

Pofessional, stable and secure signal transmission

Up to 16 active RF signals over fiber transmission

Insertion of max. 32 TX/RX modules

Supports mixed configurations for IF/L-Band & TX/RX

1:1 TX/RX redundancy (hot-swappable)

Manual and automatic redundancy switching

1:1 power-supply redundancy (hot-swappable)

Front side 8" LCD color touchscreen

Remote configuration via Web-Interface, SNMP

LED´s displaying laser, link, psu & access status

(16 active/16 hot-standby)

SPECIFICATIONS SPECIFICATIONS

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Mechanical dimension:

Power-supply:

Power consumption:

Frequency-ranges:

RF Inputs/Outputs:

RF-Connectors

1:1 psu alarm connector:

2 module slots:

RoHS:

1RU/19", 260mm depep

85...230V, 50/60Hz (1:1 redundant)

<10W

IF 10...200MHz / L-Band 950...2.15GHz

2

: 50Ohm SMA(f) or 75Ohm F(f)

DB9-female (potential free)

1 active/hot-standby TX/RX

Compliant

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Mechanical dimension:

Power-supply:

Power consumption:

Frequency-ranges:

RF Inputs/Outputs:

RF-Connectors:

1:1 psu alarm connector:

32 module slots:

RoHS:

4RU/19", 295mm deep

85...230V, 50/60Hz (1:1 redundant)

<100W

IF 10...200MHz and/orL-Band 950...2.15GHz

16

50Ohm SMA(f) or 75Ohm F(f)

DB9-female (potential free)

1...16 active/hot-standby TX/RX

Compliant

Made

inGermany

RedLink Redundant optical modulesRedLink redundant optical modules FLTXI-R/FLRXI-R, FLTXL-R/FLRXL-R

Red

Lin

k r

ed

un

dan

t o

pti

cal m

od

ule

s

TECHNICAL SPECIFICATIONS

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range

RF Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Input noise floor:

Spurious free dyn. range:

Operating wavelength:

Optical power / Connectors:

RF connectors:

Gain adjustment :

RF power measurement:

Status LED´s:

: 10...200MHz

0dBm max.

0,5dB typ. / 1,0dB max.

18dB

< -56dBc

> -133dBm/Hz

109dB/Hz

1310nm

2dBm / E2000 or SC/APC*

50Ohm SMA (f) or75Ohm BNC(f)

MGC/AGC -10...+10dB

60dB

OK, Fail

± ±

( VSWR: 1:1.29)

( C/N: 57dB min. @36MHz)

!

!

*upon request

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS: Compliant

FLRXI-R optical redundant Receiver, IF

FLTXI-R optical redundant Transmitter, IF

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range

RF Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Input noise floor:

Spurious free dyn. range:

Operating wavelength:

Optical power / Connectors:

RF connectors:

Gain adjustment:

RF power ameasurement:

Status LED´s:

LNB supply:

: 950...2150MHz

0dBm max.

0,5dB typ./ 1,0dB max.

16dB

< -60dBc

> -133dBm/Hz

109dB/Hz

1 1310nm

2dBm / E2000 or SC/APC*

50Ohm SMA (f)or 75Ohm F(f)

MGC/AGC -10...+10dB

70dB

OK, Fail; Stand-by

13V, 18V & 22kHz,400mA

± ±

( VSWR: 1:1.38)

( C/N: 57dB min. @36MHz)

!

!

*upon request

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS:

FLRXL-R optical redundant Receiver, L-Band

FLTXL-R optical redundant Transmitter L-Band

FLTXI-R/FLRXI-R MODULES (IF) FLTXL-R/FLRXL-R MODULES (L-Band)

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range:

Optical Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Noise floor:

Spurious free dyn. range:

Operating wavelength:

RF output power:

RF / Optical connectors:

Gain adjustment:

RF power measurement:

Status LED´s:

950...2150MHz

+10dBm

0,5dB typ./ 1,0dB max.

16dB

< -60dBc

> -133dBm/Hz

109dB/Hz

1310 - 1560nm

+10dBm

50Ohm SMA(f)or 75Ohm F(f)E 2000 or SC/APC*

MGC/AGC -10...+10dB

70dB

OK, Fail; Stand-by

± ±

( VSWR: 1:1.38)

( C/N: 57dB min. @36MHz)

!

!

(*upon request)

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Ø

Frequency range:

Optical Input level:

Frequency response:

Return loss:

IMA3 @ -10dBm:

Noise floor:

Spurious free dyn. range:

Operating wavelength:

RF output power:

RF / Optical connectors:

Gain adjustment:

RF power measurement:

Status LED´s:

10...200MHz

0dBm max.

0,5dB typ. / 1,0dB max.

18dB

< -56dBc

> -133dBm/Hz

109dB/Hz

1310 - 1560nm

+10dBm

50Ohm SMA(f)or 75Ohm BNC(f)E 2000 or SC/APC*

MGC/AGC -10...+10dB

60dB

OK, Fail; Stand-by

± ±

( VSWR: 1:1.29)

( C/N: 57dB min. @36MHz)

!

!

Operating temperature:

Storage temperature:

Humidity:

0...45°C

-20°C...70°C

90% non-condensing

RoHS: Compliant

Made

inGermany

Fib

erL

ink R

F-o

ver-

Fib

er

seri

es

FEATURE TABLE

APPLICATION EXAMPLE

The FiberLink RF-over-Fiber series features various possibilitis for efficient and high performance opticaldistribution of IF and L-Band signals. This system is ideally suited for the Satellite, broadcast and broadbandcommunications industry and applicable for Teleports, Up- and downlink stations, broadcasting operations aswell as cable- and IPTV RF-distribution infrastructures.

GENERAL

FiberLink RF-over-Fiber seriesEcoLink, ProLink & RedLink optical transmission systems

Made

inGermany

© 01/2014 RF-Design (Rev.04) Subject to modifications

RF-Design | Marienburger Str. 3 | 64653 Lorsch | Germany

HQ / R&D / Manufacturing: Tel: +49 (0) 6251 9389 85 | Fax: +49 (0) 6251 9389 87 | www.rf-design-online.de | eMail: [email protected]/Marketing/Projects: Tel: +49 (0) 361 7896 2340 | Mob.: +49 (0) 175 4379 860 | www.rf-design-online.de | eMail: [email protected]