-
Form 2091-1.00/081607 Page 1
PRIMUS Bio Pharma® – Medium Steam SterilizersThese sterilizers
are for customers who require a high quality steam pressure
sterilizer whose products, operationsand manufacturing facilities
are regulated by the FDA. PRIMUS Sterilizers, designed and
manufactured in theUSA according to Quality Management Systems, are
in compliance with ISO9001:2000, ISO 13485 and FDA’sGood
Manufacturing Practice (GMP) for Medical Devices: General
Regulation (21CFR Part 820). Medium sizesterilizers are one of 19
standard sizes manufactured by PRIMUS, or we can custom manufacture
a sterilizer tomeet your specifications.
SPECIFICATION
26”x36”x48” shown with optional right hand controls
DA
TA
SH
EET
PRIMUS Bio Pharma sterilizers are designed for awide range of
sterilizing applications suitable for thelaboratory or
pharmaceutical industry. Qualitymaterials and workmanship have been
incorporatedinto the chamber, piping and controls to provide
apharmaceutical sterilizer that exceeds industrystandards. Bio
Pharma sterilizers are designed forfully automatic,
computer-controlled, operations withvacuum or gravity displacement
cycles for terminalsterilization to in-process sterilization of
packagingcomponents to production equipment sterilization.Bio
Pharma sterilizers are the choice whenversatility, rigorous
tolerances and validatable resultsare essential. The sterilizer is
designed,manufactured and tested at the PRIMUSBio Pharma factory in
Omaha, Nebraska USA.
All medium sizez of PRIMUS sterilizers havepneumatically powered
horizontal operating doors,designed to be efficient, reliable and
inherently safe.To close the door, press and hold the door button,
ifbutton is released before door is fully closed the door
STERILIZER DESIGN
Standard cycles can be configured through the use ofthe cycle
parameters to process hard goods, wrappedgoods or liquid type
products. Configuration of thecycle parameters (i.e., number of PRE
or POST-PULSES, EXHAUST & DRY, etc.) is unique to eachcycle and
depends upon the specific product beingsterilized. Standard cycles
can be designed for steamsterilization of various types of dry
goods or liquidproducts. Dry good products such as filter
housingsand cartridges, textiles, rubber stoppers or
sterilizableplastic packaging may require preconditioning for
airremoval from the top of flasks. A slow exhaust is usedfor liquid
products with Jacket Off and Flow Coolingselected after exposure to
reduce boil-over.
PRIMUS Pri-Matic® controls offer the user access tothirteen
password-protected cycles. Cycle parametersfor each cycle are
baselined, validate and “locked” byvalidation personnel. Cycle can
be custom named toassist and confirm operator selection of correct
cycle.
STERILIZER CYCLES
PRIMUS Sterilizer Company, LLC • 117 South 25th Street • Omaha,
NE 68131Phone (402) 344-4200 • Fax (402) 344-4242 •
[email protected] • www.primus-sterilizer.com
®
opens. An added safety feature, the doors stopautomatically if
an obstacle is encountered.
-
Form 2091-1.00/081607 Page 2
GENERAL (Options italicized)All models include Vacuum, Gravity
and Liquidscycles.
VESSEL MATERIAL AND CONSTRUCTIONThe sterilizer features a SA240
TY316L stainlesssteel (SS) rectangular, horizontal
completelyjacketed chamber, with fully radiused longitudinalcorners
which are fully welded and mirror polishedto provide the most
hygienic, long lastingappearance and durability available. The
chamberhas a full-length baffle and one drain positioned inthe
chamber to maximize steam distribution andcross flow within the
chamber.
E 26”x36”x39” G.1 32”x36”x48”F 26”x36”x48” H 36”x42”x60”G
26”x36”x60” I 36”x42”x84”
The jacket is constructed of SA240 TY304 SS andis mounted to the
chamber over channel supportsdesigned to achieve uniform
distribution of steam.The jacket enables the stabilization of
temperaturearound the chamber thereby reducing the timerequired to
bring the chamber up to sterilizationtemperature, providing
superior temperaturedistribution, and preventing the formation
ofcondensation on the chamber walls.
DESIGN and MANUFACTURING APPROVALSThe vessel will be designed
and constructed toASME code Section VIII Division I and
pressurerated for 45 PSIG and full vacuum. ASME CodeStamp and U-1
form will bear the name of thespecified US manufacturer.
The sterilizer will be manufactured according toQuality
Management Systems which are incompliance with ISO 13485 and
9001:2000, will beUL listed and in conformance with
CSArequirements.
DOOR CONSTRUCTIONA pneumatically operated horizontally sliding
doorwill be operable from the touchpad push button. Toclose door,
depress/hold door button. If doorbutton is released while door is
closing, doorreverses direction and opens. In the open position,the
insulated door will be secured behind a panelpreventing the
operator from contact with hotsurfaces. An interlock will prevent
cycle startunless the door is fully closed and secured.
GENERAL CONSTRUCTIONThe vessel will be insulated with 1"
semi-rigid hightemperature fiberglass board/blanket
insulationoverlaid with formed aluminum paneling andmounted in a
structural steel frame. The frame willbe enamel coated and fitted
with adjustable legson self-centering floor pads. The fascia and
sidepanels will be 16-gauge, type 304 stainless-steel,removable for
easy service access.
PURCHASING SPECIFICATION DATA SHEETS
PEC
IFIC
ATIO
N D
ATA
SH
EET
PRI-MATIC® CONTROL PANELS WITH PRINTER
EQUIPMENT WARRANTYSterilizer pressure vessels manufactured
byPRIMUS are warranted against defects inworkmanship and materials
under normal use andoperation for fifteen years where the
sterilizer iscontinually maintained under PRIMUS
servicecontract.
SERVICE and EQUIPMENT ACCESSStandard service access, when facing
the unit, willbe from left side and top. Wiring will be laid
side-by-side and mechanically secured flat against themetal
insulation cover. All wiring will be clearlylabeled and readily
visible for visual tracing. Allsterilant piping in the product
contact circuit iscomposed of stainless steel with high
qualityCLEAN IN Place (CIP), flanged, sanitary fittings.Sanitary
pipe clamps are located anywhere CGMPProcedures require frequent
maintenance access toprocess piping to allow ease of routine
cleaning andmaintenance. Wiring and piping components will
benon-proprietary, industry grade, available throughAuthorized
Service Agencies, local supply house, ordirect from PRIMUS.
STEAM SOURCESteam will be from an in-house steam source in
thequantity and quality specified. Optional electricsteam boiler,
clean steam boiler or steam-to-steamgenerator may be specified.
Contact PRIMUS forspecific boiler information.
CONTROLSThe Pri-Matic® Control System uses the Allen-Bradley
SLC500 Programmable Logic Controller(PLC) with an Allen-Bradley
Panel View 1000Operator Interface Terminal (OIT) and the
Pri-Matic®software package to provide automatic cycleoperation. The
control system hardware is mountedwithin a separate control
cabinet. The systemfeatures Pulse Width Modulation (PWM)temperature
control. The PLC software meets orexceeds industry standards, is
fully documented,validated and maintained under strict
configurationcontrol.
-
Form 2091-1.00/081607 Page 3
PRIMUS PRIMUS PRIMUS PRIMUS PRIMUS BioBioBioBioBio
PharPharPharPharPharmamamamama® – Medium Steam Medium Steam Medium
Steam Medium Steam Medium Steam
AAAAAutocutocutocutocutoclalalalalavvvvveseseseses
LEDOM E F G 1.G H I
eziSrebmahC)lxhxw(
sretemillim/sehcni
93x63x626.099x4.419x4.066
84x63x622.9121x4.419x4.066
06x63x624251x4.419x4.066
84x63x232.9121x4.419x8.218
06x24x634251x8.6601x4.419
48x24x636.3312x8.6601x4.419
yticapaCrebmahC tf12 3 / m95. 3 tf62 3 m47./ 3 tf33 3 / m39. 3
tf23 3 m19./ 3 tf5.25 3 / m94.1 3 tf5.37 3 m80.2/ 3
htdiWllarevO 4.419/00.63 4.419/00.63 4.419/00.63 60.1311/35.44
8.6221/13.84 8.6221/13.84
thgieHllarevO 1 4.0702/00.18 4.0702/00.18 4.0702/00.18
4.0702/00.18 4.4812/00.68 4.4812/00.68
)DS(htgneLllarevO 2 20.1531/91.35 26.9751/91.26 4.4881/91.47
8.1061/61/136 2.8091/31.57 8.7152/31.99
htdiWgninepOllaW 3 0.4312/0.48 0.4312/0.48 0.4312/0.48
0.8342/0.69 0.3472/0.801 0.3472/0.801
thgieHgninepOllaW 0.2302/00.08 0.2302/00.08 0.2302/00.08
0.2302/00.08 9512/00.58 9512/00.58
htgneLgninepOllaW 1.8031/05.15 7.6351/05.06 5.1481/05.27
2361/52.46 57.6391/52.67 4.6452/52.001
htdiWaicsaF 1 0.4312/0.68 0.4312/0.68 0.4312/0.68 0.9842/0.89
0.4972/0.011 0.4972/0.011
thgieHaicsaF 4.0702/00.18 4.0702/00.18 4.0702/00.18 4.0702/00.18
4.4812/00.68 4.4812/00.68
rebmahCotroolF 6.906/00.42 6.906/00.42 6.906/00.42 6.906/00.42
6.906/00.42 6.906/00.42
1. Fascia extends 1” beyond wall opening on each side
overlapping the wall and sealing the opening.2. Allow minimum 2”
clearance at rear of recessed unit only. Cabinet side models have
rear clearance built in.3. Contact PRIMUS for alternative wall
opening.4. Standard Left Side Service/equipment access shown.
Optional right side access is available.
*Refer to General Arrangement (GA) drawings for details and
final connection point to utility services (S-Steam, W-Water,
D-Drain, E-Electrical).
VOLUME/DIMENSIONS CHART
SPEC
IFIC
ATIO
N D
ATA
SH
EET
®
SINGLE DOOR
S1S W EA E1
D
DW S
E1
AE
S1
D
S1
AW S
EE
1
WD
S1
A
S
E1
E
TYPICAL ACCEPTED RANGES
Service access space
Typical floor drain and
ancillary equipment area.
-
Form 2091-1.00/081607 Page 4
VOLUME/DIMENSIONS CHART
LEDOM E F G 1.G H I
eziSrebmahC)lxhxw(
sretemillim/sehcni
93x63x626.099x4.419x4.066
84x63x622.912x4.419x4.066
06x63x624251x4.419x4.066
84x63x232.9121x4.419x8.218
06x24x634251x8.6601x4.419
68x24x636.3312x8.6601x4.419
yticapaCrebmahC tf12 3 / m95. 3 tf62 3 / m47. 3 tf33 3 / m39. 3
tf23 3 / m19. 3 tf5.25 3 / m94.1 3 tf5.37 3 / m80.2 3
htdiWllarevO 4.419/00.63 4.419/00.63 4.419/00.63 6.1311/35.44
8.6221/13.84 8.6221/13.84
thgieHllarevO 1 4.0702/00.18 4.0702/00.18 4.0702/00.18
4.0702/00.18 4.4812/00.68 4.4812/00.68
)DD(htgneLllarevO 2 9.5841/05.85 5.4171/05.76 3.9102/05.97
93.7071/22.76 1.6102/83.97 7.5262/83.301
htdiWgninepOllaW 3 0.4312/0.48 0.4312/0.48 0.4312/0.48
0.8342/0.69 0.3472/0.801 0.3472/0.801
thgieHgninepOllaW 0.2302/00.08 0.2302/00.08 0.2302/00.08
2302/00.08 9512/00.58 9512/00.58
htgneLgninepOllaW 68.2921/09.05 64.1251/09.95 62.6281/09.17
8.4751/00.26 4.4881/91.47 4942/91.89
htdiWaicsaF 1 0.4812/0.68 0.4312/0.68 0.4812/0.68 9842/0.89
0.4972/0.011 0.4972/0.011
thgieHaicsaF 4.0702/00.18 4.0702/00.18 4.0702/00.18 4.0702/00.18
4.4812/00.68 4.4812/00.68
rebmahCotroolF 6.906/00.42 6.906/00.42 6.906/00.42 6.906/00.42
6.906/00.42 6.906/00.42
1. Fascia extends 1” beyond wall opening on each side
overlapping the wall and sealing the opening.2. Allow minimum 2”
clearance at rear of recessed unit only. Cabinet side models have
rear clearance built in.3. Contact PRIMUS for alternative wall
opening.4. Standard Left Side Service/equipment access shown.
Optional right side access is available.
SPEC
IFIC
ATIO
N D
ATA
SH
EET
*Refer to General Arrangement (GA) drawings for details and
final connection point to utility services (S-Steam, W-Water,
D-Drain, E-Electrical).
PRIMUS PRIMUS PRIMUS PRIMUS PRIMUS BioBioBioBioBio
PharPharPharPharPharmamamamama® – Medium Steam Medium Steam Medium
Steam Medium Steam Medium Steam
AAAAAutocutocutocutocutoclalalalalavvvvveseseseses®
DOUBLE DOORWS S1 EA E1
D
WA
E1
E
S
S1
D
W
D
S
EA
E1
S1 W
D
S
EA
E1
S1
TYPICAL ACCEPTED RANGES
Service access space
Typical floor drain and
ancillary equipment area.
-
Form 2091-1.00/081607 Page 5
HVAC DATA Heat loss, at ambient of 700 F.
1. Allow sufficient space for traps, shut-off’s, filters and
other utility supply components.2. Utility (service disconnects)
shall be provided and installed “By Others”.3. Building or
structure modifications to accommodate the sterilizer, as well as,
sterilizer shoring, rigging,
cribbing and/or crane requirements into the facility shall be
provided “By Others”.4. Provide maximum mechanical and service
access space, a minimum of 24”, additional space required
when boiler specified. See General Arrangement drawing for
placement of ancillary equipment and serviceaccess.
5. Some options affect utility services and overall
dimensions.6. Water Quality - Refer to page 8.7. The Manufacturer’s
Equipment Warranty does not cover failure due to improper utility
provisions.8. Drawings not to scale.9. Wall thickness must be
provided on single and double door models recessed through 1 wall,
with cabinet
sides.10. Floor under sterilizer must be water tight and sloped
to the drain.
ARCHITECTURAL NOTES:
LEDOM RH/S'UTBK
:ROODELBUOD,llawenohguorhT
aicsafta
EHG
1.GHI
5552.58.68.6
:ROODELBUOD,llawenohguorhT
aeraecivres
EHG
1.GHI
3.2131618.31
513.61
:ROODELBUOD,sllawowthguorhT
aicsafhcaeta
EHG
1.GHI
5552.58.68.6
:ROODELBUOD,sllawowthguorhT
aeraecivres
EHG
1.GHI
9.68012.99.72.01
LEDOM RH/S'UTBK
:ROODELGNIS,llawenohguorhT
aicsafta
EFG
1.GHI
5552.58.68.6
:ROODELGNIS,llawenohguorhT
aeraecivres
EFG
1.GHI
5.79
8.112.215.013.21
:ROODELGNIS,gnidnatseerF
latottenibac
EFG
1.GHI
3.314161611.613.61
SPEC
IFIC
ATIO
N D
ATA
SH
EET
)S(MAETSmaetSeruP
ylppuS"1:eziSepiP.
*yratinaS
pmalCirT=CT*
)1S(MAETSylppuSmaetSgnidliuB
. epiP eziS woleBeeS:
. :ytilauQ etasnednoCeerf 001ot%79 %
ropavdetarutasotdeppartylbatius(
dnamaetsyrderusneevomerotderetlif
)setalucitrap. erusserP : GISP08-05
cimanyD
:etoNmaets-ot-maetS).1
seriuqerrotarenegerusserpmuminim
esuohGISP56maets
)W(RETAWylppuSretaWdloC
. epiP eziS woleBeeS:
. erutarepmeT : < 07 o F
. erusserP : GISP07-05cimanyD
)D(NIARDmetsySniarDgnidliuB
"2muminiM
. noitacoL : roolfetacoLrednuyltceridknis
rezilirets
:etoN).1 siegrahcsidtsuahxE
otdelooc < 041 oF"8x"21x"21).2
siknisroolfdednemmocer
SUMIRPyb
)A(riAriAtnemurtsnI
. :noitcennoC woleBeeS
. ytilauQ : eerfliodnayrD
. erusserP : ISP08-06cimanyD
)E(LACIRTCELErewoPgnidliuB
ylppuS. stloV 011:. esahP : elgniS. spmA : 01
:etoNstiucriclanoitiddA
rofderiuqerdnayrallicna
tnempiuqelanoitpo,pmupmuucav,.e.i,reliob,pmuptsoob
.cte
LEDOM *CT RH/SBL)RH/GK(
TPN RH/SBL)RH/GK(
TPN )XAM(MPG)retiL(
TPN)eziSepiPegrahcsiD(
TPN
E "1 1.251)99.86(
"4/3 )66.67(0.961 "4/3 )35(41 "1 "4/1
F "1 0.081)56.18(
"4/3 )27.09(0.002 "4/3 )35(41 "1 "4/1
G "1 0.432)1.601(
"1 )49.711(0.062 "4/3 )35(41 "1 "4/1
1.G "1 4.032)5.401(
"1 )21.611(0.652 "4/3 )35(41 "1 "4/1
H "1 0.513)9.241(
"1 )67.85(0.053 "1 )35(41 "4/11 "4/1
I "1 0.873)5.171(
"1 )15.091(0.024 "1 )17.57(02 "4/11 "4/1
UTILITY SERVICESProvide utility services within 6’-0” of final
connection to sterilizer. Optimum sterilizer performancerequires
the specified utilities.
-
Form 2091-1.00/081607 Page 6
SPEC
IFIC
ATIO
N D
ATA
SH
EET
ELECTRIC BOILERSBEBC Electric Heated Boiler - Stainless steel
construction for clean steam generation. Includes
stainless steel feedwater boost pump.NOTE: Stainless Steel
Boilers shall be operated using only deionizedwater, having a
maximum conductance of 1 microSeimen per cm(1 S/cm) [minimum
specific resitivity of 1 megohm per cm (1MW/cm)].
LEDOM E F G
eziSrebmahCsretemillim/sehcni)lxhxw(
93x63x629121x0061x4.066
84x63x620391x0061x4.066
06x63x629121x8411x988
eziSreiloB .rH/Wk 0.06 0.27 0.801
tuptuOmaetSrelioB rH/.sbl 181 712 523
enolAdnatS ledoM E-BE F-BE G-BE
hP3,802.C.A.V serepmA 761 002 003
hP3,042.C.A.V serepmA 541 471 062
hP3,084.C.A.V serepmA 37 78 031
.zH06,011.C.A.V 1 serepmA 01 01 01
LEDOM 1.G H I
eziSrebmahCsretemillim/sehcni)lxhxw(
84x63x239121x0061x4.066
06x24x630391x0061x4.066
48x24x639121x8411x988
eziSreiloB .rH/Wk 801 441 851
tuptuOmaetSrelioB rH/.sbl 523 334 574
enolAdnatS ledoM 1.G-BE H-BE I-BE
hP3,802.C.A.V serepmA 003 004 A/N
hP3,042.C.A.V serepmA 062 743 973
hP3,084.C.A.V serepmA 031 371 091
.zH06,011.C.A.V 1 serepmA 01 01 01
1. Controls Current N/A - Not Available
S S
DD
W
E/E1E/E1
-
Form 2091-1.00/081607 Page 7
SPEC
IFIC
ATIO
N D
ATA
SH
EET
STEAM TO STEAM GENERATOR (SCS1 & SCS2)
Steam to Steam Generator used to generate either clean or pure
steam. The preferred method of generatingClean or Pure steam, when
house steam is available to drive the generator. Converts to steam,
whateverquality water is delivered.
BSCS1 Pure Steam - stainless steel steam to steam generator with
sanitary fittings, double tubesheet construction. Generated from
WFI quality depyronegated water. Thewater source to the Pure Steam
Generator is either house generated or “ByOthers”.
BSCS2 Clean Steam - stainless steel steam to steam generator
with threaded fittings, threadedconnections and single tube
construction. Generated from distilled or reverseosmosis water.
Clean Steam sterilizers normally include stainless steel pipingfor
all wetted surfaces in the product loop.
NOTE: Refer to Page 8 for information on Water Quality.Refer to
the boiler/steam to steam generator maintenance manualprovided with
the sterilizer prior to using any boiler treatment
chemicals.Contact PRIMUS for further recommendations.
W1
D1
E2
S3
S4
-
Form 2091-1.00/081607 Page 8
Note: Use the above format to determine PRIMUS Model numberand
insert below and on Page 15, Specification Worksheet.
Use the following pages to custom design your sterilizer by
checking the boxes of the configurationand options required for
your project. Transfer all items checked to the Specification
Worksheet (Pages15 & 16) and fax to PRIMUS Sales Department or
to your local Sales Representative for a quotation. Ifyou do not
find an option or size listed to meet your requirements, please
contact our Project Managerfor additional information and
assistance.
Five models are offered:E - 26" x 36" x 39"F - 26" x 36" x 48"G
- 26" x 36" x 60"G.1 - 32" x 36" x 48"H - 36" x 42" x 60"I - 36" x
42" x 84"
A detailed formatted specification,suitable for inclusion in
formal contractdocuments, is available on request.
Model Number Notation SD = Single Door DD = Double Door
PSS_-__-M__ __ E S = House Steam
F E = Electric BoilerG P = Steam to SteamG.1HI
Steam Source
SELECT CONFIGURATION
BGDA - Single DoorBDB - Double Door
Cabinet BCD - Panels Both sides BCCL - Left Side Panel BCCR -
Right Side Panel
Door Recessed BCA - One wall BCB - Two walls
Left Side (Standard) Right Side
Service and Equipment Access
PRIMUS General Purpose Steam Pressure Sterilizer, Model Number
PSS__________.
1. Electric boilers are available in Carbon Steel or Stainless
Steel.2. Contact PRIMUS for overall dimensions and utility
connections.3. All models are stand-alone.4. GMP Validatable Option
Only, sanitary piping required.5. Low Water Cutoff is standard and
the “automatic reset” feature is disabled with this option. The
boiler will
need to be manually rest.6. Water Quality - For best results,
feed water supply should be evaluated prior to initial startup to
ensure it is
of the quality necessary for the application, various external
treatment processes (water softener, waterconditioning, etc.) may
be used. Contact PRIMUS for further recommendations.
SPEC
IFIC
ATIO
N D
ATA
SH
EET
Pri-Matic = 6ControlLogix = 7
Steam to Steam2BSCS1 - Pure Steam Dbl TubeBSCS2 - Clean Steam
Sgl TubeBSCS4 - Clean Steam Sgl Tube SanitaryOther
House Supply Clean Steam2 BEBC1 - 208/3 phase3 BEBC2 - 240/3
phase3 BEBC3 - 480/3 phase3
Other BEB05 - Auto Blowdown
-
Form 2091-1.00/081607 Page 9
SPEC
IFIC
ATIO
N D
ATA
SH
EET
Clean Steam Sterilizers BP9For cell/tissue culture applications.
This option providesdirect connection to a house-source of clean
steam.Includes threaded stainless piping and components tochamber.
If clean steam is only steam source, specifyoption BP9.1 for
stainless piping to jacket. For alternatesources to generate clean
steam, specify electric cleansteam boilers (stainless steel), or
when house steam isavailable, specify steam-to-steam generators.
(Stainlesssteel heat exchanger).
BP9 Stainless piping to chamber - threadedBP9.1 Stainless piping
to jacket - threadedBEBC Clean Steam Stainless Electric
Boiler (specify voltage) BSCS1* Pure Steam Double Tube
Sheet,
Sanitary ConnectionsBSCS2* Clean Steam Single Tube Sheet
with threaded connectionsBSCS3* Clean Steam Single Tube,
Sanitary
Connections
*Contact PRIMUS for alternate steam generatoroptions.
PHARMACEUTICAL CONFIGURATIONS Air-over Cooling BP11
Provides a means of rapidly cooling sterilized load.Effective to
decrease cycle times with liquid loads.Filtered ambient air
displaces steam during exhaustcycle to rapidly cool load and
prevent boil-over.
CLEAN-IN Place Piping BP15CLEAN-IN Place (CIP) piping is
standard for allpiping in the product contact circuit. CIP piping
hasan interior finish
-
Form 2091-1.00/081607 Page 10
SPEC
IFIC
ATIO
N D
ATA
SH
EET Sterilize Filter Cycle BC13Sterilize filter is a stand-alone
cycle used to sterilize
the 0.2 micron sterile air filter, filter housing andrelated
piping.
Authorized Operator Access BC32Restricts operation of sterilizer
to authorizedpersonnel and provides supervisor with PIN numberof
person running the cycle. Access levels areavailable for
administrator, supervisor and operatorlevel groups.
CONTROLS AND RELATED OPTIONS (CONT’D) Remote Mount Control Panel
BC10
Mount control panel in separate housing adjacent toor up to 100
feet away from the sterilizer. Available onboth control
systems.
Thermal Printer BR7Thermal dot-matrix printer with take-up reel
and 32characters per line printing is standard. Secondsterilization
cycle report available at the end of therun.
Conax Adapter BC5Provides two (2) 316L SS CIP chamber
penetra-tion, for validation purposes. Conax Adapterprovides a
compression gland inside the port,through which 1-24 thermocouple
leads are fed tothe chamber interior.
Remote Signaling of Sterilizer Status BC23Control relay
connection enabling operation of aremote signaling devise for an
alarm condition.Alarm conditions many include Door Open, DoorClosed
and Cycle complete. Signal may be usedto activate a buzzer, light
or any other On-Offdevice.
Compress Air to Gasket BP10Compressed air is used to seal gasket
againstdoor interior during cycles on Bio Pharmasterilizers.
Prolongs gasket life. Requires com-pressed air utility service, or
option BEAC air-compressor. Optional steam to gasket is
available.
BIO-CONTAINMENT OPTIONS BioSeal Flange BV6
Provides a means of isolating load from the unloadends of the
sterilizer. A vapor-proof flange is weldedto the vessel on both
sides of the flange andaround its full circumference. Penetrations
throughthe flange for electrical and piping components aresecured
with vapor proof fittings. Optional onsingle door units, standard
on double door units.
BioSeal Panels BV7Aluminum panels for attachment to, and
extendingfrom, the BioSeal Flange to adjacent buildingsurfaces to
complete the barrier between eitherend of the sterilizer.
BV10 Stainless steel in lieu of aluminum
BioSeal Fully Welded Box BV11Provides a fully welded stainless
box, welded tothe BioSeal flange forming the complete BioSeal.Check
proposed installation site. Install into wallopening with
end-opposite box BioSeal, first. Fordouble-door pass-through model
B requiring aBox BioSeal and a boiler, specify a stand-aloneboiler
.
GENERAL OPTIONS
Validation Port, 1.5 inch BV4Provides chamber penetration to
accommodatevarious monitoring/control probes. Standard on
allmodels.
Seismic Restraints BV8Required in areas prone to seismic
hazards.Secures sterilizer to building but allows for
leveling.Designed to current California Code.
Electric Vacuum Pump BP4A water-sealed electric vacuum pump is
standardon sanitary sterilizers providing a vacuum, in lieuof the
standard water ejector on non-sanitarysterilizers. Check PRIMUS’
General Arrangementdrawing to assure the required ancillary
equip-ment space is provided.
Drain Line Strainer/Valve BP25Provides a means to trap and expel
debris from thechamber drain line to protect heat exchanger
fromdamage.
Air Compressor BEACFor small size sterilizers, (less than 75 cu.
ft.), aircompressor mounted on sterilizer frame, for usewhen house
supplied air is required but not avail-able. Not available if
Air-Over Option BP11 isspecified.
-
Form 2091-1.00/081607 Page 11
SPEC
IFIC
ATIO
N D
ATA
SH
EET
SHIPPING DIMENSIONS, CUBAGE & WEIGHTSledoM
eziSreziliretSsretemillim/sehcni
E"93x"63x"62
6.099x4.419x4.066
F"84x"63x"62
2.9121x4.419x4.066
G"06x"63x"62
4251x4.419x4.066
1.G"84x"63x"23
6.4421x4.066x4.066
H"06x"24x"63
4251x8.6601x4.419
I"48x"24x"63
6.3312x8.6601x4.419
,snoisnemiDgnippihSrooDelgniS 1
5.84x52.07x579.1321x4.4871x5091
5.75x52.07x075.0641x4.4871x5091
5.96x52.07x573.5671x4.4871x5091
.902252.85x52.07x786.9741x4.4871x
5.17x88.77x5.561.6181x8791x7.3661
5.59x88.77x5.566242x8791x7.3661
,snoisnemiDgnippihSrooDelbuoD 2
94x52.07x576.4421x4.4871x5091
85x52.07x572.3741x4.4871x5091
07x52.07x578771x4.4871x5091
06x52.07x784251x4.4871x8.9022
83.27x88.77x5.563.8381x8791x7.3661
83.69x88.77x5.568442x8791x7.3661
snoisnemiDhtdiWllarevO 5091/57 5091/57 5091/57 8.9022/78
8.3642/79 8.3642/79
htdiWnwodkconKsnoisnemiD 1
9.859/57.73 9.859/57.73 9.859/57.73 3.1111/57.34 9.7421/31.94
9.7421/31.94
htiw(rooDelgniS,thgieW)gnibmulp
STHGIEWROFSUMIRPTCATNOChtiw(rooDelbuoD,thgieW
)gnibmulp
)lanoitiddA(thgieWdetarC
sthgieWgnitarCtropxErofSUMIRPtcatnoC
snoisnemiDdetarC 06x57x734251x5091x8.939
96x57x736.2571x5091x8.939
18x57x734.7502x5091x8.939
96x08x092302x4.7502
68x38x184.4812x2.8012x4.7502
011x38x184972x2.8012x4.7502
ebuCdetarC m3/tfuc79 3 m3/tfuc111 3 m4/tfuc031 3 m3/tfuc311 3
m6/tfuc402 3 m8/tfuc562 3
SEIROSSECCALANOITPO
tnempiuqEgnidaoL gk.66/sbl641 gk96/sbl251 gk99.29/sbl502
gk67/sbl661 gk821/sbl282 gk861/sbl073
relioB gk.271/sbl083 gk771/sbl093 gk5.382/sbl526 gk482/sbl526
gk653/sbl587 gk953/sbl097
UTILITY - STANDARD FEATURES
Quench Effluent on Demand to Drain BP6Assures effluent exhausted
to drain is 1400F or below,provides quench water for exhaust
effluent only ondemand, to conserve water. Standard on all
units.
Stepping Transformers BE1 Reduces line voltage to required 110
VAC for opera-tion of sterilizer controls.
BE1A 220 vac to 110 vacBE1B 480 vac to 110 vacBE1C
480/240/240/120, 1 phase, 0.5 KVA
Uninterruptible Power Supply BE2In the event of electrical power
loss and no emer-gency electrical power to sterilizer, this option
pro-vides electrical power to operate control system for upto 30
minutes, to complete the cycle. This option isdedicated power
source for the electronic controlsonly and will not supply any
power requirements forheavy power load components (boiler, pumps,
com-pressors, etc.).
Chilled Water Recirculation (ConservationSystem) BP24
Provides water conservation through the use of ChilledWater
versus City Water to cool drain effluent.Additional water
conservation is provided by reusingthe cooled drain effluent for
the water ring seal on thevacuum pump.
LOADING EQUIPMENT
Standard chamber shelving includes a fixedremovable, wire mesh
bottom shelf. As an optionextendable bottom shelf, is available.
Adjustableshelf supports are provided in 4-inch (100mm)increments.
Optional additional chambershelf(ves) may be specified.
Loading cart includes one bottom and oneintermediate shelf with
four adjustable levels.Additional shelves are available. Cart
frames andshelves are 316L stainless steel welded, groundand
polished. Shelf surfaces are stainless steelwire mesh. Transfer
carriages include swivelcasters with swivel locks and 5” wheels
withwheel brakes.
BL1 Removable Bottom ShelfBL2 Extendable Bottom ShelfBL3
Additional Chamber ShelfBL4 Loading CartBL5 Additional Cart
ShelfBL6 Transfer Carriage
NOTE: Loading cart and transfer carriages arerecommended for
chamber lengths 48 inches orlonger.
Contact PRIMUS for special loading equipmentrequirements.
Existing loading equipment maybe able to be retained, contact
PRIMUS formore information.
1. Units have Split Beams and may be split for shipping purpose.
All other units do not have split beam.2. Shipping dimensions are
measured to the edge of the heat exchanger and include plumbing on,
split beams
removed, where applicable, front stainless steel panel and
printer removed.3. Knockdown is vessel dimension only, dimension
does not include plumbing, electrical or heat exchanger.
Special
Order Only, must be indicated when ordering.
-
Form 2091-1.00/081607 Page 12
SPEC
IFIC
ATIO
N D
ATA
SH
EET LOADING EQUIPMENT (Cont’d)
Transfer Carriage and Loading Cart Dimensions
Transfer Carriage and Loading Cart Dimensions (Cont’d)
EZISREBMAHC EGAIRRACYTQ
TRACYTQ
A B 1C 2C D E F
"93x"63x"62-E 6L-1 4L-1 "52.04 "42 "91.75 "60.14 "00.75 "12
"05.53
"84x"63x"62-F 6L-1 4L-1 "52.84 "42 "44.55 "60.14 "88.36 "12
"60.92
"06x"63x"62-G 6L-1 4L-1 "52.06 "42 "44.55 "60.14 "88.57 "12
"31.14
"84x"63x"23-1.G 6L-1 4L-1 "52.64 "42 "44.55 "60.14 "88.36 72
"00.92
06x"24x"63-H 6L-1 4L-1 "52.85 "42 "83.16 "60.14 "88.87 "13
"00.14
"48x"24x"63-I 6L-1 4l-1 "52.34 "42 "83.16 "60.14 "88.85 "13
"57.32
REBMAHCEZIS
EGAIRRACYTQ
TRACYTQ
G 1H 2H J K 1L 2L 3L
"93x"63x"62-E 6L-1 4L-1 "05.61 "13 "83.23 "5 "42 "43 "73 A/N
"84x"63x"62-F 6L-1 4L-1 "05.61 "05.92 "65.03 "5 "22 "05.34 "64
A/N
"06x"63x"62-G 6L-1 4L-1 "05.61 "05.92 "65.03 "5 "22 "05.55 "85
"72
"84x"63x"23-1.G 6L-1 4L-1 "05.22 "05.92 "03 '5 "82 "05.34 "64
A/N
"06x"24x"63-H 6L-1 4L-1 "05.62 "05.53 "65.63 "5 "23 "05.55 "85
"72
48x"24x"63-I 6L-2 4L-2 "05.62 "05.53 "65.63 "5 "23 "05.73 "04
A/N
-
Form 2091-1.00/081607 Page 13
SPEC
IFIC
ATIO
N D
ATA
SH
EET
PRIMUS has earned a reputation for offeringthe premier
sterilizer on the market!
The PRIMUS Difference:
Quality and Innovation – Dedicated to sterilizers for over 25
years.
Steam Sterilizers are Our Only Business – Proud to be the only
major steam sterilizermanufacturer specializing in Steam
Sterilizers
ASME Certified Pressure Vessel Factory – Being the owner of our
ASME shop ensures highest ofquality and faster deliver times
USA Designed and Manufactured
19 Standard Sizes, Custom Sizes Available
Steam Sterilizer for Every Need – From Basic Sterilization to
Hazardous Waste, to ValidatablePharmaceutical and Bio-Critical
Applications
Engineered the Service Out of Sterilizers – “Making it one of
the easiest in the industry to service”per our Authorized Service
Agents and Customers
Simplicity of Design – less parts to fail
Non-Proprietary Components – Lowers the cost of ownership,
minimizes down time and provides amore efficient meantime
repair
304 Stainless Steel Fully Jacketed Vessel (no laminates) –
reduces heat-up time and loss oftemperature, providing greater
uniformity of chamber temperature
Rectangular Chamber - eliminating wasted space and high utility
cost
Sliding Doors: Inherently safe doors – seal integrity. Not a
burn hazard
PRIMUS Controls with “Evergreen Migration” meaning the hardware
and software is continuallysupported lowering total costs of
ownership – All controls offer multiple options on 4
differentcontrol platforms. Through constant improvements and
development PRIMUS Controls remain aleader in the industry. Simple
to operate, reliable and versatile.
Vacuum, Gravity, Liquid and Test Cycles - Standard on all
Sterilizers
Pri-Mirror® Chamber Finish – Most sanitary in the industry.
Providing a mirror finish of
-
Form 2091-1.00/081607 Page 14
This document and data contained within is intended for the
exclusive use of PRIMUScustomers, including architects or
designers. It shall not be reproduced in whole or in partwithout
permission of PRIMUS Sterilizer Company, LLC. Any authorized
reproductionmust bear the entire page to include Headers and
Footers.
SPEC
IFIC
ATIO
N D
ATA
SH
EET
26”x36”x48” with loadingcart
and transfer carriage
“PRIMUS Sterilizer... ...First In Quality Sterilization
Products”
QUALITY AND INTEGRITY FORM THE FOUNDATION OFPRIMUS STERILIZER
COMPANY
OUR VISION FOR CONTINUAL IMPROVEMENT IS REALIZEDTHROUGH THE
ESTABLISHMENT OF QUALITY OBJECTIVES
ACHIEVED THROUGH TEAMWORK WITH A GOAL OFRETURNING SIGNIFICANT
VALUE TO OUR CUSTOMERS.
PRIMUS Sterilizer Company, LLC • 117 South 25th Street • Omaha,
NE 68131Phone (402) 344-4200 • Fax (402) 344-4242 •
[email protected] • www.primus-sterilizer.com
®
-
Form 2091-1.00/081607 Page 15
SPEC
IFIC
ATIO
N D
ATA
GENERAL CONFIGURATIONSBDA Single DoorBDB Double DoorBDE Door(s)
Manually Operated (Std)BCD Cabinet, 2 sidesBCCL Cabinet, 1 Side
LeftBCCR Cabinet, 1 Side RightBCA Recessed, 1 WallBCB Recessed, 2
WallNPN Left Side Service (Std)BC30 Right Side Service Access &
ControlBC31 Control Panel Opposite Side of ServiceBCF Rear PanelBCG
Hinged Access Panel thru Fascia
STEAM SOURCEBEB1 Boiler, 208/3phBEB2 Boiler, 240/3phBEB3 Boiler,
480/3phBEBC1 Clean Steam, 208/3phBEBC2 Clean Steam, 240/3phBEB3
Clean Steam, 480/3phBSCS1 Pure Steam Double Tube, SanitaryBSCS2
Clean Steam Single TubeBSCS3 Clean Steam Single Tube, SanitaryBEBO
Automatic boiler blow-downBLWC Low Water Cutoff, Manual Reset
PHARMACEUTICAL OPTIONSBP9 Clean Steam to Chamber, Threaded
PipingBP9.1 Clean Steam to Jacket, Threaded PipingBP11 Air-Over
CoolingBC24 Control Cycle on Load Temperature
CONTROLS & RELATED OPTIONSBC1 Pri-Matic Control System,
PSS6BC1.1 Pri-Matic Control System, PSS7
(ControlLogix)BC2 Pri-Matic F0 control F0 accumulated, 4
pointsBC8 SCADA Data File
REBMUNLEDOMSUMIRP YTITNAUQ
EMANTCEJORP
SSERDDATCEJORP
EMANYNAPMOC ENOHP
EMANTCATNOC XAF
LIAMETCATNOC
NOITCESNOITACIFICEPS .ONMETI
.ONGNIWARDNONWOHS .ONMOOR
.ONETOUQSUMIRP
CONTROLS & RELATED OPTIONS (con’t)BC11 Serial Data
OutputBC13 Sterilize Filter CycleBC32 Authorized Operator
AccessBC10 Remote Mount Control PanelBR7 Thermal Printer, Take-up
Reel (Std)BR7 Thermal Printer, 32 Character (Std)BIO-CONTAINMENT
OPTIONSBV6 One BioSeal FlangeBV7 BioSeal Extension PanelsBP10
Compressed Air to GasketBC5 Conax AdapterBC23 Remote Alarm
SignalBV11 Fully Welded BioSeal BoxGENERAL OPTIONSBV3.1 Validation
Port, 1.0” diameterBV8 Seismic RestraintBP4 Electric Vacuum Pump
(Std)BP25 Drain Line Strainer/ValveBDF Automatically Operated
DoorBEAC Air CompressorUTILITY - RELATED OPTIONSBP6 Quench Water to
Drain, on Demand (Std)BE1A Stepping Transformer from 220V to
110VBE1B Stepping Transformer from 480V to 110VBE1C Stepping
Transformer from 480/240-240/
120V, 1 ph, 0.5KVABE2 UPS maintains sterilizer operation for
30
minutes during power outageBE3 GFI Receptacle
(Continue on the next page)
Std = Standard ComponentSS = Stainless SteelCIP =
Clean-in-PlaceN/A = Not Available
PRIMUS Specification Data WorksheetComplete the following by
selecting the options or transferring the options, checked on
precedingpages, required to meet your needs. Tear off and forward
completed worksheet to PRIMUS SalesDepartment, fax 402-344-4251, or
your local PRIMUS Representative. If you do not find an option or
sizelisted to meet your requirement, please contact our Sales
Department for additional information andassistance with a custom
design to meet your specifications.
-
Form 2091-1.00/081607 Page 16
YOUR LOCAL PRIMUS REPRESENTATIVE:
Manufacturer reserves the right to modify materials or
specification without notice.
Specification Data Worksheet (cont’d)S
PEC
IFIC
ATIO
N D
ATA
SH
EET
FOR ADDITIONAL ASSISTANCETo discuss your sterilization design
needs, please contact PRIMUS.
PRIMUS Sterilizer Company, LLC • 117 South 25th Street • Omaha,
NE 68131Phone (402) 344-4200 • Fax (402) 344-4242 •
[email protected] • www.primus-sterilizer.com
®
OTHER PIPING OPTIONSBP1 Heated Air-In, Heat Exchanger SSBP5
Safety Valve Over Rupture DiskBP15 CIP Piping (Std)BP16 Air to
Jacket CoolingBP18 Passivate ChamberBP19 Passivate Chamber and
PipingBP20 Steam Quality Sampler
VESSEL OPTIONSBV1 Stainless Steel FrameBV2 Jacket Type, 316 L
SSBV3 Jacket Insulation Cover, SSBV6.1 Additional BioSeal FlangeBV8
Seismic RestraintsBV10 BioSeal Panels, StainlessGMP DOCUMENTATION
OPTIONSBD1 GMP Validation DocumentationBD2 IQ/OQ Protocol,
PSS500BD3 IQ/OQ Protocol, Pri-Matic
Std = Standard ComponentSS = Stainless SteelCIP =
Clean-in-PlaceN/A = Not Available1 = NEMA 12 (IP55), Dustproof,
Painted Steel Enclosure2 = NEMA 4, Waterproof, Stainless Steel
Enclosure3 = NEMA 4X (IP66), Waterproof, Stainless Steel
Enclosure
OTHER CONTROL OPTIONSBC3 Blind Flange Assembly, Sanitary
FittingBC4 Jacket Pressure Display, DigitalBC5 16/24 Thermocouples
Conax AdapterBC7 Second PanelView 1000BC14 WFI InterfaceBC15
Pri-Matic in NEMA 121 enclosure
(Dustproof)BC15.1 Stainless Steel Enclosure for Pri-Matic
Control PanelBC16 Pri-Matic mounted in NEMA 42 Enclo-
sure (Waterproof)BC16.1 Pri-Matic mounted in NEMA 4X3 SS
EnclosureBC17 Remote Sterilizer “OFF” SignalBC18 Remote
Sterilizer “In-Cycle” SignalBC23 Remote Alarm SignalBC26 PanelView
550, Service AreaBC29 Additional Operational Manuals (2 hard
copies and 1 CD provided) QtyBC30 Modem PLCBC31 Second RTD Load
ProbeBR2 Dot Matrix Printer, 80 columnBR3 Strip-Chart RecorderBR4.1
Thermal Printer, Flush Mount 24 Col.BR5 Circular Chart RecorderBR6
Impact Printer, 24 Column
LOADING EQUIPMENTBL1 Removable Bottom Shelf (Std)BL2 Extendable
Bottom ShelfBL3 Additional Chamber ShelvesBL4 Loading CartBL5
Additional Cart ShelvesBL6 Transfer Carriage
/ColorImageDict > /JPEG2000ColorACSImageDict >
/JPEG2000ColorImageDict > /AntiAliasGrayImages false
/CropGrayImages true /GrayImageMinResolution 300
/GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true
/GrayImageDownsampleType /Bicubic /GrayImageResolution 300
/GrayImageDepth -1 /GrayImageMinDownsampleDepth 2
/GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true
/GrayImageFilter /DCTEncode /AutoFilterGrayImages true
/GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict >
/GrayImageDict > /JPEG2000GrayACSImageDict >
/JPEG2000GrayImageDict > /AntiAliasMonoImages false
/CropMonoImages true /MonoImageMinResolution 1200
/MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true
/MonoImageDownsampleType /Bicubic /MonoImageResolution 1200
/MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000
/EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode
/MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None
] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false
/PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000
0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true
/PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ]
/PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier ()
/PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped
/False
/Description > /Namespace [ (Adobe) (Common) (1.0) ]
/OtherNamespaces [ > /FormElements false /GenerateStructure true
/IncludeBookmarks false /IncludeHyperlinks false
/IncludeInteractive false /IncludeLayers false /IncludeProfiles
true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe)
(CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA
/PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged
/UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false
>> ]>> setdistillerparams> setpagedevice