ESAB Equipment Catalogue 2009 EE607_119052

PPE & Welding AccessoriesPERSONAL PROTECTION

WELDING TOOLS AND ACCESSORIES

SPECIAL PROCESS EQUIPMENT

Global solutions for localcustomers – everywhere.

Find out more on www.esab.com

Part No: XA00142620FMS/104879

Part No: XA00142620

World leader in welding and cuttingtechnology and systems

ESAB operates at the forefront of

welding and cutting technology. Over

one hundred years of continuous

improvement in products and processes

enables us to meet the challenges of

technological advance in every sector

in which ESAB operates.

Quality and environment standards

Quality and the environment are two

key areas of focus. ESAB is one of

few international companies to have

achieved the new ISO 14001 standard

in Environmental Management

Systems across all our global

manufacturing facilities.

At ESAB, quality is an ongoing

process that is at the heart of all our

production processes and facilities

worldwide. Multinational manufacturing,

local representation and an international

network of independent distributors

brings the benefits of ESAB quality

and unrivalled expertise in materials

and processes within reach of all our

customers, wherever they are located.

ESA

B r

eser

ves

the

right

to

alte

r sp

ecifi

catio

ns w

ithou

t pr

ior

notic

e.

The ESABgroup iscertified

according toISO 14001 &

OHSAS 18001

WorldSince 1904, ESAB has been both a pioneer and leader in welding and cuttingdevelopment technology. Today ESAB combines world leadership with globalapplications expertise.

With over 100 years of experience, and a presence in over 80 countries worldwide, ESAB is probably the mostrecognised brand in welding and cutting with a productportfolio, which includes:

Standard Welding and Cutting Equipment

Automatic Equipment

Automated Cutting Equipment

Welding Consumables

Personal Protective Equipment (PPE)

Welding Accessories

By continuously improving and developing our products and manufacturing processes, we meet the challenges of technological advance in every sector and market we operate in. Delivering quality products and services remains at the heart of everything we do across all our global sales and product operations.

leaderin welding and cutting technology and systems

Helmets, Masks and Screens 4-38

Filter & Spatter Lenses 39

Hard Hats & Hearing Protection 40

Respiratory Equipment 41-49

Spectacles, Goggles & Visors 50-53

Welding Curtains 54-55

Welding Blankets 56-57

Welding Clothing and Coveralls 58-60

Head Protection 61

Welding Gloves 62-65

Safety Footwear 66-68

Personal Protection

Cables, Connectors and Electrode Holders 70-73

Clamps 73-75

Anti Spatter 76-77

Chemical Sundries and Indicators 77-78

Chipping Hammers 79-80

Fillet Gauges 80-81

Small Tools 81-83

Cylinder Trolleys 84

Welding Tools & Accessories

Drying Equipment 86-91

Tungsten Grinders 92-94

Tungsten Electrodes 94-95

Gouging Torches and Spares 96-99

Fume Extraction Units 100

Special Process Equipment

ESAB offer a comprehensive range of PersonalProtection Equipment, covering everything fromhead to foot, for both welding and cutting andgeneral engineering applications. All ESABproducts conform to all relevant EU legislation and standards.

As Health and Safety Standards improve year on year, so does ESAB’s commitment to providinga product portfolio capable of meeting the everincreasing demands of the markets we serve. As you would expect from a leading supplier ofwelding and cutting solutions, the ESAB productrange is second to none for quality and reliability.

Contents

Personal Protection

54

Helmets, Masks & Screens Helmets, Masks & Screens

The New-Tech 9-13 offers step less setting of the shade level between DIN 9 and 13. The settings, including sensitivity, are made from theinside of the helmet.

New-Tech 9-13 0700 000 282

New-Tech™ 9-13

The New-Tech series of auto darkening welding helmets features the latest technology. All four models are very lightweight and well balanced. The head gear can be set to fit each individual user for maximumcomfort. The New-Tech helmets offer a wide viewing area, giving the welder a feeling of increased spaceawareness. The helmet shell is designed to give maximum protection to the face but also to the neck and ears. The area in front of the mouth is made larger to ensure a good flow of fresh air and low levels of Carbon Dioxide. The cartridges are powered by solar cells and automatically activated by daylight, sothere is no need to switch on or off. All helmets are CE (EN 349 and EN 175) approved.

New-TechTM FamilyThe New-Tech 6-13 can be used for almost any application. The shadelevel can be adjusted from DIN 6 to DIN 13, making this helmet veryversatile. All settings are made from the outside of the helmet. The helmetfeatures a grinding mode, where the cartridge can be switched off forgrinding, there is also a sensitivity and delay function. The New-Tech 6-13 is equipped with ADC technology which will ensure a solid shade level evenwhen viewing the lens at an angle, i.e. positional welding. The uniquesilver gloss finish on the exterior shell of the New-Tech helps to reflectheat and increases the helmets resistance to high temperatures. This alsohelps to reduce temperature build up within the helmet.

New-Tech 6-13 ADC 0700 000 280

New-Tech™ 6-13 ADC

The New-Tech 9-13 ADC offers the latest ADC-technology which willensure a solid shade level even when viewing the lens at an angle, i.e. positional welding. The settings, such as shade level DIN 9 to 13,sensitivity and delay, are made from the outside of the helmet. The New-Tech 9-13 is suitable for almost all applications, TIG, MIG/MAG,MMA and gas welding/cutting. The unique silver gloss finish on theexterior shell of the New-Tech helps to reflect heat and increases thehelmets resistance to high temperatures. This also helps to reducetemperature build up within the helmet.

New-Tech 9-13 ADC 0700 000 281

New-Tech™ 9-13 ADC

The New-Tech 11 is a single shade helmet. When activated by the arcthe shade goes to DIN 11. This helmet is suitable for maintenance andrepair work where mainly MMA and/or MIG/MAG welding is used.

New-Tech 11 helmet 0700 000 283

New-Tech™ 11

The New-Tech welding helmets are extremelyversatile, and can be used in combination withESAB respiratory equipment, hard hats & internalgrinding visors.

New-Tech prepared for fresh air unitsNew-Tech combined with hard hatNew-Tech with internal visor prepared for fresh airNew-Tech with hard hat prepared for fresh air

See pages 8-9 for further information.

76


1 Helmet Shell Silver New-Tech 6-13 / 9-13 ADC 0700 000 2102 Cartridge New-Tech 6-13 ADC 0700 000 2003 Adjustment knob kit 0700 000 2234 Front Cover Lens New-Tech 0700 000 2274 Front Cover Lens CR39 New-Tech 0701 416 3545 Supporting Frame New-Tech 0700 000 2206 Metal Locking Spring New-Tech 0700 000 2217 Inside Cover Lens New-Tech 0700 000 2288 Sweat Band New-Tech 0700 000 2269 Headgear Complete New-Tech 0700 000 222* Fresh Air mounting kit for New-Tech 0700 002 047

* Not shown

Spares for New-Tech™ 6-13 ADC (Fig 1)

Spares for New-Tech™ 6-13 / 9-13 ADC Fig 1

1 Helmet Shell Silver New-Tech 9-13 / 6-13 ADC 0700 000 2102 Cartridge New-Tech 9-13 ADC 0700 000 2013 Adjustment knob kit 0700 000 2234 Front Cover Lens New-Tech 0700 000 2274 Front Cover Lens CR39 New-Tech 0701 416 3545 Supporting Frame New-Tech 0700 000 2206 Metal Locking Spring New-Tech 0700 000 2217 Inner Cover Lens New-Tech 0700 000 2288 Sweat Band New-Tech 0700 000 2269 Headgear Complete New-Tech 0700 000 222* Fresh Air mounting kit for New-Tech 0700 002 047

* Not shown

Spares for New-Tech™ 9-13 ADC (Fig 1)

1

2

4

5

67

9

8

3

1 Helmet Shell Black New-Tech 9-13 / 11 0700 000 2122 Cartridge for New-Tech 9-13 0700 000 2023 Front Cover Lens New-Tech 0700 000 2273 Front Cover Lens CR39 New-Tech 0701 416 3544 Supporting Frame New-Tech 0700 000 2205 Metal Locking Spring New-Tech 0700 000 2216 Inside Cover Lens New-Tech 0700 000 2287 Sweat Band New-Tech 0700 000 2268 Headgear Complete New-Tech 0700 000 222* Fresh Air mounting kit for New-Tech 0700 002 047

* Not shown

Spares for New-Tech™ 9-13 (Fig 2)

Spares for New-Tech™ 9-13 / 11 Fig 2

1

2

3

4

56

8

7

1 Helmet Shell Black New-Tech 11 / 9-13 0700 000 2122 Cartridge New-Tech 11 0700 000 2033 Front Cover Lens New-Tech 0700 000 2273 Front Cover Lens CR39 New-Tech 0701 416 3544 Supporting Frame New-Tech 0700 000 2205 Metal Locking Spring New-Tech 0700 000 2216 Inside Cover Lens New-Tech 0700 000 2287 Sweat Band New-Tech 0700 000 2268 Headgear Complete New-Tech 0700 000 222* Fresh Air mounting kit for New-Tech 0700 002 047

* Not shown

Spares for New-Tech™ 11 (Fig 2)

98

Hearing protection with neck support is available for the New-Tech. SNR rating = 26 dB.

Hearing protection with neck support 0700 001 880

New-Tech™ Hearing Protection

All New-Tech welding helmets can be used in combination with Air 160,Air 200 and compressed air units. The helmets are delivered fullyassembled, incl. flame resistant head and face seal and air duct. Followthree simple steps to make up your combination: 1. Select the New-Techhelmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require.

New-Tech 6-13 ADC prepared for fresh air 0700 000 284New-Tech 9-13 ADC prepared for fresh air 0700 000 285New-Tech 9-13 prepared for fresh air 0700 000 286New-Tech 11 prepared for fresh air 0700 000 287

New-Tech™ Helmets with Fresh air

All New-Tech welding helmets can be used in combination with a hard hat,Air 160, Air 200 and compressed air units. The helmets are delivered fullyassembled, incl. hard hat with internal air duct and flame resistant headand face seal. Follow three simple steps to make up your combination:1. Select the New-Tech helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require.

New-Tech 6-13 ADC prepared for Fresh air + hard hat 0700 000 292New-Tech 9-13 ADC prepared for Fresh air + hard hat 0700 000 293 New-Tech 9-13 prepared for Fresh air + hard hat 0700 000 294New-Tech 11 prepared for Fresh air + hard hat 0700 000 295

New-Tech™ Helmets with Hard Hat & Fresh Air

The New-Tech with internal visor is delivered with an air fed grade Bimpact protection grinding visor complete with a face and head seal. The grinding visor can be fitted in any of the standard New-Tech helmetsand can be combined with either the Air 160, Air 200 or compressed airrespiratory systems. This would be the ideal system for all applicationsinvolved in welding fabrication. One head system for welding and grinding.Follow three simple steps to make up your combination: 1. Select theNew-Tech helmet package that you require. 2. Select the hose kit yourequire. 3. Select the air unit your require.

New-Tech 6-13 ADC with Internal visor 0700 000 288New-Tech 9-13 ADC with Internal visor 0700 000 289New-Tech 9-13 with Internal visor 0700 000 290New-Tech 11 with Internal visor 0700 000 291

New-Tech™ with Internal Visor

By removing the head harness and replacing it with a hard hat adapter(0700 000 230) the New-Tech can be fitted on to ESAB’s protective helmet. The combination is very well balanced and comfortable to wear.The New-Tech helmet can be detached and reattached in a second. The specially designed hard hat meets the highest standards and it’sequipped with ratchet adjustment. 1. Select the New-Tech helmet. 2. Select the hard hat adapter. 3. Select the hard hat.

New-Tech 6-13 ADC 0700 000 280New-Tech 9-13 ADC 0700 000 281New-Tech 9-13 0700 000 282New-Tech 11 0700 000 283Hard hat adapter for New-Tech 0700 000 230Hard hat Yellow 0700 000 052Hard hat White 0700 000 135Hard hat Blue 0700 000 136Hard hat Green 0700 000 137Hard hat Red 0700 000 138

New-Tech™ with Hard Hat

The New-Tech can be equipped with a magnifying lens. The magnifyinglens is fitted from the inside (so no adapter is needed). There are fourdifferent diopters available, +1,0 / +1,5 / +2,0 / +2,5.

Diopter +1,0 New-Tech 0700 000 084Diopter +1,5 New-Tech 0700 000 085Diopter +2,0 New-Tech 0700 000 086Diopter +2,5 New-Tech 0700 000 087

New-Tech™ Magnifying Lenses

Accessories for New-Tech™


New-Tech™ Combinations

Head Seal for internal visor 0700 002 051Face Seal for internal visor 0700 002 052Spare Visor for internal visor 0700 002 053Tear off visor for internal visor 0700 002 054Head Seal for hard hat 0700 000 093Face Seal for hard hat 0700 000 094Hard Hat with internal air duct 0700 000 097

Spares for New-Tech™ Combinations

1110


The entry level helmet in the Eye-Tech II range is the 10/11, a two shadehelmet designed for MIG/MAG and MMA welding.

Eye-Tech II 10/11 0700 000 910

Eye-Tech™ II 10/11

The Eye-Tech™ II family consists of four helmets that represent a professional range within the weldinghelmets. The helmet is extremely strong and robust and is ideally suited for heavy duty weldingapplications. The helmet shell is extremely tolerable to high temperatures, whilst the extended spacebetween the front cover lens and the ADF allows the air to cool, which offers extended working time inhigh temperature situations. The cartridges are powered by solar cells with battery back up, and are both water proof and shock resistant. All Eye-Tech™ II are CE (EN379 and EN175), CSA, ANSI, AS/NZAand DIN approved.

Eye-TechTM II FamilyThe Eye-Tech II 5-13 is suitable for almost all applications, MIG, MMA,and TIG welding, even on very low amperage arc welding, grinding, gaswelding and plasma cutting. All adjustments, such as the shade setting,the sensitivity and the delay, are controlled on the satellite, found on theoutside of the helmet shell. The grinding mode (DIN 4) can be easilyactivated from the outside.

Eye-Tech II 5-13 0700 000 907

Eye-Tech™ II 5-13

By setting the manual/auto switch to auto, the helmet will detect theintensity from the welding arc and set the shade accordingly. It is alsopossible to fine-tune the selected shade using the potentiometer.Alternatively, you can set the switch to manual and set the shade levelyourself. As all the controls on the Eye-Tech II, 9-13 are on the outside of the helmet, you do not have to take the helmet off to set the sensitivity or the delay.

Eye-Tech II 9-13 0700 000 908

Eye-Tech™ II 9-13

The 10-12 is an excellent helmet for people working in repair andmaintenance as it provides shade cover for MMA and MIG welding atbetween 100-300 amps. The helmet can also be used for TIG welding at between 70-300 amps. The shade setting potentiometer has been put on the outside of the helmet from where it can be set even with agloved hand.

Eye-Tech II 10-12 0700 000 909

Eye-Tech™ II 10-12

The Eye-Tech II welding helmets are extremelyversatile, and can be used in combination withESAB respiratory equipment, hard hats & internalgrinding visors.

Eye-Tech II prepared for fresh air unitsEye-Tech II combined with hard hatEye-Tech II with internal visor prepared for fresh airEye-Tech II with hard hat prepared for fresh air

See pages 14-15 for further information.

1312


1 Front cover lens Eye-Tech II 0700 000 0592 Clip set for Eye-Tech II 5-13 0700 000 0773 Eye-Tech II 5-13 without cartridge 0700 000 0544 Excenter knob 0700 000 0095 Inside cover lens Eye-Tech II 0700 000 0616 Satellite fixing frame 0700 000 0567 Sweat Band 0700 000 0058 Headgear 0700 000 0039 Cartridge Eye-Tech II 5-13 0700 000 05510 Potentiometer knob 0700 000 03711 Sensitivity adjustment 0700 000 038* Fresh Air mounting kit for Eye-Tech II 0700 002 047

* Not shown

Spares for Eye-Tech™ II 5-13 (Fig 3)

Spares for Eye-Tech™ II 5-13 / 9-13 Fig 3

1 Front cover lens Eye-Tech II 0700 000 0592 Clip set yellow 0700 000 0793 Eye-Tech II 9-13 without cartridge 0700 000 0644 Excenter knob 0700 000 0095 Inside cover lens Eye-Tech II 0700 000 0616 Satellite fixing frame 0700 000 0567 Sweat Band 0700 000 0058 Headgear 0700 000 0039 Cartridge Eye-Tech II 9-13 0700 000 06510 Potentiometer knob Eye-Tech II 9-13 0700 000 06711 Sensitivity adjustment 0700 000 038* Fresh Air mounting kit for Eye-Tech II 0700 002 047

* Not shown


1 Front cover lens Eye-Tech II 0700 000 0592 Clip set yellow 0700 000 0793 Eye-Tech II 10-12 without cartridge 0700 000 0684 Excenter knob 0700 000 0095 Inside cover lens Eye-Tech II 0700 000 0616 Satellite fixing frame 0700 000 0567 Sweat Band 0700 000 0058 Head Band 0700 000 0039 Cartridge Eye-Tech II 10-12 0700 000 06910 Sensor bar Eye-Tech II 0700 000 07011 Potentiometer knob Eye-Tech II 0700 000 071* Fresh Air mounting kit for Eye-Tech II 0700 002 047

* Not shown


Spares for Eye-Tech™ II 10-12 / 10-11 Fig 4

1 Front cover lens Eye-Tech II 0700 000 0592 Clip set yellow 0700 000 0793 Eye-Tech II 10-11 without cartridge 0700 000 0724 Excenter knob 0700 000 0095 Inside cover lens Eye-Tech II 0700 000 0616 Satellite fixing frame 0700 000 0567 Sweat Band 0700 000 0058 Head Band 0700 000 0039 Cartridge Eye-Tech II 10-11 0700 000 07310 Sensor bar Eye-Tech II 0700 000 070* Fresh Air mounting kit for Eye-Tech II 0700 002 047

* Not shown


Applicable only to the

Eye-Tech II 10-12.

11

2

3

4 5

6

7

8

10

119

2

3

4 5

6

7

8

1011

9

1514

Hearing protection with neck support is available for the Eye-Tech II. SNR rating = 26 dB.


Eye-Tech™ II Hearing Protection

All Eye-Tech II helmets can be used in combination with the Air 160, Air 200 and compressed air units. The helmets are delivered fully assembledand, include flame resistant head and face seal and air duct. Follow thethree simple steps to make up your combination. 1. Select the Eye-TechII helmet package you require. 2. Select the hose kit you require. 3. Select the air unit you require.

Eye-Tech II 5-13 prepared for fresh air 0700 002 969Eye-Tech II 9-13 prepared for fresh air 0700 002 970Eye-Tech II 10/12 prepared for fresh air 0700 002 971Eye-Tech II 10/11 prepared for fresh air 0700 002 972

Eye-Tech II Helmets with Fresh Air

By removing the head harness and replacing it with a hard hat adapter the Eye-Tech II can be fitted on to ESAB’s protective helmet.The combination is very well balanced and comfortable to wear. The Eye-Tech II helmet can be detached and reattached in a second. The specially designed hard hat meets the highest standard and it is equipped with ratchet adjustment. 1. Select the Eye-Tech IIhelmet. 2. Select the hard hat adapter. 3. Select the hard hat.

Eye-Tech II 5-13 0700 000 907Eye-Tech II 9-13 0700 000 908Eye-Tech II 10-12 0700 000 909Eye-Tech II 10-11 0700 000 910Hard hat adapter Eye-Tech 0700 000 043Hard hat Eye-Tech Yellow 0700 000 052Hard hat Concept White 0700 000 135Hard hat Concept Blue 0700 000 136Hard hat Concept Green 0700 000 137Hard hat Concept Red 0700 000 138

Eye-Tech™ II with Hard Hat

For environments where both head and respiratory protection arerequired the Eye-Tech II with hard hat and air supply is the ideal solution.The system consists of an Eye-Tech II helmet and a high quality hard hat with internal air duct.The system can be connected to either the Air 160/200 or breathable compressed air using the standard Eye-Techair hose (0468 127 011).1. Select the Eye-Tech II helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require.

Eye-Tech II 5-13 with hard hat prepared for air 0700 000 920Eye-Tech II 9-13 with hard hat prepared for air 0700 000 921Eye-Tech II 10-12 with hard hat prepared for air 0700 000 922Eye-Tech II 10-11 with hard hat prepared for air 0700 000 923

Eye-Tech™ II with Hard Hat and Air Supply

The Eye-Tech II can be used with an air fed grade B impact protectiongrinding visor complete with a face and head seal. The grinding visorcan be fitted to any of the standard Eye-Tech II helmets and can becombined with either the Air 160, Air 200 or breathable compressed airrespiratory systems. This would be the ideal system for all applicationsinvolved in welding fabrication. One head system for welding and grinding. 1. Select the Eye-Tech II package that you require. 2. Select the hose kityou require. 3. Select the air unit your require.

Eye-Tech II 5-13 with internal visor 0700 000 916Eye-Tech II 9-13 with internal visor 0700 000 917Eye-Tech II 10-12 with internal visor 0700 000 918Eye-Tech II 10-11 with internal visor 0700 000 919

Eye-Tech™ II with Internal Visor

The Eye-Tech II can be equipped with a magnifying lens. The magnifyinglens is fitted from the inside (so no adapter is needed). There are fourdifferent diopters available, +1,0 / +1,5 / +2,0 / +2,5.

Diopter +1,0 Eye-Tech II 0700 000 084Diopter +1,5 Eye-Tech II 0700 000 085Diopter +2,0 Eye-Tech II 0700 000 086Diopter +2,5 Eye-Tech II 0700 000 087

Eye-Tech™ II Magnifying Lenses

Head Seal for internal visor 0700 002 051Face Seal for internal visor 0700 002 052Spare Visor for internal visor 0700 002 053Tear off visor for internal visor 0700 002 054

Head Seal for hard hat 0700 000 093Face Seal for hard hat 0700 000 094Hard Hat with internal air duct 0700 000 097

Accessories for Eye-Tech™ II

Spares for Eye-Tech™ II Combinations


Eye-Tech™ II Combinations

1716

The ESAB Eye-Tech 10/11 has a switch on the inside of the helmet thatgives you a fixed shade level of 10 or 11 during welding.

Eye-Tech 10/11 0700 000 888

Eye-Tech™ 10/11

The ESAB Eye-Tech 5-13 offers unlimited personal settings. The latest LCD technology enables you to adjust the shade between DIN 5-9and/or DIN 9-13. The ‘grinding mode’ (DIN 4) can easily be activatedfrom the outside. The Eye-Tech 5-13 can be used in all weldingapplications including oxy/fuel gas welding.

Eye-Tech 5-13 0700 000 890

Eye-Tech™ 5-13

The ESAB Eye-Tech 9-13 is equipped with step-less shade setting ofbetween 9 and 13 and it can be adjusted from the outside during welding.

Eye-Tech 9-13 0700 000 880

Eye-Tech™ 9-13

The ESAB Eye-Tech 10-12 has a switch on the inside of the helmet foreasy adjustment between shade areas 10-11 and 11-12.

Eye-Tech 10-12 0700 000 884

Eye-Tech™ 10-12


Eye-Tech™ Family

The Eye-Tech™ family consists of four helmets that represent a professional range within welding helmets. The Eye-Tech™ original helmets have proven to be one of the most reliable helmets in theirclass, since they were launched over fifteen years ago. The Eye-Tech helmets still remains a popularchoice amongst the ordinary common welder. They have cartridges powered by solar cells with batteryback up, and are both water proof and shock resistant. All Eye-Tech™ are CE (EN379 and EN175), CSA, ANSI, AS/NZA and DIN approved.

The Eye-Tech welding helmets are extremely versatile,and can be used in combination with ESAB respiratoryequipment and hard hats.

Eye-Tech prepared for fresh air unitsEye-Tech combined with hard hat

See page 20 for further information.

1918

1 Helmet shell Eye-Tech 5-13 0700 000 0342 Cartridge 5-13 0700 000 0353 Front cover lens 0700 000 0104 Front cover lens holder 0700 000 0066 Potentiometer knob 0700 000 0377 Sensitivity knob 0700 000 0388 Satellite cover plate 0700 000 0399 Headgear 0700 000 00310 Sweatband 0700 000 005* Inside cover lens 0700 000 011* Fresh air mounting kit for Eye-Tech 0700 002 030

* Not shown

Spares for Eye-Tech 5-13 (Fig 5)

1 Helmet shell Eye-Tech 10/11 0700 000 0023 Front cover lens holder 0700 000 0064 Front cover lens 0700 000 0105 Inside cover lens 0700 000 0116 Excenter knob 0700 000 0099 Cartridge 10/11 0700 000 02810 Sensor bar 0700 000 008* Headgear 0700 000 003* Sweatband 0700 000 005* Fresh air mounting kit for Eye-Tech 0700 002 030

* Not shown

Spares for Eye-Tech 10/11

Spares for Eye-Tech 5-13 Fig 5

1 Helmet shell Eye-Tech 9-13 0700 000 0023 Front cover lens holder 0700 000 0064 Front cover lens 0700 000 0105 Inside cover lens 0700 000 0116 Excenter knob 0700 000 0099 Potentiometer knob 0700 000 00710 Sensor bar 0700 000 00811 Cartridge 9-13 0700 000 001* Headgear 0700 000 003* Sweatband 0700 000 005* Fresh air mounting kit for Eye-Tech 0700 002 030

* Not shown

Spares for Eye-Tech 9-13 (Fig 6) Spares for Eye-Tech 10-12 (Fig 7)

Spares for Eye-Tech 9-13 Fig 6 Spares for Eye-Tech 10-12 / 10/11 Fig 7

1 Helmet shell Eye-Tech 10-12 0700 000 0023 Front cover lens holder 0700 000 0064 Front cover lens 0700 000 0105 Inside cover lens 0700 000 0116 Excenter knob 0700 000 0099 Cartridge 10-12 0700 000 02210 Sensor bar 0700 000 008* Headgear 0700 000 003* Sweatband 0700 000 005* Fresh air mounting kit for Eye-Tech 0700 002 030

* Not shown


2120

Accessories for Eye-Tech™

By removing the head harness and replacing it with a hard hat adapter theEye-Tech can be fitted on to ESAB’s protective helmet. The combinationis very well balanced and comfortable to wear. The Eye-Tech helmet canbe detached and reattached in a second. The specially designed hardhat meets the highest standard and it’s equipped with ratchet adjustment.1. Select the Eye-Tech helmet package you require.2. Select the hard hat adapter you require.3. Select the hard hat you require.

Eye-Tech 5-13 0700 000 890Eye-Tech 9-13 0700 000 880Eye-Tech 10-12 0700 000 884Eye-Tech 10/11 0700 000 888Hard hat adapter Eye-Tech 0700 000 043Hard hat Eye-Tech Yellow 0700 000 052Hard hat Concept White 0700 000 135Hard hat Concept Blue 0700 000 136Hard hat Concept Green 0700 000 137Hard hat Concept Red 0700 000 138

Eye-Tech™ with Hard Hat

The Eye-Tech can be equipped a magnifying lens. The magnifying lens is fitted from the inside, using with adapter (0700 000 030). There arefour different diopters available, +1.0 / +1.5 / +2.0 / +2.5.

Diopter +1.0 Eye-Tech 0367 951 001Diopter +1.5 Eye-Tech 0367 951 002Diopter +2.0 Eye-Tech 0367 951 003Diopter +2.5 Eye-Tech 0367 951 004Adapter for diopter 0700 000 030

Eye-Tech™ Magnifying Lenses

Hearing protection with neck support is available for the Eye-Tech. SNR rating = 26 dB.


Eye-Tech™ Hearing Protection

All Eye-Tech helmets can be used in combination with ESAB Air 160, Air200 and CA respiratory units. The helmets are delivered fully assembledand, incl. Flame resistant head and face seal and air duct. Follow thethree simple steps to make up your combination.1. Select the Eye-Tech helmet package you require.2. Select the hose kit you require.3. Select the air unit you require.

Eye-Tech 5-13 prepared for fresh air 0700 002 922Eye-Tech 9-13 prepared for fresh air 0700 002 923Eye-Tech 10/12 prepared for fresh air 0700 002 924Eye-Tech 10/11 prepared for fresh air 0700 002 925

Eye-Tech™ with Fresh Air


Eye-Tech™ Combinations

2322

Helmets, Masks & Screens

The Origo™-Tech 9-13 features an external shade adjustment betweenDIN 9 and DIN 13. The delay and sensitivity can be adjusted from theinside. The Origo™-Tech 9-13 is suitable for MIG/MAG, MMA and TIG(over 20 amps).

Origo™-Tech ‘Black’ 0700 000 296

Origo™-Tech 9-13 ‘Black’

The Origo™-Tech 9-13 features an external shade adjustment betweenDIN 9 and DIN 13. The delay and sensitivity can be adjusted from theinside. The Origo™-Tech 9-13 is suitable for MIG/MAG, MMA and TIG(over 20 amps).

Origo™-Tech ‘Yellow’ 0700 000 298

Origo™-Tech 9-13 ‘Yellow’

The Origo Air is a battery powered respiratory unit designed to fit theOrigo-Tech welding helmets. The unit provides clean, filtered air toincrease the comfort and safety for the welder. The Origo Air is deliveredcomplete with an 8-hour battery, P3 filter, comfort pad, waist belt and anair hose with a Proban hose cover fitted. The unit is supplied with anintelligent charger, which will ensure a prolonged life time of the battery, byreducing the risk of over charging. The Origo Air is also equipped with alow flow alarm, which will give an audible signal when the filter is blocked,or the battery power is running low. The complete system is comfortable,lightweight and durable.

Origo Air Complete (EU and UK) 0700 002 100Origo Tech 9-13 Black prepared for air 0700 000 300Origo Tech 9-13 Yellow prepared for air 0700 000 301

Origo™ Air

Origo™-Tech 9-13


The new stylish high-tech helmet designfrom ESAB. The new shell is available in 2 striking high gloss colours, ‘Yellow’ or‘Black’. The helmet features the ESABcomfort headgear, whilst the light weightshell offers superior face, head, ear & neckprotection, which allows for welding in allpositions. The ESAB variable shade ADF uses the latest technology and has provenreliability. The ADF is screw retained and sits in a fully moulded light seal cradle, whichalso creates a slight convex curve on thefront spatter lens for extra security andstrength. The Helmet is delivered in an ESAB display box, fully assembled and ready to use.

1 ESAB Head Gear Pro 0700 000 2432 Sweat Band Head Gear Pro 0700 000 2443 Front Cover Lens Origo™-Tech 0700 000 2454 Inside Cover Lens Origo™-Tech 0700 000 2465 ESAB 9-13 ADF Cradle 0700 000 2356 Lens Retainer with Screws 0700 000 237

Spares for Origo™-Tech 9-13 (Fig 8)

Spares for Origo™-Tech 9-13 Fig 8

6

5

4

3

2

1

Available fromJuly 2009


2524

The Albatross 3000X is a combination of a welding helmet and agrinding visor. The large panoramic window gives an excellent overviewand good protection whilst grinding. The welding visor can be suppliedin different window sizes. Welding glass 10 DIN included.

Albatross 3000X standard 0700 000 931Albatross 3000X for fresh air 0700 000 932Albatross 3000X for hard hat 0700 000 933Albatross 3000X for hard hat and fresh air 0700 000 934

Albatross 3000X

The Albatross 3000X 9-13 Automatic is a combined ADF helmet and agrinding visor. The ADF is fitted in a flip up front which opens to apanoramic grinding visor (grade B impact resistance) when lifted. The ADF offers a shade setting between DIN 9 and DIN 13.

Albatross 3000X 9-13 Automatic Standard 0700 000 944Albatross 3000X 9-13 Automatic prepared for fresh air 0700 000 945

Albatross 3000X 9-13 Automatic

The ESAB Albatross 1000 has a ‘flip up’ front in to which a welding glassis fitted. There is also a protective plastic lens that gives facial protectionwhen the front is folded up. The Albatross Toughweld welding helmet ismade of heat resistant polyester (up to 240 degrees Celcius), suitable forheavy duty welding. Welding glass 10 DIN included in all helmets.

Albatross 1000 60 x 110 standard 0000 595 200Albatross 1000 60 x 110 for hard hat 0000 595 205(Peltor adapter 0368 975 883)Albatross 1000 60 x 110 for hard hat 0000 595 201(FH aluminium adapter 0000 595 204)Albatross 1000 60 x 110 for fresh air 0000 595 202Albatross 1000 60 x 110 for hard hat & fresh air 0000 595 203Albatross Toughweld, 60 x 110 standard 0700 000 896Albatross Toughweld, 60 x 110 fresh air 0700 000 898Albatross 1000, 90 x 110 standard 0349 502 204Albatross 1000, 90 x 110 for hard hat 0349 502 205Albatross 1000, 90 x 110 for fresh air 0349 502 206Albatross 1000, 90 x 110 for hard hat & fresh air 0349 502 207

Albatross 1000, 60 x 110 and 90 x 110

The inner protective lens on the Albatross 2000 has a shade 2. Thespecially designed ‘flip up’ front is equipped with a 60 x 110mm weldingglass, however it is also possible to view the starting point of the weldthrough the viewing area. When the arc is struck the user can, by tiltingthe head, continue to see through the welding lens, which is beneficialwhen precision starting is essential. Welding glass DIN 9 included.

Albatross 2000 standard 0000 595 600Albatross 2000 for hard hat 0000 595 601Albatross 2000 for fresh air 0000 595 602Albatross 2000 for hard hat and fresh air 0000 595 603

Albatross 2000


Albatross Family

The Albatross series is a range of passive and automatic flip up welding helmets. All the helmets provide a complete and flexible system, which can be fitted with hard hats, hearing protectors and fresh air units.The shell is made from extremely light and durable material, offering increased comfort to the wearer overlong periods of time, whilst the headgear is comfortable easy to adjust. The helmets are delivered fullyassembled (and are ready to use) including chin protection. CE approved.

Albatross 1000, incl Air 160 8h 60 x 110 0700 002 941Albatross 1000, incl Air CA 60 x 110 0349 501 880Albatross 1000, incl hard hat 60 x 110 0349 501 889Albatross 1000, incl hard hat, hearing protectors 60 x 110 0349 501 888Albatross 1000, incl hard hat, Air 160 8h 60 x 110 0700 002 946Albatross 1000, incl hard hat, Air 160 8h, hearing protectors 60 x 110 0700 002 945Albatross 1000, incl hard hat, Air CA 60 x 110 0349 501 891Albatross 1000, incl hard hat, Air CA, hearing protectors 60 x 110 0349 501 890

Albatross 1000, incl Air 160 8h 90 x 110 0700 002 942Albatross 1000, incl Air CA 90 x 110 0349 501 882Albatross 1000, incl hard hat 90 x 110 0349 501 895Albatross 1000, incl hard hat, hearing protectors 90 x 110 0349 501 894Albatross 1000, incl hard hat, Air 160 8h 90 x 110 0700 002 948Albatross 1000, incl hard hat, Air 160 8h, hearing protectors 90 x 110 0700 002 947Albatross 1000, incl hard hat, Air CA 90 x 110 0349 501 897Albatross 1000, incl hard hat, Air CA, hearing protectors 90 x 110 0349 501 896

Albatross 2000, incl Air 160 8h 0700 002 943Albatross 2000, incl Air CA 0349 501 884Albatross 2000, incl hard hat 0349 501 901Albatross 2000, incl hard hat, hearing protectors 0349 501 900Albatross 2000, incl hard hat, Air 160 8h 0700 002 950Albatross 2000, incl hard hat, Air 160 8h, hearing protectors 0700 002 949Albatross 2000, incl hard hat, Air CA 0349 501 903Albatross 2000, incl hard hat, Air CA, hearing protectors 0349 501 902

Albatross 3000X, incl Air 160 8h 0700 002 944Albatross 3000X, incl Air CA 0349 501 886Albatross 3000X, incl hard hat 0349 501 907Albatross 3000X, incl hard hat, hearing protectors 0349 501 906Albatross 3000X, incl hard hat, Air 160 8h 0700 002 952Albatross 3000X, incl hard hat, Air 160 8h, hearing protectors 0700 002 951Albatross 3000X, incl hard hat, Air CA 0349 501 909Albatross 3000X, incl hard hat, Air CA, hearing protectors 0349 501 908

Albatross Combinations

2726


1 Flip-up frame 60 x 110 0000 595 1521 Flip-up frame 90 x 110 0349 501 0842 Plastic cover lens 60 x 110 0160 307 0012 Plastic cover lens 90 x 110 0160 307 0043 Spring 60 x 110 0000 595 1533 Spring 90 x 110 0000 595 3834 Head gear 0000 500 5195 Spare parts for head gear 0000 500 5206 Air hose including adapter 0000 595 2397 Adapter 0349 501 0858 Air tight seal 0000 595 2169 Face seal including bib 0000 595 17810 Welding lens DIN 10, 60 x 110 0160 292 00210 Welding lens DIN 10, 90 x 110 0760 031 632* Sweatband 0369 768 001

* Not shown

Spares for Albatross 1000 Standard and Fresh Air (Fig 8)

Spares for Albatross 1000 Fig 8

1 Flip-up frame 60 x 110 0000 595 1521 Flip-up frame 90 x 110 0349 501 0842 Plastic cover lens 60 x 110 0160 307 0012 Plastic cover lens 90 x 110 0160 307 0043 Spring 60 x 110 0000 595 1533 Spring 90 x 110 0000 595 3834 Air hose including adapter 0000 595 2395 Adapter 0349 501 0856 Air tight seal 0000 595 2167 Face seal including bib 0000 595 1788 Welding lens DIN 10, 60 x 110 0160 292 0028 Welding lens DIN 10, 90 x 110 0760 031 6329 Helmet adapter 0368 975 883* Sweatband 0369 768 001

* Not shown

Spares for Albatross 1000 for Hard Hat and Fresh Air (Fig 9)


2928


1 Flip-up frame 60 x 110 0000 595 3842 Protective lens DIN 2 0160 307 0053 Plastic cover lens 60 x 110 0160 307 0014 Spring 90 x 110 0000 595 3835 Spring 60 x 110 0000 595 1536 Head gear 0000 500 5197 Spare parts for head gear 0000 500 5208 Air hose including adapter 0000 595 2399 Adapter 0349 501 08510 Air tight seal 0000 595 21611 Face seal including bib 0000 595 17812 Welding lens DIN 10 0160 292 002* Sweatband 0369 768 001

* Not shown

Spares for Albatross 2000 Standard and Fresh Air (Fig 10)


1 Flip-up frame 60 x 110 0000 595 3842 Protective lens DIN 2 0160 307 0053 Plastic cover lens 60 x 110 0160 307 0014 Spring 90 x 110 0000 595 3835 Spring 60 x 110 0000 595 1536 Air hose including adapter 0000 595 2397 Adapter 0349 501 0858 Air tight seal 0000 595 2169 Face seal including bib 0000 595 17810 Welding lens DIN 10 0160 292 00211 Helmet adapter 0368 975 883* Sweatband 0369 768 001

* Not shown

Spares for Albatross 2000 for Hard Hat and Fresh Air (Fig 11)


3130


1 Visor 90 x 110 0700 000 1012 Plastic Cover Lens 90 x 110 0160 307 0043 Spring 90 x 110 0000 595 3834 Big Lens Albatross 3000X 0700 000 1025 Head Gear 0000 500 5196 Spare parts for Head gear 0000 500 5207 Air Hose Including Adapter 0000 595 239 8 Adapter 0349 501 0859 Air Tight Seal 0000 595 21610 Face Seal including Bib 0000 595 17811 Welding Lens DIN 10 0760 031 63212 Hinge set for Visor 0700 000 048

Spares for Albatross 3000X Standard and Fresh Air (Fig 12)

Spares for Albatross 3000X Fig 12


1 Visor 90 x 110 0700 000 1012 Plastic Cover Lens 90 x 110 0160 307 0043 Spring 90 x 110 0000 595 3834 Big Lens Albatross 3000X 0700 000 1025 Air Hose including adapter 0000 595 2396 Adapter 0349 501 0857 Air Tight Seal 0000 595 2168 Face Seal including Bib 0000 595 1789 Welding Lens DIN 10 0760 031 63210 Helmet adapter 0368 975 88311 Hinge set for Visor 0700 000 048

Spares for Albatross 3000X for Hard Hat and Fresh Air (Fig 13)

Spares for Albatross 3000X Fig 13

3332


The Globe-Arc is a unique design in flip front welding and grindinghelmets. The visor provides effective protection from UV and IR radiationwhen the visor is both open and closed, and is available in differentshade levels. The helmet is equipped with a strong and comfortablehead gear.

Globe-Arc Shade 10 0700 000 947Globe-Arc Shade 11 0700 000 943

Globe-ArcGlobe-Arc

The Globe-Arc helmet has been designed to provide the ideal protection for all kinds of metal working. The inner lens in combination with the outer lens provide full protection against IR, UV and visible light making it suitable for welding. The inner lenses are available in a number of different shades; DIN 2, DIN 3 and DIN 5. The helmet can therefore also be used for grinding, gas cutting, gas welding and plasma cutting.


1 Hinge Set 0700 000 2672 Large Inner Visor Globe-Arc DIN 2 0700 000 2392 Large Inner Visor Globe-Arc DIN 3 0700 000 2402 Large Inner Visor Globe-Arc DIN 5 0700 000 2413 Outer Flip Visor Globe-Arc DIN 5 0700 000 2423 Outer Flip Visor Globe-Arc DIN 8 0700 000 2473 Outer Flip Visor Globe-Arc DIN 10 0700 000 2484 Flip Up Globe-Arc Holder 0700 000 2495 Headgear Globe-Arc 0700 000 2436 Sweat Band 0700 000 244

Spares for Globe-Arc (Fig 14)

Spares for Globe-Arc Fig 14

4

32

56

1

Available fromMay 2009

Available fromMay 2009

3534


Eco-Arc 60 x 110 un-assembled - 20 pcs* 0700 000 938Eco-Arc 60 x 110 individually packed 0700 000 950Eco-Arc 90 x 110 un-assembled - 20 pcs* 0700 000 939Eco-Arc 51 x 108 un-assembled - 20 pcs* 0700 000 940Eco-Arc 83 x 108 un-assembled - 20 pcs * 0700 000 941Eco-Arc 98 x 75 un-assembled - 20 pcs* 0700 000 942Eco-Arc 55 x 110 un-assembled - 20 pcs* 0700 000 949

* This helmet is delivered with the headgear unattached.

Eco-Arc HelmetsEco-Arc Welding Helmets

The new Eco-Arc is the latest design in flip front passive welding helmets. With a light weight PolyPropylene shell, and outstanding facial protection, the helmet is suitable for all position welding. Availablein six different sized flip front options, the helmet also adopts the new Eco Headgear, with 4 rake positionsand 3 longitudinal adjustment positions for precise nose to shell adjustment. The helmet is suppliedcomplete with outer protection lens, shade 11 mineral glass and the unique large internal protection glass.


1 Inside Cover Lens Eco-Arc 0700 000 2522 Sweat Band 0700 000 2443 Lens Retaining Clip 60 x 110 0700 000 2553 Lens Retaining Clip 90 x 110 0700 000 2563 Lens Retaining Clip 98 x 75 0700 000 2573 Lens Retaining Clip 83 x 108 0700 000 2583 Lens Retaining Clip 55 x 110 0700 000 2593 Lens Retaining Clip 51 x 108 0700 000 260

Spares for Eco-Arc Helmets (Fig 15)

Spares for Eco-Arc Helmets Fig 15

1

3

2

Please see pages52 for standardsize lenses

Euromask is a helmet for welding and cutting that provides effectiveprotection from UV and IR radiation. The visor must always be downwhen welding. The large field of vision provides effective protection forthe eyes when grinding. Euromask can be combined with various IR andUV protectors. Also available with a protective helmet or prepared foruse with a fresh air unit.

Euromask DIN 10 1.7 + 8 DIN 0000 500 501Euromask DIN 11 1.7 + 10 DIN 0000 500 500Euromask with protective helmet DIN 10 0349 501 913Euromask with protective helmet DIN 11 0349 501 912Euromask for protective helmet DIN 10 0000 500 502Euromask for protective helmet DIN 11 0000 500 503Euromask DIN 10 prepared for air 0700 000 901Euromask DIN 11 prepared for air 0700 000 902Air Hose 0468 127 011Chin cover 0000 500 522Visor DIN 5 0000 500 525Visor DIN 8 0000 500 514Visor Large DIN 8 0000 500 318Visor DIN 10 0000 500 515Visor large DIN 10 0349 501 088UV protector clear (inner glass) 0000 500 526UV protection DIN 1.7 (inner glass) 0000 500 512UV protection DIN 3 (inner glass) 0000 500 513UV protection DIN 5 (inner glass) 0000 500 524Visor frame 0000 500 511Head gear 0000 500 519Spare part for head gear 0000 500 520Hinge set for visor 0000 595 208Face seal for fresh air helmet 0700 002 078

Euromask

This leather mask can be used when there is not enough space forwelding with a conventional welding helmet. Glass size 90 x 110mm.

Leather mask 0000 593 221

Leather Mask

A traditional short shell helmet made from high performance glass fibre.Weight 600g. Lens aperture 108 x 83mm (4 1/4” x 31/4”).

SF11 0700 654 889Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF11 Helmet Short Shell

A lightweight thermoplastic helmet weighing 420g. Lens aperture 108 x 83mm (4 1/4” x 31/4”).

SF8 0701 380 430Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF8 Lightweight Helmet

A safe welding screen with replaceable welding glass, 60 x 110mm.

Hand screen E 0332 109 880

Hand Screen E

3736


The Easy-Lite is a small but effective light source, that can be easilyattached to your welding helmet, hard hat, spectacle or anywhere thatadditional light is required. The Easy-Lite has also proven to be anexcellent tool for adapting to a stainless steel inspection mirror, the bright LED is perfect for highlighting the weld in difficult places wherethere is insufficient light. The LED is turned on by a simple switch, andthe battery has over 50 hours of life.

ESAB Easy-Lite 0700 014 040

ESAB Easy-Lite

3938

A safe welding screen that also protects the hand. Replaceable weldingglass, size 60 x 110mm. Weight 330g.

Hand screen H with clear and coloured glass 0160 294 880

Hand Screen H

Welding screen that protects the face as well as the hand. The windowsize is 90 x 110mm. Welding glass not included.

Hand screen Delta 0700 000 900

Hand Screen Delta

Deep shell fibre glass screen. Weighs 525g. Lens aperture 108 x 83mm(41/4” x 31/4”).

Hand screen SF12 0700 654 890

Hand Screen SF12

Flat fronted fibreglass hand screen. Weight 450g. Lens aperture 108 x 83mm (41/4” x 31/4”).

Hand screen SF2 0700 655 002

Hand screen SF2

Helmets, Masks & Screens Filter & Spatter Lenses

Traditional glass filter lenses of excellent UV- and IR protection andthermal stability. Solid glass lenses are not robust and must be used witha polycarbonate backing lens and a glass- or plastic cover lens.

Filter Lenses

Filter Lens 98 x 75 shade 9 Pk 25 0000 915 059Filter Lens 98 x 75 shade 10 Pk 25 0000 904 305Filter Lens 98 x 75 shade 11 Pk 25 0000 915 060Filter Lens 98 x 75 shade 12 Pk 25 0000 915 061Filter Lens 98 x 75 shade 13 Pk 25 0000 915 062Filter Lens 60 x 110 shade 8 Pk 25 0160 292 000Filter Lens 60 x 110 shade 9 Pk 25 0160 292 001Filter Lens 60 x 110 shade 10 Pk 25 0160 292 002Filter Lens 60 x 110 shade 11 Pk 25 0160 292 003Filter Lens 60 x 110 shade 12 Pk 25 0160 292 004Filter Lens 60 x 110 shade 13 Pk 25 0160 292 005Filter Lens 90 x 110 shade 9 Pk 25 0760 031 631Filter Lens 90 x 110 shade 10 Pk 25 0760 031 632Filter Lens 90 x 110 shade 11 Pk 25 0760 031 633Filter Lens 90 x 110 shade 12 Pk 25 0760 031 634Filter Lens 90 x 110 shade 13 Pk 25 0760 031 635Filter Lens 50 x 105 shade 9 Pk 25 0590 028 216Filter Lens 50 x 105 shade 10 Pk 25 0590 028 217Filter Lens 50 x 105 shade 11 Pk 25 0590 028 218Filter Lens 50 x 105 shade 12 Pk 25 0590 028 219Filter Lens 50 x 105 shade 13 Pk 25 0590 028 220

Filter Lens 51 x 108 shade 9 Pk 25 0760 031 601Filter Lens 51 x 108 shade 10 Pk 25 0760 031 602Filter Lens 51 x 108 shade 11 Pk 25 0760 031 603Filter Lens 51 x 108 shade 12 Pk 26 0760 031 604Filter Lens 51 x 108 shade 13 Pk 25 0760 031 605Filter Lens 50mm Diameter shade 4 0000 665 604Filter Lens 50mm Diameter shade 5 0000 665 605Filter Lens 50mm Diameter shade 6 0000 665 606Filter Lens 8EW 108 x 83 (41/4" x 31/4") Pk 10 0701 416 367Filter Lens 9EW 108 x 83 (41/4" x 31/4") Pk 10 0701 416 369Filter Lens 10EW 108 x 83 (41/4" x 31/4") Pk 10 0701 416 371Filter Lens 11EW 108 x 83 (41/4" x 31/4") Pk 10 0701 416 373Filter Lens 12EW 108 x 83 (41/4" x 31/4") Pk 10 0701 416 375Filter Lens 13EW 108 x 83 (41/4" x 31/4") Pk 10 0701 416 376

A suitable cover lens must be used to protect the filter lens from spatterand damage.

Cover Lens 60 x 110 glass Pk 25 0291 102 701Cover Lens 60 x 110 plastic Pk 100 0160 307 001Cover Lens 90 x 110 glass Pk100 0760 031 040Cover Lens 90 x 110 plastic Pk 100 0160 307 004Cover Lens 51 x 108 glass Pk 25 0760 031 010Cover Lens 51 x 108 plastic Pk 100 0160 307 002Cover Lens 50 x 105 glass Pk 100 0590 028 221Cover Lens 50x105 plastic Pk 100 0590 028 222Cover Lens 98 x 75 glass Pk 100 0000 915 058Cover Lens 98 x 75 plastic Pk 100 0000 915 097Cover Lens 108 x 83 (41/4 x 31/4) glass Pk 10 0701 416 341Cover Lens 108 x 83 (41/4 x 31/4) plastic Pk 10 0701 416 332Cover Lens Diameter 50mm glass Pk 50 0000 665 600Cover Lens Diameter 50mm plastic Pk 50 0000 665 618

CR 39 Cover lensesCover Lens CR39 108 x 51 (4 1/4 x 2) Pk10 0701 416 348Cover Lens CR39 108 x 51 (4 1/4 x 2) Pk100 0701 416 349Cover Lens CR39 108 x 83 (4 1/4 x 3 1/4) Pk10 0701 416 350Cover Lens CR39 108 x 83 (4 1/4 x 3 1/4) Pk100 0701 416 351Cover Lens CR39 60 x 110 Pk10 0701 416 352Cover Lens CR39 90 x 110 Pk10 0701 416 354

Cover Lenses

4140

The hard hat for New-Tech and Eye-Tech provides the user with thelightest, strongest and most comfortable helmet available. The helmet ismanufactured from ABS material and weighs only ~300g. The head gearis equipped with a ratchet adjustment for easy adjustment and comfort.Approved to EN 397.

Hard hat Concept Yellow 0700 000 052Hard hat Concept White 0700 000 135Hard hat Concept Blue 0700 000 136Hard hat Concept Green 0700 000 137Hard hat Concept Red 0700 000 138

Hard Hat for New-Tech and Eye-Tech

The G2000 hard hat is designed to fit the Albatross series of weldinghelmets whilst the G22 will fit together with the Euromaski welding helmet.

Hard hat G2000 0468 051 881Hard hat G22 0468 051 880

Hard Hat G2000 and G22

ESAB’s hearing protectors are available in three different versions; One that can be attached to a protective helmet, one with neck support,one with head support. All of these provide effective protection atdifferent decibel levels.

Hearing protector with neck support 0700 001 880Hearing protector with head support, SNR 26 dB 0000 595 199Hearing protector for G22c, yellow SNR 26 dB 0367 420 002Hearing protector for G2000c, yellow SNR 26 dB 0367 420 003Economy ear defender SNR 21 dB 0701 380 477

Hearing Protection

The baseball bump cap provides lightweight head protection where highimpact resistance is not essential, but where there is a risk of minorbumps or scrapes to the head. A high level of comfort is provided by the liner and cap design and the large side mesh panels allow for themaximum ventilation allowed within EN 812.

Bump cap 0700 000 925

Bump Cap

Hard Hats & Hearing Protection

The Air 160 powered respiratory systems have been upgraded toincrease the levels of comfort and safety for the welder. It provides 160 litres of clean/filtered air per minute to give a more pleasant workingenvironment. The unit only weighs 1kg but will still withstand thetoughest of environments. The unit is supplied with a P3 filter with anextraordinary filtration capacity. The battery, which have an operatingcapacity of 8 hours, can be charged separate from the motor unit,hence it can be utilised when working double shifts. The Air 160 can beused together with the Eye-Tech, Eye-Tech II, New-Tech, Euromask,Albatross, Spraying/grinding & Grinding Visor.

ESAB Air 160-8H Complete (EU) 0700 002 926ESAB Air 160-8H Complete (UK) 0700 002 954

ESAB Air 160

The Air 200 powered respiratory system is approved to EN 12941:1998.The power unit is equipped with a flashing visible and audio low flowalarm that indicates when the battery is running low or when the filter isblocked. The unit provides 200 litres of clean/filtered air per minute toprovide a comfortable working environment. The unit is equipped with an improved battery pack utilising a small case. The overall weight of the complete unit has been reduced whilst the battery capacity is stillkept at 8 h. The intelligent charger will ensure a prolonged lifetime of the battery by reducing the risk of over charging.

Air 200 Complete (EU and UK) 0700 002 999

ESAB Air 200

The Origo Air is a battery powered respiratory unit is designed to fit theOrigo-Tech welding helmets. The unit provides clean/filtered air toincrease the comfort and safety for the welder. The Origo Air is deliveredcomplete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. This unit is supplied with anintelligent charger, which ensures a prolonged life time of the battery, byreducing the risk of over charging. The Origo Air is equipped with a lowflow alarm, which will give an audible signal when the filter is blocked orthe battery power is running low. The complete system is comfortable,lightweight and durable.

Origo Air Complete (EU and UK) including Air Hose 0700 002 100

Origo™ Air

Respiratory Equipment

ESAB Air

ESAB always recommend the use of a full respiratory system for maximum protection against weldingfume. For the ultimate protection and for use in the most aggressive of welding environments, ESAB offerthe Air 200, Air 160 and Origo™ Air.



4342


1 Head seal Eye-Tech 0700 002 0121 Head seal New-Tech / Eye-Tech II 0700 002 0482 Air channel Eye-Tech 0700 002 0022 Air channel New-Tech / Eye-Tech II 0700 002 0503 Screws for air channel 0700 002 0284 Face seal Eye-Tech 0700 002 0194 Face seal New-Tech / Eye-Tech II 0700 002 0495 Air hose New-Tech / Eye-Tech /

Eye-Tech II 0468 127 0115 Air hose New-Tech / Eye-Tech /

Eye-Tech II 1m 0700 002 0555 Air hose New-Tech / Eye-Tech /

Eye-Tech II - Heavy Duty 0700 002 0815 Air hose Albatross 0700 002 0326 Velcro set (Eye-Tech only) 0700 002 0157 Comfort pad standard 0700 002 0217 Comfort pad large 0700 002 0228 Air 160 motor unit 0700 002 0428 Air 200 motor unit 0700 002 0799 P3 filter 0700 002 0249 P2 filter 0700 002 018

9 P2 filter carbon 0700 002 04110 Pre filter Pk 5 0700 002 02310 Carbon Pre filter Pk 10 0700 002 04011 Battery small Air 160 0700 002 01311 Battery small Air 200 0700 002 08012 Battery charger small 2 Pin (EU) 0700 002 02012 Battery charger small 3 Pin (UK) 0700 002 04412 Battery charger large 2 Pin (EU) 0700 002 03112 Battery charger large 3 Pin (UK) 0700 002 04512 Intelligent charger 0701 416 20312 Five way intelligent charger 0701 416 13613 Waist belt 0700 002 02714 Holder for air channel 0700 002 02915 Battery large Air 160 0700 002 01415 Battery large Air 200 0700 002 08216 Air 160 complete (EU) 0700 002 92616 Air 160 complete (UK) 0700 002 95416 Air 200 complete EU & UK 0700 002 99917 Proban hose cover 0349 501 07118 Air flow indicator 0468 127 004

Back plate (not shown) 0701 502 396

1 Face Seal 0700 002 1012 Air Duct 0700 002 1023 Head Gear 0700 000 2434 Air Hose 0700 002 1035 Proban Hose Cover 0700 002 1046 Motor Unit 0700 002 1057 Filter 0700 002 1068 Charger Adapter 0700 002 1079 Battery 0700 002 10810 Waist Belt 0700 002 109

Spares for Air 160/200 (Fig 16)

Spares for Air 160/200 Fig 16 COMPATIBLE MOUNTING KIT

ESAB offers a compatible mounting kit forthe Eye-Tech, Eye-Tech II & New-Tech.This allows the helmet to be adapted toeither the Air 160 or Air 200 respiratory unit.

Mounting kit Eye-Tech 0700 002 030(Face seal, Velcro, head seal, air channel)

Mounting kit Eye-Tech II & New-Tech 0700 002 047(Face seal, velcro, head seal, air channel)

Spares for Origo Air (Fig 17)


Origo™ Air

Spares for Origo Air Fig 17

1

2

3

4

67

8

9

10

5

4544

The waist mounted regulator is pre-set to reduce the air from high to lowpressure and has integral low flow warning alarm. The unit is encased toprotect the regulator. The regulator is delivered with an air supplyconnector which connects the air hose to the regulator. The regulatorcan be combined with Eye-Tech, Eye-Tech II, New-Tech, grinding/spraying helmet & Grinding Visor. The unit is supplied complete withwaist belt. The maximum input working pressure is 10 bar (145 psi).

ESAB Air CA regulator 0349 501 072Air supply connector 0701 416 178Airline 10 meters 0701 416 188

ESAB Air CA

The filter system consists of three filtration units which will removeliquids, solid contaminants, oil vapour and odours from the compressed air supply and provides clean breathing air to the operators.The filtration bank should be used when a clean air supply is notavailable. The units are fitted with 1/4" (6,4mm) input hose tail adapter, a 0,5-10 bar adjustable regulator, twin output ‘quick-snap’ style hoseconnectors for 1 or 2 operators and a gauge as a guide to outputpressure. The filtration bank can be supplied for wall mounting or on a portable frame.

Filtration Bank Framed 0701 416 183Filtration Bank Wall Mounted 0701 416 184

Spares filters for Filtration BankPrefilter 0701 416 185Caolescing Filter 0701 416 186Charcoal Filter 0701 416 187

ESAB Compressed Air Filtration Bank


ESAB Compressed Air Systems (CA)

The BA system can be used in combination with the Eye-Tech helmet andhard hat. The Full Face Mask Fresh Air System can be used either asunpowered (Negative pressure), where the air is drawn through the systemby the normal breathing of the user, or as a Powered system where air issupplied by connecting a mini turbine to the end of the air supply hose.The choice of which system to use is left to the user. Normally if thesystem is likely to be used for any significant period of time (i.e. over anhour) then the powered option is preferable in terms of comfort to theuser. The unpowered system should be used if there is no power availablefor the turbine or if the atmosphere where the turbine is to be sited doesnot permit the use of electrical equipment (for example a potentiallyexplosive atmosphere). Both systems conform to the higher specificationof EN 138, namely Fresh air BA EN 138 class 2. The system with class 2hoses offers a Nominal protection factor of 2000 as defined in EN 138.Suitable applications are potentially oxygen deficient atmospheres, eg.welding in a confined space (tanks, silos, vats, pits).

Unpowered Fresh-Air hose system 0701 502 440Powered or Unpowered Fresh-Air hose system 0701 502 441Mini Turbine powered Fresh-Air System 0701 502 442

Spares for BA systemFull-Face mask 0701 502 443Full-Face mask with Twin air Hose 0701 502 444Full-Face mask with Twin air Hose and overflow valve 0701 502 445Twin hose with overflow valve 0701 502 446Twin hose 0701 502 4479 meter hose assy 0701 502 44810 meter hose assy 0701 502 44920 meter hose assy 0701 502 45030 meter hose assy 0701 502 45140 meter hose assy 0701 502 452Mini Turbine 110v 0701 502 453Mini Turbine 240v 0701 502 454Belt with Hose connector 0701 502 455Replacement flame retardant 1.5m belt 0701 502 456Strainer and anchor pin assy 0701 502 457Storage case (Plastic) 0701 502 458Mask Wipes 0701 502 459Replacement full face mask visor 0701 502 460Full face mask visor protector 0701 502 461Replacement Full-face mask valve set 0701 502 462Replacement O Rings for hoses 0701 502 463Replacement foam filter for mini turbine 0701 502 464Adapter 0701 502 465


BA System

4746


Filtair Disposable Masks

The ESAB Filtair series has been developed toimprove the comfort of disposable respirators whilstmaintaining an excellent face fit. Colour coding therange makes identification simple when varyinglevels of protection may be required. The mesh shellsupports the filter media and prevents collapse ontothe face and the preformed nose bridge providescomfortable fit eliminating constant adjustment. The filters use the latest filter technology to promotelow breathing resistance and are approved toEN149:2001 (meeting the 120mg load testing). The Filtair is available as a pre-moulded and a flatversion. Depending on the protection level neededand the breathing resistance some models areequipped with a valve. All the masks are fitted withbuckle fastening which also allows the wearer toadjust the straps accordingly.

The system consist of a hard hat combined with a flip up polycarbonatevisor. Air is feed into the head piece via an air hose from the air unit.ESAB offer visor covers to protect and increase the life of the visor.

Grinding /spraying helmet incl hose 0701 416 189

Spares for grinding/spraying helmetReplacement visor clear 0701 416 233Replacement visor DIN5 green 0701 500 000Visor covers 0701 416 182Face seal 0701 416 234Hearing protection 0701 416 200Brow guard and arms 0700 002 056

Grinding and Spraying Helmet for Air

Filtered air is ducted from the Power Unit or Regulator up a spiralreinforced PVC hose, and into an air channel. The air is directed into the top of the visor area maximising anti misting around thebreathing zone. The visor can be combined with either Air 160/200/CAor compressed air.

Air fed grinding visor 0700 002 915

Spares for Grinding visor for AirFace seal 0700 002 057Head seal 0700 002 058Replacement visor 0700 002 059

Grinding visor for Air 160/200/CA


Air Fed Grinding Visors

4948

Respiratory Equipment Respiratory Equipment

This mask provide P2 protection and is equipped with a valve to reduceheat and moisture build up inside the respirator. Suitable to wear whensanding painted metals, powder coating and sanding cured resins.

ESAB Filtair Pro P2V ‘Blue’ Pk 10 0700 002 201

ESAB Filtair Pro 8020V

This mask provide P2 protection and is equipped with a valve to reduceheat and moisture build up inside the respirator. The carbon layer takesout bad odours. Suitable to wear during welding, brazing, soldering,painting (brush applied), gluing (brush applied) and polyester resins (hand mix).

ESAB Filtair Pro P2CV ‘Grey’ Pk 5 0700 002 202

ESAB Filtair Pro 8020CV

This mask provide P3 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. Suitable to wearduring molten metal handling, welding, machining, grinding, polishingand finishing.

ESAB Filtair Pro P3V ‘Orange’ Pk 5 0700 002 203

ESAB Filtair Pro 8030V

This mask provide P2 protection and is equipped with a valve to reduceheat and moisture build up inside the respirator. Suitable to wear whensanding painted metals, powder coating and sanding cured resins.

ESAB Filtair Flat P2V ‘Blue’ Pk 20 0700 002 205

ESAB Filtair Flat A-2V

This mask provide P2 protection and is equipped with a valve to reduceheat and moisture build up inside the respirator. The carbon layer takes out bad odours. Suitable to wear during welding, brazing,soldering, painting (brush applied), gluing (brush applied) and polyesterresins (hand mix).

ESAB Filtair Flat P2CV ‘Grey’ Pk 20 0700 002 206

ESAB Filtair Flat A-2CV

This mask provide P3 protection and is equipped with a valve to reduceheat and moisture build up inside the respirator. Suitable to wear during molten metal handling, welding, machining, grinding, polishingand finishing.

ESAB Filtair Flat P3V ‘Orange’ Pk 20 0700 002 207

ESAB Filtair Flat A-3V

This mask provide P1 protection and is suitable to wear during generaldusty duties.

ESAB Filtair Flat P1 ‘White’ Pk 20 0700 002 204

ESAB Filtair Flat A-1

This mask provide P1 protection and is suitable to wear during generaldusty duties.

ESAB Filtair Pro P1 ‘White’ Pk 20 0700 002 200

ESAB Filtair Pro 8010

5150

Spectacles, Goggles & Visors Spectacles, Goggles & Visors

The clear lens is suitable when working indoors, providing general eye protection.

ESAB Pro Clear 0700 012 013

ESAB Pro Clear

ESAB Pro Safety Spectacles

These stylish spectacles are used for drilling, chipping and metalworking. They have a sporty style, soft to the touch, and have a lightweight wrap around, including a neck cord. They are extremely flexible anddurable, and are available in four different lens configurations. All lens configurations provide protectionagainst dangerous UV radiation. CE approved according to EN 166-F. There are 10 pairs packed per box.

The smoked lens is suitable when working in strong ambient light.

ESAB Pro Smoked 0700 012 014

ESAB Pro Smoked

The Amber (yellow lens) enhances the light. This is suitable when theambient light is not sufficient.

ESAB Pro Amber 0700 012 015

ESAB Pro Amber

The shade 5 spectacle provide protection not only against IR/UV lightbut also against the visible light during gas welding/cutting.

ESAB Pro Shade 5 0700 012 016

ESAB Pro Shade 5

The clear lens is suitable when working indoors, providing general eye protection.

ESAB Eco Clear 0700 012 017

ESAB Eco Clear

ESAB Eco Safety Spectacles

These stylish spectacles are used for drilling, chipping and metalworking, they have a sporty style and are extremely lightweight. Available in three different lens configurations. All lens configurations provideprotection against dangerous UV radiation. CE approved according to EN 166-F. There are 10 pairspacked per box.

The smoked lens is suitable when working in strong ambient light.

ESAB Eco Smoked 0700 012 018

ESAB Eco Smoked

The Amber (yellow lens) enhances the light. This is suitable when theambient light is not sufficient.

ESAB Eco Amber 0700 012 019

ESAB Eco Amber

5352

Spectacles, Goggles & Visors Spectacles, Goggles & Visors

ESAB Visitor spectacle protects the eye from flying particles. The lensesare made of impact-resistant polycarbonate. The spectacles (frames &lenses) are certified to EN 166:2001.

ESAB Visitor Spectacle 0700 012 021

ESAB Visitor Spectacle

The special injected frame offers supreme user comfort as well asdurability. Expanded Visual field. Cross Vent technology keeps air flowingin and moisture out. Moulded 2mm poly carbonate lens provides greatimpact protection. These goggles meet ANSI Z87.1+ impact standard.ESAB Revolution Clear Chemical Splash Goggle is CE Certified toEN166’S’.

ESAB Ski Goggle Clear 0700 012 027

ESAB Ski Goggle Clear

The special injected frame offers supreme user comfort as well asdurability. Expanded Visual field. Cross Vent technology keeps air flowing in and moisture out. Moulded 2mm poly carbonate lens providesgreat impact protection. These goggles meet ANSI Z87.1+ impactstandard. ESAB Revolution UVIR Shade 5 is CE certified in addition toEN 169:2002 Optical Radiation (Welding).

ESAB Ski Goggle Shade 5 0700 012 026

ESAB Ski Goggle Shade 5

Provides protection against liquid splashes, dusts and spatter.

ESAB Chemical Goggle 0700 012 025

ESAB Chemical Goggle

A one piece goggle with a soft moulded body, indirect ventilation and a108 x 51mm (4 1/4” x 2) lens aperture. Fitted with a shade 5 filter and willfit over prescription spectacles.

ESAB Flip Front Goggle 4 x 2 1/4 Shade 5 0700 012 024

ESAB Flip Front Goggle 4 x 2 Shade 5

Protective goggle shade 5 for gas welding, brazing and gas cutting. The goggles are ventilated and have a flip-front mechanism. CE approvedaccording EN 166/EN 175.

ESAB Flip Front Goggle, Shade 5 0700 012 022

ESAB Flip Front Goggle Round Shade 5

A strong lightweight brownguard featuring an adjustable head harness and clear polycarbonate screen (200mm) in shade 5 or clearanti glare screen.

Grinding Visor Complete 0700 012 020Replacement Visor Clear 0700 012 023

Grinding Visor Complete

5554

Welding Curtains Welding Curtains

Three colour types are available and all three can be supplied asstandard curtains, as well as strip curtains. The self-extinguishingmaterial provides good protection from dangerous welding radiation. The curtains are equipped with press-studs for easy, strong fasteningand they are folded at the top and the bottom to withstand harsh use.The strip curtain allows access and enables material to be passedthrough, even when it is closed. All approved according to prEN 1598.The mounting rings come in a package of seven, which is enough tomount any of the curtains (standard as well as strip). Rings are includedwhen ordering any of the curtains.

Welding curtain, dark red, 1.8 x 1.4m 0700 008 004Welding curtain, green transparent, 1.8 x 1.4m 0700 008 005Welding curtain, dark green (DIN 9), 1.8 x 1.4m 0700 008 006Welding strip curtain, dark red, 1.8 x 1.4m 0700 008 001Welding strip curtain, green transparent (DIN 6), 1.8 x 1.4m 0700 008 002Welding strip curtain, dark green (DIN 9), 1.8 x 1.4m 0700 008 003Mobile curtain, without wheel, dark red, 2 x 1.4m 0000 595 313Mobile curtain, without wheel, dark red, 2 x 2m 0000 595 315Mounting rings PVC 0700 008 007Mounting rings metal 0700 008 008

Welding Curtains

The new frame is made from jointed 32 and 22mm diameter steeltubing, with the joints to the leg portions being precision swaged for asturdier joint. The ultra stable frame with a 700mm pitch for the feetwidth comes with rubber feet as standard. The offset legs enable twoframes to be put together to make a tight 90 corner, or 4 framestogether to make a cubicle.

As standard the Versi Flex frame can make 3 width sizes: 1) 1000 as a frame to make a cutting barrier with a Welding Blanket. 2) 1400 as the standard welding curtain frame. 3) 2000 as wider version of the above.

Options for the frame: 1) A set of 4 wheels, these simply screw into the sockets covered by the

standard rubber feet, turning the screen into a mobile. 2) A set of 2 outriggers, these handy outriggers extend the frame from

2000 to 4000 wide, but can also be used to make sides to a standardframe as a partial cubicle.

ESAB VersiFlex frame system 0700 008 020Set of outrigger arms (Set of 2) 0700 008 021Set of wheels (Set of 4) 0700 008 022

ESAB VersiFlex Frame for Welding Curtains

The wire reel is used when hanging the curtains. The wire is an 8 metreretractable stainless steel line. The unit is fixed to the wall and the line istightened by using the specially designed torque control.

Wire reel for welding curtain 0700 008 018

Wire Reel for Welding Curtains

5756

Welding Blankets

Welding Blankets Welding Blankets

The ESAB Welding blankets are produced using heat and flame resistant fabrics. The blankets provideexcellent protection from grinding/welding sparks, slag and drops of molten metal. ESAB offer a widerange of blankets with different characteristics and in many different sizes. The blankets are colour coded.

When selecting the most suitable blanket for the application, the following factors should be considered:

Positioning of the blanket – Sparks hitting a blanket, which is positioned horizontally, will put extra stress onthe material and a stronger and more heat resistant blanket should be used.Work application – For light duty welding or cutting a thinner and less heat resistant blanket can be used.For heavy duty welding or cutting when the blanket is exposed to drops of molten metal then a more durableblanket should be used.Flexibility – The weight of the blanket indicates how flexible the fabric is. A blanket of less weight makes iteasier to protect small pipes and components where it’s necessary to wrap the blanket.

Uncoated fibreglass blanket for light sparks and spatter. Best when usedon an incline of at least 15 degrees. Maximum temp. = 550°C, Weight = 600 g, Colour = Tan.

2m x 1m 0700 008 0232m x 2m 0700 008 024

1m x 25m roll 0700 008 025

Welding Blanket 1850

Acrylic coated fibreglass blanket for light sparks and spatter. Provides anexcellent vertical screen to protect equipment and personnel from the sprayof sparks. Specially coated to be used in oil and moisture environments.Maximum temp. = 550°C, Weight = 460 g, Colour = Grey.


Light Duty Applications

Vermiculite coated fibreglass blanket with higher heat resistance. Suitablefor medium to heavy duty industrial applications. Not suitable in very oilysituations. Maximum temp. = 750°C, Weight = 750 g, Colour = Black.

Welding Blanket 906

Medium Duty Applications

Uncoated silica welding blanket for heavy duty applications. The silica fibrehas a high melting temperature of 1350°C making it an excellent choicewhen drops of molten metal are a problem. The 2-1900 blanket resistsmost acids. Maximum temp. = 1300°C, Weight = 600 g, Colour = Bronze.

Welding Blanket 2-1900

A carbon fibre felt welding blanket for heavy duty applications. Thisblanket offers extreme heat resistance of 1650°C. The 5180 is extremelylight and simple to clean and it’s been designed for the automotiveindustry. Maximum temp. = 1300°C, Weight = 425 g, Colour = Black.


Heavy Duty Applications

2m x 1m 0700 008 0262m x 2m 0700 008 027

1m x 25m roll 0700 008 028

2m x 1m 0700 008 0292m x 2m 0700 008 030

1m x 25m roll 0700 008 031

2m x 1m 0700 008 0322m x 2m 0700 008 033

1m x 25m roll 0700 008 034

2m x 1m 0700 008 0352m x 2m 0700 008 036

1m x 25m roll 0700 008 037

5958

Welding Clothing Welding Clothing

The ESAB Proban/leather jackets are designed for maximum comfortand safety. The sleeves and shoulders are made in durable grade Aleather to withstand the exposure to welding spatter. The front and backis made from flame retardant Proban material. The garment featureconcealed inner pockets, adjustable sleeves and a stand up collar.Kevlar stitched.

ESAB Proban/Leather welding jacket, M 0700 010 301ESAB Proban/Leather welding jacket, L 0700 010 302ESAB Proban/Leather welding jacket, XL 0700 010 303ESAB Proban/Leather welding jacket, XXL 0700 010 304

Welding Jackets

The ESAB Proban/Leather trousers are designed for maximum comfortand safety. The front of the legs are reinforced with leather to withstandthe spatter and welding sparks. Kevlar stitched.

ESAB Proban/Leather welding trousers, M 0700 010 333ESAB Proban/Leather welding trousers, L 0700 010 334ESAB Proban/Leather welding trousers, XL 0700 010 335ESAB Proban/Leather welding trousers, XXL 0700 010 336

Welding Trousers

The ESAB protective aprons distribute the weight effectively. They areKevlar stitched and 107cm long.

ESAB Apron 0700 010 007

Welding Aprons

The Jacket & Trousers are made from an inherent flame resistant fabric.This allows the garments to be washed an unlimited amount of times without loosing the flame resistance. The Jacket has a front velcrozip, and adjustable velcro cuffs, allowing the wearer to adjust the size to fit a welding glove. The Jacket is extremely lightweight, whilst beinghighly durable. There are two chest pockets, and a inside concealed zip front. EN 531 (A, B1, C1).

Welding Jacket S 0700 010 337Welding Jacket M 0700 010 338Welding Jacket L 0700 010 339Welding Jacket XL 0700 010 340Welding Jacket XXL 0700 010 341Welding Trousers S 0700 010 342Welding Trousers M 0700 010 343Welding Trousers L 0700 010 344Welding Trousers XL 0700 010 345Welding Trousers XXL 0700 010 346

Black Flame Resistant Jacket & Trousers

ESAB Welding jackets are made of high quality leather. The front isreinforced in order to withstand mechanical and thermal stress. The jacket is stitched with Kevlar thread, features stand up collar andinside pocket with adjustable wrists.

Welding Jacket M 0700 010 266Welding Jacket L 0700 010 002Welding Jacket XL 0700 010 003Welding Jacket XXL 0700 010 267

Welding Jacket

The shoulder jacket gives freedom of movement and is more comfortablethan a standard jacket when working in a warm environment. It has areinforced front and adjustable wrists. The shoulder jacket should be worntogether with the apron designed specially for use with the shoulder jacket.

ESAB Shoulder jacket, L 0700 010 004ESAB Shoulder jacket, XL 0700 010 005Apron for shoulder jacket (one size) 0700 010 268

Shoulder Welding Jacket

Leather gaiters to protect the footwear during welding. The gaiters arefastened using velcro.

Leather gaiters 0700 010 008

Leather Gaiters

Chrome leather sleeves with a total length of 47cm. Equipped withelasticated cuff and velcro arm fastening.

Welding sleeve 0000 595 039

Welding Sleeve

Available fromJune 2009

Available fromJune 2009

6160

Coveralls Head Protection

The ESAB Black and Yellow coverall has been designed to give thewelder maximum protection. The garment is made from a highly durableand flame resistant material. The coverall features an elasticated waistfor better comfort and fit, adjustable sleeves and legs and a covered/protected zipper. The neck is protected by the stand up collar and kneepads can be fitted.

ESAB welders coverall, size S 0700 010 328ESAB welders coverall, size M 0700 010 329ESAB welders coverall, size L 0700 010 330ESAB welders coverall, size XL 0700 010 331ESAB welders coverall, size XXL 0700 010 332

ESAB Coverall

100% cotton, flame resistant, 2 zipped chest pockets, concealed stud and zip. CE approved to EN531 (A, B2, C1) and EN470-1.

Flame Retardant Hi Vis coveralls 36” (92cm) Orange 0701 502 334Flame Retardant Hi Vis coveralls 38” (97cm) Orange 0701 502 335Flame Retardant Hi Vis coveralls 40” (102cm) Orange 0701 502 336Flame Retardant Hi Vis coveralls 42” (107cm) Orange 0701 502 337Flame Retardant Hi Vis coveralls 44” (112cm) Orange 0701 502 338Flame Retardant Hi Vis coveralls 46” (117cm) Orange 0701 502 339Flame Retardant Hi Vis coveralls 48” (122cm) Orange 0701 502 340Flame Retardant Hi Vis coveralls 50” (127cm) Orange 0701 502 341Flame Retardant Hi Vis coveralls 52” (132cm) Orange 0701 502 342Flame Retardant Hi Vis coveralls 54” (137cm) Orange 0701 502 343Flame Retardant Hi Vis coveralls 56” (142cm) Orange 0701 502 344Flame Retardant Hi Vis coveralls 58” (147cm) Orange 0701 502 373

Flame Retardant Hi Visibility Coverall

The ESAB navy fire retardant 100% cotton coverall comes with 2 chestpockets a ruler pocket and has concealed stud fastenings. Conforms to EN 531, EN 470-1 & EN 533.

ESAB Proban coverall, M 0700 010 038ESAB Proban coverall, L 0700 010 039ESAB Proban coverall, XL 0700 010 040ESAB Proban coverall, XXL 0700 010 041

Welding Coveralls (Flame Retardant)

Flame resistant head protection which cover not only the head but alsothe neck, nape and shoulders.

Proban hood 0000 593 269

Proban Hood

These two pieces of leather material, offer protection to the head, neckand chest area. They are ideal for welding in areas where all roundprotection is needed, to protect against sparks, spatter and any other air born particles from the welding environment. They are split into twopieces. One piece is covering the chest area, whilst the other piece iscovering the head and neck area at the back of the helmet. They caneasily be adapted to the Origo-Tech, New-Tech, Eye-Tech & Eye-Tech IIwelding helmets.

Leather Chest Protection 0700 000 062Leather Head/Neck Protection 0700 000 063

Leather Head and Chest Protection

The balaclava is worn underneath the welding helmet to give you fullhead protection when working in a cold environment. The balaclava isflame resistant, 100% zirpro treated wool, 385 gr/m2 EN531.

Balaclava 0700 010 269

Balaclava

The insulated helmet liner is worn underneath the welding helmet to offerprotection from the elements when working in a cold environment.

Insulated helmet liner 0000 904 378

Insulated Helmet Liner

Availablefrom JulyAvailablefrom July

6362

Welding Gloves Welding Gloves

Welding Gloves MIG/MAG/MMA

All ESAB and Murex gloves are CE approved. The heavy duty welding gauntlets and riggers have beentested and certified by a third party notifying body. The glove is then a Cat. 2 product.

Test against mechanical stress such as abrasion, cut, tear and puncture.

Test for thermal performance such as exposure to an open flame, contact heat, convective heat,radiant heat, small and large splashes of molten metal.

These superior new welding gloves from ESAB offer a whole newapproach to fit, form and function. Ergonomicaly designed to fit thenatural curve of the hand, offering increased quality & comfort to thewearer. The MIG glove is made from heavy & fine cut leather, and is lined from hand to cuff. With the curved design the glove fits the handperfectly, and also has a flexible wrist area which reduces friction. With welted seams, kevlar stitching & reinforced thumb, the glove is very strong and offers a very high level of protection to the wearer.

ESAB Curved MIG L 0700 005 043ESAB Curved MIG XL 0700 005 040

ESAB Curved MIG Glove

A heavy-duty 1.3mm welding glove made of selected cow-split leatherwith a lining that is both comfortable and protective. Wing thumb isangled for high comfort and dexterity. Cat. 2.

Heavy Duty Basic 0700 005 007

Heavy Duty Basic

A welding glove made of hard-wearing, heat-resistant cow-split leather,1.3mm thick. Reinforced wing thumb fully welted KEVLAR stitched. CE approved. Cat. 2.

Heavy Duty Regular 0700 005 008

Heavy Duty Regular

A welding glove made of black, strong cow-grain leather. High dexteritywith KEVLAR stitching ensures that the glove can resist hard mechanicalstress. Fully welted, CE approved. Cat. 2.

Heavy Duty Black 0467 222 007

Heavy Duty Black

A welding glove made of cow-split and grain leather with a padded back to withstand high reflective heat. The threefold KEVLAR seamensures that the glove can resist hard mechanical stress. The thumb is reinforced. Cat. 2.

Heavy duty EXL L 0700 005 009Heavy duty EXL XL 0700 005 029

Heavy Duty EXL

Welding glove with two layers of cowhide capable of withstandingextreme heat. Suitable for tubular wire welding. The facing of aluminium-coated PFR rayon reflects 95% of the thermal radiation. The glove ispadded with COMFOflex and is sewn with fourfold KEVLAR. The thumbis angled for high comfort.

Heavy duty ALU 0700 005 010

Heavy Duty Aluminised

A welding glove made from hard wearing, heat resistant cow split leather.

Superior Weld Gauntlet 0701 415 614

A welding glove made from hard wearing, heat resistant cow split leather.The palm is reinforced to give extra protection and longer life.

Superior Gauntlet Reinforced 0701 415 615

Murex Superior Gauntlets

6564

A basic gauntlet made of selected cow-split leather with a lining that is both comfortable and protective. The wing thumb is angled for high comfort.

Red Gauntlet 0701 380 498

Red Gauntlet

Exclusive TIG-welding glove made of goatskin with seams KEVLARstitched seams. The gun cut straight thumb makes it easy to gripdifferent objects. The leather cuff is 13cm long and the absence of anindex finger seam increases the flexibility. The dexterity is extremelygood. Fully welted. Cat. 2.

TIG SuperSoft 0700 005 006

TIG SuperSoft

A quality TIG gauntlet with a reinforced thumb and 13cm long leather cuff.The palm is fully lined for increased comfort and protection. Cat. 2.

TIG Professional 0701 415 963

TIG Professional

A thin pig-split welding glove suitable for TIG applications. It has a 13cmleather cuff and a reinforced thumb for good grip. The absence of anindex finger seam increases flexibility. Fully welted. Cat. 2.

TIG Soft 0700 005 005

TIG Soft

These superior new welding gloves from ESAB offer a whole newapproach to fit, form and function. Ergonomicaly designed to fit thenatural curve of the hand, offering increased quality & comfort to thewearer. The TIG glove is made from thin high quality leather, withimproved fit for higher dexterity. The glove is highly durable, with weltedseams & kevlar stitching. The glove is also extremely light weight, whichincreases the comfort to the wearer.

ESAB Curved TIG Gauntlet L 0700 005 041ESAB Curved TIG Gauntlet XL 0700 005 042

ESAB Curved TIG Glove

A light weight, traditional TIG gauntlet. Cat.1, simple design.

TIG Basic 0700 653 532

TIG Basic

The hand shield should be used together with a welding gauntlet to giveextra protection against the radiated heat.

Hand shield 0700 010 009

Hand Shield

Welding Gloves Welding Gloves

A hard-wearing work glove made of selected cow-grain leather with a cotton lining for comfort. The rubber-reinforced cuff provides extraprotection and the wing thumb is angled. Cat. 2.

Heavy Duty Worker 0700 005 011

ESAB Heavy Duty Worker

A hard wearing work glove made of cow grain leather with a cottonlining for comfort.

Superior rigger 0701 415 613

Superior Rigger

Welding Gloves TIG and General Handling

All ESAB welding footwear is tested and approved according to EN 345 (safety footwear). Depending on application, footwear should always provide appropriate protection, EN 345 gives the following guidelines:

Safety shoes and boots

Key to symbols:

Safety Basic to EN345 200 joules toe protection

Safety Basic, antistatic and energy absorbing heel

Safety Basic, antistatic, energy absorbing heel and water resistant upper

Safety Basic, antistatic, energy absorbing heel, water resistant upper and steel midsole

Antistatic

Dual Density

Steel Midsole

SB

S1

S2

S3

DD

Offers the comfort of a standard shoe and full protection according to S3.It is easy to ‘slip on’ and the special microfibre soft lining makes it verycomfortable to wear. The shoe is water and oil resistant and the seam isreinforced with rivets for maximum durability. The dual density sole offersa soft upper part with front and back ‘bumpers’ and arch support, whilstthe part in direct contact with the ground offers extremely high slipresistance. The shoe is equipped with shock absorption and the TFsystem to prevent ankle spraining risks, also the sole is heat resistant upto 170°C. They have an elasticated gusset for wide fitting feet withNomex® treads and high slip resistant soles.

ESAB safety shoe, size 6 1/2 (40) 0700 010 182ESAB safety shoe, size 7 (41) 0700 010 183ESAB safety shoe, size 8 (42) 0700 010 184ESAB safety shoe, size 9 (43) 0700 010 185ESAB safety shoe, size 10 (44) 0700 010 186ESAB safety shoe, size 10 1/2 (45) 0700 010 187ESAB safety shoe, size 11 (46) 0700 010 218

ESAB Safety Shoe S3 DD

6766

Safety Footwear Safety Footwear

Safety FootwearOffers protection according to S3, and it prevents weld spatter fromfalling into the shoe. The special microfibre soft lining makes it verycomfortable to wear. The boot is water and oil resistant and the seam isreinforced with rivets for maximum durability. The front is folded andfastened with velcro to give a flat and protected upper. The dual densitysole offers a soft upper part with front and back ‘bumpers’ and archsupport, whilst the part in direct contact with the ground offers extremelyhigh slip resistance. The shoe is equipped with shock absorption and theTF system to prevent ankle spraining risks, also the sole is heat resistantup to 170°C. They have an elasticated gusset for wide fitting feet withNomex® treads and high slip resistant soles.

ESAB ankle boot, size 6 1/2 (40) 0700 010 188ESAB ankle boot, size 7 (41) 0700 010 189ESAB ankle boot, size 8 (42) 0700 010 190ESAB ankle boot, size 9 (43) 0700 010 191ESAB ankle boot, size 10 (44) 0700 010 192ESAB ankle boot, size 10 1/2 (45) 0700 010 193ESAB ankle boot, size 11 (46) 0700 010 219

ESAB Safety Ankle Boot

Offers protection according to S3 and the high upper gives full protection to the shin and prevents weld spatter from falling into theboot. The boot is equipped with leather pull loops at the top, making the boot easy to slip on. The boot is water and oil resistant and theseam is reinforced with rivets for maximum durability. The dual densitysole offers a soft upper part with front and back ‘bumpers’ and archsupport, whilst the part in direct contact with the ground offers extremelyhigh slip resistance. The shoe is equipped with shock absorption and the TF system to prevent ankle spraining risks, also the sole is heatresistant up to 170°C. They have an elasticated gusset for wide fittingfeet with Nomex® treads and high slip resistant soles.

ESAB rigger boot, size 6 1/2 (40) 0700 010 194ESAB rigger boot, size 7 (41) 0700 010 195ESAB rigger boot, size 8 (42) 0700 010 196ESAB rigger boot, size 9 (43) 0700 010 197ESAB rigger boot, size 10 (44) 0700 010 198ESAB rigger boot, size 10 1/2 (45) 0700 010 199ESAB rigger boot, size 11 (46) 0700 010 220

ESAB Safety Rigger Boot

S3 DD

S3 DD

A range of quality tools and accessories for welding,cutting and general engineering applications offering everything from cable connectors to highspecification electrode drying ovens. All our weldingtools and accessories conform to the relevant EUlegislation and standards.

Welding Tools and Accessories The ESAB ankle boot Eco offers an S2 safety level. The boot is closed

with a buckle and the shock absorbing sole offers a good slip resistance.

ESAB ankle boot Eco, 6 1/2 (40) 0700 010 206ESAB ankle boot Eco, size 7 (41) 0700 010 207ESAB ankle boot Eco, size 8 (42) 0700 010 208ESAB ankle boot Eco, size 9 (43) 0700 010 209ESAB ankle boot Eco, size 10 (44) 0700 010 210ESAB ankle boot Eco, size 10 1/2 (45) 0700 010 211ESAB ankle boot Eco, size 11 (46) 0700 010 222

ESAB Ankle Boot Eco S2 DD

The ESAB welding rigger boot Eco offers an S2 safety level. The highupper gives good protection to the shin and stops weld spatter fromfalling into the boot. The shock absorbing sole gives good slip resistance.

ESAB rigger boot Eco, size 6 1/2 (40) 0700 010 212ESAB rigger boot Eco, size 7 (41) 0700 010 213ESAB rigger boot Eco, size 8 (42) 0700 010 214ESAB rigger boot Eco, size 9 (43) 0700 010 215ESAB rigger boot Eco, size 10 (44) 0700 010 216ESAB rigger boot Eco, size 10 1/2 (45) 0700 010 217ESAB rigger boot Eco, size 11 (46) 0700 010 223

ESAB Rigger Boot Eco S2 DD

Offers protection according to S3. The laces, running all the way to thetop, ensure excellent fit and they are protected from weld spatter by aleather flap, fastened by velcro. The boot is water and oil resistant andthe seam is reinforced with rivets for maximum durability. The dualdensity sole offers a soft upper part with front and back ‘bumpers’ andarch support, whilst the part in direct contact with the ground offersextremely high slip resistance. The shoe is equipped with shockabsorption and the TF system to prevent ankle spraining risks, also thesole is heat resistant up to 170°C. They have an elasticated gusset forwide fitting feet with Nomex® treads and high slip resistant soles.

ESAB army boot, size 6 1/2 (40) 0700 010 200ESAB army boot, size 7 (41) 0700 010 201ESAB army boot, size 8 (42) 0700 010 202ESAB army boot, size 9 (43) 0700 010 203ESAB army boot, size 10 (44) 0700 010 204ESAB army boot, size 10 1/2 (45) 0700 010 205ESAB army boot, size 11 (46) 0700 010 221

ESAB Army Boot S3 DD

68

Safety Footwear

ESAB welding cable is of the highest quality and has top-classperformance characteristics. This cable is approved in accordance withinternational standards and it is harmonised <HAR>. The cable isextremely resistant to light, chemicals and mechanical damage and itmaintains its flexibility even when used in a cool environment.

Sectional area 16mm2 sold per 50m coils 0190 429 801Sectional area 25mm2 sold per 50m coils 0262 613 601Sectional area 35mm2 sold per 50m coils 0262 613 602Sectional area 50mm2 sold per 50m coils 0262 613 606Sectional area 70mm2 sold per 50m coils 0262 613 603Sectional area 95mm2 sold per 50m coils 0262 613 604Sectional area 120mm2 sold per 25m coils 0262 613 605

50mm Hammer Lug Pk 3 0701 380 04995mm Hammer Lug Pk 3 0701 380 050

Welding Cable, <HAR> H01N2-D

A new generation of CE-approved, fully insulated cable connections with neoprene rubber. Bayonet-type connection which locks firmly toprovide safe and effective contact. The cable is fixed into a socket withtwo Allen screws.

OKC male 10-25mm2 ESAB 0160 360 880OKC male 35-50mm2 ESAB 0160 360 881OKC male 70-95mm2 ESAB 0160 360 882OKC male 120mm2 ESAB 0160 360 883OKC female 10-25mm2 ESAB 0160 361 880OKC female 35-50mm2 ESAB 0160 361 881OKC female 70-95mm2 ESAB 0160 361 882OKC female 120mm2 ESAB 0160 361 883OKC male 10-25mm Murex (Red) 0701 416 257OKC male 25-50mm Murex (Red) 0701 416 258OKC male 50-95mm Murex (Red) 0701 416 259OKC female 10-25mm Murex (Red) 0701 416 254OKC female 25-50mm Murex (Red) 0701 416 255OKC female 50-95mm Murex (Red) 0701 416 256OKC Adapter 25-50mm 0590 046 800

OKC Cable Connection

Fully insulated with neoprene rubber. Sturdy and robust with low contact resistance. The cable is fixed into a socket with two Allenscrews. The two halves of the connection in a ZBK connection areidentical and can therefore be interchanged in any order.

ZBK 25-35mm2 0265 902 482ZBK 50-70mm2 0265 902 481ZBK 95-120mm2 0265 902 480

ZBK Cable Connection

The contacts should be mounted on the front panel of the machine and come in three dimensions. The angle connection is supplied as OKC 50-95 male and female.

OKC machine contact for OKC 25 0160 362 880OKC machine contact for OKC 50/95 0160 362 881OKC machine contact for OKC 120 0160 362 882Type 1 Angle connection, 1 male, 2 female 0365 557 001Type 2 Angle connection, 2 male, 1 female 0365 558 001

OKC Machine Contacts & Angle Connection

These heavy-duty connectors feature the cone and bush design of cableconnection. They have high quality black rubber boots with positive lock and seal. They will accept up to 70mm2 copper or aluminium cable.

CC17 Plug 0700 606 402CC18 Socket 0700 606 403

CC17/18 Connectors

ESAB’s CE-approved screw-type electrode holder offers many advantages including:Excellent current transfer between electrode and holderTwo hole positions at 45 and 90 for welding in different positionsElectrode cable held in place by two Allen screwsAll electrode holders are fully insulated to provide maximum safety

ESAB 200, 200 A (35%) 0333 249 001ESAB 400, 400 A (35%) 0369 849 880ESAB 500, 500 A (35%) 0369 850 880

Electrode Holder ESAB 200, 400 and 500

A closed head electrode holder allowing the electrode to be fitted eitherhorizontally or vertically. The electrode holder is made of glassfibre-reinforced plastic. All Optimus electrode holders are fully insulated.

Optimus 300, 400 A (35%) 0760 001 300Optimus 400, 500 A (35%) 0760 001 400Optimus 600, 600 A (35%) 0760 001 600

Electrode Holder Optimus

7170

Cables & Connectors Connectors & Electrode Holders

Electrode Holders

7372

An open head electrode holder, the Samson is the ‘classic’ electrodetong design of electrode holder, made of a glassfibre-reinforced plastic.All Samson electrode holders are fully insulated.

Samson 300, 300 A (60%) 0760 002 300Samson 400, 400 A (60%) 0760 002 400Samson 500, 500 A (60%) 0760 002 500

Electrode Holder Samson

A ‘screw type’ electrode holder with a fully insulated head and handle.

Handy 200, 200 A (35%) 0700 006 003Handy 300, 300 A (35%) 0700 006 016Handy 400, 400 A (35%) 0700 006 013

Eco Holder Handy

An open head electrode holder with a fully insulated head and handle.

Confort 200, 200 A (35%) 0700 006 004Confort 300, 300 A (35%) 0700 006 005Confort 400, 400 A (35%) 0700 006 015

Eco Holder Confort

A closed head electrode holder with a fully insulated head and handle.

Prima 200, 200 A (35%) 0700 006 006Prima 300, 300 A (35%) 0700 006 007Prima 400, 400 A (35%) 0700 006 014

Eco Holder Prima

This is a crocodile style electrode holder, which is made from blackphenolic resin insulated jaws and black handle. The holder is fullyinsulated for extra safety and copper jaws for good contact.

400A Handicool Electrode Holder 0700 605 376600A Handicool Electrode Holder 0700 605 378

Murex Handicool

This is a twist grip, short stub electrode holder. All the electrode isavailable for use and the angle allows the hand to remain away from the weld pool. The handle is used to apply torque to the electrode clamp in the head.

Econ 405 Electrode Holder 0701 380 433Econ 605 Electrode Holder 0701 380 434

Murex Econ

The MK 150 is a fully galvanised earth clamp with a maximum openingof 50mm. The MP 200, MP 300 and MP 450 are robust earth clampswith strong gripping power for good contact. The maximum opening for the MP 200 is 50mm and 55mm and 60mm for the MP 300 and MP 450 respectively.

MK 150, 150 A (35%) 0682 103 801MP 200, 200 A (35%) 0367 558 880MP 300, 300 A (35%) 0682 103 803MP 450, 450 A (35%) 0000 419 450

MK 150, MP 200, MP 300 and MP450

The EG 600 is an extremely robust earth clamp made of brass. The weldingcable is attached using a hexagonal socket screw and the clamp has amaximum opening of 50mm and a maximum capacity of 600 amperes. The JK3 is a C-clamp model, galvanised and with a maximum openingof 48mm and maximum capacity of 500 amperes.

EG 600, 600 A (35%) 0160 288 001JK3, 500 A (35%) 0000 103 588

Return Clamp EG 600 and JK3

Electrode Holders Electrode Holders & Clamps

Return Clamps

An earth clamp that provides good contact with the work piece and isavailable in two sizes.

Eco clamp 250, 250 A (35%) 0700 006 001Eco clamp 400, 400 A (35%) 0700 006 002

Eco Clamps

This clamp is robustly constructed from substantial castings. The screwlever allows maximum compression to the workpiece. Suitable for up to 600 amps.

CC11 Screw Type Earth Clamp 0701 400 000

Return Clamp CC11

Magnetic earth clamps with strong gripping power that permitsattachment to any ferrous object. These clamps provide a large contactarea with less overheating thanks to fewer junctions.

Magnetic earth clamp 400 A (35%) 0000 500 415

Magnetic earth clamp 600 A (35%) 0000 500 416

Magnetic Earth Clamps

A good connection to the workpiece is needed to obtain optimal manual or automatic welding. For rotating workpieces, an earth connection with arotatable earth coupling is the safest choice. A range of current couplingsis available. To attach the coupling to the workpiece, special clamps areavailable. (Please see: Return clamps for rotating workpieces).

NKK 400 - max 400 A, (1.65kg) 0000 595 133NKK 600 - max 600 A, (2.2kg) 0700 004 007NKK 800 - max 800 A, (2.7kg) 0700 004 001NKK 1200 - max 1200 A, (4.0kg) 0700 004 002NKK 2000 - max 2000 A, (7.3kg) 0700 004 003

Rotatable Earth Couplings

The earth clamps K2 or PZ3 can be mounted directly on to the rotatableearth coupling to create a good contact between the work piece and the return cable. The return clamps can also be used together with theGA 800 to form a complete earth clamp that can handle high currentwelding on non-rotating work pieces.

GA 800 - handle connection for K2 0700 004 005

K2 - clamp head for NKK 800 or 1200 0700 004 004

PZ3 - pole clamp for NKK 2000 0700 004 006

Return Clamps for Rotating Workpieces

7574

ClampsCouplings & Clamps for Rotating Workpieces

The ESAB Eco-Tech is a high performing anti spatter spray, which iscompletely safe, both for the welder and environment. The propellant iscompressed air, hence it is completely none-combustible. The solventfree liquid should be applied in a thin layer before welding. The Eco-Techis water based and does not contain anything that can interfere withpainting, galvanising or any other after treatments.

ESAB Eco-Tech anti spatter 300 ml 0700 013 007ESAB Eco-Tech anti spatter 10 litre 0700 013 008ESAB Eco-Tech anti spatter 25 litre 0700 013 009Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB Eco-Tech Anti Spatter

Combines uncompromising efficiency with active environmental andhealth protection. The High-Tech spray effectively prevents spatter fromsticking on the work piece. The High-Tech weld-protect air-spray isabsolutely non-combustible, has no toxic classification, uses no harmfulgases and is safe for the skin. The propellant is compressed air, it issolvent free and gives no indirect air pollution or contribution to thegreenhouse effect. It is absolutely silicon-free and water-soluble.

High-Tech 400 ml 0760 025 500High-Tech 10 litre 0760 025 010High-Tech 25 litre 0760 025 025Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB High-Tech Anti Spatter

The ESAB Pre-Weld fluid is so much more than a traditional anti spatter.ESAB have managed to develop a product that has a much higherconcentration of the active substance than any other product available. The product does not evaporate off the work piece, it gives extraordinaryprotection all the way from the very edge of the weld and out across the work piece. But still the product is completely safe, no dangerous/harmful substances are included. The fluid is absolutely silicon free andwater-soluble, there are no problems with painting or with any other aftertreatments. The spray can contains 600 ml of active fluid, no solvents.The fluid is kept in an aluminium bag inside the can. The pressuresurrounding the bag forces the fluid out when the valve is opened. This allows the can to be sprayed at any angle and still allows you to get every drop of fluid from the can. Note that it is only active fluid that is released, this is what makes the product so efficient.

ESAB Pre-Weld anti spatter 600 ml 0700 013 013ESAB Pre-Weld anti spatter 10 litre 0700 013 014ESAB Pre-Weld anti spatter 25 litre 0700 013 015Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB Pre-Weld Anti Spatter

The ESAB Jig and Tool protection prolongs the lifetime of the weldingshroud and contact tip as well as giving an extremely good protection totools and jigs. The spray dries quickly and leaves a heat resistant layer(1300ºC) and it does not burn off. Hardly any spatter sticks to thesurface and if it does, a gentle wipe with the glove will remove it.

ESAB Jig and Tool protection, 400 ml 0700 013 016

ESAB Jig and Tool Protection

The ESAB Spatter shield prolongs the lifetime of the welding shroud and contact tip. Apply the fluid by dipping the torch and let the fluid dry.The fluid creates a heat resistant layer that prevents spatter fromsticking. The spatter shield should be applied 2-3 times per 8-hour shiftto give protection. Unlike tip dip products, when using the ESAB spattershield you will NOT experience any problems with porosity created bydrops of anti spatter falling down into the weld.

ESAB Spatter shield, 250 ml 0700 013 017

ESAB Spatter Shield

7776

Anti Spatter Chemical Sundries & Indicators

Prevents spatter from sticking as it forms a heat-resistant coat. The hotgas nozzle on the welding torch should be dipped about 20-25mm intothe paste for effective results. Odourless and contains no solvents,silicone or abrasive agents and is delivered in a 0.5kg metal can.

Clean Weld welding paste, net weight 0.5kg 0365 560 001

Clean Weld Welding Paste

The ESAB NDT testing should be used to identify cracks in a weld. The process consists of 6 steps and to perform the test a cleaner, apenetrant and a developer is required. The procedure should be as follows: 1. Use ESAB cleaner and wipe dry. 2. Spray ESAB Penetrant, leave for 15 min. 3. Wipe away the penetrant from the surface. 4. Use the cleaner in a dry cloth, wiping in one direction only. Wipe dry. 5. Shake and then spray on the developer, leave for 10 min then

see results. 6. Remove the developer and dye using the cleaner.

ESAB NDT Penetrant 300 ml Aerosol 0700 013 018ESAB NDT Developer 400 ml Aerosol 0700 013 019ESAB NDT Cleaner 300 ml Aerosol 0700 013 020

Non Destructive Testing Aerosols

The ESAB gas leak detector can be used on the gas hoses leading fromthe gas cylinders or on the regulators in order to detect a gas leakage.The product is sprayed on and in case of a leakage the liquid will createbubbles. The composition does NOT contain any aggressive substances.

ESAB Leak Detector Pistol Type, 500 ml 0700 013 021

ESAB Leak Detector

The ESAB mask spray should be applied to the cover lenses in a helmetto keep them mist free and clean. 300 ml.

Mask spray, 300 ml 0700 013 026

ESAB Mask Spray

ESAB’s UV skin-protection cream protects the parts of the body that areexposed to UV rays during welding or welding inspections. This cream isalso water-resistant. Sunshade factor 19.

Protective cream, 100 ml 0349 501 033

Protective UV-Cream

The ESAB weld marker marks all metal, wood, plastic, glass and hardsurfaces. Low chloride colour makes it safe for marking stainless steel.Do not roll tube. Dries in five minutes.

Weld marker, white 0700 013 003Metal marker, yellow 0701 415 418

Weld Marker

The weld marker kit consists of three differently coloured pens, red,green and black. The pens can be used on most types of material.

Weld marker kit 0700 013 004

Weld Marker Kit

7978

Chemical Sundries & Indicators

This high impact speed chipping hammer produces virtually no vibrationin the hand as a result of a built-in balance system, which absorbs recoil and counteracts shaking. A range of chisels are available for theHCB, they all have a tungsten-carbide tip and offer a long service life.Narrow chisel: 15mm wide for normal de-slagging and cleaning. Widechisel: 35mm wide for removing spatter and de-burring after gas cutting.

Chipping hammer HCB 0193 305 001

Pneumatic Chipping Hammer HCB

1 Nut HCB 0156 626 0012 Front Housing HCB 0193 306 0044 Inpact Piston Compl. 0156 626 0047 Housing HCB 0156 626 0078 Spring HCB 0156 626 00810 Air Feed Valve 0193 306 01211 O-Ring HCB 0156 626 00912 Ring Valve HCB 0156 626 01013 O-Ring HCB 0156 626 01114 Locking Ring HCB 0156 626 01215 Balancing Piston HCB 0156 626 01316 Housing HCB 0156 626 01417 O-Ring HCB 0193 306 01418 Tube Compl HCB 0156 626 01519 Trigger HCB 0156 626 01620 Spring HCB 0156 626 01721 O-Ring HCB 0156 626 01823 O-Ring HCB 0156 626 01924 Valve Piston 0156 626 02025 O-Ring HCB 0156 626 021

26 Ball Retainer 0156 626 02227 Cover HCB 0156 626 02328 Washer HCB 0156 626 02429 Securing Ring HCB 0156 626 02531 Nipple HCB 0156 626 02732 Sleeve HCB 0156 626 02833 O-Ring HCB 0156 626 02935 Valveball HCB 0156 626 03136 Screw HCB 0156 626 03237, 30 Spring HCB 0156 626 02638 O-Ring HCB 0156 626 03339 Chisel 15 x 100mm 0156 627 00139 Chisel 35 x 100mm 0156 627 00239 Chisel 15 x 200mm 0156 627 00639 Chisel 15 x 300mm 0156 627 00740 Clamp Ring HCB 0156 626 03441 Sound-damping chisel 0156 627 004* Chisel extension 0156 627 005* Stopscrew HCB 0156 626 030

Spares for Pneumatic Chipping Hammer HCB (Fig 18)

Spares for Pneumatic Chipping Hammer HCB Fig 18

* Not shown

Chipping Hammers

The SH2 chipping hammer is made of special high-quality steel, and hasa user-friendly handle. The SH3 is a small hammer with a chisel and tipand steel handle with a plastic grip.

Chipping hammer SH2 0000 663 000Chipping hammer SH3 0683 200 001

Chipping Hammer SH2 and SH3

High quality tempered head and wooden handle. Chisel and point ends.

Martellina wood 0000 915 051Wooden Chipping Hammer TH/5 0701 380 106

Wooden Chipping Hammers

To measure the A dimension of fillet welds. Two measurement areas: max. 7mm and max. 15mm. Complete with a leather pocket.

Fillet gauge KL-1 laser 0000 139 931

Fillet Gauge KL-1 laser

To measure the A dimension of a fillet welds, the leg (small side of aright-angled triangle) and weld reinforcement height. Complete withleather pocket.

Fillet gauge KL-2 laser 0000 139 932

Fillet Gauge KL-2 Laser

8180

Chipping Hammers & Fillet Gauges

To measure the a-dimension on measurement area 3-11mm, K-dimension and 50° and 60° groove angle. Also on fast measurement 4, 5, 6 and 7mm a-dimension and gaps of 1.5, 2 and 3.5mm.

Filarc Fillet gauge 0000 593 268

Filarc Fillet Gauge

To measure the a-dimension of fillet welds and to measure the buttedjoint weld reinforcement height. Equipped with three scales.Measurement area 0-15mm and measurement sharpness +0,1mm.

INOX Fillet gauge 0000 593 720

INOX Fillet Gauge

Pliers specially designed for MIG/MAG welding. Removes spatter from the nozzle, cuts the wire and the tool makes it easy to remove the contact tip and gas shroud.

Universal Tool 0000 134 716Universal Tool Mini 0000 139 054

Universal Tool

Fast effective cutting of welding wire and removal of burnt wire.Removes spatter from gas and contact nozzle and can be used forattaching and removing of contact, intermediate and gas nozzles.

Fix 1 12-15mm 0760 022 100Fix 2 15-18mm 0760 022 200

Fix Pliers

Stainless steel inspection mirror for inspecting welds.

Inspection mirror 500mm, with magnetic base 0000 595 319

Inspection Mirrors

Fillet Gauges & Small Tools

The MIG/MAG gun holder is a simple and practical device for theconvenient holding of the MIG/MAG gun when not in use. It is equippedwith a magnetic foot for stability and is suitable for use with mostMIG/MAG welding guns.

MIG/MAG gun holder 0760 022 300

MIG/MAG Gun Holder

The TIG torch holder is a simple and practical device for the convenientholding of the TIG torch when not in use. It is equipped with a magneticfoot for stability and is suitable for use with most TIG torches.

TIG torch holder 0760 022 400

TIG Torch Holder

The powerful magnets keep the work piece in place when welding orsoldering plates together at angles. The large model can support weights up to 80kg whilst the small one can support up to 45kg.

Magnetic position holder small 0700 014 015Magnetic position holder large 0700 014 016

Magnetic Position Holders

8382

Small Tools

Prolongs the life of welding and cutting nozzles. Murex nozzle cleanerdoes not file the nozzle bore. Each set contains a range of nozzlecleaners from 0.46mm to 1.74mm.

Nozzle Cleaner Set 0700 153 391

Murex Nozzle Cleaner Set

For use with Murex gas equipment. Fits kennedy nut, hose nut and cylinder valve.

Combination Spanner 0701 414 766

Murex Combination Spanner

Provides the correct leverage for opening cylinder valves.

Spindle Key K5 0701 380 120

Murex Spindle Key

A standard cup type sparklighter.

SL3 Cup Sparklighter 0701 380 220SL3 Flints Pk 5 0701 380 221

Murex SL3 Cup Sparklighter

A pistol type sparklighter.

SL2 Sparklighter Pistol 0700 154 807Flints Pk9 (SL2) 0700 119 695

Murex SL2 Sparklighter Pistol

Lightweight, easy-to-use steel brushes with wooden handles. Availablewith two, three or four rows of bristles.

Two-row mild steel brush 0760 024 100Three-row mild steel brush 0760 024 200Murex three-row mild steel brush converging 0700 158 228Four-row mild steel brush 0760 024 300Two-row stainless steel brush 0760 024 500Three-row stainless steel brush 0760 024 600Murex three-row stainless steel brush converging 0700 158 231Four-row stainless steel brush 0760 024 700

Wire Brushes

Small Tools

84

Cylinder Trolleys

Takes one oxygen and one Acetylene cylinder.

TR3 Trolley 0700 123 772

TR3 Trolley

Takes one oxygen and one Propane cylinder.

Oxy/Propane Trolley 0700 151 549

Oxy/Propane Trolley

Takes one standard cylinder.

Universal Single Trolley 0700 153 384

Universal Single Trolley

All cylinder trolleys have a hardwearing red epoxy coated finish and chains to hold the cylinderupright. Large rugged wheels mean the trolley can be wheeled over the roughest ground.

Cylinder Trolleys

Completing the extensive accessory portfolio fromESAB is our Special Process Equipment range,which includes tungsten grinders, gouging torchesand fume extraction units. As with all our products our Special Process Equipment range conforms toall relevant EU legislation and standards.

Special ProcessEquipment

8786

The PK 1 is a light and handy dry-storage container for electrodes. It iseasy to carry and has a storage temperature of around 100ºC. The heatingelement runs from the top to the bottom and the top is fully insulated.

Capacity 9kgStorage temp. (°C) 100Drying temp. (°C) N/AVoltage (V) 24/42/110/230Output (kW) 0,1Outer dimension (Ø/height, mm) 225/610Inner dimension (Ø/height, mm) 100/470Weight (kg) 6

PK 1, 24 V 0000 515 063PK 1, 42 V 0000 515 052PK 1, 110 V 0000 515 062PK 1, 230 V 0000 515 064

PK 1 Dry-Storage Container

The PK 5 is a combined drying and dry-storage system for most typesof electrodes. The drying time at full effect is 1-7 hours depending on thetype of electrode. The temperature is thermostatically controlled andranges from 50-300°C. The electrodes should be stored in the PK 5without packaging. The heating element runs from the top to the bottomand the top is fully insulated.

Capacity 24kgStorage temp. (°C) 70-300Drying temp. (°C) N/AVoltage (V) 110/230Output (kW) 0,5Outer dimension (Ø/height, mm) 345/660Inner dimension (Ø/height, mm) 116/460Weight (kg) 13

PK 5 drying equipment, 110 V 0700 011 070PK 5 drying equipment, 230 V 0000 515 075

PK 5 Drying Equipment

The SK 40 is a dry-storage cabinet with 4 removable shelves for storing electrodes. The electrodes should be stored without packing.The cabinet is equipped with a thermometer, thermostat and controllamp. Temperature range 50-180°C.

Capacity 120kgStorage temp. (°C) 50-180Drying temp. (°C) N/AVoltage (V) 230Output (kW) 0,7Outer dimension (WxDxH, mm) 530 x 640 x 750Inner dimension (WxDxH, mm) 470 x 510 x 520Weight (kg) 55

SK 40 dry-storage cabinet, 230 V 0000 515 102

SK 40 Dry-Storage Cabinet

ESAB Drying Equipment ESAB Drying Equipment

The PK 40 is a robust cabinet for the drying and dry storage ofelectrodes, with space for 10 packs. The drying time is set manually atbetween 50 and 350°C. Dimensions 570 x 620 x 790mm. Weight 70kg.

Capacity 72kgDrying temp. (°C) 50-350Voltage (V) 230Output (kW) 1,5Outer dimension (WxDxH, mm) 570 x 620 x 790Inner dimension (WxDxH, mm) 460 x 510 x 520Weight (kg) 70

PK 40 drying cabinet, 230 V 0000 515 105

PK 40 Drying Cabinet

The PK 410 is a robust cabinet for the drying and dry storage ofelectrodes. The drying temperature can be regulated between 50 and400°C (450°C, 3-phase). The dry-storage temperature is around 150ºC.The PK 410 is equipped with a control lamp, electronic thermometer andelectronic thermostat. The PK 410 also has a 7-day timer. This timermakes it possible to change automatically from drying to dry storage atselected times and temperature ranges.

230VCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 230Output (kW) 3,5Outer dimension (WxDxH, mm) 860 x 760 x 1280Inner dimension (WxDxH, mm) 655 x 485 x 635Weight (kg) 230

400VCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 400-3Output (kW) 4,5Outer dimension (WxDxH, mm) 860 x 760 x 1280Inner dimension (WxDxH, mm) 665 x 485 x 635Weight (kg) 230

PK 410 drying cabinet, 230 V, 1-phase 0000 515 103PK 410 drying cabinet, 400 V, 3-phase 0000 515 108

PK 410 Drying Cabinet

The JS 200 is a storage silo for welding powder (flux). The JS 200 keeps the flux dry and clean and also makes it extremely easy to handle theflux. The temperature can be adjusted between 100 and 300°C.

Capacity 200 LtStorage temp. (°C) 100-300Drying temp. (°C) N/AVoltage (V) 230Output (kW) 2Outer dimension (WxDxH, mm) 510 x 570 x 1755Weight (kg) 110

JS 200 storage silo 0000 515 090

JS 200 Storage Silo

The JK 50 is a container for drying and storing welding powder (flux).The JK 50 dries 50 litre flux at a maximum temperature of 500°C inaround three hours. After drying, the temperature falls automatically tothe pre-set dry storage temperature (150°C) within 12 hours.

Capacity 50 LtStorage temp. (°C) 50-250Drying temp. (°C) 50-500Voltage (V) 400-3Output (kW) 3,7Outer dimension (Ø/height, mm) 860/1600Weight (kg) 190

JK 50, 400 V, 3-phase 0000 515 091

JK 50 Powder Drier

8988

ESAB Drying Equipment Murex Drying Equipment

Heated Quivers are designed for use on installations with 100 volt or 240 volt supply. The quiver will maintain an even temperature of 100°C dependant on the amount of electrodes stored. Complete withhandle/stand.

Supply 110v or 110/240v. AC 50/60HzLoad 150 wattsOverall dimensions (WxDxH, mm) 120 x 500 x 110Weight Empty 3 KiloCapacity 9kg of Welding Electrodes

Heated Quiver 110 V 0701 380 485Heated Quiver 110/240V 0701 380 486Insulated Heated Quiver 240v 0701 502 358

Quivers

This oven is designed for rugged site conditions, where it can be used aseither a holding or storage oven.

Temperature range 100-300°C thermostatically controlledSupply 110.240v. (Dual voltage)Load 300 wattsOverall dimensions (WxDxH, mm) 175 x 610 x 210Internal dimensions (WxDxH, mm) 115 x 480 x 150Weight Empty 10 KiloCapacity 13kg of Welding Electrodes

Portable Drying Oven – Dual Voltage 0701 380 083

Portable Drying Oven – Dual Voltage

These ovens can be used as the sole means of drying or as theintermediary, until transferred to a portable oven or a quiver.

Temperature range 100-300°C thermostatically controlledSupply 110v or 250v AC. 50/60HzLoad 1500 wattsOverall dimensions (WxDxH, mm 520 x 620 x 610Internal dimensions (WxDxH, mm) 455 x 470 x 455Weight Empty 42 KiloCapacity 136kg of Welding Electrodes

Stationary Drying Oven 250V AC 0700 655 258Stationary Drying Oven 110V AC 0700 655 259

Stationary Drying Oven

9190

The robust, high temperature oven has a digital display. It has accurate temperature control from 0 – 500ºC. Visual temperature indication is by the digital display. Temperature settings are digitally set.

Temperature range 0-500°C thermostatically controlledSupply 110 or 240v Load 3 KwOuter dimensions (WxDxH, mm 600 x 685 x 760Internal dimensions (WxDxH, mm) 470 x 480 x 470Weight Empty 75kgCapacity 136kg of Welding ElectrodesDigital Display YES

High Temp Oven – Digital Display 0701 380 408

As above but with Chart Recorder

Storage Temperature 0-500°CHold Cycle 1 YESBaking Temperature 0-500°C Hold Cycle 2 YESSupply 110 or 240v Load 3 KwDelay Timer 7-Day ProgrammableChart Recorder OptionalOuter dimensions (WxDxH, mm 600 x 685 x 760Internal dimensions (WxDxH, mm) 470 x 480 x 470Weight Empty 75kgCapacity 136kg of Welding ElectrodesDigital Display YES

High Temp Oven – CR DD Timer 0701 380 410

High Temperature Ovens

As the Stationary Oven, but with a digital display.

Temperature range 0-300°C thermostatically controlledSupply 110/240v. (Dual voltage)Load 1500 wattsOverall dimensions (WxDxH, mm 530 x 620 x 620Internal dimensions (WxDxH, mm) 465 x 480 x 465Weight Empty 45kgCapacity 136kg of Welding ElectrodesDigital Display YES

Stationary Oven Digital 250V AC 0701 502 381

Stationary Drying Oven Digital

Heating Element, Top 0700 011 071 Heating Element, Bottom 0700 011 072

Thermostat 0700 011 073 Contactor 0700 011 074

Spare Parts for ESAB PK40

EMC-Filter 0700 011 039Heating Element, Top 0700 011 040 Heating Element, Bottom 0700 011 041 Signal Lamp Green Big 0700 011 042 Signal Lamp Red Big 0700 011 043Signal Lamp Red, Small 0700 011 044

Controller 0700 011 045 Sensor 0700 011 046 Timer 0700 011 047 Contactor 0700 011 048 Main Switch 0700 011 049 Auto-Manual Switch 0700 011 050


Heating Element 0700 011 030 Signal Lamp 0700 011 031

Thermostat 0700 011 032Thermometer 0700 011 033

Spare Parts for ESAB JS200

Heating Element 24V 0700 011 001Heating Element 42V 0700 011 002 Heating Element 110V 0700 011 003 Heating Element 230V 0700 011 004 Signal Lamp 24V 0700 011 005Signal Lamp 42V 0700 011 006

Signal Lamp 110V 0700 011 007 Signal Lamp 230V 0700 011 008 Hinged Lid 0700 011 010 Knob 0700 011 011 Handle 0700 011 012


Heating Element 0700 011 015 Signal Lamp 0700 011 016

Thermostat 0700 011 017 Thermometer 0700 011 018


Heating Element 0700 011 020Signal Lamp Red 0700 011 021 Signal Lamp Green 0700 011 022

Thermostat 0700 011 023 Thermometer 0700 011 024

Spare Parts for ESAB SK40

Alternative Drying Ovens Spare Parts

Element Stat Oven 240v Pk 2 0701 380 149Element 110V (Quiver) 0701 380 487Toggle Switch (Quiver) 0701 380 488

Element 240V Kit (Portable Oven) 0701 411 237Thermostat 110/240V (Ovens) 0701 411 240

Spare Parts for Murex Drying Equipment

Heating element 0700 011 082

Spare Parts for JK50

The G-Tech Handy is an easy to use tungsten electrode grinder. Thegrinding angle can be adjusted easily, using just one hand. The G-TechHandy grinds electrodes with dimensions of 1.0 to 4.0mm and it isequipped with a dust filter. The speed (rpm) can be adjusted and the unitweighs just 2.8kg. The G-Tech Handy is delivered in a durable hard casethat makes it easy to transport.

G-Tech Handy, 230 V, 50 Hz 0700 009 883

G-Tech Handy

1 Motor 230 V 0700 009 0412 ON/Off switch 0700 009 0423 Carbon brush 0700 009 0444 Grinding head 0700 009 0455 Spindle for diamond disc 0700 009 0466 Grinding chamber 0700 009 0477 Guide for electrode holder 0700 009 0488 Allen key 0700 009 0499 Allen screw 0700 009 050

10 Spring 0700 009 05611 Grinding position selector 0700 009 05112 Screw 0700 009 05213 Filter housing 0700 009 05314 Filter cover 0700 009 05415 Allen key to fit the filter cover 0700 009 05516 Rubber seal big 0700 009 05717 Screw to fit filter cassette 0700 009 05818 Screw to fit diamond disc 0700 009 05919 Rubber seal small 0700 009 06020 Filter cassette 0700 009 02921 Diamond disc 0700 009 02822 Inspection glass 0700 009 03723 Electrode holder 0700 009 03024 Collet body 1,0mm 0700 009 03424 Collet body 1,6mm 0700 009 03124 Collet body 2,0mm 0700 009 03524 Collet body 2,4mm 0700 009 03224 Collet body 3,2mm 0700 009 03324 Collet body 4,0mm 0700 009 036

Case for the machine 0700 009 061(not shown)

Spares for G-Tech Handy (Fig 20)

SPARES FOR G-TECH HANDY Fig 20

The G-Tech Handy II is a portable enclosed Tungsten Electrode grinder,which is easy to operate. The Tungsten electrode can be ground withoutusing a holder or tool. The grinding head can be adjusted in threedifferent positions: 0, 1 and 2. In each position another part of thegrinding disc will be used, and both sides of the disc can be utilised,giving extended use and reduced cost.

The G-Tech Handy II features a multifunctional cover, which allows theelectrode to be ground in a 90º angle. The machine is prepared for fixingto a table using the accessories included.

The G-Tech Handy II is delivered complete for grinding of tungstenelectrodes in the dimension of 1,6 – 2,0 - 2,4 - 3,2 mm. A head for grindingof 1,0 – 4,0 – 4,8 – 6,0 mm electrodes can be supplied as an option.

The G-Tech Handy II features:Ergonomic Design & LightweightAdjustable Grinding Angles (20º - 60º)Double Sided Grinding Disc – Coated with Diamante PowderAllows Exact Repetition of Longitudinal GrindingCan be Connected to a Vacuum Cleaner Option: Orbital-Set for Grinding of Short Tungsten-Electrodes with alength up to 15mm Max

G-Tech Handy II Complete 240V/50Hz 0700 009 886G-Tech Handy II complete US version with 120V/50Hz 0700 009 067

G-Tech Handy II

1 Grinding Disc 0700 009 0682 Second Head for Diameters

1, 0/4, 0/4, 8/6, 0mm Red 0700 009 0693 Replacement Head for Diameters

1, 6/2, 0/2, 4/3, 2mm Black 0700 009 0704 Orbital set for Grinding of Short

Tungsten Electrodes 0700 009 0715 Clamp Holder ‘Spannfix’ Size I (85mm) 0700 009 0726 Solid Metal Box ‘ESAB’ 0700 009 073

Spares for G-Tech Handy II (Fig 19)

Spares for G-Tech Handy II Fig 19

9392

Tungsten Grinders Tungsten Grinders

The ESAB G-Tech is a tungsten-electrode grinder with a uniqueenclosed wet-grinding system. A wet grinding system is the mosteffective protection from thoriated tungsten grinding dust. All dust iscollected in the liquid and the risk of oxidation of the electrode isreduced. The grinding angle can be adjusted and the tip can be groundin a 90 degrees angle to make it less pointed. The small table seen inthe picture is not included and is not available from ESAB.

G-Tech 230V, 50Hz 0700 009 880G Tech 115V 50Hz (UK) 0700 009 881Gasket 0700 009 001 Diamond Disc, G-Tech (inc nut) 0700 009 002 Liquid 250 ml 0700 009 004 Return Bottle 250 ml 0700 009 005 Collet Body 1,0mm G-Tech 0700 009 007 Collet Body 1,6mm G-Tech 0700 009 008 Collet Body 2,0mm G-Tech 0700 009 018 Collet Body 2,4mm G-Tech 0700 009 009 Collet Body 3,2mm G-Tech 0700 009 010 Collet Body 4,0mm G-Tech 0700 009 011 Collet Body 4,8mm G-Tech 0700 009 019 T-Piece 0700 009 012 Spacer Piece 0700 009 013 Liquid 5000 ml 0700 009 015 Accessory box complete 0700 009 016 Waste Container 0700 009 017 Accessory box complete 0700 009 020 Inspection Glass 0700 009 037 Kit – Inspection window G-Tech with seal 0700 009 038 Kit – Electrode holder and handle 0700 009 039 Kit – Seal abrasive wheel with seal and ‘O’ ring 0700 009 040

G-Tech and Spares

The TIG PEN allows the welder to control the tip of the filler wire withgreat accuracy even at a long distance from the weld seam and in theprocess helps the welder to obtain a higher quality weld. It alsoeliminates waste of the filler wire. The TIG Pen can be used with any wirediameter from 1.0 to 3.2mm

TIG Pen 0700 009 026

TIG Pen

This is a high-quality range of tungsten electrodes available in thoriated,ceriated, pure and lanthanated (Gold Plus) versions. ESAB tungstenelectrodes have excellent welding and ignition properties. They aredelivered in plastic boxes, each containing ten electrodes. The electrodesare available in 150 and 175mm lengths.

WT20 1,0 x 175mm (Thoriated) Red 0151 574 001WT20 1,6 x 175mm (Thoriated) Red 0151 574 002WT20 2,4 x 175mm (Thoriated) Red 0151 574 003WT20 3,2 x 175mm (Thoriated) Red 0151 574 004WT20 4,0 x 175mm (Thoriated) Red 0151 574 005

W Pure 1,0 x 175mm Green 0151 574 008W Pure 1,6 x 175mm Green 0151 574 009W Pure 2,4 x 175mm Green 0151 574 010W Pure 3,2 x 175mm Green 0151 574 011W Pure 4,0 x 175mm Green 0151 574 012

WC20 1,0 x 175mm (Ceriated) Grey 0151 574 036WC20 1,6 x 175mm (Ceriated) Grey 0151 574 037WC20 2,4 x 175mm (Ceriated) Grey 0151 574 038WC20 3,2 x 175mm (Ceriated) Grey 0151 574 039WC20 4,0 x 175mm (Ceriated) Grey 0151 574 040

WL15 1,0 x 175mm Gold Plus (Lanthanated) Gold 0151 574 050WL15 1,6 x 175mm Gold Plus (Lanthanated) Gold 0151 574 051WL15 2,4 x 175mm Gold Plus (Lanthanated) Gold 0151 574 052WL15 3,2 x 175mm Gold Plus (Lanthanated) Gold 0151 574 053WL15 4,0 x 175mm Gold Plus (Lanthanated) Gold 0151 574 054WL15 4,8 x 175mm Gold Plus (Lanthanated) Gold 0151 574 055

WT20 1,0 x 150mm (Thoriated) Red 0151 574 201WT20 1,6 x 150mm (Thoriated) Red 0151 574 202WT20 2,0 x 150mm (Thoriated) Red 0151 574 244WT20 2,4 x 150mm (Thoriated) Red 0151 574 203WT20 3,2 x 150mm (Thoriated) Red 0151 574 204WT20 4,0 x 150mm (Thoriated) Red 0151 574 205

W Pure 1,0 x 150mm Green 0151 574 208W Pure 1,6 x 150mm Green 0151 574 209W Pure 2,0 x 150mm Green 0151 574 245W Pure 2,4 x 150mm Green 0151 574 210W Pure 3,2 x 150mm Green 0151 574 211W Pure 4,0 x 150mm Green 0151 574 212

WC20 1,0 x 150mm (Ceriated) Grey 0151 574 236WC20 1,6 x 150mm (Ceriated) Grey 0151 574 237WC20 2,0 x 150mm (Ceriated) Grey 0151 574 242WC20 2,4 x 150mm (Ceriated) Grey 0151 574 238WC20 3,2 x 150mm (Ceriated) Grey 0151 574 239WC20 4,0 x 150mm (Ceriated) Grey 0151 574 240

Tungsten Electrodes

9594

Tungsten Grinders & Electrodes Tungsten Electrodes

The arc air gouging torch is supplied with a 2.14m (7’) long cable. Thetorch accepts both round and flat electrodes, ranging in size from 4mm(5/32”) to 13mm (1/2”) round electrodes and 10mm ( 3/8”) and 16mm (5/6”)flat electrodes. The K4000 is rated at 1,000 Amps, it uses compressedair between 5.6 and 7.0kg/cm2 (80 and 100 psi) and between 0.85 and0.99 m3/min (30 and 35 cfm). The torch and cable weigh 2.4kg (5.4lbs).Supplied without connections.

Gouging torch including monocable 0760 018 100 K4000 torch 0760 018 110Mono cable K4000 0760 018 119

1 & 2 Insulator assembly 0760 018 101 3 & 4 Lever assembly 0760 018 103 5 to 8 Valve bonnet assembly 0760 018 106 9 Upper arm 0760 018 112 10 & 11 Nozzle 0760 018 113 12 Body 0760 018 115 13 Hinge pin 0760 018 116 14 Spring 0760 018 117 15 Handle 0760 018 118

Spares for Monocable

‘O’ Ring kit 0760 018 121Clamp kit 0760 018 125Conductor kit 0760 018 126Hose cover 0760 018 130Boot insulator 0768 018 131

K4000 (Fig 21)

Spares for K4000 Fig 21 Spares for Flair 600 Fig 22

1 Set of screws 0468 253 0012 Insulating Caps 0468 253 0023 Brass Lever 0468 253 0034 Injection Nozzle 0160 580 0016 Lever Insulation 0468 253 0067 Spring 0468 253 0078 Hinge Pin 0468 253 0089 Body 0468 253 00510 Valve 0468 253 01015 & 16 Valve Seat 0468 253 00911,12,14 Push Button + Link 0468 253 01413 Handle 0468 253 013

Spares for Flair 600 (Fig 22)

The Flair 600 arc air torch for carbon up to 10mm (3/4”) and 4 x 15mm (5/32 x 9/16”) rectangular. The Flair 1600 arc air torch for carbon up to19mm (3/4”) and 5 x 20mm (3/16 x 3/4”) rectangular.

Flair 600, incl monocable 0468 253 880Torch only 0468 253 016Monocable only 0468 253 015

Flair 1600, incl monocable 0468 253 881Torch only 0468 253 036Monocable only 0468 253 035

Flair 600 and 1600

9796

Gouging Torches Gouging Torches

Spares for Flair 1600 Fig 23

1 Set of screws 0468 253 0012 Insulating Caps 0468 253 0023 Brass Lever 0468 253 0234 Injection Nozzle 0468 253 0246 Lever Insulation 0468 253 0067 Spring 0468 253 0278 Hinge Pin 0468 253 0089 Body 0468 253 02510 Valve 0468 253 01015 & 18 Valve Seat 0468 253 00911,12,14 Push Button + Link 0468 253 01413,16,17 Handle 0468 253 033

Spares for Flair 1600 (Fig 23)

Arc air gouging with carbon electrodes and compressed air is the fastest and cheapest process for cutting/gouging material in conjunctionwith repairs and similar processes. A carbon electrode is used to meltthe material and, at the same time, a powerful jet of air blows away themolten material. The compressed air also cools the carbon electrode.Carbon electrodes can be used for the arc air gouging of unalloyed andlow-alloy steel, stainless steel, cast iron and other metals. A completeset of arc air gouging equipment consists of an arc air gouger, the Flair 600 or Flair 1600, alternatively the K4000 with mono cable. OK Carbon™, ESAB’s focused but comprehensive range of arc aircarbons enables the user to gouge in a wide range of applications,within foundries, steel industry, shipbuilding, steel construction and in maintenance workshops. The OK Carbon™ range gives the user the highest possible efficiency by removal of metal per unit length or unit time.

DC Pointed, 4 x 305mm PK 100 0700 007 002DC Pointed, 5 x 305mm PK 100 0700 007 003DC Pointed, 6,35 x 305mm PK 200 0700 007 004DC Pointed, 8 x 305mm PK 200 0700 007 006DC Pointed, 10 x 305mm PK 100 0700 007 007

DC Pointed, 6,35 x 5,10mm PK 200 0700 007 104DC Pointed, 8 x 510mm PK 150 0700 007 106DC Pointed, 10 x 510mm PK 5 0700 007 107DC Pointed, 13 x 455mm PK 50 0700 007 108

DC Jointed, 10 x 430mm PK 100 0700 007 410DC Jointed, 13 x 430mm PK 50 0700 007 411DC Jointed, 16 x 430mm PK 50 0700 007 412DC Jointed, 19 x 430mm PK 25 0700 007 413

AC Jointed, 4 x 355mm PK 100 0700 007 414AC Jointed, 5 x 355mm PK 50 0700 007 415AC Jointed, 6.35 x 355mm PK 50 0700 007 416AC Jointed, 8 x 355mm PK 50 0700 007 417AC Jointed, 9,5 x 355mm PK 50 0700 007 418

DC Rectangular, 4 x 15 x 305mm PK 125 0114 800 112DC Rectangular, 5 x 15 x 305mm PK 125 0700 007 502DC Rectangular, 5 X 20 X 305mm PK 100 0700 007 503

OK Carbon™

9998

Gouging Torches Gouging Carbons

Fume Extraction Units

The CarryVac 2 P150/P150 AST are two small, lightweight, portableextraction units designed to be carried to the working area. Connectedto a welding torch or to an extraction nozzle, the CarryVac 2 unitsextract the fume directly at source. The polluted air is filtered andcaptured in a hygienically-packed filter. The CarryVac 2 is equipped witha filter indicator, which shows when the filter must be replaced. It is ideal for maintenance welding, low and medium-duty cycle. The filtercapacity is approximately 200kg of solid wire or twelve 15kg spools. The CarryVac 2 P150 AST is equipped with an automatic start/stopfunction, which increases the service life of each filter and of the unit itself.Please also see ESAB Centrovac extraction torch range.

CarryVac 2 P150 220-240V 0700 003 883CarryVac 2 P150 AST 220-240V 0700 003 884CarryVac 2 P150 110-120V 0700 003 885CarryVac 2 P150 AST 110-120V 0700 003 886Motor 220-240V 0468 455 021Motor 110-120V 0468 455 022Hose 45mm, 1.6m 0154 352 015Hose 45mm, 3.5m 0154 352 008Hose 45mm, 5m 0154 352 006Hose 45mm, 15m 0154 352 002Main filter CarryVac 2 0700 003 004Main filter CarryVac (previous model) 0468 455 001Pre filter 0468 455 002PC-board including cables 0700 003 005Carbon brushes 0700 003 010Coarse separator complete 0468 455 014Suction nozzle TM-80, round 80mm 0700 100 080Suction nozzle TM-200, 200mm wide 0700 100 200Suction nozzle PM-300, 300mm wide 0700 100 300Magnet for suction nozzle 0332 010 880

CarryVac 2

100

ESAB Equipment Catalogue 2009 EE607_119052

Documents

standard welding

leaderin welding

welding gloves

welding curtains

welding clothing

welding blankets

benefits of esab quality

quality products