® SPECIFICATION SUBMITTAL Page Job Name: Job Number: Model Numbers: Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller 369-243c 1 05.19.10 Energi Savr Node QS The Energi Savr Node QS unit is a DIN-rail mounted controller for DALI-compliant Digital Addressable loads. It provides DALI bus power and control for two independent DALI Buses with up to 64 ballasts each. The Energi Savr Node QS unit also provides direct connections and power for the following Lutron® devices: • Occupancy sensors • Daylight sensors • IR receivers • QS devices Features • Provides power for either one or two buses of DALI compliant digital addressable loads (up to 250 mA per bus). • Each DALI Bus can control a maximum of 16 zones. • Power failure memory retains control unit program- ming in the event of a power loss. • Default configuration requires no commissioning. • Programming available via the Energi Savr Node QS hand-held device. • Four occupancy sensor inputs for automated control of lights in areas. • Four daylight sensor inputs automatically adjust light levels based on the amount of natural light entering through the windows. • Four IR receiver inputs for personal control. • Add more occupancy sensors, daylight sensors, or IR receivers by connecting QS Sensor Modules (QSMs). • Includes QS control link for seamless integration of lights, motorized window treatments, control sta- tions, and QS Sensor Modules. • Energi Savr Node QS units and QS Sensor Modules can be used in a Quantum® system to control and manage light in an entire building. 500-13431 Rev. B N1771 Z096 LUTRON Energi Savr LUTRON Up to 64 ballasts on each loop QS Control Link DALI Bus 1 DALI Bus 2 Ballast Ballast Energi Savr Node QS Energi Savr Node QS Quantum Panel GRAFIK Eye QS QS Contact Closure Interface seeTouch® QS Wallstation Ballast Ballast IR Receiver Daylight Sensor Occupancy Sensor 220-240 V~ Up to 100 total QS devices Ethernet Programming Link One sensor group shown; connections available for up to four sensor groups. Wireless Communication QSM Radio Powr SavrTM Occupancy Sensor (up to 10 per QSM) Radio Powr Savr Daylight Sensor (up to 10 per QSM) PicoTM Wireless Controller (up to 10 per QSM) Wired Daylight Sensors* Wired Occupancy Sensors* Wired IR Receivers* * Up to 4 wired sensors total (of any type) Note: Multiple QSMs can be added to increase the number of wireless sensors and Pico wireless controllers.
15
Embed
Energi Savr Node QS - Lutron Electronicsclassic.lutron.com/CMS400/uploadedFiles/International_Commercial... · Energi Savr Node TM QS QSNE-2DAL-D ... Energi Savr Node QS unit. Infrared
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
® Specif icat ion Submittal page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 1 05.19.10
Energi Savr Node QSThe Energi Savr Node QS unit is a DIN-rail mounted controller for DALI-compliant Digital Addressable loads. It provides DALI bus power and control for two independent DALI Buses with up to 64 ballasts each. The Energi Savr Node QS unit also provides direct connections and power for the following Lutron® devices:
•Energi Savr Node QS units andQSSensorModulescan be used in a Quantum®systemtocontrolandmanage light in an entire building.
500-13431 Rev. B
N1771Z096
Energi Savr Node QS
Ballast
seeTouch® QS Wallstation
Ballast
Ballast
Ballast
Quantum Panel
LUTRON
LUTR
ON
R
QS Contact Closure Interface
GRAFIK Eye QSEnergi Savr
Node QS
LUTRON
LUTR
ON
R
Up to 64 ballasts on each loop
QS Control Link
DALIBus1
DALI Bus 2Ballast
Ballast
Energi Savr Node QS
Energi Savr Node QS
Quantum Panel
GRAFIKEyeQS
QS Contact Closure Interface
seeTouch® QS Wallstation
Ballast
Ballast
IR Receiver
DaylightSensor
OccupancySensor
220-240 V~ Upto100total QS devicesEthernet
ProgrammingLink
Onesensorgroupshown; connections
available for up to four sensor groups.
Wireless Communication QSM
RadioPowrSavrTM OccupancySensor(upto10perQSM)
Radio Powr Savr DaylightSensor (upto10perQSM)
PicoTM Wireless Controller (up to10perQSM)
Wired Daylight
Sensors*Wired Occupancy Sensors*
Wired IR Receivers*
*Upto4wiredsensorstotal(ofanytype)
Note:MultipleQSMscanbeadded to increase the number of wireless sensors and Pico wireless controllers.
® Specif icat ion Submittal page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 2 05.19.10
Typical Application: Requires commissioning
OccupancyS
ensorD
aylightS
ensor
Loop 2Loop 1
Versaplex Q
S
LUTRON
Wired to
sensor group 4
Open Offices Corridor Private Offices
OccupancySensor
QS Link
OccupancySensor
OccupancySensor
Energi Savr Node QS
Energi Savr Node QS
DaylightSensor
DALILoop
DALILoop
DALILoop
seeTouch® QS Wallstation
Win
dow
Win
dow
Win
dow
LUTRON OccupancySensor Daylight
Sensor
LUTRON
OccupancySensor Daylight
Sensor
LUTRON
OccupancySensor Daylight
Sensor
LUTRON
seeTouch® QS Wallstation
OccupancySensor
DaylightSensor
LUTRON
DALILoop
DALILoop
DALILoop
QS
Lin
k
QS Link
OpenOffices Corridor PrivateOffices
seeTouch® QS Wallstation
seeTouch® QS Wallstation
QSLink
QSLink
QSLink
Win
dow
Win
dow
Win
dow
DALI Bus
Daylight Sensor
Daylight Sensor
Daylight Sensor
Daylight Sensor
Daylight Sensor
Occupancy Sensor
Energi Savr Node QS
Energi Savr Node QS
Occupancy Sensor
Occupancy Sensor
Occupancy Sensor
Occupancy Sensor
Occupancy Sensor
Occupancy Sensor
DALI Bus
DALI Bus
DALI Bus
DALI Bus
DALI Bus
® Specif icat ion Submittal page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 3 05.19.10
OccupancySensor
OccupancySensor
Loop 2
Wired to sensor group 2
Loop 1
Perimeter Interior
Win
dow
Win
dow
Energi Savr Node QS
Wired to sensor group 1
OccupancySensor
DaylightSensor
Loop 2Loop 1
Perimeter Interior
Win
dow
Win
dow
Energi Savr Node QS
LUTRON
Wired to sensor group 4
preconfigured mode 2two Zones with occupancy Sensors* Six fixtures shown on each bus, however,
up to 64 fixtures can be connected per bus.
preconfigured mode 1perimeter Daylighting* four fixtures shown on bus 1 and eight
fixtures shown on bus 2, however, up to 64 fixtures can be connected per bus.
Occupancy Sensor Daylight SensorConnectedtosensorgroup1 ControlsBus1only ControlsBus1onlyConnected to sensor group 2 ControlsBus2only ControlsBus2onlyConnected to sensor group 3 Controls both Buses ControlsbothBuseswithequaldaylightgainConnected to sensor group 4 Controls both Buses ControlsbothBuseswithlowerdaylightgainonLoop2
Default behavior for Sensor connections
Simple Applications: Preconfigured modes require no commissioning
Troubleshooting and Maintenance Features•Maintainsredundantmemoryofballastprogrammingforeaseofsingleormultiple
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 4 05.19.10
Specifications
Energi Savr Node QS
Power
•220-240V 50/60Hz,maxcurrentdraw100mA•LightningstrikeprotectionmeetsANSI/IEEEstandard62.31-1980.Canwithstandvoltagesurgesofupto 6 000 V and current surges of up to 3 000 A.
•Useoccupancysensorstoautomaticallyturnthelights on in area when it becomes occupied and toautomaticallyturnthelightsoffinanareaafixedtimeafteritbecomesvacant.
•Fouroccupancysensorscanconnectdirectlytothe Energi Savr Node QS unit.
•Eacharea'soccupiedlevelandunoccupiedlevelcan be programmed.
•PowerSupplyOutputs(4) - 20-24 V 50mAmaximum. -Anauxiliarypowersupplymustbeusedifthe
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 7 05.19.10
Mechanical Dimensions
500-13431 Rev. B
N1771Z096
161.6mm(6.36 in)
60.6 mm (2.39in)
500-13431 Rev. B
N1771Z096
89.7mm(3.53 in)
® Specif icat ion Submittal page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 8 05.19.10
Overview of Wiring Terminals
500-13431 Rev. B
N1771Z096
mains Wiring
Dali bus 1*
Dali bus 2*QS
linkSensorsprogramming
port
* Wire Dali according to local codes.
PELV
® Specif icat ion Submittal page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 9 05.19.10
Wiring: Line Voltage
Wiring from Distribution to Bus Supply
•Turnoffbreakeratdistributionpanel.
•Runline,neutral,andgroundwiresfroma 220-240V~50/60HzfeedtotheEnergi Savr Node QS unit.
Emergency Lighting Applications
•Usenormal(non-essential)poweronly.
•Whennormalpowerdropsout,theEnergi Savr Node QS unit will not power the DALI Buses. When thisoccurs,ballastspoweredfromemergencyfeedsgototheiremergencymode,fulllightoutputbydefault.
Mains Wiring and Low Voltage Separation
•TheEnergi Savr Node QS unit is designed to sepa-ratemainswiringfromPELVcircuits.
connection (24 V power) so that each control unit supplies power to amaximumofthreewallstations.Donotconnectterminal2betweenan Energi Savr Node QSunitandanyotherEnergi Savr Node QS unitand/oranotherpowersupply.
NOTE: There are four sensor groups.Eachgroup wires the same and is shown above.
20 V
IR Receiver
DaylightSensor
OccupancySensor
Common
500-13431 Rev. B
N1771Z096
LUTRON
OccupancySensorDaylight/IRSensor IR Receiver*
Red
Black
Yello
w
Blu
e
Black
Red
Red
Black
Whi
te
Whi
te*
500-13431 Rev. B
N1771Z096
SensorGroup1
Sensor Group 3
Sensor Group 2
Sensor Group 4
LUTRONR
® Specif icat ion Submittal page
Job Name:
Job Number:
Model Numbers:
Energi Savr NodeTM QS QSNE-2DAL-D DALI Fixture Controller
369-243c 15 05.19.10
Installation of Programming Connection•TheEnergi Savr Node QS Hand-Held Device is used to program Energi Savr Node QS units in installations re-quiringcommissioning.