MODULE 6. MATERIALS AND HARDWARE 6.3 Aircraft Materials — Composite and Non Metallic 6.3.1 Composite and nonmetallic other than wood and fabric (b) 1 6.3.2 Wooden structures 1 6.3.3 Fabric covering 1 MODULE 7. MAINTENANCE PRACTICES 7.8 Riveting 1 7.9 Pipes and Hoses 1 7.10 Springs 1 7.11 Bearings 1 7.12 Transmissions 1 7.13 Control Cables 1 7.19 Abnormal Events (b) 2 MODULE 11. TURBINE AEROPLANE AERODYNAMICS, STRUCTURES AND SYSTEMS MODULE 11A. TURBINE AEROPLANE AERODYNAMICS, STRUCTURES AND SYSTEMS 11.1.2 High Speed Flight 1 11.2 Airframe Structures — General Concepts (a) 2 (b) 1 11.3 Airframe Structures — Aeroplanes 11.3.1 Fuselage (ATA 52/53/56) 1 11.3.2 Wings (ATA 57) 1 11.3.3 Stabilisers (ATA 55) 1 11.3.4 Flight Control Surfaces (ATA 55/57) 1 11.3.5 Nacelles/Pylons (ATA 54) 1 11.4 Air Conditioning and Cabin Pressurisation (ATA 21) 11.4.1 Air supply 1 11.4.2 Air Conditioning 1 11.4.3 Pressurisation 1 11.4.4 Safety and warning devices 1 11.7 Equipment and Furnishings (ATA 25) (a) 2 (b) 1 11.8 Fire Protection (ATA 26) (a) and (b) 1 A1 and A2 to B2 differences Some modules performed by B2 cover most of the syllabus for A. For example, module 13 for B2 covers a good part of other destinated to A. MODULES performed by A which the B2 did not perform in any other MODULE (BASIC TRAINING) LEVEL REQUIRED A to B2 differences
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MODULE 6. MATERIALS AND HARDWARE
6.3 Aircraft Materials — Composite and Non Metallic