This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EN 100282 and ASME / ASTM Nonalloy andalloy steels for pressure purposesStandard EN 100282 defines nonalloy and alloy steels for pressure purposes with specified elevated temperatureproperties. The design strength defined for the grades "GH" in the standard applies until +400°C. The design strength of theactual heat resisting steels (16Mo3 and 13CrMo45) is defined at a maximum of +500°C. In addition, the closest equivalentAmerican ASME/ASTM steels for European nonalloy and alloy steels for pressure purposes are presented.
The information on our web site is accurate to the best of our knowledge and understanding. Although every effort has been made to ensureaccuracy, the company cannot accept any responsibility for any direct or indirect damages resulting from possible errors or incorrect
application of the information of this publication. We reserve the right to make changes.
Nonalloy and alloy steels for pressure purposes with specified elevated temperature properties according toASME/ASTM standards Heavy plates
European steels for pressure purposes are not directly comparable with American ASME/ASTM steels for pressurepurposes. There are differences in, for instance, strength values and the ratio between yield and tensile strength. The tablebelow introduces such American steels for pressure purposes that are closest to European steels. Their yield strength isdefined as elongation limit Rp0,2 in accordance with the American testing procedure for steels for pressure purposes.
Yield strengthReH MPa
Tensile strengthRm MPa
ASME SA / ASTM A Heavy platethickness mm
205 380 – 515 A 285GR C 5 – 50
205 380 – 515 A 516GR 55 5 – 90
220 415 – 550 A 516GR 60 5 – 90
240 450 – 585 A 516GR 65 5 – 90
260 485 – 620 A 516GR 70 5 – 90
315 515 – 690 A 387GR 11 Cl 2 5 – 51
345 485 – 620 A 537CL 1 5 – 60
275 450 – 585 A 387GR 12 Cl 2 7 – 51
Order & delivery
Inspection documents
Inspection documents are EN 10204 compliant.
General terms of sale for hot rolled steels
General delivery information for hot rolled steels can be found from documents Markings and packing, Ultrasonic testing,Terms of transport and General terms of sale.
The content of this document has been created from web page last updated 25 Sep 2013Our sales and technical support are happy to give you more information. Visit www.ruukki.com/contactus.
EN 100282 and ASME / ASTM Nonalloy and alloysteels for pressure purposes