This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Electronic Panel Meters DIGEM – Preference Program– Process control, automation & laboratory uses– Class 0.01 to 1– Current, Voltage, Frequency, Temperature, RPM,
Pressure, etc.– LED/ LCD displays– Display 1999 to 99999 digits (31/2 to 5 digits)– DIN 43700 panel mounting cases
This catalogue gives you an overviewof our preference program. You havea selection from a complete programof electronic panel meters.
The modern product palette is care-fully selected on the requirements ofmeasurement and display technolo-gies, systems design and assemblytechnologies.
GOSSEN Müller & Weigert panelmeters fulfil all requirements of theEuropean EMC guidelines without anyrestrictions.
You receive invariable high qualityproducts that are constantly controlledby a strict quality control system.
Type A1125 A1375 A1275 A1215 A1235Mechanical Data* Page 4 5 6 7 8Front panel dimensions / mm 48 x 24 96 x 24 96 x 24 96 x 24 96 x 24Panel cutout / mm 45 x 22.5 92 x 22.2 92 x 22.2 92 x 22.2 92 x 22.2Installation depth / mm 93 126 141 72 143Display (7 Segments)Display colour red / green red red / green red / green red / greenCharacter heigh / mm 8 14 14 14 14– 1.999 ...1.999 (31/2 digits) • • •– 1.999 ...9.999 (4 digits) •– 19.999 ...19.999 (41/2 digits) opt. •– 19.999 ...32.765 (43/4 digits)– 19.999 ...99.999 (5 digits) •Display range programmable opt. •Decimal point programmable opt. •Graphic DisplayInputsMeasurement range card • •Amount of measurement ranges 1 1 1 max. 4 36Selection with Jumper Keys, SWProgrammable •Measuring FunctionsDC voltage / DC current •/• •/• •/• •/• •/•0 ... 20 mA / 4 ... 20 mA •/• •/• •/• •/• •/•AC voltage / AC current •/• •/• •/•TRMS voltage / RMS voltage •/ – •/ –TRMS current / RMS current •/ – •/ –Frequency / Pulse counterThermocouple / Pt100 –/• –/• •/•RPMPressureOutputsAnalog output •Comparator 2Limit values (Relay)BCD 5 V / 24 V (isolated)Interface RS232 / RS485 •/ –Transd. pow. sup. (only for 4 ... 20 mA) • •Power SupplyDC 5 V isolated / not isolated –/•DC 24 V / 18 ... 36 V –/• –/• –/• •/ –DC 9 ... 60 V / 90 ... 260 V –/•AC 230 V / 115 V •/ –AC 24 V / 90 ... 230 V •/ – •/• •/•AC 230 / 115 V & DC 18 ... 36 V •Miscallaneous functionsBlanking control • • •Segment test • •Storage • • • •DATA logging •
96 x 48 96 x 48 96 x 48 96 x 48 96 x 48 96 x 48 144 x 72 62 x 38 62 x 38 72 x 7292 x 45.5 92 x 45 92 x 45 92 x 45 92 x 22.2 92 x 45 138 x 68 60 x 36 60 x 36 68 x 68
143 126 130 130 143 130 145 26.5 33 70
red red red / green red / green red / green red / green red / green red/green/ LCD red / LCD14 14 14 14 14 / 20 14 20 14 / 12.7 10
� Single standard mounting elements for all grid types
� Suitable for installation into allknown grid configurations
� Extremely easy installation� Power supply electronically
separated from measurementcircuit, 500 V test voltage
The DIGEM 48 x 24 AK5 panel meteris a 31/2 digits display whose casingwas especially developed for gridapplications.
The included mounting elementsallow for installation into all known24 mm grid systems.
The instrument has a display range of± 1 999 digits, which can optionallybe extended to ± 19 990 digits bysetting an additional digit hardwiredto zero.
Decimal points are permanently setin the instrument, by means of solderbridges at the display, in accordancewith the entries on the serial plate.
With measurements of 48 mm x 24mm, this instrument can be fitted intopractically any grid.
Installation in a control desk is possiblebecause of the shallow installationdepth of less than 100 mm.
With the use of coded jumpers and apotentiometer, it is possible to adjustthe display range of the instrument.
The same method can be used to setthe starting point of the measuringrange.
This model is especially suited fordisplay originating from measurementtransducers.
DIGEM 48 x 24 AK5Digital Indicators for Grid andMosaic ApplicationsType A1125
� Front panel dimensions 96 x 24 mm� Display range – 1 999 … 9 999� Optimally adaptable to respective
measuring tasks through measuring modules
� Programmable, configurationextremely easy
� Power supply electronically isolatedfrom measuring circuits
� Also available with auxiliary power for 2-wire measuring transducers
� Quick installation with mounting tab� Also available as non-programmable
instrument
Characteristic Values, DIGEM 96 x 24 B5
DIGEM 96 x 24 B54 Place Digital IndicatorType A1375
The modular DIGEM 96 x 24 B5 digitalindicator is a high precision panelmeter with a programmable displayrange.
The instrument can be used for multi-ple measuring tasks, depending uponthe installed measuring module.These tasks include:
� Direct voltage� Direct current� Alternating voltage� Alternating current� Temperature
The display range and decimal pointcan easily be adjusted for the respec-tive measuring tasks.
It is also possible to make subsequentadjustments on site.
The measured values are processedby a microcomputer and displayed ona 7-segment display unit.
The lower and upper display rangevalues can be adjusted with the keyson the front of the panel.
The selected parameters can be pro-tected from unauthorised adjustmentsthrough an external contact on theback of the instrument.
Each instrument is equipped with acontrol input which allows for thestorage of display values to memory,and which freezes the current display.The measuring cycle is not influencedby this function.
In the case of the non-programmablevariant, the settings are preset atmanufacturing time. It is thus onlypossible to make subsequent changesat the factory.
The unit of measure for the measuredquantity is indicated with a small tabthat is inserted into a pocket behindthe faceplate.This can be inserted after installation.
Alternating Voltage 0 ... 700 VAlternating Current 0 ... 200 mA, 0 ... 1 A / 5 ATRMS Voltage 0 ... 700 VTRMS Current 0 ... 200 mA, 0 ... 1 A / 5 ACrest Factor 6 (additional 0,5 % of
reading)Temperature Pt100
– 200 ... + 800 °C
Power Supply90 ... 230 V AC 50 / 60 Hzand 90 ... 260 V DCor24 V AC 50 / 60 Hzand 18 ... 36 V DC
Ambient ConditionsOperating Temperature 0 ... + 50°CStorage Temperature – 20 ... + 70°CContamination Level 2Overvoltage Category II
CasingProtection front panel: IP 54
rear panel: IP 20Front Panel frame color blackWeight 0.21 kgInstallation quick mounting tabsTerminals screw terminal blocks
DisplayType 7 Segment LEDDisplay Colour redCharacter Height 14 mmDisplay Range – 1 999 ... 9 999Polarity “–“ is displayed automaticallyDecimal Point programmable or fixedOverflow Display blinking – top dash
Measuring RangesDirect Voltage ± 60 mV to ± 300 VDirect Current ± 2 mA to ± 200 mA
0 ... 20 mA4 ... 20 mA with powersupply for 2-wire transducer
� Front panel dimensions 96 x 24 mm� Red or green LED display,
14 mm high� Max. display range, depending on
model, ± 1 999 and ± 19 999� Can be optimally adapted to
required measurement task with various measurement modules
� Power supply is electronicallyisolated from measuring circuit
� Also available with auxiliary power for 2-wire measuring transducers
The digital display measuring instru-ment, DIGEM 96 X 24 BK5 is suitedfor general use in industrial environ-ments and is optimally equipped forthe respective measurement tasks bymeans of modules on the measuringinputs.
This instrument series containsmodules for the following measure-ment tasks:
� Direct current and voltagemeasurements
� Direct current 4 … 20 mA withauxiliary power for 2-wiremeasuring transducers
� Alternating current and voltage measurements, sinusoidal
� Alternating current and voltage measurements, TRMS
� Temperature measurements
The DIGEM 96 X 24 BK5 consists of aprecision DC voltmeter that can beadjusted to the required measuringtask by the installed measuringmodule.
A suitable measuring module is fittedto each instrument. This is detailed onthe serial plate.
The power supply is electronicallyisolated from the measuring circuit andamounts to, depending on the model,90…230 V AC or 18…36 V DC /24 V AC.
The extra functions, display hold,segment test and brightness controlare all included in each instrument.The inputs for the control of thesefunctions are electronically connectedto the meter input.
DIGEM 96 x 24 BK53.5 or 4.5 Place DigitalIndicator with LED DisplayType A1275
41/2 digit ± 19 999Polarity “–“ is displayed automaticallyDecimal Point internally fixedOverflow Display 31/2 digit: “1....“
41/2 digit : display blinking
Measuring RangeDirect Voltage ± 60 mV to ± 300 VDirect Current ± 2 mA to ± 200 mA
0 ... 20 mA4 ... 20 mA with powersupply for 2-wire transducer
Characteristic Values, DIGEM 96 x 24 BK5Alternating Voltage 0 ... 2 V to 0 ... 250 VTRMS Voltage 0 ... 2 V to 0 ... 250 VAlternating Current 0 ... 200 mA, 0 ... 1 A / 5 ATRMS Current 0 ... 200 mA, 0 ... 1 A / 5 ATemperature Pt100
– 50 ... 199,9°Cand– 200 ... 800°C
Power Supply90 ... 230 V AC 50 / 60 Hzor18 ... 36 V DC / 24 V AC
Ambient ConditionsOperating Temperature 0 ... + 50 °CStorage Temperature – 20 ... + 70 °CRelative Humidity max. 85%Contamination Level 2Overvoltage Category II
CasingProtection front panel: IP 50
rear panel: IP 20Material polycarbonateBezel black, optionally grey,
� Front panel dimensions 96 x 24 mm� Red LED display, 14 mm high� Free scalable measurement ranges� Up to 2 open collector outputs� Analog output� RS232 Interface� IP 54 protection at front panel
The DIGEM 96 x 24 MF5 is a verycompact DIN size instrument. The wide range of additional functionsbuilt in to the DIGEM 96 x 24 MF5makes this a universal instrument forhigh performance automation andmeasurement tasks.
The instrument can be used formultiple measuring tasks, dependingupon the chosen equipment. These tasks include:
� Direct voltage� Direct current� Alternating voltage� Alternating current� Temperature
The display range and decimal pointcan easily be adjusted for the respec-tive measuring tasks, and is freelyscalable. It is also possible to makesubsequent adjustments on site.
The operation and parameterisation ofthe instrument can be adjusted withtwo keys, or through the interfacewith the PC-Software (Accessories).
The DIGEM 96 x 24 MF5 is equippedwith the following functions:
� Scalability of the display withinternally stored functionality
� Analog output� Measurement value assessment� Display formation� Alarm configuration� DATA logging� Cascading and LOOP operation
The instrument is designed for applica-tions that require monitoring and eval-uation of measurement values, as wellas forwarding via analog output orserial interface. This also includes 2limit values that can be distributedover the measurement range.
DIGEM 96 x 24 MF55 Place Digital Indicator with Limit Values and OutputsType A1235
DisplayType 7 Segment LEDDisplay Colour redCharacter Height approx. 14 mmDisplay Range – 19 999 ... 99 999Polarity “–“ is displayed
automaticallyDecimal Point programmableOverflow Display programmable, blinking
Measuring RangesDirect Voltage ± 200 mV to ± 650 VDirect Current ± 20 mA to ± 200 mA
0 ... 20 mA; 4 ... 20 mAAlternating Voltage 0 ... 650 VAlternating Current 0 ... 200 mA
Characteristic Values, DIGEM 96 x 24 MF5Temperature Pt100
– 200 ... + 850 °CConnection type: 2, 3 or 4 wireThermocouples:Type B, E, J, K, L, N, R, S, T, U– 260 ... + 1820 °CShearing pin available
InterfaceLimit value: 2 open collectorAnalog output: max. Resolution 4050 stepsRS232
Power Supply230 V / 115 V AC 50 / 60 Hzand 18 ... 36 V DCWide range power supply
Ambient ConditionsOperating Temperature 0 ... + 50 °CStorage Temperature – 40 ... + 80 °CRelative Humidity max. 85%Contamination Level 2Overvoltage Category II
� Front panel dimensions 96 x 48 mm� Red LED display, 14 mm high� Free scalable measurement ranges� Up to 2 open collector outputs and
optionally 4 Relays� Analog output� RS232 or RS485 Interface� IP 54 protection at front panel
Characteristic Values, DIGEM 96 x 48 MF5
DIGEM 96 x 48 MF55 Place Digital Indicator with Limit Values and OutputsType A1245
The DIGEM 96 x 48 MF5 is a veryconvenient DIN-size display instrument.The wide range of extra functions builtin to the DIGEM 96 x 48 MF5 makesthis a universal instrument for highperformance automation and measure-ment tasks.
The instrument can be used for multi-ple measuring tasks, depending uponthe chosen equipment.These tasks include:
� Direct voltage� Direct current� Alternating voltage (TRMS)� Alternating current (TRMS)� Temperature
The display range and decimal pointcan easily be adjusted for the respec-tive measuring tasks, and is freelyscalable.
It is also possible to make subsequentadjustments on site.
The operation and parameterisation ofthe instrument can be adjusted with 2or 4 keys, or through the interfacewith the PC-Software (Accessories).
The DIGEM 96 x 48 MF5 can optio-nally be equipped with the followingfunctions:
� Scalability of the display with inter-nally stored functionality
� Analog output� Measurement value assessment� Display formation� Alarm configuration� DATA logging� Cascading and LOOP operation
The instrument is designed for appli-cations that require monitoring andevaluation of measurement values, aswell as forwarding via analogoutput or serial interface. This alsoincludes 4 limit values that can bedistributed over the measurementrange and freely assigned to theoutput variables.
Temperature Pt100– 200 ... + 850 °CConnection type: 2, 3 or 4 wireThermocouples:Type B, E, J, K, L, N, R, S, T, U– 260 ... + 1820 °CShearing pin available
InterfaceLimit value: max. 4 relays (opt.)or 2 open collector outputsAnalog output:max. Resolution 4050 steps RS232 or RS485
Power Supply230 V / 115 V AC 50 / 60 Hz18 ... 36 V DC / 24 V DC18 ... 36 V DC and 230 V / 115 V ACWide range power supply
Ambient ConditionsOperating Temperature 0 ... + 50 °CStorage Temperature – 40 ... + 80 °CRelative Humidity max. 85%Contamination Level 2Overvoltage Category II
� Front panel dimensions 96 x 48 mm� Display range – 1 999 … 9 999� Can be optimally adapted to
required measurement task with various measurement modules
� Two separately adjustable limit values (option)
� Extremely easy programming� Power supply is electronically
isolated from measuring circuit� Also available with auxiliary power
for 2-wire measuring transducers� Casing suitable for grid mounting� Quick installation with mounting
slider
The modular DIGEM 96 x 48 B5installation measurement instrumentis extremely easy to program.
The instrument can be used formultiple measuring tasks, dependingupon the installed measuring module.These tasks include:
� Direct voltage� Direct current� Alternating voltage� Alternating current� Temperature
The display range can be adapted forthe 4 … 20 mA and 0 .. 20 mAmeasuring ranges without a calibrator,even after installation of the instru-ment.
The measuring instrument is thus alsosuitable for applications that requirefrequent, on-site adjustments to thedisplay.
The DIGEM 96 x 48 B5 is a highprecision DC voltmeter, which isadapted to the required measuringtask by the installed measuringmodule.
The measured values are processedby a microcomputer and displayed ona 7-segment display unit.
Upper and lower display range values,relay switching performance, limitvalues and hysteresis can all beadjusted with the front panel keys.
The selected parameters can beprotected against unauthorisedalteration with an external contact atthe back of the instrument.
If limit values need to be adjustedduring operation, protection can bedisabled.
Each instrument is equipped with acontrol input which allows for thestorage of display values to memory,and which freezes the current display.The measuring cycle is not influencedby this function.
DIGEM 96 x 48 B54 Place Digital IndicatorType A1385
DisplayType 7 Segment LEDDisplay Colour redCharacter Height 14 mmDisplay Range – 1 999 ... 9 999Polarity “–“ is displayed automaticallyDecimal Point programmableOverflow Display blinking – top dash
Measuring RangesDirect Voltage ± 60 mV to ± 300 VDirect Current ± 2 mA to ± 200 mA
and0 ... 20 mA4 ... 20 mA with powersupply for 2-wire transducer
Characteristic Values, DIGEM 96 x 48 B5Alternating Voltage 0 ... 2 V to 0 ... 700 VAlternating Current 0 ... 200 mA, 0 ... 1 A / 5 ATRMS Voltage 0 ... 700 VTRMS Current 0 ... 200 mA, 0 ... 1 A / 5 ACrest factor 6 (additional 0,5 % of
measurement value)Temperature Pt100
– 200 ... + 800 °C
Power Supply230 V / 115 V AC 50 / 60 Hzor18 ... 36 V DC / 24 V AC
Ambient ConditionsOperating Temperature 0 ... + 50 °CStorage Temperature – 20 ... + 70 °CContamination Level 2Overvoltage Category II
� Front panel dimensions 96 x 48 mm� Red or green LED display� Digit height: 14 mm or 20 mm � Wide, freely selectable, setting range� Decimal point and final value
adjustable� Brightness control� Zero point offset� IP 54 protection at front panel
Characteristic Values, DIGEM 96 x 48 SN5
DIGEM 96 x 48 SN53.5 Place Digital IndicatorType A1255
The DIGEM 96 x 48 SN5 is a standarddisplay in DIN-casing that allows for awide adjustable measurement rangefor current and voltage.
The DIGEM 96 x 48 SN5 is perfectlysuited for interfacing with differentauxiliary powers because of its widerange power packs (option).
The final value can be adjusted in therange 1:3. This feature, including thehigh level of protection, makesmeasurement tasks in robust environ-ments possible.
The display range and decimal pointpre-selection is accomplished bymeans of clearly arranged codedjumpers at the back of the case.
The initial and final values are adjust-able with potentiometers located atthe front of the instrument.
Measuring RangesDirect Voltage ± 1 V to ± 300 VDirect Current 0 ... 1 mA
0 ... 20 mA0 ... 200 mA
Power Supply230 V / AC 50 / 60 Hz or115 V / AC 50 / 60 Hz or24 V AC 50 / 60 Hz or18 ... 36 V DC and230 V/115 V AC 50 / 60 HzWide range power supply
Ambient ConditionsOperating Temperature 0 ... + 50 °CStorange Temperature – 40 ... + 80 °CRelative Humidity max. 85%Contamination Level 2Overvoltage Category II
� Power supply is electronicallyisolated from the other circuits
� Also available with auxiliary power for 2-wire measuring transducers
� RS232 and RS485 interface(optionally)
� Analog output (optionally)� Casing suitable for grid mounting
The DIGEM 96 x 48 CK5 is aprecision, modular panel meter.
The instrument can be equipped witha multitude of various measuringmodules for a variety of measuringtasks.
Scale graduations and set points areeasy to adjust with the keys at thefront panel, even after the instrumenthas been installed.
Furthermore, the extensive additionalfunctions expand the range of applica-tions so that the measuring instru-ments can be adapted optimally tothe required task.
These instruments can be equippedfor the following measurement tasks:
� Direct current and voltagemeasurements
� Alternating current and voltage measurements
� Temperature measurements� Frequency and RPM measurements� Pressure measurements� Pulse counter� Display in cos ϕ� Non-linear input quantities
The instrument is optionally alsodesigned for applications which requiremonitoring and evaluation ofmeasurement values, as well asforwarding these via analog output orserial interface.
DIGEM 96 x 48 CK5Digital Indicator with LimitValue and LED DisplayType A1265
DIGEM 144 x 72 C5Digital Indicator with LimitValue and LED DisplayType A1005
The DIGEM 144 x 72 C5 is suited forapplications that require more thantwo limit values, or where simul-taneous use of outputs and interfacesis necessary.
The modular measuring input can beequipped for the following measuringtasks:
� Direct current and voltagemeasurements
� Alternating current and voltagemeasurements
� Temperature measurements� Frequency and RPM measurements� Pulse counter� Display in cos ϕ� Non-linear input quantities
The MESSCONTACTER model allowsfor the configuration of four limitvalues. Alarm messages are read outvia four relays. Alarms are alsosignalled with LED’s.
Additional features of this model include.
� Adjustable switching hysteresis� Adjustable limit value time delay� Storage of an alarm message to
memory
TRMS Voltage 0 ... 500 VTRMS Current 0 ... 200 mA; 0 ... 1 A / 5 ACrest Factor 6 (additionally 0,5 % of
Depending on the model, thesemeasuring instruments can beequipped with a bright LED display ora reflective LCD display.
The LCD is optionally available withadditional illumination (transflective).
The instrument is suited for themeasurement of direct current ordirect voltage.
Measuring and display ranges arepreset at the factory.
The instrument requires a supplyvoltage of 5 V that is electricallyconnected to the measuring circuit.
Power packs for 18 V to 36 V DC and4.75 V to 15 V are available asaccessories.These power packs are snapped ontothe rear panel of the measuringinstrument.
AccessoriesPower Packs for theDIGEM 62 x 38 A5
Power Supply electrically isolatedfrom measuringcircuit
Test Voltage 500 VPrimary Voltage depending on
model4.75 V ... 15 V DCor 18 ... 36 V DC
Secondary Voltage 5 V ± 5 %Load Capability max. 250 mAResidual Ripple < 200 mVPower Consumptionat Max. Load 3 W
Terminals 14 pole plugconnector
DIGEM 62 x 38 A53.5 Place Digital Indicator with LED or LCD DisplayType A1155
DisplayType 7 Segment LED
with 14 mm character heightor LCD reflectivewith 12.7 mm character height
Polarity “–“ is displayedautomatically
Decimal Poit externally adjustable or fixed
Overflow Display “1 ...“
Characteristic Values, DIGEM 62 x 38 A5Mesuring RangesDirect Voltage ± 2 V to 200 V
and additionally ± 200 mVDirect Current ± 200 µA to ± 200 mAAuxiliary Power 5 V ± 5 %
Ambient ConditionsOperating Temperature 0 ... + 50 °CStorage Temperature – 20 ... + 70 °CRelative Humidity max. 85%
CasingProtection front panel: IP 50
rear panel: IP 0Installation snap mountingTerminals plug connector,
appropriate plugis included withinstrument
16
� Display range: ± 1 999� Minimal installation depth of only
26.5 mm� 5 V supply power� Power pack available as accessory� Simple installation with snap
DIGEM 62 x 38 B54.5 Place Digital Indicator with LED or LCD DisplayType A1175
Depending on the model, thesemeasuring instruments can beequipped with a bright LED display ora reflective LCD display.
The instruments have been especiallyequipped to meet the requirement ofthe equipment manufacturers.
Connection is accomplished with a14-pin plug connector. The required plug is included with theinstrument.
The instrument has been designed forthe measurement of direct current anddirect voltage.
The measuring and display ranges arepreset at the factory in accordancewith the required measuring task.
The power supply is 5 V ± 5 % and iselectrically connected to the measu-ring input.
By removing a link, the measuringinstrument can have a differentialinput, in which case no more than+ 2 V may be applied between themeasurement input and the 0 V powersupply terminal.
Measuring RangesDirect Voltage ± 2 V to 200 VDirecz Current ± 200 µA to ± 200 mAAuxiliary Power 5 V ± 5 %
� Adjustable zero point and final value� Protection at front panel IP 54� Front measurements 72 x 72 mm� Installation depth only 70 mm
This instrument features twomeasuring channels, which can beused variably, for example: onemeasuring channel for display and onemeasuring channel to monitor thevoltage of a battery.The display and functions are customprogrammed at the factory.
A special menu allows the zero pointand final value as well as the displayrange to be adjusted at will.One limit value can be used withmeasuring channel 1.