Easy installation, ideal for updating/ retrofitting Easier to obtain the safety proof, because everything is realized in hardware Easy adjustment of the sand volume without the need of spezial tools EKK0030 The compact sanding controller EKK0030 is a multifunctional and universal controller for solenoid operated NOWE sanding devices (ECON/N45). This compact controller is used to simplify the sanding system integration into the vehicle control system. It can be used for conventional as well as for speed dependent systems. On the one hand this is realised by bundling and standartization the interfaces to the train. On the other hand by integration of control functions (e.g. PWM generation, blow after function, interpretation of sand flow diagnoses SDS, error monitoring and so on.) wich do not longer have to be realised on vehicle side. The compact controller is build with a FPGA (Field programmable gate array), -NO SOFTWARE IS USED- so the proof of safety is much easier. Interfaces 14 x Digital inputs (Begin of sanding, testing, digital speed interface and so on.) 6 x Digital signal outputs (Status and error messages) Compact Sanding Controller CUSTOMER BENEFITS : Innovating to improve performance and safety
2
Embed
EKK0030 - solutions.wabtec.com · NOWE GmbH Heilswannenweg 66, 31008 Elze - Germany email : [email protected] FUNCTIONAL SCHEME COMPACT CONTROLLER FT NOWE Compact Sanding Controller
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Easy installation, ideal for updating/retrofitting
Easier to obtain the safety proof, because everything is realized in hardware
Easy adjustment of the sand volume without the need of spezial tools
EKK0030
The compact sanding controller EKK0030 is a multifunctional and universal controller for solenoid operated NOWE sanding devices (ECON/N45).This compact controller is used to simplify the sanding system integration into the vehicle control system. It can be used for conventional as well as for speed dependent systems. On the one hand this is realised by bundling and standartization the interfaces to the train. On the other hand by integration of control functions (e.g. PWM generation, blow after function,
interpretation of sand flow diagnoses SDS, error monitoring and so on.) wich do not longer have to be realised on vehicle side.The compact controller is build with a FPGA (Field programmable gate array), -NO SOFTWARE IS USED- so the proof of safety is much easier.
Interfaces14 x Digital inputs (Begin of sanding, testing, digital speed interface and so on.)6 x Digital signal outputs (Status and error messages)