Top Banner
Dynamic Sectors of The Effi-Cycle
12

Effi Cycle Presentation

Aug 23, 2014

Download

Documents

Praveen Chand G
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Effi Cycle Presentation

Dynamic Sectors of The Effi-Cycle

Page 2: Effi Cycle Presentation

Sectors Discussed

• Transmission System• Braking Systems• Suspension Systems• Misc. Dynamic Parts Involved

Page 3: Effi Cycle Presentation

Transmission Systems

• Early self driven locomotive systems used to have the driver right above the wheel for manually powering it.

• Leonardo Da Vinci with his innovative idea of chain and sprocket(cog).

• With this it was possible to have the driver in the middle of the two wheels for better balancing and comfort

Page 4: Effi Cycle Presentation

Chain and Sprocket Drive with Derailleur System

Page 5: Effi Cycle Presentation

Chain and Sprocket Drive with Derailleur SystemContd..

• Components• Pedal (extendable)• Cranset• Chain• Cogset• Derailleur Gears (Front/Rear)• Shifters• Bowden Cables• Chain Tubes

Page 6: Effi Cycle Presentation

Chain and Sprocket Drive with Derailleur SystemContd..

• This is a conventional system used in every mechanically driven locomotion systems.

• The chain alignment and their spacing can be done according to our trike design.

• The chains and can be extended from the pedal to derailleur using chain tubes and sprocket pulleys.

Page 7: Effi Cycle Presentation

Braking Systems

• Since efficient braking system is also evaluated in the competition and also its one of the most important component in the trike, Disc Brakes.

Page 8: Effi Cycle Presentation

Braking Systems Contd..

Page 9: Effi Cycle Presentation

Suspension Systems

• These are very important for smooth ride• Their locations will be at some key places for almost all

the designs.• Only their orientations and dimensions may vary

according to the chassis design• Key spots are• Head Tube Forks• Wheel to Chassis Zone• Seat Stay to Hub

Page 10: Effi Cycle Presentation

Suspension Systems Contd..

• Usually for front and rear two different types of suspensions are used• Front : Simple Spring• Rear : Spring with a damper

• The suspension systems specifications will be a standard set.

• We need to use according to the simulation results

Page 11: Effi Cycle Presentation

Suspension Systems Contd..

Page 12: Effi Cycle Presentation

Suspension Systems Contd..