ECCN Product Webinar Audio02252009 - Eatonpub/@electrical/documents/content/... · Home Theater, Gaming Devices, HDTV ... • Installers did 10% less new construction projects in
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
A-BUS Audio / CAT5 AudioNo Amplifier Needed Uses standard CAT5 Cable vs. Speaker Wire Audio is supplied by any type of device with a Audio Output
5
9 9
Wireless Systems The Term “Wireless” in the audio and video world most often means less wires… Today’s wireless systems focus primarily around room speakers.
4 Basic ComponentsAmplifier
Any device with Speaker outputs Sender
Takes a speaker output and turns it into a wireless signal (2.4GHz)
ReceiverReceives a stereo signal from the Sender. Also provides the needed power for the speakers
SpeakersCan be wired as shown in photo Can be completely wireless
10 10
Wireless Speakers
Key Features • Systems use comprise of 2.4GHz and 900 MHz• Most systems are IR
• Sender and Receiver Must be in the same Room • RF systems
• More flexibility for speaker placement
Disadvantages • Each speaker needs to be powered
• Interference from other 2.4GHz or 900 MHz products
• Wireless reliability and quality
6
11 11
Traditional Audio Systems
4-conductor speaker cable to inputs
4-conductor speaker cable from outputs
VolumeControl
2-conductorS
peaker Cable
2-conductorS
peaker Cable
Note: If volume control is not used the output cable will connect directly to the speakers.
Key Features• Audio in every room
• Inexpensive to install
• The system only requires one amplifier to run the entire home or office
Resources:Structured Wiring Websitewww.structured-wiring.netDedicated Email For Product / Program [email protected]
20 20
Tier III Training
5 Structured Wiring training classes in 2009Eaton will be offering 5 Tier III classes for Structured Wiring in 2009. The classes are one & one half day courses focused on structured wiring products used in a residential and light commercial applications.
The course covers these topicsProduct Overview Product Features, Functions, and Benefits Target Markets / Growth Potential Selling Opportunities Wiring Labs
Course DatesMarch 5-6, 2009 Dallas TXMay 21-22, 2009 Atlanta, GA June 18-19, 2009 Phoenix , AZAugust 20-21, 2009 Chicago, IL September 17-18, 2009 Portland, OR
11
21 21
Ask The Expert…
Un-mute Your Phone…• Open Questions For 15 Minutes• Email [email protected], if you don’t want
to talk on the phone
22 22
Thank You!
Next Month’s Product Webinar• Date: March 25, 2009• Topic: CH Breakers• Presenter: Rich Elchik, Product Manager