e_BC 1700

: STEELPRESS Sp. z 0.0.ul. Powstancow Wielkopolskich 48PL-62-03l Lubon -Poznan .

, RDW Vehicle Techno1ogy Division

.

THE NETHERLANDS(NEDERLAND)

a:tD

!ElEC TYPE-APPROV AL CERTIFICATE

Communication conceming the:

-type appnwal-extension of type-approval- refusal of type appro'lal- 'llithdrawal of type appro'lal

of a type of a component with regard to Directive 94/20/EC.

Type-approval number (1) : e4*94/20*94/20*2509*Ol

Reason for extension . constructive modifications

Approval mark : e4 00-2509

0.1.

SECTION I

Make (trade name ofmanufacturer) : STEELPRESS

0.2. Type and general commercialdescription(s) : BC-1700, coupling head

0.3. Means of identification of type, ifmarked on the ',<ehie16/component/separate teehnieallH1it(2) : Make (trade name) and type

-0.3.1. Location of that marking : on housing

0.5. Name and address of manufacturer

07. In the case of components and separatetechnical units, location and method ofaffixing of the EEC approval mark : on housing, data stamped

P.O. Box 777

2700 AT ZoetermeerThe Netherlands

Tel. + 31 (0)793458143

Fax + 31 (0)79 345 8043www.rdw.n1

Vehicle Approval and Information

.

Couplings-component 94.20-94.20 v4.00 Page l oj3

Couplings-component 94.20-94.20 v4.00 Page 2 of3

Type-approval number: e4*94/20*94/20*2509*Ol

0.8. Name(s) and address(es) ofassemblyplant(s) : see information document (Annex III),

item 0.8

SECTION fi

1. Additional information (whereapplicable) : see Appendix I

2. responsible forcarrying out the tests : DEKRA Automobil GmbH

Automobil Test CenterSenftenberger StraBe30D-01998 Klettwitz

. 13-6-2007

: 200411341 Extension 01

: see Appendix I

. Zoetermeer

9. The index to the information package lodged with the competent authority that has grantedtype-approval, which may be obtained on request, is attached:- Application form relating to Annex III and annexed drawings.- Drawings and instructions for attachment.- Fitting instructions.

(1) The EEC type-approval number appearing on this document shall consist of all sections outlined in Annex vn to Directive 70/1 56/EEC,as last amended by Directive 92/53/EEC. The component itself shall be marked as prescribed in the relevant separate Directive.

(2) lf the means of identitication of type contains characters not relevant to describe the vebicle, component or separate technical unit typescovered by tbis type-approval certificate such characters shall be represented in the documentation by the symbol: "?" (e.g.ABC??l23??).

..

3. Date oftest report

4. Number of test report

5. Remarks (if any)

6. Place

7. Date

8. Signature

: B50-X

APPENDIX I

Additional information

Class of the type of coupling

Categories or types of vehicles forwhich the device is designed orrestricted

Maximum (1)

to EEC type-approval certificate number: e4*94/20*94/20*2509*Ol

concerning the component type-approval of mechanical coupling devices with regard to Directive94/20/EC.

1.

1.1.

1.2.

1.3.

lA.

1.5.

1.6.

1.7.

1.8.

5.

Maximum verticalload S at thecoupling point (1)

Maximum load U at the fifth wheelcoupling point (1)

Maximum

. see instructions for attachment and use

: 15,8 kN

Instructions for attachment of thecoupling type to the vehicle andphotographs or drawings of the fixingpoints at the vehicle given by themanufacturer; additional information ifthe use of the coupling type isrestricted to special types of vehicles

Information on the fitting of specialtowing brackets or mounting plates (1)

Remarks (2)

: 100 kg

tonnes

kN

. see instructions for attachment and use

: not applicable

: The installation of the coupling device on thevehicle must be checked according to therequirements given in Annex VII (see Annex IParagraph 5.10.)

(1)Delete where not applicable.

(2)Including infonnation as to whether fifth wheel couplings are unsuitable for positive steering.

Couplings-component 94.20-94.20 v4.00

..

Page 3 oj3