EasyIO FS-32 Installation Guide - Microsoft...EasyIO FS Series – Installation Guide v1.1 8 Step 3 Position the EasyIO FS-32 on the DIN rail mount till it hooks over the top edge

EasyIO FS Series – Installation Guide v1.1

1

EasyIO FS-32 Installation Guide


2

Document Change Log

26thMarch 2017 Document created.

17th

Dec 2018 Updated disclaimer and support channel emails addresses


3

Disclaimer Confidentiality Notice

The information contained in this document is confidential information of EasyIO Holdings Pte Ltd. Such information and the software described herein, is furnished under a license agreement and may be used only in accordance with that agreement. The information contained in this document is provided solely for use by EasyIO Holdings Pte Ltd employees, licensees, and system owners; and, except as permitted under the below copyright notice, is not to be released to, or reproduced for, anyone else. While every effort has been made to assure the accuracy of this document, EasyIO Holdings Pte Ltd is not responsible for damages of any kind, including without limitation consequential damages, arising from the application of the information contained herein. Information and specifications published here are current as of the date of this publication and are subject to change without notice. The latest product specifications can be found by contacting our corporate headquarters or support channel. Trademark Notice EasyIO logo are registered trademarks of EasyIO Holdings Pte Ltd. BACnet and ASHRAE are registered trademarks of American Society of Heating, Refrigerating and Air- Conditioning Engineers. All other product names and services, mentioned in this publication, that are known to be trademarks, registered trademarks, or service marks are the property of their respective owners. Copyright and Patent Notice This document may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without prior written consent from EasyIO Holdings Pte Ltd Copyright © 2019 EasyIO Holdings Pte Ltd. All rights reserved

Disclaimer

The material in this manual is for information purposes only. The contents and the product it describes are subject to change without notice. EasyIO Holdings Pte Ltd makes no representations or warranties with respect to this manual. In no event shall EasyIO Holdings Pte Ltd be liable for any damages, direct or incidental, arising out of or related to the use of this manual.

EasyIO Holdings Pte Ltd 101, Cecil Street #09-07 Tong Eng Building Singapore 069533 Worldwide and Asia Pacific Support : [email protected] Americas Support : [email protected] Europe Support : [email protected]

mailto:[email protected]




4

Table of Contents Introduction .................................................................................................................................................... 5

Dimension ....................................................................................................................................................... 5

Physical Installation Instructions .................................................................................................................... 7

Opening the Top Cover ................................................................................................................................. 10

Micro SD Card Installation ............................................................................................................................ 11

Technical Support ......................................................................................................................................... 13


5

Introduction This document provides the installation guide/mounting guide for the EasyIO FS-32 controller. Do not mount the EasyIO FS-32:

- In an area where excessive moisture, corrosive fumes or explosion vapors are present. - Where excessive vibration or shock is likely occur - Location where excessive electrical noise such as large magnetic interference or variable speed

drive modules

Dimension Below are the dimensions of the device. Below are the dimensions for the EasyIO FS-32.

Top View. Width including connectors is approx 124mm


6

Side view and back view.

Improved DIN rail mounting for easy dismantling.

Alternate mounting option dimension


7

Physical Installation Instructions Step 1 Securely fasten the DIN rail to the enclosure base plate. A standard DIN rail width 35mm.

Typical industrial DIN rail, 35mm

Step 2 Use a screwdriver to unlock the 2 numbers of locking clips. Eventually you may use your finger.


8

Step 3 Position the EasyIO FS-32 on the DIN rail mount till it hooks over the top edge of the DIN rail.

Push the controller towards the bottom part of the DIN rail

Step 4 Press/flatten the EasyIO FS-32 to make sure the bottom of the base cover touches the enclosure base plate. Step 5 Use a screwdriver to lock the locking clips to secure the EasyIO FS-32 to the DIN rail. Eventually you may use your finger to press upwards and lock the clip to the DIN rail.


9

Step 6 To keep the assembly secures a DIN rail end clip can be use.

Image shows a typical “DIN rail end clip(end stopper)”

The EasyIO FS-32 comes with 2 mounting holes as optional mounting. Occasionally if DIN rail mounting is not practical, you can use screws to mount the EasyIO FS-32 to an enclosure base plate.


10

Opening the Top Cover Step 1 Use a Philips screwdriver to unscrew the 2 Philips screw located on top the top cover.

Remove the 2 Button HeadPhilips screws

Step 2 Hold both end of the top cover to lift up the top cover. Occasionally a small flat head screw driver might come handy in case the top cover stuck to the bottom cover.

Hold both sides and lift up the top cover


11

Micro SD Card Installation Each EasyIO FS Series comes with a micro SD memory card slot.

Specifications Remark

Brand tested recommended Transend, Kingston Capacity tested 2GB, 4GB, 8GB, 16GB Class Class 4

Class 10

***Please note that the Micro SD card in the EasyIO FS Series is optional and the controller does not complete with the SD Micro Card as standard. The SD Micro card can be purchased separately that have the following specifications.***

Step 1 Locate the micro SD card slot at the bottom right corner. The SD card holder is right above the ethernet port. EasyIO FS Series comes with slide-in type of micro SD card holder.


12

Step 2 Slide the micro SD card with contact pins face down.

Step 3 Carefully push the micro SD card in until it is lock. A click sound indicates the micro SD card is locked in position.


13

Step 4 To remove the micro SD card , push the micro SD card in towards the holder until you hear a click sound. The micro SD card will eject. Then slide the micro Card out.

Technical Support

For technical issue, please contact respective region support channel. Worldwide and Asia Pacific Support : [email protected] Americas Support : [email protected] Europe Support : [email protected]




EasyIO FS-32 Installation Guide - Microsoft...EasyIO FS Series – Installation Guide v1.1 8 Step 3 Position the EasyIO FS-32 on the DIN rail mount till it hooks over the top edge

Documents