EAR 8L6 Integrated / Pre-Main Amplifier The EAR 8L6 has been designed to meet a wide variety of needs, from the most demanding of audiophiles to the professional seeking high quality monitoring equipment in the studio field. The circuit design uses push-pull output and driver stages, a high quality in- house designed output transformer and low negative feedback. Tube life is long (and replacement costs modest) and the circuit operates in pure Class A. An unusual feature of the 8L6 is that it can be used as an integrated amplifier or as separate preamplifier and power amplifier. This is selected using the switch at the rear of the unit marked ‘Pre/Power split on’. In integrated amplifier mode the front panel source selector works in the usual way to select any of the five inputs available on the rear. No connection is required between the ‘Pre-out’ sockets and the ‘Power amp in’ ________________________________________________________________________________ ________________ E.A.R./Yoshino Ltd. Rectory Farm, Cambridge Road, Godmanchester, HUNTINGDON, Cambs.PE29 2BP Tel +44 (01480)453791 Fax +44 (01480)432006 www.ear-yoshino.com E- mail: [email protected]