Eagle Ford Shale Stimulation Demands: Good Engineering, Optimized Fluid Selection and Execution Jorge Manrique, PE – Nabors Completion & Production Services.

Eagle Ford Shale Stimulation Demands: Good Engineering, Optimized Fluid Selection and Execution

Jorge Manrique, PE – Nabors Completion & Production Services Co. Buenos Aires, 9 de Agosto de 2012

Who we are…

5th Largest Pressure Pumping Co. in North America (~1 M HHP)

Experienced in All Major US Basins (29 Districts)

Over 13,600 DUG Stages Completed in 2011

HRHP Equipment and Experienced Personnel (15K PSI)

World Oil, Eng. Innovation Awards & Patented Green Chemicals

Pioneers in Water Re-use

Friction Loop Analysis

Own RC Proppant Technology Available

In-House Engineering / Design Optimization

• Pressure Pumping Cementing Fracturing

• Wire Line• Coiled Tubing (16)• Work Over Well Servicing (750)• Fluid Management, Storage & Disposal• Transportation & Logistics

What we do…

Washington

Oregon

California

Nevada

Idaho

Montana

Wyoming

ColoradoUtah

New MexicoArizona

Kansas

Nebraska

South Dakota

Minnesota

Wisconsin

Illinois

Iowa

Missouri

Arkansas

Alabama

Tennessee

MichiganNew York

Vermont

Florida

Mississipp

i

Kentucky

South Carolina

North Carolina

MarylandOhioDelaware

N. Dakota

Pennsylvania

Oklahoma

Indiana West Virginia

New Jersey

Connecticut

Massachusetts

Maine

Rhode Island

Virginia

New Hampshire

Haynesville & Bossier Shale Play

Dallas

Barnett Shale Play

Cotton Valley Gas Play

Deep Bossier Gas Play

Tyler

Texas

Bone Spring Play

Avalon Play

MidlandOdessa

Wolfberry Play

Shreveport

Houston

Eagle Ford Shale

Lafayette

Tuscaloosa Marine Shale Play

EAGLE FORD

TUSCALOOSA MARINE

HAYNESVILLE

WOLFBERRY

BONE SPRING

AVALON

Pleasanton

Wilcox / Lobo Trends

BAKKEN

FAYETTEVILLE

San Jaoquin Basin(medium – shallow drilling)

Los Angeles

San Francisco

N. California Gas Play

Geothermal

WAMSUTTER

PINEDALE

PICEANCEUNITA

NIOBRARA

Casper

Cheyenne

Denver

Williston

Bismarck

Bakken Play

Sanish Three Forks

MARCELLUS

UTICA

Utica Shale (below Marcellus)

Marcellus Shale

OKCCANA

WOODFORD

WOODFORDGRANITE WASH

MISSISSIPPIAN

LIME

Major US Unconventional Basins

NCPS Districts

250 Rigs Un-conventional

VACA MUERTA EAGLE FORDMARCELLUSHORN RIVER BARNETT HAYNESVILLE

2352 FT 600 FT 498 FT 351 FT 298 FT 219 FT

Comparison of Shale Thickness

Vaca Muerta is ~7 times Thicker than Eagle Ford Play

OIL

DRY GAS

EAGLE FORD SHALE BASIN

• X-Ray Diffraction (XRD)• Total Organic Content (TOC)• Pressure/Volume/Temperature (PVT)• Embedment• Geo-Mechanical

If <YM = SoftIf >YM = Brittle

• Desorption Analysis

Understanding the Shale Reservoir

Total Improved Production and EUR depend on:

• Complex Fracture Geometry

• Optimal Perforation Techniques

• Stress Contrasts

• Fluid Leak-Off

• Natural Fractures

• Layering

• Brittleness

• Young Modulus

The Importance of Understanding the Reservoir

Laboratory Services & Testing

Sample Depth (ft) Lithology Classification

No. (modified Dunham, 1962)

1 10170.50 Calcareous Mudrock N/A2 10174.40 Calcareous Mudrock N/A3 10183.70 Calcareous Mudrock N/A4 10189.50 Argillaceous Limestone Foraminiferal Packstone

5 10192.40 Calcareous Mudrock N/A6 10195.50 Calcareous Mudrock N/A7 10201.50 Argillaceous Limestone Foraminiferal Packstone

8 10213.55 Calcareous Mudrock N/A9 10219.50 Mudrock N/A10 10221.80 Claystone / Calcareous Mudrock N/A

11 10225.50 Mudrock / Calcareous Mudrock N/A

12 10241.50 Mudrock / Calcareous Mudrock N/A

Samples Examined

Courtesy of Southern Bay Energy

Frac Fluid Design Based on:

• Inductive Coupled Plasma (ICP)

• PMAC Scale Modeling System

• Microbiological Analysis

• Standard Titrations

• Field Tests

• Post Job Analysis of Produced Water

• 5 Clusters

• Reduced Spacing to 1 Ft

• 4 SPF (all deep penetrating)

• Run RA Tracers (Ir, Sc, Sb)

• Drilled-Out Frac Plugs & Log the Interval

Perforating and Fracture Initiation

20 Holes – Limited Entry

25# Crosslinked Hybrid – Eagle Ford

Conclusions

• Formation Evaluation & Core Data correlation will enhance best frac design.

• Each shale formation is unique in geo-chemistry, petrology, brittleness, ductility, complexity, mineralogy. All must be understood to select the right fluid rheology.

• There is no a single approach to complete all shale formations.

• Mineral deposits and geochemical precipitates including scale, can be prevented by using the right blend of chemicals.

• Limited-entry and deep-penetrating shots have proven effective at reducing fracture initiation pressures, lower breakdown pressures and “smoother” treatment.

• Maximizing the Stimulated Rock Volume (SRV) can be obtained through limited- entry perforating designs.

• Smaller diameter holes create additional friction pressure aiding in fracture diversion.

• Frac treatment must be designed depending if the well will produce oil or gas.

Thank You !!!

For more Information Contact:

[email protected]