e BC 1200

RDW Vehicle Technology Division

.,

THE NETHERLANDS(NEDERLAND)

a:tD-EC TYPE-APPROV AL CERTIFICATE

Communication conceming the:

- type approval- extension of type-approval- refusal af type appf0val- wi-thc:Wawalaf type approval

of a type of a component with regard to Directive 94/20/EC.

Type-approval num ber (1) : e4*94/20*94/20*2508*Ol

Reason for extension . constructive modifications

Approval mark . e4 00-2508

0.1.

SECTION I

Make (trade name ofmanufacturer) : STEELPRESS

0.2. Type and general commercialdescription(s) : BC-1200, coupling head

0.3. Means of identification of type, ifmarked on the '/ehiele/component/separat-eteelmieal unit (2) . Make (trade name) and type

0.3.1. Location of that marking . on housing

0.5. Name and address ofmanufacturer : STEELPRESS Sp. z 0.0.ul. Powstancow Wielkopolskich 48PL-62-031 Lubon -Poznano

07. In the case of components and separatetechnical units, location and method ofaffixing of the EEC approval mark : on housing, data stamped

P.o. Box 777

2700 AT Zoetenneer

The N etherlands

Vehicle Approval and InformationTel. + 31 (0)793458143

Fax + 31 (0)79 345 8043www.rdw.nl

Couplings-component 94.20-94.20 v4.00 Page l oj3

Couplings-component 94.20-94.20 v4.00 Page 2 of3

Type-approval number: e4*94/20*94/20*2508*Ol

0.8. Name(s) and address(es) ofassemb1yp1ant(s) : see information document (Annex Ill),

item 0.8

SECTION fi

1. Additiona1information (whereapplicab1e) : see Appendix I

2. Technical service responsib1e forcarrying out the tests . DEKRA Automobil GmbH

Automobil Test CenterSenftenberger StraBe30D-O1998 Klettwitz

. 30-5-2007

. 200411339 Extension 01

: see Appendix I

. Zoetermeer

9. The index to the information package lodged with the competent authority that has grantedtype-approva1, which may be obtained on request, is attached:-Application form re1ating to Annex ITIand annexed drawings.- Drawings and instructions for attachment.- Fittinginstructions.

(1) The EEC type-approval number appearing on this document shall consist of all sections outlined in Annex vn to Directive 70/1 56/EEC,as last amended by Directive 92/53/EEC. The component itself shall be marked as prescribed in the relevant separate Directive.

(2) lf the means of identification oftype contains characters not relevant to describe the vehicle, component or separate technical unit typescovered by this type-approval certificate such characters shall be represented in the documentation by the symbol: "?" ( e.g.ABC??l23??).

3. Date of test report

4. Number of test report

5. Remarks (if any)

6. Place

7. Date

8. Signature

APPENDIX I

to EEC type-approval certificate number: e4*94/20*94/20*2508*Ol

conceming the component type-approval of mechanical coupling devices with regard to Directive94/20/EC.

1. Additional information

1.1. Class of the type of coupling : B50-X

1.2. Categones or types of vehicles forwhich the device is designed orrestncted : see instructions for attachment and use

Maximum D-value (1)1.3.

1.4. Maximum verticalload S at thecoupling point (1)

1.5. Maximum load U at the fifth wheelcoupling point (1)

Maximum V-value (1)1.6.

1.7. Instructions for attachment of thecoupling type to the vehicle andphotographs or drawings of the fixingpoints at the vehicle given by themanufacturer; additional information ifthe use of the coupling type isrestncted to special types of vehicles : see instructions for attachment and use

1.8. Information on the fitting of specialtowing brackets or mounting plates (1) : not applicable

Remarks (2)5. : The installation of the coupling device on thevehicle must be checked according to therequirements given in Annex VII (see Annex IParagraph 5.10.)

(1)Delete where not applicable.

(2)Including information as to whether fifth wheel couplings are unsuitable for positive steering.

..

Couplings-component 94.20-94.20 v4.00 Page 3 oj3

: 11,3 kN

: 100 kg

tonnes

kN