This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Ver.1.01 DS1016 Quick Start Guide
1 Hardware Quick Start 1.1 Location of Control Box
The following drawing is the top view of control and power space allocation under the display.
Maintenance /Power Outlet
Maintenance /Air Con. tube
Power Control /
Space DVI&
RS-2
32/
AC/D
C
Maintenance
Front Side
Open here Open here
Open here
Lock
Lock
Maintenance
#A
#B
#C#1
#2
#3
#4
#5
#6
Maintenance /Power Outlet
Maintenance /Air Con. tube
Power Control /
Space DVI&
RS-2
32/
AC/D
C
Maintenance
Front Side
Open here Open here
Open here
Lock
Lock
Maintenance
#1
#2
#3
#4
#5
#6
#A
#B
#C
There are 3 external doors available to open. The computer /player with DVI output can be put in the spare space (#1), and connect to DVI & RS-232 panel (#5).
1.3 Air Conditioner Power Connection 2. Secure the 7 wires with marks from power control
base as shown below.
15A Circuit Breaker Power Switch for air con. A
RJ-45 network cable adapter
Red line from power control base (A/C A L)
2 black lines from power control base (A/C A N)
There are two wiring boxes fixed under the top in the
air con. base, and the below one locates on the left for
air con. A connection.
1. Secure the wires marked as below from the
power control base on the terminal block. (3
power cords for air con. A)
Function Air con. B Power Color L (Red) N (Black) Mark A/C B L A/C B N
Function Air con. A control Color 1 (White) 2 (Black)(2 Lines)Mark A/C A 1 A/C A 2
Function Air con. B control Color 1 (White) 2 (Black) Mark A/C B 1 A/C B 2
3. Turn on the power switch of air con. A after finishing the wiring.NOTE: Please be sure to keep the power switch of air con. A on when operating to cool the power control base
chamber.
CAUTION: If the power switch of air con. A were not on, the power control base chamber will be over-heated.
2 Function / Maintenance Introduction2.1 Monitor System Operation
2.1.1 Start Program Follow the path (Program Files -> DynaScan Monitor System 2007 -> MonitorSystem2007); an icon shall appear at the right of the task bar near the clock. Right click on this icon, and then choose <Restore> to activate
the operation window.
As action 1, right click the mouse at the display list to
show the “Pop Menu”. Press “New” to show the
“Append” dialogue as action 2. Enter the name and
model of the display and the RS232 Port used into the
“Machine Data” field in the “Option Page”, then click
If you want to lift the display, you must disassemble the display with the base first. To lift the display, you need to install the eyebolt on the triangle hanging frame and use the lifting device.
NOTE: For more instruction of Display lifting, please refer to the complete version
user manuals provided in the Disc.
Move the display
If you want to move the display, you must use a hand pallet truck.
Caution: When you use a hand pallet truck to move the display, please move it carefully and slowly.
Caution: Please be sure that the screws and connecting pipes and cables between the display and the air
conditioner base are removed and disconnected completely.
Caution: Please make sure that you fasten the eyebolt firmly, or the eyebolt
may not carry the display’s weight and the display will fall down
3.2 Legal Notices Intel lectual property; limited license to users The hardware and software of our products are protected by copyr ight , t rademark, patent , and/or other intel lectual property laws, and any unauthor ized use of the software, t rademarks containing herein may violate such laws and the software l icense agreement. Except as expressly provided herein, DynaScan and i ts suppl iers do not grant any express or impl ied r ights to use any product re lated hardware and software. DynaScan is registered trademark of DynaScan Technology Corp. in R.O.C and\or other countr ies. Microsoft is registered trademark of Microsoft Corp. Moonl ight is registered trademark of Moonl ight cordless Ltd. IBM is registered trademark of IBM Corporat ion. Other t rademarks are trademarks of their respect ive owners. Disclaimer Speci f icat ions and information contained herein are furnished for informational use only. Revisions are periodically made to the information herein; these revisions will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time and are subject to change without notice, and should not be construed as a commitment made by DynaScan. This manual could include mistyping or typographical errors. DynaScan assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Exclusion of Damages:
DynaScan Technology Corporat ion’s l iabi l i ty is l imi ted to the cost of repair or replacement of the product.
DynaScan Technology Corporat ion shal l not be l iable for : 1. Damages to other property caused by any defect in the product, damages based upon
inconvenience, loss of use of the product, loss of t ime, loss of prof i ts , loss of business opportuni ty, loss of goodwi l l , interference with business relat ionships, or other commercial loss, even i f advised of the possibi l i ty of such damages.
2. Any other damages, whether inc idental , consequent ia l or otherwise. 3. Any cla im against the customer by any other party.