TECHNICAL SPECIFICATION KEY FEATURES Coverage area 6 180 x 2 100 mm Hydraulic rock drill 1 x H200, 10 kW Bolting head 1 x TUC, (5’ to 10’) Boom 1 x B26XLB Turning width (T-section) 4 510 mm (with TUC5) Transport width 2 020 mm Transport height (canopy) 2 140 mm / 3 100 mm Transport height (cabin) 2 920 mm or 2 670 mm Transport length 11 530 mm (with TUC5) Total weight 15 000 - 18 000 kg depending on options DS311D ROCK SUPPORT BOLTER Sandvik DS311D is a one-man-operated electro- hydraulic rock bolter for rock reinforcement in underground mines with small and medium cross sections. The operator works below supported ground while protected under a FOPS / ROPS certified cabin structure. Mechanization of the bolting process ensures efficient, constant and durable rock bolt integrity. Built from proven and reliable components, Sandvik DS311D is designed for high availability. Its core is the reputable Hydrastar 200 rockdrill, which enables a high drilling performance. Versatility is also one of the rock bolter’s key characteristics. Sandvik DS311D can install most common rock bolts ranging in length from 1.5 to 3 meters (5 to 10 feet). This version of Sandvik DS311D drills is powered by diesel engine with low emissions (Tier 3 or Tier 4F in option), makes it the ideal drill rig for rehabilitation rock reinforcement in areas where electrical power is not available. The standard unit requires a water supply from the mine network, however a water tank, onboard compressor and dust collector options enables the rock bolter to operate independently. 1. SANDVIK DS311D - ROCK SUPPORT BOLTER
4
Embed
DS311D ROCK SUPPORT BOLTER · *Safety canopy *Low cabin Cabin heating Cabin audio system Safety grill FOPS (ISO 3449) FOPS / ROPS certification Height 2 670 mm, During drilling and
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TECHNICAL SPECIFICATION
KEY FEATURES
Coverage area 6 180 x 2 100 mm
Hydraulic rock drill 1 x H200, 10 kW
Bolting head 1 x TUC, (5’ to 10’)
Boom 1 x B26XLB
Turning width (T-section) 4 510 mm (with TUC5)
Transport width 2 020 mm
Transport height (canopy) 2 140 mm / 3 100 mm
Transport height (cabin) 2 920 mm or 2 670 mm
Transport length 11 530 mm (with TUC5)
Total weight15 000 - 18 000 kg depending on options
DS311DROCK SUPPORTBOLTER
Sandvik DS311D is a one-man-operated electro-hydraulic rock bolter for rock reinforcement in underground mines with small and medium cross sections.
The operator works below supported ground while protected under a FOPS / ROPS certified cabin structure. Mechanization of the bolting process ensures efficient, constant and durable rock bolt integrity. Built from proven and reliable components, Sandvik DS311D is designed for high availability. Its core is the reputable Hydrastar 200 rockdrill, which enables a high drilling performance. Versatility is also one of the rock bolter’s key characteristics. Sandvik DS311D can install most common rock bolts ranging in length from 1.5 to 3 meters (5 to 10 feet).
This version of Sandvik DS311D drills is powered by diesel engine with low emissions (Tier 3 or Tier 4F in option), makes it the ideal drill rig for rehabilitation rock reinforcement in areas where electrical power is not available. The standard unit requires a water supply from the mine network, however a water tank, onboard compressor and dust collector options enables the rock bolter to operate independently.
1. SANDVIK DS311D - ROCK SUPPORT BOLTER
BOOM
Type of boom B26XLB (TS2-207)
Boom extension 1 700 mm
Boom weight, net 1 500 kg
Roll-over angle 360°
HYDRAULIC SYSTEM
Powerpack Diesel engine 95 kW
Filtration size (pressure / return) 20 µ / 10 µ
Oil tank volume 330 liters
Oil tank filling pump Electric
Cooler for hydraulic oil OA30 oil-to-air (30 kW)
Set of tools Specification TS2-429
HYDRAULIC ROCK DRILL
Type of rock drill H200 (TS2-234)
Percussion power 10 kW
Percussion pressure Max. 200 bar
Percussion rate 40 - 65 Hz
Rotation speed Max. 300 rpm
Rotation torque Max. 420 Nm
Hole size 33 - 41 mm
Recommended rod R32 - H25 - R25
Shank adapter R32 (female)
Weight 95 kg
Filling device for accumulators Specification TS2-430
AIR AND WATER SYSTEM
Flushing of holes By water
Water booster pump type WBP1 hydraulic driven
Water pump capacity33 l/min at 15 bar (input pressure = 4 bar)
Water pump inlet pressure 2 bar (Min.)
Flushing water pressure 10 - 15 bar
Shank lubrication device SLU1 (Air / oil mist)
Air compressorCTN10H hydraulic driven, 1 m³/min (7 bar)
Oil consumption 100 g/h
Air consumption 250 l/min
CONTROL SYSTEM
Type of control system THC560 (TS2-361)
Operating principle Hydraulic control
Drilling anti-jamming Automatic
Drilling rotation speed Adjustable at control panel
Drilling feed thrust pressure Adjustable at control panel
Drilling percussion pressureReduced for collaringFull for drilling (adjustable)
Drilling water flushing Automatic with percussion start
Drilling water / air flushing Manual selection
Bolting feed thrust pressure Dedicated bolt system (split set)
Bolting rotation speed Adjustable
Bolting tightening torque Adjustable
MySandvik insight Remote monitoring system
ELECTRIC SYSTEM
Main switch gear MSE 5 (24 V)
IP classification Specification TS2-132
Sealed AGM batteries 2 x 12 V, 95 Ah
Front lights (combined working and driving)
4 x 50 W LED (4 200 lm, 6 000 K)
Rear lights (combined working and driving)
4 x 50 W LED (4 200 lm, 6 000 K)
Search light
Remoted with cabin:1 x 40W LED (2 300 lm, 5 700 K)Manual with canopy:1 x 17W LED (600 lm, 6 000K)
Rear brake / parking lights 2 x Red LED
OPERATOR’S SAFETY CABIN
Standard cabinFOPS / ROPS (ISO 3449 / 3471)Height 2 920 mm
Operation Standing drilling, seated tramming
Sound pressure level according to EN 16228
Operator station: 80 dB(A)
Operator’s seat Ergonomic T-back seat
Air conditioning Cooling only
Tramming cameras On rear frame and cabin or canopy
FOPS (ISO 3449)FOPS / ROPS certificationHeight 2 670 mm, During drilling and tramming CD player / radio / MP3 / Bluetooth and loudspeakers For canopy or cabin
Fire suppression systemSpare hand held fire extinguisherManual or automatic system Auto. fire suppression system
1 x 6 kg (type ABC) Ansul, 6 nozzles (TS2-460) Sandvik Eclipse™ (TS2-461)
Carrier*Diesel engine
*Foam filled tires Fast filling system Brake release Wheel chocks and holders
Deutz TCD2012, 96 kW, Tier 3, Stage IIIA, Canmet, China 2 Deutz TCD3.6, 100 kW, Tier 4F, Stage IV, Canmet 4 pcs Complete Manual hand pump 2 Sets
Extra Items Spare rock drill Spare wheel assembly Special tools for rock drill Warranty extension Documentation Package: Country specific options *Package: Harsh water
H200 Air or foam filled tire H200 One year (excl. Kazakhstan) Extra paper, Catbase or PDF manuals LAM, USC, AUS, CE package Basic or advanced (TS2-049)
*) Replaces standard feature
OPTIONAL FEATURES AND PACKAGES
Hydraulic rock drill*RHR50 rotary drill
Instead of H200 (drilling line)
Boom*Type of boom
B26B boom instead of B26XLB
Bolting head*Type of bolting head
SBH instead of TUC (TS2-208)
Bolting option *Bolting alternatives *“In the hole” resin cartridges injection *H200 rock drill i/o HH200 Two bolt lengths carousel Screen handler Bolting head oiler
GCR, GCC, WI, S, M For GCR bolting system For S bolting system For bolting head 10’ and 8’ On the main boom (TS2-355) with hooks for mesh on carrier side For BC and BCS system (TS2-291)
Drilling control systemAccess detector systemAccess protector systemDrilling safety MySandik productivity
Mandatory in Europe (TS2-211) Mandatory in Canada (TS2-211) Boom movements isolation switch Remote monitoring system
Electric system Battery jump start Amber flashing light
Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
All dimensions in mm
4 010
5 070
5 215
6 770
SANDVIK SANDVIK
* With low cabin option ** With Sandvik Eclipse™ option *** With air receiver option