This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Drilling Systems (UK) Ltd Hurn View House, 5 Aviation Park West, Bournemouth International Airport, Dorset, BH23 6EW, UK
Tel : +44 1202 582255 Fax : +44 1202 582288 Email : [email protected] Web : www.drillingsystems.com
CONFIDENTIAL
This Document is confidential to Drilling Systems and the Customer. Neither the whole nor any part of this document may be disclosed to any third party without the prior written consent of Drilling Systems, Hurn View House, 5 Aviation Park West, Bournemouth International Airport, Dorset, BH23 6EW United Kingdom. The copyright of this document is vested in Drilling Systems. All rights reserved. Neither the whole nor part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the copyright owner.
Please complete the following information about your Company and Contact details, then review the checklist below, selecting the options required. Once complete, please sign and fax back to the Sales and Marketing Department on +44 1202 582288.
S5A Temperature Gauge Scales Dual: Deg C and Deg F √
Ref Question Customers Response
Drilling Systems
(Use Only)
X Access
Please be aware of the size and weight of the simulator components (see Appendix 1 of this document) and answer the following questions
X1 Please confirm the suitability of access into the building
X2 Please confirm the suitability of access through the building
X3 Please confirm the suitability of access into the simulator room
X4
Our Installation Engineers often work outside of standard office hours, ie into the evenings and at weekends. Please confirm if this level of access is available.
X5
Does the Installation Site adopt any special procedures for third-party contractors, i.e. Permit to Work, Security Clearances, Photo ID etc?
Y1 Please confirm the suitability of the room floor to take the weight of the units selected.
Y2 Please confirm the suitability of the room floor to take the height of the units selected.
Y3
Please provide the dimensions of the simulator room (with digital photographs if available). On receipt, we will confirm the space requirement and provide a provisional layout for the components selected that will meet industry certification standards. If possible, please provide a quick sketch of the room identifying any features which may obstruct or be concealed by the simulator installation, for example doors and windows, emergency exits & equipment, power points, ventilation controls etc.
Z Room Provisions
To provide a high level of remote support and future upgrades, Drilling Systems requires either of the following, so please confirm their availability:-
Z1 VPN (Virtual Private Network)
Z2 Direct Dial Modem Line (i.e. not through a central switchboard)