Drilling System - Kennametal · Drilling System 18298 409CATUSAV1 ... ATI Stellram’s new HARDCORE technology offers a unique design so that the optimum carbide grade is used at

ATI Stellram tooling systems forall your drilling requirements.

Drilling System

18298 409CATUSAV1.qxp 6/11/06 9:28 am Page i

• Stainless steels, titanium and titanium alloys,nickel based alloys, silicon electrical steels,armor materials and tool steels.

• Titanium based alloys, nickel based and cobalt based alloys, specialty alloys.

• Zirconium, hafnium, niobium, titanium alloys.

• Gray and ductile iron casting. • Carbon and alloy steel forgings. • Specialised machining and finishingfor titanium mill products.

The ATI Advantage

SOLUTIONS FOR DIFFICULT TO MACHINE MATERIALS

All ATI Stellram’s products aresupported by a highly technical sales

team backed by an extensivecustomer care policy.

Please contact us for additionalinformation on any of the products

illustrated in this catalog or any other part of ATI Stellram’s

comprehensive tooling programme.

www.atistellram.com

TOLL FREE CUSTOMER SERVICE

UNITED STATESTEL: 800 232 1200FAX: 800 223 2219

CANADATEL: 800 668 6928FAX: 800 432 6227

MEXICOTEL: 011 877 756 0947FAX: 011 877 285 2505

18298 409CATUSAV1.qxp 6/11/06 9:28 am Page ii

The TechnologyTwo grades of carbide in one tool can mean as much as four times the performance.

ATI Stellram is positioned to change the way the metal cutting industry thinks, with a brand new patentedtechnology that combines two grades of carbide into one tool. (US Patent: 6,511,265 and foreign pending)

ATI Stellram’s new HARDCORE technology offers a unique design so that the optimum carbide grade is usedat critical points, enhancing performance and improving tool life.

1

One carbide grade hereAnother in the centre

HARDCORE technology eliminated the need for compromise, dramatically improving performance.

The AdvantagesHARDCORE technology drills will cut faster, last longer and produce up to 4 times the number of holes,with better surface quality, than any other high performance drill available in today’s market.

The PerformanceThe outer edges of a drill bit are running at tremendous speed, while the point is basically stationary. Thecarbide grade chosen had to compensate for this and there was a compromise – performance for durability.In the past, this has meant that the bit is prone to chipping at certain points, which is a critical factor inmaintenance and reduced tool life.

The HARDCORE technology consists in having two grades of carbide – one tailored to the high speed of thetool’s outer diameter and another resilient enough to handle the slow speed of the tool centre.

Testing shows that the new hardcore technology greatly reduces wear. And because the carbide grade isoptimised for the different portions of the tool, operating speeds can be increased.

We’ve tested HARDCORE technology by ATI Stellram against some of the best products in the business andthe results are astounding.

Figure 1. Shows chipping along the cutting edge, on a reputable high performance drill that is currently in themarket, after just 8 minutes into its drilling cycle.

Figure 2. ATI Stellram HARDCORE technology drill shows uniform wear along the cutting edge after continuoususe, running at a higher surface speed and feed.

Mono Block Carbide HARDCORE Technology

Fig. 2Fig. 1

18298 409CATUSAV1.qxp 6/11/06 9:28 am Page 1

2

The HARDCORE Material• Patented process for the substrate design and process, manufactured by ATI Stellram (US Patent: 6,511,265).

• Unique bonding of 2 micrograin carbides.

• ATI Stellram’s patented process allows the two micrograin substrates to be co-extruded around each other toproduce optimum grades positioned at the critical parts of the tool to improve durability and allow fasteroperation.

• This allows the HARDCORE technology drill to penetrate materials at higher feed rates than existing highperformance drills available in the market today.

• The technology eliminates the risk of drill point breakage, which is typical for these at high speeds and feeds,due to the variance in surface speeds between periphery and the point.

Material application example:Customer C.Drill: SHD1050/0.413/301 HA HCT600

Material 4140 300HBN, Drilling depth: 33mmVc: 91m/min 295fpmf: 0.25mm/tr 0.01ipr Vf: 680mm/min 26.8ipm814 holes 36 minutes

Tough core ensures shockresistance

High hardness improves wear resistance

– Technology


– Drill Description

Features

3

Excellent designed flute profilefor best chip evacuation

Accurate “ground” edge preparation

140º point angle geometryproduced to “zero” run out

Grade: HCT600

• TiAlN structure Nano

• Thickness 4 microns

• Wear resistance and limitationof the temperature diffusion

• Unique design in the market.

• The combination of the unique HARDCORE material, the specially designed tool geometry and a precisegrinding process provides a tremendous productivity increase.


– Nomenclature

4

S H D 0317 / 0.125 / 301 HA HCT600

StellDrill HARDCORE Series 301

Type Diameter mm Diameter inch Series Ratio according DIN6537K Shank Grade

S H D 0317 / 0.125 / 501 HE HCT600

StellDrill HARDCORE Series 501

Type Diameter mm Diameter inch Series Ratio according DIN6537L Shank Grade

Please note: the shank description is in accordance with DIN6535.

HA = cylindrical shank

HE = inclined clamping flat / whistle notch

HAK = cylindrical shank internal coolant holes

HEK = inclined clamping flat / whistle notch internal coolant holes

d1 ≤ 3 + 0,012 / + 0,002d1 3 ≤ 6 + 0,016 / + 0,004d1 6 ≤ 10 + 0,021 / + 0,006d1 10 ≤ 16 + 0,025 / + 0,007

Drill tolerance – metric

Drilling tolerances Common standard: DIN 6537

Shank tolerance: (d2) h6

Drill tolerance: (d1) m7

Hole tolerance: IT 8 - 9

Surface quality: Ra 1 - 2

By drilling low carbon steel or stainless steel, the surface quality may be slightly inferior.

d1 ≤ 0,118 + 0,000472 / + 0,0000787d1 0,118 ≤ 0,236 + 0,000623 / + 0,000157d1 0,236 ≤ 0,394 + 0,000827 / + 0,000236d1 0,394 ≤ 0,630 + 0,000984 / + 0,000275

Drill tolerance – inch


– Series 301

N

Material Designations

High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

5

Drill Drill d2EDP# Description Grade Diameter Diameter Drills for d2 mm inch l1 l1 l2 l2 l3 l3 l4 l4

d1 mm m7 d1 inch m7 Threads Shank Shank mm inch mm inch mm inch mm inch

029735 SHD0300/0.118/301HA HCT600 3,00 0,118 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029736 SHD0300/0.118/301HE HCT600 3,00 0,118 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029737 SHD0310/0.122/301HA HCT600 3,10 0,122 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029738 SHD0310/0.122/301HE HCT600 3,10 0,122 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029739 SHD0317/0.125/301HA HCT600 3,17 1/8 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029740 SHD0317/0.125/301HE HCT600 3,17 1/8 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029741 SHD0320/0.126/301HA HCT600 3,20 0,126 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029742 SHD0320/0.126/301HE HCT600 3,20 0,126 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029743 SHD0330/0.130/301HA HCT600 3,30 0,130 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029744 SHD0330/0.130/301HE HCT600 3,30 0,130 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029745 SHD0340/0.134/301HA HCT600 3,40 0,134 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029746 SHD0340/0.134/301HE HCT600 3,40 0,134 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029747 SHD0350/0.138/301HA HCT600 3,50 0,138 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029748 SHD0350/0.138/301HE HCT600 3,50 0,138 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029749 SHD0357/0.140/301HA HCT600 3,57 9/64 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029750 SHD0357/0.140/301HE HCT600 3,57 9/64 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029751 SHD0360/0.142/301HA HCT600 3,60 0,142 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029752 SHD0360/0.142/301HE HCT600 3,60 0,142 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029753 SHD0370/0.146/301HA HCT600 3,70 0,146 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029754 SHD0370/0.146/301HE HCT600 3,70 0,146 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417

029755 SHD0380/0.150/301HA HCT600 3,80 0,150 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029756 SHD0380/0.150/301HE HCT600 3,80 0,150 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029757 SHD0390/0.154/301HA HCT600 3,90 0,154 10-24 UNC 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029758 SHD0390/0.154/301HE HCT600 3,90 0,154 10-24 UNC 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029759 SHD0397/0.156/301HA HCT600 3,97 5/32 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029760 SHD0397/0.156/301HE HCT600 3,97 5/32 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029761 SHD0400/0.157/301HA HCT600 4,00 0,157 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029762 SHD0400/0.157/301HE HCT600 4,00 0,157 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029763 SHD0410/0.161/301HA HCT600 4,10 0,161 10-32 UNF 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029764 SHD0410/0.161/301HE HCT600 4,10 0,161 10-32 UNF 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029765 SHD0420/0.165/301HA HCT600 4,20 0,165 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029766 SHD0420/0.165/301HE HCT600 4,20 0,165 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029767 SHD0430/0.169/301HA HCT600 4,30 0,169 M5 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029768 SHD0430/0.169/301HE HCT600 4,30 0,169 M5 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029769 SHD0437/0.172/301HA HCT600 4,37 11/64 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029770 SHD0437/0.172/301HE HCT600 4,37 11/64 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029771 SHD0440/0.173/301HA HCT600 4,40 0,173 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029772 SHD0440/0.173/301HE HCT600 4,40 0,173 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029773 SHD0450/0.177/301HA HCT600 4,50 0,177 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029774 SHD0450/0.177/301HE HCT600 4,50 0,177 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

140º d 1

l2

l3

l1

l4

d2

HARDCORE Drill Series 301





– Series 301Continued..

6N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

029775 SHD0460/0.181/301HA HCT600 4,60 0,181 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029776 SHD0460/0.181/301HE HCT600 4,60 0,181 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029777 SHD0470/0.185/301HA HCT600 4,70 0,185 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029778 SHD0470/0.185/301HE HCT600 4,70 0,185 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417

029779 SHD0476/0.187/301HA HCT600 4,76 3/16 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029780 SHD0476/0.187/301HE HCT600 4,76 3/16 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029781 SHD0480/0.189/301HA HCT600 4,80 0,189 12-32 UNF 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029782 SHD0480/0.189/301HE HCT600 4,80 0,189 12-32 UNF 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029783 SHD0490/0.193/301HA HCT600 4,90 0,193 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029784 SHD0490/0.193/301HE HCT600 4,90 0,193 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

030363 SHD0500/0.197/301HA HCT600 5,00 0,197 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029785 SHD0500/0.197/301HE HCT600 5,00 0,197 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029786 SHD0510/0.201/301HA HCT600 5,10 0,201 M6 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029787 SHD0510/0.201/301HE HCT600 5,10 0,201 M6 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029788 SHD0516/0.203/301HA HCT600 5,16 13/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029789 SHD0516/0.203/301HE HCT600 5,16 13/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029790 SHD0520/0.205/301HA HCT600 5,20 0,205 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029791 SHD0520/0.205/301HE HCT600 5,20 0,205 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029792 SHD0530/0.209/301HA HCT600 5,30 0,209 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029793 SHD0530/0.209/301HE HCT600 5,30 0,209 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029794 SHD0540/0.213/301HA HCT600 5,40 0,213 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029795 SHD0540/0.213/301HE HCT600 5,40 0,213 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029796 SHD0550/0.217/301HA HCT600 5,50 0,217 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029797 SHD0550/0.217/301HE HCT600 5,50 0,217 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029798 SHD0556/0.219/301HA HCT600 5,56 7/32 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029799 SHD0556/0.219/301HE HCT600 5,56 7/32 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029800 SHD0560/0.220/301HA HCT600 5,60 0,220 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029801 SHD0560/0.220/301HE HCT600 5,60 0,220 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029802 SHD0570/0.224/301HA HCT600 5,70 0,224 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029803 SHD0570/0.224/301HE HCT600 5,70 0,224 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029804 SHD0580/0.228/301HA HCT600 5,80 0,228 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029805 SHD0580/0.228/301HE HCT600 5,80 0,228 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029806 SHD0590/0.232/301HA HCT600 5,90 0,232 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029807 SHD0590/0.232/301HE HCT600 5,90 0,232 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029808 SHD0595/0.234/301HA HCT600 5,95 15/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029809 SHD0595/0.234/301HE HCT600 5,95 15/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029810 SHD0600/0.236/301HA HCT600 6,00 0,236 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029811 SHD0600/0.236/301HE HCT600 6,00 0,236 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417

029812 SHD0610/0.240/301HA HCT600 6,10 0,240 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029813 SHD0610/0.240/301HE HCT600 6,10 0,240 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

140º d 1

l2

l3

l1

l4

d2






N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

7

030364 SHD0620/0.244/301HA HCT600 6,20 0,244 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029814 SHD0620/0.244/301HE HCT600 6,20 0,244 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029815 SHD0630/0.248/301HA HCT600 6,30 0,248 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

030365 SHD0630/0.248/301HE HCT600 6,30 0,248 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029816 SHD0635/0.250/301HA HCT600 6,35 1/4 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029817 SHD0635/0.250/301HE HCT600 6,35 1/4 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029818 SHD0640/0.252/301HA HCT600 6,40 0,252 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029819 SHD0640/0.252/301HE HCT600 6,40 0,252 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029820 SHD0650/0.256/301HA HCT600 6,50 0,256 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029821 SHD0650/0.256/301HE HCT600 6,50 0,256 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029822 SHD0660/0.260/301HA HCT600 6,60 0,260 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029823 SHD0660/0.260/301HE HCT600 6,60 0,260 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029824 SHD0670/0.264/301HA HCT600 6,70 0,264 5/18-18UNF 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029825 SHD0670/0.264/301HE HCT600 6,70 0,264 5/18-18UNF 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029826 SHD0675/0.266/301HA HCT600 6,75 17/64 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029827 SHD0675/0.266/301HE HCT600 6,75 17/64 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029828 SHD0680/0.268/301HA HCT600 6,80 0,268 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029829 SHD0680/0.268/301HE HCT600 6,80 0,268 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029830 SHD0690/0.272/301HA HCT600 6,90 0,272 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029831 SHD0690/0.272/301HE HCT600 6,90 0,272 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029832 SHD0700/0.276/301HA HCT600 7,00 0,276 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029833 SHD0700/0.276/301HE HCT600 7,00 0,276 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417

029834 SHD0710/0.280/301HA HCT600 7,10 0,280 MF8x1 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

030366 SHD0710/0.280/301HE HCT600 7,10 0,280 MF8x1 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029835 SHD0714/0.281/301HA HCT600 7,14 9/32 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029836 SHD0714/0.281/301HE HCT600 7,14 9/32 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029837 SHD0720/0.283/301HA HCT600 7,20 0,283 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029838 SHD0720/0.283/301HE HCT600 7,20 0,283 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029839 SHD0730/0.287/301HA HCT600 7,30 0,287 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029840 SHD0730/0.287/301HE HCT600 7,30 0,287 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029841 SHD0740/0.291/301HA HCT600 7,40 0,291 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029842 SHD0740/0.291/301HE HCT600 7,40 0,291 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029843 SHD0750/0.295/301HA HCT600 7,50 0,295 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029844 SHD0750/0.295/301HE HCT600 7,50 0,295 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029845 SHD0754/0.297/301HA HCT600 7,54 19/64 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029846 SHD0754/0.297/301HE HCT600 7,54 19/64 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029847 SHD0760/0.299/301HA HCT600 7,60 0,299 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029848 SHD0760/0.299/301HE HCT600 7,60 0,299 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029849 SHD0770/0.303/301HA HCT600 7,70 0,303 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029850 SHD0770/0.303/301HE HCT600 7,70 0,303 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

140º d 1

l2

l3

l1

l4

d2






8N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

029851 SHD0780/0.307/301HA HCT600 7,80 0,307 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029852 SHD0780/0.307/301HE HCT600 7,80 0,307 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029853 SHD0790/0.311/301HA HCT600 7,90 0,311 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029854 SHD0790/0.311/301HE HCT600 7,90 0,311 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029855 SHD0794/0.313/301HA HCT600 7,94 5/16 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029856 SHD0794/0.313/301HE HCT600 7,94 5/16 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029857 SHD0800/0.315/301HA HCT600 8,00 0,315 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029858 SHD0800/0.315/301HE HCT600 8,00 0,315 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417

029859 SHD0810/0.319/301HA HCT600 8,10 0,319 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029860 SHD0810/0.319/301HE HCT600 8,10 0,319 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029861 SHD0820/0.323/301HA HCT600 8,20 0,323 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029862 SHD0820/0.323/301HE HCT600 8,20 0,323 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029863 SHD0830/0.327/301HA HCT600 8,30 0,327 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029864 SHD0830/0.327/301HE HCT600 8,30 0,327 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029865 SHD0833/0.328/301HA HCT600 8,33 21/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029866 SHD0833/0.328/301HE HCT600 8,33 21/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029867 SHD0840/0.331/301HA HCT600 8,40 0,331 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029868 SHD0840/0.331/301HE HCT600 8,40 0,331 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029869 SHD0850/0.335/301HA HCT600 8,50 0,335 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029870 SHD0850/0.335/301HE HCT600 8,50 0,335 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029871 SHD0860/0.339/301HA HCT600 8,60 0,339 3/8-24 UNF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029872 SHD0860/0.339/301HE HCT600 8,60 0,339 3/8-24 UNF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029873 SHD0870/0.343/301HA HCT600 8,70 0,343 M10 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029874 SHD0870/0.343/301HE HCT600 8,70 0,343 M10 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029875 SHD0873/0.344/301HA HCT600 8,73 11/32 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029876 SHD0873/0.344/301HE HCT600 8,73 11/32 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029877 SHD0880/0.346/301HA HCT600 8,80 0,346 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029878 SHD0880/0.346/301HE HCT600 8,80 0,346 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029879 SHD0890/0.350/301HA HCT600 8,90 0,350 MF10x1,25 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029880 SHD0890/0.350/301HE HCT600 8,90 0,350 MF10x1,25 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029881 SHD0900/0.354/301HA HCT600 9,00 0,354 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029882 SHD0900/0.354/301HE HCT600 9,00 0,354 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029883 SHD0910/0.358/301HA HCT600 9,10 0,358 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029884 SHD0910/0.358/301HE HCT600 9,10 0,358 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029885 SHD0913/0.359/301HA HCT600 9,13 23/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029886 SHD0913/0.359/301HE HCT600 9,13 23/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029887 SHD0920/0.362/301HA HCT600 9,20 0,362 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029888 SHD0920/0.362/301HE HCT600 9,20 0,362 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029889 SHD0930/0.366/301HA HCT600 9,30 0,366 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029890 SHD0930/0.366/301HE HCT600 9,30 0,366 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

140º d 1

l2

l3

l1

l4

d2






N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

9

029891 SHD0940/0.370/301HA HCT600 9,40 0,370 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029892 SHD0940/0.370/301HE HCT600 9,40 0,370 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029893 SHD0950/0.374/301HA HCT600 9,50 0,374 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029894 SHD0950/0.374/301HE HCT600 9,50 0,374 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029895 SHD0952/0.375/301HA HCT600 9,52 3/8 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029896 SHD0952/0.375/301HE HCT600 9,52 3/8 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029897 SHD0960/0.378/301HA HCT600 9,60 0,378 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029898 SHD0960/0.378/301HE HCT600 9,60 0,378 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029899 SHD0970/0.382/301HA HCT600 9,70 0,382 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029900 SHD0970/0.382/301HE HCT600 9,70 0,382 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029901 SHD0980/0.386/301HA HCT600 9,80 0,386 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029902 SHD0980/0.386/301HE HCT600 9,80 0,386 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029903 SHD0990/0.390/301HA HCT600 9,90 0,390 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029904 SHD0990/0.390/301HE HCT600 9,90 0,390 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029905 SHD0992/0.391/301HA HCT600 9,92 25/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029906 SHD0992/0.391/301HE HCT600 9,92 25/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029907 SHD1000/0.394/301HA HCT600 10,00 0,394 7/16-20 UNF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029908 SHD1000/0.394/301HE HCT600 10,00 0,394 7/16-20 UNF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575

029909 SHD1010/0.398/301HA HCT600 10,10 0,398 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029910 SHD1010/0.398/301HE HCT600 10,10 0,398 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029911 SHD1020/0.402/301HA HCT600 10,20 0,402 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029912 SHD1020/0.402/301HE HCT600 10,20 0,402 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029913 SHD1030/0.406/301HA HCT600 10,30 0,406 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029914 SHD1030/0.406/301HE HCT600 10,30 0,406 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029915 SHD1032/0.407/301HA HCT600 10,32 13/32 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029916 SHD1032/0.407/301HE HCT600 10,32 13/32 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029917 SHD1040/0.409/301HA HCT600 10,40 0,409 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029918 SHD1040/0.409/301HE HCT600 10,40 0,409 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029919 SHD1050/0.413/301HA HCT600 10,50 0,413 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029920 SHD1050/0.413/301HE HCT600 10,50 0,413 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029921 SHD1060/0.417/301HA HCT600 10,60 0,417 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029922 SHD1060/0.417/301HE HCT600 10,60 0,417 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029923 SHD1070/0.421/301HA HCT600 10,70 0,421 MF12x1,5 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029924 SHD1070/0.421/301HE HCT600 10,70 0,421 MF12x1,5 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029925 SHD1080/0.425/301HA HCT600 10,80 0,425 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029926 SHD1080/0.425/301HE HCT600 10,80 0,425 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029927 SHD1090/0.429/301HA HCT600 10,90 0,429 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029928 SHD1090/0.429/301HE HCT600 10,90 0,429 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029929 SHD1100/0.433/301HA HCT600 11,00 0,433 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029930 SHD1100/0.433/301HE HCT600 11,00 0,433 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

140º d 1

l2

l3

l1

l4

d2






10N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

029931 SHD1110/0.437/301HA HCT600 11,10 0,437 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029932 SHD1110/0.437/301HE HCT600 11,10 0,437 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029933 SHD1120/0.441/301HA HCT600 11,20 0,441 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029934 SHD1120/0.441/301HE HCT600 11,20 0,441 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029935 SHD1130/0.445/301HA HCT600 11,30 0,445 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029936 SHD1130/0.445/301HE HCT600 11,30 0,445 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029937 SHD1140/0.449/301HA HCT600 11,40 0,449 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029938 SHD1140/0.449/301HE HCT600 11,40 0,449 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029939 SHD1150/0.453/301HA HCT600 11,50 0,453 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029940 SHD1150/0.453/301HE HCT600 11,50 0,453 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029941 SHD1151/0.453/301HA HCT600 11,51 29/64 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029942 SHD1151/0.453/301HE HCT600 11,51 29/64 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029943 SHD1160/0.457/301HA HCT600 11,60 0,457 1/2-20 UNF 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029944 SHD1160/0.457/301HE HCT600 11,60 0,457 1/2-20 UNF 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029945 SHD1170/0.461/301HA HCT600 11,70 0,461 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029946 SHD1170/0.461/301HE HCT600 11,70 0,461 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029947 SHD1180/0.465/301HA HCT600 11,80 0,465 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029948 SHD1180/0.465/301HE HCT600 11,80 0,465 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029949 SHD1190/0.469/301HA HCT600 11,90 0,469 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029950 SHD1190/0.469/301HE HCT600 11,90 0,469 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029951 SHD1200/0.472/301HA HCT600 12,00 0,472 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029952 SHD1200/0.472/301HE HCT600 12,00 0,472 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772

029953 SHD1210/0.476/301HA HCT600 12,10 0,476 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029954 SHD1210/0.476/301HE HCT600 12,10 0,476 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029955 SHD1220/0.480/301HA HCT600 12,20 0,480 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029956 SHD1220/0.480/301HE HCT600 12,20 0,480 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029957 SHD1230/0.484/301HA HCT600 12,30 31/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029958 SHD1230/0.484/301HE HCT600 12,30 31/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029959 SHD1240/0.488/301HA HCT600 12,40 0,488 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029960 SHD1240/0.488/301HE HCT600 12,40 0,488 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029961 SHD1250/0.492/301HA HCT600 12,50 0,492 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029962 SHD1250/0.492/301HE HCT600 12,50 0,492 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029963 SHD1260/0.496/301HA HCT600 12,60 0,496 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029964 SHD1260/0.496/301HE HCT600 12,60 0,496 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029965 SHD1270/0.500/301HA HCT600 12,70 1/2 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029966 SHD1270/0.500/301HE HCT600 12,70 1/2 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029967 SHD1280/0.504/301HA HCT600 12,80 0,504 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029968 SHD1280/0.504/301HE HCT600 12,80 0,504 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029969 SHD1290/0.508/301HA HCT600 12,90 0,508 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029970 SHD1290/0.508/301HE HCT600 12,90 0,508 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

140º d 1

l2

l3

l1

l4

d2






N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

11

029971 SHD1300/0.512/301HA HCT600 13,00 0,512 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029972 SHD1300/0.512/301HE HCT600 13,00 0,512 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029973 SHD1310/0.516/301HA HCT600 13,10 0,516 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029974 SHD1310/0.516/301HE HCT600 13,10 0,516 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029975 SHD1320/0.520/301HA HCT600 13,20 0,520 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029976 SHD1320/0.520/301HE HCT600 13,20 0,520 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029977 SHD1330/0.524/301HA HCT600 13,30 0,524 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029978 SHD1330/0.524/301HE HCT600 13,30 0,524 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029979 SHD1340/0.528/301HA HCT600 13,40 0,528 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029980 SHD1340/0.528/301HE HCT600 13,40 0,528 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029981 SHD1350/0.531/301HA HCT600 13,50 0,531 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029982 SHD1350/0.531/301HE HCT600 13,50 0,531 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029983 SHD1360/0.535/301HA HCT600 13,60 0,535 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029984 SHD1360/0.535/301HE HCT600 13,60 0,535 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029985 SHD1370/0.539/301HA HCT600 13,70 0,539 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029986 SHD1370/0.539/301HE HCT600 13,70 0,539 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029987 SHD1380/0.543/301HA HCT600 13,80 0,543 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029988 SHD1380/0.543/301HE HCT600 13,80 0,543 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029989 SHD1389/0.547/301HA HCT600 13,89 35/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029990 SHD1389/0.547/301HE HCT600 13,89 35/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029991 SHD1400/0.551/301HA HCT600 14,00 0,551 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029992 SHD1400/0.551/301HE HCT600 14,00 0,551 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772

029993 SHD1410/0.555/301HA HCT600 14,10 0,555 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

029994 SHD1410/0.555/301HE HCT600 14,10 0,555 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

029995 SHD1420/0.559/301HA HCT600 14,20 0,559 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

029996 SHD1420/0.559/301HE HCT600 14,20 0,559 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

029997 SHD1429/0.562/301HA HCT600 14,29 9/16 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

029998 SHD1429/0.562/301HE HCT600 14,29 9/16 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

029999 SHD1430/0.563/301HA HCT600 14,30 0,563 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030000 SHD1430/0.563/301HE HCT600 14,30 0,563 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030001 SHD1440/0.567/301HA HCT600 14,40 0,567 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030002 SHD1440/0.567/301HE HCT600 14,40 0,567 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030003 SHD1450/0.571/301HA HCT600 14,50 0,571 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030004 SHD1450/0.571/301HE HCT600 14,50 0,571 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030005 SHD1460/0.575/301HA HCT600 14,60 0,575 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030006 SHD1460/0.575/301HE HCT600 14,60 0,575 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030007 SHD1470/0.579/301HA HCT600 14,70 0,579 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030008 SHD1470/0.579/301HE HCT600 14,70 0,579 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030009 SHD1480/0.583/301HA HCT600 14,80 0,583 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030010 SHD1480/0.583/301HE HCT600 14,80 0,583 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

140º d 1

l2

l3

l1

l4

d2






12N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

030011 SHD1490/0.587/301HA HCT600 14,90 0,587 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030012 SHD1490/0.587/301HE HCT600 14,90 0,587 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030013 SHD1500/0.591/301HA HCT600 15,00 0,591 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030014 SHD1500/0.591/301HE HCT600 15,00 0,591 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030015 SHD1510/0.594/301HA HCT600 15,10 0,594 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030016 SHD1510/0.594/301HE HCT600 15,10 0,594 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030017 SHD1520/0.598/301HA HCT600 15,20 0,598 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030018 SHD1520/0.598/301HE HCT600 15,20 0,598 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030019 SHD1530/0.602/301HA HCT600 15,30 0,602 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030020 SHD1530/0.602/301HE HCT600 15,30 0,602 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030021 SHD1540/0.606/301HA HCT600 15,40 0,606 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030022 SHD1540/0.606/301HE HCT600 15,40 0,606 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030023 SHD1550/0.610/301HA HCT600 15,50 0,610 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030024 SHD1550/0.610/301HE HCT600 15,50 0,610 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030025 SHD1560/0.614/301HA HCT600 15,60 0,614 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030026 SHD1560/0.614/301HE HCT600 15,60 0,614 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030027 SHD1570/0.618/301HA HCT600 15,70 0,618 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030028 SHD1570/0.618/301HE HCT600 15,70 0,618 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030029 SHD1580/0.622/301HA HCT600 15,80 0,622 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030030 SHD1580/0.622/301HE HCT600 15,80 0,622 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030031 SHD1587/0.625/301HA HCT600 15,87 5/8 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030032 SHD1587/0.625/301HE HCT600 15,87 5/8 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030033 SHD1590/0.626/301HA HCT600 15,90 0,626 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030034 SHD1590/0.626/301HE HCT600 15,90 0,626 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030035 SHD1600/0.630/301HA HCT600 16,00 0,630 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

030036 SHD1600/0.630/301HE HCT600 16,00 0,630 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890

140º d 1

l2

l3

l1

l4

d2





– Series 501

N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

13

030037 SHD0300/0.118/501HA HCT600 3,00 0,118 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030038 SHD0300/0.118/501HE HCT600 3,00 0,118 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030039 SHD0310/0.122/501HA HCT600 3,10 0,122 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030040 SHD0310/0.122/501HE HCT600 3,10 0,122 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030041 SHD0317/0.125/501HA HCT600 3,17 1/8 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030042 SHD0317/0.125/501HE HCT600 3,17 1/8 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030043 SHD0320/0.126/501HA HCT600 3,20 0,126 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030044 SHD0320/0.126/501HE HCT600 3,20 0,126 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030045 SHD0330/0.130/501HA HCT600 3,30 0,130 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030046 SHD0330/0.130/501HE HCT600 3,30 0,130 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030047 SHD0340/0.134/501HA HCT600 3,40 0,134 M4 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030048 SHD0340/0.134/501HE HCT600 3,40 0,134 M4 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030049 SHD0350/0.138/501HA HCT600 3,50 0,138 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030050 SHD0350/0.138/501HE HCT600 3,50 0,138 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030051 SHD0357/0.140/501HA HCT600 3,57 9/64 8-36 UNF 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030052 SHD0357/0.140/501HE HCT600 3,57 9/64 8-36 UNF 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030053 SHD0360/0.142/501HA HCT600 3,60 0,142 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030054 SHD0360/0.142/501HE HCT600 3,60 0,142 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030055 SHD0370/0.146/501HA HCT600 3,70 0,146 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030056 SHD0370/0.146/501HE HCT600 3,70 0,146 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417

030057 SHD0380/0.150/501HA HCT600 3,80 0,150 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030058 SHD0380/0.150/501HE HCT600 3,80 0,150 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030059 SHD0390/0.154/501HA HCT600 3,90 0,154 10-24 UNC 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030060 SHD0390/0.154/501HE HCT600 3,90 0,154 10-24 UNC 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030061 SHD0397/0.156/501HA HCT600 3,97 5/32 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030062 SHD0397/0.156/501HE HCT600 3,97 5/32 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030063 SHD0400/0.157/501HA HCT600 4,00 0,157 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030064 SHD0400/0.157/501HE HCT600 4,00 0,157 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030065 SHD0410/0.161/501HA HCT600 4,10 0,161 10-32 UNF 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030066 SHD0410/0.161/501HE HCT600 4,10 0,161 10-32 UNF 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030067 SHD0420/0.165/501HA HCT600 4,20 0,165 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030068 SHD0420/0.165/501HE HCT600 4,20 0,165 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030069 SHD0430/0.169/501HA HCT600 4,30 0,169 M5 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030070 SHD0430/0.169/501HE HCT600 4,30 0,169 M5 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030071 SHD0437/0.172/501HA HCT600 4,37 11/64 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030072 SHD0437/0.172/501HE HCT600 4,37 11/64 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030073 SHD0440/0.173/501HA HCT600 4,40 0,173 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030074 SHD0440/0.173/501HE HCT600 4,40 0,173 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030075 SHD0450/0.177/501HA HCT600 4,50 0,177 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030076 SHD0450/0.177/501HE HCT600 4,50 0,177 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

140º d 1

l2

l3

l1

l4

d2






14N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

030077 SHD0460/0.181/501HA HCT600 4,60 0,181 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030078 SHD0460/0.181/501HE HCT600 4,60 0,181 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030079 SHD0470/0.185/501HA HCT600 4,70 0,185 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030080 SHD0470/0.185/501HE HCT600 4,70 0,185 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417

030081 SHD0476/0.187/501HA HCT600 4,76 3/16 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030082 SHD0476/0.187/501HE HCT600 4,76 3/16 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030083 SHD0480/0.189/501HA HCT600 4,80 0,189 12-32 UNF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030084 SHD0480/0.189/501HE HCT600 4,80 0,189 12-32 UNF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030085 SHD0490/0.193/501HA HCT600 4,90 0,193 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030086 SHD0490/0.193/501HE HCT600 4,90 0,193 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030087 SHD0500/0.197/501HA HCT600 5,00 0,197 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030088 SHD0500/0.197/501HE HCT600 5,00 0,197 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030089 SHD0510/0.201/501HA HCT600 5,10 0,201 M6 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030090 SHD0510/0.201/501HE HCT600 5,10 0,201 M6 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030091 SHD0516/0.203/501HA HCT600 5,16 13/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030092 SHD0516/0.203/501HE HCT600 5,16 13/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030093 SHD0520/0.205/501HA HCT600 5,20 0,205 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030094 SHD0520/0.205/501HE HCT600 5,20 0,205 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030095 SHD0530/0.209/501HA HCT600 5,30 0,209 1/4-20 UNC 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030096 SHD0530/0.209/501HE HCT600 5,30 0,209 1/4-20 UNC 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030097 SHD0540/0.213/501HA HCT600 5,40 0,213 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030098 SHD0540/0.213/501HE HCT600 5,40 0,213 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030099 SHD0550/0.217/501HA HCT600 5,50 0,217 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030100 SHD0550/0.217/501HE HCT600 5,50 0,217 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030101 SHD0556/0.219/501HA HCT600 5,56 7/32 1/4-28 UNF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030102 SHD0556/0.219/501HE HCT600 5,56 7/32 1/4-28 UNF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030103 SHD0560/0.220/501HA HCT600 5,60 0,220 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030104 SHD0560/0.220/501HE HCT600 5,60 0,220 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030105 SHD0570/0.224/501HA HCT600 5,70 0,224 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030106 SHD0570/0.224/501HE HCT600 5,70 0,224 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030107 SHD0580/0.228/501HA HCT600 5,80 0,228 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030108 SHD0580/0.228/501HE HCT600 5,80 0,228 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030109 SHD0590/0.232/501HA HCT600 5,90 0,232 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030110 SHD0590/0.232/501HE HCT600 5,90 0,232 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030111 SHD0595/0.234/501HA HCT600 5,95 15/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030112 SHD0595/0.234/501HE HCT600 5,95 15/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030113 SHD0600/0.236/501HA HCT600 6,00 0,236 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030114 SHD0600/0.236/501HE HCT600 6,00 0,236 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417

030115 SHD0610/0.240/501HA HCT600 6,10 0,240 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030116 SHD0610/0.240/501HE HCT600 6,10 0,240 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

140º d 1

l2

l3

l1

l4

d2






N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

15

030117 SHD0620/0.244/501HA HCT600 6,20 0,244 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030118 SHD0620/0.244/501HE HCT600 6,20 0,244 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030119 SHD0630/0.248/501HA HCT600 6,30 0,248 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030120 SHD0630/0.248/501HE HCT600 6,30 0,248 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030121 SHD0635/0.250/501HA HCT600 6,35 1/4 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030122 SHD0635/0.250/501HE HCT600 6,35 1/4 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030123 SHD0640/0.252/501HA HCT600 6,40 0,252 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030124 SHD0640/0.252/501HE HCT600 6,40 0,252 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030125 SHD0650/0.256/501HA HCT600 6,50 0,256 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030126 SHD0650/0.256/501HE HCT600 6,50 0,256 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030127 SHD0660/0.260/501HA HCT600 6,60 0,260 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030128 SHD0660/0.260/501HE HCT600 6,60 0,260 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030129 SHD0670/0.264/501HA HCT600 6,70 0,264 5/18-18UNF 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030130 SHD0670/0.264/501HE HCT600 6,70 0,264 5/18-18UNF 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030131 SHD0675/0.266/501HA HCT600 6,75 17/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030132 SHD0675/0.266/501HE HCT600 6,75 17/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030133 SHD0680/0.268/501HA HCT600 6,80 0,268 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030134 SHD0680/0.268/501HE HCT600 6,80 0,268 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030135 SHD0690/0.272/501HA HCT600 6,90 0,272 M8 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030136 SHD0690/0.272/501HE HCT600 6,90 0,272 M8 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030137 SHD0700/0.276/501HA HCT600 7,00 0,276 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030138 SHD0700/0.276/501HE HCT600 7,00 0,276 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030139 SHD0710/0.280/501HA HCT600 7,10 0,280 MF8x1 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030140 SHD0710/0.280/501HE HCT600 7,10 0,280 MF8x1 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030141 SHD0714/0.281/501HA HCT600 7,14 9/32 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030142 SHD0714/0.281/501HE HCT600 7,14 9/32 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030143 SHD0720/0.283/501HA HCT600 7,20 0,283 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030144 SHD0720/0.283/501HE HCT600 7,20 0,283 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030145 SHD0730/0.287/501HA HCT600 7,30 0,287 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030146 SHD0730/0.287/501HE HCT600 7,30 0,287 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030147 SHD0740/0.291/501HA HCT600 7,40 0,291 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030148 SHD0740/0.291/501HE HCT600 7,40 0,291 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030149 SHD0750/0.295/501HA HCT600 7,50 0,295 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030150 SHD0750/0.295/501HE HCT600 7,50 0,295 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030151 SHD0754/0.297/501HA HCT600 7,54 19/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030152 SHD0754/0.297/501HE HCT600 7,54 19/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030153 SHD0760/0.299/501HA HCT600 7,60 0,299 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030154 SHD0760/0.299/501HE HCT600 7,60 0,299 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030155 SHD0770/0.303/501HA HCT600 7,70 0,303 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030156 SHD0770/0.303/501HE HCT600 7,70 0,303 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

140º d 1

l2

l3

l1

l4

d2






16N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

030157 SHD0780/0.307/501HA HCT600 7,80 0,307 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030158 SHD0780/0.307/501HE HCT600 7,80 0,307 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030159 SHD0790/0.311/501HA HCT600 7,90 0,311 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030160 SHD0790/0.311/501HE HCT600 7,90 0,311 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030161 SHD0794/0.313/501HA HCT600 7,94 5/16 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030162 SHD0794/0.313/501HE HCT600 7,94 5/16 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030163 SHD0800/0.315/501HA HCT600 8,00 0,315 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030164 SHD0800/0.315/501HE HCT600 8,00 0,315 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417

030165 SHD0810/0.319/501HA HCT600 8,10 0,319 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030166 SHD0810/0.319/501HE HCT600 8,10 0,319 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030167 SHD0820/0.323/501HA HCT600 8,20 0,323 3/8-16 UNC 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030168 SHD0820/0.323/501HE HCT600 8,20 0,323 3/8-16 UNC 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030169 SHD0830/0.327/501HA HCT600 8,30 0,327 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030170 SHD0830/0.327/501HE HCT600 8,30 0,327 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030171 SHD0833/0.328/501HA HCT600 8,33 21/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030172 SHD0833/0.328/501HE HCT600 8,33 21/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030173 SHD0840/0.331/501HA HCT600 8,40 0,331 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030174 SHD0840/0.331/501HE HCT600 8,40 0,331 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030175 SHD0850/0.335/501HA HCT600 8,50 0,335 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030176 SHD0850/0.335/501HE HCT600 8,50 0,335 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030177 SHD0860/0.339/501HA HCT600 8,60 0,339 3/8-24 UNF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030178 SHD0860/0.339/501HE HCT600 8,60 0,339 3/8-24 UNF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030179 SHD0870/0.343/501HA HCT600 8,70 0,343 M10 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030180 SHD0870/0.343/501HE HCT600 8,70 0,343 M10 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030181 SHD0873/0.344/501HA HCT600 8,73 11/32 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030182 SHD0873/0.344/501HE HCT600 8,73 11/32 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030183 SHD0880/0.346/501HA HCT600 8,80 0,346 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030184 SHD0880/0.346/501HE HCT600 8,80 0,346 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030185 SHD0890/0.350/501HA HCT600 8,90 0,350 MF10x1,25 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030186 SHD0890/0.350/501HE HCT600 8,90 0,350 MF10x1,25 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030187 SHD0900/0.354/501HA HCT600 9,00 0,354 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030188 SHD0900/0.354/501HE HCT600 9,00 0,354 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030189 SHD0910/0.358/501HA HCT600 9,10 0,358 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030190 SHD0910/0.358/501HE HCT600 9,10 0,358 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030191 SHD0913/0.359/501HA HCT600 9,13 23/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030192 SHD0913/0.359/501HE HCT600 9,13 23/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030193 SHD0920/0.362/501HA HCT600 9,20 0,362 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030194 SHD0920/0.362/501HE HCT600 9,20 0,362 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030195 SHD0930/0.366/501HA HCT600 9,30 0,366 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030196 SHD0930/0.366/501HE HCT600 9,30 0,366 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

140º d 1

l2

l3

l1

l4

d2






N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

17

030197 SHD0940/0.370/501HA HCT600 9,40 0,370 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030198 SHD0940/0.370/501HE HCT600 9,40 0,370 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030199 SHD0950/0.374/501HA HCT600 9,50 0,374 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030200 SHD0950/0.374/501HE HCT600 9,50 0,374 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030201 SHD0952/0.375/501HA HCT600 9,52 3/8 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030202 SHD0952/0.375/501HE HCT600 9,52 3/8 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030203 SHD0960/0.378/501HA HCT600 9,60 0,378 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030204 SHD0960/0.378/501HE HCT600 9,60 0,378 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030205 SHD0970/0.382/501HA HCT600 9,70 0,382 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030206 SHD0970/0.382/501HE HCT600 9,70 0,382 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030207 SHD0980/0.386/501HA HCT600 9,80 0,386 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030208 SHD0980/0.386/501HE HCT600 9,80 0,386 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030209 SHD0990/0.390/501HA HCT600 9,90 0,390 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030210 SHD0990/0.390/501HE HCT600 9,90 0,390 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030211 SHD0992/0.391/501HA HCT600 9,92 25/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030212 SHD0992/0.391/501HE HCT600 9,92 25/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030213 SHD1000/0.394/501HA HCT600 10,00 0,394 7/16-20 UNF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030214 SHD1000/0.394/501HE HCT600 10,00 0,394 7/16-20 UNF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575

030215 SHD1010/0.398/501HA HCT600 10,10 0,398 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030367 SHD1010/0.398/501HE HCT600 10,10 0,398 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030216 SHD1020/0.402/501HA HCT600 10,20 0,402 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030217 SHD1020/0.402/501HE HCT600 10,20 0,402 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030218 SHD1030/0.406/501HA HCT600 10,30 0,406 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030219 SHD1030/0.406/501HE HCT600 10,30 0,406 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030220 SHD1040/0.409/501HA HCT600 10,40 0,409 M12 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030221 SHD1040/0.409/501HE HCT600 10,40 0,409 M12 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030222 SHD1050/0.413/501HA HCT600 10,50 0,413 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030223 SHD1050/0.413/501HE HCT600 10,50 0,413 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030224 SHD1060/0.417/501HA HCT600 10,60 0,417 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030225 SHD1060/0.417/501HE HCT600 10,60 0,417 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030226 SHD1070/0.421/501HA HCT600 10,70 0,421 MF12x1,5 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030227 SHD1070/0.421/501HE HCT600 10,70 0,421 MF12x1,5 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030228 SHD1080/0.425/501HA HCT600 10,80 0,425 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030229 SHD1080/0.425/501HE HCT600 10,80 0,425 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030230 SHD1090/0.429/501HA HCT600 10,90 0,429 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030231 SHD1090/0.429/501HE HCT600 10,90 0,429 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030232 SHD1100/0.433/501HA HCT600 11,00 0,433 1/2-13 UNC 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030233 SHD1100/0.433/501HE HCT600 11,00 0,433 1/2-13 UNC 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030234 SHD1110/0.437/501HA HCT600 11,10 0,437 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030235 SHD1110/0.437/501HE HCT600 11,10 0,437 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

140º d 1

l2

l3

l1

l4

d2






18N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

030236 SHD1120/0.441/501HA HCT600 11,20 0,441 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030237 SHD1120/0.441/501HE HCT600 11,20 0,441 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030238 SHD1130/0.445/501HA HCT600 11,30 0,445 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030239 SHD1130/0.445/501HE HCT600 11,30 0,445 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030240 SHD1140/0.449/501HA HCT600 11,40 0,449 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030241 SHD1140/0.449/501HE HCT600 11,40 0,449 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030242 SHD1150/0.453/501HA HCT600 11,50 0,453 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030243 SHD1150/0.453/501HE HCT600 11,50 0,453 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030368 SHD1160/0.457/501HA HCT600 11,60 0,457 1/2-20 UNF 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030244 SHD1160/0.457/501HE HCT600 11,60 0,457 1/2-20 UNF 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030245 SHD1170/0.461/501HA HCT600 11,70 0,461 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030246 SHD1170/0.461/501HE HCT600 11,70 0,461 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030247 SHD1180/0.465/501HA HCT600 11,80 0,465 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030248 SHD1180/0.465/501HE HCT600 11,80 0,465 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030249 SHD1190/0.469/501HA HCT600 11,90 0,469 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030250 SHD1190/0.469/501HE HCT600 11,90 0,469 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030251 SHD1200/0.472/501HA HCT600 12,00 0,472 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030252 SHD1200/0.472/501HE HCT600 12,00 0,472 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772

030253 SHD1210/0.476/501HA HCT600 12,10 0,476 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030369 SHD1210/0.476/501HE HCT600 12,10 0,476 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030254 SHD1220/0.480/501HA HCT600 12,20 0,480 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030255 SHD1220/0.480/501HE HCT600 12,20 0,480 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030370 SHD1230/0.484/501HA HCT600 12,30 0,484 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030256 SHD1230/0.484/501HE HCT600 12,30 0,484 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030257 SHD1240/0.488/501HA HCT600 12,40 0,488 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030258 SHD1240/0.488/501HE HCT600 12,40 0,488 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030259 SHD1250/0.492/501HA HCT600 12,50 0,492 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030260 SHD1250/0.492/501HE HCT600 12,50 0,492 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030261 SHD1260/0.496/501HA HCT600 12,60 0,496 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030262 SHD1260/0.496/501HE HCT600 12,60 0,496 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030263 SHD1270/0.500/501HA HCT600 12,70 0,500 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030264 SHD1270/0.500/501HE HCT600 12,70 0,500 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030265 SHD1280/0.504/501HA HCT600 12,80 0,504 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030266 SHD1280/0.504/501HE HCT600 12,80 0,504 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030267 SHD1290/0.508/501HA HCT600 12,90 0,508 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030268 SHD1290/0.508/501HE HCT600 12,90 0,508 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030269 SHD1300/0.512/501HA HCT600 13,00 0,512 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030270 SHD1300/0.512/501HE HCT600 13,00 0,512 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030271 SHD1310/0.516/501HA HCT600 13,10 0,516 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030272 SHD1310/0.516/501HE HCT600 13,10 0,516 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

140º d 1

l2

l3

l1

l4

d2






N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

19

030273 SHD1320/0.520/501HA HCT600 13,20 0,520 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030274 SHD1320/0.520/501HE HCT600 13,20 0,520 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030275 SHD1330/0.524/501HA HCT600 13,30 0,524 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030276 SHD1330/0.524/501HE HCT600 13,30 0,524 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030277 SHD1340/0.528/501HA HCT600 13,40 0,528 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030278 SHD1340/0.528/501HE HCT600 13,40 0,528 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030279 SHD1350/0.531/501HA HCT600 13,50 0,531 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030280 SHD1350/0.531/501HE HCT600 13,50 0,531 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030281 SHD1360/0.535/501HA HCT600 13,60 0,535 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030371 SHD1360/0.535/501HE HCT600 13,60 0,535 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030282 SHD1370/0.539/501HA HCT600 13,70 0,539 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030283 SHD1370/0.539/501HE HCT600 13,70 0,539 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030284 SHD1380/0.543/501HA HCT600 13,80 0,543 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030285 SHD1380/0.543/501HE HCT600 13,80 0,543 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030286 SHD1390/0.547/501HA HCT600 13,90 0,547 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030287 SHD1390/0.547/501HE HCT600 13,90 0,547 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030288 SHD1400/0.551/501HA HCT600 14,00 0,551 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030289 SHD1400/0.551/501HE HCT600 14,00 0,551 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772

030290 SHD1410/0.555/501HA HCT600 14,10 0,555 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030291 SHD1410/0.555/501HE HCT600 14,10 0,555 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030292 SHD1420/0.559/501HA HCT600 14,20 0,559 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030293 SHD1420/0.559/501HE HCT600 14,20 0,559 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030294 SHD1430/0.563/501HA HCT600 14,30 0,563 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030372 SHD1430/0.563/501HE HCT600 14,30 0,563 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030295 SHD1440/0.567/501HA HCT600 14,40 0,567 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030373 SHD1440/0.567/501HE HCT600 14,40 0,567 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030296 SHD1450/0.571/501HA HCT600 14,50 0,571 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030297 SHD1450/0.571/501HE HCT600 14,50 0,571 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030298 SHD1460/0.575/501HA HCT600 14,60 0,575 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030299 SHD1460/0.575/501HE HCT600 14,60 0,575 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030300 SHD1470/0.579/501HA HCT600 14,70 0,579 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030301 SHD1470/0.579/501HE HCT600 14,70 0,579 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030302 SHD1480/0.583/501HA HCT600 14,80 0,583 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030303 SHD1480/0.583/501HE HCT600 14,80 0,583 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030304 SHD1490/0.587/501HA HCT600 14,90 0,587 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030305 SHD1490/0.587/501HE HCT600 14,90 0,587 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030306 SHD1500/0.591/501HA HCT600 15,00 0,591 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030307 SHD1500/0.591/501HE HCT600 15,00 0,591 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030308 SHD1510/0.594/501HA HCT600 15,10 0,594 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030309 SHD1510/0.594/501HE HCT600 15,10 0,594 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

140º d 1

l2

l3

l1

l4

d2






20

030310 SHD1520/0.598/501HA HCT600 15,20 0,598 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030311 SHD1520/0.598/501HE HCT600 15,20 0,598 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030312 SHD1530/0.602/501HA HCT600 15,30 0,602 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030313 SHD1530/0.602/501HE HCT600 15,30 0,602 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030314 SHD1540/0.606/501HA HCT600 15,40 0,606 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030315 SHD1540/0.606/501HE HCT600 15,40 0,606 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030316 SHD1550/0.610/501HA HCT600 15,50 0,610 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030317 SHD1550/0.610/501HE HCT600 15,50 0,610 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030374 SHD1560/0.614/501HA HCT600 15,60 0,614 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030318 SHD1560/0.614/501HE HCT600 15,60 0,614 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030319 SHD1570/0.618/501HA HCT600 15,70 0,618 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030320 SHD1570/0.618/501HE HCT600 15,70 0,618 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030321 SHD1580/0.622/501HA HCT600 15,80 0,622 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030322 SHD1580/0.622/501HE HCT600 15,80 0,622 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030323 SHD1590/0.626/501HA HCT600 15,90 0,626 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030324 SHD1590/0.626/501HE HCT600 15,90 0,626 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030325 SHD1600/0.630/501HA HCT600 16,00 0,630 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

030326 SHD1600/0.630/501HE HCT600 16,00 0,630 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890

140º d 1

l2

l3

l1

l4

d2

N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP


21

– Technical Information


– Technical Data

22N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

Cutting Speed vc (m/min) min-max/

Family Rm andSFM min-max

ISO Material HardnessVc HCT600 HCT600

301 Series 501 SeriesSFM

max min max min

<600 N/mm2 Vc 150 74 131 65<180HBN SFM 492 243 430 213

<950 N/mm2 Vc 132 60 116 53<280HBN SFM 433 197 379 172

700-950 N/mm2 Vc 121 55 106 48200-280 HBN SFM 397 180 347 158

950-1200 N/mm2 Vc 110 50 96 44280-355 HBN SFM 361 164 316 144

1200-1400 N/mm2 Vc 75 34 66 30355-415 HBN SFM 247 112 216 98

Grey Vc 150 68 132 60GG-Ft SFM 493 224 431 196

Spheroidal-Ductile Vc 128 58 112 51GGG-FGS SFM 421 191 368 167

Malleable Vc 92 42 80 36GTS - MN/MP SFM 301 137 263 120

>1400 N/mm2 Vc 61 28 53 24>415 HBN SFM 198 90 174 79

1400 N/mm2 Vc 59 27 51 23400 HBN SFM 192 87 168 77

UnalloyedSteels

AlloyedSteels

Cast Irons

HardSteels

H

K

P

Recommended Cutting Conditions – Speed Vc and SFM

ChilledCast Irons


– Technical Data

23

Family Rm andMetric

ISOMaterial Hardness

fn = mm/min-1: min. & max.

3 4 5 6 7 8 9 10 11 12 13 14 15 16

<600 N/mm2 0.050 0.063 0.075 0.087 0.098 0.110 0.120 0.131 0.141 0.152 0.162 0.171 0.181 0.191<180HBN 0.130 0.168 0.206 0.243 0.279 0.314 0.349 0.384 0.419 0.453 0.487 0.520 0.553 0.586

<950 N/mm2 0.050 0.063 0.075 0.087 0.098 0.110 0.120 0.131 0.141 0.152 0.162 0.171 0.181 0.191<280HBN 0.130 0.168 0.206 0.243 0.279 0.314 0.349 0.384 0.419 0.453 0.487 0.520 0.553 0.586

700-950 N/mm2 0.050 0.063 0.075 0.087 0.098 0.110 0.120 0.131 0.141 0.152 0.162 0.171 0.181 0.191200-280 HBN 0.120 0.154 0.187 0.219 0.251 0.282 0.312 0.342 0.372 0.401 0.430 0.458 0.487 0.515

950-1200 N/mm2 0.050 0.061 0.071 0.081 0.090 0.099 0.108 0.116 0.124 0.132 0.140 0.147 0.154 0.161280-355 HBN 0.110 0.140 0.170 0.198 0.226 0.253 0.280 0.306 0.332 0.357 0.383 0.407 0.432 0.456

1200-1400 N/mm2 0.050 0.059 0.068 0.076 0.083 0.090 0.097 0.103 0.109 0.115 0.121 0.126 0.131 0.137355-415 HBN 0.090 0.113 0.135 0.157 0.177 0.197 0.217 0.236 0.254 0.273 0.291 0.309 0.326 0.343

Grey 0.080 0.102 0.123 0.144 0.164 0.184 0.204 0.223 0.241 0.260 0.278 0.296 0.314 0.332GG-Ft 0.150 0.183 0.214 0.244 0.271 0.298 0.324 0.348 0.372 0.396 0.419 0.441 0.463 0.484

Spheroidal-Ductile 0.080 0.101 0.120 0.139 0.158 0.175 0.193 0.210 0.226 0.243 0.259 0.274 0.290 0.305GGG-FGS 0.120 0.151 0.181 0.209 0.236 0.263 0.289 0.314 0.339 0.364 0.388 0.412 0.435 0.458

Malleable 0.080 0.099 0.116 0.133 0.148 0.164 0.178 0.193 0.207 0.220 0.233 0.246 0.259 0.272GTS - MN/MP 0.120 0.147 0.172 0.195 0.217 0.238 0.259 0.279 0.298 0.317 0.335 0.353 0.370 0.387

>1400 N/mm2 0.040 0.048 0.054 0.061 0.067 0.072 0.077 0.082 0.087 0.092 0.096 0.101 0.105 0.109>415 HBN 0.080 0.100 0.118 0.135 0.152 0.169 0.184 0.200 0.215 0.229 0.244 0.258 0.272 0.286

1400 N/mm2 0.040 0.048 0.054 0.061 0.067 0.072 0.077 0.082 0.087 0.092 0.096 0.101 0.105 0.109400 HBN 0.090 0.112 0.133 0.152 0.171 0.190 0.207 0.225 0.242 0.258 0.274 0.290 0.306 0.321

UnalloyedSteels

AlloyedSteels

Cast Irons

HardSteels

H

K

P

ChilledCast Irons

Family Rm andInch

ISOMaterial Hardness

fn = Inch/rev.

0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394 0.433 0.472 0.512 0.551 0.591 0.630

<600 N/mm2 0.0020 0.0025 0.0030 0.0034 0.0039 0.0043 0.0047 0.0052 0.0056 0.0060 0.0064 0.0068 0.0071 0.0075

<180HBN 0.0051 0.0066 0.0081 0.0096 0.0110 0.0124 0.0138 0.0151 0.0165 0.0178 0.0192 0.0205 0.0218 0.0231

<950 N/mm2 0.0020 0.0025 0.0030 0.0034 0.0039 0.0043 0.0047 0.0052 0.0056 0.0060 0.0064 0.0068 0.0071 0.0075

<280HBN 0.0051 0.0066 0.0081 0.0096 0.0110 0.0124 0.0138 0.0151 0.0165 0.0178 0.0192 0.0205 0.0218 0.0231

700-950 N/mm2 0.0020 0.0025 0.0030 0.0034 0.0039 0.0043 0.0047 0.0052 0.0056 0.0060 0.0064 0.0068 0.0071 0.0075

200-280 HBN 0.0047 0.0061 0.0074 0.0086 0.0099 0.0111 0.0123 0.0135 0.0146 0.0158 0.0169 0.0180 0.0192 0.0203

950-1200 N/mm2 0.0020 0.0024 0.0028 0.0032 0.0036 0.0039 0.0042 0.0046 0.0049 0.0052 0.0055 0.0058 0.0061 0.0064

280-355 HBN 0.0043 0.0055 0.0067 0.0078 0.0089 0.0100 0.0110 0.0121 0.0131 0.0141 0.0151 0.0160 0.0170 0.0180

1200-1400 N/mm2 0.0020 0.0023 0.0027 0.0030 0.0033 0.0035 0.0038 0.0041 0.0043 0.0045 0.0047 0.0050 0.0052 0.0054

355-415 HBN 0.0035 0.0045 0.0053 0.0062 0.0070 0.0078 0.0085 0.0093 0.0100 0.0107 0.0115 0.0122 0.0128 0.0135

Grey 0.0031 0.0040 0.0049 0.0057 0.0065 0.0072 0.0080 0.0088 0.0095 0.0102 0.0110 0.0117 0.0124 0.0131

GG-Ft 0.0059 0.0072 0.0084 0.0096 0.0107 0.0117 0.0127 0.0137 0.0147 0.0156 0.0165 0.0174 0.0182 0.0191

Spheroidal-Ductile 0.0031 0.0040 0.0047 0.0055 0.0062 0.0069 0.0076 0.0083 0.0089 0.0095 0.0102 0.0108 0.0114 0.0120

GGG-FGS 0.0047 0.0059 0.0071 0.0082 0.0093 0.0104 0.0114 0.0124 0.0134 0.0143 0.0153 0.0162 0.0171 0.0180

Malleable 0.0031 0.0039 0.0046 0.0052 0.0058 0.0064 0.0070 0.0076 0.0081 0.0087 0.0092 0.0097 0.0102 0.0107

GTS - MN/MP 0.0047 0.0058 0.0068 0.0077 0.0085 0.0094 0.0102 0.0110 0.0117 0.0125 0.0132 0.0139 0.0146 0.0152

>1400 N/mm2 0.0016 0.0019 0.0021 0.0024 0.0026 0.0028 0.0030 0.0032 0.0034 0.0036 0.0038 0.0040 0.0041 0.0043

>415 HBN 0.0031 0.0039 0.0046 0.0053 0.0060 0.0066 0.0073 0.0079 0.0085 0.0090 0.0096 0.0102 0.0107 0.0112

1400 N/mm2 0.0016 0.0019 0.0021 0.0024 0.0026 0.0028 0.0030 0.0032 0.0034 0.0036 0.0038 0.0040 0.0041 0.0043

400 HBN 0.0035 0.0044 0.0052 0.0060 0.0067 0.0075 0.0082 0.0088 0.0095 0.0102 0.0108 0.0114 0.0120 0.0126

UnalloyedSteels

AlloyedSteels

Cast Irons

HardSteels

H

K

P

ChilledCast Irons

N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

Recommended Cutting Conditions – Feed Metric and Inch


– Drills Set Up

24

Tool holding:Keep the total indicated run-out within 0,02mm (0.0008 inch) for drills with whistle notch shank.

Drills with cylindrical shanks can be used with high precision collet chucks, hydraulic chucks or shrink fitholders. First choice is hydraulic chucks or shrink fit holders. For best result keep run-out < 0,02mm(0,0008 inch).

Stability:The stability of the application is important to achieve the best performance in tool life and hole accuracy.Before starting with the drilling operation check the machine and spindle condition, the fixture of the drill andthe clamping of the component to secure maximum stability and rigidity.

Hole depth < 3 x D min. 8 – 10 barHole depth > 3 x D min. 10 – 15 bar

Minimum recommended emulsion mix strength = 6% - 8%.

For high temperature alloys and stainless steels minimum recommended emulsion mix strength = > 10%.

Coolant recommendation

0,2 – 0,3 mm (0.078 – 0.011 inch)


– Operational guidelines

25

Toolholding Run out tolerance Interrupted cut

Ad

just

ing

Scr

ew

Thrust bearing type collet chuckholds the drill securely

Runout ≤ 0,02 mm≤ 0.0008 inch

Requires prior drilling

• Spot face with anend mill prior todrilling.

One Process

• Lower feed whendrilling interuptedpart.

Drilling on inclined surfaces

Inclined or curved surfaces recommend a lower feed rate than the standard value.Inclination angle of the workpiece surface (and the type of drill) have an influence on the feed reduction.

By a max. surface inclination < 4° the feed needs to be reduced by 50%.More inclined surfaces than > 4° must be pre-machined with a mill.

Drilling on Turning Machines

• When drilling on turning machines the drill must be on centre.

• The tolerance range of the centre position should not exceed ±0,01 mm (0.0004 inch).

• On bar-turning lathes do not drill into centre pips or test drill holes.

• Cut-off tools must be mounted precisely.

Reduced feed

100% Feed

�> 6º


– Power Requirement Guidelines

26N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

Hardcore: Power consumption for Alloyed Steel 300HBN

7.00

6.00

5.00

4.00

3.00

2.00

1.00

0.00

0.20 0.25 0.30 0.35 0.40 0.45 0.50

Diameter (inch)

Pow

er (H

P)

Cutting Speeds:

Vc 131fpmVc 197fpmVc 262fpmVc 360fpm

5.00

4.50

4.00

3.50

3.00

2.50

2.00

1.50

1.00

0.50

0.00

4 6 8 10 12 14

Diameter (mm)

Pow

er (K

W)

Cutting Speeds:

Vc 40 m/minVc 60 m/minVc 80 m/minVc 110 m/min

◆

◆Hardcore: Power consumption for Alloyed Steel 300HBN


– Power Requirement Guidelines

27

Hardcore: Power consumption for Grey Iron 200HBN

8.00

7.00

6.00

5.00

4.00

3.00

2.00

1.00

0.00

4 6 8 10 12 14

Diameter (mm)

Pow

er (K

W)

Cutting Speeds:

Vc 70 m/minVc 90 m/minVc 120 m/minVc 150 m/min

◆

◆Hardcore: Power consumption for Grey Iron 200HBN

10.00

9.00

8.00

7.00

6.00

5.00

4.00

3.00

2.00

1.00

0.00

0.20 0.25 0.30 0.35 0.40 0.45 0.50

Diameter (inch)

Pow

er (H

P)

Cutting Speeds:

Vc 229fpmVc 295fpmVc 393fpmVc 492fpm

N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP


– Troubleshooting

28

Cutting edge build up

• Increase the cutting speed

• Increase the coolant concentration

• Regrinding

Chipping on cutting face

• Prove the machine spindle and tool holder quality

• Check the clamping and the fixture of the component

• Reduce the feed

• Reduce tool life change

• Regrinding

Heavy wear on chisel / centre chipping



• Check the concentricity of the drill max.0,02mm(0.0008 inch)

• Reduce the feed during entrance

• Reduce the feed


– Troubleshooting Continued..

29

Misalignment / poor tolerance



• Check the concentricity of the drill maximum 0,02 mm(0.0008 inch)

• Reduce feed during entrance

• Reduce feed

• Increase the coolant concentration and pressure

• Regrinding

Chipping external corners




• Reduce the cutting speed

• Reduce the feed during entrance

• Regrinding

Periphery land wear








30

Chipping at intersection, web thinning and cutting lip


• Proof the machine spindle and tool holder quality

• Regrinding

Heavy burr on breakthrough

• Reduce the feed

• Reduce tool life change

• Regrinding



31

Excessive flank wear


• Increase the feed




Poor surface quality



• Increase the coolant concentration and pressure

• Check the concentricity of the drill max.0,02mm(0,0008 inch)

Ra


– Nomenclature and Drilling Formulae

32

Cutting speed (m/min)Vc =

n x D x πSFM = Vc x 3,28

1000

RPM (rev/min)n =

Vc x 1000

π x D

Feed (mm/rev)f =

VfFeed (inch/rev) =

f (mm)

n 25,4

Feed speed (mm/min) Vf = f x n

Material removal rate (cm3/min)Q =

Vf x AT

1000

Cross section area of the hole (mm2)AT =

π x D2

4

Torque (Nm)Mc =

f x kc D2

1000 8

Power requirement (KW)Pc =

Q

6000 x �

Machining time (min/piece)Tc =

L + h

Vf

Legend:Kc = Specific cutting force (N/mm2)

L = Drilling depth (mm)

h = Safety Distance (mm)

� = Machine efficiency (%)

kr = Point Angle2

x

x sin kr

x kc x sin kr


– Special Drills

33

Please complete form and fax to Customer Services on USA - 800 223 2219Canada - 800 432 6227Mexico - 011 877 285 2505

l2

l3

l1

w1 d 1Ø

R1

d 2Ø

R2

w 2

w 3d 3Ø DØ

L

Choose between radius R1 - R2 or angle W2 - W3

Customer:

Attn.:

Phone:

Fax:

Email:

Material to be machined:

Int. Cooling Yes No No. of flutes:

Helix angle: Coating:

Shank: Cylindrical:

Weldon: Whistlenotch:

ø D mm ø d1 mm

ø d2 mm ø d3 mm

L mm l1 mm

l2 mm l3 mm

R1 mm R2 mm

W1 mm W2 mm

W3 mm


– Materials Cross Reference Chart

34N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

Country/StandardMaterial Group Rm ATI Allvac ATI Allegheny GERMANY/ITALY U.K. FRANCE USA

(N/mm2) Designation Ludlum W.-Nr. DIN BS AFNOR AIS/SAEDesignationFree cutting steel 390-710 1.0722 10SPb20 10PbF2Free cutting steel 410-710 1.0715 9SMn28 230M07 S250 1213Free cutting steel 410-710 1.0718 9SMnPb28 S250Pb 12L13Free cutting steel 430-740 1.0736 9SMn36 240M07 S300 1215Free cutting steel 430-740 1.0737 9SMnPb36 S300Pb 12L14Heat treatable steel 500-650 1.0402 C22 050A20 CC20 1020Heat treatable steel 500-650 1.1158 Ck25 1025Free cutting steel 510-740 1.0726 35S20 212M36 35MF4 1140Superficial hardening steel 540-730 1.1183 Cf35 060A35 XC38TS 1035Heat treatable steel 550-750 1.0501 C35 060A35 CC35 1035Case hardening steel 590-780 1.0401 C15 080M15 CC12 1015Case hardening steel 590-780 1.1141 Ck15 080M15 XC12 1015Heat treatable steel 630-800 1.0503 C45 080M46 CC45 1045Heat treatable steel 630-800 1.1191 Ck45 080M46 XC42 1045Superficial hardening steel 640-830 1.1213 Cf53 060A52 XC48TS 1050Carbon tool steel 640-830 1.1545 C105W1 Y1105 W.110Heat treatable steel 640-840 1.1170 28Mn6 160M28 20M5 1330Heat treatable steel 640-880 1.1167 36Mn5 40M5 1335Heat treatable steel 690-930 1.1157 40Mn4 150M36 35M5 1039Carbon tool steel 650-750 1.1663 C125W Y2120 W.112Heat treatable steel 700-900 1.0535 C55 070M55 1055Heat treatable steel 700-900 1.1203 Ck55 070M55 XC55 1055Heat treatable steel 750-900 1.0601 C60 080A62 CC55 1060Heat treatable steel 750-950 1.1221 Ck60 080A62 XC60 1060Spring steel 1000-1100 1.1274 Ck101 060A96 1095

High temp. constructional steel 440-570 1.5415 15Mo3 1501-240 15D3ASTMA20Gr.A

High temp. constructional steel 440-590 1.7335 13CrMo4 4 1501- 15CD3.5 ASTM A182620Gr.27High temp. constructional steel 440-590 1.7380 10CrMo9 10 1501-622 12CD9;10 ASTM A182

High temp. constructional steel 450-590 1.5423 16Mo5 1503-245- 4520420

Tough at sub zero 490-640 1.5622 14Ni6 16N6 AST˜MA350LF5

High temp. constructional steel 490-640 1.7715 14MoV6 3 1503-660-440

Tough at sub zero 510-710 1.5680 12Ni19 Z18N5 2515Case hardening steel 640-1080 1.7131 16MnCr5 (527M20) 16MC5 5115Case hardening steel 640-1080 1.7262 15CrMo5 12CD4Cold work tool steel 640-670 O1 O1Hot / cold tool steel 640-720 S7 S7

Tough at sub zero 640-840 1.5662 X8Ni9 1501- ASTM A353509;510Ball and roller bearing steel 650-750 1.3505 100Cr6 534A99 100C6 52100Heat treatable steel 650-950 1.7218 25CrMo4 1717CDS 25CD4 4130

110Case hardening steel 690-1080 1.6523 21NiCrMo2 805M20 20NCD2 8620Case hardening steel 690-880 1.7015 15Cr3 523M15 12C3 5015Heat treatable steel 690-930 1.5710 36NiCr6 640A35 35NC6 3135Superficial hardening steel 700-750 1.7045 42Cr4 5140

ATI Metal



N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

35


(N/mm2) Designation Ludlum W.-Nr. DIN BS AFNOR AIS/SAEDesignationHeat treatable steel 700-950 1.7033 34Cr4 530A32 32C4 5132Cold work tool steel 720-775 A6 A6Superficial hardening steel 740-1080 1.7223 41CrMo4 708M40 42CD4TS 4140;4142Heat treatable steel 750-1100 1.7220 34CrMo4 708A37 35CD4 4137;4135Cold work tool steel 750-775 O7 O7Cold work tool steel 750-800 1.2542 45WSCrV7 BS1 S1Cold work tool steel 750-850 1.2067 100Cr6 BL3 Y100C6 L3Cold work tool steel 750-850 A2 1.2363 X100CrMoV51 BA2 Z100CDV5 A2Cold work tool steel 750-850 1.2419 105WCr6 105WC13Cold work tool steel 750-850 1.2833 100V1 BW2 Y1105V W210High speed steel 775-990 M2 1.3343 S 6-5-2 BM2 Z85WDCV M2

06-05-04-02

High speed steel 775-990 1.3348 S 2-9-2 Z100WCWV M709-04-02-02Heat treatable steel 780-1080 1.3401 X120Mn12 Z120M12 Z120M12Superficial hardening steel 780-1180 1.8159 50CrV4 735A50 50CV4 6150High speed steel 795-870 M3 M3Cold work tool steel 795-910 A7 A7

High speed steel 800-1050 1.3355 S 18-0-1 BT1 Z80WCV T118-04-01Heat treatable steel 800-1100 1.6511 36CrNiMo4 816M40 40NCD3 9840Heat treatable steel 800-1100 1.7035 41Cr4 530M40 42C4 5140Heat treatable steel 800-1200 1.7225 42CrMo4 708M40 42CD4 4140Cold work tool steel 800-850 1.2713 55NiCrMoV6 55NCDV7 L6

High speed steel 820-1050 1.3243 S 6-5-2-5 Z85WDKCV 06-05-05-04-02

High speed steel 820-1050 1.3255 S 18-1-2-5 BT4 Z80WKCV T418-05-04-01Case hardening steel 830-1180 1.5732 14NiCr10 14NC11 3415Cold work tool steel 850-900 D2 1.2379 X155CrVMo12-1 BD2 Z160CDV12 D2Cold work tool steel 850-900 1.2080 X210Cr12 BD3 Z200Cr12 D3Cold work tool steel 850-900 1.2436 X210CrW12Cold work tool steel 850-900 1.2601 X165CrMoV12Case hardening steel 880-1230 1.5752 14NiCr14 655M13 12NC15 3415

Heat treatable steel 900-1200Nickelvac®

1.6582 34CrNiMo6 817M40 35NCD6 43404340Nitriding steel 950-1000 1.8509 41CrAIMo7 905M39 40CAD6, 12Spring steel 950-1050 1.0904 55Si7 250A53 55S7 9255Case hardening steel 980-1320 1.6587 17CrNiMo6 820A16 18NCD6Heat treatable steel 980-1420 1.7361 32CrMo12 722M24 30CD12Spring steel 1050-1100 1.7176 55Cr3 527A60 55C3 5155Spring steel 1050-1100 1.0961 60SiCr7 60SC7 9262Nitriding steel 1080-1270 1.2606 39CrMoV13 9 BH12 H12Hot work tool steel 1180-1570 1.2343 BH11 H11Hot work tool steel 1180-1670 1.2365 BH10 H10Hot work tool steel 1180-1770 H13 1.2344 X40CrMoV51 BH13 Z40CDV5 H13Hot work tool steel 1180-1770 1.2581 X30WCrV9 3 BH21 Z30WCV9 H21Hot work tool steel 1270-1670 1.2678 BH19 H19

ATI Metal



36N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP


(N/mm2) Designation Ludlum W.-Nr. DIN AFNOR AMSDesignation

Stainless steel 400-600 Nickelvac®

AL 403 1.4000 X6Cr13 403S17 Z6C13 403410 / 403

Heat resistant steel casting 400-600 1.4865 G-X40NiCrSi38 18 330C11Stainless steel casting 440-640 1.4308 G-X6CrNi18 9 304C15 Z6CN18.10MStainless steel casting 440-640 1.4408 G-X6CrNiMo18 10 316C16Stainless steel casting 440-640 1.4581 G-X7CrNiMoNb18 10 318C17 Z4CNNDNb18 12M

Heat resistant steel 450-650 AL 405 1.4724 X10CrAI13 403S17 Z10C13 405

Stainless steel 450-650Nickelvac®

AL 410 1.4006 X10Cr13 410S21 Z10C14 410410 / 403Stainless steel 450-650 AL 430 1.4016 X6Cr17 430S15 Z8C17 430Stainless steel 450-650 AL 434 1.4113 X6CrMo17 434S17 Z8CD17.01 434Stainless steel 460-680 AL 304L 1.4306 X2CrNi19 11 304S12 Z3CN18.10 304LStainless steel 490-690 AL 305 1.4303 X5CrNi18 12 305Stainless steel 490-690 Allvac® 316 L AL 316L 1.4435 X2CrNiMo18 12 316S12 Z2CND17.13 316LStainless steel 490-690 AL 317L 1.4438 X2CrNiMo18 16 317S12 Z2CND19.15 317LStainless steel 490-740 1.4583 X10CrNiMoNb18 12 Z6CNDNb17 13B 318Stainless steel 500-550 E-Brite® Alloy ASTM A240Stainless steel 500-700 AL 303 1.4305 X10CrNiS18 9 303S21 Z10CNF 18.09 303Stainless steel 500-700 AL 304 1.4301 X5CrNi18 10 304S15 Z6CN18.09 304Stainless steel 500-730 AL 321 1.4541 X6CrNiTi18 10 2337 Z6CNT18.10 321Stainless steel 500-730 1.4571 X6CrNiMoTi17 12 2 320S17 Z6NDT17.12 316TiHeat resistant steel 500-750 AL 309 1.4828 X15CrNiSi20 12 309S24 Z15CNS20.12 309Heat resistant steel 500-750 AL 310S 1.4845 X12CrNi25 21 310S24 Z12CN25 20 310SStainless steel 500-750 AL 904L 1.4539 ASTM B625Heat resistant steel 500-750 1.4878 X12CrNiTi18 9 321S320 Z6CNT18.12BStainless steel 510-710 AL 316 1.4401 X5CrNiMo18 10 316S16 Z6CND17.11 316Stainless steel 510-740 AL 347 1.4550 X6CrNiNb18 10 347S17 Z6CNNb18.10 347Heat resistant steel 520-720 1.4762 X10CrAI 24 Z10CAS24 446Stainless steel 550-760 1.4311 X2CrNiN18 10 304S62 Z2CN18.10 304LNHeat resistant steel 550-800 1.4841 X15CrNiSi25 20 310Heat resistant steel 550-800 1.4864 X12NiCrSi36 16 Z12NCS35.16 330Stainless steel 580-800 AL 316LXN 1.4429 X2CrNiMoN17 13 3 Z2CND17.13 316LNStainless steel 590-780 AL 416 1.4005 X12CrS13 416Stainless steel 640-840 1.4104 X12CrMoS17 Z10CF17 430FStainless steel 640-900 1.4460 X8CrNiMo27 5 329Stainless steel 700-800 1.4034 X45Cr13 420S45 Z40CM Z38C13MStainless steel 700-950 AL 301 1.4310 X12CrNi17 7 Z12CN17.07 301Stainless steel 750-800 1.4027 G-X20Cr14 420C29 Z20C13MStainless steel 750-950 AL 420 1.4021 X20Cr13 420Stainless steel casting 760-960 1.4313 X5CrNi13 4 425C11 Z4CND13.4MStainless steel 800-900 AL 2205 ASTM A240Stainless steel 850-950 1.4057 X20CrNi172 431S29 Z15CNi6.02 431Stainless steel 1100-1200 AM 350 ASTM A693Precipitation hardening stainless AL 13-8 13-8 PH

Precipitation hardening stainless Nickelvac®

AL 15-5 1.4540 X4CrNiCuNb164 Z6CNU15.05 15-5 PH15-5Precipitation hardening stainless AL 15-7 1.4532 X7CrNiMoAl157 Z8CNDA15.07 15-7 PH

Precipitation hardening stainless Nickelvac®

AL 17-4 1.4542 X5CrNiCuNb174 Z6CNU17.04 17-4 PH17-4Precipitation hardening stainless AL 17-7 1.4568 X7CrNiAl177 Z8CNA17.07 17-7 PH

ATI Metal



N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

37

Cr Ni C Mn Si P S Mo Cu Ti Others

12.0 0.15 0.5 0.50 0.02 0.01

18.8 38.0 0.4 1.0 1.75 0.045 0.03 W 4.7519.0 10.0 0.07 1.5 2.0 0.045 0.0319.0 11.0 0.07 1.5 1.5 0.045 0.03 2.519.0 11.5 0.06 1.5 1.5 0.045 0.03 2.25

12.0 0.08 1.0 0.50 0.04 0.03Al 0.10-

0.30

12.0 0.15 0.5 0.50 0.02 0.01 0.5 0.5

16.0 0.08 1.0 1.0 0.04 0.0317.0 0.08 0.7519.0 10.0 0.015 1.0 0.5 0.023 0.01518.0 11.5 0.12 2.0 1.0 0.04 0.0317.0 12.0 0.015 1.0 0.5 0.023 0.015 2.519.0 13.0 0.015 1.0 1.0 0.023 0.015 3.518.0 14.0 0.08 2.0 2.026 0.003 1

19.5 10.5 0.16 1.5 2.0 0.04 0.3 0.619.5 9.0 0.08 1.5 2.0 0.04 0.0418.0 9.5 0.08 2.0 1.0 0.04 0.03 0.4017.5 12.0 0.08 2.0 1.0 0.045 0.03 2.25 5.023.5 14.0 0.20 1.5 2.0 0.04 0.0425.0 20.5 0.15 2.0 0.75 0.045 0.0320.5 4.5 1.518.0 10.5 0.12 2.0 1.0 0.045 0.03 0.40 Al 0.4017.0 13.0 0.08 2.0 0.75 0.04 0.03 1.5 0.5018.0 11.0 0.08 2.0 1.0 0.045 0.0325.0 0.12 1.0 1.0 0.04 0.03 Al 1.5018.0 10.0 0.03 2.0 1.0 0.045 0.03 N 0.1624.5 20.5 0.18 2.0 1.5 0.04 0.03 0.5 0.515.0 35.0 0.15 1.0 2.5 0.04 0.0417.5 13.0 0.03 2.0 1.0 0.045 0.025 2.75 N 0.1613.0 0.15 1.25 1.0 0.07 0.07 0.6017.0 0.12 1.25 1.0 0.06 0.15 0.525.5 3.5 0.1 0.04 0.03 1.013.5 0.5 1.0 1.0 0.045 0.0317.0 7.0 0.14 2.0 1.0 0.045 0.0313.5 1.0 0.2 1.0 1.0 0.045 0.0312.5 0.20 1.0 1.0 0.04 0.0413.0 4.5 0.07 1.5 1.0 0.035 0.025 0.722 5.5 3 N 0.16

16.0 2.0 0.20 1.0 1.0 0.04 0.0316.5 4.3 0.08 2.813 8 2.2 Al 1.2

14.8 4.5 0.03 0.5 0.5 0.02 0.015 3.5 Cb 0.3

15.0 7.0 0.045 0.5 0.5 0.02 0.015 2.5 Al 1.15

16.3 4.0 0.035 0.5 0.5 0.02 0.015 4.0 Cb 0.3

17.0 7.0 0.045 0.5 0.5 0.02 0.02 Al 1.15



38N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

Country/StandardMaterial Group HBN ATI Allvac ATI Allegheny GERMANY/ITALY U.K. FRANCE USA

Designation Ludlum W.-Nr. DIN BS AFNOR ASTM/SAEDesignationGrey cast iron 175 0.6010 GG 10 Grade 100 Ft 10 D No 20 BGrey cast iron 185 0.6015 GG 15 Grade 150 Ft 15 D No 25 BGrey cast iron 205 0.6020 GG 20 Grade 220 Ft 20 D No 30 BGrey cast iron 220 0.6025 GG 25 Grade 260 Ft 25 D No 35 BGrey cast iron 230 0.6030 GG 30 Grade 300 R 30 D No 45 BGrey cast iron 235 0.6035 GG 35 Grade 350 Ft 35 D No 50 BGrey cast iron 250 0.6040 GG 40 Grade 400 Ft 40 D No 55 BSpheroidal / nodular/

150-180 GGG 35.3 350/22 FGS 350-22 60-40-18ductile cast ironSpheroidal / nodular/ 155-220 0717-02 GGG 40 420/12 65-45-12ductile cast ironSpheroidal / nodular/

190-255 0727-02 GGG 50 500/7 FGS 500-7 80-55-06ductile cast ironSpheroidal / nodular/



265-300 GGG 80 900/2 FGS 900-2 120-90-02ductile cast ironMalleable cast iron 150 GTS-35-10 B 340/12 MN 35-1 32510Malleable cast iron 175 0.8145 GTS-45-06 P 440/7 40010Malleable cast iron 205 0.8155 GTS-55-04 P 510/4 MP 50-5 50005Malleable cast iron 230 0.8165 GTS-65-02 P 570/3 Mn 650-3 A220-70003Malleable cast iron 265 0.8170 GTS-70-02 P 690/2 Mn 700-2 A220-80002Aluminium alloys 3.0255 Al99,9 1B A5 1050Aluminium alloys 3.0515 AlMn N3Aluminium alloys 3.0615 AlMgSiPbAluminium alloys 3.1325 AlCuMg1 A-U4G 2017Aluminium alloys 3.1355 AlCuMg2 L97 A-U4G1 2024Aluminium alloys 3.1645 AlCuMgPbAluminium alloys 3.1655 AlCuBiPb FC1 A-U5PbBi 2011Aluminium alloys 3.2245 AlSi5Aluminium alloys 3.2305 AlRMgSiAluminium alloys 3.2315 AlMgSi1 H30 6351Aluminium alloys 3.3206 AlMgSi0,5 H9 6063Aluminium alloys 3.3309 AlRMg0,5Aluminium alloys 3.3315 AlMg1 N41 A-G0,6 5005Aluminium alloys 3.3316 AlMg1,5 3L44 A-G1,5 5050Aluminium alloys 3.3319 AlRMg1Aluminium alloys 3.3523 AlMg2,5 2L56 A-G2,5C 5052Aluminium alloys 3.3535 AlMg3 N5 A-G3M 5754Aluminium alloys 3.3545 AlMg4Mn A-G4MC 5086Aluminium alloys 3.3547 ASlMg4,5Mn N8 A-G4,5MC 5083Aluminium alloys 3.3549 AlMg5 N6 5056Aluminium alloys 3.4365 AlZnMgCu1,5 DTD5074 A-Z5GU 7075Aluminium alloys AlZnMg1 7005Aluminium alloys AlMg2,5Mn N51 A-G2,5MC 5454Aluminium alloys AlSi3,5



N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

39

Si Fe Cu Mn Mg Cr Zn Ti

0.25 0.4 0.05 0.05 0.05 0.07 0.050.5 0.7 0.1 1.2 0.3 0.1 0.2 0.11.0 0.5 0.1 0.7 0.9 0.3 0.3 0.20.5 0.7 4.0 0.7 0.7 0.1 0.250.5 0.5 4.3 0.6 1.5 0.1 0.25 0.150.8 0.8 4.0 0.75 1.1 0.1 0.8 0.20.4 0.7 5.5 0.35.0 0.4 0.05 0.1 0.1 0.2 0.250.55 0.15 0.02 0.45 0.151.0 0.5 0.1 0.6 0.9 0.25 0.2 0.10.45 0.15 0.1 0.1 0.45 0.05 0.15 0.10.01 0.008 0.35 0.01 0.0080.3 0.45 0.05 0.15 0.9 0.1 0.20.4 0.45 0.05 0.15 1.5 0.1 0.20.1 0.008 1.00 0.01 0.0080.25 0.4 0.1 0.1 2.5 0.2 0.10.4 0.4 0.1 0.5 3.1 0.3 0.2 0.150.4 0.5 0.1 0.45 4.0 0.15 0.25 0.150.4 0.4 0.1 0.7 4.5 0.15 0.25 0.150.2 0.35 0.15 0.35 4.5 0.1 0.25 0.10.4 0.5 1.6 0.3 2.5 0.23 5.5 0.20.35 0.4 0.1 0.45 1.4 0.13 4.5 0.030.4 0.4 0.05 0.75 2.7 0.1 0.1 0.154.5 0.04



40N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

Country/StandardMaterial Group Commercial ATI Allvac ATI Allegheny GERMANY/ITALY U.K. FRANCE USA

Designation Designation Ludlum W.-Nr. DIN AFNOR AMSDesignation

Iron based alloys C-250 VascoMax® C-250 6501, 6512,6520

Iron based alloys C-350 VascoMax® C-350Iron based alloys C-200 VascoMax® C-200Iron based alloys C-300 VascoMax® C-300 6514Iron based alloys T-200 VascoMax® T-200

Iron based alloys T-250 VascoMax® T-2506518, 6519,6591

Iron based alloys Greek Ascoloy AL 418 5508Iron based alloys Jethete M-152 Z12 CND 12 5718, 5719Iron based alloys Haynes® 556 X12CrCoNi2120 5768Iron based alloys N 155 Z12 CNKDW 20 5768Iron based alloys S 590 X40CoCrNi2020 Z42 CKNDW 5533Iron based alloys A286 ALTEMP® A 286 1.4980 HR 5152 Z06 NCT 25 ASTM 368Iron based alloys Discaloy 16/25/6 Z3 NCT 25 5725Iron based alloys AL-6XN Alloy AL-6XN® Alloy ASTM SB688Iron based alloys Discaloy 24 Z3 NCT 25 ASTM A638Iron based alloys Armco® 18Iron based alloys Incoloy® 801 G-X50CrNi3030 5552Iron based alloys Incoloy 800 Nickelvac® 800 AL 800 X10NiCrAlTi3220 3082-76 25 NC 3520 ASME SB 409Iron based alloys Incoloy 802Iron based alloys N 156Iron based alloys 20CB-3® AL 20 ASTM B463Iron based alloys Sanicro 30 X2NiCrAlTi3220Iron based alloys Incoloy 803Iron based alloys Allvac 330 Allvac® 330 5592, 5716Iron based alloys Alloy 36 AL 36 ASTM F1684Iron based alloys Incoloy DS X12NiCrSi3616 3072-76Iron based alloys Alloy 42 AL 42 ASTM F30Iron based alloys Armco 20-45-5Iron based alloys 4750 AL 4750 ASTM B753Iron based alloys Alloy 21-6-9 ALLOY 21-6-9 ASTM A666Iron based alloys 13-8 Mo Vasco® 13-8 Mo 5629


Designation Designation Ludlum W.-Nr. DIN AFNOR AMSDesignationCobalt based alloys MP35N Allvac® 35NCobalt based alloys L 605 Nickelvac® L-605 CoCr20W15Ni KC 20 WN 5759

Cobalt based alloysNickelvac® TJA-

ASTM F1537TJA-1537®

1537Cobalt based alloys S 816 ALTEMP® S 816 CoCr20Ni20W 5534Cobalt based alloys HS 21 CoCr28Mo 3531 ASTM F-75Cobalt based alloys HS 25 CoCr20W15Ni KC 20 WN AISI 670Cobalt based alloys HS 30 CoCr26Ni14MoCobalt based alloys HS 31 CoCr25NiW 3146 KC 25 NW ASTM A567Cobalt based alloys HS 36 CoCr19W14NiBCobalt based alloys Jetalloy 209Cobalt based alloys L 251Cobalt based alloys M 203

ATI Metal



N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

41

Ni Co Cr Mo W Si Mn C Al Ti P S Others

18.5 7.8 4.8 0.05 0.05 0.02 0.1 0.4 0.005 0.005

18.5 12.0 4.8 0.05 0.05 0.02 0.1 1.4 0.005 0.00518.5 8.5 3.25 0.05 0.05 0.01 0.2 0.005 0.00518.5 8.8 4.8 0.05 0.05 0.02 0.1 0.73 0.005 0.00518.5 3.0 0.05 0.05 0.01 0.7 0.005 0.005

18.5 3.0 0.03 0.05 0.02 0.1 1.4 0.005 0.005

2 12 2.5 0.192.5 12 1.7 0.15 V 0.320 20 21 3 2.5 0.1 Nb + Ta20 20 21 3 2.5 0.5 1.5 0.15 Nb 1.020 20 21 4 4 0.4325 14 1.3 0.5 1.3 0.05 0.2 2.125 16 6 0.7 1.35 0.12 0.3 Nb 0.425 20.5 6.5 0.02 N 0.226 13.5 2.7 0.8 0.9 0.04 0.1 1.73.7 17.2 0.47 12.5 0.0632 20.5 0.5 0.8 0.05 1.1

32.5 21.0 0.5 0.75 0.05 0.37 0.37 0.007 Cu 0.3732.5 21.5 0.4 0.8 0.433 24 17 3 2 0.3333 20 2.2 Cu 3.334 22 0.55 0.55 0.03 0.3 0.5 Cu 0.135 25 0.08 0.15 0.15

35.5 18.5 1.13 1.0 0.04 0.01 0.01 Cu 0.53637 18 2.3 1.0 0.064146 20 2.3 1.0 5 0.08 Nb 0.4496.5 21 6.0 No 0.38.0 12.8 2.3 0.05 0.10 0.03 1.05 0.005 0.004

Ni Fe Cr Mo W Si Mn C Al Ti P S Others

35 20 9.8 0.01310 0.5 20 15 1.7 0.1

0.2 0.25 28 6 0.5 0.5 0.06 N 0.2

20 4 20 4 4 0.4 1.2 0.383 1 27 5 0.6 0.6 0.2510 3 20 15 2 1.5 0.116 1 24 6 0.6 0.6 0.410 1.5 25 8 0.75 0.6 0.410 2 18 15 1.5 0.410 1 20 15 2.0 0.0210 1 19 14 0.4

24.5 1 19.5 12 1 0.8 2.15 24.5 0.07



42N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP


Designation Designation Ludlum W.-Nr. DIN AFNOR AMSDesignationCobalt based alloys M 204Cobalt based alloys M 205Cobalt based alloys MAR-M 302 CoCrW10TaZrBCobalt based alloys MAR-M 322 CoCr22W9TaZrNbCobalt based alloys MAR-M 509 CoCr24Ni10WtaZrB 3146-3Cobalt based alloys MAR-M 905Cobalt based alloys MAR-M 918 CoCr20Ni20TaCobalt based alloys Stellite 1 KC 33 W13Cobalt based alloys Stellite 6 KC 26 NWCobalt based alloys Stellite 12 KC 28 W8Cobalt based alloys V-36 CoCr25Ni20M0WNbCobalt based alloys WI-52 CoCr21Mo11WCobalt based alloys X 40 CoCr25NiW 3146-2 ASTM A567Cobalt based alloys X 45Cobalt based alloys X 50


Designation Designation Ludlum W.-Nr. DIN AFNOR AMSDesignationNickel based alloys Alloy 22 AL 22 ASME SB575Nickel based alloys Allvac® AllcorrNickel based alloys Astroloy Allvac AstroloyNickel based alloys Duranickel 310Nickel based alloys GMR 235 AISI:686Nickel based alloys GMR 235-D NiCr16MoAlNickel based alloys Hastelloy® B Nickelvac® H-B S-NiMo30 ND27FeV 5396ANickel based alloys Hastelloy B-2 Nickelvac H-B-2Nickel based alloys Hastelloy C NiCr17Mo17FeW NC17DWY 5388CNickel based alloys Hastelloy DNickel based alloys Hastelloy N Nickelvac H-NNickel based alloys Hastelloy R235Nickel based alloys Hastelloy W Nickelvac H-WNickel based alloys Hastelloy X Nickelvac H-X ALTEMP® HX 2.4665 NiCr22FeMo HR6,204 NC22FeD 5536Nickel based alloys Haynes 75Nickel based alloys HS 27 NiCo32Cr26Mo KC20WNNickel based alloys IN 100 NiCo15Cr10MoAlTi NK15CAT 5397Nickel based alloys IN 713Nickel based alloys Incoloy® 020 2.4660 ASME SB463Nickel based alloys Incoloy 804Nickel based alloys Incoloy 825 Nickelvac 825 AL 825 2.4858 NiCr21Mo 3072-76 NC21FeDU ASME SB424Nickel based alloys Incoloy 901 NiFe35Cr14MoTi Z8NCDT42 5660Nickel based alloys Incoloy 903Nickel based alloys Incoloy 925Nickel based alloys Inconel® 600 Nickelvac 600 AL 600 2.4816 NiCr15Fe 3072-76 NC15Fe 5540Nickel based alloys Inconel 601 Nickelvac 601 AL 601 2.4851 5715Nickel based alloys Inconel 617 Nickelvac 617 2.4663Nickel based alloys Inconel 622 2.4602Nickel based alloys Inconel 625 Nickelvac 625 ALTEMP 625 2.4856 NiCr22Mo9Nb NC22FeDNB ASME SB443

ATI Metal



N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

43

Ni Fe Cr Mo W Si Mn C Al Ti P S Others

24.5 18.5 12 1 1 0.0724.5 18.5 12 2.75 0.07

21.5 10 0.85 Ta 9.021.5 9 0.1 0.1 0.75 1.0 Ta 4.5, Zr 2.25

10 1 23.5 7 0.1 0.1 0.2 0.6 Ta 3.5, Zr 0.520 20 0.5 0.05 Ta 7.5, Zr 0.120 0.4 20 0.1 0.1 0.05 Ta 7.5, Zr 0.1

33 13 2.526 5 1.0 Nb 6.029 9 1.8

20 3 25 4 2 0.4 1 0.26 Nb 2.01 2 21 11 0.25 0.45 Nb 2.0

10.5 1.5 25.5 7.5 0.75 0.75 0.510.5 2 25.5 7 0.7 0.25 B 0.0120.5 4 22.5 12 0.75

Fe Co Cr Mo W Si Mn C Al Ti P S Others

2.5 20.6 13.9 2.6531.0 10.0 2.0 0.02 0.25 0.25 Nb 0.4

17.0 15.0 5.0 0.04 4.0 3.5 B 0.0250.6 0.5 1.0 0.5 4.4 0.610.0 15.5 5.2 0.4 0.2 0.15 3.0 2.04.5 15.5 5.0 0.15 3.5 2.5 B0.055.0 2.0 1.5 28.0 0.05 0.5 0.02 V 0.41.0 0.5 0.5 16.0 0.05 0.5 0.01 0.02 0.0156.0 2.0 15.0 17.0 5 0.042.0 1.0 9.0 1.0 0.1 Cu 3.04.0 7.0 16.5 0.0210.0 2.5 15.5 5.5 0.15 2 2.54.0 5.0 24.5 0.0218 1.5 22 9.0 0.6 0.15.0 20.0 0.12 0.25 0.4 Cu 0.52.0 31.5 26.0 6.0 0.4

15.0 10.0 3.0 0.18 5.5 4.7 V 1.02.5 13.0 4.6 0.4 0.2 0.18 6.0 0.8 Nb 2.637 20 2.5 Nb 0.6 Cu 3.5

25.4 29.5 0.5 0.75 0.06 0.25 0.6 Cu 0.430 21.5 3.0 0.5 0.65 0.03 0.2 0.9 Cu 2.25

35.3 13.45 6.20 0.22 0.48 0.05 2.542.0 15.0 0.7 1.4 Nb3.028 21 3 0.3 2.1 Cu 1.88.0 15.5 0.07514.0 23.0 0.2 0.5 0.05 1.3 0.008 Cu 0.5

12.5 22 9.0 0.07 1.02.3 20.5 14.2 3.22.5 21.5 9.0 0.05 0.3 0.3 Cb 3.7



44N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP


Designation Designation Ludlum W.-Nr. DIN AFNOR AMSDesignationNickel based alloys Inconel® 690 Nickelvac® 690 2.4642Nickel based alloys Inconel 700 NiCo28Cr15MoAlTi NK27CADTNickel based alloys Inconel 702 5550Nickel based alloys Inconel 706 Allvac® 706 57-2Nickel based alloys Inconel 713 G-NiCr13Al16MoNb 3146.3 NC13AD 5391Nickel based alloys Inconel 718 Allvac 718 ALTEMP® 718 2.4668 NiCr19Fe19NbMo HR8 NC19FeNb 5383Nickel based alloys Inconel 718-OP Allvac 718-OPNickel based alloys Inconel 720 Allvac 720Nickel based alloys Inconel 721Nickel based alloys Inconel 722 Nickelvac W-722 NiCr16FeTi NC16Feti 5541Nickel based alloys Inconel 725Nickel based alloys Inconel 751 Nickelvac X-751 2.4694Nickel based alloys Inconel X-750 Nickelvac X-750 ALTEMP 750 2.4669 NiCr16FetTi NC15FeTNb 5542Nickel based alloys Jessop G 81 NiCr20Co18TiNickel based alloys Jethete M-252 Allvac M-252 G-NiCr19Co 5551Nickel based alloys MAR-M 200 NiW13Co10Cr9AlTi NKW10CATaHfNickel based alloys MAR-M 246 NiCo10W10Cr9AlTiNickel based alloys MAR-M 421 NiCr16Co10WalTiNickel based alloys MAR-M 432 NiCo20Cr16WAlTiNickel based alloys Monel 400 Nickelvac 400 AL 400 2.4360 NiCu30Fe 3072-76 NU30 4544Nickel based alloys Monel K 500 Nickelvac K-500 2.4375 NiCu30Al 3072-76 4676Nickel based alloys Monel R 405 4674Nickel based alloys Nimocast 713 G-NiCr13A16MoNb HC203 NC13AD 5391ANickel based alloys Nimocast PD 16 NiFe33Cr17MoNickel based alloys Nimocast PE 10 HC202 NC20N13Nickel based alloys Nimonic® 105 2.4634 NiCo20Cr15MoAlTi HR3 NCKD20ATV

Nickel based alloys Nimonic 115 2.4636 NiCo15Cr15MoAlTiHR401,

NCVK15ATD601

Nickel based alloys Nimonic 75 2.4630 NiCr20TiHR5,

NC20T203-4

Nickel based alloys Nimonic 80A Nickelvac 80 A 2.4631 NiCr20TiAlHR401,

NC20TA601Nickel based alloys Nimonic 86Nickel based alloys Nimonic 90 Nickelvac N-90 2.4632 NiCr20Co18Ti HR2,202 NCK20TANickel based alloys Nimonic 901 Nickelvac 901 2.4662 NiCr15MoTi Z8NCDT42 5660, 5661Nickel based alloys Nimonic 95Nickel based alloys Nimonic C-22 Nickelvac C-22Nickel based alloys Nimonic C-263 Nickelvac C-263 ALTEMP 263 2.4650 NiCr20CoMoTi HR10 NCK20DNickel based alloys Nimonic C-276 Nickelvac C-276 AL 276 2.4819 ASME SB575Nickel based alloys Nimonic PE 13 NiCr22Fe18Mo HR6,204 NC22FeD 5536ENickel based alloys Nimonic PE 16 NiFe33Cr17Mo HR207 NW11ACNickel based alloys Nimonic PK 25 NKCD20ATU 5751ANickel based alloys Nimonic PK 31Nickel based alloys Nimonic PK 33 NiCr20Co16MoTi 5057 NC19KDU/VNickel based alloys R-235Nickel based alloys Refractaloy 26 Z6NKCDT38 AISI:690Nickel based alloys René 100 NiCo15Cr10MoAlTiNickel based alloys René 125Nickel based alloys René 41 Rene 41 NiCr19Co11MoTi NC19KDT 5712, 5713Nickel based alloys René 63

ATI Metal



N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

45


9.0 29.0 0.2 0.2 0.25 0.007 Cu 0.20.7 28.5 15 3.7 0.3 0.1 0.12 3.0 2.20.4 15.6 0.2 0.05 0.04 3.4 0.7

16.0 0.03 1.8 Cb 2.912 4.5 0.13 6 0.6

17.2 19.0 3.1 0.02 0.5 0.9 Cb 5.217.2 19.0 3.1 0.02 0.5 0.9 Cb 5.2

14.7 18 3 1.25 2.5 58.0 16 0.15 2.25 0.07 0.1 3.0 Cu0.27.0 15.5 0.04 0.7 2.47.5 21 8 0.3 1.5 Nb 3.57.0 15.5 0.2 0.5 0.05 1.2 2.3 0.005 Cb 1.1, Cu 0.27.0 15.5 0.04 0.7 2.5 Cb 0.950.5 16.9 20.6 0.2 0.5 0.08 1.5 2.52.5 10.0 19.0 9.75 0.15 1.0 2.5 B 0.007

10.0 9.0 12.5 0.15 5.0 2.0 Nb1.010.0 9.0 2.5 10.0 0.15 5.5 1.5 Ta1.510.0 15.5 1.7 3.5 0.15 4.25 1.75 Nb1.7520.0 15.5 3 0.15 2.5 4.3 Nb2.0

1.2 0.25 0.15 0.011.0 0.25 0.7 0.1 2.7 0.6 0.011.25 0.25 1.0 0.15 Cu31.5

13.5 4.5 0.12 6.0 0.934.0 16.5 3.3 0.06 1.2 1.23.0 20.0 6.0 2.5 0.030.5 20 14.75 5 0.5 0.5 0.1 4.7 1.2 Cu

13.2 14.2 4 0.16 5 4 Zr

4 20 0.45 0.45 0.45 0.1 0.35 Cu+S

0.55 19.5 0.2 0.55 0.08 1.4 2.4 Cu+S

25 10 Ce 0.030.3 18.0 19.5 0.065 1.4 2.435.0 12.5 6.0 0.05 2.8 B 0.0155.0 18.0 19.5 1.0 1.0 0.1 2.0 3.54.0 1.2 21.2 13.5 3.0 0.04 0.2 0.07 0.01 V 0.17

20.0 20.0 5.85 0.06 0.45 2.155.0 0.5 15.5 16.0 3.5 0.0118.5 1.5 21.75 9 0.6 0.5 0.5 0.11.2 16.5 3.5 0.05 1.2 1.2

19.5 19 4 0.75 0.75 0.08 2.9 2.9 B 0.0114 20 4.5 0.4 2.3 Nb5

0.5 14 18 7 0.25 0.25 0.05 2.1 210.0 1.15 15.0 5.5 0.3 0.1 0.12 20 2.516.0 20.0 18.0 3.2 1.0 0.8 0.03 0.2 2.8

15.0 10.0 3.0 0.18 5.5 4.7 V1.010.0 8.9 2.0 7.0 0.1 4.7 2.5 Hf1.05, Ta3.0

3.0 11.0 19.0 9.75 0.06 1.6 2.5 B 0.0073.5 15.0 14.0 6.0 3.5 0.2 0.1 0.05 3.8 2.5



46N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP


Designation Designation Ludlum W.-Nr. DIN AFNOR AMSDesignationNickel based alloys René 77Nickel based alloys René 80Nickel based alloys René 95 NC14K8Nickel based alloys TRW VIA NiTa9Co8W6CrAlNickel based alloys Udimet® 500 NiCr18CoMoAlTi NCK19DAT AISI:684Nickel based alloys Udimet 520 Allvac® 520Nickel based alloys Udimet 630 NiCr19NbMoNickel based alloys Udimet 700 NiCo15Cr15MoAlTi NCKD20AT AISI:687Nickel based alloys Udimet 710 NCK18TDANickel based alloys Udimet 718 NiCr19Fe19NbMo HR8 NC19FeNb 5583Nickel based alloys Waspaloy Allvac Waspaloy 2.4654 NiCr20Co14MoTi NC20K14 5544


Designation Designation Ludlum W.-Nr. DIN AFNOR AMSDesignationAlpha Titanium alloys Ti-5Al-2.5Sn Allvac® 5-2.5 TiAl5Sn2 TA 14,17 T-A5E ASTM: B 265Alpha Titanium alloys Ti-7Al-4Mo TiAl7Mo4 ASTM: B 381Alpha Titanium alloys Ti-8Al-1Mo-1V Allvac 8-1-1 TiAl8Mo1V1 4915, 4933, 4972Alpha Titanium alloys Ti-6Al-4Zr-2Mo-2Sn Allvac 6-2-4-2 TiAl6Zr4Mo2Sn2 4919, 4975, 4976

Alpha Beta Titanium alloys Ti-6Al-4V Allvac 6-4 TiAl6V4 TA 10-13 T-A6V 4906, 4920,4928,TA 28 4965, 4967

Alpha Beta Titanium alloys Ti-6Al-6V-2Sn Allvac 6-6-2 TiAl6V6Sn2 4971Alpha Beta Titanium alloys Ti-4Al-4Mo-2Sn-0.5Si Allvac 4-4-2 TiAl4Mo4Sn2Si0.5 5103 T-A4DEAlpha Beta Titanium alloys Ti-4Al-4Mo-4Sn-0.5Si TiAl4Mo4Sn4Si0.5 5203Alpha Beta Titanium alloys Ti-7Al-4Mo TiAl7Mo4 ASTM: B 381

Alpha Beta Titanium alloys Ti-6Al-5Zr-0.5Mo-TiA6Zr5Mo0.5Si0.25 T-AGZ-500.25Si

Alpha Beta Titanium alloys Ti-6Al-5Zr-4Mo-Cu- TiAl6Zr5Mo4CuM2010.2Si Si0.2

Alpha Beta Titanium alloys 3-2.5 Allvac 3-2.5 4943, 4944Alpha Beta Titanium alloys 6-4ELI Allvac 6-4ELI 4907, 4930, 4931Alpha Beta Titanium alloys 6-2-4-6 Allvac 6-2-4-6 4981Alpha Beta Titanium alloys Ti-17 Allvac Ti-17 4995Beta Titanium alloys Ti-13V-11Cr-3Al Allvac 13-11-3 TiV13Cr11Al3 4917Beta Titanium alloys Ti-8Mo-8V-2Fe-3Al

Beta Titanium alloysTi-3Al-8V-6Cr-4Mo-

Allvac 38-6444ZrBeta Titanium alloys Ti-11.5Mo-6Zr-4.5SnPure Titanium Ti 99.5 Allvac 70, Ti CP-4 Ti 99.5 TA 6 AIR: 9182 T60 ASTM: B381F4Pure Titanium Ti 99.6 Allvac 55, Ti CP-3 Ti 99.6 AIR: 9182 T50 ASTM: B381F3Pure Titanium Ti 99.7 Allvac 40, Ti CP-2 Ti 99.7a TA 2-5 AIR: 9182 T40 ASTM: B381F2Pure Titanium Ti 99.8 Allvac 30, Ti CP-1 Ti 99.8 TA 1 AIR: 9182 T35 ASTM: B381F1Austempered ductile iron 269-321 EN-GJS-800-8 125/80/10 (grade 1)Austempered ductile iron 269-321 EN-JS1100 850/550/10 (grade 1)Austempered ductile iron 302-363 EN-GJS-1000-5 150/100/7 (grade 2)Austempered ductile iron 302-363 EN-JS1110 1050/700/7 (grade 2)Austempered ductile iron 341-444 EN-GJS-1200-2 175/125/4 (grade 3)Austempered ductile iron 341-444 EN-JS1120 1200/850/4 (grade 4)Austempered ductile iron 444-555 EN-GJS-1400-1 230/185/--- (grade 5)

Austempered ductile iron 444-555 EN-JS-11301600/1300/--(grade 5)

ATI Metal



N


High Temp. Alloys

Hard Materials

Cast Irons

Aluminium & Alloys

Stainless Steels

PH Stainless

Unalloyed Steels

Alloyed Steels

Star Guide

P M K S

HMP

47


0.4 15.0 15.0 4.2 0.1 0.1 0.07 4.3 3.39.5 14.0 4.0 4.0 0.17 3.0 5.08.0 14.0 3.5 3.5 0.15 3.5 2.5 Nb3.57.5 6.0 2.0 5.8 0.13 5.4 1.0 Nb0.5, Ta9.019.0 4.0 0.1 0.1 0.07 3.0 3.012 19 6 1 2 3

18.0 18.0 3.0 0.03 0.5 1.0 Nb6.516.5 15.0 5.0 0.07 4.4 3.415.0 18.0 3.0 1.5 0.07 2.5 5.0

18.0 18.0 3.0 0.05 0.6 1.0 Nb+Ta5.213.0 19.5 4.3 0.05 1.40 3.0 Zr .07

Al Sn Mo V Zr Si Others

5.0 2.57.0 4.08.0 1.0 1.06.0 2.0 2.0 4.0

6.0 4.0

5.5 2.0 5.54.0 2.0 4.0 0.554.0 4.0 4.0 0.57.0 4.0 Fe 0.3

6.0 0.5 5.0 0.25

6.0 4.0 5.0 0.2 Cu 1.0

3.0 2.5 Fe 0.136.0 Fe 0.26.0 2.0 6.0 4.0 Fe 0.105.0 2.0 4.0 2.0 Cr 4.03.0 13.0 Cr 11.03.0 8.0 8.0

3.0 4.0 8.0 4.0 Cr 6.0

4.5 11.5 6.0

Waspaloy is a registered trademark of Pratt & Whitney Aircraft.Vasco, VascoMax, Jethete, Nickelvac, Rene, Allvac and VascoJet are registered trademarks of ATI Properties, Inc.d.b.a. Allvac.


– Notes

48


• Stainless steels, titanium and titanium alloys,nickel based alloys, silicon electrical steels,armor materials and tool steels.

• Titanium based alloys, nickel based and cobalt based alloys, specialty alloys.

• Zirconium, hafnium, niobium, titanium alloys.

• Gray and ductile iron casting. • Carbon and alloy steel forgings. • Specialised machining and finishingfor titanium mill products.

SOLUTIONS FOR DIFFICULT TO MACHINE MATERIALS

ATI Stellram is a business unit of

ATI Metalworking Products, an

operating company of Allegheny

Technologies Incorporated,

a world-leading producer of

titanium and other high

temperature heat resistant

alloys. The company’s tooling

engineers and metallurgists pool

their talents to achieve smarter

solutions for hard to machine

materials. The technology

transfer between the companies

provides an extensive

knowledge base of the metals as

well as cutting tool performance.

“I think we’re the best-kept

secret in the metalworking

business. When customers see

what we can do, they agree with

us,” said David Hogan, President

of ATI Metalworking Products.

“The Allegheny Technologies

connection provides unique

access to both information and

technology, and we use this

every day to help our customers

improve their metal cutting

efficiency.”

“That’s particularly important

for hard to machine materials

like stainless, titanium, nickel

and cobalt based alloys,”

Hogan said.

The trends in industry today

are leading to an increase in

the use of new alloy materials

in products to reduce overall

weight, increase strength,

reduce corrosion and withstand

high temperatures. These

new alloy materials are being

incorporated into products in

aerospace, power generation, oil

& gas, medical and automotive

industries.

“We’ve developed unique

approaches for working these

metals – many of them

exclusive to ATI Stellram.

We will continue to work with

the other divisions of Allegheny

Technologies to provide

exceptional solutions for

metalcutting applications.”

Hogan said.

Our goal is to make the

seemingly impossible machining

challenges possible through our

new product solutions. Our

success is based on increasing

the profitability of your

machining operations.

The ATI AdvantageTechnology Transfer Means Remarkable Knowledge

18298 409CATUSAV1.qxp 6/11/06 9:29 am Page iii

A S S O C I A T E D C O M P A N I E S

Australia

Austria

Belgium

Canada

Denmark

Finland

Holland

Japan

Mexico

New Zealand

Norway

Portugal

South Africa

South Korea

Sweden

Thailand

Allegheny Technologies Incorporated is one of the largest and most diversified specialty metals producers in the world. ATI has approximately 9,300 full-time

employees world-wide who use innovative technologies to offer growing global markets a wide range of specialty metals solutions.

ATI major markets are aerospace and defense, chemical process industry/oil and gas, electrical energy, medical, automotive, food equipment and appliance,

machine and cutting tools, and construction and mining. ATI products include titanium and titanium alloys, nickel-based alloys and superalloys, stainless and

specialty steels, zirconium, hafnium, and niobium, tungsten materials, grain-oriented silicon electrical steel and tool steels, and forgings and castings.

Allegheny Ludlum, Shanghai STAL. Allvac - Allvac Ltd. Wah Chang. Metalworking Products - Alldyne Powder Technologies,

ATI Firth Sterling, Landis Threading Systems, ATI Stellram, ATI Garryson. Rome Metals. Portland Forge. Casting Service.

France

Germany

Switzerland

Great Britain

Italy

Taiwan

USA

METALWORKING PRODUCTSTel: (86-21) 688 68 530Fax: (86-21) 688 68 531

ATI STELLRAM SAS6, Rue du Parc,Blue Business Building74100 AnnemasseTel: 04.50.38.12.12Fax: 04.50.38.09.09

ATI STELLRAM GmbHBorsigstraße 9-11,D-63150 Heusenstamm.Tel: (06104) 682-0Fax: (06104) 682 111

ATI STELLRAM LTDHercules Way, Bowerhill Industrial Estate,GB-Melksham, Wilts. SN12 6TSTel: (01225) 897100Fax: (01225) 897111

ATI STELLRAM SrlStrada Nazionale 71,10020 Cambiano (TO)Tel: 011 944 3111Fax: 011 944 3100

ATI STELLRAM IBERICA S.A.C/ Maracaibo, 7Apdo. Correos 98ES- 28945 FuenlabradaMadrid, SpainTel: 91 606 43 75Fax: 91 615 01 90

ATI STELLRAM SAAvenue du Mont-Blanc 24,Case Postale 339CH-1196 GlandTel: 022 354 97 11Fax: 022 354 97 01

ALLEGHENY TECHNOLOGIES TAIWAN, INC.Room 901, 9th Floor, No. 54, Sec. 4, Mingshen East RoadTaipei, Taiwan 105Tel: (2) 2713-8101Fax: (2) 2545-0688

ATI STELLRAM U.S.A.One Teledyne Place, LaVergne, Tennessee 37086U.S.A. Tel: (615) 641 4200Fax: (800) 223 2219

G L O B A L D I V I S I O N S

SpainChina

© 2006, ATI Stellram, An Allegheny Technologies Company.

The Starburst Logo is a registered trademark of ATI Properties Incorporated.

ATI Stellram is a registered trademark of ATI Stellram S.A.An Allegheny Technologies Company.

Aerostell, Posidisc and Posicut are registered trademarks of ATI Stellram.

Star Guide and Metalcutting Answers are trademarks of ATI Stellram.

All other trademarks are the property of their respective companies.

www.atistellram.com

LITERATURE RE-ORDER NUMBER

11/06 - PRINTED IN THE U.K.230CATUK.V1409CATUSA.V1

For further information please visit the ATI website: www.alleghenytechnologies.comATI STELLRAM U.S.A. 1 TELEDYNE PLACE, LAVERGNE, TENNESSEE, U.S.A. 37086

TEL: 615 641 4200

CUSTOMER ORDER & TECHNICAL TEL: 800 232 1200CUSTOMER ORDER & TECHNICAL FAX: 800 223 2219

CUSTOMER SERVICE CANADA TEL: 800 668 6928CUSTOMER SERVICE CANADA FAX: 800 432 6227

CUSTOMER SERVICE MEXICO TEL: 011 877 756 0947CUSTOMER SERVICE MEXICO FAX: 011 877 285 2505

18298 409CATUSAV1.qxp 6/11/06 9:29 am Page iv

Drilling System - Kennametal · Drilling System 18298 409CATUSAV1 ... ATI Stellram’s new HARDCORE technology offers a unique design so that the optimum carbide grade is used at

Documents