Toshiba’s AC Drill Rig Motor is a force ventilated three-phase alternating-current induction motor for use in the oil and gas industry for land based drilling rig, mud pump, draw-works duty, and fracking applications. Standard Features: • 1150 HP, 40 Hz / 1500 HP, 45 Hz • -40°C to 45°C Ambient Temperature • IP44, Force Ventilated Blower Cooled Enclosure • 6-Pole Stator with Form Wound Windings • VPI, Class H Insulation, Mica-Kapton System • Six RTDs; 100 Ohm Platinum, Two per Phase • Copper Chromium Alloy Rotor Bars • Insulated Bearings on Both Ends with Ground Strap • Field-modifiable IP56 Main Terminal Box with Bus Bar Connections for Main Cables & Terminals for RTDs; Suitable for F-1 & F-2 • Space Heater • Keyless Tapered 4340 Alloy Shaft • Single Shaft Extension with Oil Field Hub • Drop-in Replacement 1150 HP Continuous Rating Intermittent Drawworks Duty Cycle Volts (AC) 600/690 600/690 Current (A) 1088 1290 HP 1150 1400 RPM @ Rated HP 800 to 1800 800 to 1600 Torque (lb-ft) 7645 9367 1500 HP Continuous Rating Intermittent Drawworks Duty Cycle Volts (AC) 600/690 600/690 Current (A) 1316 1655 HP 1500 1830 RPM @ Rated HP 900 to 1200 800 Torque (lb-ft) 8902 12244 DRILL RIG LOW VOLTAGE MOTOR