Technical Supporting Web NuMicro™ Family Series http://www.nuvoton.com/NuMicro 80C51 8-bit MCU Series http://www.nuvoton.com/80C51 ARM7_9 Series http://www.nuvoton.com/ARM7_9 Discussion Forum 牛臥堂 M0 http://www.nuvoton-m0.com/forum.php More product details and update information please visit our website www.nuvoton.com
16
Embed
Discussion Forum - ChipCAD · Discussion Forum 牛臥堂 M0 ... NuMicro™ Family is Nuvoton's brand-new 32-bit Microcontroller product line based on the ARM® Cortex™-M0 with ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Technical Supporting Web
NuMicro™ Family Series http://www.nuvoton.com/NuMicro
80C51 8-bit MCU Series http://www.nuvoton.com/80C51
Mini51 SeriesNuMicro Mini ™ series embeds ARM® Cortex™-M0 core running up to 24MHz and with 4K/8K/16K-byte embedded �ash program memory,
2K-byte embedded SRAM and 2K-byte �ash loader memory for In System Programming (ISP) function. It is also equipped with plenty of
peripheral devices, such as I/O Ports, Timers, UART, SPI, I2C, PWM, ADC, Watchdog Timer and Low Voltage Reset.
A single-chip low pin count 32-bit microcontroller designed for applications demanding high performance, high-integration and cost-effective requirements
Features : Wide operating voltage: 2.5~5.5V, Temperature: -40°C ~ +85°C, Built-in data-flash, and Internal 22MHz RC oscillator (Dynamic trim the 22.1184MHz RC oscillator to 1% accuracy by external 32.768K crystal oscillator). PWM support edge/center-aligned mode and fault detection.Potential Applications : Cost-effective Microcontroller, Auto-control System, Data Communications, Industrial Control, etc.
New
Part No. Flash SRAMData Flash
ShareAP ROM
PWM 12 bitADC
ISPICP
IRC10KHz/12MHz
PackageISP
LoaderROM
EBI
Nano100 Base Line (Ultra Low Power)
NANO100SD2AN
NANO100SC2AN
NANO100LD3AN
NANO100LC2AN
LQFP64*LQFP64*LQFP48LQFP48
TouchKey
8844
vvvv
vvvv
vv--
Timer
4x32-bit4x32-bit4x32-bit4x32-bit
I/O
up to 53up to 53up to 39up to 39
4K4K4K4K
8K8K
16K8K
0~32K0~16K0~32K0~16K
64K32K64K32K
8844
8888
12 bitDAC
SmartCard
2222
2222
I2S
1111
Connectivity
SPI I2C
2222
USB
----
UART
2222
3333
RTC
vvvv
PDMA
4444
LCD
NANO100VD3AN LQFP10016 vvv4x32-bitup to 864K16K 0~32K64K 8 8 2 212 -2 3 v 4 -NANO100VD2AN LQFP10016 vvv4x32-bitup to 864K8K 0~32K64K 8 8 2 212 -2 3 v 4 -
----
Part No. Flash SRAMData Flash
ShareAP ROM
PWM 12 bitADC
ISPICP
IRC10KHz/12MHz
PackageISP
LoaderROM
EBI
Nano130 Advanced Line (Ultra Low Power)
NANO130VD3AN LQFP100LQFP100
TouchKey
1616
vv
vv
vv
Timer
4x32-bit4x32-bit
I/O
up to 41up to 41
4K4K
16K8K
0~32K0~32K
64K64K
88
88
12 bitDAC
SmartCard
22
22
I2S
11
Connectivity
SPI I2C
22
USB
11
UART
22
22
RTC
vv
PDMA
44
LCD
4x404x40
NANO130VC2AN
NANO130VD2AN
LQFP10016 vvv4x32-bitup to 414K8K 0~16K32K 8 8 2 212 12 2 v 4 4x40
Nano SeriesNuMicro Nano™ series embeds ARM® Cortex™-M0 core running up to 32MHz frequency with 32K/64K-byte embedded �ash and 8K/16K-byte
embedded SRAM and 4K-byte loader ROM for In System Programming (ISP) function. It integrates LCD controller, RTC, 12-bit SAR ADC, 12-bit
DAC, capacitive touch-key, UART, SPI, I2C, I2S, USB 2.0 FS device, ISO-7816-3 and support fast wake up via all peripheral interfaces.
Features : Low operating voltage: 1.8~3.6V, Run mode: 250uA/MHz, RTC mode: 3uA, Power down mode with RAM retention: 1.5uA.Potential Applications : Battery-Powered Applications.
Ideal for analog and digital sensor monitoring applications
Ideal for hand-held data collection applications
Part No. Flash SRAMData Flash
ShareAP ROM
PWM 12 bitADC
ISPICP
IRC10KHz/12MHz
PackageISP
LoaderROM
EBI
Nano120 USB Connectivity Line (Ultra Low Power)
NANO120LD3AN LQFP48
TouchKey
4 vv-
Timer
4x32-bit
I/O
up to 354K16K 0~32K64K 4 8
12 bitDAC
SmartCard
2 2
I2S
1
Connectivity
SPI I2C
2
USB
1
UART
2 3
RTC
v
PDMA
4
LCD
-NANO120LC2AN LQFP484 vv-4x32-bitup to 354K8K 0~16K32K 4 8 2 212 12 3 v 4 -
Ideal for data streaming applications
Part No. Flash SRAMData Flash
ShareAP ROM
PWM 12 bitADC
ISPICP
IRC10KHz/12MHz
PackageISP
LoaderROM
EBI
Nano110 LCD Line (Ultra Low Power)
NANO110VD3AN LQFP100
TouchKey
16 vv-
Timer
4x32-bit
I/O
up to 464K16K 0~32K64K 8 8
12 bitDAC
SmartCard
2 2
I2S
1
Connectivity
SPI I2C
2
USB
-
UART
2 2
RTC
v
PDMA
4
LCD
4x40NANO110VC2AN LQFP10016 vv-4x32-bitup to 464K8K 0~16K32K 8 8 2 212 -2 2 v 4 4x40
Ideal for utility metering applications*LQFP64: 7 X 7mm
NAn Evaluation/Development Kit for NuMicroIAR EWARM/Keil RV/MDK available on IAR/Keil websiteSupport On-line ICP (In-Circuit Programming)
NuTiny-SDKNuTiny-SDKAn Evaluation/Development Kit for NuMicroIAR EWARM v5.5x (evaluation version) includedKeil MDK-ARM (evaluation version) included Examples with source code included Support On-line and Off-line ICP (In-Circuit Programming)
NuMicro-SDK
Cortex™-M0 NuMicro
ICE Bridge Support USB to SWD 2-Pin ICE Bridge debug connection USB Plug and Play - Support Standard Windows USB driverIn-Circuit Programming (ICP) Support Target System firmware upgrade function On-line or Off-line Mode
• An Evaluation/Development Kit for NuMicro• IAR EWARM v5.5x (evaluation version) included • Keil MDK-ARM (evaluation version) included • Examples with source code included • Support On-line and Off-line ICP (In-Circuit Programming)
• An Evaluation/Development Kit for NuMicro • IAR EWARM/Keil RV/MDK available on IAR/Keil website • Support On-line ICP (In-Circuit Programming)
• An Evaluation/Development Kit for NuMicro • IAR EWARM/Keil RV/MDK available on IAR/Keil website • Support On-line ICP (In-Circuit Programming)
• An Evaluation/Development Kit for NuMicro • IAR EWARM/Keil RV/MDK available on IAR/Keil website • Support On-line ICP (In-Circuit Programming)
• USB ←→ SWD bridge • Support On-line and Off-line ICP (In-Circuit Programming)• USB Plug & Play
Development Tools for NuMicro™ Family
NuTiny-SDK-NUC140• Nu-Link-ME • NuTiny-EVB-NUC140• USB Cable
• An Evaluation/Development Kit for NuMicro• IAR EWARM/Keil RV/MDK available on IAR/Keil website• Support On-line ICP (In-Circuit Programming)
SDK (Software Development Kit)
Nu-Link
NuTiny-SDK-M051• Nu-Link-ME • NuTiny-EVB-M051• USB Cable
• An Evaluation/Development Kit for NuMicro M051 series• IAR EWARM/Keil RV/MDK available on IAR/Keil website• Support On-line ICP (In-Circuit Programming)
• An Evaluation/Development Board for NuMicro• SWD port for Nu-Link or Nu-Link-ME• JTAG port for U-Link or J-Link • Connect to Laptop via Nu-Link USB for debugging on the fly
Development Tools for NuMicro™ Family
Nu-LB-NUC140
Nu-IAR-SKT
Nu-Keil-SKT
Nu-LB-M051
NuGang-NUC100-LQFP48
NuGang-NUC100-LQFP64
NuGang-NUC100-LQFP100
• Nu-LB-NUC140• USB Cable
• NUC140-SK• USB Cable• Setup CD
• U-LINK-ME• MCBNUC1XX• USB Cable• Setup CD
• Nu-LB-M0516• USB Cable
• NuGang-Mother board• NuGang-Adapter-NUC100-LQFP48• USB cable
• NuGang-Mother board• NuGang-Adapter-NUC100-LQFP64• USB cable • NuGang-Mother board• NuGang-Adapter-NUC100-LQFP100• USB cable
• NuGang-Mother board• NuGang-Adapter-M051-QFN33• USB cable • NuGang-Mother board• NuGang-Adapter-M051-LQFP48• USB cable
NuGang-M051-QFN33
NuGang-M051-LQFP48
NUC100NUC120NUC130NUC140
M052M054M058
M0516
NUC100NUC120NUC130NUC140
NUC100NUC120NUC130NUC140
NUC100/120/130/140 with LQFP48
NUC100/120/130/140 with LQFP64
NUC100/120/130/140 with LQFP100
M052/54/58/516 with QFN33
M052/54/58/516 with LQFP48
• A Starter Kit made by Nuvoton• IAR EWARM v5.5x (evaluation version) included• Keil MDK-ARM (evaluation version) included• Examples with source code included• NuMicro Family CD
• Starter Kit made by IAR• IAR EWARM (evaluation version) included• IAR C/C++ Compiler included• USB Plug & Play
• Starter Kit made by Keil • Keil MDK –ARM (evaluation version) included • ARM C/C++ Compiler included• USB Plug & Play
• A Starter Kit made by Nuvoton• IAR EWARM v5.5x (evaluation version) included• Keil MDK-ARM (evaluation version) included• Examples with source code included• NuMicro Family CD
• Support NuMicro NUC100 series device • 4-chip gang programming • Support Off-line programming• USB Plug & Play to PC or Laptop
• Support NuMicro M051 series device • 4-chip gang programming • Support Off-line programming• USB Plug & Play to PC or Laptop
Learning Board (LB)
3rd Party Starter KiT (SKT)
NuMicro NUC100 Series Gang Writer (NuGang)
NuMicro M051 Series Gang Writer (NuGang)
Evaluation/Development Board (EVB)
7
Part No. NUC745 NUC501
ARM Development ToolARM7
ARM ADS 1.2/Keil/IAR/GNUDriver Library, Driver Sample Code / Tool
Linux 2.6.17Linux 2.6.17 / Linux 2.6.35Linux 2.6.17Linux 2.6.17
ARM9
SDK
uClinux
SDK
WinCE 5.0 / 6.0 BSP
Linux
Nuvoton provides a series of network connected processors with feature rich peripherals (Ethernet MAC, USB host/device, LCD controller,
AC97/I2S and SDHC2.0, etc.) based on ARM7TDMI and ARM926 to let customers implement their innovative products in a timely manner. A complete development environment is provided for each platform. Source codes of the BSP drivers under Linux / WinCE are all provided to shorten the design cycle times.
Features rich, best-in-class Cost/Performance, comprehensive development tools and complete OS support
1. Commercial (C) is 0ºC to +70ºC, Industrial (I) is -40ºC to +85ºC, Extended (E) is -40ºC to +105ºC. 2. VDD18 for Core Logic: 1.8V+/-10%, VDD33 for IO Buffer: 3.3V+/-5%, USBVDDC0/USBVDDC1/USBVDDT0/USBVDDT1 for USB: 3.3V+/-5%, PLLVDD18 for PLL: 1.8V+/-10%
As a leading supplier of 8051 microcontrollers, Nuvoton o�ers a wide range of parts that meets the price/performance demand of industrial and consumer products. The 8-bit MCU are supported by leading tool makers for rapid product development and equipped with rich peripherals to meet various system requirement.
Features : Standard 12T/6T 80C52, Wide operating voltage: 2.4~5.5V, Temperature: -40°C ~ +85°C, Built-in UART, SPI, Internal RC oscillator, and ISP function.Potential Applications : Bar Code Reader, Key Phone, KVM, 2.4G Wireless Keyboard, IPC, Monitor, Security System, etc.
Features : Industry 4T 80C52. Wide operating voltage: 2.4~5.5V, Temperature: -40°C ~ +85°C, Highly intergraded peripherals with ADC, BOR, Data flash, I2C, UART, SPI, Internal RC oscillator, and ICP / ISP on-line update.Potential Applications : Temperature Sensor, iPod Docking, Projector, DVD Player, E-balance, Security, Power Control, Small HA, etc.
11
SMS, Public Phone and Security Processor (4T 8051) Series
Features : Industry standard 4T 80C52, dual clock system. Wide operating voltage: 2.4~5.5V, Up to 256KB Flash, 256+8KB SRAM Built-in DTMF generator, FSK generator and CAS generator for CID Compatible with Bellcore TR-NWT-000030 & SR-TSV-002476, British Telecom(BT) SIN227, U.K. Cable Communication Association(CCA) specification.Potential Applications : CID Adjusted Box, SMS Phone, Public Phone, etc.