December 1, 2008Dec 01, 2008 Texas Nodal Market Implementation Nodal System Operations Test Environment (SOTE) SOTE Launch WebEx
December 1, 2008Dec 01, 2008
Texas Nodal Market Implementation
Nodal System Operations Test Environment (SOTE)
SOTE Launch WebEx
December 1, 2008 2
Agenda
• ERCOT anti-trust admonition
• TSP roll call
• Introduction to Nodal SOTE
• SOTE support information
December 1, 2008 3
ERCOT Anti-Trust Admonition
ERCOT strictly prohibits Market Participants and their employees who are participating in ERCOT activities from using their participation in ERCOT activities as a forum for engaging in practices or communications that violate the antitrust laws. The ERCOT Board has approved guidelines for members of ERCOT Committees, Subcommittees and Working Groups to be reviewed and followed by each Market Participant attending ERCOT meetings. If you have not received a copy of these Guidelines, copies are available at the Client Relations desk. Please remember your ongoing obligation to comply with all applicable laws, including the antitrust laws.
December 1, 2008 4
Accessing SOTE
• To access the SOTE environment, please use one of the following links
https://citrixtaylor.ercot.com
ORhttps://citrixaustin.ercot.com
• Click on “SOTEEMS” after logging into Citrix• Password for SOTEEMS and Citrix is the same
(unlike Zonal MOTE)• Please refer to the Citrix Logon Instructions
guide for details on configuring and accessing ERCOT applications through Citrix
• If you require a copy of the Citrix Logon Instructions guide, please email [email protected]
December 1, 2008 5
SOTE cases available for review by TSPs starting Dec 1, 2008
Market Operations Test Environment / Systems Operations Test Environment
• RTNET & STNET– SE Solution:– State estimator solution– Modified date indicates when the solution was completed– Will be 2 savecases: RTNET and STNET.
• RTNET savecase will allow MPs to see the telemeter data.• STNET savecase will allow MPs to modify case for their studies
• Base Case:– Is an ENTIRE STNET case “OPS_BASECASE”
• NETMOM• CTGS• RASMOM• Options & Settings• And others
– Should be loaded prior to running STCA– Only needs to be loaded after an ERCOT database load.
The Network Model currently in Nodal SOTE is a converted Zonal Model
December 1, 2008 6
SOTE cases available in the future (closer to go live)
Market Operations Test Environment / Systems Operations Test Environment• Current Case:– A daily snapshot of our model– Always ahead of what is in the production system.
• Transfer Case:– OC_TRANS1 to 34– Specific outage study
• These two case types are currently available in Zonal MOTE.
December 1, 2008 7
December 1, 2008 8
Stop Application
December 1, 2008 9
Indicates process has stopped
December 1, 2008 10
Push to load new case
December 1, 2008 11
Push to Continue
December 1, 2008 12
Right Click to get dropdown.Select Retrieve.
NOTE: Update will save the case presently in your clone over the case you have selected – Careful!
This display is sometimes static from the last time a case was retrieved.
If you wish only to see the time-stamp of the latest available file then push “Update List”.
Otherwise, when you Retrieve a case, the display will auto-update the timestamp of the file being retrieved.
December 1, 2008 13
Select OK
December 1, 2008 14
The Basecase has been loaded as shown by the pop-up below. Click OK.
Now repeat for the STNET “REALTIME_MARKET_SESOLUTION” Right Click to get dropdown. Select Retrieve.
December 1, 2008 15
Select OK
December 1, 2008 16
Select OK… all STNET displays
are updated.
Select this icon which directs to relative displays… The relative display at this point is theSavecase Application Directory, for which we will load the RTNET case.
December 1, 2008 17
Select RTNET
December 1, 2008 18
Now repeat for the RTNET “REALTIME_MARKET_SESOLUTION”Right Click to get dropdown. Select Retrieve.After the two pop-ups are“OK”ed… All RTNET displays are updated.
Note: only one RTNET Clone exists for everyone, therefore when one person retrieves a new RTNET case, all others have their RTNET displays updated.
After cases are loaded, you may wish to click on this folder icon to search manually generated onelines with analogs filled from the loaded RTNET case. The screen will split vertically as shown here… User must select Application “RTNET” and all available onelines will appear. Select station to view one-line.
December 1, 2008 19
Indicates valid solution
Displays are updated after loading a case, Run Solution is not required
unless if you are manipulating equipment or options for your own
study
If you wish to temporarily save your study, go to Data Retieval
December 1, 2008 20
Saving a case is allowed, but will only be kept until midnight. Simply type the case name and click Save.All characters will be saved to uppercase.
December 1, 2008 21
Select STCA, and “Run Solution Sequence” to run Contingency Analysis
This may take a few minutes
Indicates CA is complete
December 1, 2008 22
Go here to view CA results
December 1, 2008 23
Click here to view results by company
December 1, 2008 24
At any time, you can search manually
generated onelines. Here, the user selected
Application “STNET” and all available onelines will
appear.Select station to view
one-line.
December 1, 2008 25
Click here to open new viewport
December 1, 2008 26
Type in next letter
Select to create new viewport
Select to viewport tab
December 1, 2008 27
Support
• Email [email protected] if you have connectivity issues or need access, with subject line “SOTE access issue, please forward to IT Production Support” and copy [email protected]
• Email [email protected] if you have questions on modeling
• Email [email protected] for any questions on State Estimator, Power Flow and related operational issues
• Every effort will be made to support the application during business hours Monday through Friday
• SOTE environment will be available for TSP access 7 x 24, except for scheduled maintenance
You may contact AREVA for detailed training on the STNET or other AREVA software
December 1, 2008 28
Questions?