Store in a cool, dry place. Shelf life is 12 months if properly stored in the original unopened container. Storage and Shelf Life Description DAVCO K10 PLUS PH is a flexible single pack water – based waterproofing and sealing membrane which is capable of curing in approximately 4-8 hours depending on the number of coats and temperature. Advantages • Single pack, Easy to use • Excellent curing • UV resistant • Superb elongation • Excellent tensile strength • Anti – fracture, no blistering • No tar, no bitumen, non – toxic Colors Grey, White, and Beige Technical Data Appearance : Thick pasty liquid Solid content : 60 – 70% Adhesion to concrete : 1.0 MPa Hardness (Shore A) : 80 Curing time at 30°C : 4-8 hours Crack Bridging (ASTM C836) : > 2mm Elongation : 300 - 500% at 28 days *Specifications are subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions. Coverage Approximately 0.7kg/m 2 /coat (depending on site condition) Packaging 4L and 16L pail Precautions • Temperature range to use: 10°C to 35°C • Do not use where negative hydrostatic pressure is evident. • Surfaces must not allow water to stagnate or form a pond. • Clean brushes, rollers and trays with water before product dries. • Do not mix sand and admixtures to DAVCO K10 PLUS PH. Uses • Ideal for waterproofing of facades, terraces, balconies and wet areas • Ideal for waterproofing of concrete roofs • For internal and external use
2
Embed
DAVCO K10 PLUS PH FINAL Documents/Products/DAVCO K10 PLUS P… · DAVCO K10 PLUS PH is a flexible single pack water – based waterproofing and sealing membrane which is capable of
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Store in a cool, dry place. Shelf life is 12 months if properly stored in the original unopened container.
Storage and Shelf Life
DescriptionDAVCO K10 PLUS PH is a flexible single pack water – based waterproofing and sealing membrane which is capable of curing in approximately 4-8 hours depending on the number of coats and temperature.
Advantages• Single pack, Easy to use• Excellent curing• UV resistant • Superb elongation• Excellent tensile strength • Anti – fracture, no blistering • No tar, no bitumen, non – toxic
ColorsGrey, White, and Beige
Technical DataAppearance : Thick pasty liquidSolid content : 60 – 70%Adhesion to concrete : 1.0 MPaHardness (Shore A) : 80Curing time at 30°C : 4-8 hoursCrack Bridging (ASTM C836) : > 2mmElongation : 300 - 500% at 28 days
*Specifications are subject to change without notification. Resultsshown are typical but reflect test procedures used. Actual fieldperformance will depend on installation methods and site conditions.
CoverageApproximately 0.7kg/m2/coat (depending on site condition)
Packaging4L and 16L pail
Precautions• Temperature range to use: 10°C to 35°C• Do not use where negative hydrostatic pressure is evident.• Surfaces must not allow water to stagnate or form a pond.• Clean brushes, rollers and trays with water before product dries.• Do not mix sand and admixtures to DAVCO K10 PLUS PH.
How To UseSurface Preparation: Concrete• All new concrete slabs must be allowed to cure for at least 6 weeks.• Old concrete must be cleaned with a strong commercial grade detergent or de-greaser. Thoroughly wash off all residue with clean water and allow the surface to dry for at least 24 hours.
Product preparation:• No dilution / mixing with water is required when using DAVCO K10 PLUS PH.• Body Coat/Top Coat: Stir the product well before using.
Priming:• For smooth finished surfaces / substrates, old concrete and G.I roofs, use DAVCO K10 ACRYLIC PRIMER.
Application:• All substrates must be cleaned and sound prior to waterproofing.• The substrate must be visibly dry.• Spread DAVCO K10 PLUS PH onto the substrate using a roller, brush, steel trowel or spray.• Apply in a thin layer over the area to be waterproofed.• Allow 1 to 2 hours in between each coat depending on thickness and atmospheric conditions.• Recommended coverage is 0.7kg/m2 @ 0.7mm thick in minimum 2 coats.• Minimum thickness for roofdecks is 2mm of the applied product.• Tools and excess DAVCO K10 PLUS PH must be cleaned up while still wet.