Blister Sealing Machine « « BSA BSA » » Westfalenstr. 27 • D 58455 Witten • Tel: +49-(0)2302-28 25 3-0 • Fax: +49-(0)2302-28 25 3-28 • [email protected] • www.zappe-gmbh.de Purpose: • Sealing of blister caps against blister cardboards (classic style) or paper for sales packs • Producing sterile packs for implants, syringes, medicine etc. (PET-Blister against Tyvek or medicine paper) Operating elements: Infinitely adjustable sealing temperature, time and pressure ZAPPE ZAPPE VERP VERP ACKUNGSMA ACKUNGSMA SCHINEN SCHINEN Operations: An already formed blister cap, loaded with products will be placed upside down into the sealing tool and covered by a blister cardboard or Tyvek paper. The operator pushes a two-hand button and the sealing table turns by 180° into the sealing station and starts automatically the sealing process. The heated sealing stamps presses the packing materials into the sealing tool and seals the blister. Meanwhile the operator removes the finished packs out of the second tool, which stands in front of the machine now, and reloads the tool again. After the stamp has released, the operator starts the machine again. Depending on pack’s size several packs can be packed at the same time. Technical datas: BSA – 2535 BSA – 3550 BSA – 5070 Sealing size: 250 x 350 mm 350 x 500 mm 500 x 700 mm Max. height of blister: max. 80 mm max. 120 mm max. 120 mm Heating capacity: 2 kW 4 kW 8 kW Compressed air: 6 bar 6 bar 6 bar Electric power: 400 V, 50/60 Hz Machine’s size: approx. 1,2 x approx. 1,6 x approx. 2 x 2 m 2 1,2 m 2 1,6 m 2 (Subject to change) 1 2 1. BSA – 3550 with 4 stations 2. BSA – 2535 with 4 stations: including automatic cardboard, unloader and indexing conveyor belt