CURRICULUM VITEA (WFFWA)

CURRICULUM VITEA (WFFWA)

i. PERSONAL PARTICULARS (PP)

Name

Ts. DR. WAN FAHMIN FAIZ BIN WAN ALI

Current Position

Senior Lecturer

Faculty / Department

Materials, Manufacturing and Industrial Eng., School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia (UTM) 81310 UTM-JB, Johor Malaysia

Contact

60179051967

Email i- [email protected]

ii- [email protected] iii- [email protected]

Research ID Google Scholar Citation Index:

https://scholar.google.com/citations?user=mt87BDYAAAAJ&hl=en

(H-Index 8) Research gate link:

https://www.researchgate.net/profile/Wan_Fahmin_Faiz_Wan_Ali2

ORCID http://orcid.org/0000-0003-3935-0983

Research Interest

Advanced Materials, Solid State Interest, Dielectric and Magnetic Materials, Microwave Sintering, Dielectric Resonator Antenna (DRA), Metal Casting, Hot Dip Galvanizing, Density Functional Theory (DFT), Design of Experiment (DOE), Electroceramics, Hard Materials, Microbiological Induced Corrosion (MIC), Failure Analysis, Structural Integrity,

ii. ACADEMIC AND PROFESSIONAL QUALIFICATIONS (APQ)

Degree Discipline / Dissertation

University Year

PhD

Advanced Materials Response Surface Method Optimization for the Formation of Yttrium Iron Garnet And Its Kinetic Studies for Dielectric Resonator Antenna Application Made by Solid State Sintering

Universiti Sains Malaysia (USM), Penang Malaysia

2015

MSc

Materials Engineering Synthesis and Characterization of High Dielectric Zirconate Based Materials Doped with Strontium via Sol-Gel Route for Dielectric Resonator Antenna Application


2011

BEng. (Hons)

Materials Engineering Synthesis and Characterization of High Dielectric Ba1-XNdxTio3 (X = 0.07) Films for Dielectric Resonator Antenna Applications.


2011


iii. WORKING EXPERIENCE (WE)

Summary

Cumulative Working experience (year/month)

USM UTM UTP Total WE

> 5y

1y9m 4y - 2m

Year

Field of Work Place Description

July 2016 – Present

Teach and Research

Department of Materials, Manufacturing and Industrial

Engineering, Faculty Mechanical Engineering,

Universiti Teknologi Malaysia (UTM)

Teach and supervise both undergraduate and postgraduate

Research (Multidisciplinary) Coordinator and Reviewer

April 2016 – July 2016

Research

Department of Fundamental and Applied Sciences, University Teknologi PETRONAS (UTP)

Researcher Setup mini-scale EOR system

Grant and Paper Writing Research related with EOR and DFT

Oct 2014 – March 2016

Research

School of Materials and Mineral Resources

Engineering, Universiti Sains Malaysia (USM)

Research Officer (RO) (Multidisciplinary), Tutor and Lab

assistant, Grant and Paper Writing

Aug 2011 – Dec 2011

Research

School of Electrical and Electronics Engineering, Universiti Sains Malaysia

(USM)

Research assistant (RA) Collecting data

Assist PhD student

iv. PROFESSIONAL AFFILIATIONS (PA)

Summary International Member National Member Total PA 7 3 4

Membership

Professional Membership Membership No.

Graduate Member Board of Engineer Malaysia (BEM) 69863A Ordinary Member The Minerals, Metals and Materials Society (TMS) 526426 Lifetime Member International Association of Engineers (IAENG) 173294 Lifetime Member Institute of Materials Malaysia (IMM) O-07161 Lifetime Member X-ray Application Malaysia Society (XAPP) XAPP20181 Professional Member Institute Materials, Mineral and Mining (IOM3) 477789

Professional Technologist

Malaysia Board of Technologist (MBOT) PT20120208

v. HONORS AND AWARDS (HA)

Summary (2007 – present)

International National Total HA

3 13 16

Year Honours and Awards

2020

Silver-22nd Industrial Art and Technology Exhibition (INATEX) 2020 Excellent Service Awards (UTM-Citra Karisma)

2019 Best Paper Award in 5th ICMER’19 Excellent Service Awards (Faculty of Engineering)

2018-2020 UTM Award of Excellence 2019 “Active Blended Learning Course”

2018 Best Poster Presenter in ICXRI'18

2017 UTM Award of Excellence 2017 “Active Blended Learning Course”

2011, 2013, 2015, 2016

USM - Sanggar Sanjung Award (Top 15% Journal – Category Publication)

2012 Golden Key International Honour Society Award (Being top 15% in USM)


2011 Best student of USM Materials Engineering (Master of Science - Mix mode Program)

2008, 2010 Dean’s List, School of Materials and Mineral Resources Engineering, USM

2007 - 2009 Commandant List (USM Reserve Officer Training Unit-ROTU)

1.0. TEACHING AND SUPERVISION (TS)

Summary (2016 – present)

Teach (courses)

UG

6

Supervised (cumulative)

UG 25 PG 1 PG 10

Total 7 35

1.1 Undergraduate and Postgraduate Courses

No Course Title / Level

Level

1 SKMM1913/SEMM1913 Experimental Techniques (1st Year - Undergraduate) 2 SKMM2013/SEM2921 Materials Science Laboratory (2nd Year - Undergraduate)

3 SKMM2613/SEMB2613 Materials Science (2nd Year- Undergraduate)

4 SKMB3602/SEMB3603 Physical Metallurgy (3rd Year - Undergraduate) 5 SKMM3931/SEMM3931 Manufacturing Laboratory (3rd Year - Undergraduate)

6 SKMB4603/SEMB4603 Non-Destructive Testing (NDT) (4th Year - Undergraduate)

7 MKMB2603/MEEM2603 Materials Testing and Quality (Master -Postgraduate)

1.2 Undergraduate and Postgraduate Courses

Level No. of Student

Main Supervisor Co Supervisor

Undergraduate 25

17 Graduated 0

Graduated

8 Ongoing Ongoing

Total 25 (17 graduated)

Postgraduate

i. Master by Taught course / Mix mode 2 Graduated

4 4 Graduated

2 Ongoing Ongoing

ii. Master by Research 1 Graduated

0 Graduated

1 Ongoing Ongoing

iii. PhD 0 Graduated

3 Graduated

Ongoing 3 Ongoing

Total 10 (7 ongoing, 3 graduated)

List of students are shown in Appendix 1

2.0. GRANTS, CONSULSTATION AND PUBLICATIONS (GCP)

Summary RG

(2016 – Present)

PI

National

3 RM 373,800.00

Total RG RM 1,149,605.00

International 1 RM 20,112.50

Member National 19 RM 938,665.00

International 1 RM 17,940.00


2.1 Research Grant (RG)

No Title Role Source / Amount Duration Status

1. Characterization of Functionally Graded Alloys (FGAs)

Project Leader

RM 133,000.00 UTMICONIC

1/7/2020 -30/6/2023

Ongoing

2. Hybrid Nanocomposite Coating of Reduced Graphene Oxide Molybdenum Disulphide in Bismaleimide Matrix for Resilient Contact Systems

Project Leader

RM 20112.50 Nippon Sheet Glass (NSG)

1/1/2021 -

31/12/2021 Ongoing

3. New Damage-based Constitutive Equations for Strain Aging Phenomenon in Stranded Wire Ropes

Project Leader

RM 180,800.00 Fundamental

Research Grant (KPT-FRGS)

1/11/2020 -

31/10/2023 Ongoing

4. Synthesis and Characterization of ZnO-RGO Embedded with Green Super Adsorbent for Dye Wastewater Treatment

Member RM 30,000.00

Encouragement Research (UTMER)

1/11/2019 -

31/10/2021 Ongoing

5. Evaluation of High-Speed Machining and Micromachining Of Bulk Aerospace Material Fabricated By Direct Metal Laser Deposition Process

Member RM 150,000.00 Encouragement

Research (UTMER)

1/1/2020 -

31/12/2022 Ongoing

6. Investigation on The Effect Of Nutrient Alloying Elements In Biodegradable Mg-Based Orthopaedic Implant

Member RM 30,000.00

Encouragement Research (UTMER)

1/11/2019 -

31/10/2021 Ongoing

7. Investigation of Nanomaterial Growth on High-Mobility Substrate Using Chemical Vapour Deposition with Flame-Enhanced Technique

Member



1/9/2019 –

31/03/2022 Ongoing

8. Corrosion inhibition and antibacterial behaviour of biodegradable magnesium alloy coated with PCL incorporated with antibacterial agents for orthopaedic implant applications

Member

RM 50,000.00 Industry-Private

Grant Kiswire Sdn Bhd

Jun 2019 –

May 2021 Ongoing

9. Technology Transfer of Water Tap Saver to Skudai Community - Water Tap

Member RM 5,000.00

UTM Knowledge Transfer Program

Feb 2019 - July 2019

Ongoing

10. Pembangunan Pusat Latihan Kakisan UTM-MACH3 Member

RM 5,000.00 UTM Knowledge Transfer Program

Feb 2019 - July 2019

Completed

11. Synthesis and Characterization of Ordered Structure of Transition Metal-Based Nanoparticle and its catalytic activity on direct borohydride fuel cells

Member



2019 - 2020

Ongoing

12. Microstructural and corrosion investigation of GO/CNT nanostructured coating on porous Ti-30 at. % Ta shape memory alloys for biomedical application

Member



2019 - 2020

Ongoing

13. Coating Characterization of Carbide Cutting Tools

Member

RM 70,000.00 High Impact

Research Grant (UTMHIR)

2018 - 2021

Ongoing

14. Medical Device for the Treatment of Mental Illness for Malaysian Patient Member

RM 40,000.00 Transdisciplinary Grant (UTMTDR)

2018 -2020 Ongoing

15. Performance Evaluation of High-Speed Machining of Metal Epoxy Composite (MEC) Materials

Member RM 40,000.00

Transdisciplinary Grant (UTMTDR)

2018 -2020 Ongoing


16. The Effect of Alloying Elements and Reaction Layer on the Fatigue Performance and Corrosion Behaviour of Coated Steel Ropes

Member RM 40,000.00

Transdisciplinary Grant (UTMTDR)

2018 -2020 Ongoing

17. Optimization of Cold-Drawn Steel Wire Rope Member


2018 -2020 Ongoing

18. Welding of Metal Epoxy Composite (MEC) Materials Member


2018 -2020 Ongoing

19. The Kinetic of Zn-Al-Mg Coating Growth On Alloy Steel For Offshore Mooring And Crane Rope Facilities

Project Leader

RM 40,000.00 UTM Research University Grant (GUP – Tier 1)

2017 - 2019

Completed

20. Surface Cleaning and Ceramic Coating Process Using Gas Tunnel Type Plasma Spraying

Member


2017 - 2019

Completed

21. Low Temperature Synthesis of Graphene from Liquid Benzene by Chemical Vapour Deposition Method

Member


2017 - 2019

Ongoing

22. Thermal cyclic behaviours of lanthanum zirconate based double ceramic layer thermal barrier coating on Inconel 625 for gas turbine engine application

Member

RM 17,940.00 Nippon Sheet Glass (NSG) - International

2017 - 2019

Ongoing

23. Behaviour Of Intermetallic Compounds Formed Between Copper Interconnection Filler, Nickel Underlayer, And Silicon Wafer For Through-Silicon Via (Tsv) Application

Member


2018 - 2020

Ongoing

24. Thermodynamically and Kinetic Study of Solid-State Reaction in Yttrium Iron Garnet System

Project Leader


2016 - 2017

Completed

25. Yttrium Iron Garnet (YIG) as Magnetically Tunable Materials for Tunable Resonator

Project Leader

RM 7, 725.00 USM Postgraduate

Research Grant Scheme (PRGS)

2012 - 2015

Completed

2.2 CONSULTATION (C) Summary (C) Total Consultation 4 RM 106,182.00

No Project Level / year Project Value Status

1. Consultation on Heat-treatment of Ti6Al4V National

(2020) RM 1,640.00 Completed

2. Consultation on Fatigue and Crack Testing National

(2020) RM 3,750.00 Completed

3.

Program Peningkatan Kemahiran Guru dibawah Insentif Kewangan TWG-S DASAR INDUSTRY4WARD-Smart Materials Selection in Engineering Design (Invited speaker)

National (2019)

RM 71,500.00 Completed

4. WSPMA - Workshop on Sample Preparation Microstructural Analysis (organizer)

National (2017)


5. MPIT 2017 Symposium on Materials Processing Inspection & Testing (organizer)

National (2017)



6. 3RD WORKSHOP ON SAMPLE PREPARATION AND MICROSTRUCTURAL ANALYSIS (WPSMA2016)-(organizer)

National (2016)


2.3 RESEARCH PUBLICATION (RP)

Summary Publications

Book Full 1 Journal Index ISI 15 Chapter 0 Index SCOPUS 22 Non-Index / Others 22

Total 1 Total 59

2.3.1 Book/Chapter in a Book

No

Authors, year, title, publisher/journal/conference, volume and number of pages Level Remark

1

Zainal Arifin Ahmad, Meor Yusoff Meor Sulaiman, Mohd Ambar Yarmo, Fauziah Abd Aziz, Khairul Nizar Ismail, Norazharuddin Shah Abdullah, Yusof Abdullah, Wan Fahmin Faiz Wan Ali, Nik Akmar Rejab, and Abdul Rashid Jamaludin, Development and Investigation of Materials Using Modern Techniques, Trans Tech Publications, Switzerland, 2016. (ISI/SCOPUS Cited Publication) (ISBN-978-3-03835-537-3)

Int. Research

Book

2.3.2 Journal Article (Indexed Article)

No

Authors, year, title, publisher/journal/conference, volume and number of pages

Index. Year

1. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz

Wan Ali (2020) Linking Spectrograph to Mechanical and Physical Properties of X7475 Experimental Alloys Produced From Recycling Beverage Cans For Bumper Beam Applications, Materials Science Forum, vol 1010, pp. 52-57. https://doi.org/10.4028/www.scientific.net/MSF.1010.52

2. Norlin Nosbi, Haslan Fadli Ahmad Marzuki, Muhammad Razlan Zakaria, Wan Fahmin Faiz Wan Ali, Fatima Javed, Muhammad Ibrar, (2020) Structure Property Investigation of Glass-Carbon Prepreg Waste-Polymer Hybrid Composites Degradation in Water Condition, Processes, vol 8(11), pp. 2-13. https://www.mdpi.com/2227-9717/8/11/1434/htm

3. Nik Akmar Rejab, Nurul Khairunnisa Su, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad, Norazharuddin Shah Abdullah (2020) Structural Characteristic and Dielectric Properties of Zirconia Toughened Alumina, Materials Science Forum, vol 1010, pp. 250-255. https://www.scientific.net/MSF.1010.250

4. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali (2020) Fit Mix Effect Modelling of Physio-Mechanical Properties Of Experimental Al-Zn-Mg-Cu Alloy Stir-Cast From Recycled Beverage Can, IOP Conference Series: Materials Science And Engineering, Vol 884(1), pp. 012117- 012127 https://iopscience.iop.org/article/10.1088/1757-899X/884/1/012117/pdf

SCOPUS

ISI (Q2)

SCOPUS

SCOPUS

2020

2020

2020

2020

https://doi.org/10.4028/www.scientific.net/MSF.1010.52

https://www.mdpi.com/2227-9717/8/11/1434/htm

https://www.scientific.net/MSF.1010.250

https://iopscience.iop.org/article/10.1088/1757-899X/884/1/012117/pdf

https://iopscience.iop.org/article/10.1088/1757-899X/884/1/012117/pdf


5. Ahmad Amirul Ashraf Abdul Halim, Izman Sudin, Wan Fahmin Faiz Wan Ali, Roslin Yasak, Rozlina Md. Sirat, Mohamad Ariff Othman, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad (2020) Formation of Yttria Aluminium Garnet By Microwave Sintering, Materials Science Forum, vol 1010, pp 222-227, https://www.scientific.net/MSF.1010.222

6. Nurhaziqah Hasim, Nur Syuhada Azmi, Wan Fahmin Faiz Wan Ali, Esah Hamzah, Adibah Yahya, Muhammad Azizi Mat Yajid, Norlin Nosbi, (2020) Temperature Effect on Pseudomonas Aeruginosa Growth and Its Presence on Corrosion of Steel Wire Rope, Materials Science Forum, vol 1010, pp. 92-97. https://www.scientific.net/MSF.1010.92

7. Hamidreza Ghandvar, Wan Fahmin Faiz, Tuty Asma Abu Bakar, Mohd Hasbullah Idris (2020) The Simultaneous Effect of Extrusion Ratio And Solution Heat Treatment on the Microstructure and Tensile Properties of Extruded Al-15%Mg2si-1.0%Gd Composite, Materials Science Forum, vol 1010, pp 166-171 https://www.scientific.net/MSF.1010.166

8. Abubakar Kazeem, Amkpa Job Ajala, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Okorie Maduako Ammanuel, Effect of Annealing and Artificial Ageing Parameters on the Ultimate Tensile Strength and Elongation of New Al-(4-5) Zn-Mg-Mn-Cu Alloys Fabricated Using Recycled Beverage Cans International Journal of Integrated Engineering, vol 12(8) pp 130-140. https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/6045/3752

9. Abubakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz

Wan Ali, Effect of Heat Treatment on Modulus Hardening and Phase Transformation in Experimental 7xxx Stir-Cast Alloy from Recycled Beverage Cans, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.05.615

10. Teo Wei Na1, Fathin Asila Mohd Pabli, Syifa’ Muhamad Sharifuddin1, Mohd Shukri Mat Nor, Wan Fahmin Faiz Wan Ali, Muhammad Azwadi Sulaiman, Effect of Calcination Time on the Microstructure and Dielectric Properties of CaCu3Ti4O12 using

Enhanced Microwave Processing, Malaysian Journal of Microscopy, Vol 16(1). Pg. 81-93 https://malaysianjournalofmicroscopy.org/ojs/index.php/mjm/article/view/445

11. Khairul Fikri, Bin Tamrin and Muhammad Thalhah, Bin Zainal and Mohd Fairus, Bin Mohd Yasin and Wan Fahmin Faiz, Bin Wan Ali and Mohd Hanafi, Bin Ani (2020), Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi-empirical approach, Carbon Letters, 31 (1). pp. 1-10. https://doi.org/10.1007/s42823-020-00127-z

12. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Relating fractographic analysis to yield strength of novel x7475 (Al-Zn-Mg-Cu) alloys produced by recycling aluminium beverage cans, Materials Letter, 262, (2019) pg. 1-11, Q2 https://doi.org/10.1016/j.matlet.2019.127067

SCOPUS

SCOPUS

SCOPUS

SCOPUS

SCOPUS

SCOPUS

ISI (Q3)

ISI (Q2)

2020

2020

2020

2020

2020

2020

2020

2020




https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/6045/3752

https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/6045/3752

https://doi.org/10.1016/j.matpr.2020.05.615

https://malaysianjournalofmicroscopy.org/ojs/index.php/mjm/article/view/445

https://malaysianjournalofmicroscopy.org/ojs/index.php/mjm/article/view/445

https://doi.org/10.1007/s42823-020-00127-

https://doi.org/10.1016/j.matlet.2019.127067


13. Musfirah Mohhtar, Wan Fahmin Faiz Wan Ali, Joy Rizki Pangetsu Djuanshah, Influence of silica content on the stabilization of tetragonal zirconia for biomedical applications, AIP Conf. Proceed. Vol. 2068, (2019) pg. 0201101-0201106, https://doi.org/10.1063/1.5089409

14. Abubakar Kazeem, Amkpa Job Ajala, Mohammed H. Rady, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Correlating conductivity with hardness and density in x7475 alloys for development of linear hardness model, Universal Journal of Mechanical Engineering, 7(6C), (2019) pg. 15-21, https://10.13189/ujme.2019.071603

15. Abubakar Kazeem, Amkpa Job Ajala, Mohammed H. Rady, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Preliminary morpho-mechanical investigation of x7475 al-alloys produced from recycled beverage can, Universal Journal of Mechanical Engineering, 7(6C), (2019) pg 7-14, https:// 10.13189/ujme.2019.071602

16. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Effect of Isothermal Heat treatment on Hardness of X7475 Aluminium Alloys, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55(2), (2019) pg. 233-239. http://www.akademiabaru.com/doc/ARFMTSV55_N2_P233_239.pdf

17. Muhammad Faiz Ashri, Nik Akmal Rejab, Zainal Arifin Ahmad, Norazharuddin Shah Abdullah, Nur Azam BadarulZaman, Raja Azlan Amirul Raja Mat, Wan Fahmin Faiz Wan Ali, Densification and Grain Growth of Microwave-Sintered Yttrium Iron Garnet, AIP Conf. Proceed. Vol. 2068, pg. 0201071-0201078, (2019) https://doi.org/10.1063/1.5089406

18. Yap Tek Hong, Mohd Hasbullah Idris, Wan Fahmin Faiz Wan Ali, Mohammed Rafiq Abdul Kadir, Evaluation of as cast aluminium alloy tubes fabricated by using horizontal true centrifugal casting techniques, AIP Conf. Proceed. Vol. 2068 (2019), pg. 0201081-0201087, https://doi.org/10.1063/1.5089407

19. Hisyamuddin Hanif Ahmad, Nik Akmal Rejab, Zainal Arifin Ahmad, Mohd Fadzil Ain, Mohammadariff Othman, Wan Fahmin Faiz Wan Ali, Effect of Sm on YIG: Structural and Dielectric Properties Evaluation, AIP Conf. Proceed. Vol. 2068, (2019) pg. 0201121-0201126, https://doi.org/10.1063/1.5089411

20. Mohamadariff Othman, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad, Wan Amirul Wan Mohd Mahiyiddin, Yazeed Qasaymeh, Study on modified curve fitting model in analyzing YIG resonator antenna. Microwave and Optical Technology Letters. Vol 59 (12). (2018) pg. 1-6. DOI:10.1002/mop.31570

21. Wan Fahmin Faiz Wan Ali, Maslinda Kamarudin, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, Investigation of YIG’s Active Site Using Density Functional Theory, Materials Science Forum, Vol. 888 (2017), pg. 76-80. http://www.ttp.net/978-3-0357-1029-8/2.html

SCOPUS

SCOPUS

SCOPUS

SCOPUS

SCOPUS

SCOPUS

SCOPUS

ISI (Q4)

SCOPUS

2020

2019

2019

2019

2019

2019

2019

2019

2018

https://doi.org/10.1063/1.5089409

https://10.0.51.133/ujme.2019.071603

http://www.akademiabaru.com/doc/ARFMTSV55_N2_P233_239.pdf

http://www.akademiabaru.com/doc/ARFMTSV55_N2_P233_239.pdf

https://doi.org/10.1063/1.5089406

https://doi.org/10.1063/1.5089407

https://doi.org/10.1063/1.5089411

http://www.ttp.net/978-3-0357-1029-8/2.html


22. Rosyaini Afindi Zaman, Mohamad Johari Abu, Mohd Fariz Ab Rahman, Wan Fahmin Faiz Wan Ali, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Zainal Arifin Ahmad, Dielectric Properties of Al2O3/CaCu3Ti4O12 Composite at High Frequency Range, Materials Science Forum, Vol. 888 (2017), pg. 7-11, http://www.ttp.net/978-3-0357-1029-8/toc.html

23. Rosyaini Afindi Zaman, Wan Fahmin Faiz Wan Ali, Mohamad Johari Abu, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Zainal Arifin Ahmad, Role of mixing mediums in the synthesis of single phase CaCu3Ti4O12 (CCTO), Journal of Ceramic Processing Research, (2016), Vol. 17, Pg. 626-631, http://jcpr.kbs-lab.co.kr/file/JCPR_vol.17_2016/JCPR17-6/20.2015-220_626-631.pdf

24. Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, Maslinda Kamarudin, Mohd Fadzil Ain, Zainal Arifin Ahmad, Sintering and Grain Growth Control of High Dense YIG, Ceramic International, (2016), Pg. 1-20, http://dx.doi.org/10.1016/j.ceramint.2016.06.004

25. Nik Akmar Rejab, Zhwan Dilshad Ibrahim Sktani, Tan Yong Dar, Wan Fahmin Faiz Wan Ali, Abdul Rashid Jamaludin, Zainal Arifin Ahmad,The capability of hibonite elongated grains to influence physical, microstructural, and mechanical properties of zirconia toughened alumina–CeO2–MgO ceramics, International Journal of Refractory Metals and Hard Materials, (2016), Vol. 58, Pg 104–109, http://dx.doi.org/10.1016/j.ijrmhm.2016.04.008

26. Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, Mohd Fadzil Ain and Zainal Arifin Ahmad, Phase Evolution of Yttrium Iron Garnet (YIG) Made By Solid State Sintering: Particle Size Effect, Materials Science Forum, (2016), Pages 276-280, doi:10.4028/www.scientific.net/MSF.840.276

27. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, The Investigation of the Phenomenological YIG Phase Formation Within 1000°C to 1250°C: A Kinetic Approach, Journal of the American Ceramic Society, (2015), Pages 1-9 (doi: 10.1111/jace.13865).

28. Ubaid Ullah, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Nor Muzlifah Mahyuddin, Zainal Arifin Ahmad, Design of a Novel Dielectric Resonator Antenna using MgTiO3–CoTiO3 for Wideband Applications, Materials & Design, (2015) vol. 85, Pages 396-403 (doi:10.1016/j.matdes.2015.07.026)

29. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, From Optimization to Dielectric Resonator Antenna (DRA) Application of YIG: Synthesis Approach. Journal of Alloys and Compounds, (2015) Vol. 645, Pages 541–552 (doi:10.1016/j.jallcom.2015.05.092)

30. Wan Fahmin Faiz Wan Ali, Hasnul Hakimi Jaafar, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, Enhancement of YIG Bandwidth Efficiency through Ce-Doping for Dielectric Resonator Antenna (DRA) Applications, Journal of Materials Science: Materials in Electronics (2015) (DOI:10.1007/s10854-014-2428-7)

SCOPUS

ISI (Q4)

ISI (Q1)

ISI (Q1)

SCOPUS

ISI (Q1)

ISI (Q1)

ISI (Q1)

ISI (Q2)

2017

2017

2016

2016

2016

2016

2015

2015

2015

http://www.ttp.net/978-3-0357-1029-8/toc.html

http://jcpr.kbs-lab.co.kr/file/JCPR_vol.17_2016/JCPR17-6/20.2015-220_626-631.pdf



http://dx.doi.org/10.1016/j.ceramint.2016.06.004

http://dx.doi.org/10.1016/j.ijrmhm.2016.04.008


31. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, The Behavior of High Frequency Tunable Dielectric Resonator Antenna (DRA) with Addition of Excess Fe2O3 in Y3Fe5O12 (YIG) Formulation, Journal of Materials Science: Materials in Electronics, (2013), pg.1-13 (DOI 10.1007/s10854-013-1624-1)

32. Wan Fahmin Faiz Wan Ali, Hasnul Hakimi Jaafar, Mohamadariff Othman, Mohd Ihsan Zubir, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad. Structural Properties of Cerium Substituted Yttrium Iron Garnet. Advanced Materials Research, Vol. 187 (2015) pg. 157-161. doi:10.4028/www.scientific.net/AMR.1087.157

33. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Nik Akmar

Rejab, Mohd Zaid Abdullah, Arjuna Marzuki, Sabar Derita Hutagalung, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Synthesis and Characterization of Ba0.3Sr0.7ZrO3 Ceramic Thick Films Prepared By Sol-Gel Technique, Advanced Materials Research, Vol. 620 (2013) pg. 435-439.

34. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Nik Akmar Rejab, Mohd Zaid Abdullah, Arjuna Marzuki, Sabar Derita Hutagalung, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Synthesis and Characterization of Ba0.3Sr0.7ZrO3 Ceramic Thick Films Prepared By Sol-Gel Technique, Advanced Materials Research, Vol. 620 (2013) pg. 435-439. (doi:10.4028/www.scientific.net/AMR.620.435)

35. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, Studies on the Formation of Yttrium Iron Garnet (YIG) through Stoichiometry Modification Prepared by Conventional Solid-State Method, Journal of the European Ceramic Society, (2013), Vol. 33, pg. 1317-1324. (http://dx.doi.org/10.1016/j.jeurceramsoc.2012.12.016)

36. Wan Fahmin Faiz Wan Ali, Nik Akmar Rejab, Mohamadariff Othman, Mohd Fadzil Ain, Zainal Arifin Ahmad, An Investigation of Dielectric Resonator Antenna Produced from Silicon (100) Enhanced by Strontium Doped-Barium Zirconate Films. Journal of Sol-gel Science and Technology, (2012) Vol. 61, pg. 411-420. (DOI 10.1007/s10971-011-2641-2)

37. Nik Akmar Rejab, Mohamadariff Othman Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad, (Ba0.93Nd0.07)TiO3 Thin Films Prepared by Sol-Gel Method as a Potential Dielectric Resonator Antenna, Journal of Sol-gel Science and Technology, (2011) Vol. 57 pg. 172-177. (DOI 10.1007/s10971-010-2338-y

ISI (Q2)

SCOPUS

SCOPUS

SCOPUS

ISI (Q1)

ISI (Q2)

ISI (Q2)

2015

2015

2015

2013

2013

2012

2011

2.3.3 Journal Article (Non-Indexed Article)

No Authors, year, title, publisher/journal/conference, volume and

number of pages

Index. Year

1. Abu Bakar Kazeem, Nor Azam Badarulzaman, Wan Fahmin Faiz Wan Ali (2020), Optimization of Wear and Hardness of Al-Zn-Mg-Cu

EBSCO

2020

http://dx.doi.org/10.1016/j.jeurceramsoc.2012.12.016


Alloy Fabricated from Recycled Beverage Can using Response Surface Methodology, SN Applied Sciences, 2020 pp. 1-11

2. Mohamad Rizuan Mohamd Kamal, N.F. Bazilah, Augestine Luhat, Mohd Hasbullah Idris, Mohd Suhaimi Salleh, Wan Fahmin Faiz Wan Ali, Effect of semi-solid forming temperature and heat treatment on mechanical properties of Mg-Al-Zn Alloy (AZ91D) for automotive

application, Proceedings of Mechanical Engineering Research Day 2019, pp. 28-29, August 2019

3. Wan Fahmin Faiz Wan Ali*, Maslinda Kamarudin, Izman Sudin, Nik

Akmar Rejab, Mohd Fadzil Ain, Norazharuddin Shah Abdullah And Zainal Arifin Ahmad (2018) Structural Evolution of YIG during Microwave and Conventional Sintering at 1000 ºC, International Journal of Current Science, Engineering & Technology, 10.30967/ijcrset.1.S1.2018.435-440, pp 435-440

4. Chee Wayne Tan, Joy Rizki PANGESTU Djuansjah*, Mohd Hasbullah Idris, and Wan Fahmin Faiz Wan Ali (2018) Characterisation of Al65Cu20Fe15 Quasicrystal Alloy Synthesised via In-situ Casting under Standard Room Ambient and Argon Enriched Atmosphere, International Journal of Current Science, Engineering & Technology, DOI: 0.30967/ijcrset.1.S1.2018.280-286, pp. 280-286.

5. Musfirah Mokhtar, Wan Fahmin Faiz Wan Ali, Joy Rizki Pangetsu Djuanshah, Influence of Silica Content on the Stabilization of Tetragonal Zirconia for Biomedical Application, International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018

6. Qhairul Aidil Zizan, Raja Azlan Amirul Raja Mat, Hisyamuddin Hanif Ahmad, Ahmad Amirul Ashraf Abdul Halim, Mohammadariff Othman, Wan Fahmin Faiz Wan Ali, Dielectric Resonator Antenna (DRA) made of Yttrium Iron Garnet for 5G Applications, International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018, Malaysia

7. Yap Tek Hong, Mohd Hasbullah Idris, Wan Fahmin Faiz Wan Ali, Verification of in house design for horizontal true centrifugal casting machine via aluminium alloy casting, International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018, Malaysia

8. Mohamad Faizie Abdullah, Md Rozie Shafie, Muhammad Faiz Ashri, Wan Fahmin Faiz Wan Ali, The interaction between Zn-Al bath and wire rod with various cooling temperature; CFD Approach. International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018

9. Wan Fahmin Faiz Wan Ali, Nik Akmar Rejab, Norazharuddin Shah Abdullah and Zainal Arifin Ahmad. Effect of microwave and conventional heating and YIG formation mechanism at 1000oC. Advanced Materials Characterization Technique 2017 (AMCT’17) Awana Resort, Genting Highlands, 16-17 August 2017, Malaysia

Conf. Proceeding

E-Journal

E-Journal

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

2019

2018

2018

2019

2018

2018

2018

2017


10. Tan Chee Wayne, Joy Rizki Pangestu Djuanshah, Mohd Hasbullah Idris, Wan Fahmin Faiz Wan Ali. Characterisation of Al65Cu20Fe15 Quasicrystal Alloy Synthesized via In-situ Casting Under Standard Room Ambient and Argon Enriched Atmosphere in Advanced Materials Characterization Technique 2017 (AMCT’17) Awana Resort, Genting Highlands, 16-17 August 2017, Malaysia.

11. Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, And Zainal Arifin Ahmad, “Structural investigation of Y3Fe5-x(x.Y)O12 (X = 0.0, 0.3, 0.5, 1.0; Y = In3+ and Te3+) Synthesized From Conventional Solid State Routes, Proceedings of the International Conference on X-Rays and Related Techniques in Research and Industry 2016 (ICXRI2016) Dorsett Hotel, Putrajaya, 17--18 August 2016.

12. Mohamadariff Othman, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad and Mastaneh Mokayef, “Low Permittivity Dielectric Resonator Antenna (DRA) for Future 5G Applications, Proceeding of the 12th Malaysia International Conference on Communications (MICC) , IEEE-Antennas, Propagation and RF Design (MICC 2015), The Hilton Kuching, Sarawak, .23-25 November 2015

13. Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, Mohd Fadzil Ain, Zainal Arifin Ahmad, Particle Size Effect on the YIG Formation made by Solid State Sintering, Proceeding of the Seminar on Advanced Materials Characterization in Research, Industry and Nuclear Applications 2015 (AMCT 2015), Palace of the Golden Horses, Seri Kembangan, Kuala Lumpur, 9-10 June 2015.

14. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Ihsan Zubir, Hasnul Hakimi Ahmad, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad. Effect of the Addition CeO on the Structural, Microstructural, and Dielectric Properties Polycrystalline YIG. Proceedings of the International Conference on X-Rays and Related Techniques in Research and Industry 2014 (ICXRI2014) KSL Hotel, Johor Baru, 11-13 August 2014.

15. Mohamadariff Othman, Mohd Fadzil Ain, Ihsan Ahmad Zubir, Wan Fahmin Faiz Wan Ali, Zainal Arifin Ahmad, Study on the Effect of Dielectric Structure to the Cylindrical Dielectric Resonator Antenna (DRA). Proceedings of the 8th International Conference on Robotics, Vision, Signal Processing, and Power Applications (ROVISP 2013), Park Royal Hotel, Penang 10-12 Nov 2013

16. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, The Size Effect of Fe2O3 Reveals Particle-Phase Chemistry in the Formation of YIG Ceramics by Solid State Reaction. Proceedings of the 22nd Scientific Conference of the Microscopy Society Malaysia (MSM2013), Primula Beach Hotel, Kuala Terengganu, Terengganu, 26 –28 Nov. 2013

17. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain,

Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Effect of The Firing Properties on Formation of YIG Prepared Through Simple Processing Technique. Proceedings of the 21st Scientific Conference of the Microscopy Society Malaysia (MSM2012), Renaissance Hotel, Kota Bharu, Kelantan 22–24 Nov. 2012

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

Conf. Proceeding

2017

2016

2015

2015

2014

2013

2013

2012


18. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Nik Akmar Rejab, Mohd Zaid Abdullah, Arjuna Marzuki, Sabar Derita Hutagalung, Julie Juliewatty Mohamed, Mohd Fadzil Ain, 5Norazharuddin Shah Abdullah, Zainal Arifin Ahmad. Electrical properties of Ba0.3Sr0.7ZrO3 Thick Films Derived from Sol-gel Route at High Frequency Response (1MHz-1GHz). Proceedings of the International Conference on X-Rays and Related Techniques in Research and Industry 2012 (ICXRI2012) Vistana Hotel, Penang 3-5 July 2012.

19. Norazharuddin Shah Abdullah, Siti Kartini Enche Ab Rahim, Wan Fahmin Faiz Wan Ali, Getting to Know Plagiarism. Buletin Enjineur 2012, School of Materials and Mineral Resources Engineering, USM-Engineering Campus, 14300 Nibong Tebal, Penang

20. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Effect of The Firing Properties on Formation of YIG Prepared Through Simple Processing Technique. Proceedings of the 21st Scientific Conference of the Microscopy Society Malaysia (MSM2012), Renaissance Hotel, Kota Bharu, Kelantan 22–24 Nov. 2012

21. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, and Zainal Arifin Ahmad, Effect of Sintering Properties in the Formation of Yttrium Iron Garnet through Solid Phase Synthesis For Microwave Ferrite Resonator Antenna. Proceedings of Nuclear Science, Technology and Engineering Conference 2012 (NUSTEC2012), TNB Research, Kajang, Selangor 21-23 May 2012

22. Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain and Zainal Arifin Ahmad, Effect of Sintering Properties in The Formation of Yttrium Iron Garnet Through Solid Phase Synthesis For Microwave Ferrite Resonator Antenna, Journal of Nuclear Science and Related Technologies, (2012) Vol. 9, No. 2, pg. 47-55. (JNRT2012-9-2-07.pdf)

Conf. Proceeding

Bulletin

Conf. Proceeding

Conf. Proceeding

E-Journal

2012

2012

2012

2012

2012

3.0. ACADEMIC RECOGNITION AND LEADERSHIP, SERVICE TO THE UNIVERSITY AND SERVICE TO THE COMMUNITY (ACS)

Summary (ACS) International National Community service Total ACS 58 18 33 7

3.1 International Recognition

No Academic Recognition Year Awarding Body / Name of Institution

1. Reviewer

2. Reviewer

3. Reviewer

4. Committee Member /

Reviewer

5. Referred Journal

Reviewer

6. Secretariat member /

Reviewer / Jury

7. Reviewer

8. Secretariat member

2019

2019

2019

2019

2016

2018

2012,

2018

2018

Journal of Mechanical Engineering and Sciences (JMES)

Diamond and related materials (Elsevier)

International Journal Structural Integrity (IJSI)

3rd International Seminar on Advances in Materials Science

and Engineering (ISAMSE 2018)

International Journal of Electromagnetic Technology (IJET

2016-2018)

International Conference on X-ray and Related Techniques in

Industry (ICXRI2012, 2018)

4th International Conference on Science in Information

Technology (ICSITECH2018)


9. Reviewer

10. Reviewer

11. Reviewer

12. Reviewer

13. Invited Speaker

14. Reviewer

15. Reviewer

16. Reviewer

17. Reviewer

18. Committee member

2018

2015,

2017

2017

2017

2017

2017

2016

2016

2016

2016

2015,

2016

2013

Advanced Materials Characterization Techniques

(AMCT2015,2017)

Malaysia Technical Scientist Association (MALTESAS)

Facta Universitatis, Series: Mechanical Engineering

International Conference on Telecommunication, Electronic

and Computer Engineering (ICTEC 2017)

9th International Conference on Computational Intelligence

and Communication Networks (CICN 2017)

XRD workshop on Qualitative and Quantitative Analysis using

X’Pert HighScore (USM)

6th International Graduate Conference on Engineering,

Science and Humanity (IGCESH'2016)

International Conference on Education (ICOED'2016)

International Conference on Computer and Communication

Engineering (ICOCOE'2016)

Advanced Research in Material Sciences, Manufacturing,

Mechanical and Mechatronic Engineering Technology

International Conference (AR4MET'2015-16)

Asian International Conference on Materials, Minerals, and

Polymers (MAMIP2012)

3.1 National or University Recognition

No Recognition Position Duration Level

1. Internal Examiner Viva Voce (Master by Research-Siti

Aishah)-UTM

2. Reviewer Geran Penyelidikan University (GUPTier 2)

3. Reviewer for Geran Penyelidikan Universiti (UTMER)

4. Speaker-Program peningkatan kemahiran guru

dibawah insentif kewangan twg-s dasar

industry4ward-smart materials selection in engineering

design

5. Reviewer for Geran Penyelidikan Universiti (UTMFR)

6. Secretary of Institute Materials Malaysia (IMM)

Southern Chapter

7. External Examiner of Polytechnic Ibrahim Sultan for

Diploma Mechanical Engineering (Materials)

8. Technical Committee in Symposium on Damage

Mechanisms in Materials and Structures 2018

(SDMMS 2018)

9. Task Force MYRA Research Group (MRCG),


10. Task Force Semakan Course File for Engineering

Accreditation Council (EAC) Faculty of Mechanical

Engineering, Universiti Teknologi Malaysia (UTM)

11. Assistance Chairman for PhD viva (Intan Syaqirah

Binti Mohd Zulkifli) Faculty of Mechanical Engineering,


12. Coordinator for Non-destructive testing (SKMB 4603)

course, Faculty of Mechanical Engineering, Universiti

Teknologi Malaysia (UTM)

Extenal

Examiner

Reviewer

Reviewer

Invited

speaker

Reviewer

Secretary

External

examiner

Technical

Committee

RG Rep.

Dept. Rep

Asst.

Chairman

Course

coordinator

2020

2019

2019

2019

2019

2018-

2020

2018-

2020

2018

2018

2018

2018

2018

University

University

University

National-

KPM

University

National-

IMM

National-

Poly

National

University

University

University

University


13. Advisor Institute Materials Malaysia Student Chapter

(IMM-UTM) Universiti Teknologi Malaysia (UTM)

14. Coordinator for Metal Foundry Laboratory Faculty of

Mechanical Engineering, Universiti Teknologi Malaysia

(UTM)

15. Secretary in 1-Day Symposium on Materials

Processing Inspection and Testing, Faculty of


(UTM)

16. Coordinator for Materials Science (SKMM 2613)

course, Faculty of Mechanical Engineering, Universiti


17. Hari Inovasi Ke-5 Fakulti Pendidikan, Universiti


18. Industrial training supervisor, Faculty of Mechanical


19. Secretary in 3rd Workshop on Sample Preparation

and microstructural analysis

20. Member in Materials Research Consultancy Group of

Frontier Materials

21. Secretariat Member in MoU Signing Ceremony

between UTM – IMM at Faculty of Mechanical


22. Coordinator for Final year project (Mechanical-

Materials) Faculty of Mechanical Engineering,


23. Committee member (Task Force for Interim Audit

(Engineering Accreditation Council, EAC) for

Mechanical-Materials Program

24. Internal Examiner for Master (Mix mode) Presentation

at Faculty of Mechanical Engineering, Universiti


25. Internal Examiner Final Year Project at Faculty of


(UTM)

26. Laboratory Demonstrator for 1st Year Student on

Phase Identification using Hanawalt, Fink and

Alphabetical Method (X-ray Diffraction Laboratory),


Engineering-USM (2015)

27. Sudoku Competition (Piala Professor Dr. Hj. Zainal

Arifin Hj. Ahmad), at School of Materials & Mineral

Resources Engineering, USM-Engineering Campus,

Penang

28. KPI Committee Member in School of Materials &

Mineral Resources Engineering, USM-Engineering

Campus, Penang.

29. Demonstrator for a group student from MRSM

Transkrian’s assisting them in samples preparation for

Tunas Saintis Exhibition. Penang.

30. Laboratory Assistance for Mara Junior Science

College Transkrian’s student-Assisting them for Pesta

Type III Competition on “Rice husk-rubber composite

Advisor

Lab

Coordinator

Secretary

Course

coordinator

Jury

Internship

Supervisor

Secretary

Secretary

Secretariat

member

Coordinator

Committee

Member

Internal

Examiner

Internal

Examiner

Lab.

Assistance

Project

Manager

Committee

member

Demonstrator

Demonstrator

2017-

2021

2017 –

2019

2017

2017

2017

2017-

2019

2017

2016 –

current

2016

2016-

2020

2016

2016

2016 –

current

2015

2014 -

2015

2011 -

2014

2013-

2015

2014

University

University

University

University

University

University

University

University

University

University

University

University

University

University

University

University

University

University


for microwave absorber” (Physical Laboratory) -


Engineering-USM.

31. Industrial Training Poster Judge at School of Materials

and Mineral Resources Engineering-USM

32. Laboratory Demonstrator for 3rd Year Student on

Microstructure and Hardness Testing (Metallography

Laboratory), School of Materials and Mineral

Resources Engineering-USM

33. Tutor for 1st Year Student on Materials Engineering

subject at School of Materials and Mineral Resources

Engineering-USM

Jury

Demonstrator

Tutor

2014

2013

2012

2012

University

University

University

3.1 Community Service

No Level Activity Role Year

1 National Young Engineers Talent Program at Sekolah

Teknik Johor Bahru Organizer /

Speaker 2019

2 National Program Peningkatan Kemahiran Guru

Industry4ward (KPM) Facilitator /

Speaker 2019

3 National Community Service at Rumah Kebajikan Anak

Yatim Islam, Kota Tinggi, Johor. Organizer 2017

4 National Participate in I-Bantu Penang in assisting

Kelantan and Perak’s flood victim Volunteer 2015

5 National Committee Member in organizing “Workshop on

Chili Planting through Fertigation Method” Organizer 2011

6 National

Involved in a investigation of “Possible solutions for the poultry issues amongst Nibong Tebal residents, Mini Project,

Presenter 2010

7 National USM Engineering volunteers in assisting Batu

Pahat’s flood victims under USM Engineering Campus Brigade

Volunteer 2007

4.0. OTHERS

4.1. Skills

No. Software Level

1 Microsoft Office (Words, Excel, PPT) Advanced User

2 Computer Simulation Technology Suite Studio (Microwave / Antenna Simulation)

Intermediate User

3 Sigma Plot, Origin Pro Advanced User

4 X’Pert HighScore Plus, EVA for XRD Analyses Advanced User

5 Design Expert, Minitab for statistical design Advanced User 6 Materials Studio Accelrys-CASTEP, FORCITE – Phonon Intermediate User 7 Sketchup Pro. Intermediate User

8 AnyCASTING, ProCast Intermediate User

9 CAD/CAM (Solid Work, Ansys) Intermediate User


4.2. Language

No Language Level

1 Bahasa Melayu (Malay

Language) Speaking/Writing/Reading

2

English Language

Speaking/Writing/Reading

5.0. APPENDIX

5.1 UNDERGRADUATE SUPERVISION

No Name of student Mode / Project title Year Status

1

Abdul Nasir Hairuman (main supervisor)

An investigation on the temperature effects on reaction kinetics of high carbon steel in molten zn-al-mg system made by hot-dip galvanizing

2019 Graduated

2

Mohd Afiqh Hidayat Mohd Rahimi (main supervisor)

An investigation on reaction kinetics of intermetallic reaction layers (irl) on high carbon steel at various amount of mg in zny-al(5-x)-mgx (zam) molten bath

2019 Graduated

3 Mohd Hedir Abdul

Rashid (main supervisor)

Modelling and prediction of fretting wear of steel wire rope at various helix angle

2019 Graduated

4 Nik Aina Shafika Nik

Azmi (main supervisor)

simulation on fatigue behaviour of steel wire at various diameters 2019 Graduated

5

Nur Najwa Osman (main supervisor)

G number effect on mechanical and microstructural properties of aluminium alloys (lm6) hollow tube made by centrifugal casting method

2019 Graduated

6

Syaizarul Syahmi Mohd Nazri (main supervisor)

Simulation on wear performance of zirconia toughened alumina (zta) cutting insert: from low to high-speed turning

2019 Graduated

7

Nor Najwa Izzati Inche Ali (main supervisor)

simulation of shrinkage defect formation of aluminium alloy (lm6) made by centrifugal casting method; effect of pouring temperature and rotational speed

2019 Graduated

8

Norhaziqah Hasim (main supervisor)

effect of temperature on growth of pseudomonas aeruginosa and its corrosion effect on steel wire rope

2019 Graduated

9

Nur Syuahada Azmi (main supervisor)

ph effect microbial corrosion of high carbon steel induced by pseudomonas aeruginosa sp.

2019 Graduated

10

Mohd Ihsan Shukri (main supervisor)

Wear performance and mechanical properties of zta cutting tool insert with various turning speed

2019 Graduated

11 Ahmad Amirul Ashraf

B Abdul Halim (main supervisor)

Phase formation and sintering of YAG by microwave sintering 2017 Graduated


12

Mohamad Faizie B Abdullah (main supervisor)

Design and development of a small scale hot-dip galvanizing system for wire-rope applications

2017 Graduated

13

Hisyamuddin Hanif B Ahmad (main supervisor)

Structural investigation of rare earth (ra) doped yttrium iron garnet (YIG) made by solid state reaction

2017 Graduated

14

Md Rozie B Shafie (main supervisor)

The effect of nbo on the physical microstructure and mechanical properties of YSZ toughened alumina

2017 Graduated

15

Qhairul Aidiil B Zizan (main supervisor)

Yttrium iron garnet (YIG) doped Sm for high frequency design of dielectric resonator antenna (DRA) application

2017 Graduated

16

Raja Azlan Amirul B Raja Mat (main supervisor)

Structural investigation of praseodymium (Pr) doped yttrium aluminium garnet (YAG) made by solid state reaction

2017 Graduated

17

Muhammad Faiz B Ashri (main supervisor)

Sintering and grain growth control of YIG by microwave sintering 2017 Graduated

5.2 POSTGRADUATE SUPERVISION

No

Name of student Mode / Project title Year Status

1 Mutaz Hatim Taher

(UTM-Co-Supervisor) MSc Taught course –

2019 Graduated

HAFIZ

Azuwa

2 Abu Bakar Kazeem

(UTHM- Co-Supervisor - UT)

PhD Research Mode - Recycle aluminium for drone applications. 2018 Graduated

3

Mohamad Ridzuan Mohamad Kamal (UTM - Co-Supervisor)

PhD Research Mode - Semi Solid Processing of AZ91D Magnesium Alloy by Advanced Simulation and Thixoforming Techniques

2018 On-going

4

Musfirah Binti Mokhtar (UTM - Main-Supervisor)

MSc Research Mode - Investigation of the structural and mechanical properties of zirconia in the presence of silica for biomedical applications

2018 On-going

5

Ikhwan Hafiz Hassan (UTM - Co-Supervisor)

MSc Taught course – The effect of alloy layer on the corrosion resistance of galvanized steel wire rod for offshore mooring and crane rope applications

2017 Graduated

6 Mohd Hanif Naif

(UTM - Co-Supervisor) MSc Taught course - Stabilization of Zn-Al-Mg Coating for Mass Production

2017 Graduated

7

Siti Suhailah Binti Khairullah (UTM - Co-Supervisor)

MSc Taught course – Effect of heat treatment to microstructure and mechanical properties of Al-Cu-Fe quasi crystal alloys

2016 Graduated

CURRICULUM VITEA (WFFWA)

Documents