CURRICULUM VITAE Areas of Specialization: Manufacturing Systems, FMS, CIMS, Simulation Education: Qualifications Discipline/Specialization Institution/University Year of Passing Division High School Science ICSE, St. Thomas Boy’s School, Khidderpore, Kolkata 1985 Intermediate Science Aligarh Muslim University 1987 1 st Division (Hons.) Bsc. Engg. Mechanical Engineering Aligarh Muslim University 1991 1 st Division Msc. Engg. Mechanical Engg./Industrial Engg. Aligarh Muslim University 1995 1 st Division Ph.D. Mechanical Engg./Industrial Engg. Topic: A Study of Flexible Manufacturing System in CIMS Context Supervisor: Prof. S. Wadhwa and Prof. P. V. Rao Department of Mechanical Engineering, IIT-Delhi 2007 Teaching Experience: Duration Designation Department/Section 16.11.2010- Till date Professor Department of Mechanical Engg., ZHCET, Faculty of Engg. & Tech., A.M.U., Aligarh 12.11.2007- 15.11.2010 Associate Professor Department of Mechanical Engg., ZHCET, Faculty of Engg. & Tech., A.M.U., Aligarh 12.11.2004- 11.11.2007 Reader (Associate Professor) Deptt. of Mech, Engg. & Mech. Engg. Section, Uni.Poly. Faculty of Engg. & Tech., A.M.U., Aligarh 12.11.1999- 11.11.2004 Sr. Lecturer (Assistant Professor) Mech. Engg. Section, Uni. Poly., Faculty of Engg. & Tech. A.M.U., Aligarh 12.11.1994 - 11.11.1999 Lecturer (Assistant Professor) Mech. Engg. Section, Uni. Poly., Faculty of Engg. & Tech. A.M.U., Aligarh Curriculum Development: Designed Syllabus for: ME214 Manufacturing Technology-I ME325 Manufacturing Technology-II ME341 Industrial Engineering ME391 Manufacturing Engineering Lab. II ME497 Manufacturing Technology Lab. III ME655 Flexible Manufacturing System ME653 Computer Integrated Manufacturing System ME811I Computer Integrated Manufacturing System ME826I Automated Manufacturing System MOHAMMED ALI, Ph.D. Professor Department of Mechanical Engineering Aligarh Muslim University, Aligarh-202002, UP, India [email protected], [email protected]Mobile No: +91 7599396152
12
Embed
CURRICULUM – VITAE · CURRICULUM VITAE Areas of Specialization: Manufacturing Systems, FMS, ... Shahnawaz Khan, Aadil Mobin 2010 Developing a …
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CURRICULUM VITAE
Areas of Specialization: Manufacturing Systems, FMS, CIMS, Simulation
Education:
Qualifications Discipline/Specialization Institution/University Year of Passing
Division
High School Science ICSE, St. Thomas Boy’s School, Khidderpore, Kolkata
1985
Intermediate Science Aligarh Muslim University 1987 1st
Division (Hons.)
Bsc. Engg. Mechanical Engineering Aligarh Muslim University 1991 1st
Division
Msc. Engg. Mechanical Engg./Industrial Engg. Aligarh Muslim University 1995 1st
Division
Ph.D. Mechanical Engg./Industrial Engg. Topic: A Study of Flexible Manufacturing System in CIMS Context Supervisor: Prof. S. Wadhwa and Prof. P. V. Rao
Department of Mechanical Engineering, IIT-Delhi
2007
Teaching Experience:
Duration Designation Department/Section
16.11.2010- Till date
Professor Department of Mechanical Engg., ZHCET, Faculty of Engg. & Tech., A.M.U., Aligarh
12.11.2007- 15.11.2010
Associate Professor Department of Mechanical Engg., ZHCET, Faculty of Engg. & Tech., A.M.U., Aligarh
12.11.2004-11.11.2007
Reader (Associate Professor)
Deptt. of Mech, Engg. & Mech. Engg. Section, Uni.Poly. Faculty of Engg. & Tech., A.M.U., Aligarh
MOHAMMED ALI, Ph.D. Professor Department of Mechanical Engineering Aligarh Muslim University, Aligarh-202002, UP, India [email protected], [email protected] Mobile No: +91 7599396152
Member for Industry Institution Interaction team for Z. H. C. E. T from Mechanical Engg. Department.
Student Advisor (B.Tech. & M.Tech.).
Member of Moderation Committee for Moderation of paper for B.Tech. (Mech. Engg.) papers.
External Member of Moderation Committee Mechanical Engg. Section, Uni. Poly. A.M.U., Aligarh.
Member of the Organizing committee of 2nd
National Conference on Advances in Heat Transfer and Fluid Dynamics, Department of Mechanical Engineering , A.M.U., Aligarh, 23-24, March, 2013.
Scrutinizer/Verifying Officer for completion of admission to M. Tech. (Mech.) 2014-15, 2013-14, 2012-13, 2011-12.
Observer for conducting MBBS/BDS Admission Test at Kolkata Center 2014-15.
Observer for conducting MBBS/BDS Admission Test at Lucknow Center 2012-13, 2011-12,.
Incharge, Time Table, B. Tech., B.E. M.Tech. (Mechanical Engineering).
Tabulator, 1st
Year B.Tech (all branches) 2010-11.
Member of Organizing committee of All India Seminar on Ergonomics for Improved Productivity held at Ergonomics Research Division, Department of Mechanical Engineering, Z.H.C.E.T, A.M.U., Aligarh, 21-22, November, 2009.
Physical Stock Verifying Officer for (AC/Ref. Lab. Workshop Store).
Member of the R&D, ICT and Accreditation Activities Cell.
Member of the NBA committee to finalize the modalities of Accreditation of the Department.
Member of anti ragging team.
Member of Seminar Library Committee.
Scrutinizer of Answer copies (Department of Mechanical Engg.).
Assistant Project Officer (APO) in the Community Polytechnic Scheme.
Performed Election duties to conduct election to AMU student’s union and AMU court.
Incharge, (TPEC/CFC) schemes.
Verifying Officer (TPEC/CFC) schemes.
Assistant Superintendent (Examination), University Polytechnic, A.M.U., Aligarh. Patent:
Mohammed Ali, Rafid Suhail, Aslam Adil and Mohammad Irfan (Published) “FLEXIBLE HEADLIGHTS FOR FOUR WHEELERS” patent Application No.2612/DEL/2011 has been published on 21.10.2011 in the Official Journal of the Patent. New Delhi, Issue No.42/2011, pp.18030, 2011.
Mohammed Ali, Shivang Verma, Yamini Agarwal, Vidhusi Singh (Published) “SELF RETRIEVING SIDE STAND SYSTEM FOR TWO WHEELERS” patent Application No. 2188/DEL/2012 has been published on 24.08.2012 in the Official Journal of the Patent, New Delhi, Issue No. 34/2012, pp. 12079, 2012.
Award received:
Distinguished Scientist Award received from Venus International Foundation, Chennai, 2016.
Received President Medal from St. Thomas Boys School, Khidderpore, Kolkata, 1985.
Computer Literacy:
ARENA Simulation Software (Version-11)
MS-Office
AHP/ANP
Academic Reviewer:
International Journal of Production Research
Global Journal of Flexible Systems Management
Journal of Industrial Engineering and Management
International Journal of Human Factors and Ergonomics
International Journal of Productivity and Quality Management
International Journal of Industrial and System Engineering
Memberships of Professional Bodies:
Member of Indian Society of Ergonomics, India (L-441)
Publications: International Journals (18):
1. Mohammed Ali, Mohd. Murshid, (2016) “Performance Evaluation of Flexible Manufacturing System Under Different Material Handling Strategies” Global Journal of Flexible Systems Management (Springer), Vol. 17, No. 3, pp.287-305, First Online: 21 March 2016.
2. Wasif Ullah Khan, Mohammed Ali, (2015) “Effect of Sequencing Flexibility on the Performance of Flexibility Enabled Manufacturing System” International Journal of Industrial and System Engineering, Vol. 21, No. 4, pp. 474-498.
3. Mohammed Ali, Zameer Ahmad, (2014) “A Simulation Study of FMS under Routing and Part Mix flexibility” Global Journal of Flexible Systems Management (Springer), Vol. 15, No. 4, pp. 277-294, December (ISSN: 0972-2696).
4. Ajay Singholi, Mohammed Ali, Chitra Sharma (2013) “Evaluating the effect of Machine and Routing Flexibility on Flexible Manufacturing System Performance” International Journal of Services and Operations Management (InderScience), Vol. 16, No. 2, pp. 240-261 (ISSN: 1744-2389).
5. Mohammed Ali (2012) “Impact of Routing and Pallet Flexibility on Flexible Manufacturing System” Global Journal of Flexible Systems Management (Springer), Vol. 13, No.3, pp. 141-149 (ISSN: 0972-2696).
6. Ajay Singholi, Mohammed Ali, Chitra Sharma (2012) “Impact of Manufacturing Flexibility on FMS Performance: A Simulation Study” International Journal of Industrial and System Engineering (InderSciece), Vol. 10, No. 1, pp. 96-116 (ISSN: 1748-5037)
7. Mohammed Ali, Mohd. Shaifi (2011) “A Decision Support System for Flexibility Enabled Discrete Part Manufacturing System” Global Journal of Flexible System Management (Springer), Vol. 12, No. 3& 4, pp. 1-8, July-December (ISSN: 0972-2696).
8. Mohammed Ali, Subhash Wadhwa, (2010) “The Effect of Routing Flexibility on a Flexible System of Integrated Manufacturing” International Journal of Production Research (Taylor & Francis), Vol.48, No.19, , pp. 5691-5709, 1 October (ISSN: 1366-588X, Impact Factor=1.460).
9. Mohammed Ali, Salahuddin, M. A. Khan, (2010) “Analysis of the Impact of Routing Flexibility on the Performance of Flexible System” International Journal of Industrial Engineering: Theory, Applications and Practice, Vol.17, No.4, pp.269-278 (ISSN: 1072-4761).
10. Mohammed Ali, Wasif Ullah Khan (2010) “Implementation Issues of AGVs in Flexible Manufacturing System: A Review” Global Journal of Flexible System Management, Vol. 11, No.1/2, pp. 55-61 (January-June) (ISSN: 0972-2696).
11. Syed Imran Shafiq, Mohd. Faheem, Mohammed Ali, (2010) “Effect of Scheduling and Manufacturing Flexibility on the Performance of FMS” Global Journal of Flexible System Management, Vol. 11, No.3, pp. 21-38 (July-September) (ISSN: 0972-2696).
12. Subhash Wadhwa, Ajay Singholi, Mohammed Ali, (2010) “Evaluating the Effect of Part-mix and Routing Flexibility on FMS Performance” Global Journal of Flexible System Management, Vol. 11, No. 4 pp. 17-24 (October-December) (ISSN: 0972-2696)..
13. Durgesh Sharma, Mohammad Ali, (2010) “Framework for Implementing Flexible Automation in Indian Industries” Global Business and Management Research: An International Journal, Vol. 2, No. 2 & 3 pp. 208-223.
14. Ajay Singholi, Mohammed Ali, Deepti Chhabra (2010) "Towards Improving the Performance of Flexible Manufacturing System: A Case Study" Journal of Industrial Engineering and Management, Vol. 3, No. 1, pp. 87-115. (ISSN: 2013-0953).
15. Durgesh Sharma, Ajay Singholi, Mohammad Ali, Chitra Sharma (2010) “Feedback Based Framework for Flexibility Management & Control” VIVECHAN, International Journal for Research, Vol.1, pp.26-39.
16. Subhash Wadhwa, Y. Ducq, Mohammed Ali, Anuj Prakash, (2009) “Performance Analysis of a Flexible Manufacturing System” Global Journal of Flexible System Management, Vol. 10, No.3, pp. 23-34 ( July-September) (ISSN: 0972-2696).
17. Subhash Wadhwa, Y. Ducq, Mohammed Ali, Anuj Prakash, (2008) “Performance Analysis of a Flexible Manufacturing System under Planning and Control Strategies” Studies in Informatics and Control Journal, Vol. 17, No. 3, pp. 273-284, September (ISSN: 1220-1766).
18. Mohammed Ali, Subhash Wadhwa, (2005) “Performance Analysis of Partial Flexible Manufacturing System” Global Journal of Flexible System Management, Vol. 6, No.1, pp. 9-19 (January-March) (ISSN: 0972-2696).
National Journals (8):
1. Wasif Ullah Khan Mohammed Ali, (2017) “Effect of Routing Flexibility on System Performance in Stochastic Environment” Global Sci-tech, Al-Falah’s Journal of Science & Technology, Vol. 09, No.2, pp. 79-85 (April-June) (ISSN: 0975-9638).
2. Salman Mohd. Khan, Mohammed Ali (2016) “To Design and Manufacture Complex Shapes through CAD/CAM Integration on CNC Lathe Machine” Journal of Material Science and Mechanical Engineering, Vol. 3 Issue 6, pp.390-394.
3. Nooruddin Ansari, Mohammed Ali (2016) “Optimization of Machining Parameters during CNC Turning on Surface Roughness by using Response Surface Methodology” Journal of Material Science and Mechanical Engineering, Vol. 3 Issue 6, pp.443-448.
4. Mohammed Ali, (2013) “Information Based Decision and Control in Flexible Manufacturing Systems” Industrial Engineering Journal, Vol. 6, No. 6, pp. 12-19. (ISSN: 0970-2555).
5. Mohammed Ali, (2010) “Performance of Flexible System under Alternative Control Strategies” Journal of Technology, Operations and Management, Vol. 01, No. 01, pp. 75-87. (ISSN: 0970-8091).
6. Mohammed Ali, (2009) “The Development of Discrete Event Simulation Model for Scenario Analysis” Journal of the Institution of Engineers (India), Vol. 89, pp. 36-40, (ISSN: 0257-6708).
7. Mohammed Ali, M. Kumar (2008) “An Analytical Hierarchy Process (AHP) Framework for Selecting Flexible Manufacturing System” Management Dynamics, Vol. 8, No. 1, pp. 57-70. (ISSN: 0972-5067).
8. F. Talib, Mohammed Ali, (2003) “Impact of Quality Circle–A Case Study” Journal of the Institution of Engineers (India), Vol. 84, pp-10-13. (ISSN: 0970-9843).
International Conferences (22): 9. Mohammed Ali, (2016) “Performance Evaluation of FMS with Dedicated machine Buffers” Published in the Proceedings
of IVth
International Conference on Production & Industrial Engineering, 19-21 December, Department of Production & Industrial Engineering, NIT-Jalandhar, Punjab.
10. Wasif Ullah Khan, Mohammed Ali, (2016) “To Study the Performance of FMS with AGVs in Stochastic Environment” Published in the Proceedings of IV
th International Conference on Production & Industrial Engineering, 19-21 December,
Department of Production & Industrial Engineering, NIT-Jalandhar, Punjab. 11. Mohd. Shabaan Hussain, Mohammed Ali, (2016) “Heterarchical Flexible manufacturing Systems: Controal and
Performance Perspectives” Published in the Proceedings of IVth
International Conference on Production & Industrial Engineering, 19-21 December, Department of Production & Industrial Engineering, NIT-Jalandhar, Punjab.
12. Shahnawaz Mohsin, Imtiyaz Ali Khan, Mohammed Ali, (2016) “Ergonomic Evaluation of a CNC Milling Environment Using Energy Expenditure Prediction Program” Published in the Proceedings of IV
th International Conference on Production &
Industrial Engineering, 8-11 December, Department of Production & Industrial Engineering, NIT-Jalandhar, Punjab. 13. Amrik Singh, Jagtar Singh, Mohammad Ali, (2016) “ Towards Performance of Flexible Manufacturing Systems (FMS) in
context of Manufacturing Flexibilities, Published in the Proceedings of 6th
International & 27th
All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016 at College of Engineering., Pune, Maharashtra.
14. Mohd. Murshid, Sanyam Sharma, Mohammed Ali, (2014) “Performance Analysis of Flexible Manufacturing System by ANOVA” Published in the Proceedings of 1
st International Conference on Mechanical Engineering: Emerging Trends for
Sustainability, pp. 764-772, 29-31, January, Department of Mechanical Engineering, Maulana Azad National Institute of Technology, Bhopal, MP.
15. Mohammed Ali, (2013) “Discrete Event Simulation: An Effective Tool to Evaluate Flexibility in Manufacturing Systems” Published in the Proceedings of the Thirteenth Global Conference on Flexible Systems Management, pp. 632-645, 13-15, December, IIT-Delhi.
16. Irfan Haider, Mohammed Ali, Rafid Suhail (2013) “Effect of AGV Fleet Size and Manufacturing Flexibility on the Performance of FMS” Published in the Proceedings of the Thirteenth Global Conference on Flexible Systems Management, pp. 666-679, 13-15, December, IIT-Delhi.
17. Mohd. Shabaan Hussain, Mohammed Ali, (2013) “Flexibility Enabled Makespan Reduction of a Discrete Part manufacturing system: A Simulation Study” Published in the Proceedings of the Thirteenth Global Conference on Flexible Systems Management, pp. 680-688, 13-15, December, IIT-Delhi.
18. Mohd. Murshid, Mohammed Ali, Mohd. Zeeshan (2013) “Impact of Loading and Unloading Strategy on Performance of Flexible Manufacturing System at various level of Routing Flexibility, Published in the Proceedings of International Conference on Automation and Mechanical Systems, pp. 337-348, 21-22, March, Lingaya’s University, Faridabad, India (ISBN: 978-81-909732-9-8).
19. Mohammed Ali (2012) “A Makespan Performance Evaluation of Flexibility Based Integrated Manufacturing System” Published in the Proceedings of International Conference on Agile Manufacturing, pp. 226-231, 16-19 December, IIT-BHU, Varanasi, India (ISBN: 978-93-5087-8668).
20. Syed Imran Shafiq, Mohammed Ali, (2010) “Simulation: An Effective Tool for Performance Evaluation of Discrete Part Manufacturing System” Published in the Proceedings of the 11th Asia Pacific Industrial Engineering and Management Systems Conference, 7-10, December, Melaka - Malaysia, (ISBN: 978-967-5148-80-4).
21. Ajay Singholi, Mohammed Ali, D. Chhabra, C. Sharma “(2010) “Impact of Flexibility on FMS Performance: A Simulation Study” Published in the Proceedings of International Conference on Frontiers in Mechanical Engineering, pp.22-28, 20-22, May, held at National Institute of Technology, Surathkal, Mangalore, India.
22. Ajay Singholi, Mohammed Ali, Chitra Sharma (2010) “Modeling of Process and Routing Flexibility in Flexible Manufacturing Systems” Published in the Proceedings of 2nd International Conference on Production and Industrial Engineering, pp. 1-5, 3-5, December, National Institute of Technology, Jalandhar, India.
23. Mohammed Ali, (2009) “Performance of Flexibility Enabled Manufacturing System under Control Strategies” Published in the Proceeding of Ninth Global Conference on Flexible Systems Management, 12–14, November, Mumbai, India (ISBN: 978-81-906294-6-1).
24. Syed Imran Shafiq, Mohammed Ali, (2009) “Selecting Suppliers in Supply Chain with the help of AHP and ANP Methods” Published in the Proceedings of Ninth Global Conference on Flexible Systems Management, 12–14, November, Mumbai, India (ISBN: 978-81-906294-6-1).
25. Wasifullah Khan, Mohammad Ali, (2009) “FMS: State of the Art and Current Issues” Published in the Proceedings of Ninth Global Conference on Flexible Systems Management, 12–14, November Mumbai, India (ISBN: 978-81-906294-6-1).
26. S. Wadhwa, A. Singholi, Mohammed Ali, (2009) “Evaluating the Effect of Part-mix and Routing Flexibility on FMS Performance” Published in the Proceedings of Ninth Global Conference on Flexible Systems Management, 12–14, November Mumbai, India (ISBN: 978-81-906294-6-1).
27. Mohammed Ali, Mohd. Asjad (2008) “Prediction of Makespan Performance of FMS using ANN Modeling” Published in Proceeding of International Conference on Recent Development in Mechanical Engineering, pp. 303-307, 23-25, January, Saheed Udham Singh College of Engineering and Technology, Tangori (Mohali), India.
28. Mohammed Ali, S. Wadhwa, (2006) “Study of Routing Flexibility in Flexible System Environment” Published in the Proceeding of 18
th The National Computer Conference 26-29, March, organized by Saudi Computer Society at Riyadh,
Saudi Arabia. 29. S. Wadhwa, Mohammed Ali, (2004) “Modeling of Flexibility in Computer Integrated Manufacturing (CIM) Context”
Published in the Proceeding of Third Global Conference in Flexible System Management, pp. 150-160, 13-15, March, Jamia Millia Islamia University, Delhi, India (ISBN: 0-07-058587-3).
30. Mohammed Ali, S. A. H. Rizvi, and M. Muzammil, (1996) “Studies on the Effect of Organismic and Postural Variables on Human Performance in Data Entry and Typing Based Environment” Published in the Proceeding of International Conference on CAD/CAM, Automation, and Robotics and Factories of Future, pp. 465-468, 17-20, December, Jamia Millia Islamia University, Delhi, India (ISBN: 81-7319-139-5).
National Conference/Seminar/Workshop/FDP (21):
31. Wasif Ullah Khan, Mohammed Ali, (2016) “Performance study of RFEMS under Stochastic Environment” Proceeding of National Conference on Mechanical Engineering: Ideas, Innovations and Initiatives, pp.1-7, 16-17, April, Department of Mechanical Engineering, A.M.U., Aligarh, (ISBN: 978-93-85777-56-1).
32. Shahnawaz Mohsin, Imtiaz Ali Khan, Mohammed Ali, (2016) “Ergonomic Evaluation of a CNC Lathe Environment Using Energy Expenditure Prediction Program” Proceeding of National Conference on Mechanical Engineering: Ideas, Innovations and Initiatives, pp.8-17, 16-17, April, Department of Mechanical Engineering, A.M.U., Aligarh, (ISBN: 978-93-85777-56-1).
33. Mohd. Shaaban Hussain, Mohammed Ali, (2016) “Sustainability in Manufacturing Systems Operations” Proceeding of National Conference on Mechanical Engineering: Ideas, Innovations and Initiatives, pp.32-36, 16-17, April, Department of Mechanical Engineering, A.M.U., Aligarh, (ISBN: 978-93-85777-56-1).
34. Shafi Ahmad, Mohammed Ali, (2016) “Integrated CAD/CAM System for Manufacturing of Complex Components” Proceeding of National Conference on Mechanical Engineering: Ideas, Innovations and Initiatives, pp.201-205, 16-17, April, Department of Mechanical Engineering, A.M.U., Aligarh, (ISBN: 978-93-85777-56-1).
35. Mohammed Ali, (2014) “Decision and Information based Performance Evaluation of Flexible Systems” Published in the Proceeding of National Conference on Industrial Engineering and Technology Management, 29-31, October, NITIE and IIIE, Mumbai.
36. Mohammed Ali, (2011) “Modeling of Manufacturing Systems through ARENA” Proceedings of ISTE Sponsored One Week Faculty Development Program on Modeling and Simulation of Manufacturing and Dynamic Systems, 3-7, January, Department of Mech. Engg., Sant Longowal Institute of Engg. & Tech. Longowal, Sangrur,Punjab.
37. Syed Imran Shafiq, Mohammed Ali, (2011) “Performance Evaluation of Discrete part Manufacturing Systems through ARENA Simulation Software” Proceedings of ISTE Sponsored One Week Faculty Development Program on Modeling and Simulation of Manufacturing and Dynamic Systems, 3-7, January, Department of Mech. Engg., Sant Longowal Institute of Engg. & Tech. Longowal, Sangrur, Punjab.
38. Mohammed Ali (2010) “Decision Support System for Flexibility Based Manufacturing System” Published in the Proceeding of National Conference on Advanced Mechanical Engineering, pp.102-111, 27-28, November, , University Polytechnic, A.M.U., Aligarh. (ISBN:978-93-80697-33-8).
39. Imran Shafiq, Mohammed Ali, (2010) “Performance Evaluation of a Manufacturing System through Simulation” Published in the Proceedings of National Conference on Advanced Mechanical Engineering, pp. 123-129, 27-28, November, University Polytechnic, A.M.U., Aligarh, (ISBN:978-93-80697-33-8).
40. Syed Imran Shafiq, Mohammed Ali, Wasif Uullah Khan, (2010) “Implementation Issues of Artificial Neural Network in Flexible Manufacturing System” Published in the Proceedings of National Conference on Advanced Mechanical Engineering, pp.3-9, 27-28, November, University Polytechnic, A.M.U., Aligarh, (ISBN:978-93-80697-33-8).
41. Mohd Shabaan Husain, Mohammed Ali, Syed Imran Shafiq, (2010) “Simulation Based Study for Performance Evaluation of a Lock Manufacturing Firm” Published in the Proceedings of National Conference on Advanced Mechanical Engineering, 27-28, pp. 94-101, November, University Polytechnic, A.M.U., Aligarh, (ISBN:978-93-80697-33-8).
42. Aslam Adil, Rafid Suhail, Md. Irfan, Mohammed Ali (2010) “Flexible Headlights for a Four Wheeler” Published in the Proceedings of National Conference on Advanced Mechanical Engineering, pp.295-299, 27-28, November, University Polytechnic, A.M.U., Aligarh, (ISBN:978-93-80697-33-8).
43. Pervez Alam, Mohammed Ali, (2009) “Effect of Flexible Sitting Postures on the performance of Female in CIM Context”
Published in the Proceedings of All India Seminar on Ergonomics for Improved Productivity, pp. 171-176, 21-22, November, Ergonomics Research Division, Department of Mechanical Engineering, A.M.U., Aligarh, (ISBN: 978-93-80043-48-7).
44. Amrik Singh, Mohammed Ali, (2009) “Error Compensation in Machine Tools” Published in the Proceedings of National Conference on Welding Technology, pp. 165-172, 13-14, February , SLIET, Longowal.
45. Dougresh Sharma, Mohammd Ali, (2009) “Application of GA for scheduling of FMS: A Case Study” Published in the Proceedings of National Conference on Advanced Manufacturing Techniques, pp. 152-158, 5-6, November, Shri Mata Vaishno Devi University, Katra, JK.
46. Mohammed Ali, (2009) “Flexible Manufacturing System” Published in the Proceedings of UGC-Workshop on Advances in Mechanical Engineering, 23-28, March, Faculty of Technology & Engg., M.S.University Baroda, Vododra, Gujarat, India.
47. Mohammed Ali, Mukesh Kumar, (2007) “A Conceptual Framework of Flexibility Focused Integrated Manufacturing System” Published in the Proceedings of National Conference on Recent Advances in Mechanical Engineering, pp. 179-184, 28-29, March, Department, Baba Saheb Dr. Bhim Rao Ambedker College of Engg. & Tech. Etawah, UP, India.
48. S. Wadhwa, Mohammed Ali, R. S. Subramanian, (2006) “Performance of Flexible Manufacturing System under Alternative Load Conditions” Published in the Proceedings of National Conference on Advances in Mechanical Engineering System Management, pp. 308-319, 20-21, January, Jamia Millia Islamia University, Delhi, (ISBN: 81-8032-105-2).
49. Mohammed Ali, S. Wadhwa (2005) “Flexible Manufacturing System with Inspection Strategies: A Conceptual Framework” Published in the Proceedings of National Conference on Competitive Manufacturing Technology and Management for Global Marketing, pp. 143-148, 7-8, January, Crescent Engineering College, Vandalur, Chennai,
50. Mohammed Ali (2001) “Studies on the Effect of Organismic and Postural Variables on Human Performance in CIM Environment” Published in the Proceeding of National Workshop on Industrial Problems in Machines and Mechanics, pp. 126-129, 19-20, January, Priyadarshini College of Engineering and Architecture, Nagpur.
51. Mohammed Ali, Faisal Talib (2000) “Solving Problems of Small Enterprises in Aligarh through EDPT (Entrepreneurship Development Training Programme.” Proceeding of National Seminar on India Towards Entrepreneual Society, pp. 195-204, 15-16, November TTTI, Chandigarh.
Publication of Abstract (10):
52. Mohammed Ali, Irfan Haider, Rafid Suhail (2013) “Performance Evaluation of Traffic Flow at Toll Booth using Simulation” 2
nd National Conference on Recent Advances in Technology and Engineering”, Institute of Engineering & Technology, 15-
17, March, Mangalayatan University, Aligarh. 53. Mohammed Ali, Irfan Haider, Rafid Suhail (2013) “Performance Evaluation of a Manufacturing System by VSM and
Simulation” 2nd
National Conference on Recent Advances in Technology and Engineering”, Institute of Engineering & Technology, 15-17, March, Mangalayatan University, Aligarh.
54. Mohammed Ali, (2013) “Performance Evaluation of Flexible Manufacturing System with Central Buffer” National Conference on Emerging Trends in Science, Technology & Management- Vision 2020. 18-19, January, Gurgaon institute of Technology & Management (GITM), Gurgaon, Haryana (Paper presented during the Conference).
55. Mohammed Ali, (2012) “Performance Evaluation of Flexible System of Integrated Manufacturing with Finite Central Buffer Capacity” National Conference on Emerging Trends in Mechanical & Electrical Engineering, 12-13, June, Department of Mechanical Engineering, Integral University, Lucknow, (Paper presented during the Conference).
56. Mohammad Murshid, Mohammed Ali, Azmat Ali Khan, (2012) “Impact of Loading and Unloading Strategy on Performance of Flexible Manufacturing System at Various Level of Routing Flexibility” National Conference on Emerging Trends in Mechanical & Electrical Engineering, 12-13, June, Department of Mechanical Engineering, Integral University, Lucknow.
57. Mohammed Ali, (2008) “Performance of Flexible System under Alternative Control Strategies” 12th Annual International Conference of Society of Operation Management, 19-21, December, IIT-Kanpur, (Paper presented during the conference).
58. Mohammed Ali, Mukesh Kumar, (2007) “An Analytical Hierarchy Process (AHP) Framework for Selecting Flexible Manufacturing System” 2
nd National Conference on Interdependence, Integration and Co-Ordination, 1-2, December,
Global Institute of Flexible Systems Management and Jaipuria Institute of Management, Lucknow. 59. Mohammed Ali, S. Wadhwa, (2005) “A Conceptual Framework of Flexibility Focused Integrated Manufacturing System”
14th ISME International Conference on Mechanical Engineering in Knowledge Age, 12-14, December, Delhi College of Engineering, Delhi.
60. S. Wadhwa, Mohammed Ali, (2004) “Manufacturing Flexibility: A Way to Sustain Competitiveness” 8th
Annual International Conference on Supply Chain Management in Global Enterprises, 17-20 December, organized by Society of Operation Management in association with National Institute of Industrial Engineering (NITIE), Mumbai.
61. Mohammed Ali (2001) “Implementation Implications of JIT Techniques in Enhancing Productivity: Some Indian Experiences” National Seminar on Transformation Issues of Management in the ICE Age 10-11, February, Indian Institute of Science and Management, Ranchi.
Chapter in Book (2):
62. Mohammed Ali (2011) “Performance Evaluation of Flexible System of Integrated Manufacturing under Routing Flexibility” Agile Manufacturing Systems, Ed. K. Hans Raj, A. K. Verma, S. N. Diwedi, C. Patwardhan, D. S. Mishra, R. S. Sharma, pp.621-626, Narosa Publishing House, Delhi (ISBN: 978-81-8487-200-2).
63. S. Wadhwa, Mohammed Ali, (2003) “A Flexibility Perspectives in E-Governance” Towards E-Governance Management and Challenges Ed. Dr. M. P. Gupta, pp. 271-280, Tata McGraw Hill Publishing Company Ltd., New Delhi, India (ISBN: 0-07-058360-9).
Citations:
Look at http://scholar.google.com/citations?hl=en&user=c1d7HpcAAAAJ
Personal Details:
Father’s Name : Mr. (Late) Mohammed Jan Ali
Mother’s Name : Mrs. Hakeemun Nisa
Date of Birth : 01st
January, 1969
Permanent Address : 85, Rafi Ahmad Kidwai Road, Kolkata-700013. W.B. India