CREATING AN ENGINEERING DRIVEN CORE COMPETITIVENESS 创造以工程技术为驱动的核心竞争力 May 2017 Training Seminar A one-week Seminar introducing the following topics: 1. Introduction to Hardware and Its Selection (2 days) 2. Assembly Processes (0.5 day) 3. Standards and Standardization (1 day) 4. Hole Preparation and Cold Hole Expansion (1 day) 5. Engineering Order & Supersession List (0.5 day) Schedule May 8 th to 12 th , 2017 Mississauga, Ontario, Canada Registration Deadline: Prior to April 28 th , 2017 Fees List: USD $ 5,880 per person Early Bird: USD $ 4,998 per person Early Bird Fees are valid for registration received prior to January 26 th , 2017 Fees exclude accommodation and transportation. Get the complete seminar schedules and register at: training.avicast.com For more information, please contact us as [email protected]2017 年 5 月培训研讨会: 为期一周的培训研讨,培训涵盖以下内容: 1. 介绍标准件和选用(两天) 2. 安装工艺(半天) 3. 标准和标准化 (一天) 4. 钻孔准备(一天) 5. 工程指令和替换清单(半天) 2017 年 5 月 8 号到 12 号 米西索加市,安大略省,加拿大 注册缴费截止日期:2017 年 4 月 28 日 培训费用:每人五天$5880 美元 提前报名:每人五天$4998 美元(2017 年 1 月 26 日前注册缴费) 食宿交通费用不涵盖在内。 注册网址:training.avicast.com 注册邮箱:[email protected]AVICAST Inc. 4284 Village Centre Court Mississauga, L4Z 1S2 Ontario, Canada +1 905.306.9669 Tel +1 905.306.0119 fax [email protected]
15
Embed
CREATING AN ENGINEERING DRIVEN CORE COMPETITIVENESS …
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CREATING AN ENGINEERING DRIVEN CORE COMPETITIVENESS
创造以工程技术为驱动的核心竞争力
May 2017 Training Seminar A one-week Seminar introducing the following topics:
1. Introduction to Hardware and Its Selection (2 days) 2. Assembly Processes (0.5 day) 3. Standards and Standardization (1 day) 4. Hole Preparation and Cold Hole Expansion (1 day) 5. Engineering Order & Supersession List (0.5 day)
Schedule May 8th to 12th, 2017 Mississauga, Ontario, Canada Registration Deadline: Prior to April 28th, 2017
Fees List: USD $ 5,880 per person Early Bird: USD $ 4,998 per person Early Bird Fees are valid for registration received prior to January 26th, 2017 Fees exclude accommodation and transportation. Get the complete seminar schedules and register at: training.avicast.com For more information, please contact us as [email protected]
CREATING AN ENGINEERING DRIVEN CORE COMPETITIVENESS
创造以工程技术为驱动的核心竞争力
2017 June Training Seminar one-week Seminar introducing the following topics:
1. Plumbing Fluid Systems (1 days) 2. Electrical Connectors (1 day) 3. Bearing (1 day) 4. Hardware and its Selection – Intermediate (2 days)
Schedule June 12th to 16th, 2017 Mississauga, Ontario, Canada Registration Deadline: Prior to May 31st, 2017
Fees List: USD $ 5,880 per person Early Bird: USD $ 4,998 per person Early Bird Fees are valid for registration received prior to March 10th, 2017 Fees exclude accommodation and transportation. Get the complete seminar schedules and register at: training.avicast.com For more information, please contact us as [email protected]
CREATING AN ENGINEERING DRIVEN CORE COMPETITIVENESS
创造以工程技术为驱动的核心竞争力
September 2017 Training Seminar A one-week Seminar introducing the following topic:
Composite Materials – Intermediate (5 days) Schedule Sep 11th to 15th, 2017 Mississauga, Ontario, Canada Registration Deadline: Prior to August 31st, 2017
Fees List: USD $ 5,880 per person Early Bird: USD $ 4,998 per person Early Bird Fees are valid for registration received prior to June 30th, 2017 Fees exclude accommodation and transportation. Get the complete seminar schedules and register at: training.avicast.com For more information, please contact us as [email protected]
Hardware and Its Selection: This topic focuses on hardware used on an aircraft. The selection principle for hardware is very critical during the early design stages of an aircraft as it is used in large quantities and often used on critical parts of an aircraft. Selection of inappropriate hardware can often cause delay in production and induce higher procurement costs due to limited availability, challenging maintenance and assembly processes.
Target Groups:
Engineers from design and standardization department of OEMs and design institutes
Engineers from fastener manufacturing companies
Learning Objectives: Learn to interpret standards
Understand hardware characteristics
Identify common hardware used by major international OEMs
Learn the process to create a Recommended Parts List per hardware category
Understand the importance of availability, cost and maintainability of hardware
Instructor: Bruce McDonald and Jay Rotsch Senior Engineers at AVICAST Inc.
Training Duration: Introduction Course - 2 Days
Intermediate Course - 2 Days
标准件和标准件选用:
介绍在飞机上使用的标准件。标准件选用在初步飞机设计时是非常重要的。选用不合适的标准件能导致飞机
生产延误和更高的采购成本并且影响飞机的维修性和组装性。
目标群体:
培训适合飞机制造商设计和标准部门和设计中心的工程师参与
培训适合紧固件制造商的工程师参与
目标:
了解标准
了解标准件特性
了解国外飞机制造商普遍使用的标准件
了解推荐标准件目录
了解标准件的可采购性,价格和可维修性
讲师: Bruce McDonald and Jay Rotsch
艾维高斯高级专家
培训天数:
介绍课程-两天
中高级课程-两天
CREATING AN ENGINEERING DRIVEN CORE COMPETITIVENESS
创造以工程技术为驱动的核心竞争力
AVICAST Inc.
4284 Village Centre Court Mississauga, L4Z 1S2
Ontario, Canada +1 905.306.9669 Tel +1 905.306.0119 fax
Assembly Processes: This topic addresses assembly processes related to aircraft manufacturing. Understanding of aircraft assembly processes is critical for ensuring timely production of the aircraft and its components.
Target Groups:
Manufacturing Engineers and Mechanics from OEMs
Manufacturing Engineers and Mechanics from MROs
Learning Objectives: Learn different types of assembly jigs
Understand drill jigs
Learn types and selection of temporary fasteners
Instructors: Bruce McDonald
Senior Engineers at AVICAST Inc.
Training Duration:
Half Day
安装工艺:
介绍飞机的安装工艺。通过了解飞机的安装工艺确保按时组装飞机部件和飞机。
目标群体:
培训适合飞机制造商的工程师和机械师
培训适合飞机维修商的工程师和机械师
目标:
了解装备夹具类别
了解钻模
了解临时紧固件类别和选用
讲师: Bruce McDonald and Jay Rotsch
艾维高斯高级专家
培训天数:
半天
CREATING AN ENGINEERING DRIVEN CORE COMPETITIVENESS
创造以工程技术为驱动的核心竞争力
AVICAST Inc.
4284 Village Centre Court Mississauga, L4Z 1S2
Ontario, Canada +1 905.306.9669 Tel +1 905.306.0119 fax