This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Crawler excavator R 926R 916
Operating weight: 49,603 – 60,075 lb 54,674 – 62,390 lbEngine output (SAE J1349): 154 HP / 115 kW 173 HP / 129 kWEngine output (ISO 9249): 157 HP / 115 kW 175 HP / 129 kWBucket capacity: 0.98 – 1.70 yd³ 1.24 – 2.03 yd³
2 R 916 Litronic R 926 Litronic
R 916 R 926Advanced Advanced
Operating weight: 49,603 – 60,075 lbEngine output (SAE J1349): 154 HP / 115 kWEngine output (ISO 9249): 157 HP / 115 kWBucket capacity: 1.24 – 1.55 yd³
Operating weight: 54,674 – 62,390 lbEngine output (SAE J1349): 173 HP / 129 kWEngine output (ISO 9249): 175 HP / 129 kWBucket capacity: 1.24 – 1.55 yd³
3R 916 Litronic R 926 Litronic
PerformanceThanks to its innovative system technology, the Advanced crawler excavator has performance features that are truly unique. The energy efficient Positive Control dual-circuit hydraulic system is designed specifically to allow multiple functions or machine movement at the same time. The electronic pump control sets a new standard for perfor-mance and efficiency.
ReliabilityBacked by more than 50 years experience designing and building hydraulic excavators, Liebherr designed the new Generation 6 Excavators to provide the maximum in reli-ability and performance.
ComfortDesigned to the latest ergonomic standards, the operators cab provides exceptional comfort, ease of operation and an outstanding, wide view to the working area. For Liebherr, comfort also applies to service, with centrally located service points and easy, rapid access.
EconomyCrawler excavators from Liebherr guarantee maximum productivity. The optimized interaction of hydraulics and electronics means that individual movements as well as multiple functions can be performed at the same time without decreasing efficiency.
Advanced integrated excavator system technologyHigh-tech for high performance
TheAdvancedexcavatorsfeaturesthenewly-developedintegratedexcavatorsystemtechnology.This isbasedonthePositiveControlhydraulicsystem,controlledbyLiebherrelectronicsandthesystemsoftware.Thesen-sorslocatedatstrategicpointsonthemachineformthebasis for an intelligent system that allows for fast andefficientwork.
Positive Control dual-circuit hydraulic system
When traveling straight, turning or performing workfunctions, the two hydraulic pump circuits are eithergrouped togetheroroperated independently.Operat-ingseparately,thepumpscansupplycomponentswithdifferentloadpressuresandflowsindependently,whilecombining the flow formaximumspeedandmultiplefunctionsforoptimumefficiency.
Power and speedFaster work cycles TheAdvancedexcavators featuresquickworkingcy-
With an operating pressure of 5.511 PSI, the R 916Advancedachieveshigherhydraulicallylimitedloadca-pacitiesandhigherdiggingforces,ofupto29.675lbf,and break-out forces of up to 40.244 lbf; perfect fordifficultapplications.
R 926 Advanced operating pressure
With an operating pressure of 5.511 PSI, the R 926Advancedachieveshighhydraulically limitedloadca-pacitiesandhigherdiggingforces,ofupto33.946lbf,andbreak-outforcesofupto43.388lbf.
High stability undercarriageImproved force distribution
Thenewundercarriageconceptof theGenera-tion6crawlerexcavatorsincreasesperformanceandimprovesservice life.Thecentersection isextended to the ends of the side frames in animprovedXframedesign-resultinginimproveddistributionofloadforces.
High performance travel drive
Thankstoapowerfultraveldrive,theGeneration6crawlerexcavatorsarewellsuitedfortravelandtransportofloadsacrossdifficultterrain.Thelargesprocket reduces track vibrations and increasestravel speed to 3.8 mph (6.1 km/h), making theR 916 Advanced and the R 926 Advanced thefastestexcavatorsintheirclass.
Technology with perspectiveQuality right down to the finest detail
ROPS cab structure Thecab isequippedwithan integrated roll-overprotection system (ROPS) in accordance with ISO12117-2.
Ready for the demands of the future
The Advanced Liebherr system technology canbeupdatedatanytimebyLiebherrServicepersonneltoanewerversion-makingitreadytomeetthedemandsofthefutureandpreparedforfuturedevelopmentsandoptions.
The 7-inch, high resolution color display featuresan integratedviewfromtherear-viewcamera.Thescreen can be operated via a rotating/pushbuttonarrangementorviaanoptionaltouchscreenandisdesignedtobeglarefree.
Wide camera viewing field
The optional rearview camera for the R 916 andR926Advanced,withaviewingangleofmorethan120º,providesacompleteviewoftheareabehindthemachine.
Crawler excavators from Liebherr guarantee maximum productivity. The opti-mizedinteractionofhydraulicsandelectronicsmeansthatindividualmovementsaswellasmultiplefunctionscanbeperformedatthesametimewithoutdecreas-ingefficiency.
Economical technologyCosts savings thanks to fuel efficiency
Fuel savingsareachieved thanks to the integratedexcavator system technology and the efficient en-gine and hydraulics management. When not per-formingatask,thesensor-controlledfunctionauto-maticallyidlestheengine,reducingfuelconsumptionandemissions.
with high quality materials and superior workman-ship-guaranteeingalongservicelife.
Environmental protection and recycling
All Liebherr engines meet the exhaust gas direc-tives specified by law, of Stage IIIA/ Tier 3, whichmeansreducednitrogenoxideandfinedustemis-sions.WithLiebherr,concernfortheenvironmentisextended to thewholemachine.Up to95%ofallthecomponents fromaLiebherrexcavatorcanberecycled,andonlylead-freepaintsareused.
12 R 916 Litronic R 926 Litronic
Technical Data R 916 Advanced
EngineRating per SAE J1349 ������������� 154 HP (115 kW) at 1,800 rpmRating per ISO 9249 ��������������� 157 HP (115 kW) at 1,800 rpmModel ������������������������������� Liebherr D 934 SType ��������������������������������� 4 cylinder in-line Bore/Stroke ������������������� 4.80/5.35 in Displacement ����������������� 388 in3
Engine operation ������������������� 4-stroke dieselunit pump system turbo-charged after-cooled and fuel cooled reduced emissions
Cooling ����������������������������� water-cooled and integrated motor oil coolerAir cleaner �������������������������� dry-type air cleaner with pre-cleaner, primary and
safety elementsFuel tank ���������������������������� 100 galElectrical system Voltage ������������������������ 24 V Batteries ���������������������� 2 x 135 Ah/12 V Starter ������������������������� 24 V/6.6 kW Alternator���������������������� three phase current 28 V/80 A Engine idling ������������������ sensor-controlledIntegrated engine management Advanced ��������������������� connection to the integrated system via CAN-BUS is
available
Hydraulic SystemHydraulic system ������������������ Positive Control Advanced. Dual circuit hydraulic
system for independent and need-based quantity allotment via the hydraulic pumps; sensor-guided. Features high system dynamics and sensitivity pro-vided by integrated system controlling
Hydraulic pump �������������������� Liebherr variable displacement pump built in trans-versal plate style, in parallel arrangement with inte-grated transfer box
Max. flow ���������������������� 2 x 57 gpm Max. pressure ���������������� 5,511 psiPump management ��������������� electronic pump management via the integrated
system controlling (CAN-BUS) synchronous to the control block
Hydraulic tank ���������������������� 77 galHydraulic system ������������������ max. 132 galHydraulic oil filter ������������������ 1 full flow filter (20 μm) in return line with integrated
fine filter area (5 μm)Hydraulic oil cooler ���������������� compact cooler, consisting of a water cooler, sand-
wiched with hydraulic oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan
MODE selection �������������������� adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for economical and environmentally friendly operation or for maximum digging per formance and heavy-duty jobs
RPM adjustment ������������������� stepless adjustment of engine output via rpm at each selected mode
Liebherr Tool Control �������������� 10 preadjustable pump flows and pressures for add-on tools
Hydraulic ControlsThe controlling is conducted via the integrated system technology, input and output modules, communicated via the CAN-BUS with the electronic central unit.Power distribution ����������������� via control valve with integrated safety valvesServo circuit Attachment and swing ������� proportional via joystick levers Travel �������������������������� – with proportionally functioning foot pedals or
adjusted with removable levers – speed pre-selectionAdditional functions ��������������� proportional regulation via slide switches or foot
pedals
Swing DriveAdvanced ��������������������������� shockless and antireactionDrive �������������������������������� Liebherr swash plate motorTransmission ����������������������� Liebherr compact planetary reduction gearSwing ring �������������������������� Liebherr, sealed single race ball bearing swing ring,
Operator’s CabCab ���������������������������������� ROPS safety cab structure with individual wind-
shields or featuring a slide-in subpart under the roof, work headlights integrated in the roof, a door with a side window (can be opened on both sides), large storage compartments, shock-absorbing suspension, sounddampening insulating, tinted laminated safety glass, separate window shades for the sunroof and windshield
Operator’s seat �������������������� Liebherr-Air-Comfort seat, airsprung with automatic weight adjustment, vertical and horizontal seat dampening including consoles and joysticks. Seat and armrests adjustable separately and in combina-tion, seat heating as standard
Control system ��������������������� arm consoles, swinging with the seatOperation and displays ����������� large high resolution color display with self explana-
tory operation via touch screen or turn/push button, video capability, versatile adjusting, control and monitoring facilities, e.g. climate control, implement and tool parameters
Air-conditioning �������������������� standard automatic air-conditioning, ambient air func-tion, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; ambient air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures
UndercarriageLC ����������������������������������� standard gauge (7’10”)Drive �������������������������������� Liebherr swash plate motors with integrated brake
valves on both sidesTransmission ����������������������� Liebherr planetary reduction gearsTravel speed ����������������������� low range – 2.3 mph
high range – 3.8 mphNet drawbar pull on crawler ������ 44,737 lbfTrack components ����������������� B 60, maintenance-freeTrack rollers/Carrier rollers �������� 8/2Tracks ������������������������������� sealed and greasedTrack pads ������������������������� triple-grouserDigging locks ����������������������� wet multi-discs (spring applied, pressure released)Brake valves ������������������������ integrated into travel motorLashing eyes ����������������������� integrated
AttachmentType ��������������������������������� combination of resilient steel plates and cast steels
componentsHydraulic cylinders ���������������� Liebherr cylinders with special seal-system, shock
absorbingPivots ������������������������������� sealed, low maintenanceLubrication ������������������������� automatic central lubrication system (except link and
tilt geometry)Hydraulic connections ������������ pipes and hoses equipped with SAE split-flange
connectionsBucket ������������������������������ fitted as standard with Liebherr tooth system
Gooseneck Boom 18’8”Stick length ft in 7’ 3” 7’10” 8’10” 9’10”V ft in 18’10” 18’ 3” 17’ 5” 16’ 5”W ft in 9’ 8” 9’ 8” 9’10” 10’ X ft in 31’ 31’ 31’ 2” 31’ 2”
Straight Gooseneck Boom 19’8”Stick length ft in 7’ 3” 7’10” 8’10” 9’10”V ft in 20’ 6” 20’ 19’ 4” 18’ 6”W ft in 9’ 2” 9’ 4” 9’ 8” 10’ X ft in 32’ 6” 32’ 6” 32’ 6” 32’ 6”
R 9
16
LUZ
V
W
DE
X
K
H
C
Q
A
B
P
N
G
S
Y Y Y Y
Y Y Y Y
Y Y Y V
Y V V y
V y y y
Y Y Y Y
Y Y Y Y
Y Y V V
V V V y
V V y y
14 R 916 Litronic R 926 Litronic
Backhoe Attachment Advancedwith Gooseneck Boom 18’8” and Heavy Duty Counterweight
Digging Envelopewith Quick Change Adapter 1 2 3 4
Stick lengths ft in 7’ 3” 7’10” 8’10” 9’10”
Max. digging depth ft in 19’10” 20’ 6” 21’ 6” 22’ 6”Max. reach at ground level ft in 30’ 6” 31’ 2” 32’ 33’ Max. dump height ft in 20’ 6” 20’10” 21’ 2” 21’ 8”Max. teeth height ft in 30’ 4” 30’ 8” 31’ 2” 31’ 8”
Operating Weight and Ground PressureOperating weight includes basic machine with heavy duty counterweight, gooseneck boom 18’8”, stick 7’10”, quick change adapter 48 and bucket 1.24 yd3.
Undercarriage LC
Pad width in 20” 24” 30”Weight lb 54,675 55,336 56,328Ground pressure psi 8.8 7.5 6.1
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) Bucket without quick change adapter2) Bucket with quick change adapterOther backhoes available on request
Max. material weight Y = ≤ 3,034 lb/yd3, V = ≤ 2,528 lb/yd3, y = ≤ 2,023 lb/yd3, v = not authorized
Cut
ting
wid
th
Cap
acity
IS
O 7
451
Wei
ght
R 9
16
R 916 Litronic R 926 Litronic 15
Lift Capacities Advancedwith Gooseneck Boom 18’8” and Heavy Duty Counterweight
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 816 lb.
Stick 7’3” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 8’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 7’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 9’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) Bucket without quick change adapter2) Bucket with quick change adapterOther backhoes available on request
Max. material weight Y = ≤ 3,034 lb/yd3, V = ≤ 2,528 lb/yd3, y = ≤ 2,023 lb/yd3, v = not authorized
Digging force ISO lbf 31,248 29,675 27,202 25,403 lb 31,305 29,762 27,116 25,353Breakout force ISO lbf 40,241 40,241 40,241 40,241 lb 40,123 40,123 40,123 40,123
with Quick Change Adapter
Digging force ISO lbf 29,900 28,326 26,078 24,279 lb 29,982 28,219 26,014 24,250Breakout force ISO lbf 34,845 34,845 34,845 34,845 lb 34,832 34,832 34,832 34,832
R 9
16
R 916 Litronic R 926 Litronic 17
Lift Capacities Advancedwith Straight Gooseneck Boom 19’8” and Heavy Duty Counterweight
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 816 lb.
Stick 7’3” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 8’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 7’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 9’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
HydraulicsHydraulic tank shut-off valve and pumps •Pressure test ports for hydraulic •Pressure storage for controlled lowering of equipment with engine turned off •Electronic pump regulation •Filter with integrated fine filter area (5 μm) •Stepless work mode selector •Positive Control Advanced •Regeneration Plus function on hydraulic circuit •Electronic control logic •
AttachmentTwo separate pins for hoist cylinder with cast parts •26,455 lb lifting hook with safety link on quick-coupler •Liebherr full-automatic central lubrication system (except connecting link for bucket kinematics) •Additional work light on boom (right) •Cylinders with shock absorbers •Load hold valves on hoist cylinders •
EngineTurbo charger •Conform with level IIIA / Tier 3 emission standard •After-cooled •Unit pump system injection •Sensor controlled engine idling •Dry-type air cleaner w/pre-cleaner, main and safety element •
HydraulicsAdd-on kit rotary drive (including routing) +Bio-degradable hydr. oil +Grapple operation (including routing) +Liebherr proportional control system +Liebherr Tool Control +Bypass filter +Return filter for hammer +
UndercarriageWide step +Reinforced base panel +Reinforced cover and base panel +Straight track guide +D6C conversion kit with 3-piece track guide +Tractive force increase +
Operator’s CabFire extinguisher +Foot support +Electric cooler +Cab with bullet-proof glass (front and roof windows) and roof window wipers +LIDAT Standard (Liebherr data transfer system) +LIDAT Plus (extended Liebherr data transfer system) +Air pressure operator seat •Premium operator seat +Engine shut-down (via push-button) in cab +Bullet-proof roof glass panel with wiper +Radio with SD-/MMC-card, Aux-in +Rear view monitoring with camera +Beacon +Wiper for sunroof +Xenon headlights +Protective grid up FOPS +Protective grid front FGPS +Sun visor +Roof sun screen +Auxiliary heating with timer +Change over controls for clamshell bucket/grapple +Electronic theft protection +Additional halogen headlights behind cab +Additional halogen headlights front cab +
AttachmentAdjustable boom +Adjustable offset boom +Hoist cylinder depth limitation +Security for hoist cylinders +Piston rod cover bucket cylinder +26,455 lb lifting hook on bucket +LIKUFIX +Liebherr line of buckets +Straight gooseneck boom +Safety check valves hoist cylinder +Safety check valves stick cylinder +Hose-protecting lubrication system (stick rear) +Hydr. or mechanical quick change coupler +Overload warning device +Central lubrication of the connecting link for bucket kinematics +Working headlight on boom (left) +
R 9
16
20 R 916 Litronic R 926 Litronic
Technical Data R 926 Advanced
EngineRating per SAE J 1349 ������������ 173 HP (129 kW) at 1,800 rpmRating per ISO 9249 ��������������� 175 HP (129 kW) at 1,800 rpmModel ������������������������������� Liebherr D 934 SType ��������������������������������� 4 cylinder in-line Bore/Stroke ������������������� 4.80/5.35 in Displacement ����������������� 388 in3
Engine operation ������������������� 4-stroke dieselunit pump system turbo-charged after-cooled and fuel cooled reduced emissions
Cooling ����������������������������� water-cooled and integrated motor oil coolerAir cleaner �������������������������� dry-type air cleaner with pre-cleaner, primary and
safety elementsFuel tank ���������������������������� 100 galElectrical system Voltage ������������������������ 24 V Batteries ���������������������� 2 x 135 Ah/12 V Starter ������������������������� 24 V/6.6 kW Alternator���������������������� three phase current 28 V/80 A Engine idling ������������������ sensor-controlledIntegrated motor management Advanced ��������������������� connection to the integrated system via CAN-BUS is
available
Hydraulic SystemHydraulic system ������������������ Positive Control Advanced. Dual circuit hydraulic
system for independent and need-based quantity allotment via the hydraulic pumps; sensor-guided. Features high system dynamics and sensitivity pro-vided by integrated system controlling
Hydraulic pump �������������������� Liebherr variable displacement pump built in trans-versal plate style, in parallel arrangement with inte-grated transfer box
Max. flow ���������������������� 2 x 63 gpm Max. pressure ���������������� 5,511 psiPump management ��������������� electronic pump management via the integrated
system controlling (CAN-BUS) synchronous to the control block
Hydraulic tank ���������������������� 77 galHydraulic system ������������������ max. 132 galHydraulic oil filter ������������������ 1 full flow filter (20 μm) in return line with integrated
fine filter area (5 μm)Hydraulic oil cooler ���������������� compact cooler, consisting of a water cooler, sand-
wiched with hydraulic oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan
MODE selection �������������������� adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for economical and environmentally friendly operation or for maximum digging per formance and heavy-duty jobs
RPM adjustment ������������������� stepless adjustment of engine output via rpm at each selected mode
Liebherr Tool Control �������������� 10 preadjustable pump flows and pressures for add-on tools
Hydraulic ControlsThe controlling is conducted via the integrated system technology, input and output modules, communicated via the CAN-BUS with the electronic central unit.Power distribution ����������������� via control valve with integrated safety valvesServo circuit Attachment and swing ������� proportional via joystick levers Travel �������������������������� – with proportionally functioning foot pedals or
adjusted with removable levers – speed pre-selectionAdditional functions ��������������� proportional regulation via slide switches or foot
pedals
Swing DriveAdvanced ��������������������������� shockless and antireactionDrive �������������������������������� Liebherr swash plate motorTransmission ����������������������� Liebherr compact planetary reduction gearSwing ring �������������������������� Liebherr, sealed single race ball bearing swing ring,
Operator’s CabCab ���������������������������������� ROPS safety cab structure with individual wind-
shields or featuring a slide-in subpart under the roof, work headlights integrated in the roof, a door with a side window (can be opened on both sides), large storage compartments, shock-absorbing suspension, sounddampening insulating, tinted laminated safety glass, separate window shades for the sunroof and windshield
Operator’s seat �������������������� Liebherr-Air-Comfort seat, airsprung with automatic weight adjustment, vertical and horizontal seat dampening including consoles and joysticks. Seat and armrests adjustable separately and in combina-tion, seat heating as standard
Control system ��������������������� arm consoles, swinging with the seatOperation and displays ����������� large high resolution color display with self explana-
tory operation via touch screen or turnpush button, video capability, versatile adjusting, control and monitoring facilities, e.g. climate control, implement and tool parameters
Air-conditioning �������������������� standard automatic air-conditioning, ambient air func-tion, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; ambient air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures
UndercarriageLC ����������������������������������� standard gauge (7’10”)Drive �������������������������������� Liebherr swash plate motors with integrated brake
valves on both sidesTransmission ����������������������� Liebherr planetary reduction gearsTravel speed ����������������������� low range – 2.3 mph
high range – 3.8 mphNet drawbar pull on crawler ������ 50,807 lbfTrack components ����������������� B 60, maintenance-freeTrack rollers/Carrier rollers �������� 9/2Tracks ������������������������������� sealed and greasedTrack pads ������������������������� triple-grouserDigging locks ����������������������� wet multi-discs (spring applied, pressure released)Brake valves ������������������������ integrated into travel motorLashing eyes ����������������������� integrated
AttachmentType ��������������������������������� combination of resilient steel plates and cast steels
componentsHydraulic cylinders ���������������� Liebherr cylinders with special seal-system, shock
absorbingPivots ������������������������������� sealed, low maintenanceLubrication ������������������������� automatic central lubrication system (except link and
tilt geometry)Hydraulic connections ������������ pipes and hoses equipped with SAE split-flange
connectionsBucket ������������������������������ fitted as standard with Liebherr tooth system
R 9
26
R 916 Litronic R 926 Litronic 21
Dimensions Advanced
LU
ZV
W
DE
X
K
H
C
Q
A
B
P
N
G
S
R 9
26
Gooseneck Boom 19’4”Stick length ft in 7’ 3” 7’10” 8’10” 9’10”V ft in 19’10” 19’ 4” 18’ 4” 17’ 9”W ft in 9’ 8” 9’10” 10’ 10’ 2”X ft in 32’ 4” 32’ 4” 32’ 4” 32’ 6”
Straight Gooseneck Boom 19’8”Stick length ft in 7’ 3” 7’10” 8’10” 9’10”V ft in 20’10” 20’ 4” 19’ 8” 18’10”W ft in 9’ 2” 9’ 4” 9’ 8” 10’ X ft in 32’10” 32’10” 32’10” 32’10”
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) Bucket without quick change adapter2) Bucket with quick change adapterOther backhoes available on request
Max. material weight Y = ≤ 3,034 lb/yd3, V = ≤ 2,528 lb/yd3, y = ≤ 2,023 lb/yd3, v = not authorized
Cut
ting
wid
th
Cap
acity
IS
O 7
451
Wei
ght
R 916 Litronic R 926 Litronic 23
R 9
26
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 827 lb.
Lift Capacities Advancedwith Gooseneck Boom 19’4” and Heavy Duty Counterweight
Stick 7’3” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 8’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 7’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 9’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) Bucket without quick change adapter2) Bucket with quick change adapterOther backhoes available on request
Max. material weight Y = ≤ 3,034 lb/yd3, V = ≤ 2,528 lb/yd3, y = ≤ 2,023 lb/yd3, v = not authorized
Digging force ISO lbf 35,969 33,946 31,248 29,000 lb 35,935 33,951 31,306 28,881Breakout force ISO lbf 43,388 43,388 43,388 43,388 lb 43,431 43,431 43,431 43,431
with Quick Change Adapter
Digging force ISO lbf 34,171 32,373 29,900 27,876 lb 34,172 32,408 29,983 27,778Breakout force ISO lbf 37,768 37,768 37,768 37,768 lb 37,699 37,699 37,699 37,699
R 916 Litronic R 926 Litronic 25
R 9
26
Lift Capacities Advancedwith Straight Gooseneck Boom 19’8” and Heavy Duty Counterweight
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lb x 1,000, and can be lifted 360° on firm, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30” wide triple-grouser pads. Indi cated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are limited through the allowed lift capacity of the load hook on the quick change adapter (26,455 lb). Without quick change adapter the lift capacities will increase by 551 lb, without bucket cylinder, link and lever they increase by an additional 827 lb.
Stick 7’3” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 8’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 7’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
25 LC
20 LC
15 LC
10 LC
5 LC
0 LC
– 5 LC
– 10 LC
– 15 LC
Stick 9’10” 10 ft 15 ft 20 ft 25 ft 30 ft Under- ft carriage ft in 30 LC
HydraulicsHydraulic tank shut-off valve and pumps •Pressure test ports for hydraulic •Pressure storage for controlled lowering of equipment with engine turned off •Electronic pump regulation •Filter with integrated fine filter area (5 μm) •Stepless work mode selector •Positive Control Advanced •Regeneration Plus function on hydraulic circuit •Electronic control logic •
AttachmentTwo separate pins for hoist cylinder with cast parts •26,455 lb lifting hook with safety link on quick-coupler •Liebherr full-automatic central lubrication system (except connecting link for bucket kinematics) •Additional work light on boom (right) •Cylinders with shock absorbers •Load hold valves on hoist cylinders •
EngineTurbo charger •Conform with level IIIA / Tier 3 emission standard •After-cooled •Unit pump system injection •Sensor controlled engine idling •Dry-type air cleaner w/pre-cleaner, main and safety element •
Operator’s CabFire extinguisher +Foot support +Electric cooler +Cab with bullet-proof glass (front and roof windows) and roof window wipers +LIDAT Standard (Liebherr data transfer system) +LIDAT Plus (extended Liebherr data transfer system) +Air pressure operator seat •Premium operator seat +Engine shut-down (via push-button) in cab +Bullet-proof roof glass panel with wiper +Radio with SD-/MMC-card, Aux-in +Rear view monitoring with camera +Beacon +Wiper for sunroof +Xenon headlights +Protective grid up FOPS +Protective grid front FGPS +Sun visor +Roof sun screen +Auxiliary heating with timer +Change over controls for clamshell bucket/grapple +Electronic theft protection +Additional halogen headlights behind cab +Additional halogen headlights front cab +
AttachmentAdjustable boom +Adjustable offset boom +Hoist cylinder depth limitation +Security for hoist cylinders +Piston rod cover bucket cylinder +26,455 lb lifting hook on bucket +LIKUFIX +Liebherr line of buckets +Straight gooseneck boom +Safety check valves hoist cylinder +Safety check valves stick cylinder +Hose-protecting lubrication system (stick rear) +Hydr. or mechanical quick change coupler +Overload warning device +Central lubrication of the connecting link for bucket kinematics +Working headlight on boom (left) +
NTB_RS_US_D_5.indd 1 02.12.10 15:15
Printed in Germany by Typodruck RG-BK-RP LFR/SP 11088514-2-01.11_enUS
Liebherr Construction Equipment Co.4100 Chestnut Avenue, Newport News, VA 23607, USA +1 (757) 245 5251, Fax +1 (757) 928 8701www.liebherr.us, E-Mail: [email protected]
The Liebherr Group of Companies
Wide Product RangeThe Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr’s high-value products and services enjoy a high reputation in many other fields, too. The wide range includes domes-tic appliances, aerospace and transportation systems, machine tools and maritime cranes.
Exceptional Customer BenefitEvery product line provides a complete range of models in many different versions. With both their technical excel-lence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application.
State-of-the-art TechnologyTo provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control techno-logy for construction equipment and mining trucks.
Worldwide and IndependentHans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 100 companies with over 32,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company.
www.liebherr.us
Prinect PDF Report 3.0.72 - 1 - 26.01.2011 13:45:44