Lueta Nr. 319, Romania +40758576007 offi[email protected]www.levtech.ro Conducvity 4-20mA transmier LSP-TSC Brief descripon Features Levtech Service & Prodtuction SRL Ÿ Cable capacity compensation Ÿ 4 to 20 mA analog signal output Ÿ TS-35 DIN rail mounting Ÿ +/-0.1% accuracy Ÿ Ip20 case Ÿ Screw terminals Ÿ Easy to install Ÿ Cyclical self-calibration Ÿ Power LED The LSP-TSC conductivity transmitter is a simple and cost effective instrument for liquid conductivity measurement, it measures the conductivity of liquids with the corresponding sensor and transmit a 4-20mA analog signal without temperature compensation. The device is pre-configured for 2 wire sensor with 0.1 k factor and measures between 0 to 200 mS/cm.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Ÿ Cable capacity compensationŸ 4 to 20 mA analog signal outputŸ TS-35 DIN rail mountingŸ +/-0.1% accuracyŸ Ip20 caseŸ Screw terminalsŸ Easy to installŸ Cyclical self-calibrationŸ Power LED
The LSP-TSC conductivity transmitter is a simple and cost effective instrument for liquid conductivity measurement, it measures the conductivity of liquids with the corresponding sensor and transmit a 4-20mA analog signal without temperature compensation. The device is pre-configured for 2 wire sensor with 0.1 k factor and measures between 0 to 200 mS/cm.
Specification
Supply voltage 16 to 30 VDCPower consump�on < 100mWOver Voltage surge protec�on 36VReverse-polarity protec�on
Ra�ng: IP20Dimension: 85 (L) x 25 (D) x 80 (H)Weight: approx. 50gDIN rail mountable housing to TS-35 DIN
2 Screw terminals with maximum 2.5 mm cable cros-sec�on
Ambient temperature: -10 to +60 °CStorage temperature: -30 to 80 °CHumidity : 0 to 95% RH at 40 °C, no condensa�on