Propipe, a specialist manufacturer of specialized pipes and fi3ngs to serve major industry players across the energy and environmental value chain, has a “HotTap & Line Stop Division” to provide noshutdown piping soluDons to customers. With our decades as a world class provider of piping soluDons, this expansion will support products diversifies Propipe’s market base and customers’ requirement. We strongly believe that our developing on the unique Hot Tap and Line Stop fi3ngs, equipment and services will provide the best and most cost effecDve soluDon to the specific project need. propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston) [email protected]www.propipe.eu Ho*ap & Line Stop
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Propipe, a specialist manufacturer of specialized pipes and fi3ngs to serve major industry players across the energy and environmental value
chain, has a “Hot-‐Tap & Line Stop Division” to provide no-‐shutdown
piping soluDons to customers. With our decades as a world class provider of piping soluDons, this expansion will support products diversifies
Propipe’s market base and customers’ requirement. We strongly believe
that our developing on the unique Hot Tap and Line Stop fi3ngs,
equipment and services will provide the best and most cost effecDve soluDon to the specific project need.
Place of registraDon: Spain – Madrid RegistraDon info: Registro MercanDl de Madrid tomo 17927
Folio 34 sección 8 Hoja M-‐309532 Inscripción 1ª
C.I.F/VAT.: B-‐83382523. Capital 3,100 Euros
Companies of the group: Propipe Engineering (Spain)
Propipe FZE (U.A.E. Dubai)
Propipe USA (Houston) Turn Over: 4.100.154 EUROS
1.13.26 Accesorios de acero de alto límite elástico con soldadura para tuberías1.13.40 Accesorios de toma en carga, obturación y purga (way-tees y otros) para gas1.13.59 Rascadores y trampas de rascadores3.03.99 Otros servicios relativos a tuberías
Certificado válido hasta el día: 12/06/2013Este certificado indica que el Proveedor en cuestión está registrado en RePro en los productos y/o servicios señalados para las empresas participantes en el Registro de Proveedores. RePro podrá ser utilizado por las Empresas Participantes, bien como base para realizar la selección de proveedores que serán invitados a presentar ofertas, o bien como requisito previo para poder acceder a sus propios sistemas de clasificación
Víctor Arroyo
Director de Operaciones Achilles South Europe, S.L.U.
Pablo García Berenguer
Presidente del Comité En representación de las Empresas Participantes.
Nº RePro: 311074PROPIPE, S.L.
Ha obtenido el registro en RePro para los Productos/Servicios siguientes:
Pag. 2/2 Informe impreso el jueves, 17 de enero de 2013
DESIGN DATA • Design Code: ASME B31.8/4 • Design Pressure: the maximum for each raDng • Design Factor: 0.72 • Design Temperature: from -‐20ºC to 80ºC • Corrosion Allowance: 0 mm NDT TEST (as per ASME V) • 100% RX on but welds • 100% US on the other MATERIALS • A860 All Grades -‐ P355 NL1, P460 NL1 as per EN 10.028-‐3 • Flanges: ASTM A105 Ø ≤ 24” ASME B16.5 Ø > 24” MSS-‐SP-‐44/ASME B16.47. • Bolts & Nuts: ASTM A193 B7/194 2H • Pipe: API 5L Gr.B, ASTM A106 Gr.B, E355 as per EN 10.297 WELDINGS (as per ASME sec. IX) CERTIFICATION 3.1
FOR LARGEST DIAMETERS, PLEASE ASK TO CANADOIL TECHNICAL DEPARTMENT
Flat botom Threaded Fi3ngs Size Weight H Class 150 Class 300 Class 600 inch kg inch mm Part Number Part Number Part Number 2 1 5.0 127 0202.T2F.150 0202.T2F.300 0202.T2F.600 3 3 7.8 198 0303.T2F.150 0303.T2F.300 0303.T2F.600
Ho*ap & Line Stop Services
Propipe has made it our business to keep piping systems on-‐stream during maintenance, retrofi3ng, alteraDons, emergencies and new construcDon. Our
engineering, manufacturing and field personnel are excepDonally qualified to give
you fast, correct and economically feasible answers to any type of piping problems.
We have own people who operate de most complete line of Hot Tapping, Line
stopping, Valve inserDng and Repair Clamps equipment available. Our capabiliDes
assure our customers that we can meet virtually every possible pressure, temperature and size applicaDon.
Please see here some pictures of the workshop:
Tapping Machine
Hot Tap and Line Stop OperaDons: From 2” to 56” Natural Gas, Crude Oil Carbon Steel 150#, 300#, 600# and 900# Temperature from -‐10ºC to 400ºC
Crude Oil Hotap
Hotap 24” 600#
Hotap Job Hotap Equipment
Fi3ngs a|er end of operaDon
Small Hotap
propipe TM 1000 Series Model 1028 Capacity 4" / stroke 28” Model 1032 Capacity 6” / Stroke 32” propipe TM 3000 Series Model 3048 Capacity 12" / stroke 48" Model 3070 Capacity 20" / stroke 70" propipe TM 5000 Series Model 5078 Capacity 36" / stroke 78" Model 5108 Capacity 36" / stroke 108" Model 5130 Capacity 30" / stroke 130" propipe TM 7000 Series Model 7102 Capacity 72" / stroke 102" Model 7130 Capacity 65" / stroke 130" Model 7150 Capacity 55" / stroke 150" propipe HP Hydraulic Power Pack 30 HP Diesel All capacities are for drilling mild steel pipe and may be reduced when operating on other materials. We can design specifically for your requirements. All Models are designed for operation upto 100 bar (1470psi) and 200 C. They are able to cut up to 3" wall thickness mild steel. They are able to cut stainless steel, API Gr.B and API 5L X80 and concrete. They are capable of installing LOR and flow through plugs and are compatible with TD Williamson equipment. All machines have powered feed for cutting that is proportional to the spindle rpm and rapid travel. All machines spindles are compatible with TD Williamson tooling. Specially designed hydraulic power pack has air cooled diesel engine and additional take off for ancillary equipment.
Tapping machines are used for making connecDons to pipelines, tanks, and plant piping without shutdown and are used to make hot taps in preparaDon for plugging machine applicaDon. Our Models series 1000 can be either air or Manual used.
Features The machine includes a Handle and a air motor is opDonal. Model PPM-‐1000 pneumaDc air wrench, with 0.6 HP at 150 r.p.m. motor requiring 500 lt/min. air, suitable to all our 1000 series drilling machines.
Drilling Capacity Stroke Model 1028 1 1/2” – 4” 28” Model 1030 1 1/2” – 6” 30” Model 1032 1 1/2” – 6” 32” The Models 1000 Drilling Machine are available in two versions: 1028 with 28” of travel and the 1032 Model with 32” of travel. They meets NACE Standard and CE, sulfide stress cracking resistant metallic material for oilfield equipment. The maximum working pressure is 1,480 psi (100 bar) at 100°F (38°C). Its operaDng temperatures are -‐20°F (-‐29°C) to 700°F (371°C) at 700 psi (48 bar) for intermitent service. The maximum conDnuous raDng is 350°F (177°C) at 1,025 psi (70 bar). For special requirements, such as higher pressure or temperature, consult the factory. Other features include: Weight :
Model 1028 32 pounds Model 1030 41 pounds Model 1032 50 pounds
Hole Saws / Cutter and Holder Pilots Size On Size Not Size On Size TAP SIZE Cutter Diameter Hole Saw/cutter Holder Pilot Holder Pilot
inch mm Inch mm Stock Number Stock Number Stock Number 1 1/4" 32 1 5/16" 33.3 PHS-1000-32 PHP-SOS-1000-32 PHP-NSOS-1000-32 1 1/2" 38 1 9/16" 39.7 PHS-1000-38 PHP-SOS-1000-38 PHP-NSOS-1000-38
SpecificaDons Drilling Capacity Stroke Model 3048 3” – 12” 48” Model 3066 3” – 16” 66” Model 3070 3” – 20” 70” Dimensions Length 2100mm, Width 500mm, Height 536mm Weight 337kg MounDng 4”Class 600 RTJ Type Flange Boring Bar Chrome Plated One piece bar-‐ Sealed with Chevron Gland 400Bar at 100Deg C Tool MounDng Industry Standard taper Tool RetenDon Manual Drawbar Max Pressure raDng 100Bar (1480psi) Spindle Speed 40RPM with Propipe – H1515 Power Pack Feed Rate 0.07mm / rev Depth Measurement by measuring rod Drive system Hydraulic Motor, lubricaDon free belt drive Hydraulics Pressure 1750psi(118 bar)-‐2000psi(135bar)
Tapping machines are used for making connecDons to pipelines, tanks, and plant piping without shutdown and are used to make hot taps in preparaDon for plugging machine applicaDon. Our Models series 3000 can be either air or hydraulically used.
Features The machine includes: Lower in crank, Measuring rod, Retainer rod pusher, Ring Gasket, Bleeder valve and nipple, Motor adapter, Set of bolts and nuts, Lock-‐O-‐Ring bypass gauge
RAISED FACE (RF) ADAPTOR Size Class 150 Class 300 Class 600
Manual Sandwich Valves Size Class 150 Class 300 Class 600
inch mm Stock Number Stock Number Stock Number 4 100 PSV-04-150 PSV-04-300 PSV-04-600 6 150 PSV-06-150 PSV-06-300 PSV-06-600 8 200 PSV-08-150 PSV-08-300 PSV-08-600
SpecificaDons Drilling Capacity Stroke Model 5078 12” – 36” 78” Model 5108 12” – 42” 108” Model 5130 12” – 56” 130” Dimensions Length 3100mm, Height 760mm, Width 870mm Weight 990 kg MounDng 6”Class 600 RTJ Type Flange Boring Bar 100 mm Diameter Chrome Plated One piece bar Sealed with Chevron Gland 400Bar at 100Deg C Tool MounDng Industry Standard taper Tool RetenDon Manual Drawbar sealed with Chevron Gland Max Pressure raDng 100Bar (1480psi) Spindle Speed 25 RPM with Propipe – H3024 Power Pack Feed Rate 0.12 mm / rev Depth Measurement Absolute Linear Scale mounted alongside machine, no
measuring rod required. Three presentable pointers. Drive system Hydraulic Motor driving spindle via HTD Belt ensuring
lubricaDon and maintenance free spindle drive. Rapid Boring Bar Travel by Hydraulic Motor Hydraulics Pressure 1750psi(118bar)-‐2000psi (135bar) Max
Tapping machines are used for making connecDons to pipelines, tanks, and plant piping without shutdown and are used to make hot taps in preparaDon for plugging machine applicaDon. Our Models series 5000 are hydraulically operated.
Features The machine includes: Lower in crank, Measuring rod, Retainer rod pusher, Ring Gasket, Bleeder valve and nipple, Motor adapter, Set of bolts and nuts, Lock-‐O-‐Ring bypass gauge