Computers

How Dissamble A Fujitsu LAPTOP

By Muneeb

Remember And Make sure

Before Starting you have to make sure the computer is turned off.

All the wire or cable who are connected to pc are unpluged.

Phillips Head Scre Driver

Any kind of Container to place you screws

Any kind of a table to support your PC

TOOLS NEEDED

IMPOTANT STEPS TO REMBER

Lay the pc down on a safe place where can easlly unscrew the PC.

Check and analyz the best way to open the PC. After figurning it out.

Analyz and memorize the screw of each location of the parts or take pic as you go.

STEP#1

Turn the laptop over and remove the marked screws

STEP#2

Remove ram from the laptop

Slide the hard drive to the right to disconnect it from the system board.

STEP#3

Remove all marked screws on the bottom of the laptop.

Now u would be able to take out the touchpad of the laptop.

Take it out

STEP#4

Unplug the belt that is connected from the keyboard to the board

Now slide the keyboard downwards. Take it out

STEP#5

Unscrew the marked Screw

STEP#6

Lift up the laptop display assembly a little bit to Unplug the belt that is connected from the board to laptop display assembly .

Lift up the laptop display assembly and remove it.

STEP#7

Unscrew the screws on the silver board

STEP#8

Now you will be seeing some compoments of the computer

Unscrew the marked screw

Lift up the silver board and put it on the side with your other parts of laptop

STEP#9

Unscrew the marked screws to teek out the mother board, fan etc

STEP#10

The Last part that is left is take out LCD from computer

Unscres the screws from the laptop screen.

STEP#11

Lift up the LCD cover to take out the LCd.

Unplug the belt from the board.

Unscrew The LCD from the board

STEP#12

Finish Dissamble

And thats how You Dissassemble the a Fujitsu Laptop

Thanks for Reading