SMW-AUTOBLOK 233 234 238 241 244 246 6 Collet chucks ■ Bar pulling chucks KSZ-MB Collet chuck ■ for bar machining ■ push actuation KSZ-NZN Collet chuck for neutral axial positioning ■ for bar or shaft machining ■ to push actuation ■ neutral axial position of the workpiece during clamping ■ removable workstop GF 80 INCH serration bar pulling chuck Spring operated bar pulling chuck ■ spring actuation ■ for stationary outside clamping KSZ-DZN KSZ-AZN Draw collet chuck Draw collet chuck with workstop ■ for bar machining ■ draw actuation ■ KSZ-DZN: for bars ■ KSZ-AZN: for bar or shaft machining with removable workstop KSZ-AZL Draw collet chuck including preparation for air sensing ■ for bar or shaft machining ■ draw actuation ■ with built-in air sensing ■ removable workstop Page Page Page Page Page
16
Embed
Collet chucks Bar pulling chucks - Small Tools › content › catalogs › SMW Autoblok...Draw collet chucks Draw collet chuck for bar and shaft machining Application/customer benefi
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SMW-AUTOBLOK 233
234
238
241
244
246
6
Collet chucks ■ Bar pulling chucks
KSZ-MB Collet chuck ■ for bar machining ■ push actuation
KSZ-NZNCollet chuck for neutral axial positioning■ for bar or shaft machining ■ to push actuation ■ neutral axial position of the workpiece during clamping■ removable workstop
GF 80INCH serrationbar pulling chuckSpring operated bar pulling chuck■ spring actuation ■ for stationary outside clamping
KSZ-DZN KSZ-AZNDraw collet chuck Draw collet chuck with workstop■ for bar machining■ draw actuation■ KSZ-DZN: for bars■ KSZ-AZN: for bar or shaft machining with removable workstop
KSZ-AZLDraw collet chuck including preparationfor air sensing■ for bar or shaft machining ■ draw actuation ■ with built-in air sensing ■ removable workstop
Page
Page
Page
Page
Page
234 SMW-AUTOBLOK
KSZ-MB
Collet chuck
Collet chuck for bar machining
Application/customer benefi ts Efficient machining of bar material on automatic bar machines with bar feed.
Less deformation of thin-walled components during clamping.
Quick set-up by means of bayonet locking cap.
For highest speeds.
Clamping/unclamping of chuck during spindle rotation is possible.
Case hardened and ground chuck parts ensure long service life.
Finish-machining of all parts in one set-up guarantees perfect concentricity.
Direct mounting to the machine spindle ensures high concentricity.
High operating reliability due to a minimum of parts.
High axial positioning accuracy of the components by means of push type collet system.
Profi tability Quick and simple installation to all lathes. (alternating with 3-jaw chucks)
Round, square and hexagonal material can be clamped, by simply changing the collet.
Cost effective by using standard collets DIN 6343 as well as standard Rubberflex and Multirange collets.
Collets for highest concentricity for special profiles, vulcanized, coated or ground to size are available on request.
Attention: Chuck position „open“ (left end position) is with end stop in actuating cylinder. Do not actuate chuck without cap nut mounted! Remove pin dia. 3 for rotating ring nut for direct connection in thread dimension T.
Subject to technical changes.For more detailed information please ask for customer drawing.
SMW-AUTOBLOK Type
MountingId. No.
Center mountingShort taper mounting toDIN 55026
Kmax.
Pressure sleeve thread/thread depth
max. speed r.p.m.
max. actuating force daN
max. gripping force daNWeight withoutcollets
kg
rec. actuating cylinders Type
Speed r.p.m.
Englisch
236 SMW-AUTOBLOK
KSZ-MB40
KSZ-MB60
KSZ-MB80 - 193 E
Z140088174
Z170088175
Z220*091209*
Z220088176
A 05 088180
A 06 088179 088178
A 08 088177 091209*
KSZ-MB40
KSZ-MB60
KSZ-MB80
0360790 0360810
0360720/0361792 0360121/0361360 0362082/0360135
0362081/0360134
Ø 3012961
3.5012962
4012963
4.5012964
5012965
5.5012966
6012967
6.5012968
7012969
7.5012970
8012971
8.5012972
9012973
Ø 9.5012974
10012975
10.5012976
11012977
11.5012978
12012979
12.5012980
13012981
13.5012982
14012983
14.5012984
15012985
15.5012986
Ø 16012987
16.5012988
17012989
17.5012990
18012991
18.5012992
19012993
19.5012994
20012995
20.5012996
21012997
21.5012998
22012999
Ø 22.5013000
23013001
23.5013002
24013003
24.5013004
25013005
25.5013006
26013007
26.5013008
27013009
27.5013010
28013011
28.5013012
Ø 29013013
29.5013014
30013015
30.5013016
31013017
31.5013018
32013019
32.5013020
33013021
33.5013022
34013023
34.5013024
35013025
Ø 35.5013026
36013027
36.5013028
37013029
37.5013030
38013031
38.5013032
39013033
39.5013034
40013035
40.5013036
41013037
41.5013038
Ø 42013039
6013040
7013041
8013042
9013043
10013044
11013045
12013046
13013047
14013048
15013049
16013050
17013051
19013052
20016428
21016429
22013053
24013054
26016430
27013055
28016431
30013056
31016432
32013057
36013058
6013059
7013060
8013061
9013062
10013063
11013064
12013065
13013066
14013067
15013068
16013069
18013070
20013071
22013072
25013073
28013074
Ø 7-9013076
9-11013077
11-13013078
13-15013079
15-17013080
17-19013081
19-21013082
21-23013093
23-25013083
25-27013084
27-29013085
29-31013086
31-33013087
Ø 33-35013088
35-37013089
37-39013090
39-41013091
41-43013092
KSZ-MB
Collet chuck Ordering review
Accessories for KSZ-MB
Collets for KSZ-MB 40
Size Spindlemounting
Centering rimstandard
Centering rimlarge
Supply range: Chuck and mounting bolts
Size
AccessoriesBlank adapterReduction forsmaller collets(comprisingpressure sleeveand cap nut)
KSZ-MB size 40to size 26
KSZ-MB size 60to size 40
KSZ-MB size 80to size 40
KSZ-MB size 80to size 60
* Attention: KSZ-MB 80-193E with standard centering rim (Id.-No. 091209) has outside centering 220 mm (and also inside taper A8)
Steel collets DIN 6343 series 173 EROUND*
Rubberfl ex collets series 36 (recommended for raw part clamping)ROUND
HEXAGONAL**
SQUARE**
* concentricity according to DIN 6343** concentricity has to be agreed
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Englisch
SMW-AUTOBLOK 237
6
Ø 4013112
5013113
6013114
7013115
8013116
9013117
10013118
11013119
12013120
13013121
14013122
15013123
16013124
Ø 17013125
18013126
19013127
20013128
21013129
22013130
23013131
24013132
25013133
26016434
27013134
28013135
29013136
Ø 30013137
31013138
32013139
33013140
34013141
35013142
36013143
37013144
38016435
39013145
40013146
41013147
42013148
Ø 43013149
44013150
45013151
46013152
47013153
48013154
49013155
50013156
51013157
52013158
53013159
54013160
55013161
Ø 56013162
57013163
58013164
59013165
60013166
Ø 20013237
21013238
22013239
23013240
24013241
25013242
26013243
27013244
28013245
29013246
30013247
31013248
32013249
Ø 33013250
34013251
35013252
36013253
37013254
38013255
39013256
40013257
41013258
42013259
43013260
44013261
45013262
Ø 46013263
47013264
48013265
49013266
50013267
51013268
52013269
53013270
54013271
55013272
56013273
57013274
58013275
Ø 59013276
60013277
61013278
62013279
63013280
64013281
65013282
66013283
67013284
68013285
69013286
70013287
71013288
Ø 72013289
73013290
74013291
75013292
76013293
77013294
78013295
79013296
80013297
8013167
9013168
10013169
11013170
12013171
13013172
14013173
15013174
16013175
17013176
19013177
22013178
24013179
27013180
30013181
32013182
36013183
41019312
50019592
7013184
8013185
9013186
10013187
11013188
12013189
13013190
14013191
15013192
16013193
17019110
18013194
20013195
22013196
25013197
28013198
30013199
32013200
35019111
36013201
40017800
Ø 35-37013203
37-39013204
39-41013205
41-43013206
43-45013207
45-47013208
47-49013209
49-51013210
51-53013211
53-55013212
55-57013213
57-59013214
59-61013215
KSZ-MB
Collet chuckCollets DIN 6343
Collets for KSZ-MB 80
Steel collets DIN 6343 series 185 EROUND*
HEXAGONAL**
SQUARE**
Rubberfl ex collets series 52 (recommended for raw part clamping)ROUND
Steel collets DIN 6343 series 193 EROUND*
Further collets are available on request.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
* concentricity according to DIN 6343** concentricity has to be agreed
Collets for KSZ-MB 60
Englisch
238 SMW-AUTOBLOK
KSZ-DZNKSZ-AZNDraw collet chucks
Draw collet chuckfor bar and shaft machining
Application/customer benefi ts
Safe clamping of bars and shafts.
Quick change of collets with changing unit.
Changing unit manual or pneumatic.
Direct mounting of the collets into the body ensures highest concentricity.
Collets available round, square, hexagonal or as blanks to be machined on the chuck.
Available for stationary use.
KSZ-AZN
Rigid axial workstop for shafts.
High axial positioning accuracy of the shafts because of pull down effect onto the workstop.
Full through hole available because of quick change of axial workstop.
Special workstops available on request.
KSZ-DZN
Safe clamping of bars.
No push forces onto the machine spindle during clamping.
Highest axial and radial rigidity with draw collet system.
Parallel clamping of the collets.
Flexible use because of large range of the collets.
KSZ-NZN
Ideal for opposed twin spindle machines.
Collet in axial fixed position = no axial movement and axial forces when clamping.
Rigid axial workstop for shafts.
Full through hole available because of quick change of axial workstop.
Draw collet chuckfor bar and shaft machining/including preparation for air sensing
Chuck in open position = Right end positionThe workstops illustrated in blue (inside or on the front side) are optional and can be delivered on request.
air sensing
Subject to technical changes.For more detailed information please ask for customer drawing.
SMW-AUTOBLOK Type
MountingId. No.
Stroke
max. speed r.p.m.
max. actuating force daN
max. gripping force daN
Weight without collets kg
rec. actuating cylinder Type
Speed r.p.m.
Englisch
SMW-AUTOBLOK 245
SMW-AUTOBLOK 259
6
KSZ-AZL 100
Z 170 194741
A 06 194783
Z 220 195244
A 08 195245
KSZ-AZL 100
194744
Ø 42195081
43195082
44195083
45195084
46195085
47195086
48195087
49195088
50195089
51195090
52195091
53195092
54195093
Ø 55195094
56195095
57195096
58195097
59195098
60195099
61195100
62195101
63195102
64195103
65195104
66195105
67195106
Ø 68195107
69195108
70195109
71195110
72195111
73195112
74195113
75195114
76195115
77195116
78195117
79195118
80195119
Ø 81195120
82195121
83195122
84195123
85195124
86195125
87195126
88195127
89195128
90195129
91195130
92195131
93195132
Ø 94195133
95195134
96195135
97195136
98195137
99195138
100194742
Ø 42195141
43195142
44195143
45195144
46195145
47195146
48195147
49195148
50195149
51195150
52195151
53195152
54195153
Ø 55195154
56195155
57195156
58195157
59195158
60195159
61195160
62195161
63195162
64195163
65195164
66195165
67195166
Ø 68195167
69195168
70195169
71195170
72195171
73195172
74195173
75195174
76195175
77195176
78195177
79195178
80195179
Ø 81195180
82195181
83195182
84195183
85195184
86195185
87195186
88195187
89195188
90194743
91195189
92195190
93195191
Ø 94195192
95195193
96195194
97195195
98195196
99195197
100195198
KSZ-AZL
Ordering review
* concentricity similar DIN 6343
Steel collets with axial and radial groovesROUND*
Steel collets with smooth clamping surfaceROUND*
Collets for KSZ-AZL
SizeAccessories
SizeAccessoriespneumatic
Changing unit
Supply range: Chuck and mounting bolts
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Id. No.
Englisch
246 SMW-AUTOBLOK
GF 80INCH serrationBar pulling chuck
Spring actuated bar pulling chuck
Profi tability
Direct mounting to the turret of the lathe - actuation device is not necessary.
Suitable to all tool mounting systems.
Only one tool place of turret is required.
Simple production of special jaws for special bar profiles.
High flexibility at small quantities.
Simple set-up.
Simple, safe spring pre-loading of jaws.
Hardened/quenched clamping arms ensure long service life.
Application/customer benefi ts
Clamping and positioning of short bar material.
Positioning of shaft type components in automatic production cycle.
Function
Move bar pulling chuck GF onto the workpiece with the turret in Z-axis.
The bar pulling chuck is clamping self actingvia spring pre-loading.