Page 1
Chhattisgarh Swami Vivekanand Technical University, Bhilai
SCHEME OF TEACHING AND EXAMINATION
B.E. VIII SEMESTER MECHATRONICS ENGINEERING
S.
No.
Board of
Study
Sub. Code
SUBJECT
PERIODS
PER WEEK
SCHEME OF
EXAM
Theory/Practical
TOTAL
MARKS
Credit
L+(T+P)/
2
1 Mech. Engg. 337811(37) Robotics 4 1 - 80 20 20 120 5
2 Electronics and
Telecom
367811 (28) Process Control 4 1 - 80 20 20 120 5
3 Mech. Engg. 367812 (37) Mechatronics Systems
Design 4 1 - 80 20 20 120 5
4 Refer Table 3 Professional Elective 3 4 1 - 80 20 20 120 5
5 Refer Table 4 Open Elective – IV 4 1 - 80 20 20 120 5
6 Mech. Engg. 367821 (67) Robotics Lab - - 2 40 - 20 60 1
7 Electronics and
Telecom 367822 (67) Process Control Lab - - 2 40 - 20 60 1
8 Mech. Engg. 367823 (67) Simulation Lab - - 2 40 - 20 60 1
9 Mech. Engg. 367824 (67) Major Project - - 6 100 - 80 180 3
10 Mech. Engg. 300824 (37) Report Writing and
Seminar - - 2 - - 40 40 1
11 Library - - 1 - - - - -
Total 20 5 15 620 100 280 1000 32
L- Lecture T- Tutorial
P- Practical, ESE- End Semester Exam
CT- Class Test TA- Teacher's Assessment
Table – III
Professional Elective- III
S.No. Board of Studies Code Name of Subject
1 Mech. Engg. 337813 (37) Production Management
2 Mech. Engg. 367881 (37) Engg. Materials
3 Mech. Engg. 367882 (37) Product Development
4 Electronics and Telecom 367883 (28) Neural Network & Fuzzy Systems
5 Electronics and Telecom 367884 (28) Programmable Logic Controller
6. Electronics and Telecom 367885 (28) Automotive Electronics
Note : 1/4th of total strength of students subject to Minimum Strength of twenty students is required to offer an
elective in the college in a particular academic session.
Note : Choice of elective course once made for an examination cannot be changed for future examinations.
Page 2
Chhattisgarh Swami Vivekanand Technical University, Bhilai
Table – IV
Open Elective -IV
S.No. Board of Studies Code Name of Subject
1 Management 300881 (36) Enterprise Resource Planning
2 Information Technology 300882 (33) E-Commerce & strategic IT
3 Management 300883 (36) Technology Management
4 Information Technology 300884 (33) Decision Support & Executive Information
System
5 Computer Science & Engg. 300885 (22) Software Technology
6 Management 300886 (36) Knowledge Entrepreneurship
7 Management 300887 (36) Finance Management
8 Management 300888 (36) Project Planning, Management & Evaluation
9 Mechanical Engg. 300889 (37) Safety Engineering
10 Computer Science & Engg. 300890 (22) Bio Informatics
11 Mechanical Engg. 300891 (37) Energy Conservation & Management
12 Nanotechnology 300892 (47) Nanotechnology
13 Management 300893 (36) Intellectual Property Rights
14 Mechanical Engg. 300894 (37) Value Engineering
15 Civil Engg. 300895 (20) Disaster Management
16 Civil Engg. 300896 (20) Construction Management
17 Civil Engg. 300897 (20) Ecology and Sustainable Development
18 Chem. Engg. 300898 (19) Non Conventional Energy Sources
19 Electrical Engg. 300899 (24) Energy Auditing and management
Note (1) – 1/4th of total strength of students subject to minimum of twenty students is required to offer an
elective in the college in a particular academic session.
Note (2) - Choice of elective course once made for an examination cannot be changed in Future examinations.
Page 3
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg. , Mechatronics Engg.
Subject: Robotics Code: 337811 (37)
Total Theory Periods: 50 Total Tutorial Period : 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
UNIT – I
Introduction to Robotics
Evolution of Robots and Robotics, Laws of Robotics, What is and What is not a Robot, Progressive Advancement in
Robots, Robot Anatomy, Human Arm Characteristics, Design and Control Issues, Manipulation and Control,
Sensors and Vision, Programming Robots, The Future Prospects, Notations.
UNIT – II
Coordinate Frames, Mapping and Transforms
Coordinate Frames, Description of Objects in Space, Transformation of Vectors, Inverting a Homogeneous
Transform, Fundamental Rotation Matrices
UNIT – III
Symbolic Modeling of Robots – Direct Kinematic Model
Mechanical Structure and Notations, Description of Links and Joints, Kinematic Modeling of the Manipulator,
Denavit – Hartenberg Notation, Kinematic Relationship between Adjacent Links, Manipulator Transormation
Matrix. Introduction to Inverse Kinematic model
UNIT – IV
Robotic Sensors and Vision
The Meaning of Sensing, Sensors in Robotics, Kinds of Sensors used in Robotics, Robotic vision, Industrial
Applications of Vision-Controlled Robotic Systems, Process of Imaging, Architecture of Robotic Vision Systems,
Image Acquisition, Description of Other components of Vision System, Image Representation, Image Processing.
UNIT – V
Robot Applications
Industrial Applications, Material Handling, Processing Applications, Assembly Applications, Inspection
Application, Principles for Robot Application and Application Planning, Justification of Robots, Robot Safety,
Non-Industrial Applications, Robotic application for sustainable Development.
TEXT BOOKS
1. Robotics & Control – R.K. Mittal & I.J. Nagrath – TMH Publications
2. Robotics for Engineers - Yoram Korean- McGrew Hill Co.
3. Industrial Robotics Technology programming and Applications - M.P.Groover, M.Weiss, R.N.Nagel,
N.G.Odrey
REFERENCE BOOKS
1. Robotics Control Sensing, Vision and Intelligence - K.S.Fu, R.C.Gonzalex, C.S.G.Lee- McGrew hill
Book co.
2. Kinematics and Synthesis of Linkages - Hartenberg and Denavit - McGrew Hill Book Co
3. Kinematics and Linkage Design - A.S. Hall - Prentice Hall
4. Kinematics and Dynamics of Machinery - J.Hirchhorn - McGrew HillBook Company
Page 4
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg. , Mechatronics Engg.
Subject: Process Control Code: 367811 (28)
Total Theory Periods: 40 Total Tutorial Periods: 10
Total Marks in End Semester Examination: 80
Minimum number of Class tests to be conducted: Two
UNIT – I : Introduction to Process control & process characteristics
Types of processes, process characteristics and controllability, step analysis method of finding time constant, self
regulating and nonself regulating. Processes, interacting & non-interacting processes.
Unit II: Basic Control Actions
Characteristics of on-off, proportional, single -speed floating control, integral and derivative modes – composite
control modes - PI, PD and PID control modes - Response of controllers for different types of test inputs – Integral
wind up - Auto - manual transfer - Selection of control mode for different processes - Typical control schemes for
level, flow, pressure and temperature.
Unit III: Process Dynamics
Elements of process control - process variables - degrees of freedom - Characteristics of liquid system, gas system,
thermal system - Mathematical model of liquid process, gas process, flow process, thermal process, mixing process -
Batch process and continuous process - Self regulation.
UNIT – IV : Process Control
Multiloop & multivariable process control systems, Feedback control, feed forward control, Cascade control, ratio
control, auto selective control, adaptive control system, Coupling & decoupling control system, scaling the
instruments. Analysis of flow, level, temperature loops.
UNIT – V : Applications of Process Control
Boiler Control: Combustion control, Air to fuel ratio control, 3-element drum level control, steam pressure, temp
control, burner management and control, safely interlocks. Furnace control, FB-FF-CS of heat exchanger,
Evaporator control.
Distillation column control: Flow control of distillate and bottoms products, reflux control, composition control,
pressure & Temperature control. Reactor control:- Flow, temp, Pressure, endpoint controls , Reactor safety
interlocks. Dryer control, pumps & compressor control, cooling Tower control, water treatment control.
Text Books : 1. Eckman, D.P., “ Automatic Process Control” , Wiley Eastern,1985.
2. Patranabis, D.,: “ Principles of Process Control”, TMH 1981.
Reference Books:
1. Process Instrumentation & Control Handbook by Considine .
2. Process Control Handbook by Bela G. Liptak
3. Process Control System 3/e by F.G.Shinskey, McGraw Hill.
4. Curtis Johnson, D., “ Process Control Instrumentation Technology” , Prentice Hall Of India,1996.
5. Peter Harriot.,: “Process Control” , TMH
6. Coughanoner, and Koppel., : “ Process Systems Analysis and Control” , TMH 1991.
Page 5
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg. , Mechatronics Engg.
Subject: Mechatronics System Design Code: 367812 (37)
Total Theory Periods: 40 Total Tutorial Period: 10
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
UNIT I
Mechanical systems and design:
Mechatronic approach – Control, program control, adaptive control and distributed systems – Design process –
Types of Design – Integrated product design – Mechanisms, load conditions, design and Specialisation
Mechatronics Mechanical flexibility – Structures, load conditions, flexibility and environmental isolation – Man
machine interface, industrial design and ergonomics, information transfer from machine to man and to machine,
safety.
UNIT II
Motion control:
Control devices – Electro hydraulic control devices – Electro pneumatic proportional controls – Control of electrical
drives – Basics of Magnetic circuits – Linear systems – Pneumatic ram – Hydraulic cylinder – Direct linear
electrical actuators – Solenoids – Pneumatic motors- continuous and limited rotation – Hydraulic Motors:
continuous and limited rotation – Brushless DC Motors – Hydraulic circuits and Pneumatic Circuits.
UNIT III
Advanced applications:
Sensor for condition monitoring - Mechanical control in automated manufacturing – Artificial Intelligence and
Fuzzy – Micro sensors application and real time interfacing - Elements of Data acquisition and control - Overview
of Input/Output process.
UNIT IV
Virtual Instrumentation:
Functional description of a digital instrument- Block diagram of a virtual instrument- Architecture of virtual
instruments - advantages of virtual instruments-Hardware and software- Basics of LabVIEW, For and while loops,
structures, Arrays and clusters, graphs and charts, String handling, Basics of data acquisition, Data acquisition with
LabVIEW, Interfacing Instruments:GPIB,RS232.
UNIT V
Case Studies:
Testing of transportation bridge surface materials- Rotary optical encoder-controlling temperature of a hot/cold
reservoir-pH control system-Design of a coin counter-design of a robotic walking machine-skip and control of a CD
player, strain gauge weighing system.
Text Books:
1. Bolton, “Mechatronics – Electronic Control Systems in Mechanical and Electrical Engineering”, Second Edition,
Addison Wesley Longman Ltd., 1999.
2. Devdas Shetty, Richard A.Kolk, “Mechatronic System Design”, PWS Publishing Company, 1997.
3. Sanjay Gupta, Joseph John,“Virtual Instrumentation using LabVIEW”, Tata McGraw Hill,2005.
Reference Books:
1. Bradley D.Dawson, Burd, N.C. and Loader, A.J., “Mechatronics: Electronics in Products and Processes”,
Chapman and Hall, London, 1991
2. Brian Morriss, “Automated Manufacturing Systems - Actuators, Controls, Sensors and Robotics”, Mc Graw Hill
International Edition, 1995
3. Burford Furman. Dave Pinkernell and Steve Elgee, “Case Studies on Design of Mechatronic Products”. IEEE
Transactions on Components, Packaging and Manufacturing Technology – Part C, Vol 20. No.1. Jan .1997.
Page 6
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg. , Mechatronics Engg.
Subject: Production Management Code: 337813 (37)
Total Theory Periods: 50 Total Tutorial Period : 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
UNIT-I
Production Management
Definition, objectives, scope, benefits, functions of production management, place of production management in an
organization, types of production system, Product life cycle, product design and development, production cycle.
Costing and Cost Analysis
Elements of costs, Break even analysis, Incremental costs, make or buy decision.
UNIT-II
Sales Forecasting
Purposes, methods – Delphi, linear regression, economic indicators, time-series analysis, adjustment for seasonal
variations, moving average, exponential smoothing.
UNIT-III
Production Planning and Control
Functions, Organization, Master Scheduling, Aggregate planning and strategies ,Materials requirement planning,
product structure tree, Routing, Loading Scheduling – forward and backward, Dispatching – priority rules,
Sequencing, Johnson‟s algorithm for n jobs and two machines, Gantt‟s chart, Bar chart, Flow process chart.
Materials Handling
Principles of materials handling, unit load, Types of materials handling equipment, Relation between materials
handling and plant layout.
UNIT - IV
Material Management
Objectives and functions of materials management, Organization of materials management.
Procurement
Objectives of purchase deptt. purchase responsibilities and organization, types of purchasing, purchase procedures,
Import and Export.
Stores Keeping
Stores management, functions of stores, classification of materials, standardization of materials, identification and
maintenance of layout of stores, physical control of materials, pricing of stores, issuing of stores.
Inventory Control
Objective, scope and functions of inventory control, inventory control techniques, economic ordering quantity,
periodic ordering quantity, A.B.C. analysis, General idea regarding inventory control under risk and uncertainty.
UNIT – V
Quality Control
Difference between inspection and quality control, acceptance sampling, procedure‟s risk and consumer‟s risk,
operating characteristic curve for single sampling plan, AOQL
Quality of conformance, quality of design, economics of quality, SQC charts for variables and attributes.
Introduction toJIT manufacturing, kanban system.
TEXT BOOKS
1. Production and operation Management – By P. Ramamurty – New Age International Pub., 2005
2. Production and operation Management – By R. Mayer – TMH
3. Quality Planning and Analysis, Juran and Gryna
REFERENCE BOOKS
1. Industrial Engineering & Production Management – Martand Telsang – S. Chand & Co., 2004
2. Production and operations Management by – Adam and Ebert – PHI – 6th Edn., 2003
3. Production planning and Control – By Samuel Eilon, Navneet Prakashan Ltd., Bombay
Page 7
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg. , Mechatronics Engg
Sub : Engineering Materials Code : 367881 (37)
Total Theory Periods : 40 Total Tutorial Periods : 10
Total Marks in End Semester Exam : 80
Minimum number of class tests to be conducted : 02
UNIT – I
a) Engineering Materials:
Selection of materials based on properties, cost, availability, appearance, service life and recycling, Mechanisms of
strengthening in metals – strengthening by grain reduction, solid solution strengthening, strain hardening, failure
mechanism fracture – Ductile, Brittle, Griffith theory of brittle fracture, methods of fracture protection, fatigue,
creep.
b) Modern methods for materials studies:
Optical Microscopy, Electron Microscopy, Chemical Analysis using atomic absorption spectroscopy, photo
electron spectroscope, magnetic response, Moss Bayer spectroscopy, non destructive testing (NDT)
UNIT – II
a) Iron & Steel
Iron, steel, classification, designation of Iron & Steel, properties and applications of steels, alloy steels, effect of
alloying element, functions and uses of alloying elements, typical examples of alloy stress, stainless steel – types,
properties, corrosion, resistance, selection, failure, tool steel, structural steels, HSLA steel, Heat treatment of iron &
steel.
b) Non Ferrous metals and alloys
Copper – properties of copper, uses of copper
Copper alloys – properties and uses of brasses and bronzes
Aluminum – Aluminum castings, wrought Aluminum alloy, application of Aluminum and its alloys.
Magnesium – Application of Magnesium and its allo9ys
Titanium – Titanium and its alloys
Lead, Tin and Nickel
Heat treatment of non ferrous metal & alloys
UNIT – III
Polymers:
The structure of polymers, thermoplastics, thermos setting plastics, additives in plastics, properties and applications
of thermo plastics, thermo setting plastics, biodegradable plastics, elastomers (rubber)
UNIT – IV
Ceramics and Composites:
a) Ceramics: Ceramics and non ceramic phases, classification of ceramics, the structure of ceramics, properties and
application of ceramics, glass, glass ceramics, graphite, diamond.
b) Composite: Introduction, particle reinforced composite, fiber reinforced composite, structural composite, other
composites, their structure, properties and applications.
UNIT – V
Miscellaneous Materials
a) Dielectric Material: Basic concept, frequency and temperature dependencies, energy loss, requirement of
insulating materials, insulating materials and their application.
Page 8
b) Magnetic Materials: Ferro magnetic anisotropy, hard and soft magnetic materials, application of soft and hard
magnetic material.
c) Super Conductivity: Experimental results, theoretical approaches, flux quantization, electron tunneling, application
of super conducting
d) Semi Conductors: Energy band concept, Intrinsic and Extrinsic semiconductors, mechanism of current conductors,
materials for semiconductors, application of semi conducting materials.
e) Materials for Nuclear and space applications
TEXT BOOKS
1. Science of Engineering Materials – C.M. Shrivastava and C. Srinivasan – New Age Publishers, New Delhi (1997)
2. Advances in Material Science for Engineers and Technologists – Dr. R.K. Dongre, Dr. A.K. Sharma – S.K. Kataria
& Sons, New Delhi (2001)
REFERENCES
1. Elements of Material Science and Engineering – Lawrence H. Van Vlack - Addison Wesley Publishing Company
2. Modern Materials and Manufacturing Processes – R.G. Bruce, W.K. Dalton, J.E. Neely, R.R. Kibbe, Pearson -
Prentice Hall of India
3. Manufacturing Engineering and Technology – S. Kalpakjjan, S.K. Schmid – 4th
Edition – Pearson Education, Asia
Page 9
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg.
Subject: Product Development Code: 367882 (37)
Total Theory Periods: 50 Total Tutorial Period: 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
UNIT-I
Product Development Process
Background for design, design theory ,design materials, human factors in design applied ergonomics, product
development processes and organization, identifying customer needs, establishing product specifications..
UNIT-II
Product Design Methods
Concept generation ,selection of a concept, Testing of concept, Physical reliability & Economic feasibility of design
concepts, product architecture, Creative and rational clarifying objectives- the objective trees methods, establishing
functions – the function analysis methods, setting requirement- requirements specification methods determining
characteristics – the QFD method, generating alternatives-the morphological chart method, evaluating alternatives-
the weighted objectives methods, improving details-the value engineering method and design strategies.
UNIT –III
Design for Manufacture
Estimating manufacturing costs, reducing component, assembly and support cost design for assembly, design for
disassembly, design for environment, design for graphics and packaging, effective prototyping – principle and
planning.
UNIT –IV
Industrial Design
Its need - Ergonomic needs, Aesthetic needs, impact, accessing the quality, steps involved in Industrial design
process, Management of Technology & user driven products, Technological Forecasting
UNIT – V
Patents, Product Development & Project Management
Legal issues in product design, trademarks, trade-secret, copy rights, patents – types, steps for disclosure, design
resources, economics – quantitative & qualitative analysis, management of product development projects, Design
Structure Matrix, Gantt Chart, Project schedule, budget, risk plan, accelerating project, execution, assessing and
correction, Intellectual property rights.
TEXT BOOKS
1. Karl. T. Ulrich and Steven D. Eppinger “Product Design & Development” – TMH – 3rd addition
2. Kevin Otto and Kristin wood “Product Design” –Pearson Education
3. Chitale & Gupta, “Product Development”, Tata McGraw Hill.
REFERENCE BOOKS
1. Monks, J.G, “Operations Management”, McGraw Hill, 1977
2. Francis, R. L., and White, J. A., “Facility Layout and Location”, Prentice Hall of India, 1974
3. Imad Moustapha “Concurrent Engineering in Product Design and Development” – New Age International
Publishers
Page 10
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg.
Subject: Neural network & Fuzzy Systems (Elective – III) Code: 367883 (28)
Total Theory Periods: 40 Total Tutorial Periods: 10
Total Marks in End Semester Examination: 80
Minimum number of Class tests to be conducted: Two
UNIT – I: Introduction and different architectures of neural networks :
Artificial neuron - MLP – Back propagation –Hope field networks – Kohonen self organizing maps – adaptive
resonance theory.
UNIT – II: Neural network for controls
Schemes of neuro-control –Identification and control of dynamics systems – adaptive neuro controllers –case study.
UNIT – III: Introduction to fuzzy logic.
Fuzzy sets – fuzzy relations – fuzzy conditional statements – fuzzy rules – fuzzy algorithm.
UNIT – IV: Fuzzy logic control system
Fuzzy logic controller – fuzzification interface- knowledge base- decision making logic – Defuzzification interface –
decision of fuzzy logic controller – case study.
UNIT – V: Neuro Fuzzy logic control
Optimization of membership function and rules base of fuzzy logic controller using neural networks –generic
algorithm – Fuzzy neuron – Adaptive Fuzzy systems – case study.
List of Text Books:
1. Kosko B, “ Neural Networks & Fuzzy Systems”
2. Milion W.T., Sutton R.S. &Webrose P.J. , “ Neural network for controls” MIT Press.
List of Reference Books:
1. Zimmermann H.J. , Fuzzy set theory & Applications , Allied Publications
2. Laurance Fausett, Fundamentals of Neural Networks, Prentice Hall
3. Rolstan D.W., “Principles of Artificial and Expert systems Development”, McGraw Hill Book Company.
4. Tsoukalas L.H. & Robert Uhrig,“ Fuzzy & Neural Approach in Engineering " John Wiley & Sons.
5. Klir G.J. & Yuan B.B. ,“ Fuzzy sets & Fuzzy logic” Prentice Hall of India
Page 11
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg.
Subject: Programmable Logic Controller (Elective – III) Code: 367884 (28)
Total Theory Periods: 40 Total Tutorial Periods: 10
Total Marks in End Semester Examination: 80
Minimum number of Class tests to be conducted: Two
UNIT I
Programmable Logic: Introduction, programmable Logic structures Programmable Logic Arrays (PLAs),
Programmable Array Logic (PALs), Programmable Gate Arrays (PGAs), Field Programmable Gate Arrays (FPGAs)
Sequential network design with Programmable Logic Devices (PLDs) Design of sequential networks using ROMs
and PLAs Traffic light controller using PAL.
UNIT II
Programmable Logic Controllers (PLCs): Introduction Parts of PLC Principles of operation PLC sizes PLC
hardware components I/O section Analog I/O section Analog I/O modules, digital I/O modules CPU. Processor
memory module Programming devices Diagnostics of PLCs with Computers.
UNIT III
PLC programming: Simple instructions Programming EXAMINE ON and EXAMINE OFF instructions
Electromagnetic control relays Motor starters Manually operated switches Mechanically operated and Proximity
switches Output control devices Latching relays PLC ladder diagram Converting simple relay ladder diagram in to
PLC relay ladder diagram.
UNIT IV
Timer: Instructions ON DELAY timer and OFF DELAY timer counter instructions Up/Down counters Timer and
Counter applications program control instructions Data manipulating instructions math instructions.
UNIT V
Applications of PLC: Simple materials handling applications Automatic control of warehouse door Automatic
lubricating oil supplier Conveyor belt motor control Automatic car washing machine Bottle label detection. Process
control application.
List of Text Books:
1. Charles H. Roth, Jr " Fundamentals of Logic Design ", Fourth Edition, Jaico Publishing House.
2. Frank D. Petruzella " Programmable Logic Controllers ", McGraw- Hill book, company.
List of Reference Books:
1. William I. Fletcher " An Engineering Approach to Digital Design ", Prentice, Hall of India Ltd.
2. Programmable Logic Controllers: Principles & Applications, Webb & Reis, Prentice Hall of India.
3. Programmable Logic Control: Principles & Applications, NIIT, Prentice Hall of India.
4. Siemens " PLC Handbook ".
Page 12
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: VIII Branch: Mechatronics
Subject: Automotive Electronics (Elective – III) Code: 367885 (37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Total Marks in End Semester Examination: 80
Minimum number of Class tests to be conducted: Two
UNIT I Introduction: Automotive component operation Electrical wiring terminals and switching Multiplexed wiring
systems Circuit diagrams and symbols. Charging Systems and Starting Systems: Charging systems principles
alternations and charging circuits. New developments requirements of the starting system. Basic starting circuit.
UNIT II Ignition systems: Ignition fundamental, Electronic ignition systems. Programmed ignition distribution less ignition
direct ignition spark plugs. Electronic Fuel Control : Basics of combusion Engine fuelling and exhaust emissions
Electronic control of carburation Petrol fuel injection Diesel fuel injection.
UNIT III Instrumentation Systems: Introduction to instrumentation systems Various sensors used for different parameters
sensing Driver instrumentation systems vehicle condition monitoring trip computer different types of visual display
UNIT IV Electronic control of braking and traction: Introduction and discription control elements and control
methodology Electronic control of Automatic Transmission: Introduction and description Control of gear shift and
torque converter lockup Electric power steering Electronic clutch.
UNIT V Engine Management Systems: Combined ignition and fuel management systems Exhaust emission control Digital
control techniques Complete vehicle control systems Artificial intelligence and engine management Automotive
Microprocessor uses.
Lighting and Security Systems: Vehicles lighting Circuits Signaling Circuit Central locking and electric
windows security systems Airbags and seat belt tensioners Miscellaneous safety and comfort systems
List of Text Books:
1. Tom Denton, Automobile Electrical and Electronic Systems, Edward Arnold Pub.
2. Young A.P. & Griffiths, “ Automotive Electrical Equipment” , ELBS & New Press.
List of Reference Books:
1. Don Knowels, Automotive Electronic and Computer controlled Ignition Systems, Prentice Hall
2. William, T.M., Automotive Mechanics, McGraw Hill Book Co.,
3. Ronald K Jurgen, Automotive Electronics Handbook, McGraw Hill, Inc.
4. William B. Riddens, “Understanding Automotive Electronics”, 5th Edition, Butterworth Hennimann
Woburn‟
5. Crouse W.H., “ Automobile Electrical Equipment” , Mc Graw Hill Co. Inc.
6. Bechhold, “ Understanding Automotive Electronic”, SAE.
7. Robert Bosch,” Automotive Hand Book”, SAE (5TH Edition).
Page 13
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg., Mechatronics Engg.
Subject: Robotics Lab Code: 367821 (67)
Total Practical Periods: 28
Total Marks in End Semester Exam: 40
EXPERIMENTS TO BE PERFORMED (MINIMUM FIVE NUMBERS)
1. To detect the sensor scanning system to overcome limitation of fixed sensors on various robotic
applications, ultrasonic sensor, laser range finders, infrared detectors and miniature.
2. To find the horizontal and vertical movement up to 180o in either direction.
3. To detect objects with infrared ray detector.
4. To determine object distance (3cm – 300cm).
5. To detect distance (10cm to 80 cm) with infrared object detector.
6. To determine 5 Axis Robotic Arm movement and its degree of rotation.
7. To lift the object and place 100m away in various directions.
8. To find the gripper movement ( 0 to 50mm).
9. To study various Robotic Arm Configurations.
10. To study Pick and Place Robot
LIST OF EQUIPMENTS/MACHINES REQUIRED
1. 5 Axis Robotic Arm System
2. Hex Crawler Robot. The Mechatronics Robot
3. Ultrasonic Range Finder
4. Servo Power Supply
5. Infrared Object/Distance Detector
6. A 7.2V Battery Charger
7. Blue Tooth Transducer
8. Blue Tooth Pc Adaptor
9. Various Wooden Models to study Robotic Arm Configuration
10. Working model of Pick and Place Robot
Page 14
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: B.E. VIII Sem. Branch: Mechanical Engg.
Subject: Process Control Lab Code: 367822 (67)
Total Practical Periods: 24
Total Marks in End Semester Examination: 40
List of Experiments to be performed: (at least 12 experiments are to be performed out of the following list)
1. On-Off Controller with and without neutral zone
2. Controller tuning using continuous cycling methods
3. Controller tuning using Process Reaction Curve
4. Study of P, I, D, PI, PD and PID Controller for : Temperature, Pressure, Flow and Level control system
5. Calibrations and tuning of a PID controllers.
6. Test and find the characteristics of a given control valve.
7. To study the auto tuning PID controller using virtual instrumentation (LABVIEW) based DAQ.
8. To maintain the constant pressure of a process (Pressure) tank using Auto PID in LABVIEW.
9. To study the closed loop operation of the Temperature Process control using Auto PID controller with
LABVIEW. Also To find the Kc and Ti value of the PID controller for a particular set point.
10. Study of a typical Temperature Control Loop having Furnace, suitable final control element,
SMART/Analog temperature transmitter (hand held communicator for SMART Transmitter), PID
controller, and data logger etc.
11. Study of a typical Pressure Control Loop having Pressure source, Pneumatic control valve, I to P
Converter, Compressor, SMART/Analog pressure transmitter, and PID controller etc.
12. Study of a typical Flow Control Loop having SMART/Analog DP/Mass Flow meter, Motorized /
Pneumatic control valve (I to P Converter and Compressor for pneumatic control valve), and PID controller
etc.
13. Study of a typical Level Control Loop having Ultra Sonic/ Capacitor Level Transmitter, Motorized /
Pneumatic control valve (I to P Converter and Compressor for pneumatic control valve), and PID controller
etc.
14. Study of a typical Duct Air Flow monitoring and Control.
15. PLC Programming through PC
16. Study of a PC based Simulation Software i.e. simulation of boiler of a power plant etc.
17. Study of flow/temperature control loop with DCS
List of Instruments:
All sorts of transducers with kits, Discrete components like OPAMP, Resistor & Capacitors, Voltage source,
Function generator, CRO, Models of Process Control, NI-LabView, MATLAB with SIMULINK
Reference Book:
Handbook of Instrumentation, Liptak
Page 15
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: VIII Branch: Mechatronics
Subject: Simulation Lab Code: 367823 (67)
Total Practical Periods: 28
Total Marks in End Semester Examination: 40
Experiments to be performed:
To Design, implement and Simulate Fixed bias and self bias transistorized circuit for determining the bandwidth
To Design, implement and Simulate Fixed bias and self bias for studying the low frequency and high frequency effect.
To Design, implement and Simulate Miller integrator for determining the nonlinearities.
To Design, implement and simulate current Sweep generator for determining the nonlinearities.
To Design, implement and Simulate Inverting and non inverting amplifier for determining the bandwidth
To Design, implement and Simulate Integrator & differentiator for studying output responses for different inputs.
To Design, implement and Simulate zero crossing detector & comparator for studying output responses for
different inputs.
To Design, implement and Simulate Series Voltage regulator.
To Design, implement and Simulate 1 st & 2nd order LPF for determining the bandwidth and studying output
responses for different inputs.
To Design, implement and Simulate 1 st & 2 nd order HPF for determining the bandwidth
To Design, implement and Simulate Half ware & Full ware rectifier way op-Amp for determining the
bandwidth.
To Design, implement and Simulate Series and Shunt Clipper for studying output responses
To Design, implement and Simulate Clamping circuit for studying output responses for different inputs
To Design, implement and Simulate Clamping Circuit with op-Amp for studying output responses for
different inputs.
To Design, implement and Simulate Instrumentation Amplifier using three op-Amp for determining the
bandwidth
To Design, implement and Simulate Monostable & Astable using 555 timer
To Design, implement and Simulate R -2R ladder type Digital to analog converter
To Design, implement and Simulate Flash type Analog to digital
List of Equipments/Machine Required:
Desktop PCs, Simulation Software for Analog Circuits like MULTISIM, PSPICE etc.
Recommended Books:
1. Experiments and SPICE Simulations in Analog Electronics Laboratory, Maheswari & Anand, PHI
2. Manuals of MUSLTISIM
3. Manuals of PSPICE
Page 16
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C G)
Semester: BE VIII Branch: Mechanical Engg., Mechatronics Engg.
Subject: Report Writing & Seminar Code: 300824 (37)
Total No. of periods: 2 per week Total Tutorial Periods : Nil
Total marks in End Semester Exam: Nil Teacher's Assessment: 40 marks
Minimum Number of class test to be conducted: 2
Unit -I
Introduction to Technical Writing: how differs from other types of written communication Purpose of technical
writing, Correspondence: prewriting, writing and rewriting Objectives of Technical Writing. Audience Recognition:
High-tech audience, Low tech audience, Lay audience, Multiple Audience.
Unit - II
Correspondence: Memos, Letters, E-mails, Its differentiation, types of letters, Document Design, its importance,
Electronic Communication: Internet, Intranet, extranet, Writing effective e-mail.
Unit - III
Summary: Report Strategies, Effective style of technical report writing: Structures: content, introduction,
conclusions, references, etc., Presentation, Writing first draft, revising first draft, diagrams, graphs, tables, etc. report
lay-out.
Unit -IV
Report Writing: Criteria for report writing, Types of Report: Trip report, Progress report, lab report, Feasibility
report, project report, incident report, etc. Case Studies.
Unit -V
Proposals & Presentation: Title page, Cover letter, Table of Content, list of illustrations, summary,discussion,
conclusion, references, glossary, appendix, Case Studies. Oral Presentation/ Seminar:
Text Books:
1. Sharon J. Gerson & Steven M. Gerson "Technical Writing - Process& Product", Pearson
Education.
Reference Books:
1. Sunita Mishra, "Communication Skills for Engineers" Pearson Education
2. Davies J.W. "Communication for engineering students", Longman
3. Eisenberg, "Effective Technical Communication", Mc. Graw Hill
Page 17
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL
UNIVERSITY, BHILAI (C.G.) Semester: VIII Branch : Common to All Branches
Subject :Enterprise Resource Planning Code : 300881 (36)
Total Theory Periods : 40 Total Tut Periods : 10
Total Marks in End Semester Exam : 80
Minimum no. of class tests to be conducted : 2
UNIT-l
Conceptual foundation of Business Process reengineering: Role of information Technology and BPR; Process
improvement and Process redesign, Process identification and mapping; Role/Activity diagrams, Process Visioning,
and benchmarking.
[No of Periods: 8 + 2]
UNIT -2
Enterprise Resource Planning: Evolution of ERP- MRP and MRP II, structure of ERP- two tier architecture, three
tier architecture, Electronic data processing, management information system, Executive information system, ERP
as an integrator of information needs at various Levels.
[No of Periods: 8
+ 2]
UNIT -3
Typical Business Processes: Core processes, Product control, Sales order processing, Purchases, Administrative
processes, Human resource, Finance support processes, Marketing, Strategic planning, Research and development,
Problems in traditional view.
[No of Periods: 8 + 2]
UNIT -4
ERP models/functionality: Sales order processing, Production scheduling, forecasting, distribution, finance,
features of each of the models, description of data flow across each module, overview of supporting databases &
packages.
[No of Periods: 8 + 2]
UNIT -5
ERP implementation issues: Opportunities and problems in ERP selection, and implementation; ERP
implementation: identifying ERP benefits, team formation, Consultant intervention, Selection of ERP, Process of
ERP.
[No of Periods: 8 + 2]
Books: 1. V.K. GARG & N .K. VENKATKRISHNAN:, ERP, Concepts and Practices, PM
2. Rahul V. Altekar, Enterprise wide Resource Planning-theory and practice, PHI
References:
1. ALEXIS LEON: Enterprise Resource Planning, TMH
2. S. SADAGOPAN: MIS, PM
3. V. RAJARAMAN: Analysis and Design of Information Systems, PHI
4. MONK' & BRADY: Concepts in ERP, Vikas pub, Thomson
Page 18
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY
BHILAI (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: E-Commerce and Strategic IT Code:300882 (33)
Total Theory Periods: 50 Total Tutorial Periods: Nil
Total Marks in End Semester Exam: 80.
Minimum number of class tests to be conducted: 02
UNIT – I Introduction: What is E-Commerce, Forces behind E-Commerce, E-Commerce Industry
Framework, and Brief History of E-Commerce. Inter Organizational E-Commerce, Intra Organizational
E-Commerce, and Consumer to Business Electronic Commerce, Architectural framework
Unit – II
Network Infrastructure : LAN, Ethernet(IEEE standard 802.3) LAN , WAN , Internet, TCP/IP Reference
Model, Domain Name Server , Internet Industry Structure,
UNIT – III
Electronic payment systems, types of electronic payment systems, digital token-based electronic payment
systems, smart cards & electronic payment systems, credit card based electronic payment systems, risk
and electronic payment systems, designing electronic payment systems.
UNIT – IV
Information Distribution and Messaging: FTP,E-Mail,WWW server,HTTP, Web service implementation,
Information publishing , Web Browsers, HTML, Common Gateway Interface
UNIT – V Mobile & wireless computing fundamentals, mobile computing framework, wireless delivery
technology and switching methods, mobile information access devices, mobile data internetworking
standards, cellular data communication protocols, mobile computing applications, personal
communication service.
BOOKS :
1. Frontiers of E-commerce by Kalakota & Whinston (Addison-wesley) E-business roadmap for
success by Dr. Ravi Kalakota & Marcia Robinson ( addision wesicy)
2. Electronic Commerce By Bharat Bhasker (TMH)
Page 19
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL
UNIVERSITY, BHILAI (C.G.)
Semester: VIII Branch: Common to All Branches
Subject Name: Technology Management Subject Code: 300883 (36)
Total Theory periods: 40 Total Tutorial periods: 10
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 02
Unit I
Technology: - Definitions, Types and Characteristics, Management of Technology (MOT), Technological
Environment, Parameters of Technological Environment; Science & Technology in India.
[No of Periods: 8 + 2]
Unit II
Innovation Management: - Invention v/s Innovation, Definition and components of innovation. Types of
innovations: Product, Process and system innovations, Understanding Innovation Process.
[No of Periods: 8+ 2]
Unit III
Technology life cycle, Technology evolution and S-curves of Technology Evolution, Technology
Diffusion, Dynamics of Diffusion, Mechanism of Diffusion.
[No of Periods: 8 + 2]
Unit IV
Technology strategies & Intelligence: Technology Strategy & types, Models for technology strategy
formulation Definition of Technology Intelligence, Technology Audit, Process of Technology
Intelligence: Technology Scanning, Monitoring, Forecasting and Assessment.
[No of Periods: 8 + 2]
Unit V
Acquisition and technology transfer. Over view of - GATT, Intellectual property rights (IPR)
[No of Periods: 8 + 2]
Texts Books:
1. V. K. Narayanan, “Managing Technology and Innovation for competitive advantage”, Pearson
Education.
2. Tarek Khalil, “Management of Technology”, McGraw Hill.
Reference Books:
1. Lowell Steele, “Managing Technology”, McGraw Hill.
2. R. A. Burgelman and M. A. Maidique, “Strategic Management of Technology and Innovation”,
Irwin.
3. Plsek, Crativity, Innovation and Quality, PHI
Page 20
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY,
BHILAI (C.G.)
Semester: VIII Branch: Common to all Branches
Subject: Decision Support and Executive Information System Code: 300884(33)
Total Theory Periods: 50 Total Tut Periods: Nil.
Total Marks in End Semester Exam: 80.
Minimum number of class tests to be conducted: 02.
UNIT-I Decision Support System:
What is a DSS, Decision Making Rational Decisions, Definitions of Rationality, Bounded Rationality
and Muddling Through, The Nature of Managers, Appropriate Data Support, Information Processing
Models, Group Decision Making?
UNIT-II Component OF DSS:
Data Component : Information and its Usefulness, Characteristics of Information, Databases to Support
Decision Making, Database Management Systems, Data Warehouses, Data Mining and Intelligent Agents
Model Component-:Models Representation Methodology, TimeModel Based ManagementSystems,
Access to Models Understandability of Results, Integrating Models Sensitivity of aDecision,
Brainstorming and Alternative Generation, Evaluating Alternatives, Running External Models.
Mail Component: Integration of Mail Management Examples of Use implications for DSS.
Unit-III Intelligence and Decision Support Systems:
Programming Reasoning, Backward Chaining Reasoning, Forward Chaining Reasoning, Comparison,
Certainty Factors,User-Interface Component:User Interface Components, The Action Language, Menus,
Command Language, I/O Structured Formats, Free Form Natural Language, The Display or Presentation
Language, Windowing Representations, Perceived Ownership of Analyses, Graphs and Bias Support for
All Phases of Decision Making, The Knowledge Base Modes of Communication
Unit-IV Designing A DSS:Planning for DSS, Designing a Specific DSS, Interviewing Techniques,
OtherTechniques, Situational AnalysisDesign Approaches, Systems Built from Scratch,
Using Technology to Form the Basis of the DSS, Evaluating a DSS Generator, Using a DSS
Generator,The Design Team, DSS Design and Re-engineering Discussion .
Unit-V Implementation and Evaluation of DSS : Implementation Strategy , Prototypes, Interviewing ,
User Involvement , Commitment to Change, Managing Change, Institutionalize System, Implementation
and System Evaluation, Technical Appropriateness, Measurement Challenges , Organizational
Appropriateness.
Name Of Text Books-:
Decision Support System By Vicki l Sauter
Management Information system-Gerald V. Post & David L. Anderson
Page 21
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY,
BHILAI (C.G.)
Semester: VIII Branch: Common to All Branches.
Subject: Software Technology Code: 300885 (22)
Total Theory Periods: 4 per week. Total Tut Periods: Nil.
Total Marks in End Semester Exam: 80.
Minimum number of class tests to be conducted: 02.
UNIT-1 ASSEMBLY LANGUAGE PROGRAMMING
Pentium Assembly languages-Registers, Memory Model, Addressing mode, 1source Link, Installation,
Assembler Directives.
ASSEMBLER DESIGN
Simple manual Assembler, Assembler Design Process, Load and Go Assembler, Object File Formats.
UNIT-2 LINKERS
Linking -Combining Object Modules, Pass I, Pass II; Library Linking; Position Independent Code (PIC);
Shared Library Linking.
LOADERS- Binary Image; Types of Loaders.
UNIT 3 MACROPROCESSORS
Macro in NASM- Local Labels in Macro Body, Nested Macros.; Design of Macroprocessors – Major
Data Structures, Macroprocessing Technique, Simple macroprocessors without nesting, Nested calls &
definitions
UNIT – 4 COMPILERS
Lexical Analysis; Syntax Analysis; Intermediate Code Generation; Target Code Generation; Optimizing
Transformation
UNIT – 5 TEXT EDITORS
Design of a Text Editor ; Data Structures for Text Sequences; Text Document Design; Text view Design
DEBUGGER
Features; Breakpoint mechanism; Hardware support; context of Debugger; Check pointing & reverse
Execution
Textbooks
1. SYSTEM SOFTWARE by Santanu Chattopadhyay ; Prentice Hall of India
2. Software Engineering By Roger S Pressman ; Mc-Graw Hill
References
1. Foundations of Software Technology and Theoretical Computer Science, By V. (Venkatesh) Raman:
Springer
2. Software Visualization by John Stasko; MIT press
3. Software Engineering By Rajib Mall : PHI
Page 22
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY,
BHILAI (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Knowledge Entrepreneurship Code: 300886 (36)
Total Theory Periods: 40 Total Tut Periods: 12
Total Marks in End Semester Exam:80
Minimum no. of class tests to be conducted: 2
Unit – I
Introduction: Entrepreneurship in Knowledge economy, abundant & accessible information, implication,
impact & consequence, knowledge based opportunities, aims, scope, and objectives.
Unit-II
Managing knowledge & intellectual capital:
Knowledge management, loss of knowledge, knowledge implementation, knowledge creation, property
intellectual capital.
Unit-III
Contemporary information problems:
Information overload, winning & losing barrier to entry, emerging issues, customers, investors, myth of
inevitable program.
Unit-IV
Creating enterprise cultures:
Working with employer, organizing for entrepreneurship, unity & diversity, ten essential freedoms,
freedom of operation, effective issue monitoring, establish search criteria.
Unit-V
Becoming a knowledge entrepreneur:
Entrepreneur qualities, knowledge entrepreneur, challenge of launching new product, creating launch
support tool, examples of best practice.
Text & Reference Books
Amrit Tiwana ,The Knowledge Management tool kit, Pearson Education.
Lunlin Conlson, Knowledge Entrepreneur, Thomas Press.
Catheriue L Mann, Knowledge entrepreneurship, Oxford
Heinke Robkern ,Knowledge entrepreneurship,.
Bonnie Montano,Knowledge Management, , IRM Press, Londan
Page 23
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY BHILAI (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Financial Management Code: 300887(36)
Total Theory Periods: 3 Total tutorial Period: 12
Total Marks in End Semester Exam: 80
Minimum No. Of Class test to be conducted: 2
UNIT I
Financial Management –an overview: Introduction, finance and other disciplines, objectives and scope of
financial management, role and responsibility of finance manager.
[No of Periods: 8 + 2]
UNIT II
Working capital management-nature, need, importance and concept of working capital, trade off between
profitability and risk, Determining finance mix.
[No of Periods: 8 + 2]
UNIT III
Inventory management-Introduction, objectives, ordering cost, carrying cost, lead time, economic order
quantity and safety stock, deterministic model.
[No of Periods: 8 + 2]
UNIT IV
Management of cash-introduction motives for holding cash, objectives of cash management and
technique/process of cash management.
[No of Periods: 8 + 2]
UNIT V
Receivables management-introduction, objectives, credit terms, credit policies and collection policies.
[No of Periods: 8 + 2]
Text books:
Basic financial management, M Y Khan and P K Jain, TMH
Financial Management, I M Pandey.
References books:
Financial management and policy, V K Bhalla,Anmol publications pvt. Ltd.
Financial management, Van Horne.
Page 24
CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY
BHILAI (C.G.)
Semester : VIII Branch : Common to All Branches
Subject : Project planning management and Evaluation Code : 300888 (36)
Total Theory Periods : 40 Total tutorial Period : 12
Total Marks in End Semester Exam :80
Minimum No. Of Class test to be conducted : 2
UNIT I
Identification of projects-generation and screening of idea, monitoring corporate appraisal, preparing
project profiles and project rating index.
UNIT II
Feasibility studies: Market and demand analysis, technical analysis, financial analysis and economic
viability.
UNIT III
Project appraisal: Criteria, net present value, internal rate of return, payback period and accounting rate of
return method.
UNIT IV
Project management and implementation-
Project planning, project control, prerequisites of implementation. Network techniques of project
management-Project evaluation and review technique (PERT) and critical path method (CPM).
UNIT V
Project review and control-
Initial review, performance evaluation, abandonment analysis and its behavioral issues.
Text books:
Project planning, analysis, selection, implementation and review by Prasanna Chandra, TMH.
Reference Books:
Project management-Dr. Harold Kerzner.
Total Project management-Dr. P K Macmillan.
Page 25
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Safety Engineering Code: 300889 (37)
Total Theory Periods: 50 Total Tutorial Period : 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
UNIT – I
Safety Philosophy and principles of Accident prevention
Introduction, accident, injury, unsafe act, unsafe condition, reportable accidents, need for safety, break
down of accidents, hazardous industries.
Theories & Principle of accidents
Casualty, cost of accident, computation of cost, utility of cost data.
Accident reporting & Investigation
Identification of the key facts, corrective actions, classification of facts.
Regulation American (OSHA) and Indian Regulation.
UNIT – II
Safety Management
Division of responsibility, Location of Safety function, size of safety department, qualification for safety
specialist, safety committee – structure and functions.
UNIT – III
Safe Working Condition and Their Development
SOP for various Mechanical equipments, Incidental safety devices and methods, statutory of provisions
related to safeguarding of Machinery and working condition.
UNIT – IV
Safety in Operation and Maintenance
Operational activities and hazards, starting and shut down procedures, safe operation of pumps,
compressor, heaters, reactors, work permit system, entry into continued spaces.
UNIT – V
Safety in Storage and Emergency Planning
Safety in storage, handling of chemicals and gases, storage layout, ventilation, safety in chemical
laboratories, emergency preparedness on site plan, off site plan, toxic hazard control.
TEXT BOOKS
Safety and Accident Prevention in Chemical Operation – H.H. Faweett and Wood
Personal Protective Equipment – NSC Bombay
REFERENCE BOOKS
Ergonomics - P. Krishna Murthy
Fire Prevention Hand Book – Derek James
Page 26
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Bioinformatics Code: 300890 (22)
Total Theory Periods: 4 per week. Total Tut Periods: Nil.
Total Marks in End Semester Exam: 80.
Minimum number of class tests to be conducted: 02.
UNIT-1
Bioinformatics-introduction, Application, Data Bases and Data Management, Central Dogma;
information search and Data retrieval, Genome Analysis and Gene mapping- Analysis, Mapping, Human
Genome Project (HGP).
UNIT-2
Alignment of Pairs and Sequences; Alignment of Multiple Sequences and Phylogenetic Analysis; Tools
for similarity Search and Sequence Alignment- FASTA BLAST.
UNIT-3
Profiles and Hidden Marcov Models (HMMs); Gene Identification and Prediction-Basics, Pattern
Recognition, Methods and Tools; Gene Expression and Micro arrays.
UNIT-4
Protein Classification and Structure Visualization; Protein Structure Prediction; Proteomics;
Computational methods-Analysis of Pathways, Metabolic Network Properties, Metabolic Control
Analysis, Stimulation of Cellular Activities, Biological Mark Up Languages.
UNIT-5
Drug Discovery-Introduction, Technology and Strategies, Cell Cycle, G-protein, Coupled, Receptors.
Computer Aided Drug Design-Introduction, Drug Design Approaches, Designing methods, ADME-Tox
Property Prediction.
TEXT BOOKS
I. BIOINFORMATICS by S.C. Rastogy, 2nd
Edition, Prentice Hall of India.
II. BIOINFORMATICS by V. R Srinivas, Prentice Hall of India
REFERENCES
1. BIOINFORMATIC COMPUTING by Bergeron, MIT Press.
2. Evolutionary Computation in Bioinformatics, Gary B. Fogel, David W. Corne (Editors), 2002
3. Introduction to Bioinformatics, Arthur M. Lesk, 2002, Oxford University Press
4. Current Topics in Computational Molecular Biology (Computational Molecular Biology), Tao
Jiang, Ying Xu, Michael Zhang (Editors), 2002, MIT Press
Page 27
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Energy Conservation & Management Code: 300891 (37)
Total Theory Periods: 50 Total Tutorial Period : 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
UNIT – I
Energy Scenario
Commercial and Non-commercial energy, primary energy resources, commercial energy production, final energy
consumption, energy needs of growing economy, long term energy scenario, energy pricing, energy sector reforms,
energy and environment, energy security, energy conservation and its importance, re-structuring of the energy
supply sector, energy strategy for the future, air pollution, climate change, Energy Conservation Act – 2001 and its
features.
UNIT – II
Energy Conservation in Electric Utility and Industry
Energy costs and two-part tariff, Energy conservation in utility by improving load factor, Load curve analysis,
Energy efficient motors, Energy conservation in illumination systems, Importance of Power factor in energy
conservation – Power factor improvement methods, Energy conservation in industries, case studies.
UNIT – III
Energy in Manufacturing
Introduction, Energy and Environmental Analysis of Products, Energy Consumption in Manufacturing, Energy
Conservation, Transportation Systems, Water Conservation, Rules for the Efficient Conservation of Energy and
Materials, Laws of Energy and Materials Flows.
UNIT – IV
Heat Recovery System
Sources of waste heat and its potential applications, heat recovery systems in Shell & Tube Heat Exchangers, Plate
Heat Exchangers, Tubular Heat Exchangers. Vapour recompression and Energy conservation in Evaporator
systems. Thermal Wheel, Heat Pipe, Heat Pumps. Waste Heat Boilers – Low Pressure & High Pressure
Applications.
UNIT – V
Energy Conservation Economics
Basic discounting, life cycle costing and other methods, factors affecting economics, energy pricing and incentives
for conservation, energy conservation of available work identification of irreversible processes, primary energy
sources, Optimum use of prime movers, energy efficient house keeping, energy recovery in thermal systems, waste
systems and waste heat recovery in thermal systems, waste heat recovery techniques, conservation in energy
intensive industries, thermal insulation.
TEXT BOOKS
1. Energy Management – W.R. Murphy, G. Mckay –
2. Energy Management – Paul O‟Callaghan –
3. Engineering Economics & Engineering Management – R. Raju – Anuradha Agencies
REFERENCE BOOKS
1. Principles of Energy Conversion – Archie W. Culp – Jr. International Student Edition – McGraw Hill
Publishers
2. Energy Management in illuminating System – Kao Chen – CRC Publishers
3. Industrial Energy Recovery - D.A. Reay – Wiley Publishers
Page 28
4. Thermal Energy Recovery – T.L. Boyer – Wiley Publishers
5. Energy Conservation Through Control – E.G. Shinskey – Academic Press
6. Economics of Solar Energy & Conservation Systems, Vol-I & II – F. Kreith & R.E. West – CRC
Press
Page 29
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Nanotechnology Code: 300892 (47)
Total Theory Periods: 50 Total tutorial Period: NIL
Total Marks in End Semester Exam: 80
Minimum No. of Class test to be conducted:2
Unit I : Introduction to nanotechnology: background, definition , basic ideas about atoms and molecules,
physics of solid state, review of properties of matter and quantum mechanics
Unit II : Preparation of Nanostructured Materials : Lithography : nanoscale lithography, E-beam
lithography, dip pen lithography, nanosphere lithography. Sol gel technique Molecular synthesis, Self-
assembly, Polymerization
Unit III : Characterization of Nanostructured materials : Microscopy: TEM, SEM, SPM techniques,
confocal scanning microscopy,, Raman microscopy-Basic principles, applicability and practice to
colloidal, macromolecular and thin film systems. Sample preparation and artifacts. Polymer fractionation
techniques: SEC, FFF, Gel electrophoresis.: Basic theory, principles and practice.
Thermal analysis: Basic principles, theory and practice. Micro DSC in the study of phase behavior and
conformational change.
Mass spectrometry of polymers: MALDI TOF MS – Basic theory, principles and practice. Applicability
to proteins, polyethers, controlled architecture systems
Unit IV : Cross-cutting Areas of Application of Nanotechnology : Energy storage, Production and
Conversion. Agriculture productivity enhancement Water treatment and remediation. Disease diagnosis
and screening. Drug delivery systems. Food processing and storage. Air pollution and remediation.
Construction. Health monitoring..Vector and pest detection, and control. Biomedical applications.
Molecular electronics. Nanophotonics. Emerging trends in applications of nanotechnology
Unit V : Industrial Implications of Nanotechnology : Development of carbon nanotube based composites.
Nanocrystalline silver Antistatic conductive coatings. Nanometric powders. Sintered ceramics.
Nanoparticle ZnO and TiO2 for sun barrier products. Quantum dots for biomarkers. Sensors. Molecular
electronics. Other significant implications
References:
1. Guozhong Cao, “Nanostructures and Nanomaterials”, Imperial College Press, London
2. Mark Ratner and Daniel Ratner, “A Gentle Introduction to Next Big Thing”, Pearson Education
2005
Page 30
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Intellectual Property Rights Code: 300893 (36)
Total Theory Periods: 40 Total tutorial Period: 12
Total Marks in End Semester Exam: 80
Minimum No. Of Class test to be conducted:2
Unit-I
Basic Concepts of Intellectual Property: Introduction to intellectual property rights, laws and its Scope, Trade
Related Aspects of Intellectual Property Rights.
Unit-II
Patents: Introduction to patent law and condition for patentability, Procedure for obtaining patents, Rights of a
patentee, Patent infringements, Biotechnology patents and patents on computer programs, Patents from an
international perspective.
Unit-III
Trademark and „geographical Indications: Statutory authorities and registration procedure, Rights conferred by
registration, Licensing, assignment and transfer of trademark rights, Trademark infringement, Geographical
Indication of Goods & Appellations of Origin.
Unit-IV
Copyright: Registration procedure and copyright authorities, Assignment and transfer of copyright, copyright
infringement and exceptions to infringement, Software copyright
Unit-V
Introduction to the law on Industrial Designs, Registration and piracy, International perspective, Introduction to the
law on semiconductor layout design, Registration, commercial exploitation and infringement.
Text Books:
1. Vinod V Sople ,Managing Intellectual Property, – PHI
2. Kumar K ,Cyber law, intellectual property and e-commerce security, Dominent Publication and
distribution, New Delhi.
Reference Books:
1. Inventors Guide to Trademarks and Patents- Craig Fellenstein, Rachel Ralson- Pearson Education.
2. Intellectual Property –David Bainbridge, Longman
Page 31
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Value Engineering Code: 300894 (37)
Total Theory Periods: 50 Total Tutorial Period: 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
UNIT – I
Basic Concepts
Meaning of the term value, basic kind, reasons for poor value, value addition, origin and history.
Benefits, relevance in Indian scenario.
UNIT – II
Techniques
Different techniques, organizing value engineering study, value engineering and quality.
UNIT – III
Job Plan
Different phases, General phase, Information phase, Functional Phase, Creation Phase, Evaluation Phase,
Investigation Phase, Implementation Phase, Audit.
UNIT – IV
Selection of evaluation of VE Projects
Project selection, method selection, value standard, application of methodology.
UNIT – V
Value Engineering Program
VE operations in maintenance and repair activities, VE Cost, life cycle, cost model, training for VE,
general value engineering, case studies.
TEXT BOOKS
Value Engineering – S.S. Iyer – New Age International Publishers, New Delhi
Industrial Engineering & Management – O.P. Khanna – Dhanpat Rai & Sons
REFERENCES
Techniques of Value Analysis and Engineering – L.D. Miles – McGraw Hill, New York
Value Engineering, A Systematic Approach – A.E. Mudge – McGraw Hill, New York
Compendium on Value Engineering – H.G. Tufty – Indo American Society
Page 32
Chhattisgarh Swami Vivekanand Technical University, Bhilai
Semester: VIII Branch: Common to All Branches
Subject: Disaster Management Code: 300895 (20)
Total Theory Periods: 40 Total Tutorial Periods: 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
Unit 1
Nature of disasters – natural and other disasters, Earthquakes, floods, draught, cyclones, fire and other
environmental disasters.
Unit 2
Behaviour of structures in disaster prone areas, Disaster zoning, Hazard assessment, Environmental
Impact Assessment
Unit 3
Methods of mitigating damage during disasters, disaster preparedness.
Unit 4
Management systems during disasters, Construction Technology for mitigation of damage of structures.
Unit 5
Short-term and long-term relief measures.
Name of Text Books:
Design of Earthquake Resistant Buildings – Minoru Wakabayashi (McGraw Hill Publication)
Dynamics of Structures: Theory and Application to Earthquake Engineering (2nd
edition) – Anil K Chopra
(Pearson Education Publication)
Name of Reference Books:
Fundamentals of Vibrations – Anderson, R.A. (Mc Millan)
IS – 1893 (Part I): 2002, IS – 13920: 1993, IS – 4326: 1993, IS-13828: 1993
Earth quake engineering damage assessment and structural design – S.F. Borg
Disasters and development – Cuny F (Oxford University Press Publication)
Page 33
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Construction Management Code: 300896 (20)
Total Theory Periods: 40 Total Tutorial Periods: 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
Unit 1
The Owner's Perspective
Introduction-The project life cycle-Major Types of Construction-Selection of Professional Services-Construction
contractors-Financing of constructed facilities-Legal and regulatory Requirements-The changing Environment of
the construction Industry-The Role Project Managers
Unit 2
Organizing for Project Management
What is project management? – Trends in Modern Management-Strategic planning and project programming-
Effects of project risks on organization-Organization of Project Participants-Traditional designer-Constructor
sequence-Professional construction management-Owner-Builder-Operation-Turnkey operation-Leadership and
Motivation for the Project team-Interpersonal behaviour in project organization-perceptions of Owners and
Contractors
Unit 3
The Design and Construction Process
Design and construction as an integrated system-Innovation and technological Feasibility-Innovation and
technological feasibility-Design Methodology-Functional Design-Physical Structures-Geo-Technical Engineering
Investigation-Construction Site Environment-Value engineering-Construction Planning-Industrialized
Construction and Prefabrication-Computer -Aided Engineering
Unit 4
Labour, Material and Equipment Utilization Historical Perspective – Labour Productivity-Factors Affecting Job-Site Productivity-Labor Relations in
construction-Problems in collective bargaining-Materials Management-Materials Procurement and Delivery-
Inventory control-Tradeoffs of cost in Material Management-Construction Equipment-Choice of Equipment and
Standard production Rates-Construction Processes Queues and Resource Bottlenecks
Unit 5
Cost Estimation
Costs Associated with Construction Facilities-Approaches to cost estimation-Type of construction cost estimates-
Effects of scale on construction cost-Unit cost-Method of estimation-Methods for allocation of joint costs-
Historical cost data-Cost indices-Applications of cost Indices to Estimating-Estimate based on Engineers List of
Quantities-Allocation of Construction costs over time-Computer Aided cost Estimation-Estimation of operating
costs
Name of Text Books:
Construction Project Management Planning, Scheduling and Control – Chitkara, K.K. (Tata McGraw Hill
Publishing Co., New Delhi, 1998)
Project Mangement: A systems Approach to Planning, Scheduling and Controlling – Harold Kerzner (CBS
Publishers & Distributors, Delhi, 1988)
Page 34
Name of Reference Books:
Project management for Construction: Fundamental Concepts for owners, Engineers, Architects and
Builders – Chris Hendrickson and Tung Au, (Prentice Hall, Pitsburgh, 2000)
Construction Project Management – Frederick E.Gould (Wentworth Institute of Technology, Vary
E.Joyce, Massachususetts Institute of Technology, 2000)
Project Management – Choudhury, S. (Tata McGraw Hill Publishing Co., New Delhi, 1988)
Applied project Engineering and Management – Ernest E. Ludwig (Gulf Publishing Co., Houstan, Texas,
1988)
Page 35
Chhattisgarh Swami Vivekanand Technical University, Bhilai
Semester: VIII Branch: Common to All Branches
Subject: Ecology and Sustainable Development Code: 300897 (20)
Total Theory Periods: 40 Total Tutorial Periods: 12
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 2
Unit 1
Nature of ecology and sustainable development
Definition, scope of ecology an sustainable development, geomorphology, oceanography, climatology
and biogeography.
Unit 2
Energy and environment
Introduction of energy environment, use of solar cells for heating and operated drills, methane gas
digesters, environmentally friendly method of energy conservation, difference between conventional and
non-conventional energy sources, future trends of energy systems.
Unit 3
Theory of isostasy
Concept of isostasy for sustainable development, discovery of the concept, concept of Hayford and
Bowie, Joly, and Holmes, Global isostatic adjustment.
Unit 4
Physical geography and man human impact on the natural environment
Modification of land forms, direct alternation of land forms, wind deflation, coastal erosion and
deposition, modification of the atmosphere, ultration process in eco and energy systems.
Unit 5
Obstacles in sustainable development
Pollution growth, species extinction, restriction of bat lands, desertification, soil erosion, soil pollution,
characterisation of contaminated soil, global warming and ozone depletion etc.
Name of Text Books:
Energy and environment – Fowler (McGraw Hill, New Delhi)
Restoration Ecology and sustainable development – Krystyna M. Urbanska et.al. (Cambridge University
Press, U.K.)
Name of Reference Books:
Reuniting Economy and Ecology in Sustainable Development – Russ Beaton et.al. (-----)
Theory and implementation of economic models for sustainable development – Jeroen C.J.M. Van Den
Bergh (-----------)
Economy and Ecology: Towards sustainable development – F. Archibugi et.al. (---------)
Evaluating Sustainable Development: Giving People a voice in their destiny – Okechukwu Ukaga et.al. (-
------)
Page 36
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Non Conventional Energy Sources Code : 300898 (19)
Total Theory Periods: 50 Total Tutorial Periods: 00
Total Marks in End Semester Exam: 80
Minimum number of class tests to be conducted: 02
Note: Internal Choice may be given in any three units.
Unit I Environmental Aspects of Power Generation, Heat Transfer for Solar Energy, Utilization Flat Plate
Collectors: Physical principles of conversion of solar radiation into heat, Thermal losses and efficiency of
FPC, Practical considerations for flat plate collectors, Applications of FPC – Water heating and drying
.Focusing Type Collectors: Orientation and sun tracking systems, Types of concentrating collectors –
Cylindrical parabolic collector, Compound parabolic collector, Thermal performance of focusing
collectors, Testing of solar collectors.
Unit II Solar cooking, solar desalination, solar ponds and solar space heating Solar Industrial process heating and
Solar power generation. Solar Green Houses, Solar thermo mechanical power, solar refrigeration & air
conditioning and Solar High Temperature Applications Gasifier- Classification, Chemistry, Application,
advantages, disadvantages and application.
Unit III Energy from Biomass: Type of biomass sources, biomass generation, factors affecting biodigestion,
classification, advantages and disadvantages of biogas plants, community biogas plants, problems related
to biogas plants, utilization of biogas. Energy plantation, methods for obtaining energy from biomass,
thermal gasification of biomass.
Unit IV Chemical Energy Sources: Fuel cells: Design, principle, classification, types, advantages and
disadvantages Hydrogen Energy: Properties of hydrogen, methods of hydrogen production, physical and
chemical principles, storage, advantages and application
Unit V Wind Energy: Basic principle, wind energy conversion, wind energy conversion systems, design
consideration, performance and application.Alcohol fuels: Overview, feedstock, methods for alcohol
production, alcohol as an engine fuel; LPG, CNG Hydrogen and Ethanol as an alternative liquid fuel;
engine performance with alcohol fuels. Tidal Energy.
Name of Text Books:
1. John A Duffie & William A Beckman: Solar Energy Thermal processes Wiley Inter science
publication
2 H P Garg & J Prakash, Solar Energy – Fundamentals and Applications: - Wiley Inter science
Name of Reference Books:
1. G D Rai, Solar Energy Utilization – Khanna publishers.
2. S P Sukhatme, Solar Energy – Principles of thermal Collection & Storage – Tata
McGraw Hill Publishing company ltd., New Delhi
Page 37
Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)
Semester: VIII Branch: Common to All Branches
Subject: Energy Auditing Code: 300899 (24)
Total Theory Periods: 50 Total Tut Periods: Nil
Total Marks in End Semester Exam: 80
Minimum number of Class tests to be conducted: 2
UNIT I:
History of Energy Management: Energy forecasting, Limitations of energy resources. Renewable energy recourses.
Load management. Energy management. Demand side management (DSM) Energy conservation in realistic
distribution system. Short term load forecasting for de-centralized load management.
UNIT II:
Energy Situation and Global Energy Sources: World energy consumption. Energy in developing countries. Firewood
crises. Indian energy sources. Non-conventional renewable energy sources. Potential of renewable energy sources.
Solar energy types. Wind energy. Wave, tidal and OTEC. Super-conductors in power system. Wind power
generation for large scale generation of electricity. Wind driven induction generators.
UNIT III:
Energy Auditing as Applicable to an Industry: Classification of energy audit System optimization. Power factor
improvement. Preventive maintenance. Process modification. Non-conventional energy sources. Electricity tariffs.
Types of off-peak tariffs.
UNIT IV:
Elements of Energy Auditing and Metering Methodologies(Case Studies): Capacity utilization. Technology up-
gradation. Fine tuning, Energy conservation. Concept and methods of energy conservation.
UNIT V:
Demand Side Management: Introduction to DSM. Concept of DSM. Benefits from DSM. DSM techniques. Time of
day pricing, Multi-utility exchange model. Time of day pricing models for planning, load management. Load
priority technique. Peak clipping. Peak shifting. Valley filling. Strategic conservation. Energy efficient equipment,
Socioeconomic awareness programs.
Text Books:
1. Ashok.V.Desai(ED)-Energy Demand: Analysis, Management and Conservatioin, Wiley Eastern Ltd., New
Delhi.
2. S. Rao, Parulekar, Energy technology, Khanna Pbs.
Reference Books:
1. Jyothi Prakash- Demand Side Management, Tata McGraw-Hill Publishers.
2. N.K.Bansal, Kleeman Millin-Renewable Energy Sources and Conservation Technology, Tata McGraw-Hill
Publishers.