CHECK VALVES - Maass Midwestmaassmidwest.com/PDFs/Maass_Midwest_Catalog_580.pdf · 2020. 8. 7. · DUCTILE IRON CHECK VALVES DUCTILE IRON CHECK VALVES 600 SPRING LOADED CHECK VALVE

| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 1

CHEC

K VA

LVES

CHECK VALVES531 CHECK VALVE | 1/2# cracking pressure | Patented

Features:• The mating pipe cannot block the valve from operating• Longer threads make for an excellent valve when used with PVC pipe• The Celcon guide compresses into the valve body preventing the valve from coming apart during operation• Celcon guide and poppet manufactured from same materials for longer wearability• Square hole in Celcon guide prevents grit retention, eliminates wear• Celcon bullet shaped poppet for smooth flow,excellent for VFD pumps• Tapered seat washes clean• Coined seat for smooth hardened surface• The seat I.D. is the same as the mating pipe I.D. - a full flow valve 40-60% greater flow than industry standard• For vertical use• All of these features are contained in a water works grade 81 Red Brass body• Excellent for hot water heat systems; rated at 180 degrees• Lead Free: ≤ .025% Lead Content

Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922823 922824 922825 922826

1 1-1/4 1-1/2

2 • Female x Female In-line Check

0.8 1.3 1.6 2.8

25 25

IND. IND.

See separate price list

529 CHECK VALVE | 1/2# cracking pressure | Patented • Lead Free: ≤ .025% Lead Content


1 x 1 1-1/4 x 1

1-1/4 x 1-1/42 X 2

0.8 0.9 1.2 2.6

25 25 25

IND.


529 XLT CHECK VALVE | Patented Features:• Designed for special Bell Socket PVC Drop Pipe • Lead Free: ≤ .025% Lead Content

• Male x Female In-line Check (pump head use)

Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922700 922702 922704

1 1-1/4

2

1.0 1.5 3.3

25 25

IND.


530 CHECK VALVE | 1# cracking pressure Features• Heavy red brass body for maximum strength • Spool type brass poppet eliminates sticking • Buna-n rubber facing for water, oil or gas • Silent operation in horizontal or vertical position • Can be used with water, oil or gas • Lead Free: ≤ .025% Lead Content

• Male x Female

Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922579 922582 922585 922588 922591 922594 922597 922600 922603

1/2 3/4 1

1-1/4 1-1/2

2 2-1/2

3 4

0.6 1.2 1.5 1.8 2.5 3.8 7.0 13.0 38.0

25 25 2525

IND.IND.IND.IND.IND.


• Female x Female In-line Check

Note: All brass foot and check valves rated at 200 psi at 180°F operating temperature.

531

529

529XLT

530

2 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |

CHECK VALVES536-S TAPPED CHECK VALVE

Features: • One 1/8” hole for 645 air valve on inlet side• Lead Free: ≤ .025% Lead Content


1 1-1/4 1-1/2

2

0.8 0.9 1.2 2.6

1.5 2.0 3.0 4.0


• Female x Female Check CHECK VALVESDUCTILE IRON CHECK VALVES

538-S TAPPED CHECK VALVE Features: • One 1/8” hole for 645 air valve on inlet side • One 1/4” hole for pressure switch on outlet side• Lead Free: ≤ .025% Lead Content

• Female x Female Check 539-S TAPPED CHECK VALVE

Features: • Two 1/4” holes - 90° apart on outlet side • Lead Free: ≤ .025% Lead Content

• Female x Female Check

Part Number Size (Inches) Weight (lbs) List Price Each 922687 922690 922693 922694

1 1-1/4 1-1/2

2

1.5 2.0 3.0 4.0


Part Number Size (Inches) Weight (lbs) List Price Each 922715 922716

1 1-1/4

1.5 2.0


DUCTILE IRON CHECK VALVES

DUCTILE IRON CHECK VALVES600 SPRING LOADED CHECK VALVE

Features:• Ductile iron body• Stainless steel spring and nut • Lead free (≤ 0.25% lead content)• Powder coated finish• Silicone bronze poppet


68

48.7 63.7


600 SPRING LOADED CHECK VALVE WITH BREAK OFF PLUG Features:• Include 1/2” stainless steel break off plug


68

49.0 64.0


BREAK OFF PLUG ONLYFeatures:• Includes 1/2” stainless steel as standard

Part Number Size (Inches) Weight (lbs) List Price Each 922561 1/2 0.50 See separate price list

630 SPRING LOADED CHECK VALVE Features:• Designed for VFD systems• Stainless steel spring and nut • Ductile Iron body

Part Number Size (Inches) Weight (lbs) List Price Each 922800 922801 922802 922803

3456

11.726.133.749.1


536-S

538-S

539-S

600

Break OffPlug Only

630

• Female x Female Inline Check

• Female x Male

• Female x Female Inline Check

• Stabilizer sleeve increases contact area • Lead free (≤ 0.25% lead content)• 600 PSI working pressure


Part Number Size (Inches) Weight (lbs) List Price Each

FOOT VALVES

FOOT

VAL

VES

534 FOOT VALVE Features:• Heavy red brass body• Brass spool type poppet• Brass screen strainer• Rubber facing for water, oil and gas • Lead free (≤ 0.25% lead content)

Part Number Size (Inches) Size of Pipe Valve Weight (lbs) List Price Each Valve Fits Inside

922747 922750

11-1/4

1-1/22

0.81.0


634 FOOT VALVE Features:• Heavy red brass body• Brass O-ring type poppet • Stainless steel screen strainer• Lead free (≤ 0.25% lead content)

Part Number Size (Inches) Weight (lbs) List Price Each 922776 922777 922778 922779 922780 922782 922789 922790

3/4 1

1-1/4 1-1/2

2 3 4 6

0.53 0.74 1.26 1.50 2.72 9.00 16.50 35.00


540 FOOT VALVE Features:• Cast iron body and strainer• Leather flapper check • Open area of strainer exceeds pipe area• Tapped IPS • Use for irrigation or drainage or effluent

Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 931671 931673931674 931676

2346

PTDPTDPTDPTD

5.510.518.648.55


500 FOOT VALVE (Strainer Only) Features:• Reduces inventory - can be used on any female tapped check valve • Strainer made of plastic

542750 542755

1 1-1/4

0.10.1


FV4-1 FOOT VALVE Features:• Manufactured from Delrin™

Part Number Size (Inches) Weight (lbs) List Price Each 922860 FV4-1 Fits 3/4” to 1 1/2” pipe size See separate price list

534

634

540

500

FV4-1


PUMP STOP VALVES

CYCLE SLAYER PUMP STOP VALVESFeatures:• Controls pump cycling, reducing amount of electricity used by the pump• Eliminates early pump failure and reduces pump cycling, increasing the life of pumps• Reduces the size of pressure tank necessary• Adjustable bypass valves easily control run-time• Prevents and controls water hammer

PLASTIC FIXED PRESSURE SERIESFeatures:• 1” valve can be used in 4” or larger well• Preset to 50 psi• 1/4” valve can be used in 5” or larger well• Tank fill rate 2.95 gpm• Lead free (≤ 0.025% lead content)• Thermoplastic construction

Friction Loss Data, Plastic Models: Flow Rates - GPM/Gallons per Minute

IN-WELL COUPLING ADAPTOR

BRASS SERIESFeatures:• Bronze or stainless steel body• Double union inlet and outlet construction• Thermoplastic seat • By-pass feature controls expansion pressure• Sealed spring cage for accessible outdoor instrallations• Lead free (≤ 0.25% lead content) • Metal cage


CAST IRON SERIESFeatures:• Adjustable by-pass• Bronze body construction• Field serviced without removal of valve• Liquid-filled stainless steel gauge• Adjustable 25-85 PSI• Stainless steel control lines• Lead free (≤ 0.025% lead content)


Part Number Model Size Preset 5 10 15 20 30 40 50 60 85 100 List Price Ea.


935822-40935822-50935822-60 935824-40

PS-100PPS-100PPS-100P PS-125P

3.36 2.60 1.822 2.35 5.40

3.04 2.66 2.33 2.97 4.14 5.62

1” 1”1”

1-1/4”

40 PSI50 PSI60 PSI40 PSI

IN-WELL COUPLING ADAPTOR Part Number Model Size Description List Price Each

935826 935828

PS-WC PS-WC

1” 1-1/4”


Well Couping Adapter Well Couping Adapter

Part No. Model Size/Description 5 10 15 20 30 40 50 60 85 100 List Price Ea.


935812 935814 935836 935838

PS100B-1 PS125B-1-1/4 PS125B-1-1/4

PS200B-2

7.5 13 22 6 7.5 9 11 13 16 21

1”/Adj. 25-75 PSI 1-1/4”/ Adj. 25-75 PSI

Adj. 20-90 PSI Adj. 20-90 PSI

Part No. Model Size Type 30 40 60 80 100 200 400 600 800 1000 List Price Ea.


935802 935804 935806

PS-200 CI PS-300 CI PS-400 CI

.2 .33 .7 1.22 2.0 8.0 1.22 .2 .3 1.2 5.0 12.0 18.0 4.0 4.0 8.0 15.0 24.0

2” 3” 4”

Globe Globe Globe


PartNumber Model

DischargePipe

(Inches)

Supply Pipe

(Inches)

Casing Size(Inches)I.D./O.D.

Hole SizeRequired(Inches)

Shipping Weight(lbs-oz.)

WorkingLoad(lbs.)

Quantity/Carton

TM PITLESS ADAPTERS

DICK

ENS

PITL

ESS

ADAP

TERS

Features: • Precision machined all red brass castings with neoprene O-ring • Large inner and outer rubber gaskets to seal out surface water contamination • All Dicken pitless adapters are pressure tested to 150 psi • Chamfered slide for fast and easy installation • Wrench grip on ell speeds installation • A built in lowering eyelet for easier installation • Water System Council - PAS-97 (2012) listed • Lead Free: ≤ .025% Lead Content

PartNumber Model

DischargePipe

(Inches)

Supply Pipe

(Inches)

Casing Size(Inches)

I.D.

Hole SizeRequired(Inches)

Shipping Weight(lbs-oz.)

WorkingLoad(lbs.)

Quantity//Carton

952156952158

JR-S-10*JR-S-10-P

11

11

4-1/2 to 124-1/2 to 12

1 5/81 5/8

2 lbs. 5 oz.2 lbs. 5 oz.

15001500

1212

952110952160952112952162

LD-S-10*LD-S-10-P

LD-S-12LD-S-12-P

11

1-1/41-1/4

11

1-1/41-1/4

5 to 125 to 125 to 125 to 12

1-3/41-3/42-1/42 -1/4

4 lbs. 2 oz.4 lbs. 3 oz.5 lbs. 8 oz.5 lbs. 9 oz.

2000200020002000

121288

952010952012952015952016952020

S-10S-12S-15

S-15PS-20

11-1/41-1/21-1/2

2

11-1/41-1/21-1/2

2

5 to 125 to 12

5-3/16 to 125-3/16 to 125-5/8 to 12

1-3/42-1/42-5/82-5/83-1/8

5 lbs.13 oz.8 lbs. 2 oz.

10 lbs.12 oz.10 lbs.12 oz.14 lbs. 4 oz

50005000500050005000

86664

952150 LD-2-X upper

LD-2-X lower

1-1/41

1-1/41 4-1/2 to 12

2-1/41-3/4 11 lbs. 9 oz. 2000 6

• Pressurized model available for counties and states where required. • JR-S-10 may be used on 4” casing with 3” pump. • NOTE: Part Number 952015 Model S-15 not designed for STR17 5” PVC casing.

CLEARWAY PITLESS ADAPTER | Patented Features:• Simple slip fit insert • Easy installation by cutting 2 3/4” hole and clamping on • Clamp on units for no obstruction in well casing ID • Lead Free: ≤ .025% Lead Content

952040 CW-4-10 1 1 4 4-1/2 2-3/4 5 lbs. 1 oz. 2000 6952050 CW-5-10 1 1 4-1/25

55-9/16 2-3/4 5 lbs. 0 oz. 2000 6

952060 CW-6-10 1 1 6 6-5/8 2-3/4 5 lbs. 14 oz. 2000 6952045 952047 952055 952065 952066 952067 952058

CW-4-10-WACW-4.5-10-WACW-5-10-WACW-4-12-WA

CW-4.5-12-WACW-5-12-WACW-6-12-WA

111

1-1/41-1/41-1/41-1/4

111

1-1/41-1/41-1/41-1/4

44-1/2

54

4-1/256

4-1/25

5-9/164-1/2

55-9/166-5/8

2-3/42-3/42-3/42-3/42-3/42-3/42-3/4

6 lbs. 0 oz.6 lbs. 8 oz.6 lbs. 8 oz.6 lbs. 5 oz.6 lbs. 12 oz.6 lbs. 5 oz.6 lbs. 15 oz.

2000200020002000200020002000

6666666


MAASSTM PITLESS ADAPTERS


MAASS MODEL J WELD-ON PITLESS ADAPTER | PatentedFeatures:• Permanently installed by welding for increased strength and durability• J Series of adapters and units available with stainless steel, nickel-bronze inserts,

stainless steel housings, and viton or teflon O-rings• Only two one inch outlet size Model J Pitless needed to fit all well casing sizes

PartNumber Model

DischargePipe

(Inches)

Drop Pipe

(Inches)I.D. Casing Size

(Inches)Weight(Lbs.)

WorkingLoad(lbs.)

List PriceEach

928100928105928110928115928120928125928130928135928140928145928150

4J14J1 1/44J1 1/2

5J26J1

6J1 1/46J1 1/2

6J26J2 1/2

8J310J4

11-1/41-1/2

21

1-1/41-1/2

22-1/2

34

11-1/41-1/2

21

1-1/41-1/2

22-1/2

34

4-54-54-55

6-7-8+6-7-8+6-7-8+6-7-8+6-7-8+

8-10-12+10-12-14+

6.07.08.512.06.07.08.512.018.032.050.0

4000500050006000400050005000600080001000015000

See separate

pricelist

MAASS MODEL JJ WELD-ON PITLESS ADAPTER FOR SUCTION PUMPS | Patented

Features:• Lateral (2”) can be pressurized to meet state codes• Wisconsin and Michigan State approved

PartNumber Model

DischargePipe

(Inches)

Drop Pipe



WorkingLoad(lbs.)

List PriceEach

928200928205928210928215

4JJ16JJ1

4JJ1 1/46JJ1 1/4

11

1-1/41-1/4

2222

4-56-7-84-5

6-7-8

13.013.014.014.0

4000400050005000

See separate

pricelist

MAASS MODEL J SERIES OF PITLESS ADAPTER AND UNITS ALL FEATURE:

• Water contacts only 304 stainless steel and brass, eliminates rust, corrosion, and electrolysis in the adapter

• Durable cast steel housing• Tapered 8° slip fitting for easy installation and removal of brass insert• No obstruction left in well casing when brass insert is pulled• Designed for shallow or deep settings and high working pressures• Water System Council - PAS-97 (2012) listed• Lead Free: ≤ .025% Lead Content

MAASS MODEL J SERIES ALL WETTED PARTS 304 STAINLESSWELD ON PITLESS ADAPTERS

Features:• 304 Stainless Steel Insert• Made in the USA• Assembed with foreign and domestic components

PartNumber Model

DischargePipe

(Inches)

Drop Pipe



WorkingLoad(lbs.)

List PriceEach

928100WS928105WS928120WS928125WS928135WS

4J1 WS4J1-1/4 WS

6J1 WS6J1-1/4 WS

6J2 WS

11-1/4

11-1/4

2

11-1/4

11-1/4

2

4-54-5

6-7-8-+6-7-8-+ 6-7-8 +-

6.07.06.07.012.0

40005000400050006000

See separate

pricelist



MASS

TM P

ITLE

SS A

DAPT

ERS


MAASS MODEL JC CLAMP-ON PITLESS ADAPTER | PatentedFeatures:• 304 stainless steel clamps and nuts• Cast steel lips support adapter housing on wall of well casing; no lock needed• Ideal for use on either plastic or steel well casing• Buna N rubber gasket seals cast steel housing against O.D. of well casing at point of

attachment• Lead Free: ≤ .025% Lead Content

PartNumber Model

DischargePipe

(Inches)

Drop Pipe

(Inches)O.D. Casing Size


WorkingLoad(lbs.)

List PriceEach

928300928305928310928315928320928325928330928335928340928345928350928355

4JC150DJC1

5JC160DJC1

6JC17ODJC14JC1 1/4

50DJC1 1/45JC1 1/4

60DJC1 1/46JC1 1/4

7ODJC1 1/4

111111

1-1/41-1/41-1/41-1/41-1/41-1/4

111111

1-1/41-1/41-1/41-1/41-1/41-1/4

4-1/25

5-9/166

6-5/87

4-1/25

5-9/166

6-5/87

11.011.011.011.7511.7512.011.7511.211.2

12.7512.7513.0

400040004000400040004000400040004000400040004000

See separate

pricelist

• NOTE: May be installed with 4 1/2” hand grinder and cutting wheel or cutting torch

MAASS MODEL JC ALL WETTED PARTS 304 STAINLESS CLAMP ON SERIES

Features:• 304 Stainless Steel Insert• Made in the USA• Assembed with foreign and domestic components

PartNumber Model

DischargePipe

(Inches)

Drop Pipe

(Inches)O.D. Casing Size


WorkingLoad(lbs.)

List PriceEach

928300WS928305WS928310WS928315WS928320WS928325WS

4JC1 WS5ODJC1 WS

5JC1 WS6ODJC1 WS

6JC1 WS7JC1 WS

111111

111111

4-4/25

5-9/166

6-5/87

11.011.011.011.7511.7512.0

400040004000400040004000

See separate

pricelist


MAASSTM PITLESS UNITS

MAASS PITLESS UNITS

MODEL JX1 - PITLESS BURY UNITS | Patented

Features:• Maass pitless units constructed of schedule 40 steel pipe• Maass pitless units are Wisconsin, New York, Illinois and Michigan approved• JX1 Unit meets Great Lakes and Upper Mississippi River Board of State

Public Health and Environmental Managers Standards.• JX1 Units can come threaded or plain end for welding• Specify bury depth when ordering JX1 Pitless Units• PA Option and PSP Package available on 1” discharge models for pressure switch in the

well in 5” or larger casing• JX1 units have standard male threads for attachment at base• Lead Free: ≤ .025% Lead Content

• NOTE: Other sizes and combinations of JXI Pitless Units are available.• JX1 units allow 12” above grade stick-up beyond bury depth -

check local codes.

PartNumber Model Number/Model Well Casing Size

Water Outlet & Drop Pipe Size List Price

928500928505928510928515928520928525928530928535928540928545928550928555928560928565928570928575928580928585928590928595928600928605

4JX1-14JX1-1 1/44JX1-1 1/2

5JX1-15JX1-1 1/45JX1-1 1/25JX1 - 26JX1-1

6JX1-1 1/46JX1-1 1/2

6JX1-26JX1-21/2

8JX1-18JX1-1 1/48JX1-1 1/2

8JX1-28JX1-2 1/2

8JX1-310JX1-2

10JX1-2 1/210JX1-310JX1-4

44455556666688888810101010

11-1/41-1/2

11-1/41-1/2

21

1-1/41-1/2

22-1/2

11-1/41-1/2

22-1/2

32

2-1/234

See separatepricelist

Part Number Size Height (H) Standard Weight List Price003325003326

8” x 6”10” x 8”

6”7”

13 1/4 lbs.22 lbs.

See separateprice list

CONCENTRIC REDUCERSFeature: • Fittings conform physically and chemically to ASTM Specification A106

Part Number Model Number List Price

928010 CG See separateprice list

TORCH CUTTING GUIDE:For ease of installation of Model J or JC Pitless Adapter. Please specify casing O.D. and discharge size when ordering

CG


MAAS

S MO

DEL

MB

PI

TLES

S AD

APTE

R

MAASSTM MODEL MB PITLESS UNITFeatures:• Designed for ease and convenience in setting and pulling pumps• For 8, 10, 12, 14, 16, 18, 20, 22, 24 inch and larger wells• Available with 2” through 14” discharge and spool pipe• Standard features include stainless steel inserts used at critical “O” Ring Seal and Spool Seat Surfaces• Vertical turbine and booster pump station units and flow meters available• All MB Units coated inside and outside with FDA & NSF approved 2 part catalytic epoxy meeting AWWA C-210 standard• Meets Great Lakes and Upper Mississippi River Board of State Public Health and Evnironmental Managers standards• Available with all wetted parts made of stainless steel• Lead Free: ≤ 0.25% Lead Content• 9SSE NSF/862

Two large size access holes for wire, airline, controls, chlorination, etc.

Spool has large water passages and is of heavy duty construction 2” through 14”

Rounded corner helps to prevent scraping wires

Upper casing barrel, supplied by factory or

by installer.

Stainless steel screened well vent

Neoprene cap gasket

Electrical junction box is out of the way and protects wire during pump work

Water tight, heavy duty steel cap

Patented

Locking bolts available to secure steel cap, and prevent well tampering

Weld-on connection to well casing; threaded and

compression fittings are available 8” through 26”

Stainless steel rings insure a positive long life seal for “O rings”

Weld-on discharge; flanged, threaded, and slip on ends are

available 2” through 14”

Heavy wall housing

Four centering blocks help to prevent “O ring” damage


MAASSTM MODEL MB PITLESS UNIT

MAASS MODEL MB PITLESS ADAPTER

MB

Heavy Duty = (HD), Extra Heavy Duty = (XHD) with APIR Threads

Submersible = (S), Booster Station = (B), Turbine = (T)

Casing Diameter = (8” - 36”)

Upper Barrel Diameter (10” - 38”)

Discharge Diameter (2” - 14”)

Discharge Type Male Thread = (MT), Female Thread = (FT), Plain End = (P), Flanged = (F)

Pump Pipe (2” - 14”)

National PipeThread = (NPT), APIR Round = (APIR)

Well Cap - Watertight = (WT), Aluminum = (AL), Watertight Aluminum = (AWT)

Bury Depth (if upper casing is ordered)

Custom Features (Please describe) (See Options)

MODEL NUMBER ORDERING GUIDE

OPT

IONS

CAP

SPO

OL

HOUS

ING

MO

DEL

MODEL WELL CASINGHeavy Duty

(HD) 8” 10” 12” 14” 16” 18” or larger

Pump Column Discharge Pipe

Standard 4” 6” 6” 6” 6” 6”

Optional 2”, 3”, 4” 4”, 5” 4”, 5” 4”, 5”, 8” 5”, 8”, 10” 5”, 8”, 10”, 12”

A - Steel watertight cap shown for Heavy Duty Units. Cast Aluminum watertight or submersible cap available. B - Airline Test Block - Optional. C - 304 Stainless Steel rings and seat standard. D - O-Rings - 3/8” cross section. E - Male NPT threads on spool pipe, API threads, Flanges, or Certa-LockTM optional. F - Heavy Duty Units have 1/2” or thicker housing wall. G - Large access channels, Stainless Steel tubes for seal wire connections or flowing

well available. H - Spool discharge openings 100% or greater than spool pipe used. I - Spool Pipe XS wall. J - Upper casing barrel 3/8” thick.

OPTIONS: CD = Chlorinator Discharge FM = Flow Meter SWC = Sealed Wire Connections BPS = Booster Pump Stations ATB = Airline Test Blocks CVS = Check Valve in Spool LB = Locking Bolts TA = Torque Arrestor and Lift-Out Bail HDR = Hold Down Ring RT = Restraining Tabs Other options, please describe

Complete systemes include Maass Midwest Control PanelOPTIONS: Chlorinator discharge; Flow Meters; Airline Test Blocks; Turbine Pump mountings and seals; Sealed wire connections in spool

for Flowing Wells and Booster Pump Stations; Check valve in spool; Locking bolts for well cap; Torque Arrestor & Lift-out bail. *ALL STAINLESS STEEL AND ALL STAINLESS STEEL WETTED PARTS ADAPTERS AVAILABLE UPON REQUEST.


MAASS PROTECTIVE WELL ENCLOSURE

PART NO. SIZE LIST PRICE927630927635927640927645

24” X 30”30” X 30”36” X 30”42” X 32”


Features:• For Maass JX1 and Model MB Pitless Units• Welded air vent with stainless steel screen• Stainless steel lock pins• Shielded Locks• Two lifting eyes on lid• Detent pins for quick release of unit• Specify base options: Cemented or Anchor bolt secured mounting base• Catalytic epoxy coated• Fits all sizes up to 26” well casing

MAAS

S PR

OTEC

TIVE

WEL

L EN

CLOS

URE

PITLESS ADAPTER “O” RINGS

PROT

ECTIV

E W

ELL E

NCLO

SURE

PITL

ESS

“O” R

ING

ADAP

TERS

MAASS J-JX-JC SERIESPART NO. SIZE LIST PRICE001030 001030 001032 001032 001034 001036 001038 001040 990000

J1JC 1-1/4J1-1/4J1-1/2

J2J2-1/2

J3J4

Model J O-Ring Repair Kit


NOTE: Model J O-Ring Repair Kit contains: 12 pcs. J1 O-Rings,6 pcs. J11/4 / J11/2 O-Rings and 3 pcs. J2 O-Rings.

MAASS MODEL MB UNITSPART NO. SIZE LIST PRICE001008001010001012001014001016001018001020001022001024

8” MB HD10” MB HD12” MB HD14” MB HD16” MB HD18” MB HD20” MB HD22” MB HD24” MB HD


VITON “O” RINGSPART NO. SIZE LIST PRICE017350017352017355017360001060001062001064001066001070

LDS-10S-10S-12S-20J1

J1-1/4J2

J2-1/2J-4


NOTE: MB spool requires two “O” rings

TM SERIESPART NO. SIZE LIST PRICE017304 017304 017315 017300 017315 017344 017325 017300 018315 018315 018315 018315 018315 018315

JR-S10LDS-10LDS-12

S-10S-12S-15S-20

LD-2X UPPER/LDX2 LOWERCW-4-10CW-5-10CW-6-10

CW-4-10WA CW-4.5-10WA CW-5-10WA



MAASS SEWAGE ADAPTERS

MAASS SEWAGE ADAPTERSMAASS SEWAGE ADAPTERS (JS)Features:

• Allows for easy service to any submersible pump installation• Brass and 304 stainless material with Viton o-ring seal used to combat corrosion• Not necessary to pump tank to service pump• Rail system can be fabricated by installer or Maass• Large 8° taper slide for ease of installation or removal• Can be used in cisterns and curb wells

PartNumber

ModelNumber

NPTSize

Dimensions (Inches) Weight(Lbs.)

List PriceA B C D

928800 928805 928810 928815 928820

JS 1 1/4JS 1 1/2

JS 2JS 3JS 4

1-1/41-1/2

234

44-/45-1/27-1/27-3/4

66710 12

5-1/8 5-1/4 6-7/8 9-1/2 10-1/2

2-1/8 2-1/8 2-3/4 3-1/2 4-1/8

4000400050005000

See separate

pricelist

Part Number For Models Angle Size List Price928900928905

JS1 1/4, 1 1/2, 2JS3, 4

5/16” x 1 x 15/16” x 1-1/2 x 1-1/2


MAASS SEWAGE ADAPTER SLIDE RAIL SYSTEMFeature: • Rails used to hold adapter in position as well as providing guide system for brass insert• Rails provided are welded in place on J.S. adapter

Part Number Model Number NPT size List Price

928980 JSB-2 2 See separateprice list

MAASS SEWAGE ADAPTERS (JSB)Feature: • Large 8° Taper Slide for ease of installation or removal• 2” NPT inlet and outlet• 1” pipe used for guides and support• 100% brass construction with Viton o-ring seal for corrosion resistance• Allows for easy service to any submersible pump installation• Not necessary to pump tank to service pump

Part Number Model Number NPT size List Price

928985 JSB-2 Fits 1” or 1-1/4” guide pipe only See separateprice list

JSB-2 STAND OFF BRACKETFeature: • 304 SS construction• Fits 1” or 1-1/4” guide pipe• Easily installed beneath septic tank lid or off the wall• Utilizes (2) 1/2” bolts for pipe guide system (not provided)

NOTE: Please specifiy slide rail length when ordering


SEWAGE ADAPTER ACCESSORIES

SEW

WAG

E AD

APTE

R AC

CESS

ORIE

S

Part Number For Model Mounting Holes List Price

928995 JSB-2 9/16” See separateprice list

JSB-2 UNIVERSAL STAND OFF BRACKETFeatures:• 19” overall length allows adjustment every 4 1/2 inches for 1” guide pipe• Durable two part epoxy coating• Utilizes (2) 1/2” bolts for installation to tank wall (not provided)

™ SUMP/SEWAGE ADAPTERSFeatures:• Precision machined all red brass castings• Chamfered slide for fast and easy installation• Red brass ell and slide with Viton o-ring seal• For tanks, pits, cisterns

PartNumber Model

DischargePipe

(Inches)

SupplyPipe

(Inches)

Min.Casing Size

Nominal(Inches)

Hole Size, Required(Inches)

Shipping Weight

(Lbs.-oz)

Working Load(Lbs.)

Qty./Carton

List PriceEach

952178952180952182

LD-S-10-COLD-S-12-CO

S 20-CO

11-1/4

2

11-1/4

2

5*5*

5-5/8*

1-3/42-1/43-1/8

4.05.014.0

2,0002,0005,000

10124

See separate

pricelist

ABS SUMP/SEWAGE CHECK VALVEFeatures:`• Full flow design• Two piece ABS body (sonic welded)• Buna-N flapper seal provides positive sealing• Valves provided with (4) stainless steel clamps• DRS model provided with two rubber reducer sleeves

PartNumber Model No. Description

List PriceEach

940155940150

BSC-200-SBBSC-125/150 DRS

2” IPS1-1/4 or 1-1/2 IPS



PITLESS ADAPTER ACCESSORIES

PITLESS ADAPTER ACCESSORIES

Part Number Model Number List Price928000928002928003928004953110

5J1 PA6J1 PA

5JC1 PA6JC1 PA

LD-S-10-PA


PITLESS ACCESSORY OPTION AND PRESSURE SWITCH PACKAGE

Features:• Allows pressure relief valve or pressure switch to be mounted in the well• System drain valve may be located in the well; check local codes• PA option is 1/2” tapping on back of 1” brass insert• Use with pressure tranducers

• NOTE: Used on 1” discharge adapters in 5” casing or larger.


928005 PSP See separateprice list

• PSP package includes 1/4” x 9’ coiled hose, 1/4” x 1/2” brass bushing, pulsation plug, and two stainless steel brackets for mounting pressure switch in the well

NOTE: It is the customer’s responsibility for ordering proper product to meet local, state and federal code regulations.

PSP

5J1-PA

LD-S-10 PA


928010 CG See separateprice list

TORCH CUTTING GUIDE:For ease of installation of Model J or JC Pitless Adapter. Please specify casing O.D. and discharge size when ordering

CG


TM ALUMINUM WELL CAPS

DICK

EN A

LUMI

NUM

WEL

L CA

PS

PartNumber Model

I.D. Casing Size (In.)

O.D. Casing Size (In). Conduit Fitting

Shipping Weight (Lbs.)

Qty./Carton

List PriceEach

952800952802952804952806952805952812952824952808952810952813

WTCC-4WTCC-5

WTCC-5.6WTCC-6WTCC-6WTCC-6

WTCC-6LC* WTCC-6.6WTCC-8WTCC-8

45

5-5/86666

6-5/888

4-1/25-9/16

66-5/86-5/86-5/86-5/8

78-5/88-5/8

1” NPT1” NPT1” NPT1” NPT

1-1/4” NPT1-1/2” NPT

1” NPT1-1/4” NPT1-1/4” NPT1-1/2” NPT

2.73.03.23.53.53.54.13.74.05.0

201815151515

IND.1088

See separate

pricelist

WTCC-Style CAST ALUMINUMFeatures:• WTCC caps Water Systems Council - PAS-2 listed• Cast aluminum with stainless steel bolts• WTCC models are vented to meet state codes• Can be personalized, 50 piece minimum• Five bolt pulldown for sure seal and tamper resistance• Heavy Buna-N Seal prevents foreign matter intrusion• Buna-N rubber seal is internal to cap assembly and is not exposed to outside environment

• NOTE: WTCC-6LC is locking.

PartNumber Model


Weight (Lbs.)

List PriceEach

952848952849

10AWT12AWT

10-3/412-3/4

2 NPT2 NPT

9.011.0


AWT-Style

PartNumber Model


O.D. Casing Size (In).


Qty./Carton

List PriceEach

952814952816

WTTC 5 CL WTTC 6 CL

56

5-9/166-5/8

3.03.5

1815


WTCC - Style CHLORINE CAPFeatures:• Tapped 1 1/4” NPT to accommodate pellet chlorinators

PartNumber Model




Qty./Carton

List PriceEach

952902952906952908952910

WTCI-5WTCI-6

WTCI-6.6WTCI-8

56

6-5/88

5-9/166-5/8

78-5/8

1” NPT1” NPT

1 1/4” NPT1 1/4” NPT

4.65.15.220.2

1815108

See separate

pricelist

WTCCI - Style CAST IRONFeatures:• WTCCI Caps Water Systems Council - PAS-97 (04) listed• Cast iron with stainless steel bolts• WTCCI models are vented to meet state codes• Five bolt pulldown for sure seal and tamper resistance• Heavy Buna-N Seal prevents foreign matter intrusion• Buna-N rubber seal is internal to cap assembly and is not exposed to outside environment• Equipped with an ultra flexible 6” grounding connector 12 AWG, UL486A and

UL486Clisted and tested to CSA standards


TM ALUMINUM WELL CAPS

MAASS™ THERMOPLASTIC/ABS WELL CAPS

PartNumber Model



ConduitFitting


Qty./Carton

List PriceEach

952920952925952930

SCP4SCP5SCP6

456

4 1/25 9/166 5/8

1” NPT1” NPT1” NPT

.881.31.5

111

See separate

pricelist

SCP-StyleFeatures: • SCP caps Water Systems Council PAS-2 listed• Gasket to prevent foreign intrusion• When cap top removed - wire completely exposed for easy service• Stainless steel nuts and bolts• Downward facing stainless steel vent• ABS bottom, can be solvent welded to PVC casing

PartNumber Model




Qty./Carton

List PriceEach

952700952702952704952706952708952710952712952714

CC-4CC-4.5CC-5CC-56CC-6CC-66CC-8CC-10

44-1/2

55-5/8

66-5/8

810

4-1/25

5-9/166

6-5/87

8-5/810-3/4

1.21.31.71.751.42.02.84.1

362920212118128


CC-StyleFeatures: • Can be personalized, 50 piece minimum• Cast aluminum alloy 319 - will not crack or warp• Fitted for 1”conduit• Three square head stainless steel cup point set screws• Designed for 1/64” clearance fit to prevent foreign matter intrusion• Model CC-ID cap 1-1/4” conduit as standard

PartNumber Model




Qty./Carton

List PriceEach

952600952602

952604

952606952608952610952612

PC-4PC-5

PC-566 (2-step) PC-66PC-8PC-10PC-12

45

5-5/8 upper6 lower

6-5/881012

4-1/25-9/16

66-5/8

78-5/810-3/412-3/4

.71.75

1.8

2.22.83.55.3

3622

21

211284


PC-StyleFeatures: • Cast aluminum alloy 319 - will not crack or warp• Square head zinc plated steel cup point set screw

PartNumber Model


Weight (Lbs.)

List PriceEach

952748952750

10S12S

10-3/412-3/4

5.758.6


MAASS™ SUBMERSIBLE WELL CAPSFeatures: • Heavy duty cast aluminum - will not crack or warp• Stainless steel set screws

• NOTE: Locking well caps illustrated on page 73.

MAASS/DICKENS ALUMINUM & PLASTIC W

ELL CAPS


POND

/IRRI

GATI

ON F

ILTER

S

POND/IRRIGATION FILTERSFeatures:• Effective means of keeping algae and seaweed out of pumping system• Manufactured from heavy PVC and plastic• 2” suction connectors• Outside screen used 1/4” holes• 2” PVC check valves as standard• Area between screens filled with bulk fish-safe filter mating• Can be manifolded to increase capacity• Irregular 3/8” or larger pea gravel can also be used as filter media

Part Number Model GPM Screen O.D. Inner Screen Weight Ea. (Lbs.) List Price

940185940186

40 G80 G

40 Gal.80 Gal.

6”12”

2”6”

717


Note: Filter stands are also available


STRAINERS

STRAINERS/FLOWSLEEVE

SUBMERSIBLE PUMP STRAINERFeatures: • Protect submersible pump from costly sand damage• Bottom cap manufactured from FDA approved plastic• Stainless steel standard• Seams are spot-welded

Part Number Size (in. X ft.) Gauze Weight (Lbs.) List Price915620915622915630915632915641915642915638915639

3 x 23 x 23 x 43 x 44 x 44 x 44 x 64 x 6

80100801008010080100

1.41.42.32.33.23.25.25.2


• Please specify pump manufacture when ordering 3” pump strainers• 3” size fits 4” I.D. casing• 4” size fits 4 1/2” I.D. or larger casing

FEMALE SUCTION PIPE STRAINERFeatures: • Wire wound stainless steel strainer

Part Number Model Slot Size Pipe Size Weight (Lbs.) List Price

923202 1024 10 2 2.1 See separateprice list

FLOWSLEEVEFeatures:• An efficient pump cooling system at an economical cost• Quick and easy installation• Recommended for longer life• Directs flow over motor, properly cooling motor• Easy to assemble using standard schedule 40 PVC pipe• Excellent for storage tanks, ponds, cisterns and water well aeration systems

Part Number Description List Price962500962510962520962530962550

4” Flowsleeve - 1” Discharge4” Flowsleeve - 1-1/4” Discharge4” Flowsleeve - 1-1/2” Discharge

4” Flowsleeve - 2” DischargePond and Lake Pump Mounting Stand - keeps pump off lake bottom


1536-S


GEOTHERMAL PRODUCTS

GEOT

HERM

AL P

RODU

CTS

MODEL JXX - PITLESS BURY UNITSFeatures:• Designed to accommodate two pumps in one well casing• Excellent for geothermal closed systems• Can be used for one pump and one return pipe well• Available with male threaded end or plain end for welding• Standard 18” minimum overall length

Part Number Model Number Well Casing Size Water Outlet & Drop Pipe Size List Price Each

926415926435926440926460926475926485

5JXX-16JXX-1

6JXX-1 1/48JXX-18JXX-210JXX-2

5668810

11

1-1/4122


SURE CLIP LLC GEOTHERMAL PIPE SPACERSFeatures:• Increases vertical bore heat exchange by 35%• Anti-catch design allows the tremie to be extracted without a snag• Patent pending• Made in the USA• Recommended spacing: Per every 8’ tremie pipe

“DOG BONE” SPACER

Part Number Model Number Pipe Size SDR11 Minimum Bore Diameter List Price Each

933300933302933304

GSC-75-2GSC-100-2GSC-125-2

3/4”1”

1-1/4”

5.50”5.50”6.00”


Part Number Model Number Pipe Size SDR11 Minimum Bore Diameter List Price Each

933306933308

GSC-75-4GSC-100-4

3/4”1”

5.50”6.00”


“QUAD BONE” SPACER

GEOTHERMAL BRASS ELBOWFeatures• 1” X 1” Elbow• One port male X sweat combination• Tapped 1/4” for heat pump sensor

Part Number IPS X IPS Quantity per Carton Weight per Carton List Price Each

406502 1” X 1” 10 7.5 See separateprice list


SEDIMENT FILTERSREPAIR PARTS

SEDIMENT FILTERSSPINDOWN™ MODEL

Features:• PVC body• Ball valve for flushing sand and sediment• Polyester filter screen is reusable• Sand and sediment is visible through clear reservoir• Maximum operating pressure 150 psi at 73° F• Individually boxed

Part Number

Model Number Pipe Size Mesh Length Width

List Price Each

962002962004962006962008962010962012962014962020962022962024962026962028962030962032962038962040962042962044962046962048962050962056962058962060962062962064962066962068

3/4-24F3/4-30F3/4-40F3/4-60F3/4-100F3/4-140F3/4-250F

1-24F1-30F1-40F1-60F1-100F1-140F1-250F

1-1/2-24F1-1/2-30F1-1/2-40F1-1/2-60F1-1/2-100F1-1/2-140F1-1/2-250F

2-24F2-30F2-40F2-60F2-100F2-140F2-250F

3/4”3/4”3/4”3/4”3/4”3/4”3/4”

1” slip1” slip1” slip1” slip1” slip1” slip1” slip

1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip


24304060100140250243040601001402502430406010014025024304060100140250

11-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/8

1515151515151518181818181818

7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”

5”5”5”5”5”5”5”

5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”


SPINDOWN™ MODEL

Part Number Model Number Size (Inches) List Price Each

962300962302962306962308962310962312962318962320962324962326962328962330962336962338962342962344962346962348

NT30SC24NT30SC30NT30SC60NT30SC100NT30SC140NT30SC250NT60SC24NT60SC30NT60SC60NT60SC100NT60SC140NT60SC250NT120SC24NT120SC30NT120SC60NT120SC100NT120SC140NT120SC250

3/4 and 13/4 and 13/4 and 13/4 and 13/4 and 13/4 and 1

1-1/21-1/21-1/21-1/21-1/21-1/2

222222


REPAIR PARTSPOLYESTER FILTER ELEMENTS

• Repair parts replace RuscoTM filters parts


SEDIMENT FILTERS

SEDI

MENT

FILT

ERS

REPA

IR P

ARTS

SPINDOWN™ SEDIMENT TRAPPER MODELFeatures:• Centrifuge spin sown action removes sand and coarse sediment• Several mesh sizes available• Polyester filter screens are replaceable• Sediment is easily removed by opening ball valve at bottom of filter• Hand tighten only -- use of tools voids warranty• Sand and sediment is visible through clear reservoir

Part Number Model Number Pipe Size Mesh Length Width List Price Each962100962102962104962106962108962110962112962118962120962122962124962126962128962130962140962142962144962146962148962150962152962160962162962164962166962168962170962172

3/4-24STF3/4-30STF3/4-40STF3/4-60STF3/4-100STF3/4-140STF3/4-250STF

1-24STF1-30STF1-40STF1-60STF1-100STF1-140STF1-250STF

1-1/2-24STF1-1/2-30STF1-1/2-40STF1-1/2-60STF1-1/2-100STF1-1/2-140STF1-1/2-250STF

2-24STF2-30STF2-40STF2-60STF2-100STF2-140STF2-250STF

3/4”3/4”3/4”3/4”3/4”3/4”3/4”


1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip


24304060100140250243040601001402502430406010014025024304060100140250

14-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/2

1515151515151518181818181818

7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”

5”5”5”5”5”5”5”

5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”


SEDIMENT TRAPPER MODELPart Number Model Number Size (Inches) List Price Each

962360962362962366962368962370962372962378962380962382962384962386962390962400962402962406962408962410962412

NT1SC24NT1SC30NT1SC60NT1SC100NT1SC140NT1SC250NT1.5SC24NT1.5SC30NT1.5SC60NT1.5SC100NT1.5SC140NT1.5SC250

NT2SC24NT2SC30NT2SC60NT2SC100NT2SC140NT2SC250

3/4 and 13/4 and 13/4 and 13/4 and 13/4 and 13/4 and 1

1-1/21-1/21-1/21-1/21-1/21-1/2

222222


POLYESTER FILTER ELEMENTS

• Repair parts replace RuscoTM filters parts

REPAIR PARTS


Part Number Model Number Description Size (Inches) List Price Each962250962252962254962256962258962260962262962270962276962278962280

PVNT30BNT60BNT120BNT30CNT60CNT120CNT1CNT30SNT60SNT120S

Purge ValveFilter BodyFilter BodyFilter Body

Filter Cover - SpindownTM ModelFilter Cover - SpindownTM ModelFilter Cover - SpindownTM Model

Filter Cover - Trapper Model“O” Ring Trapper & SpindownTM“O” Ring Trapper & SpindownTM“O” Ring Trapper & SpindownTM

1/2 FPT1”

1-1/2”2”

3/4” TO 1”1-1/2”

2”1”1”

1-1/2”2”

See separateprice listREPAIR PARTS

TRI-SEAL/K-PACKER

REPAIR PARTS

Flow

Rat

e G

PM

120

100

80

60

40

20

0

2”

1-1/2”

1”

1 2 3 4 5 6 7 8 9 10PSI Loss

Inlet/Outlet Flow Rate 1” 1” 1 - 25 Gpm 1 1/2” 10 - 50 Gpm 2” 20 - 100 Gpm

Mesh Opening Microns24304060100140

.028

.021

.015

.010

.006

.004

711533381254152104

MESH CONVERSION CHART


SANDBLOCKERTM II WELL SCREENS

SAND

BLOC

K W

ELL

SCRE

ENS

Patent No. 5,833,853 | New Innovation in Sand Retention

• Features:• Large inflow area of 32%, providing twice the flow of wire wrap screens• Rugged design, strongest stainless steel screen in market today• One size fits all, from comparible slot size of 3 and larger• Resistant to plugging and errosion, pore size distribution replicates sand size distribution• Gravel pack not required• Stainless steel construction throughout

Part Number Size Screen O.D. Screen Length List Price Each

916800-3916802-4

1-1/4”2”

1.752.50

36”48”


TRANSMITTING CAPACITYGallons per Minute per Foot of Screen at 0.1 foot per second

Screen Pipe Size (Inches) GPM/FT

23456

812162125

STAINLESS STEEL DRIVE POINTS | MALE X POINT

PIPE SIZE 2” NPT MALE X FEMALEPart Number Size Screen O.D. Screen Length List Price Each916810-3916812-4

1-1/4”2”

1.752.50

36”48” See separate price list

SANDBLOCKER™ II WELL SCREENSSTAINLESS STEEL EXTENSIONS

Note: Male x Male, Female x Female and ASTM Flush Fitting available.

WELL SCREENSPIPE SIZE 2” NPT MALE X FEMALE

Part Number Size Screen O.D. Screen Length List Price Each

916813-5 3” 3.50 5’ See separate price list

PIPE SIZE 3” NPT FEMALE X FEMALE


PIPE SIZE 3” NPT MALE X PLATE BOTTOM


PIPE SIZE 4” NPT FEMALE X PLATE BOTTOM


PIPE SIZE 4” NPT MALE X FEMALE




PIPE SIZE 5” WELD RING X WELD RING




PIPE SIZE 6” WELD RING X WELD RING


Note: • Longer screen lengths available by splicing various

standard lengths together.


DRIVE WELL POINTS

FLUSH WELL POINTS

DRIVE WELL POINTSMIDWEST WELD PROCESS WELL POINT

Features:• Rugged design with octagonal ductile iron head to prohibit turning in tough driving• Easily extended in the field by removing head and coupling together with second well

point for added capacity• Bronze MIG weld top and bottom to prohibit jacket shift or peeling• 3/16” diameter spotweld on 1” centers to prevent seam opening• Stainless steel with 1/8” staggered perforations for maximum open area• Available in 50-60-80-100 mesh stainless steel for long life screening• Other custom lengths and styles available• Lead Free: ≤ .025% Lead Content

Part Number Model Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)

List Price Each

915698915702915716915720915734915738915752915756915770915774915788915792915834915838915852915856915870915874915888915892

SS90SS90SS94SS94SS98SS98SS100SS100SS102SS102SS110SS110SS164SS164SS168SS168SS172SS172SS176SS176

6080608060806080608060806080608060806080

1-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/4

22222222

24 x 1824 x 1830 x 2430 x 2436 x 3036 x 3042 x 3642 x 3648 x 4248 x 4260 x 5460 x 5430 x 2430 x 2436 x 3036 x 3048 x 4248 x 4260 x 5460 x 54

6677881010111113131212141418182222


STAINLESS STEEL

OPEN END WELL SCREENFeatures:• Use when jetting or washing down wells using a sand shark or backwash valve• Provides additional capacity when coupled with a well point

Part Number Model Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)

List Price Each

916345916348916400916404916406

SS99SS103SS169SS173SS177

6060606060

1-1/41-1/4

222

36 x 3048 x 4236 x 3048 x 4260 x 54

7101115

17.8


FLUSH WELL POINTSFeatures:• 1-1/4” flush point fits in 2” well and will pass through 2” closed pattern drive shoe• SS - Stainless steel• Used in tubular drilled wells

Part Number Trade Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)

List Price Each

916064916068916088916092916142916146916160916164916196916200

SS121SS121SS125SS125SS129SS129

SS131.5SS131.5SS570SS570

60806080608060806080

1-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/4

36 x 3036 x 3042 x 3642 x 3648 x 4248 x 4254 x 4854 x 4860 x 5460 x 54

991010111113131414



WASHER WELL POINTS

WAS

HER

WEL

L PO

INTS

WEL

L PO

INT A

CCES

SORI

ES

Features:• For use in ground with sharp stones or rocks• Drilled and countersunk holes are covered with wire cloth and held in place by washers.

Part Number Trade Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)

List Price Each

916460916462916482916486916500916504916518916522916594916598916612916616

SS301SS301SS302SS302SS303SS303SS305SS305SS325SS325SS327SS327

608060806080608060806080

1-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/4

2222

242430303636484836364848

667788111113131616


STAINLESS STEEL MONITOR POINTFeatures:• Stainless steel tubing and point can be fabricated to provide an excellent aid for monitoring• Minimum quantity of twelve units required• Refer to page 73 for monitoring points

WELL POINT ACCESSORIES

Part Number Pipe Size (Inches) Approx. Weight (Lbs.) Quantity Per Box List Price Each941574941576

1-1/42

1.01.5

2515


USA MADE DRIVE COUPLINGS GALVANIZED

Part Number Pipe Size (Inches) Approx. Weight (Lbs.) Quantity Per Box List Price Each930562930568

1-1/42

1.53.25

2510


DRIVE CAPS MALLEABLE

Part Number Pipe Size (Inches) Approx. Weight (Lbs.) List Price Each922804922810

1-1/42

.60

.75See separate

price list

BACKWASH VALVESFeatures:• No lead brass: ≤ .025% Lead Content• Stainless steel spring and ballcheck

Part Number Valve Size (Inches)Pressure Pipe Tap

(Inches) ThreadsApprox. Weight

(Lbs.) List Price Each

930141 2 NPT Male 1 NPS Left Hand 2.0 See separateprice list

“SAND SHARK” BACKWASH VALVESFeatures:• Cast iron housing

810

9

618

800


WELL SEAL ACCESSORIES

WELL SEALS

WELL SEAL ACCESSORIES

Part Number Diameter Length Thread Size List Price 930632930634

7/8”1-1/4”

2”2-9/32”

1/2” NPT3/4” NPT


COPPER WELL SEAL AIR VENTFeatures:• Vermin proof• Fabricated from copper• Low profile

Part Number Diameter Length Thread Size List Price 930630 1 5-1/2” 1/2” NPT See separate price list

PVC WELL SEAL AIR VENTFeatures:• Fits most solid or split top well seals• Slotted area provides vermin proof protection• Manufactured from rugged PVC

Part Number O.A. Length Vent Height Thread Size Weight List Price 934634934636

13”17”

8”12”

1/2” NPT1/2” NPT

1.351.10


STEEL WELL SEAL AIR VENTFeatures:• Fabricated from 1/2” heavy duty galvanized steel• Brass and stainless steel 24 mesh screen

WELL SEALSSINGLE PIPE WELL SEALS - SPLIT TOP

Features:• Split cast iron top for ease of installation• Cable seal kit included• 6” seal and above has 1” cable hole• Vent opening 1/2” NPT• 4” and 5” seals have 3/4” cable hole

Part Number Model Number Size Casing I.D.I.D. X Drop Pipe Hole LocationWeight (Lbs.)

List Price Each

930647930650930656930713930716930720930755930757930782930785930789930809930811930815930850930852930856930858930860

459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S

4 x 14 x 1-1/4

4 x 25 x 1

5 x 1-1/45 x 2

5-5/8 x 15-5/8 x 1-1/4

6 x 16 x 1-1/4

6 x 26 -/4 x 1

6-1/4 x 1-1/46-1/4 x 2

8 x 18 x 1-1/4

8 x 28 x 38 x 4

OffsetOffsetOffsetCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenter

3.93.22.76.45.74.98.16.99.99.77.77.58.17.817.317.416.114.111.7


459S

Note: 3/4” can be used on 8” or larger well seal


WELL SEALS

WEL

L SE

ALS

Part Number Model Number Size Casing I.D.I.D. X Drop Pipe Hole LocatonWeight (Lbs.)

List Price Each

931297

931300

359

359

2 x 1

2 x 1-1/4

Center

Center

2.5

2.3See separate

price list

SINGLE PIPE WELL SEALSFeatures:

• One piece cast iron top

• Provided with optional pointed set screws for threaded pipe

Part Number Model Number Size Casing I.D.I.D. X Drop PipeWeight (Lbs.)

List Price Each

950004

950006

950015

950031

950033

559

559

559

559

559

4 x 1-1/4 x 1

4 x 1-1/4 x 1-1/4

5 x 1-1/4 x 1

6 x 1-1/4 x 1

6 x 1-1/4 x 1-1/4

3.0

3.0

5.0

9.0

9.0


DOUBLE PIPE WELL SEALS - SPLIT TOPFeatures:

• Two piece cast iron top

SINGLE PIPE WELL SEALS - SOLID TOPFeatures:

• One piece cast iron top meets Wisconsin State Code

• Cable seal kit included

• Vent opening 1/2” NPT

• 6” seal has 1” cable hole

Part Number Model Number Size Casing I.D.I.D. X Drop Pipe Hole LocationWeight (Lbs.)

List Price Each

930640

930654

931259

931269

931651

931275

931278

931282

459W

459W

459W

459W

459W

459W

459W

459W

4 x Blank

4 x 1

4 x 1

5 x 1

6 x 0

6 x 1

6 x 1-1/4

6 x 2

Blank

Center

Offset

Center

None

Center

Center

Center

4.0

3.9

3.8

6.5

8.7

8.6

8.5

7.5


459W

359


Part Number Model Number Size Casing I.D.I.D. X Drop PipeTop Plate Thickness

Working Load (Lbs.)

Weight (Lbs.)

List Price Each

954010954011954012954013954004954005954006954007954015954016954017954018954020954021954022954023954024954025954026954027954029954030954031954032954033954036954037954038954039954040954041954042954045954046954047954048954049954050954051954052954053954054954055954056954057954058954059954060954061954062954070954071954072954073954074954075954076954077954080954081

WS41WS41.25WS41.5WS42

WS5OD1WS5OD1.25

WS6OD1WS6OD1.25

WS51WS51.25WS51.5WS52WS61

WS61.25WS61.5WS62

WS62.5WS63

WS6 1/4 x 1WS6 1/4 x 1.25

WS6 1/4 x 2WS71

WS71.25WS71.5WS72WS81

WS81.25WS81.5WS82

WS8.25WS83WS84WS101

WS101.25WS101.5WS102

WS102.5WS103WS104WS105WS106WS121

WS121.25WS121.5WS122

WS122.5WS123WS124WS125WS126

WS141.25WS141.5WS142

WS142.5WS143WS144WS145WS146WS164WS166

4” to 4 -/4” x 1”4” to 4-1/4” x 1-1/4”4” to 4-1/4” x 1-1/2”

4” to 4-1/4” x 2”4-1/2” to 4-3/4” x 1”

4-1/2” to 4-3/4” x 1-1/4”5-3/16” to 5-7/16” x 1”

5-3/16” to 5-7/16” x 1-1/4”5” to 5-1/4” x 1”

5” to 5-1/4” x 1-1/4”5” to 5-1/4” x 1-1/2”

5” to 5-1/4” x 2”5-3/4” to 6-1/4” x 1”

5-3/4” to 6-1/4” x 1-1/4”5-3/4” to 6-1/4” x 1-1/2”

5-3/4” to 6-1/4” x 2”5-3/4” to 6-1/4” x 2-1/2”

5-3/4” to 6-1/4” x 3”5-3/4” to 6-1/4” x 1”

5 -/4” to 6-1/4” x 1-1/4”5-3/4” to 6-1/4” x 2”6-5/8” to 7-1/4” x 1”

6-5/8” to 7-1/4” x 1-1/4”6-5/8” to 7-1/4” x 1-1/2”

6-5/8” to 7-1/4” x 2”7-3/4” to 8-1/4” x 1”

7-3/4” to 8-1/4” x 1-1/4”7-3/4” to 8-1/4” x 1-1/2”

7-3/4” to 8-1/4” x 2”7-3/4” to 8-1/4” x 2-1/2”

7-3/4” to 8-1/4” x 3”7-3/4” to 8-1/4” x 4”9-3/4” to 10-1/4” x 1”

9-3/4” to 10-1/4” x 1-1/4”9-3/4” to 10-1/4” x 1-1/2”

9-3/4” to 10-1/4” x 2”9-3/4” to 10-1/4” x 2-1/2”

9-3/4” to 10-1/4” x 3”9-3/4” to 10-1/4” x 4”9-3/4” to 10-1/4” x 5”9-3/4” to 10-1/4” x 6”11-3/4” to 12-1/4” x 1”

11-3/4” to 12-1/4” x 1-1/4”11-3/4” to 12-1/4” x 1-1/2”

11-3/4” to 12-1/4” x 2”11-3/4” to 12-1/4” x 2-1/2”

11-3/4” to 12-1/4” x 3”11-3/4” to 12-1/4” x 4”11-3/4” to 12-1/4” x 5”11-3/4” to 12-1/4” x 6”13 1/4” to 14” x 1 1/4”13 1/4” to 14” x 1 1/2”

13 1/4” to 14” x 2”13 1/4” to 14” x 2 1/2”

13 1/4” to 14” x 3”13 1/4” to 14” x 4”13 1/4” to 14” x 5”13 1/4” to 14” x 6”15 1/4” to 16” x 4”15 1/4” to 16” x 6”

3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/8”3/8”3/16”3/16”3/16”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”3/8”1/2”5/8”3/8”3/8”3/8”3/8”1/2”5/8”5/8”3/4”3/4”1/4”3/8”3/8”1/2”1/2”5/8”5/8”3/4”3/4”3/8”1/2”1/2”1/2”5/8”3/4”3/4”1”

3/4”1”

2,1412,1412,1412,1411,5201,5201,5201,5201,4501,4501,4501,4501,1001,1001,1001,1009,1709,1701,1501,1501,1502,0002,0002,0002,0001,6501,6501,6501,6506,9009,00022,5003,7003,7003,7003,7008,60016,20016,20030,00030,000

8852,8702,8706,6006,60012,00012,00020,50021,0002,2804,8504,8504,8509,45016,00016,00038,00012,50030,000

1.801.761.651.552.652.352.902.902.702.402.552.853.603.603.353.354.705.003.603.603.355.455.655.405.307.457.306.756.908.357.509.6011.7511.9515.0514.7017.1519.5517.6517.5015.1026.0026.0026.0026.0026.0026.0026.0026.0026.00

40494847545967678091


PACIFIC HYDRO™ STEEL SANITARY WELL SEALSFeatures:• Made from high strength steel• Steel plates powder coated for durable finish• Utilizes soft poly-vinyl packers• Unique packer design allows for wide range of casing sizes• Bolts and washers zinc plated• 1” threaded wire drop hole standard on most well seals• 1-1/4” threaded wire drop holes standard on 10” and larger seals• Vent opening 1/2” on 4” to 7” well seals• Vent opening 3/4” on 8” well seals and larger• Additional eye bolt availableW

ELL SEALS

WELL SEALS

• NOTE:• Custom sizes available. Contact factory for quotation.• Also available manufactured from stainless steel.


WELL SEALS

WEL

L SE

ALS


Working Load (Lbs.)

Weight (Lbs.)

List Price Each

954311954312954313954320954321954322954323954326954327954328954329954330954331954332954333954336954337954338954339

WS51.25WS51.5WS52

WS61 X 3/8”WS61.25 X 3/8”WS61.5 X 3/8”WS62 X 3/8”

WS6.4.1 X 3/8”WS6.4.125 X 3/8”WS6.4.15 X 3/8”WS6.4.2 X 3/8”WS71 X 3/8”

WS71.25 X 3/8”WS71.5 X 3/8”WS72 X 3/8”WS81 X 3/8”

WS81.25 X 3/8”WS81.5 X 3/8”WS82X 3/8”

5” to 5-1/4” x 1-1/4”5” to 5-1/4” x 1-1/2”

5” to 5-1/4” x 2”5-3/4” to 6-1/4” x 1”

5-3/4” to 6-1/4” x 1-1/4”5-3/4” to 6-1/4” x 1-1/2”

5-3/4” to 6-1/4” x 2”6-1/4” to 6-1/2” x 1”

6-1/4” to 6-1/2” x 1-1/4”6-1/4” to 6-1/2” x 1-1/2”

6-1/4” to 6-1/2” x 2”6-5/8” to 7-1/4” x 1”

6-5/8” to 7-1/4” x 1-1/4”6-5/8” to 7-1/4” x 1-1/2”

6-5/8” to 7-1/4” x 2”7-3/4” to 8-1/4” x 1”

7-3/4” to 8-1/4” x 1-1/4”7-3/4” to 8-1/4” x 1-1/2”

7-3/4” to 8-1/4” x 2”

3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”

9,1709,1709,1709,1009,1009,1009,1009,0009,0009,0009,0008,9008,9008,9008,9007,0207,0207,0207,020

3.353.353.35

4444444444444444


SUPER WELL SEALS• 3/8” Thick Steel Top Plate


Working Load (Lbs.)

Weight (Lbs.)

List Price Each

954223954224954225954239954240954241954242954248954249954250954259954260

WS62WS62.5WS63WS82

WS82.5WS83WS84WS102

WS102.5WS103WS123WS124

5-3/4” to 6-1/4” x 2”5-3/4” to 6-1/4” x 2-1/2”

5-3/4” to 6-1/4” x 3”7-3/4” to 8-1/4” x 2”

7-3/4” to 8-1/4” x 2-1/2”7-3/4” to 8-1/4” x 3”7-3/4” to 8-1/4” x 4”9-3/4” to 10-1/4” x 2”

9-3/4” to 10-1/4” x 2-1/2”9-3/4” to 10-1/4” x 3”11-3/4” to 12-1/4” x 3”11-3/4” to 12-1/4” x 4”

1/2”1/2”5/8”5/8”3/4”3/4”1”

5/8”3/4”1”1”1”

92509250

17,00016,50033,00033,00038,00016,00031,00039,00033,00033,000

5.55.45.89.015.012.8513.518.027.425.936.534.2


PACIFIC HYDRO™ STEEL THICKER TOP PLATE SANITARY WELL “SUPER SEALS”

• Custom sizes available. Contact factory for quotation. Also available manufactured from stainless steel.

Part Number Model Number Size Casing I.D.I.D. X Drop PipeWeight (Lbs.)

List Price Each

954100954101954102954105954107954110954111954112954114954116954120954123954124954125954126

JS41.75JS41.1

JS41.25.1JS51.25.1

JS51.5.1.25JS61.1

JS61.25.1JS611.251.25

JS61.5.1JS61.5.1.25JS71.25.1JS81.25.1

JS81.25.1.25JS81.5.1.25JS81.5.1.5

4” to 4-1/4” x 1” x 3/4”4” to 4-1/4” x 1” x 1”

4” to 4-1/4” x 1-1/4” x 1”5” to 5-1/4” x 1-1/4” x 1”

5” to 5-1/4” x 1-1/2” x 1-1/4”5-3/4” to 6-1/4” x 1” x 1”

5-3/4” to 6-1/4” x 1-1/4” x 1”5-3/4” to 6-1/4” x 1-1/4” x 1-1/4”

5-3/4” to 6-1/4” x 1/2” x 1”5-3/4” to 6-1/4” x 1-1/2” x 1-1/4”

6-5/8” to 7-1/4” x 1-1/4” x 1”7-3/4” to 8-1/4” x 1-1/4” x1”

7-3/4” to 8-1/4” x 1-1/4” x1-1/4”7-3/4” to 8-1/4” x 1-1/2” x1-1/4”7-3/4” to 8-1/4” x 1-1/2” x1-1/2”

222334444458488


PACIFIC HYDRO™ STEEL JET WELL SEALS

• Custom sizes available. Contact factory for quotation. Also available manufactured from stainless steel.


WELL SEALS

MISCELLANEOUS

WELL SEALS

Part Number Model Number Size CasingO.D. X Drop PipeTop Plate Thickness

Working Load (Lbs.)

Weight (Lbs.)

List Price Each

952620952622952626

OTT4.1OTT4.1-1/4OTT4.1.2

4-1/2” X 1”4-1/2” X 1-1/4”

4-1/2” X 2” Offset

3/4”3/4”3/4”

6,0006,0006,000

0.90.91.0


OVER THE TOP CAST IRON SANITARY WELL SEALS• Three stainless steel cup point set screws• Seals have 1/2” vent hole as standard• Positive Buna-N-Seal

Part Number Model Number Size CasingO.D. X Drop PipeTop Plate Thickness

Working Load (Lbs.)

Weight (Lbs.)

List Price Each

952640952642952644952646952650952652952654952656952660952662952664952666

OTT67.1OTT67.1 1/4” OTT67.1 1/2”

OTT67.2OTT8.1

OTT8.1 1/4”OTT8.1 1/2”

OTT8.2OTT10.1

OTT10.1 1/4” OTT10.1 1/2”

OTT10.2

6-5/8” -7” x 1”6-5/8” -7” x 1-1/4”6-5/8” -7” x 1-1/2”

6-5/8” -7” x 2”8-5/8” x 1”

8-5/8” x 1-1/4”8-5/8” x 1-1/2”

8-5/8” x 2”10-3/4” x 1”

10-3/4” x 1-1/4”10-3/4” x 1-1/2”

10-3/4” x 2”

1”1”1”1”

1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”

24,00024,00024,00024,00026,00026,00026,00026,00030,00030,00030,00030,000

3.03.03.03.05.25.25.25.28.38.38.28.2


OVER THE TOP ALUMINUM SANITARY WELL SEALSFeatures:• Cast Aluminum Alloy 319 — will not warp or crack• Three square head stainless steel cup point set screws• Seals have 1/2” vent hole as standard• Machined drop pipe seat with positive Buna-N-Seal

MISCELLANEOUS

Part Number Weight Per Can Standard Pkg. Quantity List Price Each

927650 12 oz. 12 cans See separate price list

BLACK FLAG™ WASP AND HORNET KILLERFeatures: • Powerful 15’ stream• Non-conductive• Kills on contact• EPA registered all 50 states

Part Number Quantity Weight (Oz.) List Price Each

927785 IND. 12 See separate price list

PLASTIC PAIL OPENERFeatures:• Lightweight aluminum design• Equipped with hammer face to re-attach lid• Opens 1, 2, 3 1/2 and 5 gallon plastic pail


PRESSURE GAUGES

Part Number

Diameter (Inches)

Pressure Range (PSI)

Pressure Connection (Ins.)

Approx. Weight (Lbs.) List Price Each

940069 2 0-100# 1/4 .4 See separate price list

Features:• Ametek• With steel case/brass stem, 1/8” orifice• Imported

Part Number

Diameter (Inches)




940070940068

22

0-100#0-200#

1/41/4

.4

.4See separate

price list

2” LIQUID FILLED BACK MOUNTED GAUGESFeatures:• Lead free (≤ 0.25% lead content)• Stainless steel case• Imported• Liquid filled to reduce vibrations• Brass stem

Part Number

Diameter (Inches)




940071940072

22

0-100#0-200#

1/41/4

.4

.4See separate

price list

BACK MOUNTED GAUGES

Part Number

Diameter (Inches)




940191940193

22

0-100#0-200#

1/41/4

.4

.4See separate

price list

2 1/2” LIQUID FILLED BACK MOUNTED GAUGESFeatures:• Lead free (≤ 0.25% lead content)• Stainless steel case• Liquid filled to reduce vibrations• Imported

Part Number

Diameter (Inches)




940073940074

2-1/22-1/2

0-100#0-200#

1/41/4

.45

.45See separate

price list

Features:• Midwest Lead free (≤ 0.25% lead content)• With steel case/brass stem, 1/8” orifice

2” LIQUID FILLED GAUGESFeatures:• Stainless steel case• Liquid filled to reduce vibrations• Lead free (≤ 0.25% lead content)• Brass stem• Imported

Part Number Model Number Diameter (Inches)Pressure

Range (PSI)Pressure

Connection (Ins.)Approx.

Weight (Lbs.)List Price

Each

940187940189

PGLF1002PGLF2002

22

0-100#0-200#

1/41/4

.4

.4See

separate price list

PRESSURE GAUGE LIQUID-FILLED MIDWEST - 2-1/2”Features:• Stainless steel case• Liquid filled to reduce vibrations• Lead free (≤ 0.25% lead content)• Brass stem• Imported


Range (PSI)Pressure



Each

940202940203

PHLF100PHLF200

2-1/2”2-1/2”

0-100#0-200#

1/41/4

.42

.42See

separate price list

PRES

SURE

GAU

GES


PRESSURE GAUGES

PRESSURE GAUGES

LIQUID FILLED GAUGESFeatures:• Stainless steel case• Lead free (≤ 0.25% lead content)• Brass stem• USA Made


Range (PSI)Pressure



Each940204940206940208940210940212940214940216940218940220940222940224940226940228940230940232940234940236

PGL30PGL60PGL100PGL160PGL200PGL300PGL400PGL600PGL1000PGL60PGL100PGL160PGL200PGL300PGL400PGL600PGL1000

2-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/2

44444444

0-30#0-60#0-100#0-160#0-200#0-300#0-400#0-600#0-1000#0-60#0-100#0-160#0-200#0-300#0-400#0-600#0-1000#

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

.50

.50

.50

.50

.50

.50

.50

.50

.50

.501.901.901.901.901.901.901.90


• NOTE: Other size pressure gauges on request

2-1/2” LIQUID FILLED BACK MOUNTED GAUGESFeatures:• Lead free (≤ 0.25% lead content)• Brass stem• Stainless steel case• USA made


Range (PSI)Pressure



Each940255940256940257940259940260940261940263

PGL30PGL60PGL100PGL200PGL300PGL400PGL1000

2-1/22-1/22-1/22-1/22-1/22-1/22-1/2

0-30#0-60#0-100#0-200#0-300#0-400#0-1000#

1/41/41/41/41/41/41/4

.50

.50

.50

.50

.50

.50

.50


2-1/2” LIQUID FILLED VACUUM GAUGESFeatures:• Stainless steel case• 1/4” bottom

Part Number Model Number Description List Price Each

940250 PGL-30 25.901 -30/+30 PSI See separate price list

4 1/2” WATER LEVEL GAUGEFeatures:• Used in conjuction with airline• Steel case• Adjustable dial to permit reading water level in feet• Phosphor bronze bourdon tube

CA566 Model Number Depth Range Connection (Inches)Approx. Weight

(Lbs.) List Price Each

940238 CA566 0-390 ft. 1/4 2.0 See separate price list

GAUGE PANEL MOUNTING CLAMPPart Number Description List Price Each

940242 Designed for back connecting gauges See separate price list

• NOTE: Other size pressure gauges on request

2” DRY GAUGE - BOTTOM MOUNT: MADE IN USAPart Number Description List Price Each

940160 0-100” See separate price list


ACCE

SSOR

IES

ACCESSORIESSQUARE D PRESSURE SWITCHES

Part Number Type


Description Pressure ConnectionApprox. Weight (Lbs.)

List Price Each

940024940032940026940133940134940135940023940054940028940055940130940034940025940030940031940029940136940137940138940139940140940141940022940056940057940058940059940039940041940040940042940045940046940047940048940043

FSG2FSG2FSG2

FSG2J2oMIFSG2J2oMIFSG2J2oMIFSG2MIPFSG2M4FSG2M4FSG2M4

FRG2FSG52J25FSG52J33

FSG2PFSG2PFSG2PFSW2FSW2FSW2GSWGSWGSW

Form PFSG-PC241

FYG2FYG2FYG2GSG2GSG2GSG2GSG2GHG2GHG2GHG2GHG2

GHG2R

20/4030/5040/6020/4030/5040/6030/5020/4030/5040/6050/3060/8050/7020/4030/5040/6020/4030/5040/6020/4030/5040/60

------

20/4030/5040/6020/4030/5040/6060/8030/5040/6060/8080/100100/80

Standard switchStandard switchStandard switchManual cut-offManual cut-offManual cut-off

Manual cut-off lever-P.PlugLow pressure cut-offLow pressure cut-offLow pressure cut-off

Reverse ActionHigher Cut In (max. 60 psi)Higher Cut In (max. 60 psi)

With Pulsation PlugWith Pulsation PlugWith Pulsation Plug

Corrosion Resistant NEMA3RCorrosion Resistant NEMA3RCorrosion Resistant NEMA3R

Heavy Duty Nema 4Heavy Duty Nema 4Heavy Duty Nema 4Nylon Pulsation Plug

Replacement Contact KitHigher HP. 80 PSIHigher HP. 80 PSIHigher HP. 80 PSI

Light Industrial-Air & WaterLight Industrial-Air & WaterLight Industrial-Air & WaterLight Industrial-Air & Water

Commercial Higher PressureCommercial Higher PressureCommercial Higher PressureCommercial Higher PressureReversing Higher Pressure

1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”

1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”

1.31.31.3222

1.51.51.51.51.31.31.31.31.31.3222

2.22.22.20.10.21.31.31.32222

2.22.22.22.22.2


• Lead Free: ≤ .025% Lead Content

SQUARE D FLOAT SWITCHES | Class 9036Part Number Type Description Approx. Weight

List Price Each

940142940143940146940147940148

DG2DG2RGG2

GG2RFG30

FloatFloatFloatFloatFloat

Close On Liquid RiseReversing Open On Liquid Rise

Close On Liquid RiseReversing Open On Liquid Rise

Close On Liquid Rise

22222


• Float not included

SQUARE D FLOAT SWITCHES | Class 9037

Part Number

Square D Part #

Float Positions from Front of Switch

Float Rod

Angle

Approx. Water Min.

Level Change

Max.Operations List Price Each

940060940062

9037HG339037HG34

RightLeft

4545

2”2”

5”5”

Close On Liquid RiseClose On Liquid Rise


• Note: • Other Square D switches, switch accessories, and pump safety switches available on request.• Float not included

SQUARE D GENERAL DUTY SAFETY SWITCHESPart

Number Type DescriptionPressure

ConnectionApprox. Weight

List Price Each

970001970002970005

D211N D211NRB

222N

Fusible GD 120/240V 30A 2P NEMA1 Fusible GD 120/240V 30A 2P NEMA3R Fusible GD 240V 60A 2P NEMA1

1/4”1/4”1/4”

.95 lbs.

.95 lbs.

.95 lbs.



ACCESSORIES

ACCESSORIES

ALDERON MECHANICAL PUMP SWITCHESFeatures:• 15 amp rating eliminates 1/2 horsepower float switches• Patented mechanicl design eliminates hazardous mecury• PVC float housing• Heavy duty cable, 14 gauge, 2 conducter cable• Omni-directional, not sensitive to rotation or turbulance• Adjustable pumping range• UL Listed

ALDERON SIMPLEX CONTROL AND ALARM PANELSFeatures:• Big switch control panel utilizes a pump switch and a control float activating

a high water alarm• Hand/off/auto• Alarm light• Alarm buzzer - auto reset• Green pump-run indicator light• NEMA 4X• UL Listed

ALDERON 7001 TANK ALARM SYSTEMFeatures:• Flashing light and buzzer• Unique auto reset• Battery backup protection• Alarm auxiliary contact offers flexibility to remote sources• Indicator lights/power and alarm status• UL and CSA listed

Part Number Model Number Description List Price Each965040 7001 Type 1 Enclosure, high level 15’ cord See separate price list

ALDERON 7004 TANK ALARM SYSTEMFeatures:• Automatic buzzer reset• REc polycarbonate beacon• 100db alarm buzzer• UL and CSA listed

Part Number Model Number Description List Price Each965045 7004 NEMA 4X, Indoor/Outdoor high level 15’ See separate price list

Part Number

ModelNumber Description Voltage

List Price Each

969030969035969040

717371857186

Single Piggyback/8” to 22” pumping rangeSingle Piggyback/2” to 60” pumping rangeSingle Piggyback/2” to60” pumping range

120/230VAC120VAC1230VAC


ALDERON 7008 WATER SPOTTER, FLOOD SENSORFeatures:• Works in conjunction with 7001 Tank Alarm

Part Number Model Number Description Cord Length Voltage List Price Each

965041 7008 Flood Sensor 15’ 120VAC See separate price list

MAASS MIDWEST PRESSURE SWITCHESFeatures:• CSA listed• UL listed

Part Number Type


Description Pressure ConnectionApprox. Weight (Lbs.)

List Price Each

940049940050940051

PS2PS2PS2

20/4030/5040/60

Standard switchStandard switchStandard switcH

1/4”1/4”1/4”

1.41.41.4


Part Number Model Number Description Cord Length Voltage

List Price Each

969005969010969015969020969025

73007055730473727069

Piggyback, pump downPiggyback, pump down

Piggyback, pump upNo plug, pump upNo plug, pump up

10’20’10’10’15’

120VAC120VAC

120/230VAC120/230VAC120/230VAC



ACCE

SSOR

IES

ACCESSORIESHEAT SHRINK SPLICE KITS

These kits feature thick wall, self-sealing heat shrinkable tubing which provides quick,moisture-proof splicing in the field. Kits are available in 2, 3 and 4 wire versions.

Features:• Professional grade• Splices made using standard wire crimping tool• Permanently flexible sealant• Wide range of sealing capability - will cover a large diameter connection and still

effectively seal down to a small diameter cable• Easy activation with heat source• Excellent Dielectric strength• 3M material USA made• Highly resistant to moisture, fungus and weathering

Part Number Description List Price Each942001942002942003942004942005942006942008942009942012942022942023942024942025942026942027942028

Heat Shrink Kit A-2 for 10, 12, 14 gauge wire (2 wire, black) Heat Shrink Kit A-2C for 10, 12, 14 gauge wire (2 wire, clear)

Heat Shrink Kit A-3 for 10, 12, 14 gauge wire (3 wire, black)Heat Shrink Kit A-3C for 10, 12, 14 gauge wire (3 wire, clear)

Heat Shrink Kit A-8 for 8 gauge wire (4 wire, black) Heat Shrink KitA-8C for 8 gauge wire (4 wire, clear)

Heat Shrink Kit A-4 for 10, 12, 14 gauge wire (4 wire, black)Heat Shrink Kit A-4C for 10, 12, 14 gauge wire (4 wire, clear)

Master Pack Heat Shrink Kit A-12C for 10, 12, 14 gauge wire (12 pks, clear)Heat Shrink Kit A-4,for 6 gauge wire (4 wire, black)

Heat Shrink Kit A-4,6C for 6 gauge wire (4 wire, clear)Heat Shrink Kit A-4,4 for 4 gauge wire (4 wire, black)Heat Shrink Kit A-4,4C for 4 gauge wire (4 wire, clear)Heat Shrink Kit A-4,2 for 2 gauge wire (4 wire, black)Heat Shrink Kit A-4,2C for 2 gauge wire (4 wire, clear)

Heat Shrink Kit A-4,10 for 1/0 gauge wire (4 wire)


Part Number Tubing Size Color Wire Size Bag Quantity

Bag Weight (Lbs.)

List Price Each

942029942030942033942034

3/8” x 3”3/8” x 3”3/8” x 3”3/8” x 3”

ClearClearBlackBlack

#10-12-14#10-12-14#10-12-14#10-12-14

5010050100

.52

.27

.19

.36


STANDARD CLEAR AND BLACK TUBING

Part Number Wire Gauge Description Quantity Per Package

List Price Each

942007942032942040942041942042942043942044942045

10-12-1410-12-14

8642

1/02/0

B-1210B-1210BC-8BC-6BC-4BC-2BC-10BC-20

50100502525111


BUTT SPLICE CONNECTORS

UNDERGROUND CABLE SPLICE KITFeatures:• For direct burial of 14 to 8 gauge multi-conductor feeder cable (copper wire only)• Easy activation with heat source• Will accommodate 2 or 3 conductors with ground• UL and CSA listed

Part Number Description List Price Each942010 Markel UF splice kit See separate price list


IDEAL ELECTRICAL CABLE TIESFeatures:• For tying and bundling applications

Part Number Length Size Package Quantity List Price Each942060942061

8.1”14.5”

1/16” to 2-3/16”1/16” to 4”

100100


ACCESSORIES

ACCESSORIES

IDEAL SILICONE-FILLED WIRE CONNECTORSFeatures:• Pre-filled silicone, wire nut connectors• UL Listed to 486D for use in damp/wet conditions• Weatherproof™ for interior or exterior locations• Easy to apply, pre-filled twist-on connectors

Part Number Model Number Wire Range Quanitity (Per Carton) List Price Each942054942056

6263

18 - 8AWG16 - 6AWG

100100


WELL CASING ELECTRICAL GROUNDING CLAMPPatented (Patent No. D414744)

Features:• Meets UL and CSA Standards for the bonding of ground wire to

metal well casing• Fits well casing 3” through 10” • Easily installed under the well cap• Required by National Electric Code• Suitable for 14 to 8 gauge copper wire• Cast brass material• Made in USA

Part Number Model Number Well Casing Wire Gauge List Price Each952900 M1 3” - 10” 14-8 See separate price list

SURGE ARRESTORFeatures: • Designed to protect motors and controls from voltage surges• Surges in excess of 500 volts are shunted to ground• Easily installed in conjunction with pressure switch or control box• Can be used with either 2 or 3 wire motors

Part Number Quantity Per Package List Price Each942020 1 See separate price list

SELF-FUSING SILICONE TAPEFeatures: • No adhesive needed• No torch needed• No need for heat shrinks• Insulates 400V/7 MIL• Waterproof• UL Listed• Maintains all characteristics and resistances from -65° up to 500°F• Made in USA

Part Number Description Size List Price Each943000943100943300943500

Tape DispenserRefill - Black - TriangularRefill - Clear - Triangular

30 MIL Black - Rectangular

1” X 10”1” X 12”1” X 12”2” X 30”


ALL WEATHER ELECTRICAL TAPEFeatures: • Requires no heat, moisture or other matter to be effective• No more than 600V• No more than 176°F (80°C)

Part Number Size Description Approved List Price Each942011942016

3/4” x 60’2” x 100’

7.0 mil thickness10 mil thickness - pipe wrap

UL See separate price list


ACCE

SSOR

IES

ACCESSORIES3M™ SUPER 33 + VINYL ELECTRICAL TAPE

Features:• UL Listed; UL 510 Standard “Insulating Tape”• PVC tape with high dieletric strength, flame retardant and conformable• Excellent resistance to abrasion, moisture, alkalis, acid, copper, corrosion, varying

weather conditions, and sunlight• 7 mil thickness

Part Number Size Description Carton Quantity List Price Each942017 3/4” x 66’ Up to 600V & 220°F (105°C) 10 See separate price list

3M™ 2242 LINERLESS TAPE | BLACKFeatures:• Multi-purpose insulating tape• Rated to 194°F (90°C)• Excellent for use in splicing and terminating wires and cables• Flame resistant• Moisture-sealing and insulating• Linerless Ethylene Propylene Rubber• For motor leads and wire and cable jacket repair

Part Number Size Description Carton Quantity List Price Each942015 3/4” X 180” 30 MIL Thickness 24 See separate price list

PTFE THREAD SEAL TAPE | GrayFeatures:• Prevents galling, seizing and corrosion• Temperature range from -450°F to 550°F• For coarse stainless steel threads• Made in USA

Part Number Size Description Qty. per Case Weight List Price Each942072 1/2” x 520” Gray thread seal tape 144 10 Lbs. See separate price list

PTFE THREAD SEAL TAPE | WhiteFeatures:• Made from 100% virgin PTFE• May be used on stainless steel• No pigments or additives• Temperature range from -450°F to 550°F

Part Number Size Description Qty. per Case Weight List Price Each942082942086

1/2” x 1296”3/4” x 1296”

White thread seal tapeWhite thread seal tape

250150

22 lbs.16 lbs.


1/4” POLYPROPYLENE BRAIDED ROPEFeatures:• 1000 lb. tensile strength• Made in

CHECK VALVES - Maass Midwestmaassmidwest.com/PDFs/Maass_Midwest_Catalog_580.pdf · 2020. 8. 7. · DUCTILE IRON CHECK VALVES DUCTILE IRON CHECK VALVES 600 SPRING LOADED CHECK VALVE

Documents