COMPOSITION Tipo Material Fabric with polyurethane (TPU) impregnation Finish Fabric Colour Green Coefficient of friction 0,3 Material Polyamide (PA) 0.06 Total thickness 1.40 Weight 1.50 0.31 lbs./sq.ft in. kg/m 2 mm TECHNICAL SPECIFICATIONS Humidity influence Permanent antistatic dynamically (UNI EN ISO 21179) NOTES Issue: 10-10-2011 Last Update: 8-07-2021 5.0 29 Tensile strength 200 1142 min. -20 -4 max 100 212 Temperature resistance (2) lbs./in. lbs./in. N/mm N/mm °C °C °F (2) Use of the belt with limit values may reduce its life 25 1.0 Minimum pulley diameter (1) (1) The above mentioned values depend on running speed mm in. °F Top surface Traction core Bottom surface Both sides can be used for power transmission yes yes no FEATURES Pull for 1% elongation FLAT TRANSMISSION BELTS CG217 CODE TYPE TECHNICAL DATA SHEET Material Synthetic elastomer Finish Fabric Colour Green Suitable for small power transmission Can be also used as conveyor belts Coefficient of friction 0,6 - Flexibility - Resistance to overloads - Coefficient of friction stable in time SUITABLE FOR Paper industry Printing and graphic Wood industry Packaging DISCLAIMER The information contained in this document describes the features of the CHIORINO product as tested in a laboratory environment at a temperature of +23 degrees °C at 50% relative humidity. It does not necessarily reflect the conditions of industrial use and it does not guarantee the product to be suitable for certain applications. The client remains liable for the proper selection and correct use of the CHIORINO product. CHIORINO cannot be held responsible should damages arise from the use of its products. Necessary alterations to this data can be made without prior notice. CHIORINO S.p.A. - VIA S. AGATA, 9 - 13900 BIELLA - ITALIA - P.O.B. 460 - TEL. +39-015-8489.1 - FAX +39-015.8496161 [email protected]- www.chiorino.com COMPLIANCES P1 REACH EC 1907/2006 Regulation and Amendments
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
COMPOSITION
Tipo
Material Fabric with polyurethane (TPU)impregnation
Finish Fabric
Colour Green
Coefficientof friction 0,3
Material Polyamide (PA)
0.06Total thickness 1.40
Weight 1.50 0.31 lbs./sq.ft
in.
kg/m2
mm
TECHNICAL SPECIFICATIONS
Humidity influence
Permanent antistatic dynamically(UNI EN ISO 21179)
NOTES
Issue: 10-10-2011 Last Update: 8-07-2021
5.0 29
Tensile strength 200 1142
min. -20 -4max 100 212
Temperatureresistance (2)
lbs./in.
lbs./in.
N/mm
N/mm
°C
°C °F(2) Use of the belt with limit values may reduce its life
25 1.0Minimum pulley diameter (1)
(1) The above mentioned values depend on running speed
mm in.
°F
To
p s
urf
ace
Tra
ctio
nco
reB
ott
om
su
rface
Both sides can be used for power transmission
yes
yes
no
FEATURES
Pull for 1% elongation
FLAT TRANSMISSION BELTS
CG217CODE TYPE
TECHNICAL DATA SHEET
Material Synthetic elastomer
Finish Fabric
Colour Green
Suitable for small power transmission
Can be also used as conveyor belts
Coefficientof friction
0,6
- Flexibility
- Resistance to overloads
- Coefficient of friction stable in time
SUITABLE FOR
Paper industry
Printing and graphic
Wood industry
Packaging
DISCLAIMERThe information contained in this document describes the features of the CHIORINO product as tested in a laboratory environment at a temperature of +23degrees °C at 50% relative humidity. It does not necessarily reflect the conditions of industrial use and it does not guarantee the product to be suitable for certainapplications. The client remains liable for the proper selection and correct use of the CHIORINO product. CHIORINO cannot be held responsible shoulddamages arise from the use of its products. Necessary alterations to this data can be made without prior notice.
CHIORINO S.p.A. - VIA S. AGATA, 9 - 13900 BIELLA - ITALIA - P.O.B. 460 - TEL. +39-015-8489.1 - FAX [email protected] - www.chiorino.com
COMPLIANCES
P1
REACH EC 1907/2006 Regulation and Amendments
Apply the K cement on the polyamide part of the splices.Let dry for 5 minutes, then match the belt ends, paying attention to align properly.Press according to the instructions shown.To ensure best joint life it is advisable not to run or tension the belt for 24 hours.
SKIVED JOINT ‘1’• Recommended joining procedure
• Skiving instructions
• Guide to the use of adhesives
• Layout of components
• Notes
Beltthickness
mm
Length
mm
Straight/diagonal
cut
Cam/wedgenumber
21-07-2011Issue: 30-01-2014Last Update:
Check our general catalogueto get further info onCHIORINO joining methods.
Cooling time:it is recommended to remove thebelt from the press once atemperature of 60/70 degrees Cis reached.
FLAT TRANSMISSION BELTS
TYPE
JOINING DATA SHEET
P1CG217CODE
Silicone sheeting thickness 3 mmBelt
Glossy non-adhesive fabric (ML58)
Upper heated platen
Lower heated platen
min.
CHIORINO S.p.A. - VIA S. AGATA, 9 - 13900 BIELLA - ITALIA - P.O.B. 460 - TEL. +39-015-8489.1 - FAX [email protected] - www.chiorino.com
Upper synthetic plate
Lower synthetic plate
DISCLAIMERThe information contained in this document describes the features of the CHIORINO product as tested in a laboratory environment at a temperature of +23degrees °C at 50% relative humidity. It does not necessarily reflect the conditions of industrial use and it does not guarantee the product to be suitable forcertain applications. The client remains liable for the proper selection and correct use of the CHIORINO product. CHIORINO cannot be held responsible shoulddamages arise from the use of its products. Necessary alterations to this data can be made without prior notice.