Officers Chairman: Brian Frye MISTRAS Group, Inc. [email protected]The American Society for Nondestructive Testing ASNT Central ASNT Central Ohio Section Ohio Section Central Ohio Section News & Meeting Announcement SECTION NEWS SECTION NEWS SECTION NEWS SECTION NEWS The Central Ohio Section held a meeting at ASNT Headquarter on Columbus, Ohio on 21 November. There were 10 members, guests and vendors in attendance. Mr. Luke Yoder, Regional Manager of FARO, gave a presentation on “Coordinate measuring machines and 3D imagingdevicestosolvedimensionalmetrologyproblems”, abriefoverviewofCoordinatemeasuringmachinesand3D imaging devices by using LEASR ...technology and an explanation about how CMMS works. CMMs Technology from FARO permits high-precision 3D measurement, imagingandcomparisonofpartsandcompoundstructures within production and quality assurance processes. The devices are used for inspecting components and assemblies, production planning, documenting large volume spaces or structures in 3D, and more. The system allows users to maximize efficiencies and improve Issue: January 2014 Attention: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]Attention: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected][email protected]Vice-Chairman/ Treasurer: Peter Pan Therm-O-Disc/Emerson [email protected]Secretary: Jing Ma Center for Reliable Energy Systems (CRES) [email protected]Board of Directors Jim Worman Andrew J. McGoldrick Don E. Didion III Juan Carlos Ruiz-Rico Tim Emmenegger Terry Webb allows users to maximize efficiencies and improve processes in areas such as machining, forging, casting, molding, and assemblies. After presentation, Luke gave a live demo to inspect some samples and real time to scan SectionSecretaryJingMa’shandandreconstructionintoa 3Dmodel.Afterthepresentation,Lukereceivedagiftand certificatefromSectionChairBrianFrye.Thesectionwould like to thank Luke for this informative and knowledgeable presentation.ThevendorfortheeveningisFAROInc.The sectionwouldliketothankthisvendorfortheircontinued support. https://www.facebook.com/asntcentralohio
5
Embed
Central Ohio Section News & Meeting Announcement · The American Society for Nondestructive Testing ASNT Central Ohio Section Central Ohio Section News & Meeting Announcement SECTION
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
SECTION NEWS SECTION NEWS SECTION NEWS SECTION NEWS The Central Ohio Section held a meeting at ASNT
Headquarter on Columbus, Ohio on 21 November. There
were 10 members, guests and vendors in attendance. Mr.
Luke Yoder, Regional Manager of FARO, gave a
presentation on “Coordinate measuring machines and 3D
imaging devices to solve dimensional metrology problems”,
a brief overview of Coordinate measuring machines and 3D
imaging devices by using LEASR ...technology and an
explanation about how CMMS works. CMMs Technology
from FARO permits high-precision 3D measurement,
imaging and comparison of parts and compound structures
within production and quality assurance processes. The
devices are used for inspecting components and
assemblies, production planning, documenting large
volume spaces or structures in 3D, and more. The system
allows users to maximize efficiencies and improve
Issue: January 2014
Attention: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]
processes in areas such as machining, forging, casting,
molding, and assemblies. After presentation, Luke gave a
live demo to inspect some samples and real time to scan
Section Secretary Jing Ma’s hand and reconstruction into a
3D model. After the presentation, Luke received a gift and
certificate from Section Chair Brian Frye. The section would
like to thank Luke for this informative and knowledgeable
presentation. The vendor for the evening is FARO Inc. The
section would like to thank this vendor for their continued
support.
https://www.facebook.com/asntcentralohio
Last Meeting PicturesLast Meeting PicturesLast Meeting PicturesLast Meeting Pictures
Attention: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]
ASNT Central Ohio Section Meeting Program for 2014- SAVE THE DATES
Month Meeting Planning
July 2013 Program &Board Meeting
August 2013 Booked XYLON 08/22/2013
September 2013 Booked Olympus 09/26/2013
October 2013 Booked ASNT President 10/24/2013
November 2013 Booked FARO Technologies 11/21/2013
December 2013 No Meeting
January 2014 Booked Evisive 1/16/2014
February 2014 Booked Virtualspectrum 2/20/2014
March 2014 Booked OSU Student Outreach & EWI tour Organizer :Don Didion
April 2014 Booked MISTRAS Group, Inc.
May 2014 Booked DNV tour
June 2014 Annual Golf outing
Next Meeting: January 16, 2014 Thursday
The meeting will be held at ASNT Offices, 1711 Arlingate Lane, Columbus, OH 43228
Directions:
I-270 exit 10 for Roberts RdTurn right onto Roberts RdTurn left onto Westbelt DrTurn left onto Trabue RdTurn left onto Arlingate LnDestination will be on the left
November MeetingNovember MeetingNovember MeetingNovember Meeting
Plan to join the ASNT Central Ohio Section for a technical presentation on Microwave non-destructive examination (NDE) technology by Mr. Bob Stakenborghs, General Manager of Evisive, Inc. .
Date: January 16th , 2013 Thursday 5:30pm – 7:30pm
Mr. Bob Stakenborghs is the General Manager of Evisive, Inc., located in Baton Rouge, La. Bob has a BSME from LSU in Baton Rouge, a MSME from Catholic University in Washington DC and he holds a Level III Inspector Certification in Microwave NDE from Evisive. Bob has been active in microwave NDE since the early 1990’s and has been with Evisive since its inception. He has been in Nuclear Power Plant Engineering since 1980 and is a registered Professional Mechanical Engineer in several states. Bob has written many
Attention: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]
Contact: If you plan to attend, please RSVP to Jing Ma, Central Ohio Section Secretary ([email protected] ) to make a reservation or for more information. All reservations are final on 1/15/2014.
since 1980 and is a registered Professional Mechanical Engineer in several states. Bob has written many technical papers on engineering and microwave inspection and is an active member of ASME, ASNT, ASTM, and the Society of Plastic Engineers.
Evisive Microwave NDE Technology–www.evisive.com
The basics for the Evisive microwave non-destructive examination (NDE) technology was developed in the early 1990s and patented a decade later. This unique NDT method was initially developed to inspect dielectric materials such as rubber expansion joints and fiberglass reinforced piping. Once the method was patented, Evisive, Inc. was founded and has refined the equipment and methods into an advanced and proven specialty NDE technique. The Evisive microwave NDE technique has currently been applied as a field-proven method, to a wide range of dielectrics, including: reinforced rubber, HDPE butt and electro-fusion joints, other plastics, ceramics, organic and ceramic composites and other advanced materials.It is currently in use world-wide and is becoming the preferred NDE method for a wide range of dielectric materials. Evisive microwave inspection techniques are in the process of incorporation into ASNT and ASTM for inspection of a wide range of dielectric materials.
Attention: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]
The Board of Directors of ASNT-Central Ohio Section, would like to state that any and all advertisements or employment listings present in this newsletter and any previous or subsequent ones, are not endorsed or certified by ASNT-Central Ohio Section. They are simply paid advertisements and/or general information that is disseminated to the members at large for their own personal use.
ASNT-Central Ohio Section cannot be held responsible for the claims or representations made by the providers of said information
ADVERTISEMENT PRICES
Dimensions One time Entire Year
Business Card 3 ½ ”W x 2”H $10 $100
¼ page 4 5/8” W x 3 3/8”H $20 $150
½ page 5” W x 7” H $25 $200
Full page 10” W” x 7” H $30 $275All proceeds will promote the mission and vision of ASNT locally.
Note from your editor
�If you are interesting to be a sponsor, please contact Vice chair for details and pricing.
�If you have newsletter updates, please get them to me by the 20th of the month before the next issue, to ensure your information gets out on time.
Attention: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]: Forward this Newsletter to interested colleagues who are not receiving it. Anyone who would like to be on distribution may send his or her address to [email protected]