CDN CCI Specialty Gas Detection

8/18/2019 CDN CCI Specialty Gas Detection

1/108www.conceptcontrols.com

ENVIRONMENTAL SURVEY/PURGING MONITORS

GAS DETECTION:SPECIALTYInterscan Portable Analyzers

4000 Series 84

Cerex Portable Analyzers

AirSentry FTIR Open Path Multi-Gas Analyzer 85

Sentry Series Open Path 86Multi-Gas Analyzers 86

UV 3000 Series Multi-Gas Analyzers 87

FT 5000 Series Multi-Gas Analyzers 88

Environmental Survey/Purging Monitors

VRAE 89

RKI Eagle 2 89

AreaRAE 89

ChemKeyT TLV 90

Chemcassette 90

SPM 90

Specialized Gas Detection

Gem5000 91

G100 CO2 Incubator Analyzer 91

G110 CO2 Analyzer 91G150 CO2 Indoor Air Quality Analyzer 92

G200 N2O 0-1,000 ppm Gas Analyzer 92

G210 N2O 0-100% Gas Analyzer 92

Flame Ionization Detectors

Thermo Scientic TVA-1000B Portable FID/PID 92

8


2/10

GAS DETECTION: SPECIALTY

84 www.conceptcontrols.com

4000 Series

Interscan’s 4000 Series Portable Analyzers are perfect for

survey work and short-term continuous monitoring duty. The

analyzers are provided with:

Features:

• 3-1/2 digit LCD display

• 58 sensor options

• Integral sample pump & plug-in

charger

• User-adjustable single alarm

level activating audible and visual

alarm

• 0-100 mV output

• Carrying case with shoulder strap

• 12 inch (30.5 cm) Teon sample

probe

UL-Classied intrinsically safe models are available.

Ordering Information

Gas Range MODEL No.

Br2 0-19.99 ppm 4700-19.99m

Bromine 0-1999 ppb 4700-1999b

CO 0-1999 ppm 4140-1999m

Carbon Monoxide 0-500.0 ppm 4140-500.0m

0-199.9 ppm 4140-199.9m

Cl2 0-5.00ppm 4340-5.00m

Chlorine 0-19.99 ppm 4340-19.99m

0-1999 ppb 4340-1999b

ClO2 0-19.99 ppm 4330-19.99m

Chlorine Dioxide 0-1000 ppb 4330-1000b

0-1999 ppb 4330-1999b

C2H4 0-1999 ppm 4070-1999m

Ethylene 0-199.9 ppm 4070-199.9m

0-19.99 ppm 4070-19.99m

0-500.0 ppm 470-500.0m

0-1999 ppb 4070-1999b

EtO 0-19.99 ppm 4200-19.99m

Ethylene Oxide 0-50.0 ppm 4200-50.0m

0-1000 ppb 4200-1000b

0-1999 ppb 4200-1999b

HCHO 0-5.00 ppm 4160-5.00m

Formaldehyde 0-19.99 ppm 4160-19.99m

0-1000 ppb 4160-1000b

0-1999 ppb 4160-1999b

H2NNH2 0-1000 ppb 4180-1000b

CH3NHNH2 0-1999 ppb 4180-1999b

(CH3)2NNH2

HBr 0-19.99 ppm 4800-19.99m

Hydrogen Bromide 0-1999 ppb 4800-1999b

HCl 0-19.99 ppm 4360-19.99m

Hydrogen Chloride 0-1999 ppb 4360-1999b

HCN 0-19.99 ppm 4280-19.99m

Hydrogen Cyanide 0-199.9 ppm 4280-199.9m

0-1999 ppb 4280-1999b

H2S 0-19.99 ppm 4170-19.99m

Hydrogen Sulde 0-1000ppb 4170-1000b

0-500 ppb 4170-500b

0-1999 ppb 4170-1999b

NO 0-199.9 ppm 4540-199.9m

Nitric Oxide 0-19.99 ppm 4540-19.99m

0-1999 ppb 4540-1999b

NO2 0-199.9 ppm 4150-199.9m

Nitrogen Dioxide 0-19.99 ppm 4150-19.99m

0-1999 ppb 4150-1999b

O3 0-19.99 ppm 4480-19.99m

Ozone 0-1999 ppb 4480-1999b

PrO 0-199.9 ppm 4320-199.9m

Propylene Oxide 0-19.99 ppm 4320-19.99m

0-1999 ppb 4320-1999b

SO2 0-19.99 ppm 4240-19.99m

Sulfur Dioxide 0-50.0 ppm 4240-50.0m

0-1999 ppb 4240-1999b

UL Listed Models

H2NNH2 0-0.5/0-2 ppm 4183UL

CH3NHNH2 0-2/0-10 ppm 4186UL

(CH3)2NNH2 0-100/0-2000 ppb 4187UL

Hydrazine 0-100/0-1000 ppb 4189UL

NO2 0-2/0-10 ppm 4152UL

Nitrogen Dioxide 0-10/0-50 ppm 4154UL

INTERSCAN PORTABLE ANALYZERS


3/10 8www.conceptcontrols.com

AirSentry FTIR Open Path Multi-Gas Analyzer

The Cerex AirSentry FTIR multi-gas analyzer is the recognized choice in open path FTIR and the most reliable

for monitoring industrial facilities, accidental releases, and hazardous waste site emissions. The system monitors

from 5 to 1,000 metres and eliminates the need for many single point gas specic sensors, lengthy calibration,

and laboratory analysis.

The AirSentry FTIR is the only commercial open-path FTIR evaluated in two USEPA site studies and proven

capable of detecting, identifying, and quantifying air toxins. It is efcient as an alarm and easily integrated into

your existing alarm system.

Typical Minimum Detection of Commonly Requested Single Gases: 300 Metre Path:

CEREX PORTABLE ANALYZERS


Compound PPB

Acetaldehyde 2

Acetic Acid, monomer 4.7

Acetone 9.7

Acetonotrile 43.3

Acetl Chloride 2.2

Acetylene 2.6

Acrolein 2.8

Acrylic Acid 1.5

Acrylonitrile 5

Ammonia 0.7

Aniline 13

Arsine 5.7

Benzene 110

Bis-dichloroethylether 2.3

Boron Trichloride 0.7

Bromomethane 27.3

Butadiene 3.1

n-Butane 7

2-Butanone 7

Carbon Dioxide 43.7

Carbon Disulde 11.3

Carbon Monoxide 4.3

Carbon Tetrachloride 0.8

Carbon Tetrauoride 0.7

Carbonyl Sulde 1.6

Chlorobenzene 5

Chlorodiuoromethane 0.7

Crotonaldehyde 2.5

Chloroethane 6.7

Chloroform 0.8

Chloromethane 31.3

Chlorotriuoromethane 2

Cyclohexane 0.7

Cyclohexene 2.4

Cyclopentene 4.3

Cyclopropane 6.7

1,2 Dibromoethane 7.7

m-Dichlorobenzene 4

o-Dichlorobenzene 3.1

Dichlorodiuoromethane 0.7

1,1 Dichloroethane 3.7

1,2 Dichloroethane 24.3

1,1 Dichloroethene 2.3

1,2 Dichloroethene 6.7

Compound PPB

4-Methyl 2-Pentene 4

Methyl Vinyl Ether 4.7

Methyl Vinyl Ketone 6.3

Nitric Acid 2.1

Nitric Acid 76.7

Nitro Benzene 4.3

Nitro Ethane 10

Nitrogen Dioxide 9.7

Nitro Methane 27

Nitrous Acid 0.7

Nitrous Oxide 6.3

Octane 0.8

Ozone 2.2

n-Pentane 2.8

1-Pentene 3.3

2-Pentene 5

trans-3-Pentene nitrile 2

Phosgene 0.7

Phosphine 9

Propane 6.3

Propionaldehyde 1.6

Propionic Acid 7.3

Propylene 4.7

Propylene Oxide 7.3

Silicon Tetrauoride 0.7

Styrene 4

Sulfur Dioxide 15

Sulfur Hexauoride 0.7

1,1,1,2 Tetrachloroethane 1.3

1,1,1,2 Tetrachloroethane 133.3

Tetrachloroethene 0.7

Tetrahydrothiophene 3

Toluene 11.3

1,1,1 Trichloroethane 1.8

1,1,2 Trichloroethane 4.7

Trichloroethene 0.8

Trichlorouormethane 0.7

Trochlorotriuoroethane 0.7

Vinyl Acetate 2.5

Vinyl Chloride 5.3

Vinylidene Chloride 2.3

m-Xylene 5

o-Xylene 9

p-Xylene 4.7

Compound PPB

Dichloromethane 4.3

1,2 Dichlorotetrauorethane 0.7

Diethyl Ether 0.9

Dimethylamine 2.4

Dimethyl Ether 3

1,1 Dimethyl Hydrazine 1.2

Dimethyl Sulde 1

Ethane 5.3

Ethanol 3

Ethyl Benzene 11.3

Ethylene 2.1

Ethylene Oxide 3.7

Ethyl Vinyl Ether 4

Fluorobenzene 5.7

Formaldehyde 1.5

Formic Acid, Monomer 2.6

Furan 3.7

n-Hexane 1.5

Hydrogen Bromide 4

Hydrogen Chloride 2

Hydrogen Cyanide 22.7

Hydrogen Fluoride 0.7

Hydrogen Sulde 1500

Isobutane 2.5

Isobutanol 1.1

Isobutylene 1.4

Isoctane 2

Isoprene 1.5

Isopropanol 3.7

Mesitylene 3.1

Methane 11.7

Methanol 1.4

Methyl Acetate 2.7

Methyl Acrylate 2.2

Methylamine 9.7

2-Methyl 2-Butene 15.7

3-Methyl 1-Butene 5.3

Methyl Formate 5

Methyl Methacrylate 2.2

Methyl Nitrite 2.2

2-Methyl Pentane 3.7

3-Methyl Pentane 2

2-Methyl 1-Pentene 5.7

2-Methyl 2-Pentene 3


4/10



Sentry Series Open Path

Multi-Gas Analyzers

Sentry MX and Sentry MD

The Sentry MX and Sentry MD are

monostatic, open-path air-monitoring

systems that use ultraviolet light

to analyze the air for hazardous

pollution and airborne toxins.

Easy to use and portable, the Sentry

MX can continuously monitor one-

way path lengths up to 1000 metres

(a 2000 metre optical path length).

The Sentry MD can continuously

monitor one-way path lengths up to

400 metres (an 800 metre optical

path length).

The monostatic design of the Sentry MX and Sentry MD

eliminates the need for power at both ends of the path. They

offer real-time detection of compounds from the parts-per-trillion

to percent concentration level.

UV Sentry BX and Sentry BD

The Cerex UV Sentry BX and BD are

two-part, open-path air-monitoring

systems that use ultraviolet light

to analyze the air for hazardous

pollution and airborne toxins.

Easy to use and portable, the

UV Sentry can continuously monitor path-lengths up to 1000

metres (BX) or 450 metres (BD). The UV Sentry offers real-time

detections of compounds ranging in concentrations from the

parts-per-billion to percent level.

Mini Sentry

Cerex Mini Sentry Continuous

Analyzers are engineered specically

for low cost, low maintenance,

high performance point monitoring

arrays or optional short, open path

monitoring arrays. Stock models are

available for ammonia, benzene and

chlorine monitoring.

A direct replacement for electrochemical, PID and NDIR senso

arrays, the Mini Sentry cannot be poisoned, is unaffected by

high humidity, offers ppb level detection limits, and is easily

installed for long term monitoring installations.

Sentry Series open-path monitors utilize an expansive library

of detectable gases for continuous monitoring, from hazardous

health sites to renery emissions. These analyzers feature

software, programmable adjustment of alarm levels, and user

congurable relay activated alerts for gas faults. All Sentry

devices feature custom alarms, complete integration into your

existing data network, and an unparalleled ease of use. Alarm

outputs include 4-20mA signals and SPDT relays for fast,

reliable warning. Combined with a wireless or wired network, our

analyzers can relay concentration levels from remote locations

to a central control station for immediate response.

All Sentry series open path multi-gas analyzers are capable of

parts per trillion analysis of mercury, and parts per billion (ppb)

to percent level monitoring of most other compounds.

Available Compounds for Sentry Series Analyzers:

Compound Detected Mini

MX / BX

(Xenon

Source)

MD / BD

(Deuterium

Source)

1,3 Butadiene (C4H6) ●

Acetaldehyde (C2H4O) ● ●

Acetone (CH3COCH3) ●

Acrolein (C3H4O) ●

Ammonia (NH3) ● ●

Benzene (C6H6) ● ● ●

Carbon Disulde (CS2) ● ●

Chlorine (Cl2) ● ● ●

Chlorine Dioxide (ClO2) ● ●

Ethyl Benzene (C8H10) ● ●

Formaldehyde (CH2O) ● ●

Hydrogen Sulde (H2S) ●

Isoprene (C5H8) ● ●

Mercury (Hg) ● ●

Naphthalene (C10H8) ● ●

Nitric Oxide (NO) ●

Nitrogen Dioxide (N2O) ●

Nitrous Acid (HNO2) ● ●

Oxygen (O2) ●

Ozone (O3) ● ●

Phenol (C6H5OH) ● ●

Styrene (C8H8) ● ●

Sulfur Dioxide (SO2) ● ●

Toluene (C6H5CH3) ● ●

Trimethylbenzene (C9H12) ● ●

O-Xylene, M-Xylene, P-Xylene

(C8H10)● ●




UV 3000 Series Multi-Gas Analyzers UV 3000 and UV 3000PStack Analyzers

UV 3000 analyzers are used in process monitoring, stack

monitoring, and mobile air quality laboratory applications.

Options

• Cross process pipe adapters• Fast UVDOAS acqusition cycles

• NEMA enclosure

• Operator specic control outputs

• Extended temperature

control options for extreme

environments

The Cerex UV 3000 P is a xed mount

multi-gas analyzer with a ange adapted probe. Available with two

ports for operator specied quality assurance audits, integrated

stack temperature and humidity monitoring, and wired or wireless

remote control. Continuous sample acquisition reduces latency

and for many applications the sample acquisition cycle is one

minute in duration.

UV 3000 F and UV 3000 XFProcess and Benchtop Analyzers

UV 3000 F model analyzers are used in process monitoring

indoor air quality, and mobile air quality laboratory applications

The UV 3000 F is available with a range of bre coupled cells

custom cross process adapters, and insitu monostatic probes

It is ideal for laboratory setups as well as closed cell process

monitoring and insitu process monitoring.

Cerex UV 3000 XF model analyzers

are used in laboratory, mobile, and

process air quality applications.

Fibre coupled cell options offer a

vast range of detection limits while

simultaneously ensuring separation of the main unit from the

various hazards of corrosive or explosive environment monitoring

UV 3000C Zone Analyzer

The UV 3000C is a xed

mount multi-gas analyzer with

internal sample cell. Available

with an integrated twelve port

multiplexer, it offers sequential

zone monitoring of up to ten

locations for leak detection,

process monitoring or indoor air

quality monitoring. Two ports are

generally reserved for operator

specied quality assurance audits. Continuous parallel sample

acquisition reduces latency and for many applications the sample

acquisition cycle is one minute.

Cerex manufactures stock and fully custom UVDOAS analyzers

within the UV 3000 product series. Based around a proven

UVDOAS data acquisition system, each unit is capable of

harnessing our proven methods in your environment. Available

in Cross Stack, Rackmount, Probe and Zone congurations, the

UV 3000 series of analyzers has something for everyone.

Cerex UVDOAS analyzers accurately measure common

combustion gases, BTEX, SVOC’s, chlorine, ammonia, as well

as many more. All our devices feature custom alarms, complete

integration into your existing data network, and an unparalleled

ease of use.

Available Compounds for UV 3000 Analyzers:

Compound Detected

3000,

3000P,

3000F 3000XF 3000C

1,3 Butadiene (C4H6) ● ●


Acetone (CH3COCH3) ●

Acrolein (C3H4O) ●

Ammonia (NH3) ● ●

Benzene (C6H6) ● ● ●

Carbon Disulde (CS2) ● ● ●

Chlorine (Cl2) ● ●


Ethyl Benzene (C8H10) ● ● ●

Formaldehyde (CH2O) ● ● ●

Hydrogen Sulde (H2S) ● ●

Isoprene (C5H8) ● ●

Mercury (Hg) ● ● ●

Naphthalene (C10H8) ● ● ●

Nitric Oxide (NO) ●

Nitrogen Oxide (NO) ●

Nitrogen Dioxide (N2O) ● ●

Nitrous Acid (HNO2) ●

Oxygen (O2) ● ●

Ozone (O3) ● ● ●


Styrene (C8H8) ● ●

Sulfur Dioxide (SO2) ● ● ●

Toluene (C6H5CH3) ● ● ●

Trimethylbenzene (C9H12) ● ●

O-Xylene, M-Xylene, P-Xylene

(C8H10)● ● ●


6/10



FT 5000 Series Multi-Gas Analyzers FT5000 CEM Cross Stack Analyzers

The Cerex FT5000 is a portable Continuous Emissions Monito

for cross stack applications. It is based on proven FTIR and

DOAS technology. It provides real-time multi-gas qualication and

quantication of gases commonly found in stack emissions. The

FT5000 can also serve as a reliable alarm and easily integrates

into your existing alarm system. The Cerex FT5000 analyzer isbased on the widely acclaimed full spectrum Bomem MB3000

interferometer. The MB3000 has compliance with CE and TUV.

FT5000+Dual channel FTIR / UVDOAS Cross Stack Multi-Gas

CEM Analyzer

The Cerex FT5000+ is a xed Continuous Emissions Monitor

for cross stack or process applications. The system is based

on proven FTIR and UVDOAS technology. It provides real-time

multi-gas qualication and quantication of gases commonly

found in stack emissions. The FT5000+ features simultaneous

dual channel UVDOAS and FTIR operation, allowing fo

monitoring of gases typically impossible with a single system. Icomes standard with an internal controller for data logging and

integration into your existing data acquisition network. A numbe

of output options for alarm, data, and process control are available

for direct integration into your exisiting emissions control system.

FT5000 PInsitu Probe CEMs, Multi-gas FTIR Stack Analzyer

The Cerex FT5000 P is a xed Continuous Emissions Monitor fo

applications requiring a stack or process probe. It provides real

time multi-gas qualication and quantication of gases commonly

found in stack emissions. Multiple detector options and probe

lengths are available to meet the exact requirements of the

installation. The FT 5000 P can also serve as a reliable alarm and

easily integrates into your existing alarm system. It is based on the

widely acclaimed full spectrum Bomem MB3000 interferometer

which has compliance with CE and TUV. It comes standard with

an internal controller for data logging and integration into you

existing sensor network. A number of output options for alarm

data, and process control are available.

Cerex cross stack, probe based, and UVDOAS FTIR hybrid

systems allow the FT 5000 Series to monitor a wide array of

compounds that would typically require multiple devices. Minimal

maintenance expenses, coupled with automatic calibration cycles

and continuous logging and transmission of data, make the FT

5000 series perfect for your monitoring application. Cerex FTIRanalyzers can easily be congured to monitor over 400 other

compounds. They feature custom alarms, complete integration

into your existing data network, and an unparalleled ease of use.

Available Compounds for Sentry Series Analyzers:

Compound Detected

FT 5000

& 5000P FT 5000+


Acetic Acid (C2H4O2) ● ●

Acetone (CH3COCH3) ● ●

Acetylene (C2H2) ● ●

Acrolein (C3H4O) ● ●

Ammonia (NH3) ●

Benzaldehyde (C7H6O) ● ●

Benzene (C6H6) ●

Butane (C4H10) ● ●

n-Butyl (C6H12O2) ● ●

Carbon Dioxide (CO2) ● ●

Carbon Disulde (CS2) ●

Carbon Monoxide (CO) ● ●

Chlorine (Cl2) ●


Ethane (C2H6) ● ●

Ethanol (C2H6O) ● ●

Ethyl Benzene (C8H10O) ● ●

Formaldehyde (CH2O) ●

Formic Acid (CH2O2) ● ●

n-Hexane (C6H14) ● ●

Hydrogen Bromide (HBr) ● ●

Hydrogen Chloride (HCl) ● ●

Hydrogen Fluoride (HF) ● ●

Hydrogen Sulde (HS) ●

Isoprene (C5H8) ●

Mercury (Hg) ●

Methane (CH4) ● ●

Napthalene (C10H8) ●

Nitric Oxide (NO) ● ●

Nitrogen Dioxide (N2O) ● ●Nitrous Acid (HNO2) ●

Oxygen (O2) ●


Phosgene (CCl2O) ● ●

Styrene (C8H8) ●

Sulfur Dioxide (SO8H8) ●

Toluene (C6H5CH3) ●

Trimethylbenzene (C9H12) ●

Water Vapor (H2O) ● ●

O-Xylene, M-Xylene, P-Xylene (C8H10) ●

O-Xylene, M-Xylene, P-Xylene (C8H10) ●





RKI Eagle 2

RKI is proud to offer the next generation of our popular Eagleportable gas detector. Equipped with features that are not available

on competitive units, the Eagle 2 is a powerful instrument that

does more than just offer the standard conned space protection

for LEL, O2, H2S and CO.

Features:

• Monitor up to 6 autoranging gases

• PPM / LEL hydrocarbon detection

• PID (photoionization detector) low and

high range for VOC detection

• Infrared Sensors available: CO2, % LEL

CH4, % Vol. CH4, % LEL HC, % Vol. HC

• TC (Thermal Conductivity) sensorsavailable: % Vol. H2 or % Vol. CH4

• Plug and play, smart toxic sensors

• Displays in 5 languages

• Powerful long-life pump up to 125’ range

• Low ow pump shut off and alarm

• Methane elimination for environmental use

• Alkaline 18 hours or Ni-MH 20 hours capability

• Password protection

• Datalogging standard

• IrDA communications port

• Autocalibration/single gas calibration

• Internal hydrophobic dust lter

• External probe with hydrophobic lter

RENTAL

VRAE

VRAE is a hand held one-to-ve gas monitor with built-in

sampling pump and optional data logging.

Sensors include new RAE dual range 0-100% volume and

0-100% LEL, oxygen, and three or four smart, interchangeable

toxic sensors may be added.

The internal pump automatically shuts off

and an alarm is activated if the remote probe

tubing crimps or liquid is sucked onto the

eld-replaceable lter.

Features:

• 16,000 data points download to PC

• Snap-in, eld replaceable, rechargeablebattery with up to 10 hours of continuous

operation

• Protected from portable radios

• Internal sample draw pump for quick

response and remote sampling

• Smart battery charging with status

indication and LED indicator

RENTAL AreaRAE

The AreaRAE is a one-to-ve sensor gas detector

equipped with a built-in, wireless RF (radio frequency)

modem that allows the unit to communicate and

transmit readings and other information on a real-time

basis with a remotely located base controller.

It is a multi-sensor instrument that

can include a Photoionization

detector (PID) for parts-per-million

measurement of volatile organic

compounds (VOCs), a gamma

radiation detector, an LEL, O2 sensor

,and up to two electrochemical toxic

gas sensors for measurement of

specic toxic substances such as CO

and H2S.

AreaRAE is approved for use in Class I Division 2 hazardous

environments. A personal computer with ProRAE Remote

is the base station for an AreaRAE system. The standard

ProRAE Remote software used to control AreaRAE systems is

capable of monitoring the input of up to 32 remotely located

monitors.

AreaRAE monitors can be equipped with optional GPScapability allowing users to know the exact location of the

monitor.

Monitor-only includes:

• Monitor as specied

• Carbon lters (for units with CO)

• Calibration adapter

• Quick reference guide

• Operation and maintenance manual

• Shoulder strap

• Rechargeable Lithium-ion battery

pack

• 120/240 VAC AC/DC adapter

• Spare alkaline battery pack• 10 spare external lters

• Hard transport case with

pre-cut foam

• 15’ (5 m) Teon tubing

• Tool kit

AreaRAE Steel shown with

optional stand

Wireless, Multi-channel, Compact and Easily

Transportable Multi-Gas Monitor

RENTAL WIRELESS

NEW

Concept Controls Inc.


8/10



Utilizing the exclusive ChemKey Gas Selection System, a

single monitor is capable of monitoring over 50 different gases

with just a change of ChemKey and Chemcassette. As with

all Chemcassette based products, you are assured of fast,

sensitive and substance specic exposure protection. There is

never any danger of false alarms or inaccurate results causedby other commonly present chemicals.

ChemKeyTM TLV

Advantages

• Portable, exible and

interference free toxic gas

detection

• Battery operated or line

powered

• Exclusive

Chemcassette® detection

is gas specic, sensitivity

to ppb levels with

physical evidence

Detectable Gases Range

Amines

Ammonia (NH3)* 2.6-75.0ppm

Ammonia (NH3)-II 2.6-75.0ppm

Methylene Dianiline (MDA) 3-60ppb

n-Butylamine (n-BA) 0.4-12.0ppm

p-Phenylene Diamine (PPD) 2-60ppb

Toluene Diamine (TDA) 4-60ppb

Trimethylamine (TMA) 1.1-30.0ppm

Diisocyanates Range

CHDI, HDI, HMDI, IEM, IPDI, MDI, NDI,

PPDI, TDI, TMDI, TMXDI, XDI 2-60ppb

Hydrazines

MMH* 21-600ppb

N2H4 20-300ppb

UDMH* 53-1500ppb

Hydrides

Arsine (AsH3) 15-150ppbDiborane (B2H6) 31-300ppb

Disilane (Si2H6) 1.5-15ppm

Germane (GeH4) 141-600ppb

Hydrogen Selenide (H2Se) 20-150ppb

Phosphine (PH3) 32-900ppb

Silane (SiH4) 0.5-15ppm

Stibine (SbH3) 20-300ppb

tert-Butylarsine (TBA) 15-150ppb

tert-Butylphosphine (TBP) 60-900ppb

Hydrogen Cyanide (HCN)* 1.1-30.0ppm

Hydrogen Sulde (H2S) 1.1-30.0ppmHydrogen Sulde (H2S) Low Level

1-90ppb

Mineral Acids

Hydrogen Bromide (HBr) 0.3-9.0ppm

Hydrogen Chloride (HCl) 0.5-15.0ppm

Hydrogen Fluoride (HF) 0.6-9.0ppm

Nitric Acid (HNO3) 0.2-6.0ppm

Sulfuric Acid (H2SO4)* 26-750ppb

Oxidizers

Bromine (Br2) 11-300ppb

Chlorine (Cl2)* 0.1-3.0ppm

Chlorine (Cl2)-II 0.5-1.5ppm

Chlorine Dioxide (ClO2) 11-300ppb

Hydrogen Peroxide (H2O2) 0.1-3.0ppm

Nitrogen Dioxide (NO2) 0.3-9.0ppm

Ozone (O3) 31-300ppb

Phosgene (CoCl2) 11-300ppb

Sulfur Dioxide (SO2) 0.2-6.0ppm

* other ranges available

Chemcassette

The Chemcassette® detection system is the heart of an MDA

toxic gas monitoring system. Chemcassettes use a dry reagent

medium to collect and analyze air to detect gas leaks. When the

Chemcassette® is exposed to a target gas, it changes colour in

direct proportion to the concentration of gas present.

SPM

The SPM´s standard weather-

proof enclosure will withstand the

rigors of outdoor operation. A

purged enclosure is optional for

hazardous areas. You can also

specify the SPM with heating

and cooling options to match your

environmental requirements.

Call us for ordering information

Concept Controls Inc.



SPECIALIZED GAS DETECTION

SPECIALIZED GAS DETECTION

Gem5000

The GEM5000 is the next generation in the GEM Series of

instruments for accurate measurement and monitoring of landlls.

Features:

• Measures % CH4, CO2 and O2 volume, static pressure and

differential pressure

• Calculates balance gas, ow

(SCFM) and caloric value (KW

or BTU)

• High accuracy and fast response

time

• Lighter and more compact

• Certied intrinsically safe

• Calibrated to ISO/IEC 17025

• 3 year warranty

Benefts:

• Designed specically for use on

landlls to monitor landll gas (LFG)

extraction systems, ares, and migration control systems

• No need to take more than one instrument to site

• Can be used for monitoring subsurface migration probes

and for measuring gas composition, pressure and ow in

gas extraction systems

• The user is able to set up comments and questions to

record information at site and at each sample point

• Ensures consistent collection of data for better analysis

• Streamlined user experience reduces operational times

Specifcations:

Gases Measured

CH4 By dual wavelength infrared cell w/ reference channel

CO2 By dual wavelength infrared cell w/ reference channel

O2 By internal electrochemical cell

CO By internal electrochemical cell

H2S By internal electrochemical cell

Ranges

CH4 0-100% (vol)

CO2 0-25% (vol)

O2 0-100% (vol)

CO 0-2000ppm***

H2S 0-500ppm***

Gas Accuracy*

CH4 0-5% ± 0.3% (vol) 0-70% ± 0.5% (vol) 70-100% ± 1.5% FS

CO2 0-5% ± 0.3% (vol) 0-60% ± 0.5% (vol) 60-100% ± 1.5% FS

O2 0-25% ±1.0% (vol)

CO 0-2000ppm ± 1.0% FS

H2S 0-500ppm ± 2.0% FS

* Typical accuracy after calibration as recommended in the

operations manual

** Hydrogen compensated carbon monoxide measurement

*** Additional ranges available, contact us for more information

G100 CO2 Incubator Analyzer

The new G100 CO2 analyzer is specically designed to monitor

CO2 for the verication of incubators in IVF, medical, research

and other pharmaceutical applications. It incorporates the latestechnology and specications requirements, providing the use

with a fast, simple-to-use and accurate piece of the laboratory kit

Features:

• CO2 0 – 20%

• Options for:

• O2 0 – 100%

• Dual temperature probes

32°F – 122°F (0°C – 50°C)

• Data storage and download

• Humidity sensor 0 – 100%

Benefts:

• Improved accuracy on CO2 readings• Quick verication of CO2 incubator

levels

• Time saving with dual

temperature probes

• Large data storage with

software

• Easy to read, large, well-lit display

• Built in gas moisture removal

NEW

G110 CO2 Analyzer

The G110 CO2 analyzer is designed to monitor CO2 fo

multiple applications including the brewing industry. It ha

been developed using the latest technology and specifations

requirements, providing the user with a fast, simple-to-use

analyzer.

Features:

• CO2 0 – 100%

• Options for:

• O2 0 – 100%


32°F – 122°F (0°C – 50°C)

• Humidity Sensor 0 – 100%


Benefts:

• Improved accuracy on CO2

readings

• Quick verication of CO2 levels


temperature probes

• Large data storage with software

• Easy to read large well-lit

display


Applications:

• IVF

• Research

• Laboratories

• Medical

Applications:

• Food Processing

• Research

• Brewing

• Medical

RENTAL


10/10


G150 CO2 Indoor Air Quality

Analyzer

The G150 CO2 Analyzer is designed to monitor CO2 for all

indoor air quality applications. It was developed using the latest

technology and specications requirements, providing the user

with a fast, simple to use, and accurate piece of the environmental

eld kit.

Features:

• CO2 0 – 10,000 ppm

• Options for:

• O2 0 – 100%


32°F – 122°F (0°C – 50°C)


• Humidity sensor 0 – 100%

Benefts:

• Improved accuracy on CO2readings

• Quick verication of CO2 levels

for site audits


temperature probes

• Large data storage with software

• Easy to read, large, well-lit display


G210 N2O 0-100% Gas Analyzer

The G210 is specically designed for highly accurate

measurement and verication of the quality of piped N2O and O2

medical gases in hospitals.

Features:

• 0 – 100% N2O

• 0 – 100% O2

• 0 – 500 ppm CO (optional)

• 0 – 2,000 ppm CO2

• Data storage with site & ID

input

• User alarms

Benefts:

• 4 gases measured in one

analyzer

• Easy user calibration

• Quick verication of gas quality

• Enter specic site & IDs for

monitoring points

• Identify contaminants CO and

CO2

Applications:

• Hospital piped gases

• Leak detection

Applications:

• General IAQ

• Site Audits

• Laboratories

• Medical

G200 N2O 0-1,000 ppm Gas

Analyzer

The G200 N2O analyzer is designed to safety check background

and breathing zone levels of N2O (0–1,000ppm).

Features:

• 0 – 1,000 ppm N20

• Storage for 1000 readings

• TWA calculated

• Leak detection

• User settable alarms

• Data download for graphing

and reporting

Benefts:

• Accurate verication of

exposure limits

• Dual purpose background

analyzer or personal analyzer

• Leak detection for N2O storage

• Highly portable

Applications:

• Operating Rooms

• Dental Practices

• Veterinary Clinics

• X-ray Departments

The TVA-1000B is the only over the shoulder portable vapour

analyzer that offers both PID (Photoionization Detection) and

FID (Flame Ionization Detection). Users can measure a wide

variety of organic vapours over an impressive dynamic range

(0-50,000 ppm). The FID operates by breaking hydrogen-

carbon bonds and is not limited by the ionization potential of

the molecule.

Features:

• Dual simultaneous FID/PID orsingle FID detectors

• Portable and

lightweight

• Multiple response

factors and curves

• Multi-point

calibration

• Eight

programmable

location labels

• On-board datalogging

Thermo Scientifc TVA-1000BPortable FID/PID

FLAME IONIZATION

DETECTORS

CDN CCI Specialty Gas Detection

Documents