-
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan
Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000
800 553-NETS (6387)Fax: 408 527-0883
Catalyst 4500 Series Switch Cisco IOS Command ReferenceRelease
15.0(2)SG
Text Part Number: OL-23829-01
-
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN
THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,
INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE
ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION
OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING
PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH
THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU
ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,
CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an
adaptation of a program developed by the University of California,
Berkeley (UCB) as part of UCBs public domain version of the UNIX
operating system. All rights reserved. Copyright 1981, Regents of
the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES
AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH ALL FAULTS.
CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR
TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY
INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING
OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR
ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
CCDE, CCENT, CCSI, Cisco Eos, Cisco Explorer, Cisco
HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse
Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco
StadiumVision, Cisco TelePresence, Cisco TrustSec, Cisco Unified
Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good,
Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video
(Design), Instant Broadband, and Welcome to the Human Network are
trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco
Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco
Store, Flip Gift Card, and One Million Acts of Green are service
marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing
the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP,
CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo,
Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems,
Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,
Collaboration Without Limitation, Continuum, EtherFast,
EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker,
iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link,
LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX,
Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels,
PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA,
SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the
WebEx logo are registered trademarks of Cisco and/or its affiliates
in the United States and certain other countries.
All other trademarks mentioned in this document or website are
the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and
any other company. (1002R))
Catalyst 4500 Series Switch Cisco IOS Command Reference
Copyright 19992011 Cisco Systems, Inc. All rights reserved
-
Catalyst 4500 Series Switch OL-22172-01
packet-offset (netflow-lite sampler submode)packet-rate
(netflow-lite sampler submode)packet-section size (netflow-lite
sampler submodeport-channel standalone-disableqos account layer-all
encapsulation
sampler (netflow-lite monitor submode))C H A P T E R
Catalyst 4500 Series IOS Commands
New Commandsaverage-packet-size (netflow-lite monitor
submode)clear ip wccpclear netflow-lite exporter statisticsclear
netflow-lite monitor statistics interface
cos (netflow-lite exporter submode)destination (netflow-lite
exporter submode)dscp (netflow-lite exporter
submode)export-protocol (netflow-lite exporter submode)exporter
(netflow-lite monitor submode)hw-module system max-queue-limitip
admission proxy http refresh-allip wccp check services all
ip wccp group-listenip wccp redirectip wccp redirect exclude
innetflow-lite exporternetflow-lite monitornetflow-lite sampler
options timeout (netflow-lite exporter submode)-1Cisco IOS
Command ReferenceRelease 15.0(2)SG
-
Chapter show ip wccpshow netflow-lite exporter
show netflow-lite monitorshow netflow-lite samplersource
(netflow-lite exporter
submode)source-interfacesource-ip-addresstemplate data timeout
(netflow-lite exporter submode)transport udp (netflow-lite exporter
submode)transport udp load-share (netflow-lite exporter submode)ttl
(netflow-lite exporter submode)vrf (netflow-lite exporter
submode)
Revised Commandsauthentication eventip wccp
private-vlanrep admin vlanrep block portrep lsl-age-timerrep
preempt delayrep preempt segment
rep segment
rep stcn
show interfaces switchportshow vlan private-vlan
A Commandsaaa accounting dot1x default start-stop group
radiusaaa accounting system default start-stop group radiusclear
mac-address-tableaccess-group modeaccess-list hardware capture
modeaccess-list hardware entriesaccess-list hardware
regionaction
applyancp client server-2Catalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter ancp mode clientapply
arp access-listattach moduleauthentication
control-directionauthentication critical recovery
delayauthentication eventauthentication fallbackauthentication
host-modeauthentication openauthentication orderauthentication
periodicauthentication port-controlauthentication priority
authentication timerauthentication violationauto qos voip
auto-sync
average-packet-size (netflow-lite monitor submode)
C Commandscall-home (global configuration)call-home
requestcall-home sendcall-home send alert-groupcall-home
testchannel-group
channel-protocolcisp enableclass-map
clear counters clear errdisableclear hw-module slot
passwordclear interface gigabitethernet clear interface vlan clear
ip access-template
clear ip arp inspection log-3Catalyst 4500 Series Switch Cisco
IOS Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter clear ip arp inspection statisticsclear ip dhcp snooping
bindingclear ip dhcp snooping databaseclear ip dhcp snooping
database statisticsclear ip igmp group
clear ip mfib countersclear ip mfib fastdropclear ip wccp
clear lacp countersclear netflow-lite exporter statisticsclear
netflow-lite monitor statistics interface
clear nmsp statisticsclear mac-address-table dynamicclear
pagp
clear port-securityclear pppoe intermediate-agent
statisticsclear qos
clear vlan countersclear vmps statisticscontrol-plane
cos (netflow-lite exporter submode)counter
D Commandsdebug adjacency debug backup debug condition interface
debug condition standby debug condition vlandebug dot1xdebug
etherchnl debug interface debug ip dhcp snooping eventdebug ip dhcp
snooping packetdebug ip verify source packetdebug ipcdebug
lacp-4Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter debug monitor debug nmspdebug nvram debug pagp debug
platform packet protocol lacpdebug platform packet protocol
pagpdebug pmdebug port-securitydebug pppoe intermediate-agentdebug
redundancydebug spanning-tree debug spanning-tree backbonefast
debug spanning-tree switch debug spanning-tree uplinkfast debug
sw-vlan debug sw-vlan ifs debug sw-vlan notification debug sw-vlan
vtpdebug udlddebug vqpcdefine interface-range denydestination
(netflow-lite exporter submode)diagnostic fpga soft-error
recoverdiagnostic monitor actiondiagnostic startdot1x auth-fail
max-attemptsdot1x auth-fail vlandot1x credentials (global
configuration)dot1x criticaldot1x critical eapoldot1x critical
recovery delaydot1x critical vlandot1x control-directiondot1x
guest-vlandot1x guest-vlan supplicantdot1x host-modedot1x
initialize-5Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter dot1x mac-auth-bypassdot1x max-reauth-reqdot1x
max-reqdot1x port-controldot1x re-authenticatedot1x
re-authenticationdot1x system-auth-controldot1x timeoutdscp
(netflow-lite exporter submode)duplex
E Commandserase
errdisable detect errdisable recoveryexport-protocol
(netflow-lite exporter submode)exporter (netflow-lite monitor
submode)
F Commandsflowcontrol
H Commandshardware statisticshw-module port-grouphw-module
powerhw-module system max-queue-limithw-module uplink mode
shared-backplanehw-module uplink select
I Commandsinstanceinterfaceinterface port-channel
interface range interface vlanip admission proxy http
refresh-all-6Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter ip arp inspection filter vlanip arp inspection limit
(interface)ip arp inspection log-bufferip arp inspection trustip
arp inspection validateip arp inspection vlanip arp inspection vlan
loggingip cef load-sharing algorithmip dhcp snoopingip dhcp
snooping bindingip dhcp snooping databaseip dhcp snooping
information optionip dhcp snooping information option
allow-untrustedip dhcp snooping limit rateip dhcp snooping trustip
dhcp snooping vlanip device tracking maximumip igmp filterip igmp
max-groupsip igmp profile
ip igmp query-interval ip igmp snooping ip igmp snooping
report-suppression
ip igmp snooping vlanip igmp snooping vlan explicit-tracking
ip igmp snooping vlan immediate-leaveip igmp snooping vlan
mrouter ip igmp snooping vlan static
ip local-proxy-arp ip mfib fastdropip route-cache flow
ip source bindingip sticky-arpip verify header vlan allip verify
sourceip verify unicast source reachable-viaip wccp
ip wccp check services all-7Catalyst 4500 Series Switch Cisco
IOS Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter ip wccp group-listenip wccp redirectp wccp redirect
exclude inipv6 mld snoopingipv6 mld snooping
last-listener-query-countipv6 mld snooping
last-listener-query-intervalipv6 mld snooping
listener-message-suppressionipv6 mld snooping
robustness-variableipv6 mld snooping tcnipv6 mld snooping vlanissu
abortversionissu acceptversionissu commitversionredundancy
config-sync mismatched-commandsissu loadversionissu runversionissu
set rollback-timer
L Commandsl2protocol-tunnell2protocol-tunnel
cosl2protocol-tunnel drop-thresholdl2protocol-tunnel
shutdown-thresholdlacp port-priority
lacp system-prioritylldp tlv-select power-managementlogging
event trunk-status global (global configuration)logging event
link-status global (global configuration)logging event link-status
(interface configuration)logging event trunk-status (interface
configuration)
M Commandsmatchmac access-list extendedmac-address-table
aging-timemac-address-table dynamic group protocolsmac
address-table learning vlan-8Catalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter mac-address-table notificationmac-address-table
staticmacro apply cisco-desktopmacro apply cisco-phonemacro apply
cisco-router
macro apply cisco-switchmacro auto devicemacro auto execute
(built-in function)macro auto execute (remotely-defined
trigger)macro auto execute (user-defined function)macro auto global
processingmacro auto mac-address-groupmacro auto processingmacro
auto sticky
macro global apply cisco-globalmacro global apply
system-cppmacro global descriptionmain-cpumatchmatch flow ip
mdix automedia-typemodemonitor session mtu
O Commandsoptions timeout (netflow-lite exporter submode)
N Commandsname
netflow-lite exporter
netflow-lite monitornetflow-lite sampler
P Commandspacket-offset (netflow-lite sampler submode)-9Catalyst
4500 Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter packet-rate (netflow-lite sampler submode)packet-section
size (netflow-lite sampler submode)pagp learn-method pagp
port-priority passive-interface
permitpolicy-map port-channel load-balanceport-channel
standalone-disableport-security mac-addressport-security
mac-address stickyport-security maximumpower dc inputpower
efficient-ethernet auto
power inlinepower inline logging globalport-security
mac-addresspower inline policeport-security mac-addresspppoe
intermediate-agent format-type (global)pppoe intermediate-agent
(interface)pppoe intermediate-agent limit ratepppoe
intermediate-agent trustpppoe intermediate-agent vendor-tag
strippppoe intermediate-agent (interface vlan-range)pppoe
intermediate-agent (interface vlan-range)priorityprivate-vlan
private-vlan mappingprivate-vlan synchronize
Q Commandsqos (global configuration mode) qos (interface
configuration mode)qos account layer-all encapsulationqos account
layer2 encapsulation
qos aggregate-policer -10Catalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter qos cos
qos dblqos dscpqos map cos
qos map dscp qos map dscp policedqos rewrite ip dscpqos
trust
qos vlan-based queue-limit
R Commandsredundancyredundancy force-switchoverredundancy
reloadremote login moduleremote-span
renew ip dhcp snooping databasereset
revision
S Commandssampler (netflow-lite monitor submode)service-policy
(interface configuration) service-policy (policy-map
class)service-policy input (control-plane)session moduleset
set cos
set dscpset precedenceset qos-group
shape (interface configuration)shell triggershow netflow-lite
exporter
show netflow-lite monitorshow netflow-lite sampler-11Catalyst
4500 Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter snmp ifindex clearsnmp ifindex persistsnmp-server enable
trapssnmp-server ifindex persistsnmp-server ifindex persist
compresssnmp trap mac-notification changesource (netflow-lite
exporter submode)spanning-tree backbonefastspanning-tree
bpdufilterspanning-tree bpduguardspanning-tree cost
spanning-tree etherchannel guard misconfigspanning-tree extend
system-idspanning-tree guardspanning-tree link-typespanning-tree
loopguard defaultspanning-tree modespanning-tree mstspanning-tree
mst configurationspanning-tree mst forward-timespanning-tree mst
hello-timespanning-tree mst max-agespanning-tree mst max-hops
spanning-tree mst rootspanning-tree pathcost methodspanning-tree
portfast (interface configuration mode)spanning-tree portfast
bpdufilter defaultspanning-tree portfast bpduguard
defaultspanning-tree portfast defaultspanning-tree port-priority
spanning-tree uplinkfast
spanning-tree vlan speed storm-control
storm-control broadcast include multicastswitchportswitchport
access vlan
switchport autostate exclude-12Catalyst 4500 Series Switch Cisco
IOS Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter switchport blockswitchport modeswitchport
port-securityswitchport private-vlan association trunkswitchport
private-vlan host-association
switchport private-vlan mappingswitchport private-vlan trunk
allowed vlanswitchport private-vlan trunk native vlan tag
switchport trunk switchport vlan mappingsystem mtu
Show Commandsshow access-group mode interfaceshow adjacencyshow
ancp multicast
show arp access-listshow authenticationshow auto install
status
show auto qosshow bootflash: show bootvar show cable-diagnostics
tdrshow call-home
show cdp neighborsshow class-mapshow diagnostic contentshow
diagnostic result moduleshow diagnostic result module testshow
diagnostic result module test 2show diagnostic result module test
3show dot1xshow environment
show errdisable detect show errdisable recovery show
etherchannel
show flowcontrol-13Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter show hw-module port-groupshow hw-module uplinkshow
idprom show interfaces show interfaces capabilitiesshow interfaces
counters show interfaces descriptionshow interfaces link
show interfaces mtushow interfaces private-vlan mappingshow
interfaces status
show interfaces switchport show interfaces transceivershow
interfaces trunk
show ip arp inspectionshow ip arp inspection logshow ip cef
vlan
show ip dhcp snoopingshow ip dhcp snooping bindingshow ip dhcp
snooping databaseshow ip igmp interface show ip igmp profileshow ip
igmp snooping
show ip igmp snooping membershipshow ip igmp snooping
mrouter
show ip igmp snooping vlanshow ip interfaceshow ip mfibshow ip
mfib fastdropshow ip mroute show ip source bindingshow ip verify
sourceshow ip wccpshow ipc
show ipv6 mld snoopingshow ipv6 mld snooping mroutershow ipv6
mld snooping queriershow ipv6 snooping counters-14Catalyst 4500
Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter show issu capabilityshow issu clients
show issu comp-matrixshow issu endpointsshow issu entities
show issu fsmshow issu messageshow issu negotiatedshow issu
rollback-timershow issu sessionsshow issu state
show l2protocol-tunnelshow lacpshow mabshow mac access-group
interfaceshow mac-address-table address show mac-address-table
aging-time show mac-address-table count show mac-address-table
dynamic show mac-address-table interface show mac address-table
learningshow mac-address-table multicast show mac-address-table
notificationshow mac-address-table protocolshow mac-address-table
static show mac-address-table vlanshow macro auto
mac-address-groupshow macro auto device show macro auto
interfaceshow module show monitor
show nmspshow pagp show policy-map
show policy-map control-planeshow policy-map interface show
policy-map interface vlan
show port-security-15Catalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter show powershow power inline police
show qosshow pppoe intermediate-agent interfaceshow qos
show qos aggregate policer show qos dblshow qos interface
show qos mapsshow redundancyshow redundancy config-syncshow
running-configshow slavebootflash:show slaveslot0:show slot0: show
spanning-tree show spanning-tree mst
show storm-controlshow system mtushow tech-support
show udld show vlan show vlan access-map
show vlan countersshow vlan dot1q tag nativeshow vlan groupshow
vlan internal usageshow vlan mapping
show vlan mtushow vlan private-vlanshow vlan remote-span
show vmpsshow vtp
T Commandstemplate data timeout (netflow-lite exporter
submode)test cable-diagnostics tdr-16Catalyst 4500 Series Switch
Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter traceroute mac
traceroute mac ip
transport udp (netflow-lite exporter submode)trust
ttl (netflow-lite exporter submode)tx-queue
U Commandsudld (global configuration mode) udld (interface
configuration mode) udld resetunidirectionalusername
V Commandsverifyvlan (VLAN Database mode)vlan access-map
vlan configurationvlan database vlan dot1q tag nativevlan
filtervlan group
vlan internal allocation policyvmps reconfirm (global
configuration)vmps reconfirm (privileged EXEC)vmps retry
vmps server
vrf (netflow-lite exporter submode)vtp (global configuration
mode) vtp client vtp domain vtp password vtp pruning vtp server
vtp transparent
vtp v2-mode-17Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-22172-01
-
Chapter -18Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-22172-01
-
OL-23829-01
ancp client server 2-17
ancp mode client 2-18
apply 2-19r 2-16
C O N T E N T S
Preface xxi
Audience xxi
Organization xxi
Related Documentation xxi
Conventions xxii
Notices xxiii
Obtaining Documentation and Submitting a Service Request
1-xxv
Command-Line Interface 1-1
Getting Help 1-1
How to Find Command Options 1-2
Understanding Command Modes 1-5
Using the No and Default Forms of Commands 1-6
Using the CLI String Search 1-6
Saving Configuration Changes 1-11
show platform Commands 1-11
Cisco IOS Commands for the Catalyst 4500 Series Switches 2-1
#macro keywords 2-2
aaa accounting dot1x default start-stop group radius 2-4
aaa accounting system default start-stop group radius 2-5
access-group mode 2-6
access-list hardware capture mode 2-8
access-list hardware entries 2-10
access-list hardware region 2-12
action 2-13
active 2-14
ancp client port identifieiiiCatalyst 4500 Series Switch Cisco
IOS Command ReferenceRelease 15.0(2)SG
-
Contents
arp access-list 2-21
attach module 2-22
authentication control-direction 2-23
authentication critical recovery delay 2-25
authentication event 2-26
authentication fallback 2-29
authentication host-mode 2-30
authentication open 2-32
authentication order 2-33
authentication periodic 2-35
authentication port-control 2-36
authentication priority 2-38
authentication timer 2-40
authentication violation 2-42
auto qos voip 2-44
auto-sync 2-47
average-packet-size (netflow-lite monitor submode) 2-48
bandwidth 2-50
call-home (global configuration) 2-53
call-home request 2-56
call-home send 2-58
call-home send alert-group 2-59
call-home test 2-61
channel-group 2-62
channel-protocol 2-64
cisp enable 2-66
class 2-67
class-map 2-70
clear counters 2-72
clear energywise neighbors 2-74
clear errdisable 2-75
clear hw-module slot password 2-76
clear interface gigabitethernet 2-77
clear interface vlan 2-78ivCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
clear ip access-template 2-79
clear ip arp inspection log 2-80
clear ip arp inspection statistics 2-81
clear ip dhcp snooping binding 2-82
clear ip dhcp snooping database 2-84
clear ip dhcp snooping database statistics 2-85
clear ip igmp group 2-86
clear ip igmp snooping membership 2-88
clear ip mfib counters 2-89
clear ip mfib fastdrop 2-90
clear ip wccp 2-91
clear lacp counters 2-92
clear mac-address-table 2-93
clear mac-address-table dynamic 2-95
clear netflow-lite exporter statistics 2-96
clear netflow-lite monitor statistics interface 2-97
clear nmsp statistics 2-98
clear pagp 2-99
clear port-security 2-100
clear pppoe intermediate-agent statistics 2-102
clear qos 2-103
clear vlan counters 2-105
clear vmps statistics 2-106
control-plane 2-107
cos (netflow-lite exporter submode) 2-109
counter 2-111
dbl 2-113
debug adjacency 2-115
debug backup 2-116
debug condition interface 2-117
debug condition standby 2-118
debug condition vlan 2-120
debug dot1x 2-122
debug etherchnl 2-123vCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
debug interface 2-125
debug ipc 2-126
debug ip dhcp snooping event 2-127
debug ip dhcp snooping packet 2-128
debug ip verify source packet 2-129
debug lacp 2-130
debug monitor 2-131
debug nmsp 2-132
debug nvram 2-133
debug pagp 2-134
debug platform packet protocol lacp 2-135
debug platform packet protocol pagp 2-136
debug pm 2-137
debug port-security 2-138
debug pppoe intermediate-agent 2-139
debug redundancy 2-141
debug spanning-tree 2-142
debug spanning-tree backbonefast 2-144
debug spanning-tree switch 2-145
debug spanning-tree uplinkfast 2-147
debug sw-vlan 2-148
debug sw-vlan ifs 2-149
debug sw-vlan notification 2-151
debug sw-vlan vtp 2-152
debug udld 2-153
debug vqpc 2-155
define interface-range 2-156
deny 2-157
destination (netflow-lite exporter submode) 2-159
destination address 2-161
destination message-size-limit bytes 2-163
destination preferred-msg-format 2-165
destination transport-method 2-167
diagnostic fpga soft-error recover 2-169viCatalyst 4500 Series
Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
diagnostic monitor action 2-170
diagnostic start 2-171
dot1x auth-fail max-attempts 2-172
dot1x auth-fail vlan 2-173
dot1x control-direction 2-174
dot1x credentials (global configuration) 2-175
dot1x critical 2-176
dot1x critical eapol 2-177
dot1x critical recovery delay 2-178
dot1x critical vlan 2-179
dot1x guest-vlan 2-180
dot1x guest-vlan supplicant 2-181
dot1x host-mode 2-182
dot1x initialize 2-184
dot1x mac-auth-bypass 2-185
dot1x max-reauth-req 2-186
dot1x max-req 2-187
dot1x port-control 2-189
dot1x re-authenticate 2-191
dot1x re-authentication 2-192
dot1x system-auth-control 2-193
dot1x timeout 2-194
dscp (netflow-lite exporter submode) 2-196
duplex 2-198
energywise (global configuration) 2-200
energywise (interface configuration) 2-202
energywise domain 2-205
energywise query 2-207
epm access control 2-211
erase 2-212
errdisable detect 2-215
errdisable recovery 2-217
export-protocol (netflow-lite exporter submode) 2-220viiCatalyst
4500 Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
exporter (netflow-lite monitor submode) 2-222
flowcontrol 2-224
hardware statistics 2-227
hw-module port-group 2-228
hw-module power 2-229
hw-module system max-queue-limit 2-230
hw-module uplink mode shared-backplane 2-231
hw-module uplink select 2-233
instance 2-235
interface 2-237
interface port-channel 2-239
interface range 2-240
interface vlan 2-242
ip admission proxy http refresh-all 2-243
ip arp inspection filter vlan 2-244
ip arp inspection limit (interface) 2-246
ip arp inspection log-buffer 2-248
ip arp inspection trust 2-250
ip arp inspection validate 2-251
ip arp inspection vlan 2-253
ip arp inspection vlan logging 2-255
ip cef load-sharing algorithm 2-257
ip device tracking maximum 2-259
ip dhcp snooping 2-260
ip dhcp snooping binding 2-261
ip dhcp snooping database 2-263
ip dhcp snooping information option 2-265
ip dhcp snooping information option allow-untrusted 2-267
ip dhcp snooping limit rate 2-268
ip dhcp snooping trust 2-269
ip dhcp snooping vlan 2-270
ip dhcp snooping vlan information option format-type circuit-id
string 2-272
ip igmp filter 2-274
ip igmp max-groups 2-275
ip igmp profile 2-276viiiCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
ip igmp query-interval 2-277
ip igmp snooping 2-279
ip igmp snooping report-suppression 2-281
ip igmp snooping vlan 2-283
ip igmp snooping vlan explicit-tracking 2-284
ip igmp snooping vlan immediate-leave 2-286
ip igmp snooping vlan mrouter 2-288
ip igmp snooping vlan static 2-290
ip local-proxy-arp 2-292
ip mfib fastdrop 2-293
ip multicast multipath 2-294
ip route-cache flow 2-296
ip source binding 2-298
ip sticky-arp 2-299
ip verify header vlan all 2-301
ip verify source 2-302
ip verify unicast source reachable-via 2-304
ip wccp 2-306
ip wccp check services all 2-309
ip wccp group-listen 2-311
ip wccp redirect 2-313
p wccp redirect exclude in 2-315
ipv6 mld snooping 2-317
ipv6 mld snooping last-listener-query-count 2-319
ipv6 mld snooping last-listener-query-interval 2-321
ipv6 mld snooping listener-message-suppression 2-323
ipv6 mld snooping robustness-variable 2-324
ipv6 mld snooping tcn 2-326
ipv6 mld snooping vlan 2-327
issu abortversion 2-329
issu acceptversion 2-331
issu commitversion 2-333
issu loadversion 2-335
issu runversion 2-337ixCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
issu set rollback-timer 2-339
l2protocol-tunnel 2-340
l2protocol-tunnel cos 2-342
l2protocol-tunnel drop-threshold 2-343
l2protocol-tunnel shutdown-threshold 2-345
lacp port-priority 2-347
lacp system-priority 2-348
lldp tlv-select power-management 2-349
logging event link-status global (global configuration)
2-350
logging event link-status (interface configuration) 2-351
logging event trunk-status global (global configuration)
2-353
logging event trunk-status (interface configuration) 2-354
mab 2-356
mac access-list extended 2-358
mac-address-table aging-time 2-361
mac-address-table dynamic group protocols 2-362
mac address-table learning vlan 2-365
mac-address-table notification 2-367
mac-address-table static 2-369
macro apply cisco-desktop 2-370
macro apply cisco-phone 2-372
macro apply cisco-router 2-374
macro apply cisco-switch 2-376
macro auto device 2-378
macro auto execute (built-in function) 2-380
macro auto execute (remotely-defined trigger) 2-383
macro auto execute (user-defined function) 2-385
macro auto global processing 2-387
macro auto mac-address-group 2-389
macro auto processing 2-390
macro auto sticky 2-392
macro global apply cisco-global 2-393
macro global apply system-cpp 2-394
macro global description 2-395
main-cpu 2-396xCatalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
match 2-397
match (class-map configuration) 2-399
match flow ip 2-402
mdix auto 2-406
media-type 2-408
mode 2-409
monitor session 2-411
mtu 2-417
name 2-418
netflow-lite exporter 2-419
netflow-lite monitor 2-421
netflow-lite sampler 2-423
nmsp 2-425
nmsp attachment suppress 2-426
options timeout (netflow-lite exporter submode) 2-427
packet-offset (netflow-lite sampler submode) 2-429
packet-rate (netflow-lite sampler submode) 2-430
packet-section size (netflow-lite sampler submode) 2-432
pagp learn-method 2-434
pagp port-priority 2-435
passive-interface 2-436
permit 2-439
police 2-441
police (percent) 2-446
police rate 2-448
police (two rates) 2-450
policy-map 2-454
port-channel load-balance 2-456
port-channel standalone-disable 2-458
port-security mac-address 2-459
port-security mac-address sticky 2-460
port-security maximum 2-461
power dc input 2-463
power efficient-ethernet auto 2-464
power inline 2-465xiCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
power inline consumption 2-467
power inline logging global 2-469
power inline police 2-470
power redundancy-mode 2-472
pppoe intermediate-agent (global) 2-474
pppoe intermediate-agent (interface) 2-475
pppoe intermediate-agent (interface vlan-range) 2-477
pppoe intermediate-agent format-type (global) 2-478
pppoe intermediate-agent format-type (interface) 2-480
pppoe intermediate-agent format-type (interface vlan-range)
2-481
pppoe intermediate-agent limit rate 2-482
pppoe intermediate-agent trust 2-483
pppoe intermediate-agent vendor-tag strip 2-484
priority 2-485
private-vlan 2-487
private-vlan mapping 2-491
private-vlan synchronize 2-494
profile 2-495
qos (global configuration mode) 2-497
qos (interface configuration mode) 2-498
qos account layer-all encapsulation 2-499
qos account layer2 encapsulation 2-501
qos aggregate-policer 2-503
qos control-packets 2-506
qos cos 2-509
qos dbl 2-510
qos dscp 2-513
qos map cos 2-514
qos map dscp 2-516
qos map dscp policed 2-518
qos rewrite ip dscp 2-520
qos trust 2-521
qos vlan-based 2-523
queue-limit 2-525
redundancy 2-527xiiCatalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
redundancy config-sync mismatched-commands 2-529
redundancy force-switchover 2-531
redundancy reload 2-532
remote login module 2-533
remote-span 2-534
renew ip dhcp snooping database 2-535
rep admin vlan 2-536
rep block port 2-537
rep lsl-age-timer 2-541
rep preempt delay 2-543
rep preempt segment 2-545
rep segment 2-546
rep stcn 2-549
reset 2-551
revision 2-552
sampler (netflow-lite monitor submode) 2-553
service-policy (interface configuration) 2-555
service-policy (policy-map class) 2-558
service-policy input (control-plane) 2-560
session module 2-562
set 2-564
set cos 2-566
set dscp 2-569
set precedence 2-572
set qos-group 2-575
shape (class-based queueing) 2-577
shape (interface configuration) 2-579
shell trigger 2-581
show access-group mode interface 2-583
show adjacency 2-584
show ancp multicast 2-586
show arp access-list 2-587
show authentication 2-588
show auto install status 2-592
show auto qos 2-593xiiiCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
show bootflash: 2-594
show bootvar 2-596
show cable-diagnostics tdr 2-597
show call-home 2-599
show cdp neighbors 2-604
show class-map 2-607
show diagnostic content 2-609
show diagnostic result module 2-611
show diagnostic result module test 2-615
show diagnostic result module test 2 2-617
show diagnostic result module test 3 2-619
show dot1x 2-621
show energywise 2-625
show environment 2-629
show errdisable detect 2-632
show errdisable recovery 2-633
show etherchannel 2-635
show flowcontrol 2-639
show hw-module port-group 2-641
show hw-module uplink 2-642
show idprom 2-643
show interfaces 2-649
show interfaces capabilities 2-652
show interfaces counters 2-656
show interfaces description 2-658
show interfaces link 2-659
show interfaces mtu 2-660
show interfaces private-vlan mapping 2-661
show interfaces status 2-662
show interfaces switchport 2-664
show interfaces transceiver 2-666
show interfaces trunk 2-671
show ip arp inspection 2-673
show ip arp inspection log 2-676
show ip cef vlan 2-678xivCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
show ip dhcp snooping 2-679
show ip dhcp snooping binding 2-681
show ip dhcp snooping database 2-684
show ip igmp interface 2-686
show ip igmp profile 2-688
show ip igmp snooping 2-689
show ip igmp snooping membership 2-693
show ip igmp snooping mrouter 2-695
show ip igmp snooping vlan 2-696
show ip interface 2-698
show ip mfib 2-701
show ip mfib fastdrop 2-703
show ip mroute 2-704
show ip source binding 2-709
show ip verify source 2-710
show ip wccp 2-713
show ipc 2-720
show ipv6 mld snooping 2-722
show ipv6 mld snooping mrouter 2-724
show ipv6 mld snooping querier 2-725
show ipv6 snooping counters 2-727
show issu capability 2-728
show issu clients 2-730
show issu comp-matrix 2-732
show issu endpoints 2-737
show issu entities 2-738
show issu fsm 2-739
show issu message 2-740
show issu negotiated 2-742
show issu rollback-timer 2-743
show issu sessions 2-744
show issu state 2-745
show l2protocol-tunnel 2-747
show lacp 2-750
show mab 2-753xvCatalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
show mac access-group interface 2-756
show mac-address-table address 2-757
show mac-address-table aging-time 2-759
show mac-address-table count 2-761
show mac-address-table dynamic 2-763
show mac-address-table interface 2-765
show mac address-table learning 2-767
show mac-address-table multicast 2-768
show mac-address-table notification 2-770
show mac-address-table protocol 2-772
show mac-address-table static 2-774
show mac-address-table vlan 2-777
show macro auto mac-address-group 2-779
show macro auto device 2-780
show macro auto interface 2-781
show module 2-782
show monitor 2-784
show netflow-lite exporter 2-786
show netflow-lite monitor 2-788
show netflow-lite sampler 2-790
show nmsp 2-791
show pagp 2-794
show policy-map 2-796
show policy-map control-plane 2-797
show policy-map interface 2-800
show policy-map interface vlan 2-803
show port-security 2-805
show power 2-812
show power inline police 2-820
show pppoe intermediate-agent interface 2-821
show qos 2-823
show qos aggregate policer 2-824
show qos dbl 2-825
show qos interface 2-826
show qos maps 2-828xviCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
show redundancy 2-830
show redundancy config-sync 2-834
show running-config 2-837
show shell functions 2-839
show shell triggers 2-840
show slavebootflash: 2-841
show slaveslot0: 2-843
show slot0: 2-845
show spanning-tree 2-847
show spanning-tree mst 2-852
show storm-control 2-855
show system mtu 2-858
show tech-support 2-859
show udld 2-861
show vlan 2-864
show vlan access-map 2-868
show vlan counters 2-869
show vlan dot1q tag native 2-870
show vlan group 2-871
show vlan internal usage 2-872
show vlan mapping 2-873
show vlan mtu 2-875
show vlan private-vlan 2-876
show vlan remote-span 2-878
show vmps 2-879
show vtp 2-881
snmp ifindex clear 2-885
snmp ifindex persist 2-887
snmp-server enable traps 2-889
snmp-server ifindex persist 2-891
snmp-server ifindex persist compress 2-892
snmp trap mac-notification change 2-893
source (netflow-lite exporter submode) 2-894
source-interface 2-896
source-ip-address 2-897xviiCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
spanning-tree backbonefast 2-898
spanning-tree bpdufilter 2-899
spanning-tree bpduguard 2-901
spanning-tree cost 2-902
spanning-tree etherchannel guard misconfig 2-903
spanning-tree extend system-id 2-904
spanning-tree guard 2-905
spanning-tree link-type 2-906
spanning-tree loopguard default 2-907
spanning-tree mode 2-908
spanning-tree mst 2-909
spanning-tree mst configuration 2-911
spanning-tree mst forward-time 2-913
spanning-tree mst hello-time 2-914
spanning-tree mst max-age 2-915
spanning-tree mst max-hops 2-916
spanning-tree mst root 2-917
spanning-tree pathcost method 2-919
spanning-tree portfast (interface configuration mode) 2-920
spanning-tree portfast bpdufilter default 2-922
spanning-tree portfast bpduguard default 2-924
spanning-tree portfast default 2-925
spanning-tree port-priority 2-926
spanning-tree uplinkfast 2-927
spanning-tree vlan 2-929
speed 2-931
storm-control 2-934
storm-control broadcast include multicast 2-936
subscribe-to-alert-group all 2-937
subscribe-to-alert-group configuration 2-939
subscribe-to-alert-group diagnostic 2-941
subscribe-to-alert-group environment 2-943
subscribe-to-alert-group inventory 2-945
subscribe-to-alert-group syslog 2-947
switchport 2-949xviiiCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
switchport access vlan 2-951
switchport autostate exclude 2-953
switchport block 2-955
switchport mode 2-956
switchport port-security 2-961
switchport private-vlan association trunk 2-966
switchport private-vlan host-association 2-968
switchport private-vlan mapping 2-970
switchport private-vlan trunk allowed vlan 2-973
switchport private-vlan trunk native vlan tag 2-976
switchport trunk 2-977
switchport vlan mapping 2-981
system mtu 2-983
template data timeout (netflow-lite exporter submode) 2-985
test cable-diagnostics tdr 2-987
traceroute mac 2-989
traceroute mac ip 2-992
transport udp (netflow-lite exporter submode) 2-995
transport udp load-share (netflow-lite exporter submode)
2-997
trust 2-999
ttl (netflow-lite exporter submode) 2-1001
tx-queue 2-1003
udld (global configuration mode) 2-1005
udld (interface configuration mode) 2-1007
udld reset 2-1009
unidirectional 2-1010
username 2-1011
verify 2-1013
vlan (VLAN Database mode) 2-1015
vlan access-map 2-1018
vlan configuration 2-1020
vlan database 2-1022
vlan dot1q tag native 2-1024
vlan filter 2-1026
vlan group 2-1027xixCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Contents
vlan internal allocation policy 2-1029
vmps reconfirm (global configuration) 2-1030
vmps reconfirm (privileged EXEC) 2-1031
vmps retry 2-1032
vmps server 2-1033
vrf (netflow-lite exporter submode) 2-1035
vtp (global configuration mode) 2-1037
vtp client 2-1038
vtp domain 2-1039
vtp password 2-1040
vtp pruning 2-1041
vtp server 2-1042
vtp transparent 2-1043
vtp v2-mode 2-1044
A P P E N D I X A Abbreviations A-1
I N D E XxxCatalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Preface
This preface describes the audience, organization, and
conventions of this publication, and provides information on how to
obtain related documentation.
AudienceThis publication is for experienced network
administrators who are responsible for configuring and maintaining
Catalyst 4500 series switches.
OrganizationThis publication is organized as follows:
Related DocumentationThe Catalyst 4500 series Cisco IOS
documentation set includes these publications:
Chapter Title Description
Chapter 1 Command-Line Interface Describes the Catalyst 4500
series switch CLI.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series
Switches
Lists all Catalyst 4500 series Cisco IOS commands alphabetically
and provides detailed information on each command.
Appendix A Abbreviations Defines the acronyms used in this
publication.xxiCatalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
Catalyst 4500 Series Switch Installation Guide Catalyst 4500
Series Switch Supervisor Engine Installation Note
Catalyst 4500 Series Switch Cisco IOS Software Configuration
Guide Catalyst 4500 Series Switch Cisco IOS System Message Guide
Release Notes for Catalyst 4500 Series Switch Software
-
PrefaceNote Access the Catalyst 4500 Series Switch documentation
library at the URL http://www.cisco.com/go/cat4500/docs
Other documents in the Cisco IOS documentation set include:
Cisco IOS Release 12.2 Configuration Guides Cisco IOS Release 12.2
Command ReferencesFor information about MIBs, refer to this
URL:http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
ConventionsThis document uses these conventions:
Convention Description
boldface font Boldface text indicates commands and keywords that
you enter literally as shown.
italic font Italic text indicates arguments for which you supply
values.[x] Square brackets enclose an optional element (keyword
or
argument).| A vertical line indicates a choice within an
optional or
required set of keywords or arguments.[x | y] Square brackets
enclosing keywords or arguments separated
by a vertical line indicate an optional choice.{x | y} Braces
enclosing keywords or arguments separated by a
vertical line indicate a required choice.[x {y | z}] Braces and
a vertical line within square brackets indicate a
required choice within an optional element.string A nonquoted
set of characters. Do not use quotation marks
around the string or the string will include the quotation
marks.
screen font Terminal sessions and information the system
displays are in screen font.
boldface screen font Information you must enter is in boldface
screen font.italic screen font Arguments for which you supply
values are in italic screen
font.^ The symbol ^ represents the key labeled Controlfor
example, the key combination ^D in a screen display means hold
down the Control key while you press the D key.
< > Nonprinting characters, such as passwords, are in
angle brackets.xxiiCatalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
PrefaceNotes use this convention:
Note Means reader take note. Notes contain helpful suggestions
or references to material not covered in the publication.
Cautions use this convention:
Caution Means reader be careful. In this situation, you might do
something that could result in equipment damage or loss of
data.
NoticesThe following notices pertain to this software
license.
OpenSSL/Open SSL ProjectThis product includes software developed
by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).This product includes cryptographic
software written by Eric Young ([email protected]).This product
includes software written by Tim Hudson ([email protected]).
License Issues
The OpenSSL toolkit stays under a dual license, i.e. both the
conditions of the OpenSSL License and the original SSLeay license
apply to the toolkit. See below for the actual license texts.
Actually both licenses are BSD-style Open Source licenses. In case
of any license issues related to OpenSSL please contact
[email protected].
OpenSSL License:
Copyright 1998-2007 The OpenSSL Project. All rights
reserved.Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:1. Redistributions of source code must retain
the copyright notice, this list of conditions and the
following disclaimer.2. Redistributions in binary form must
reproduce the above copyright notice, this list of conditions,
and the following disclaimer in the documentation and/or other
materials provided with the distribution.
[ ] Default responses to system prompts are in square
brackets.!, # An exclamation point (!) or a pound sign (#) at the
beginning
of a line of code indicates a comment line.
Convention DescriptionxxiiiCatalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Preface3. All advertising materials mentioning features or use
of this software must display the following acknowledgment: This
product includes software developed by the OpenSSL Project for use
in the OpenSSL Toolkit (http://www.openssl.org/).
4. The names OpenSSL Toolkit and OpenSSL Project must not be
used to endorse or promote products derived from this software
without prior written permission. For written permission, please
contact [email protected].
5. Products derived from this software may not be called OpenSSL
nor may OpenSSL appear in their names without prior written
permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the
following acknowledgment:This product includes software developed
by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.This product includes cryptographic software written by
Eric Young ([email protected]). This product includes software
written by Tim Hudson ([email protected]).
Original SSLeay License:
Copyright 1995-1998 Eric Young ([email protected]). All rights
reserved.This package is an SSL implementation written by Eric
Young ([email protected]).The implementation was written so as to
conform with Netscapes SSL.This library is free for commercial and
non-commercial use as long as the following conditions are adhered
to. The following conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just
the SSL code. The SSL documentation included with this distribution
is covered by the same copyright terms except that the holder is
Tim Hudson ([email protected]).Copyright remains Eric Youngs, and
as such any Copyright notices in the code are not to be removed. If
this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This
can be in the form of a textual message at program startup or in
documentation (online or textual) provided with the
package.Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:1. Redistributions of source code must retain
the copyright notice, this list of conditions and the
following disclaimer.2. Redistributions in binary form must
reproduce the above copyright notice, this list of conditions
and
the following disclaimer in the documentation and/or other
materials provided with the distribution.xxivCatalyst 4500 Series
Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
PrefaceObtaining Documentation and Submitting a Service
Request3. All advertising materials mentioning features or use of
this software must display the following acknowledgement:This
product includes cryptographic software written by Eric Young
([email protected]).The word cryptographic can be left out if the
routines from the library being used are not
cryptography-related.
4. If you include any Windows specific code (or a derivative
thereof) from the apps directory (application code) you must
include an acknowledgement: This product includes software written
by Tim Hudson ([email protected]).
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.The license and distribution terms for any publicly
available version or derivative of this code cannot be changed.
i.e. this code cannot simply be copied and put under another
distribution license [including the GNU Public License].
Obtaining Documentation and Submitting a Service RequestFor
information on obtaining documentation, submitting a service
request, and gathering additional information, see the monthly
Whats New in Cisco Product Documentation, which also lists all new
and revised Cisco technical documentation,
at:http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.htmlSubscribe
to the Whats New in Cisco Product Documentation as a Really Simple
Syndication (RSS) feed and set content to be delivered directly to
your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS Version 2.0.xxvCatalyst
4500 Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
PrefaceObtaining Documentation and Submitting a Service
RequestxxviCatalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Catalyst 4500 Series Switch OL-23829-01
? Lists all command ? Lists all
betweencommand keyword ? Lists all
betweencommands for the command mode. keywords for the command.
Leave a space the command and the question mark.arguments for the
keyword. Leave a space C H A P T E R
1Command-Line Interface
This chapter provides information for understanding and using
the Cisco IOS command-line interface (CLI) on the Catalyst 4500
series switch. This chapter includes the following sections:
Getting Help, page 1-1 How to Find Command Options, page 1-2
Understanding Command Modes, page 1-5 Using the No and Default
Forms of Commands, page 1-6 Using the CLI String Search, page 1-6
Saving Configuration Changes, page 1-11For an overview of the
Catalyst 4500 series switch Cisco IOS configuration, refer to the
Catalyst 4500 Series Switch Cisco IOS Software Configuration
Guide.
Getting HelpTo display a list of commands that you can use
within a command mode, enter a question mark (?) at the system
prompt. You also can display keywords and arguments for each
command with this context-sensitive help feature.
Table 1-1 lists commands you can enter to get help that is
specific to a command mode, a command, a keyword, or an
argument.
Table 1-1 Getting Help
Command Purpose
abbreviated-command-entry? Displays a list of commands that
begin with a particular character string. (Do not leave a space
between the command and question mark.)
abbreviated-command-entry Completes a partial command name.
1-1Cisco IOS Command ReferenceRelease 15.0(2)SG
the keyword and the question mark.
-
Chapter 1 Command-Line InterfaceHow to Find Command OptionsHow
to Find Command OptionsThis section provides an example of how to
display syntax for a command. The syntax can consist of optional or
required keywords. To display keywords for a command, enter a
question mark (?) at the command prompt or after entering part of a
command followed by a space. The Catalyst 4500 series switch
software displays a list of available keywords along with a brief
description of the keywords. For example, if you are in global
configuration mode and want to see all the keywords for the arap
command, you enter arap ?. Table 1-2 shows examples of how you can
use the question mark (?) to assist you in entering commands and
also guides you through entering the following commands: interface
gigabitethernet 1/1 channel-group 1 mode auto
Table 1-2 How to Find Command Options
Command Purpose
Switch> enablePassword: Switch#
Enter the enable command and password to access privileged EXEC
commands. You are in privileged EXEC mode when the prompt changes
to Switch#.
Switch# configure terminalEnter configuration commands, one per
line. End with CNTL/Z.Switch(config)#
Enter global configuration mode.You are in global configuration
mode when the prompt changes to Switch(config)#.
Switch(config)# interface gigabitethernet ? GigabitEthernet
interface number Switch(config)# interface gigabitethernet
1/1Switch(config-if)#
Enter interface configuration mode by specifying the Gigabit
Ethernet interface that you want to configure using the interface
gigabitethernet global configuration command.Enter a ? to display
what you must enter next on the command line. In this example, you
must enter an interface number from 1 to 9 in the format
module-number/port-number.You are in interface configuration mode
when the prompt changes to Switch(config-if)#.1-2Catalyst 4500
Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceHow to Find Command
OptionsSwitch(config-if)#?Interface configuration commands:
access-expression Build a bridge boolean access expression apollo
Apollo interface subcommands appletalk Appletalk interface
subcommands arp Set arp type (arpa, probe, snap) or timeout backup
Modify backup parameters bandwidth Set bandwidth informational
parameter bgp-policy Apply policy propogated by bgp community
string bridge-group Transparent bridging interface parameters
carrier-delay Specify delay for interface transitions cdp CDP
interface subcommands channel-group Etherchannel/port bundling
configuration clns CLNS interface subcommands cmns OSI CMNS
custom-queue-list Assign a custom queue list to an interface decnet
Interface DECnet config commands default Set a command to its
defaults delay Specify interface throughput delay description
Interface specific description dlsw DLSw interface subcommands dspu
Down Stream PU exit Exit from interface configuration mode
fair-queue Enable Fair Queuing on an Interface flowcontrol
Configure flow operation. fras DLC Switch Interface Command help
Description of the interactive help system hold-queue Set hold
queue depth ip Interface Internet Protocol config commands ipx
Novell/IPX interface subcommands isis IS-IS commands iso-igrp
ISO-IGRP interface subcommands
.
.
.
Switch(config-if)#
Enter a ? to display a list of all the interface configuration
commands available for the Gigabit Ethernet interface.
Switch(config-if)# channel-group ? group channel-group of the
interface
Switch(config-if)#channel-group
Enter the command that you want to configure for the controller.
In this example, the channel-group command is used. Enter a ? to
display what you must enter next on the command line. In this
example, you must enter the group keyword.Because a is not
displayed, it indicates that you must enter more information to
complete the command.
Table 1-2 How to Find Command Options (continued)
Command Purpose1-3Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceHow to Find Command
OptionsSwitch(config-if)# channel-group ? Channel group number
Switch(config-if)#channel-group
After you enter the group keyword, enter a ? to display what you
must enter next on the command line. In this example, you must
enter a channel group number from 1 to 256. Because a is not
displayed, it indicates that you must enter more information to
complete the command.
Switch(config-if)# channel-group 1 ? mode Etherchannel Mode of
the interface
Switch(config-if)#
After you enter the channel group number, enter a ? to display
what you must enter next on the command line. In this example, you
must enter the mode keyword.Because a is not displayed, it
indicates that you must enter more information to complete the
command.
Switch(config-if)# channel-group 1 mode ? auto Enable PAgP only
if a PAgP device is detected desirable Enable PAgP unconditionally
on Enable Etherchannel only
Switch(config-if)#
After you enter the mode keyword, enter a ? to display what you
must enter next on the command line. In this example, you must
enter the auto, desirable, or on keyword.Because a is not
displayed, it indicates that you must enter more information to
complete the command.
Switch(config-if)# channel-group 1 mode auto ?
Switch(config-if)#
In this example, the auto keyword is entered. After you enter
the auto keyword, enter a ? to display what you must enter next on
the command line. Because a is displayed, it indicates that you can
press Return to complete the command. If additional keywords are
listed, you can enter more keywords or press Return to complete the
command.
Switch(config-if)# channel-group 1 mode
autoSwitch(config-if)#
In this example, press Return to complete the command.
Table 1-2 How to Find Command Options (continued)
Command Purpose1-4Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceUnderstanding Command
ModesUnderstanding Command ModesThe Cisco IOS user interface on the
Catalyst 4500 series switch has many different modes. The commands
that are available to you depend on which mode you are currently
in. You can obtain a list of commands available for each command
mode by entering a question mark (?) at the system prompt.When you
start a session on the Catalyst 4500 series switch, you begin in
user mode, often called EXEC mode. Only a limited subset of the
commands are available in EXEC mode. In order to have access to all
commands, you must enter privileged EXEC mode. Normally, you must
enter a password to enter privileged EXEC mode. From privileged
EXEC mode, you can enter any EXEC command or enter global
configuration mode. Most EXEC commands are one-time commands, such
as show commands, which show the current status of a given item,
and clear commands, which clear counters or interfaces. The EXEC
commands are not saved across reboots of the Catalyst 4500 series
switch.The configuration modes provide a way for you to make
changes to the running configuration. When you save changes to the
configuration, the changes remain intact when the Catalyst 4500
series switch reboots. From global configuration mode, you can
enter interface configuration mode, subinterface configuration
mode, and other protocol-specific modes.ROM-monitor mode is a
separate mode used when the Catalyst 4500 series switch cannot boot
properly. If your Catalyst 4500 series switch or access server does
not find a valid system image when it is booting, or if its
configuration file is corrupted at startup, the system might enter
ROM-monitor mode. Table 1-3 provides a summary of the main command
modes.
Table 1-3 Summary of Main Command Modes
Command Mode Access Method Prompt Exit Method
User EXEC mode
Log in. Switch> Use the logout command.
Privileged EXEC mode
From user EXEC mode, enter the enable EXEC command.
Switch# To exit to user EXEC mode, enter the disable command.To
enter global configuration mode, enter the configure terminal
privileged EXEC command.
Global configuration mode
From privileged EXEC mode, enter the configure terminal
privileged EXEC command.
Switch(config)# To exit to privileged EXEC mode, enter the exit
or end command or press Ctrl-Z.To enter interface configuration
mode, enter an interface configuration command.
Interface configuration mode
From global configuration mode, enter by specifying an interface
with an interface command.
Switch(config-if)# To exit to global configuration mode, enter
the exit command. To exit to privileged EXEC mode, enter the exit
command or press Ctrl-Z.To enter subinterface configuration mode,
specify a subinterface with the interface command.1-5Catalyst 4500
Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceUsing the No and Default Forms
of CommandsFor more information on command modes, refer to the
Using the Command Line Interface chapter of the Configuration
Fundamentals Configuration Guide.
Using the No and Default Forms of CommandsAlmost every
configuration command has a no form. In general, enter the no form
to disable a function. Use the command without the keyword no to
reenable a disabled function or to enable a function that is
disabled by default. For example, IP routing is enabled by default.
To disable IP routing, specify the no ip routing command and
specify ip routing to reenable it. This publication provides the
complete syntax for the configuration commands and describes what
the no form of a command does.Some configuration commands have a
default form. The default form of a command returns the command
setting to its default settings. Most commands are disabled by
default, so the default form is the same as the no form. However,
some commands are enabled by default, with variables set to certain
default values. In these cases, the default form of the command
enables the command and returns its variables to their default
values.
Using the CLI String SearchThe pattern in the command output is
referred to as a string. The CLI string search feature allows you
to search or filter any show or more command output and allows you
to search and filter at --More-- prompts. This feature is useful
when you need to sort though large amounts of output, or if you
want to exclude output that you do not need to see.With the search
function, you can begin unfiltered output at the first line that
contains a regular expression you specify. You can then specify a
maximum of one filter per command or start a new search from the
--More-- prompt.
A regular expression is a pattern (a phrase, number, or more
complex pattern) software uses to match against show or more
command output. Regular expressions are case sensitive and allow
for complex matching requirements. Examples of simple regular
expressions are Serial, misses, and 138. Examples of complex
regular expressions are 00210..., ( is ), and [Oo]utput.
Subinterface configuration
From interface configuration mode, specify a subinterface with
an interface command.
Switch(config-subif)# To exit to global configuration mode,
enter the exit command.To enter privileged EXEC mode, enter the end
command or press Ctrl-Z.
ROM monitor From privileged EXEC mode, enter the reload EXEC
command. Press the Break key during the first 60 seconds while the
system is booting.
Rommon> To exit ROM-monitor mode, you must reload the image
by entering the boot command. If you use the boot command without
specifying a file or any other boot instructions, the system boots
from the default Flash image (the first image in onboard Flash
memory). Otherwise, you can instruct the system to boot from a
specific Flash image (using the boot system flash filename
command).
Table 1-3 Summary of Main Command Modes (continued)
Command Mode Access Method Prompt Exit Method1-6Catalyst 4500
Series Switch Cisco IOS Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceUsing the CLI String SearchYou
can perform three types of filtering: Use the begin keyword to
begin output with the line that contains a specified regular
expression. Use the include keyword to include output lines that
contain a specified regular expression. Use the exclude keyword to
exclude output lines that contain a specified regular
expression.You can then search this filtered output at the --More--
prompts.
Note The CLI string search function does not allow you to search
or filter backward through previous output; filtering cannot be
specified using HTTP access to the CLI.
Regular ExpressionsA regular expression can be a single
character that matches the same single character in the command
output or multiple characters that match the same multiple
characters in the command output. This section describes how to
create both single-character patterns and multiple-character
patterns and how to create more complex regular expressions using
multipliers, alternation, anchoring, and parentheses.
Single-Character Patterns
The simplest regular expression is a single character that
matches the same single character in the command output. You can
use any letter (A-Z, a-z) or digit (0-9) as a single-character
pattern. You can also use other keyboard characters (such as ! or
~) as single-character patterns, but certain keyboard characters
have special meaning when used in regular expressions. Table 1-4
lists the keyboard characters that have special meaning.
To enter these special characters as single-character patterns,
remove the special meaning by preceding each character with a
backslash (\). These examples are single-character patterns
matching a dollar sign, an underscore, and a plus sign,
respectively.\$ \_ \+
Table 1-4 Characters with Special Meaning
Character Special Meaning
. Matches any single character, including white space.* Matches
0 or more sequences of the pattern.+ Matches 1 or more sequences of
the pattern.? Matches 0 or 1 occurrences of the pattern.^ Matches
the beginning of the string.$ Matches the end of the string._
(underscore) Matches a comma (,), left brace ({), right brace (}),
left parenthesis ( ( ),
right parenthesis ( ) ), the beginning of the string, the end of
the string, or a space.1-7Catalyst 4500 Series Switch Cisco IOS
Command ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceUsing the CLI String SearchYou
can specify a range of single-character patterns to match against
command output. For example, you can create a regular expression
that matches a string containing one of the following letters: a,
e, i, o, or u. One and only one of these characters must exist in
the string for pattern matching to succeed. To specify a range of
single-character patterns, enclose the single-character patterns in
square brackets ([ ]). For example,[aeiou] matches any one of the
five vowels of the lowercase alphabet, while[abcdABCD] matches any
one of the first four letters of the lower- or uppercase
alphabet.You can simplify ranges by entering only the end points of
the range separated by a dash (-). Simplify the previous range as
follows:[a-dA-D] To add a dash as a single-character pattern in
your range, include another dash and precede it with a
backslash:[a-dA-D\-] You can also include a right square bracket
(]) as a single-character pattern in your range. To do so, enter
the following:[a-dA-D\-\]] The previous example matches any one of
the first four letters of the lower- or uppercase alphabet, a dash,
or a right square bracket. You can reverse the matching of the
range by including a caret (^) at the start of the range. This
example matches any letter except the ones listed: [^a-dqsv] This
example matches anything except a right square bracket (]) or the
letter d:[^\]d]
Multiple-Character Patterns
When creating regular expressions, you can also specify a
pattern containing multiple characters. You create
multiple-character regular expressions by joining letters, digits,
or keyboard characters that do not have special meaning. For
example, a4% is a multiple-character regular expression. Put a
backslash in front of the keyboard characters that have special
meaning when you want to remove their special meaning. With
multiple-character patterns, order is important. The regular
expression a4% matches the character a followed by a 4 followed by
a % sign. If the string does not have a4%, in that order, pattern
matching fails. This multiple-character regular expression:a.
uses the special meaning of the period character to match the
letter a followed by any single character. With this example, the
strings ab, a!, or a2 are all valid matches for the regular
expression. You can remove the special meaning of the period
character by putting a backslash in front of it. In the following
expression:a\. only the string a. matches this regular
expression.1-8Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceUsing the CLI String SearchYou
can create a multiple-character regular expression containing all
letters, all digits, all keyboard characters, or a combination of
letters, digits, and other keyboard characters. These examples are
all valid regular expressions:telebit 3107 v32bis
Multipliers
You can create more complex regular expressions to match
multiple occurrences of a specified regular expression by using
some special characters with your single- and multiple-character
patterns. Table 1-5 lists the special characters that specify
multiples of a regular expression.
This example matches any number of occurrences of the letter a,
including none:a*
This pattern requires that at least one letter a in the string
is matched: a+
This pattern matches the string bb or bab:ba?b This string
matches any number of asterisks (*):\** To use multipliers with
multiple-character patterns, you enclose the pattern in
parentheses. In the following example, the pattern matches any
number of the multiple-character string ab:(ab)* As a more complex
example, this pattern matches one or more instances of alphanumeric
pairs (but not none; that is, an empty string is not a
match):([A-Za-z][0-9])+ The order for matches using multipliers (*,
+, or ?) is to put the longest construct first. Nested constructs
are matched from outside to inside. Concatenated constructs are
matched beginning at the left side of the construct. Thus, the
regular expression matches A9b3, but not 9Ab3 because the letters
are specified before the numbers.
Table 1-5 Special Characters Used as Multipliers
Character Description
* Matches 0 or more single- or multiple-character patterns.+
Matches 1 or more single- or multiple-character patterns.? Matches
0 or 1 occurrences of the single- or multiple-character
patterns.1-9Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceUsing the CLI String
SearchAlternationAlternation allows you to specify alternative
patterns to match against a string. You separate the alternative
patterns with a vertical bar (|). Exactly one of the alternatives
can match the string. For example, the regular expression
codex | telebit matches the string codex or the string telebit,
but not both codex and telebit.
AnchoringYou can match a regular expression pattern against the
beginning or the end of the string. That is, you can specify that
the beginning or end of a string contains a specific pattern. You
anchor these regular expressions to a portion of the string using
the special characters shown in Table 1-6.
This regular expression matches a string only if the string
starts with abcd:^abcd In contrast, this expression is in a range
that matches any single letter, as long as it is not the letters a,
b, c, or d:[^abcd] With this example, the regular expression
matches a string that ends with .12:$\.12 Contrast these anchoring
characters with the special character underscore (_). The
underscore matches the beginning of a string (^), the end of a
string ($), parentheses ( ), space ( ), braces { }, comma (,), or
underscore (_). With the underscore character, you can specify that
a pattern exist anywhere in the string. For example:
_1300_ matches any string that has 1300 somewhere in the string.
The strings 1300 can be preceded by or end with a space, brace,
comma, or underscore. For example:{1300_ matches the regular
expression, but 21300 and 13000 do not. Using the underscore
character, you can replace long regular expression lists, such as
the following: ^1300$ ^1300(space) (space)1300 {1300, ,1300, {1300}
,1300, (1300 with _1300_
Table 1-6 Special Characters Used for Anchoring
Character Description
^ Matches the beginning of the string. $ Matches the end of the
string.1-10Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line InterfaceSaving Configuration
ChangesParentheses for RecallAs shown in the Multipliers section on
page 1-9, you use parentheses with multiple-character regular
expressions to multiply the occurrence of a pattern. You can also
use parentheses around a single- or multiple-character pattern to
remember a pattern for use elsewhere in the regular expression.To
create a regular expression that recalls a previous pattern, you
use parentheses to indicate a remembered specific pattern and a
backslash (\) followed by an integer to reuse the remembered
pattern. The integer specifies the occurrence of the parentheses in
the regular expression pattern. If you have more than one
remembered pattern in your regular expression, then \1 indicates
the first remembered pattern, \2 indicates the second remembered
pattern, and so on. This regular expression uses parentheses for
recall:a(.)bc(.)\1\2 This regular expression matches an a followed
by any character (call it character 1), followed by bc followed by
any character (character 2), followed by character 1 again,
followed by character 2 again. So, the regular expression can match
aZbcTZT. The software remembers that character 1 is Z and character
2 is T and then uses Z and T again later in the regular
expression.
Saving Configuration ChangesTo save your configuration changes
to your startup configuration so that they will not be lost if
there is a system reload or power outage, enter the following
command:Switch# copy system:running-config
nvram:startup-configBuilding configuration...
It might take a minute or two to save the configuration. After
the configuration has been saved, the following output
appears:[OK]Switch#
On most platforms, this step saves the configuration to NVRAM.
On the Class A Flash file system platforms, this step saves the
configuration to the location specified by the CONFIG_FILE
environment variable. The CONFIG_FILE environment variable defaults
to NVRAM.
show platform CommandsYou should use these commands only when
you are working directly with your technical support
representative, while troubleshooting a problem. Do not use these
commands unless your technical support representative asks you to
do so.
Note The show platform commands are not described in this
document.1-11Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 1 Command-Line Interfaceshow platform
Commands1-12Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Catalyst 4500 Series Switch OL-23829-01C H A P T E R
2Cisco IOS Commands for the Catalyst 4500 Series Switches
This chapter contains an alphabetical listing of Cisco IOS
commands for the Catalyst 4500 series switches. For information
about Cisco IOS commands that are not included in this publication,
refer to Cisco IOS Release 12.2 configuration guides and command
references at this
URL:http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_product_indices_list.html
2-1Cisco IOS Command ReferenceRelease 15.0(2)SG
-
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series
Switches#macro keywords#macro keywords To specify the help string
for the macro keywords, use the #macro keywords command.
#macro keywords [keyword1] [keyword2] [keyword3]
Syntax Description
Defaults This command has no default settings.
Command Modes Global configuration mode
Command History
Usage Guidelines If you do not specify the mandatory keywords
for a macro, the macro is to be considered invalid and fails when
you attempt to apply it. By entering the #macro keywords command,
you will receive a message indicating what you need to include to
make the syntax valid.
Examples This example shows how to specify the help string for
keywords associated with a macro named test:Switch(config)# macro
name testmacro name testEnter macro commands one per line. End with
the character '@'.#macro keywords $VLAN $MAXswichport@
Switch(config)# int gi1/1Switch(config-if)# macro apply test ?
WORD Keyword to replace with a value e.g $VLAN, $MAX
-
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series
Switches#macro keywordsRelated Commands Command Description
macro apply cisco-desktop Enables the Cisco-recommended features
and settings that are suitable for connecting a switch port to a
standard desktop.
macro apply cisco-phone Enables the Cisco-recommended features
and settings that are suitable for connecting a switch port to a
standard desktop and a Cisco IP phone.
macro apply cisco-router Enables the Cisco-recommended features
and settings that are suitable for connecting a switch port to a
router.
macro apply cisco-switch Enables the Cisco-recommended features
and settings that are suitable for connecting a switch port to
another switch.2-3Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series
Switchesaaa accounting dot1x default start-stop group radiusaaa
accounting dot1x default start-stop group radiusTo enable
accounting for 802.1X authentication sessions, use the aaa
accounting dot1x default start-stop group radius command. To
disable accounting, use the no form of this command.
aaa accounting dot1x default start-stop group radius
no aaa accounting dot1x default start-stop group radius
Syntax Description This command has no arguments or
keywords.
Defaults Accounting is disabled.
Command Modes Global configuration mode
Command History
Usage Guidelines 802.1X accounting requires a RADIUS server.This
command enables the Authentication, Authorization, and Accounting
(AAA) clients accounting feature to forward 802.1X update and
watchdog packets from the 802.1X supplicant (workstation client) to
the authentication (RADIUS) server. (Watchdog packets are defined
as EAPOL-LOGON, EAPOL-LOGOFF, and EAPOL-INTERIM messages.)
Successful authentication and authorization of the supplicant by
the authentication server is required before these packets are
considered valid and are forwarded. When the client is
reauthenticated, an interim-update accounting notice is sent to the
accounting server.
Examples This example shows how to configure 802.1X
accounting:Switch(config)# aaa accounting dot1x default start-stop
group radius
Note The RADIUS authentication server must be properly
configured to accept and log update or watchdog packets from the
AAA client.
Related Commands
Release Modification
12.2(18)EW Support for this command was introduced on the
Catalyst 4500 series switch.
Command Description
aaa accounting system default start-stop group radius
Receives the session termination messages after the switch
reboots.2-4Catalyst 4500 Series Switch Cisco IOS Command
ReferenceRelease 15.0(2)SG
OL-23829-01
-
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series
Switchesaaa accounting system default start-stop group radiusaaa
accounting system default start-stop group radiusTo receive the
session termination messages after the switch reboots, use the aaa
accounting system default start-stop group radius command. To
disable accounting, use the no form of this command.
aaa accounting system default start-stop group radius
no aaa accounting system default start-stop group radius
Syntax Description This command has no arguments or
keywords.
Defaults Accounting is disabled.
Command Modes Global configuration mode
Command History
Usage Guidelines 802.1X accounting requires the RADIUS
server.This command enables the AAA clients accounting feature to
forward 802.1X update and watchdog packets from the 802.1X
supplicant (workstation client) to the authentication (RADIUS)
server. (Watchdog packets are defined as EAPOL-LOGON, EAPOL-LOGOFF,
and EAPOL-INTERIM messages.) Successful authentication and
authorization of the supplicant by the authentication server is
required before these packets are considered valid and are
forwarded. When the client is reauthenticated, an interim-update
accounting notice is sent to the accounting server.
Examples This example shows how to generate a logoff after a
switch reboots:Switch(config)# aaa accounting system default
start-stop group radius
Note The RADIUS authentication server must be properly
configured to accept and log update or watchdog packets from the
AAA client.
Related Commands
Release Modification
12.2(18)EW Support for this command was introduced on the
Catalyst 4500 series switch.