Catalogue of optical equipment

2

www.optronik.com.pl

Fiber optic equipment catalogue 2010

Contents: FIBER OPTIC INTERCONNECTING COMPONENTS ................................................................................................. 3 PASSIVE DEVICES .................................................................................................................................................... 11 FIBER OPTIC DOME CLOSURES OZKS 160 ............................................................................................................ 17 FTTX INDOOR AND OUTDOOR BOXES ................................................................................................................... 23 DISTRIBUTION CABINETS FOR FTTX ...................................................................................................................... 50 PATCH PANELS 19” AND 21” OPD ........................................................................................................................... 55 SPLICE TRAYS KSP12, KSP24 ................................................................................................................................. 60 CLOSURES AND BOXES EQUIPMENT ..................................................................................................................... 62 CABLE SPARE LENGTHS MANAGEMENT EQUIPMENT ......................................................................................... 65 BURIED CABLE CONTAINERS HDPE ....................................................................................................................... 67

3

www.optronik.com.pl


FIBER OPTIC INTERCONNECTING COMPONENTS

CABLE ASSEMBLIES Fiber optic patch cords are made of highest quality SENKO and R&M components that conform to optical interface standards described in IEC/PN-EN 61754. Connector plugs are terminated on modern assembly line SENKO APC 8000 and verified by means of Data Pixel and EXFO measurement equipment: KONCENTRIK – measurement equipment for ferrule eccentricity verification as well as for eccentricity measurements and tuning of terminated connectors. DAISI / DASI MT – optical interferometer for 1,25 and 2,5 mm connectors and MT / MTRJ end face geometry measurements. IQS 12001 – optical connectors and passive devices insertion loss and return loss computer measurement test set; FOT150 – optical connectors insertion loss and return loss measurement test set kit. All offered connectors are compliant with the requirements for interfaces according to PN-EN 61754 and PN-EN 61755. All cable assemblies are compliant with performance standards series PN-EN 50377 and internal standards of Polish Telecom ZN-05/TPSA-044 for environment of U category according to PN-EN 61753-1 (uncontrolled environment, temperature range from –25 to +70°C, relative humidity 5%-95%). Customized products include connectors for use in environmental category E according to PN-EN 61753-1 (extreme environment, temperature range from –40 to +85°C, relative humidity 0%-98%, humidity condensation, industrial atmosphere). Plugs are offered in three attenuation grades: S-standard, P-premium, M-master. Standard – high performance plugs providing very good random mate attenuation performance, compliant with IEC and PN-EN standards as well as corporate TP S.A. standard. Performance of standard grade plugs fulfils requirements of most currently used fiber optic telecommunication systems (SDH, CWDM and CATV). Premium – plugs for most requiring customers, dedicated for use in high-end DWDM systems with high Power levels and in case of tight optical line loss budget. Master – selection plugs, dedicated for test and measurement and for extremely high optical Power levels in optical fibers (>30 dBm). Main geometrical parameters of SM PC and APC plugs

Parameter Standard Premium Master Radius of curvature PC 2,5/1,25 mm 10–25 mm/ 7–15mm Radius of curvature APC 5–12mm Fiber protrusion/undercut (spherical fit) PC and APC +50nm/ -50nm

Apex offset for PC and APC plugs < 50um (typical) ≤ 50um ≤ 30um APC 8° angle tolerance ± 0,3° ± 0,3° ± 0,2° PC angle tolerance ± 0,2° ± 0,2° ± 0,1° Key positioning tolerance for APC ± 0,5° ± 0,5° ± 0,3° Fiber core concentricity in ferrule for PC and APC plugs ≤ 1,5um ≤ 1,0um ≤ 0,3um

PC and APC key tuning No Yes Yes

4

www.optronik.com.pl


Measurement documentation Each plug is labeled with unique serial number together with manufacturing date (mm/yy) and has insertion loss and return loss test report (against reference plug). Each report contains full identification data for the final product. Master grade plugs are accompanied by concentricity and end face geometry test reports. Main optical parameters

Connector type Random mating Insertion loss

(PN-EN 61300-3-34), average, IL, dB

Insertion loss against reference plug (PN-EN 61300-3-4),

Maximum value, IL, dB

Return loss of random mating

(PN-EN 61300-3-6), Minimum value, ORL, dB

SM-PC

FC/PC SC/PC

E2000/PC MU/PC ST/PC LC/PC

grade S ≤ 0,20 (99%≤ 0,5)

grade P ≤ 0,12 (97%≤ 0,25)

grade M ≤ 0,10 (97%≤ 0,15)

grade S - 0,4 grade P - 0,25 grade M - 0,15

grade S – 45 grade P - 45 grade M – 50

SM-APC FC/APC SC/APC

E2000/APC

grade S ≤ 0,20 (99%≤ 0,5)

grade P ≤ 0,12 (97%≤ 0,25)

grade M ≤ 0,10 (97%≤ 0,15)

grade S - 0,4 grade P - 0,25 grade M - 0,15

grade S – 60 grade P – 60 grade M - 65

SM MT ANGLE

MPO MTP

≤ 0,35 max 0,7 No reference plug specification 55

MM

ST/PC FC/PC SC/PC LC/PC MU/PC

≤0,35

(95% ≤0,5) max 0,75

No reference plug specification 26

MM MT FLAT

MPO MTP

≤ 0,50 max 1,0 No reference plug specification 26

0102030405060708090

100

Matings number

Insertion Loss, dB

Random mating SC/APC StandardPN- EN 61300-3-34

average: 0,159 dBstd. deviation: 0,046 dB

0102030405060708090

100

Matings number

Insertion Loss, dB

Random mating SC/APC PremiumPN- EN 61300-3-34

average: 0,068 dBstd. deviation: 0,044 dB

5

www.optronik.com.pl


Marking

Ordering example J-SX-SM-SCP-SCP-U-24-100 Patch cord simplex terminated with SM SC/PC Premium plugs, fiber SM B2 according to PN-EN 60793-2-50, environment cat. U, reinforced cable of diameter 2,4 mm and length 10 m. P-SX-SMF28-E2AP-U-09-20 Pigtail simplex terminated with SM E2000/APC Premium plug, fiber SMF28, environment cat. U, buffered fiber 0,9 mm, length 2 m.

6

www.optronik.com.pl


FIBER OPTIC CONNECTORS AND ADAPTERS SPECIFICATION

SC connectors - PN-EN 61754-4

• SC/PC SM plugs • SC/APC SM plugs • SC/PC MM plugs • SC/PC duplex SM and MM plugs • SC/APC adapters • SC simplex SM and MM adapters • SC “small flange” adapters • SC duplex SM and MM adapters • Plugs terminated on reinforced cables 3/2,4/2

mm and buffer fibers 0,9 mm E2000 connectors – PN-EN 61754-15

• E2000/PC SM plugs • E2000/APC SM plugs • E2000/PC SM adapters • E2000/APC SM adapters • E-2000 ”small flange” adapters • Plugs terminated on 3/2,4/2 mm cables and

buffer fiber 0,9 mm FC connectors - PN-EN 61754-13

• FC/PC SM plugs • FC/APC SM plugs • FC/PC MM plugs • FC DHM adapters • FC/APC narrow key adapters • Plugs terminated on reinforced cables 3/2,4/2

mm and buffer fiber 0,9 mm

ST connectors - PN-EN 61754-3

• ST/PC SM plugs • ST/PC MM plugs • ST SM and MM adapters • Plugs terminated on cables 3/2,4 mm and

buffer fiber 0,9 mm

7

www.optronik.com.pl


LC connectors - PN-EN 61754-20

• LC/PC SM plugs • LC/PC MM plugs • LC/PC duplex SM and MM plugs • LC duplex SM and MM adapters • Terminated on cables 3,0/2,4/2,0/1,6 mm

and buffer fiber 0,9 mm

MU connectors - PN-EN 61754-6

• MU/PC SM plugs • MU/PC SM Duplex plugs • MU duplex SM adapters • Terminated on cables 3,0/2,4/2,0/1,6 mm

and buffer fiber 0,9 mm

MPO/MTP connectors – PN-EN 61754-7

• MTP and MPO 12 fibers SM (angle) plugs • MTP and MPO 12 fibers MM (flat) plugs • MTP/MPO adapters • Plugs terminated on reinforced ribbon

cables • Installation of fan-out 12 fibers SM and MM

Hybrid adapters

• FC/PC – SC/PC • FC/PC – ST/PC • FC/PC – E2000/PC • SC/PC – ST/PC • SC/PC – E2000/PC • SC/APC – FC/APC • SC/APC – E2000/APC • SC/PC – ST/PC Duplex • FDDI – ST/PC Duplex • ESCON – ST/PC Duplex

8

www.optronik.com.pl


FIBER OPTIC ATTENUATORS ATC

Fixed attenuators made of doped fiber, optimized for 1310, 1550, 1310/1550 nm and bands C and L.

• attenuation range: 1…10dB every 1dB, 12, 15, 20, 25dB;

• tolerance: 1…5dB±0,5dB, 6...25dB±10%; • operating wavelength 1310/1550nm±10nm; • ORL: PC >50dB, APC >65dB; • max optical power >30dBm (1W); • all connector types; • operating temperature range: -40...+75°C

ATS

Fused attenuators on reinforced cables. • attenuation range: 3...20dB; • tolerance: 3...5dB±0,5dB, 6...20dB±10%; • operating wavelength: 1310/1550±20nm; • all connector types; • any length; • operating temperature range: -25...+70°C

TRM Terminators

Plug terminators for back-reflection suppression. • ORL: PC >50dB, APC >65dB; • Max. optical power >30dBm (1W); • all main connector styles; • operating temperature range: -40...+75°C

Ordering example

ATS-10-SM-SCAP-E2AP-U-24-50 Fused attenuator 10dB, SM, terminated with SM SC/APC and E2000/APC Premium plugs, environment cat. U, made on reinforced simplex cable of diam. 2,4 mm and length 5 m.

9

www.optronik.com.pl


PRE-TERMINATED CABLES AND FIBERS MPO/MTP indoor cables

Indoor installation cables with MPO or MTP connectors. • MT/APC SM patch cords, female, 12 fibers ribbon

cable; • hybrid fan-out patch cords MT/APC SM

male/female - SC/E2A/LC/ST, 12 fibers, • MT/PC MM, male/female, 12 fibers ribbon cable; • hybrid fan-out patch cords MT/PC MM,

male/female - SC/ST/LC, 12 fibers; • MPO adapters; • optimal fan-out installation in adapted patch panels

and distribution boxes; • environment cat. C according to PN-EN 61753-1

(controlled environment) Indoor cables (multi-cables)

Pre-terminated indoor cables. • cables of 2-12 buffered fibers 0,9mm SM and

MM; • pigtails 0,9mm or 2mm jacket with simplex

connectors; • environment cat. C according to PN-EN

61753-1 (controlled environment)

Outdoor cables – tactical

Pre-terminated outdoor cables. • cables with polyurethane coating (PUR)

reinforced by Kevlar fibers, diam. 6 mm; • 2-4 fibers with 0,9mm buffer, SM or MM; • terminated with 2mm reinforced cables with

simplex connectors; • SM and MM LC duplex cables; • environment cat. E according to PN-EN

61753-1 (extreme environment) Outdoor trumpet cables, gelled

Pre-terminated outdoor cables • 2-12 fibers with 0,25 mm coating SM or MM, • terminated with threaded head for CATV

equipment (5/8” thread); • pigtails on 0,9mm buffer or; • environment cat. U according to PN-EN

61753-1 (uncontrolled environment)

10

www.optronik.com.pl


SWR – box optical network simulators Boxes with optical fiber for OTDR measurement for dead-zone suppression, dedicated for laboratory tests B&R and education.

• SM and MM optical fibers; • Total fibers length up to 4 km; • pigtails of length up to 5m; • terminated with any connectors; • durable and aesthetic housing made of

polycarbonate.

Optical network simulators

• OPD/6U – patch panel up to 40km fiber; • OPD/3U – patch panel up to 10 km fiber; • reels with z optical fiber SMF28e of length up

to 20km, terminated with pigtails of any connector type.

Ordering example

J-12-SM-MPOAF-MPOAM-C-RC-50 Indoor reinforced ribbon cable with 12 SM fibers with MPO angle connectors, female, environment cat. C according to PN-EN 61753-1, length 5,0m. F-12-SM-MPOAM-SCP-C-09-20 Fan-out, 12 SM fibers, with MPO angle connectors, male and SC/PC premium grade connectors, pigtails on 0,9mm buffered fiber 2 m length, environment cat. C according to PN-EN 61753-1. SWR-SMF28e-1000-FC-SCA-C-20-50 Box with fiber SMF28e 1000m length, environment cat. C according to PN-EN 61753-1, pigtails FC/PC and SC/APC, 2mm reinforced cable 5m length.

11

www.optronik.com.pl


PASSIVE DEVICES

WIDEBAND SPLITTERS Passive devices for coupling and splitting optical power propagating in optical fibers. We provide custom tuning of components, configuration and housing according to customer order.

Fused splitters FBT (Fused Biconic Taper)

• couplers for BPON, FTTX, CATV networks; • single-element couplers 1(2)x2, 1x3, 1x4 with

pigtails on bare fiber 0,25 mm or buffered fiber 0,9 mm;

• coupling ratio 1x2 from 01/99 to 50/50; • wideband 1310/1550±40nm or triple play

1310/1490/1550±40nm; • tree couplers up to 1x32 ports, symmetrical

and asymmetrical (tuned) power split; • box housing, pigtails terminated with any

connector type. Main parameters Optical power split 1x2 (50/50)

2x2 (50/50) 1x3 1x4

Spectral bandwidth, nm 1310/1490/1550 (±40nm) Insertion loss, max, dB 3,6 5,8 7,2 Non-uniformity, max, dB 0,3 1,0 1,0 PDL, max, dB 0,15 Thermal stability, max, dB/°C 0,002

Directivity, dB >55 (1x2) >65 (2x2) >50 >50

Operating temperature range, °C -40...+70 Fiber type (SM) Corning SMF-28

Housing dimensions / fiber diameter, mm Ø3.0 x 55/0.25mm Ø3.0 x 60/ 0.9mm

Ø3.5 x 45/0.25mm Ø4.0 x 70/0.9mm

Ø4.0 x 45/0.25mm Ø4.0 x 70/0.9mm

Planar technology splitters PLC

• Nx4 up to Nx64 ports (N=1,2), fan-out terminated with any connector type;

• Nx4 up to Nx64 ports (N=1,2), box modules, 0,9mm buffer or 2mm cable pigtails with any connector type;

• uniform power split in the wavelength band; • wide operating temperature band;

12

www.optronik.com.pl


Main parameters Optical power split 1x4 1x8 1x16 1x32 1x64 Spectral bandwidth, nm 1260...1360/1480...1610 Insertion loss, max, dB 7,3 10,7 13,7 17,7 21,6 Non-uniformity, max, dB 0,8 1,0 1,0 1,3 1,3 PDL, max, dB 0,2 Thermal stability, max, dB/°C 0,002 Return loss, minimum, dB 55 Operating temperature range, °C -40...+85 Fiber type (SM) Corning SMF-28e® Fiber Equivalent Splitter fan-out dimensions, mm 4 x 4 x 40 4 x 7 x 52 Splitter in box dimensions, mm 100x80x10 140x114x20 CWDM MULTIPLEXERS Passive devices for coupling and splitting optical signals at ITU-defined 20nm grid transmitted in 1310-1610nm band. CWDM channels parameters shall be equalized and insensitive to polarization and temperature. Operating bandwidth of CWDM systems ranges from 1430 to 1610nm and comprises 10 channels. It is possible to use additional channels from 1310nm band. We provide custom tuning of components, configuration and housing according to customer order. Main parameters Type MUX DEMUX Number of channels 10@1550+1@1310 10@1550+1@1310 Central wavelengths, nm 1310, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Interchannel grid, nm 20 Bandwidth @ 0,5 dB CWDM (1430-1610), nm > ITU +/- 7 Bandwidth @ 0,5 dB (1310), nm > ITU +/- 30 Insertion loss (1430-1610), max, dB 4.2 4.2 Insertion loss (1310), max, dB 1.8 1.8 Insertion loss (for a pair), max, dB 7.0 7.0 Channels non-uniformity for a module, dB 1.5 1.5 Channels non-uniformity for a pair of modules, dB 2.0 2.0 Directivity CWDM, min, dB 55 55 Directivity 1310, min, dB 60 65 Adjacent channels isolation CWDM, dB - 35 Non-adjacent channels isolation CWDM, dB - 45 Isolation (1310 to COM), min, dB 60 60 Input ORL, min, dB 45 45 PDL, max, dB 0,15 0,15 PMD, max, ps 0,1 0,1 Thermal stability, dB/°C 0,005 0,005 Thermal drift, nm/°C 0,005 0,005 Optical power, max, mW/dBm 400/26 Operating temperature range, °C -10...+60 Housing dimensions/fiber diameter, mm 160×120×10/0.9mm buffer

13

www.optronik.com.pl


WDM TRIPLEXER Bidirectional 1x2 WDM operating in passive FTTH networks; Triple Play signals division 1490nm and 1550nm downstream and 1310nm upstream.

Main parameters Type FTTX WDM Pass bandwidth, nm 1550...1560 Reflection bandwidth, nm 1260...1360&1480...1500 Insertion loss, max, dB 1,0 Isolation, min, dB 30 Directivity, min, dB 50 Return loss, min, dB 50 PDL, max, dB 0,2 PMD, max, ps 0,2 Optical power, max, mW 300 Operating temperature range, °C -10...+60 SM fiber type SMF-28 Housing dimensions/fiber diameter mm Ø5.5x35/0.25mm bare fiber;

WDM FILTERS Passive devices for coupling and splitting optical signals of different wavelength propagating in optical fibers. We provide custom tuning of components, configuration and housing according to customer order. WDM FBT (Fused Biconic Taper)

• good transmission parameters and stability; • single-element WDM 1x2 1310/1550, pigtails with

0,25 mm bare fiber, 0,9 mm buffer or 2,0 mm reinforced cable, terminated with any connector type

Main parameters Type Standard Isolation High Isolation Configuration 1x2, 2x2 Spectral bandwidth, nm 1295...1325/1528...1565 Insertion loss, max, dB (1295...1325nm/1528...1565nm) 0,3 0,7

Excess loss dependent on wavelength and temperature, max, dB 0,3 0,3

Isolation, minimum, dB 17 34 PDL, max, dB 0,1 0,2 Directivity, minimum, dB 55 Optical power, max, mW 500 Operating temperature range, °C -10...+60 Fiber type SM Corning SMF-28 Housing dimensions/fiber diameter, mm Ø3.0x55/0.25mm; Ø3.0x55/0.9mm; 6.4x12x96/3mm

14

www.optronik.com.pl


WDM – high isolation

• excellent transmission parameters; • narrow operating temperature range; • pigtails with bare or buffered fiber, terminated with

any connector type; Main parameters Type FWDM HWDM

Transmission channel bandwidth @λ1,nm 1530...1570 (Type 13/15) 1470...1510 (Type 13/14)

1260...1360 (Type13/15)

1520...1600 (Type 15/13)

Reflection channel bandwidth @λ2,nm 1290...1330 1520...1600 (Type 13/15)

1260...1360 (Type 15/13)

Directivity, min, dB 55 55 Return loss, minimum, dB 45 50 PDL, max, dB 0,2 0,2 PMD, max, ps 0,2 0,05 Optical power, max, mW 300 500 Operating temperature range, °C -10...+60 Fiber type SM Corning SMF-28 Fiber equivalent

Housing dimensions/fiber diameter, mm Ø5,5x35/0.25mm; Ø5,5x50/0.9mm

OPTICAL ISOLATORS Passive devices dedicated for non-reflective attenuation of optical signal of specified wavelength for all polarization states. Main parameters Type PSI single stage PSI dual stage Central wavelength λc, nm 1310, 1490 or 1550 Isolation (23°C, λc±15nm, all polarization states), minimum, dB 32 45 Insertion loss (-5...+70°C, λc±20nm, all polarization states), max, dB 0,5 0,6

ORL (input/output), minimum, dB 60/55 60/55 PDL, max, dB 0,1 0,15 PMD, max, ps 0,2 0,07 Optical power, max, mW 300 300 Operating temperature range, °C -10...+60 Fiber type SM Corning SMF-28 Housing dimensions/fiber diameter, mm Ø5.5x55/0.25mm

15

www.optronik.com.pl


PASSIVE DEVICES HOUSING VARIANTS Fiber optic equipment manufactured by OPTRONIK allows for various applications of passive devices in fiber optic telecom networks; PON, FTTx, CATV, LAN/WAN in different environmental conditions. Our offer comprises wide range of outdoor closures and distribution frames. The splice organizers are dedicated for installation of large-sized passive components.

Passive devices in box housing

• BB – box type module sized 140x100x20mm with pigtails on buffered fiber 0,9 mm or reinforced cable 2,0 mm terminated with any connector type or not connectorized.

• LP – box type module sized 100x80x10mm with pigtails on buffered fiber 0,9 mm or reinforced cable 2,0 mm terminated with any connector type or not connectorized.

• MB – box type module sized 100x20x10mm with pigtails on buffered fiber 0,9 mm or reinforced cable 2,0 mm terminated with any connector type or not connectorized.

16

www.optronik.com.pl


ACCESSORIES FOR CONNECTORS AND OPTICAL COMPONENTS

Isopropyl alcohol (IPA)

• bottle 1L • dispenser 200ml

Compressed air for optical components

• dispenser 400ml

Hermetic dispenser for IPA

• capacity 100ml

Lint-free tissues

• package 100 pcs

Cleaning tape in cassettes

• Cletop-S • Clean-Core

Cleaning sticks for plugs and adapters

• 2,5mm • 1,25mm

Polishing films for FO connectors

• rough • precision • final

Epoxies for fiber optic connectors:

• Epotek 353 - 2g

17

www.optronik.com.pl


FIBER OPTIC DOME CLOSURES OZKS 160 Fiber optic dome closures OZKS 160 are universal enclosures for aerial, underground, buried and fiber optic ADSS cables, for all kinds of telecommunication networks. The closure protects fiber connection points from environmental influence and gives possibility to control the optical fibers. The base and dome is made of high-density polyethylene (HDPE). Heat-shrinkable or mechanical sealing system are applied. Closures may be equipped with pressure control valve or external grounding clamp. The offer comprises three main dome closure types:

• OZKS 160N – closure up to 144 splices; • OZKS 160NK – closure do up to 72 splices; • OZKS 160ND – distribution closure up to 72 splices and 24 FO

connectors. Application range

OZKS160 closures can be used in environment categories: S (Subterranean environment), A (Aerial environment) and G (Ground environment) according to PN-EN 61753-1 (subterranean, aerial and other above-ground installations). OZKS160 closures have approval of MŁ and comply with TP S.A. industrial standard ZN-96/TP S.A.-009. Marking

18

www.optronik.com.pl


DOME CLOSURE OZKS 160N

Closure base has three round entry ports for cables of diameters 18 mm and oval port for two cables of diameters up to 20 mm. Heat-shrinkable or mechanical cable port sealing are applied along with main head sealing. Internal frame made of painted steel provides base for cable fixing, fiber optic trays and excess tubes of fiber optic cables (including uncut cables coming through oval entry port). Chassis enables fastening of three KSP 24 splice trays, with capacity from 24 heat shrinkable or mechanical splices (diameter from 2.4 to 3 mm) up to 48 fused splices (diameter 2.4±0.2 mm). Organizer trays enable installation of fiber optic passive devices and fiber ribbons. Organizer trays, sealing kits and other auxiliary outfit shall be ordered according to user needs. Dimensions: length 635mm, diameter 160mm. Ordering example

OZKS 160N-2/2S12-AB/D Dome closure, pass-drop, equipped with heat-shrinkable sealing kit for three round entry ports and for oval entry port, main sealing kit mechanical OZKS160D, two organizer trays KSP 24/24 for 24 heat-shrinkable fused splices each, self-sticking labels for fibers and cables. Technical data

19

www.optronik.com.pl


OZKS160 NK closure

Closure base incorporates three round entry ports for cables of diameter 18 mm and oval port for two cables of diameter up to 20 mm. Heat-shrinkable or mechanical cable port sealing are applied along with main head sealing. Internal frame made of painted steel provides foundations for fixing cables and fiber optic trays. Chassis enables fastening of three KSP 12 splice trays, with capacity from 12 heat shrinkable or mechanical splices (diameter from 2.4 to 3 mm) up to 24 fused splices (diameter 2.4±0.2 mm). Organizer trays enable installation of fiber optic passive devices and fiber ribbons. Organizer trays, sealing kits and other auxiliary outfit shall be ordered according to user needs. Dimensions: length 465mm, diameter 160mm.

Ordering example

OZKS 160NK-1/S24-3AM1/D Dome closure, equipped with three mechanical sealing kits for round entry ports OZKS160AM1, main mechanical sealing kit OZKS160D, one organizer tray KSP 12/24 for 24 heat-shrinkable splices, self-sticking labels for fibers and cables. Technical data

20

www.optronik.com.pl


DISTRIBUTION CLOSURE OZKS 160ND The OZKS 160ND distribution closure is based on the chassis of the OZKS 160N closure with internal frame for KSP12 organizer trays and with additional sliding support for 24 SC-E2000-LC Duplex adapters or 16 FC-ST adapters. Up to three organizer trays KSP12, with capacity of 12 fused or mechanical splices each (diameter from 2.4 to 3 mm) and up to 24 fused splices (diameter 2.4 ± 0.2 mm) may be fastened to main closure frame. Organizer trays, sealing kits and other auxiliary outfit shall be ordered according to user needs. Dimensions: length 635mm, diameter 160mm.

Ordering example

OZKS 160ND-P-2/S24-2AM1AM4/D-24SC Distribution closure with pressure control valve and support frame for 24 SC adapters, equipped with two mechanical sealing kits for single cable 12 mm in round AM1 entry ports and one kit for four 3-5mm cables in AM4 port, main mechanical sealing kit OZKS160D, two KSP 12/S24 organizer trays, self-sticking labels for fibers and cables. Technical data

21

www.optronik.com.pl


OZKS 160 closure equipment

OZKS160C – main heat-shrinkable sealing kit OZKS160D – main mechanical sealing kit

OZKS160A – heat-shrinkable sealing kit for three round cable ports Ø 8-18mm

OZKS160AMx – mechanical sealing kit for single round cable port Ø 8-18mm

• AM1 – one cable Ø 8-16mm, • AM3 – three cables Ø 6-8mm, • AM4 – four cables Ø 3-6mm;

OZKS160B – heat-shrinkable sealing kit for oval two-cable port Ø8-20mm

OZKS160BMx – mechanical sealing kit for oval two-cable/uncut cable port:

• BM1 – Ø8…12mm, • BM2 – Ø13…16mm.

22

www.optronik.com.pl


USKn – closure pole-mounting bracket USK – closure wall-mounting bracket

23

www.optronik.com.pl


FTTX INDOOR AND OUTDOOR BOXES

OUTLET BOX MSP1S Polycarbonate (PC) made box closures, highly durable (IK-08), non-flammable (UL94-5V), resistant to extreme environmental conditions, RoHS compliant, color grey RAL 7035. In standard make boxes have a screw-mounted dome and are prepared for wall mounting. Box make may be adjusted to meet individual customer requirements. Dimensions WxHxD, mm: 100x100x36 Assured bounding radius >20 mm. MSP1S/2 Outlet boxes with max. 2 SC optical ports or 4 LC Duplex ports. Boxes have a screw-mounted dome, wall side cable feedthrough and spare fiber lengths organizer with S6 holder for fused splices or F6 holder for mechanical Fibrlok splices. 1x2 WDM elements can be installed in the box. Adapters are mounted on a hinge with protective rubber bushing on a box side. SC and LC Duplex adapters can be equipped with protective flap. Boxes are prepared for wall mounting, particularly on a recessed box. Application range

MSP1S/2 boxes are designed for indoor applications (environment cat. C according to PN-EN 61753-1). Marking

Ordering example

MSP1S/2SC-S6 Outlet wall mounted box IP20, dimensions: 100x100x36 mm, wall-side cable feedthrough, 2 SC simplex ports, fiber organizer with a S6 flexible holder for six fused splices, prepared for wall mounting.

24

www.optronik.com.pl


Technical data

25

www.optronik.com.pl


BOX CLOSURES MSP1 MSP1 box closures made of polycarbonate(PC), highly durable (IK-08), non-flammable (UL94-5V), resistant to extreme environmental conditions, RoHS compliant, color: grey RAL 7035. In standard make boxes have a screw-mounted dome and are prepared for wall mounting. Box make may be adjusted to meet individual customer requirements. Dimensions WxHxD, mm: 130x130x36

26

www.optronik.com.pl


MSP1-12

Box with two cable glands or two single rubber feedthroughs can be used as a closure for 12 splices in LAN and FTTX networks. The boxes come with various glands’ and feedthroughs’ position configuration (single side, passing through, angled 90°). The MSPz-1 outdoor boxes with IP66 rating are equipped with an extra feedthrough for pressure compensation. The box is equipped with one organizer tray for spare tube/fiber lengths and one lifting organizer tray with one S12 or M10 module for splices and passive devices. One or two F6 holders for mechanical splices Fibrlok as an option. Standard outfit comprises cable fastening components and self-sticking labels for cables and fibers (OSN and OSK). MSP1FTTX-12

Box with IP54 equipped with rubber passing-drop feedthrough or four single passing type rubber feedthroughs. The feedthrough enables installation of passing cable Ø6-8 mm and up to 9 drop cables Ø3-5mm in FTTx distribution networks. The box is equipped with one organizer tray for spare tube/fiber lengths and one lifting organizer tray with one S12 or M10 module for splices and passive devices. One or two F6 holders for mechanical splices Fibrlok as an option. Standard outfit comprises cable fastening components and self-sticking labels for cables and fibers (OSN and OSK). MSP1/4-12

Box with IP20 equipped with one cable gland and support for 4 adapters on the side wall. The box is equipped with one organizer tray for spare tube/fiber lengths and one lifting organizer tray with one S12 or M10 module for splices and passive devices. One or two F6 holders for mechanical splices Fibrlok as an option. Standard outfit comprises cable fastening components and self-sticking labels for cables and fibers (OSN and OSK).

27

www.optronik.com.pl


MSP1-6

Box with two cable glands or two single rubber feedthroughs can be used as a closure for 6 splices in LAN and FTTX networks. The boxes come with various glands’ and feedthroughs’ position configuration (single side, passing through, angled 90°). The MSPz-1 outdoor boxes with IP66 rating are equipped with an extra pressure valve to prevent water condensing. The box is equipped with one organizer tray for spare tube/fiber lengths and one lifting organizer tray with one S6 holder for six fused splices. One F6 holder for mechanical splices Fibrlok as an option. Standard outfit comprises cable fastening components and self-sticking labels for cables and fibers (OSN and OSK). MSP1/2-6

Box rated IP20 equipped with one cable gland and a support for two adapters on the side wall. The box is equipped with one organizer tray for spare tube/fiber lengths and one lifting organizer tray with one S6 module for splices. One F6 holder for mechanical splices Fibrlok as an option. Standard outfit comprises cable fastening components and self-sticking labels for cables and fibers (OSN and OSK).

Application range

The MSP1 boxes are designed for indoor applications (cat. C according to PN-EN 61753-1). MSP1z with IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1). Outdoor applications of IP54 MSP1FTTX boxes (cat. A and G according to PN-EN 61753-1) are allowed when meeting local requirements. Marking

Ordering example

MSP1FTTX-S12 Box enclosure IP54, rubber feedthrough „passing-drop”, lifting organizer tray with a S12 splicing module, labels for fibers and cables OSN12, screws for wall mounting.

28

www.optronik.com.pl


Technical data MSP1-6 MSP1FTTX-12

MSP1-12 MSP1/4SC-12

29

www.optronik.com.pl


BOX ENCLOSURES AND DISTRIBUTION BOXES MSP1L Box type enclosures and distribution boxes sized 130x180x36mm, made of polycarbonate (PC), highly durable (IK-08), non-flammable (UL94-5V), resistant to extreme environmental conditions, RoHS compliant. Color: grey RAL 7035. In standard make boxes have a screw-mounted dome and are prepared for wall mounting. In MSP1LH make with heightened dome a patented Master Key lock can be applied. Box make may be adjusted to meet individual customer requirements.

MSP(z)1L-12 Box enclosure with cable glands (max. 6) can be used as a closure for up to 12 splices in LAN and FTTX networks. Cable glands position is variant according to different makes (on one side, straight through, angled 90°). MSPz 1L type outdoor enclosures IP66 are equipped with special pressure control feedthrough. Enclosure is equipped with organizer for spare tubes/fibers lengths storage and lifting organizer tray with one S12 or M10 splices module, optionally one or two F6 holders for Fibrlok mechanical splices. Basic equipment includes cable mounting elements and adhesive fiber and cable identification markers (OSN and OSK).

MSP1LFTTH-12

IP54 box enclosure equipped with rubber „passing-drop” feedthroughs, „passing” feedthroughs and cable glands. The „passing-drop” feedthrough allows to install an uncut (passing) cable with diameter of 5-9 mm and up to 9 individual cables with diameter of 3-5 mm (drop) in FTTX distribution networks. Individual „passing” feedthrough is designed for uncut cable installation as well. Enclosure is equipped with organizer for spare tubes/fibers lengths storage and lifting organizer tray with one S12 or M10 splices module, optionally one or two F6 holders for Fibrlok mechanical splices. Basic equipment includes cable mounting elements and adhesive fiber and cable identification markers (OSN and OSK).

30

www.optronik.com.pl


MSP1LH/4-6 Distribution box IP66 with 5-9 mm cable glands or IP54 with rubber feedthroughs/patented lock. Rubber feedthroughs enable installation of passing cables 5-10 mm and connectorized patch cords. The box has a support for four adapters and an organizer tray for cable fixing, splice holding and spare fiber lengths management. The organizer can be equipped with one S12 or S6 holder for fused splices or a F6 holder for mechanical Fibrlok splices as an option. Standard equipment covers cable installation elements and self-sticking labels for cables and fibers (OSN and OSK). Dimensions WxHxD, mm: 130x180x55.

Application range

MSP1L box enclosures are designed for indoor applications (cat. C according to PN-EN 61753-1). MSPz1 makes with cable glands are designed for outdoor applications (cat. A and G according to PN-EN 61753-1). Outdoor applications of IP54 MSP 1LFTTX with cable feedthroughs and patented security locks (cat. A and G according to PN-EN 61753-1) are allowed when meeting local requirements. Marking

Ordering example

MSP1LFTTX-S12 Box enclosure, IP54 make, two rubber passing-drop feedthroughs, screw fixed dome, cable and fiber organizer, lifting tray with a S12 holder, labels for cables and fibers OSN12, screws for wall mounting. MSP1LHK/4ST-S6 Box enclosure, IP54 make, two rubber passing feedthroughs or 5-9 mm cable glands, dome on hinges, patented lock, internal tray for 4 ST adapters, organizer with a S6 holder, labels for cables and fibers OSN12, screws for wall mounting.

31

www.optronik.com.pl


Technical data

Technical data

32

www.optronik.com.pl


Technical data MSP1LH/4 –6

33

www.optronik.com.pl


DISTRIBUTION BOXES FTB1 Box enclosures and distribution boxes, dimensions 180x130x45mm, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable (UL94-V0), resistant to extreme environmental conditions, RoHS compliant, rated IP54, color grey RAL 7035 The box has two wall-side cable inlets and two cable glands on the bottom side. Box cover is latch-fixed with optional patented Master Key system lock. In standard make boxes are prepared for wall mounting. Box make may be adjusted to meet individual customer requirements. FTB1/X

The box has two PA cable glands Ф5-9mm on the bottom side and a support for four adapters. Fiber organizer is adapted for 0.9 mm buffered fiber and has two S6 holders (for six fused splices each), optionally two F6 holders (for six mechanical Fibrlok splices each). Standard equipment covers cable installation elements and self-sticking labels for cables and fibers (OSN and OSK). Application range

The FTB1 boxes are designed for indoor applications (environment cat. C according to PN-EN 61753-1). Operating temperature range: -10…+60ºC, humidity up to 95%. Outdoor applications of IP54 FTB1 boxes (cat. A and G according to PN-EN 61753-1) are allowed when meeting local requirements. Marking

Ordering example

FTB1/4SC-2F6 Box enclosure IP54, two cable glands, internal support for 4 SC adapters, two holders for 6 Fibrlok splices, labels for cables and fibers OSN12, screws for wall mounting.

34

www.optronik.com.pl


Technical data

35

www.optronik.com.pl


DISTRIBUTION BOXES MSP2 Box enclosures and distribution boxes, dimensions WxHxD, mm: 175x175x75, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable (UL94-V0), resistant to extreme environmental conditions, RoHS compliant, color grey RAL 7035 In standard make the box has a screw-fixed cover and is prepared for wall mounting. Box make may be adjusted to meet individual customer requirements.

MSP2-12

Enclosure housing is rated IP65 equipped with two cable glands, which position can be configured on make if needed. The box has a buffered fiber organizer with a splice holder for 12 fused splices or two F6 holders for mechanical Fibrlok splices as an option. Standard equipment covers cable installation elements and self-sticking labels for cables and fibers (OSN and OSK). MSP2/X Distribution box housing is rated IP20 equipped with two cable glands, which position can be configured on make if needed and a support for 8 adapters on a side wall. The box has a buffered fiber organizer with a splice holder for 12 fused splices or two F6 holders for mechanical Fibrlok splices as an option. Standard equipment covers cable installation elements and self-sticking labels for cables and fibers (OSN and OSK).

Application range

The MSP2 enclosures and distribution boxes are designed for indoor applications (environment cat. C according to PN-EN 61753-1). Marking

Ordering example

MSP2/8SC-S12

Distribution box IP20, two cable glands, PS-010 support for eight SC-E2 adapters, one S12 splice tray, labels for cables and fibers OSN12, screws for wall mounting.

36

www.optronik.com.pl


Technical data MSP2/8

37

www.optronik.com.pl


BOX ENCLOSURES AND DISTRIBUTION BOXES MSP3 Box enclosures and distribution boxes, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable (UL94-5V), resistant to extreme environmental conditions, RoHS compliant, color grey RAL 7035. Boxes are equipped with KSP12 splice trays. In standard make the box has a screw-fixed cover and is prepared for wall mounting. Box make may be adjusted to meet individual customer requirements.

MSP3

Box enclosures, dimensions: 180x255x75mm with max. two KSP12 splice trays. In standard make the boxes are equipped with cable glands (three on the top and three on the bottom side). MSPz3 enclosures rated IP66 for outdoor applications are equipped with pressure control valve to prevent water condensing. Basic equipment includes: one splice tray, cable fixing and arrangement elements, labels for cables and fibers (OSN and OSK), wall mounting elements. MSP3H Box enclosures, dimensions: 180x255x100mm with max. three KSP12 splice trays. In standard make the boxes are equipped with cable glands (three on the top and three on the bottom side). In MSP3H type boxes an additional lifting support for splitter module can be installed in place of the third splice tray (max split 2x32). MSPz3H enclosures rated IP66 for outdoor applications are equipped with pressure control valve to prevent water condensing. Basic equipment includes: one splice tray, cable fixing and arrangement elements, labels for cables and fibers (OSN and OSK), wall mounting elements. MSP3FTTX

In MSP3FTTX type boxes a rubber passing-drop feedthrough IP54 is installed. The feedthrough enables installation of uncut cable Ø6-8 mm and up to 36 cables Ø3-5 mm. In MSP3FTTH type boxes an additional lifting support for splitter module can be installed in place of the third splice tray (max split 2x32). Basic equipment includes: one splice tray, cable fixing and arrangement elements, labels for cables and fibers (OSN and OSK), wall mounting elements.

38

www.optronik.com.pl


MSP3/X

Distribution boxes, dimensions: 180x255x75 mm. In MSP3.1 make the boxes are equipped with one KSP12 splice tray, one PS010 module – FC-ST or SC-E2 type installed on an internal support and three cable glands PA16 type 10-14 mm on top or bottom side. In MSP3.2 make the boxes are equipped with one KSP12 splice tray, one PS010 module – FC-ST or SC-E2 type installed on a side wall, three cable glands PA16 type 10-14 mm on top or bottom side. and optionally a pressure control valve. Basic equipment includes: one splice tray, cable fixing and arrangement elements, labels for cables and fibers (OSN and OSK), wall mounting elements. MSP3H/X

Distribution boxes, dimensions: 180x255x100 mm equipped with one KSP12 splice tray and an internal support for two PS-010 modules with 16-24 adapters and three cable glands PA16 type 10-14 mm on top or bottom side. In MSPz3H make rated P66 for outdoor applications the boxes are also equipped with pressure control valve. Basic equipment includes: one splice tray, cable fixing and arrangement elements, labels for cables and fibers (OSN and OSK), wall mounting elements.

Application range

All MSP3 makes are designed for indoor applications (cat. C according to PN-EN 61753-1). The MSPz3 makes rated IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1. Marking

Ordering example

MSPz3H/24SC-1/S24 Distribution box, IP66 – for outdoor applications, three cable glands, internal support with two PS-010 modules for 12SC Small Flange adapters, one KSP12/S24 organizer tray for 24 splices, self-sticking labels for cables and fibers OSN24, screws for wall mounting.

39

www.optronik.com.pl


Technical data MSP3

Technical data MSP3H

40

www.optronik.com.pl


Technical data MSP3 FTTX

Technical data MSP3.1/X

41

www.optronik.com.pl



Technical data MSP3H/X

42

www.optronik.com.pl


BOX ENCLOSURES AND DISTRIBUTION BOXES MSP4 Box enclosures and distribution boxes, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable (UL94-V0), resistant to extreme environmental conditions, RoHS compliant, color grey RAL 7035. Boxes are equipped with KSP12 splice trays. In standard make the box has a screw-fixed cover and is prepared for wall mounting. Box make may be adjusted to meet individual customer requirements.

MSP4

Box enclosures, dimensions: 190x380x130 mm with max. three KSP12 splice trays. In standard make the boxes are equipped with cable glands (PG16 type 10-14mm, four on the top and four on the bottom side). MSPz4 enclosures rated IP66 for outdoor applications are equipped with pressure control valve to prevent water condensing. Basic equipment includes: one splice tray, cable fixing and arrangement elements, labels for cables and fibers (OSN and OSK). MSP4/X

Distribution boxes, dimensions: 190x380x130 mm with max two KSP24 splice trays and internal support with PS-010 modules for 16-24 adapters and four cable glands (PA16 type 10-14mm on top or bottom side). MSPz4 enclosures rated IP66 for outdoor applications are equipped with pressure control valve to prevent water condensing. Basic equipment includes: one splice tray, cable fixing and arrangement elements, labels for cables and fibers (OSN and OSK).

Application range

All MSP4 makes are designed for indoor applications (cat. C according to PN-EN 61753-1). The MSPz4 makes rated IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1. Marking

Ordering example

MSPz4/24SC-1/2S24 Distribution box, IP66 – for outdoor applications, four cable glands, internal support with two PS-010 modules for 12SC-E2 Small Flange adapters, one KSP24/2S24 organizer tray for 48 splices, self-sticking labels for cables and fibers OSN24, screws for wall mounting.

43

www.optronik.com.pl


Technical data MSP4

Technical data MSP4 X

44

www.optronik.com.pl


DISTRIBUTION BOXES MSP5 Distribution boxes, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable (UL94-V0), resistant to extreme environmental conditions, RoHS compliant, color grey RAL 7035. Boxes are available with either screw-fixed cover or with cover on hinges with Master Key system lock. Boxes are prepared for wall mounting. Box make may be adjusted to meet individual customer requirements.

MSP5/X

Distribution boxes, dimensions: 270x380x130 mm, with max two KSP24 splice trays and an internal support with four PS-010 modules for 32-48 adapters. Boxes are equipped with cable glands: PG16 type 10-14mm, three on the top and three on the bottom side for cables feed and PG21 type 13-18mm max two on the top and two on the bottom side for patch cord bundle feed. Basic equipment includes: cable and patch cord fixing and arrangement elements, labels for cables and fibers (OSN and OSK) and wall mounting elements.

Application range

All MSP5 makes are designed for indoor applications (cat. C according to PN-EN 61753-1). Marking

Ordering example

MSP5/48SF-2/2S24-NYY Distribution box with cover on hinges with Master Key system lock, equipped with internal support with four PS-010 modules for 48 SC-E2 Small Flange type adapters, two KSP24/2S24 trays for 96 splices, self-sticking labels for cables and fibers OSN24, screws for wall mounting.

45

www.optronik.com.pl


Technical data MSP5

46

www.optronik.com.pl


MODULAR DISTRIBUTION BOXES PSN Distribution boxes, made of polycarbonate (PC), highly durable (IK-08), non-flammable (UL94-V0), resistant to extreme environmental conditions, RoHS compliant, color: grey RAL 7035, rated IP66 – for both indoor and outdoor applications. The boxes can be fixed to each other by their side walls in various combinations. In standard make boxes have a screw-mounted dome and are prepared for wall mounting. Optional equipment covers:

• covers on hinges, patented locks, • additional cable glands and feedthroughs (D1,D2

and P1,P2 type) and IP67 pressure control valve to prevent water condensing.

Basic PSN elements: • Cable termination boxes equipped with cable glands, holders for spare cable lengths storage, lifting splice

tray support which provides safe fiber spare lengths and fused splices storage. • Distribution boxes equipped with cable glands and cable bundles feedthroughs, holders for spare cable

lengths storage, and internal supporting elements for optical adapters installation. Box modules are fixed by their side walls. Internal cable communication is done by openings in the adjacent walls. Cable glands and feedthroughs can be placed on the top or bottom side of a box. As optional equipment the P1 and P2 feedthroughs can be applied to enable insertion of an uncut cable and extraction of cable bundles terminated with large sized optical connectors. The PSN distribution boxes are adaptable for modular extension, even when already installed in customer’s premises. Box make may be adjusted to meet individual customer requirements. Application range PSN makes rated IP65 are designed for indoor applications (cat. C according to PN-EN 61753-1) – central office, containers, cabling rooms etc. PSN makes rated IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1. PSN distribution boxes have approval of MŁ and comply with TP S.A. industrial standard ZN-96/TP S.A.-009 Marking

47

www.optronik.com.pl


PSN 8

Single-chamber distribution box, dimensions: 190x380x130mm suitable for installation of 16-24 connectors. Standard equipment:

• one organizer tray KSP24 for 24 or 48 splices (max 2 organizer trays);

• interconnection module support for two modules PS-010 (16-24 optical ports);

• one cable glands set – D2; • cables and bundles fastening and storing

components; • self-sticking labels for cables and fibers (OSN and

OSK); • components for wall mounting

PSN 16

Two-chamber distribution box of dimensions 380x380x130mm dedicated for installation of 24-36 fiber optic connectors. Standard outfit:

• one organizer tray KSP24 (max 3 organizer trays); • sliding support for three modules PS-010 (24-36

optical ports); • two cable glands sets – D1 and D2 • cables and bundles fastening and storing

components; • self-sticking labels for cables and fibers (OSN and

OSK) • components for wall mounting

PSN 32

Two-chamber distribution box of dimensions 470x380x130mm dedicated for installation of 48-72 fiber optic connectors. Standard outfit:

• one organizer tray KSP24 (max 3 organizer tray); • sliding support for six modules PS-010 (48-72

optical ports); • two cable glands sets – D1 and D3 • cables and bundles fastening and storing

components; • self-sticking labels for cables and fibers ( OSN and

OSK) • components for wall mounting

Ordering example

PSN16/36SF-3/2S24-YNN Distribution box, IP66 with pressure control valve – for outdoor applications, swinging support with three PS-010 modules for 12SC-E2 Small Flange adapters, three KSP24/2S24 organizer trays for 48 splices, D1 and D2 cable glands, self-sticking labels for cables and fibers OSN24, screws for wall mounting Additional equipment: D1 and D2 cable glands, P1 and P2 cable feedthroughs, splice protection sleeves, adapters, pigtails and patch cords should be ordered according to customer’s needs.

48

www.optronik.com.pl


Technical data – PSN 8

Technical data – PSN16

49

www.optronik.com.pl


Technical data – PSN32

Additional equipment for PSN boxes Cable gland module D1, D2

Cable gland modules are installed in side opening covers:

• D1 – small cover with three GPA16 glands; • D2 – small cover with two GPA16 glands and

one GPA21 gland; • D3 – large cover with two GPA16 and two

GPA21 glands; • protection rating: IP66

Cable feedthroughs P1, P2

IP20 rated feedthroughs with foam gasket PE screw fixed replacing gland covers:

• P1 – small feedthrough; • P2 – large feedthrough; • make color: grey RAL 7035 • protection rating IP41

50

www.optronik.com.pl


DISTRIBUTION CABINETS FOR FTTX

DISTRIBUTION CABINETS MST6 AND MSP6 Universal cabinets for indoor and outdoor applications in FTTX fiber optic networks, and in industrial, corporate or public networks (i.e. copper or fiber based CCTV monitoring) The cabinet’s protection level is rated IP66, mechanical resistance IK-10, flammability UL94-V0. Cabinets also complies with 2002/95/WE (RoHS). MSP6 type cabinets sized 400x600x230 mm are made of reinforced polyester, color grey RAL 9002. MST6 types are sized 400x600x250 mm made of powder painted steel, color grey RAL 7035. The cabinets have ATEX Ex safety certificate for use in potentially explosive atmospheres. The cabinets come with door on hinges, locks and wall mounting elements. Cabinets can also be equipped in P1 type cable glands on top or bottom side. IP66 rated cabinets for outdoor applications have a special pressure valve to prevent water condensing. Cabinet makes can be adjusted to meet individual customer needs.

51

www.optronik.com.pl


MSP6.1/X MST6.1/X

Fiber optic distribution cabinets are equipped with lifting support for KSP12 splice trays (max 6 pcs. for 144 splices), one sliding distribution frame (ODF) module for 96 standard adapters or 144 SC-E2000 Small Flange adapters and also a support for box type, connectorized splitter installation (max 4 splitters 2x32) or other passive/active devices according to customer’s needs. Splitters’ output ports’ pigtails are connected directly in ODF. MSP6.2/X MST6.2/X Fiber optic distribution cabinets are equipped with two symmetrically placed modules for KSP12 splice trays (total max 8 pcs for 192 splices), one sliding ODF module for 64 standard adapters or 96 SC-E2000 Small Flange adapters and also a support for box type, connectorized splitter installation (max 4 splitters 2x32) or other passive/active devices according to customer’s needs. Splitters’ output ports’ pigtails are connected directly in ODF.

Application range

All MSP6 and MST6 makes are designed for indoor applications (cat. C according to PN-EN 61753-1). Special MSP6 and MST6 makes rated IP66 with pressure control valve are designed for outdoor applications (cat. G according to PN-EN 61753-1. Marking

Ordering example

MSP6/96SC-4/S24-YYY Outdoor distribution cabinet made of polyester, rated IP66, four cable glands, ODF module for 96 SC-E2 standard adapters, four KSP12/S24 splice trays for 96 splices, self-sticking labels for cables and fibers OSN96, screws for wall mounting.

Technical data

Make variant Housing material Dimensions,

mm W x H x D

Weight, kg

Optical ports number*, max

Number of KSP12 trays /

number of splices, max MSP 6.1/X polyester 400x600x230 12 96SC(144SF) 6/144 MST6.1/X painted steel 400x600x250 19 96SC(144SF) 6/144 MSP6.2/X polyester 400x600x230 13 64SC(96SF) 8/192 MST6.2/X painted steel 400x600x230 20 64SC(96SF) 8/192

(*) – number of optical ports for application of: SC adapters with protective flap and E-2000 (SC) – flange type or flapless SC adapters and E2000 – small flange (SF) type.

52

www.optronik.com.pl


Technical data – MST6

53

www.optronik.com.pl


MSP6.3/X MST6.3/X

Distribution cabinets dedicated for FTTH. Cabinets are equipped with a lifting module for KSP12 splice trays (max 6 pcs. for 144 splices), sliding distribution frame (ODF) module (max 96 standard adapters or 144 SC-E2000 Small Flange adapters) and a splitter distribution frame module for two connectorized box type splitters (64 ports SC-E2 type). Splitters’ output ports are cross-connected with any port on ODF using short patch cords, without need of splitter cabling rearrangement. Splitters’ input ports are spliced with fiber optic line by fused or mechanical splices or switchable with connectors using ODF. Cabinets can also be equipped in P1 type cable glands on top or bottom side.

Application range

All MSP6 and MST6 makes are designed for indoor applications (cat. C according to PN-EN 61753-1). Special MSP6 and MST6 makes rated IP66 with pressure control valve are designed for outdoor applications (cat. G according to PN-EN 61753-1. Marking

Ordering example

MSP6.3/64SC-4/S24-YYY Outdoor distribution cabinet made of polyester, rated IP66, splitter distribution frame for 64 SC-E2A adapters, ODF module for 96 SC-E2 standard adapters, four KSP12/S24 splice trays for 96 splices, four cable glands, self-sticking labels for cables and fibers OSN96, screws for wall mounting.

Technical data

Make variant Housing material

Dimensions, mm

W x H x D

Weight, kg

Optical ports number*, max

Splitter’s optical ports number*,

max

Number of KSP12 trays/ number of splices, max

MSP 6.3 /X polyester 400x600x230 13 96SC(144SF) 64SC(64SF) 6/144 (*) – number of optical ports for application of: SC adapters with protective flap and E-2000 (SC) – flange type or flapless SC adapters and E2000 – small flange (SF) type.

54

www.optronik.com.pl



55

www.optronik.com.pl


PATCH PANELS 19” AND 21” OPD Patch panels for installation in 19” or 21” racks and cabinets. Patch panel consists of bearing frame with removable cover and of swinging drawer with splice trays and front panels for connector installation. Swinging drawers provide easy access to splice trays and optical connectors during service works due to optimal spare cable and fiber lengths management. Universal patch panels OPDU are adapted for easy latch installation of PS-010 connector modules on the front panel, which enables flexible configuration of optical connectors. Available are modules: 8FC-ST, 8SC-E2, 12SF (Small Flange) and dummy modules. OPDP type patch panels feature reduced installation depth and interchangeable mounting holders 19” and 21” with adjustable positioning. The OPD panels family is a whole range of 1U, 2U and 3U patch panels with various optical ports number along with additional equipment for cable management and communication within the rack or cabinet: cable dividers, spare lengths management panels, labeling panels, cable holder modules, etc. Application range

The OPD patch panels are designed for indoor applications (cat. C according to PN-EN 61753-1) – station objests, containers, cabling rooms etc. OPD patch panels have approval of MŁ and comply with TP S.A. industrial standard ZN-96/TP S.A.-009 Marking

Ordering example

OPDP21/1U-24SC-1/S24-NYP Patch panel with reduced installation depth 200mm 1U with mounting holders 21”, universal front panel for 24 SC-E2000 adapters, patch cord tray, one KSP12/S24 splice tray, self-sticking labels for cables and fibers, mounting screws/elements, color grey RAL 7035.

56

www.optronik.com.pl


UNIVERSAL 19” PATCH PANELS OPDU OPDU/1U

• panels 19”/1U with universal front board for installation of three modules PS-010;

• installation depth 300 mm; • organizer tray KSP12 or KSP24 according to

order; • standard outfit comprises self-sticking labels

for fibers and cables and assembly components.

Panels are available in color grey RAL7032. OPDU/2U

• panels 19”/2U with universal front board for installation of six modules PS-010;

• installation depth 300 mm; • two organizer trays KSP12 or KSP24

according to order; • standard outfit comprises self-sticking labels


Panels are available in color grey RAL7032. OPDU/3U

• panels 19”/3U with universal front board for installation of twelve PS-010 modules;

• installation depth 300 mm; • max three organizer trays KSP24 according

to order; • standard outfit comprises self-sticking labels


Panels are available in color grey RAL7032. PZS/1U

• spare lengths tray for station cables with a drawer.

• installation depth 300mm; • front panel with optional patch cord holding

rack. Panels are available in color grey RAL7032.

PZS/2U

• spare cable lengths tray for station cables with a drawer;

• installation depth 300mm; • front panel with a patch cord rack;

Panels are available in color grey RAL7032.

57

www.optronik.com.pl


PATCH PANELS 19” AND 21” WITH REDUCED INSTALLATION DEPTH OPDP OPDP/1U

• patch panel for 24-36 optical ports; • installation depth 200mm; • interchangeable mounting holders 19 and 21”; • adjustable position of mounting holders; • front boards with 24 holes FC-ST type or up to

36 SC-E2 type, • optional patented lock (for SC-E2A type); • optional universal front panel with 3 PS-010

modules and patch cord rack – no lock) • one organizer tray KSP12 or KSP24

according to order; • standard outfit comprises self-sticking labels

for fibers/cables and assembly components. Panels are available in color grey RAL7032. OPDP/2U

• patch panel for 36-48 optical ports; • installation depth 200mm; • interchangeable mounting holders 19 and 21”; • adjustable position of mounting holders; • universal front panel for 6 modules PS-010,

with optional patch cord rack; • one KSP24 splice tray; • standard outfit comprises self-sticking labels

for fibers/cables and assembly components. Panels are available in color grey RAL7032. PZPS/1U

• spare cable lengths tray for station cables with a drawer;

• installation depth 200mm; • interchangeable mounting holders 19 and 21”; • adjustable position of mounting holders; • front panel with optional patch cord rack; • OPDP compatible.

Panels are available in color grey RAL7032.

58

www.optronik.com.pl


MODULAR PATCH PANELS 19” OPDM OPDM/3U

• panel 3U is a chassis for installation of large optical nodes in 19 inch cabinets;

• enables installation of up to 14 modules M/3U type with 12 optical adapters each or passive devices with up to 12 ports;

• possible installation of only PS-010 modules (i.e. for pre-terminated break-out cables);

• color grey RAL7032.

M/3U module

• modules for chassis OPDM/3U for installation with screws on the front side;

• module has holders for fixing transport tubes with buffered fibers or station cables, a spare fiber lengths organizer (for buffered fiber 0,9 mm) and also an interchangeable holder for splices or passive devices;

• module for 8 FC/ST adapters – M/3U/8FC; • module for 8 SC/E2000 adapters –

M/3U/8SC; • module for 12 SC/E2000 Small Flange

adapters – M/3U/12SF; • standard outfit comprises self-sticking labels

for fibers/cables OSN12 and assembly components;


59

www.optronik.com.pl


PATCH PANEL EQUIPMENT

Front panel 19”/1U

• LU/1U – panel with CHM cable holders for horizontal station cable communication;

• LO/1U – panel with a translucent tray for insertion of a description label;


Cable divider RK12, RK24

Dividers are designed for outdoor cable fastening and dividing of fibers into bundles protected by transport tubes (RK12 and RK24 for 12 or 24 tubes respectively). Dividers utilize corrugated Miniflex tubes Ø5/3 mm providing mechanical protection and maintaining safe bound radius. Transport tubes are to be ordered separately according to customer’s needs. Divider’s construction provides outdoor cable grounding if required. Installation panel LRK

Panel 19”/1U with holes for installation of up to eight RK dividers in a rack or cabinet. Mounting screws included. Color RAL 7032.

60

www.optronik.com.pl


SPLICE TRAYS KSP12, KSP24

KSP type splice trays’ size is adapted for storing and arrangement of ribbon fiber splices, mechanical splices and passive devices up to 60 mm length, maintaining bound radius over 30 mm. Interchangeable splice holders enable application of various heat-shrinkable protective sleeves, mechanical splices and passive elements of various dimensions. Installation of other supplier’s holders (3M, Corning) is also possible. Modular extension of splice trays set is simple due to the latch hinges installed on each tray. Splice tray’s body and splice holders are made of polycarbonate (PC), hinges made of polyamide (PA), covers of pressed PVC.

Application range Splice trays are designed for installation in closures, distribution boxes and patch panels within temperature range from -40 to +70°C.

KSP 12

• dimensions: 186x136x13 mm; • installation of 1-2 holders: S24 for fused splices,

S12 and M10 for fused splices, passive devices or mechanical splices 4x4mm, F6 for Fibrlok type mechanical splices;

• recommended installation density: 24 fibers or six 12-fiber ribbons;

• latch hinges, PVC cover and cable ties included. KSP 24

• dimensions: 300x136x13 mm; • installation of 2-4 holders: S24 for fused splices,

S12 and M10 for fused splices, passive devices or mechanical splices 4x4mm, F6 for Fibrlok type mechanical splices;

• recommended installation density: 48 fibers or twelve 12-fiber ribbons;

• latch hinges, PVC cover and cable ties included. Interchangeable splice and passive device holders

• S12 – 12 splice sleeves and passive devices Ø2,4-3 mm;

• M10 – 10 mechanical splices and passive devices of dimensions 4x4 mm (±0,2mm);

• S24 – 24 splice sleeves Ø2,4mm ±0,2mm, two layers in flexible comb;

• latched covers; • full compatibility.

61

www.optronik.com.pl


Ordering example

KSP12/S24 Organizer tray KSP12 with one S24 module, latch hinges, cover and cable ties included. KSP24/S24/F6 Organizer tray KSP24 with one S24 module and one F6 module, latch hinges, cover and cable ties included.

Technical data KSP 12

Technical data KSP 24

62

www.optronik.com.pl


CLOSURES AND BOXES EQUIPMENT Fused splice protective sleeves SP Heat-shrinkable sleeves for protection of fused splices. Applicable for primary fiber 0.25 mm and buffered fiber 0.9 mm as well as their combinations. Shrinks in all models of built-in splicer’s shrink ovens and in hot air from a heater gun in temperature of 120OC. After shrinkage the sleeves are fully airtight and provide good mechanical protection of the splice. The range of available products comprises splice sleeves of diameter (after shrinkage) 2,4 or 3 mm and length 60 or 45 mm.

Mechanical fiber optic splices

Fibrlok™ – 3M mechanical splices: • Fibrlok™ II 2529 • interconnection of SM and MM fibers 0.25 mm

and 0.9 mm; • 6-splice holders for splice trays and

organizers

CamSplice – Corning mechanical splices: • CamSplice 95-000-04 • CamSplice 95-000-04-ATC (Anti Torsion

Crimp) • interconnection of SM and MM fibers 0.25 mm

and 0.9 mm; • 5-splice holders for splice trays and

organizers

Application range Fused splices protective sleeves are designed for use in dome closures and distribution boxes within temperature range from –40 to +70°C. The SP sleeves were tested on conformity with Ministry of Telecommunications requirements and TP S.A. industrial standard number ZN-96/TPSA-009 (applied with OZKS160 closures). Ordering example

SP60/24 Heat-shrinkable protective sleeve for fused splices, length 60 mm, diameter (after shrinkage) 2.4 mm.

63

www.optronik.com.pl


Cable holders CHM

Holders (collars) for cable bundles. Material: polyamide, bore dimensions 34x20 mm. Mounted with single screw or rivet using positioning pin, alternatively with self-adhesive Velcro tape. Color RAL7035 Cable holders CHD

Holders (collars) for cable bundles in distribution boxes and cabinets. Material: polyamide, bore dimensions: 80x20 mm. Mounted with single screw (included). Color RAL7035.

Velcro tapes RKW

Velcro tapes for fastening cable bundles and other elements in closures, boxes or cabinets.

• RKWRA-20-BK width: 20 mm, sold in running meters;

• RKWA-9 dimensions: 90x10 mm, formed in threading eyelet – packed by 100 pcs.

Cable glands GPA

Cable glands made of polyamide for individual installation:

• GPA M16 – bore diameter 5-10 mm, installation in M16 hole or with a counter-screw;

• GPA16 – bore diameter 10-14 mm, installation with a counter-screw (optional cable grip);

• GPA21 – bore diameter 13-18 mm, installation with a counter-screw (optional cable grip);

Cable ties TK

Ties for cable fastening, material: polyamide (black), length L: from 90 to 300 mm – packed by 100 pcs.

Adapter installationmodules PS-010

Universal panel modules made of polycarbonate for installation of optical adapters in distribution boxes and cabinets PSS, PSN, MSP and OPDU panels. Available makes:

• PS010/ 8FC-ST, • PS010/ 8SC-E2, • PS010/ 12SF (SC-E2 Small Flange); • PS010/CSDX (SC Duplex); • PS010/Z (dummy).

The PS-010 modules are mounted with latches and enable flexible configuration of optical ports in distributors. LGX Lucent compatible. Available colors: grey RAL7032 and on demand RAL7035

64

www.optronik.com.pl


LABELS FOR FIBERS AND CABLES OSN

Self-sticking labels on a vinyl film with a thermal print. Designed for optical fibers, buffer tubes and cables with diameter up to 3 mm.

• dimensions 20x10 mm; • in sheets of 24 pcs. each with double

numeration: 1-12; 13-24; 25-36; 37-48 etc.; • sheets with custom print available for quantity

>1000 labels.

ONL

Clamp cable markers for buffer tubes and cables with diameter from 1.5 to 3.4 mm.

• numerical markers 0-9; • alphabetic markers A-Z; • markers come on applicators by 30 pcs of

same type.

OSL1

Self-sticking warning labels on yellow vinyl film. • dimensions 40x20 mm; • black print „UWAGA LASER”.

OSL2

Self-sticking warning labels on yellow vinyl film. • dimensions 60x30 mm; • black print „UWAGA – NIEWIDZIALNE

PROMIENIOWANIE LASEROWE”.

OSK

Self-sticking warning labels on yellow vinyl film. • dimensions 110x55 mm; • black print „UWAGA – KABEL

ŚWIATŁOWODOWY”; • blank field for description (use permanent

marker).

65

www.optronik.com.pl


CABLE SPARE LENGTHS MANAGEMENT EQUIPMENT

SPARE LENGTH FRAMES AND BOXES Frames and boxes for managing and protection of cable spare lengths in lodgings, cable chambers and on aerial line poles.

SZK

• SZK300 – adjustable frame (in range of 250-350 mm), can be adjusted for best fit to spare cable bending radius and length. With optional installation kit for cable racks and cabinets.

• SZK600 – adjustable frame (in range of 500-700 mm) can be adjusted for best fit to manhole size, spare cable bending radius and length.

• SZK900 – adjustable frame (in range of 800-1000 mm), dedicated for large diameter (>16 mm) optical cable storage;

• SZKn – optional outfit for installation on aerial line poles;

• made of bent and welded steel elements, zinc plated

PZK

• covers for SZK600 frames; • PZK 600 dimensions: 610x610x105 mm; • PZK 700 dimensions: 710x710x105 mm; • made of steel plates covered with protective

electrochemical coating and powder painted, color RAL 7032.

SZK/PZK • SZK/PZK600 – box, dimensions: 610x610x105 mm; • SZK/PZK700 – box, dimensions: 710x710x105 mm;

SZKO600

• full frame, dimensions: 600x600x100 mm with a PZK600 cover;

• industrial padlock bolt as an option; • made of steel plates covered with protective

electrochemical coating and powder painted, color RAL 7032.

Ordering example SZK600 Universal frame for wall mounting. SZKO600K Full frame with PZK 600 cover with industrial padlock bolt.

66

www.optronik.com.pl


PROTECTIVE TUBES

Reinforced tubes S661

• Flexible PVC tubes, with spiral reinforcement; • type, by internal diameter: S661/16mm,

S661/18mm; • high mechanical durability; • very high resistance to extreme environment

conditions, oils, lubricants or solvents; • recommended for applications in cable shafts, hard

industrial conditions and in the ground directly. Twofold corrugated tubes CoFlex

• Low smoke, zero halogen tubes (LSZH); • internal diameter range: 10-50 mm; • enables installation on cables without threading; • recommended for indoor applications for cable

bundles protection.

Corrugated tubes Ingremio

• Low smoke, zero halogen tubes (LSZH); • internal diameter range: 10-50 mm; • optional pilot wire for Ø>14 mm tubes; • recommended for indoor applications for cable

bundles protection.

67

www.optronik.com.pl


BURIED CABLE CONTAINERS HDPE The container incorporates a polyethylene body and a cover with support tube which directly carries vertical tension. The body shape provides proper anchoring in the ground. ZZ-PE container make is designed only for cable spare lengths storage. Other makes have a pouch for dome closures installation. The container can usually store from 50 m of Ø16 mm cable to 100 m of Ø12 mm cable. The corners in lower part of the body are formed to enable installation of tight glands for insertion of protective secondary tubes with diameters of 32 mm and 40 mm (three in each corner). Glands can be installed individually by fitter or at make if required. Standard equipment includes cover sealing kit.

Main features

• low weight – no need for using heavy equipment for transport and installation; • superior leak tightness, including cable and tube insertion points; • fast and easy installation in extreme environmental conditions: high ground water level, rain,

low temperature; • stiff body provides good durability and excellent resistance to corrosion, chemicals or low temperature; • 100% recyclable, environment friendly product.

Technical data

Material: polyethylene HDPE Weight: body ZZ-PE – 14 kg;

body ZZ-PE-1 – 17 kg; body ZZ-PE-2 – 20 kg; cover – 6,5 kg.

Operating chamber dimensions: diameter – 780 mm, height – 330 mm Inner dimensions of closure holding pouch: diameter – 220 mm, length – 350 mm Manhole entrance diameter: 600 mm Number of corners for tube insertion: ZZ-PE – 4; ZZ-PE-1 – 3; ZZ-PE-2 – 2.

ZZ-PE-1

Container for spare cable lengths storage and one dome closure.

ZZ-PE-2

Container for spare cable lengths storage and two dome closures.

ZZ-PE

Container for spare cable lengths storage without pouch.

Catalogue of optical equipment

Documents