684 Information Quality for the lifetime of the furniture Over the course of time, this has allowed us to tailor new products to the requirements of the market. To reach our objective we are monitoring our products in real working environments as well as in testing labs. Test results are incorporated into the manufacture and development of our products. Our goal is to ensure that furniture buyers can enjoy the convenience and perfect function of our fittings for the lifetime of their furniture. General Information Catalogue 2013/2014 Box and runner systems Lift systems Hinge systems
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
684
Information
Quality for the lifetime of the furniture
Over the course of time, this has allowed us to tailor new products to the requirements of the market.
To reach our objective we are monitoring our products in real working environments as well as in testing labs. Test results are incorporated into the manufacture and development of our products.
Our goal is to ensure that furniture buyers can enjoy the convenience and perfect function of our fittings for the lifetime of their furniture.
General Information
Catalogue 2013/2014
Box and runner systemsLift systems Hinge systems
685
Information
Overview
General Information▶▶▶ Information 686▶▶Safety information 687▶▶Testing standards at Blum 688▶▶Blum’s subsidiaries, representatives and contacts 706▶▶Glossary 712▶▶Part No. Index 720
Information about lift systems▶▶▶Reference values for door weights 690
Information about hinge systems▶▶▶Planning 692▶▶Fixing 693▶▶Angled hinges 694▶▶Dimensions 695▶▶Front overlay 696▶▶Motion processes and closing action 697
Information about Box and runner systems▶▶▶Overview 698▶▶Dimensions 699▶▶Tolerance compensation 700▶▶Planning 701▶▶ Inner dimensions for cutlery inserts 702▶▶SERVO-DRIVE uno – country list 704
PictographGeneral Information
Overlay application
Dual application
Inset application
Angled application inset
Angled application half overlay
Angled application overlay
Angled application max. overlay
Angled application mitered
Info
rmat
ion
Symbol image
Symbol image
Symbol image
Symbol image
Catalogue 2013/2014
686
Information
General Information▶Information▶▶
Info
rmat
ion
Catalogue 2013/2014
General assembly, application and user instructionsAll Blum products undergo strict quality control procedures through all stages of production. All Blum fittings are designed for furniture and fur-niture components made from wood, chipboard or MDF. Careful attention must be paid to fitting or operating instructions when using Blum prod-ucts (see catalogues and operating manuals for all technical information).
The manufacturer must decide on the screws or fixing methods to suit the material being used (i.e. wood, chipboard, etc.). The fixing recom-mendations refer to the screwing in of fittings to epoxy coated chipboard according to chipboard standard EN 312, requirements according to classification type P2, with a gross density of 650 kg/m³ according to EN 323.Test requirements refer to the fixing recommen-dations according to catalogue information.The fittings must not be exposed to acidic or corrosive materials (i.e. some household clean-ing solutions). To ensure that Blum products function correctly, they must be kept clean and undamaged.
General conditions of sale and deliveryAll deliveries and services are based on the “general conditions of sale” which are available upon request.
The technical presentations and dimensions in illustrations and drawings are non-binding. We reserve the right to make changes to specifica-tions at any time.
We do not accept any responsibility for any er-rors which may occur in the production of this catalogue.
Our load limits relate to standard applications in kitchen construction. When used for special applications, e.g. with very heavy or high fronts, very short nominal lengths, very wide elements or very long nominal lengths, it is necessary to reduce the total carrying capacity accordingly.
The Blum sales team will be happy to provide further information or instructions if required. Anyone selling Blum fittings must ensure that their customer is aware of any relevant informa-tion given in this catalogue.
687
Information
General Information ▶Safety information ▶▶
Page instructionsCLIP top 155° hinge 110
We provide the relevant safety accessories for the following products
Catalogue 2013/2014
All other running systems do not come with safety accessories and are, therefore, unsuitable for use with potentially dangerous items.
Attention!Wide angle hinges – safety informationIf standard wide angle hinges are used in furni-ture that can be accessed or reached by small children, then it should be noted that it is possi-ble for small fingers to get in-between the work-ing mechanism of the hinge. In these cases all relevant doors should be fitted with child safety latches. Alternatively, manufacturers should use our specially-designed 155° wide angle safety hinge 71T7xx0N.
Manufacturers must ensure that the end user is aware of this.
Pull-outs with dangerous contentsBlum drawer systems are designed for domestic and contract use. If the drawer or pull-out is used to carry potentially dangerous items (e.g. sharp knives, domestic electrical appliances with sharp edges), then it is recommended that they are fitted with pull-out stops or pull-out locks and child safety latches. This is especially important when contents may pose a risk of injury (e.g. electrical appliances such as bread slicing ma-chines, knives or other items with sharp edges).
Machine SafetyBlum assembly devices and machines are de-signed, constructed and tested according to the latest international safety standards. Extra attention is also paid to operator safety in this regard. A comprehensive operations manual is supplied with each device and incorporates extensive instructions on installation and use. It is absolutely necessary that all operators read and adhere to the instructions therein. Under no circumstances should changes be made to any safety feature.
Machine DirectiveFurniture equipped with SERVO-DRIVE for AVENTOS is only covered when used for commercial purposes by machine directive 2006/42/EC. This is valid for putting a machine on the market within the Euro. Economic Area (EEA), Switzerland and Turkey. This results in requirements that you as furniture manufacture must take into account. The standards and/or guidelines of other countries are met by TÜV certification. For more information, please go to www.blum.com.
TANDEMBOX plus BLUMOTION
MOVENTO 760H/766H
METABOX 320
TANDEM 550H/560H/566H
TANDEM 551H/561H
STANDARD 430E
All systems
Integrated pull-out stop
Separate pull-out lock, part no. 320M0009 additional tilt device for central lockingPull-out lock integrated into locking device
Pull-out lock integrated into locking device
Integrated pull-out stop
Integrated pull-out stop
Child safety latch 295.5500
Info
rmat
ion
688
Information
General Information▶Testing standards at Blum▶▶
Lift systems
Lift systems Hinge systems
Hinge systems
Catalogue 2013/2014
Durability80.000 opening and closing move-ments
Durability200.000 opening and closing move-ments
Durability with 5 kg additional loadFor determining limit values for the fitting
Corrosion testBased on DIN EN ISO 9227 and DIN EN ISO 6270-2 for simulating corrosion influences
Corrosion testBased on DIN EN ISO 9227 and DIN EN ISO 6270-2 for simulating corrosion influences
Static load testFor simulating unintended overload when using fronts with handles
Static load test45°opening angle to simulate a load on the front in the lower base cabinet
Dynamic load testWith an additional vertical load of 20 kg for simulating an unintended load
Test frontWeight approx. 6.5 kg
Info
rmat
ion
Lateral load testFor ascertaining effect of side load
Slam open/slam shut testFor simulating overload when open-ing and closing and for preventing the fronts from coming off
Abuse testHorizontal load test for securing unintended overload
689
Information
General Information ▶Testing standards at Blum ▶▶
Box and runner systems
Box and runner systems
Box and runner systems
Wall hanging bracketDetailed testing standards and limiting values are defined in our internal guidelines
Load test according to DIN ISO EN 15939 (test frame A)- 260 kg per pair of wall hanging brackets
- Duration of test: 8 days- Catalogue specification: permis-sible total load 130 kg
Catalogue 2013/2014
Durability100.000 opening and closing move-ments
Durability100.000 opening and closing move-ments
Corrosion testBased on DIN EN ISO 9227 and DIN EN ISO 6270-2 for simulating corrosion influences
Static load testCompletely open with additional load to simulate a load on the front
Static load testCompletely open with additional load to simulate a load on the front
Info
rmat
ion
Lateral load testFor ascertaining effect of side load
Lateral load testFor ascertaining effect of side load
Slam open/slam shut testFor simulating overload when open-ing and closing and for preventing the fronts from coming off
Slam open/slam shut testFor simulating overload when open-ing and closing and for preventing the fronts from coming off
690
Information
Information about lift systems▶Reference values for door weights▶▶
E.g. 30° II30° Cabinet angleII Cranking overlay application
Cranking:I Half overlay applicationII Overlay applicationIII Full overlay application
Outer edge of door and outer edge of cabinet are in a line
How to achieve the relevant application:- Angled hinges- Mounting plate height- Mounting plate fixing- Angled spacers- Hinge adjustment
Inner and outer edges of door and cabinet are flush
Inner edge of door and inner edge of cabinet are flush
Outer edge of door and inner edge of cabinet are flush
Dependent on hinge design
The nominal opening angle can be de-creased slightly through:- Small gap between doors- Thick doors- Large drilling distance- Side adjustment being used to reduce the door overlay
KS Cabinet angle = application e.g. 45°OW Opening angle e.g. 95°
K with +5°/-5° angled spacer
Applications from -50° to +50° are feasibleE.g. 20° hinge
Catalogue 2013/2014
SH
SL
FE
695
Information
Information about hinge systems ▶Dimensions ▶▶
Hinge dimensionsOverlay applicationStraight hinge arm
Dual applicationCranked hinge arm – 9.5 mm
Inset applicationDouble cranked arm – 18 mm
Installation dimensionsOverlay applicationStraight hinge arm
Dual applicationCranked hinge arm – 9.5 mm
Inset applicationDouble cranked arm – 18 mm
Hinge boss dimensions and drilling patternsScrew-on INSERTA/knock-in Hinge boss dimensions
Info
rmat
ion
SH Hinge arm heightSL Hinge arm lengthFE Door protrusion
TS Front gapTB Drilling distanceTO Boss overlay (fixed dimension)FA Front overlayF Gap
SH Hinge arm heightSL Hinge arm lengthFE Door protrusion
TB Drilling distanceTO Boss overlay (fixed dimension)F Gap
SH Hinge arm heightSL Hinge arm lengthFE Door protrusion
TS Front gapTB Drilling distanceTO Boss overlay (fixed dimension)FA Front overlayF Gap
FLB Flange widthFLH Flange heightPB Space requirement
BT Drilling depthTB Drilling distanceDT Diameter of hinge boss drilling
BT Drilling depthTB Drilling distanceDT Diameter of hinge boss drilling
Catalogue 2013/2014
MF
696
Information
Information about hinge systems▶Front overlay▶▶
How to alter the front overlay
Factory setting/zero protrusion for overlay application
Minimum gap
The minimum gap is based on doors with 1 mm radiused edges. With more pronounced radiuses the gaps can be reduced
Side adjustmentHinge cranking Use spaced mounting plate Alter drilling distance
Catalogue 2013/2014
Boss overlay TO (fixed dimension)
100° - 170°Mini/glass door110°/120° specialProfile/thick door
11.0 mm10.0 mm13.0 mm11.0 mm
100°Refrigerator door
11.0 mm11.0 mm
± 0.5 mm
ToleranceMODUL
Adjustment area (gap)
100° - 170°Mini/glass doorProfile/thick door
± 2.0 mm+0.5 / -3.5 mm± 2.0 mm
100°Refrigerator door
± 2.0 mm± 2.0 mm
Front gap TS CLIP topCLIP
1.5 mm1.2 mm
Adjustment area (depth)
CLIP topCLIPMini/glass door
-2 / +3 mm-1 / +3 mm± 2.0 mm
100°Refrigerator door
± 2.0 mm± 2.0 mm
–
± 0.4 mm
± 0.5 mm
CLIP top/CLIP
Info
rmat
ion
MF Minimum gap Required to open door
TS Front gapTO Boss overlay (fixed dimen-
sion)
10°
30° 30°
20°
697
Information
Information about hinge systems ▶Motion processes and closing action ▶▶
110°-hinge 107°-hinge 100°-hinge 155°-hinge
170°-hinge Profile/thick door hinge Glass door hinge Mini-hinge
Corner cabinet bi-fold hinge Note
Catalogue 2013/2014
Info
rmat
ion
The maximum opening angle can be limited depending on the door shape, door thickness and hinge setting
698
Information
Information about Box and runner systems▶Overview▶▶
Wooden drawer Metal drawer side drawer
STANDARD 230 METABOX 320
STANDARD 430 METABOX 330
TANDEM 550H/551H
MOVENTO 760H/766H, TANDEM 560H/566H/561H TANDEMBOX 558/559/556
Info
rmat
ion
Catalogue 2013/2014
VisibleSingle extension
VisibleFull extension
ConcealedSingle extension
ConcealedFull extension
BO
BO
BT
699
Information
Information about Box and runner systems ▶Dimensions ▶▶
Space requirement in cabinet
Cabinet dimensions
Front overlay/min. gap Drilling pattern front fixing brackets
Catalogue 2013/2014
Info
rmat
ion
BT Drilling depthBO Drilling distance
MF Minimum gapFA Front overlay
LW Inner cabinet widthLT Internal cabinet depth
EA Insertion/removal space requirementEB Mounting widthMAu Min. distance bottom
H Drawer side heightEB Mounting widthMAo Min. distance topMAu Min. distance bottom
1.5 1
1.5 1
700
Information
Information about Box and runner systems▶Tolerance compensation▶▶
TANDEMBOX
METABOX
MOVENTO/TANDEM
STANDARD
Info
rmat
ion
Catalogue 2013/2014
Built-in tolerance compensation ± 1.5 mm
Left tolerance compensation + 1.5 / - 1 mm
Left tolerance compensation + 1.5 / - 1 mm
Tolerance compensation (drawer width)
Right guided
Right guided
Right guided
up to max. 16.0 mm Side panel thick-ness: + 1.5/- 0 mm*
* MOVENTO: Limited side adjustment for a drawer side panel thickness of 16 mm, but with full tolerance utilisation of the internal drawer width SKW!
701
Information
Information about Box and runner systems ▶Planning ▶▶
Stop design and screw head protection for roller runners
Loss of extensionFull extension Single extension
Over extension
Standard pull-out stop at first indentation Lock open position (e.g. for cleaning of drawer), roller locates between 1st and 2nd indentation
Spacing beads prevent rollers from fouling protruding screw heads
Catalogue 2013/2014
Info
rmat
ion
TA Actual loss of extensionAF Loss of extension of runner system
UF Over extension of runner systemTU Actual over extension
42
A
BB
LW
BH
702
Information
Information about Box and runner systems▶Inner dimensions for cutlery inserts▶▶
TANDEMBOX plus
Height of Drawer Side N Height of Drawer Side M Height of Drawer Side K
Info
rmat
ion
Catalogue 2013/2014
The curved design of drawer sides of TANDEMBOX must be taken into account when calculating the width of the cutlery insert.The cutlery insert width required is dependant upon the cutlery insert height.
Cutting dimensions for cuttlery insertHeight BH as desiredLength = nominal length of drawer side - 26 mmWidth BB = internal width LW - 2 x A
Sri Lanka*Sudan*U.A.E.*UgandaUnited KingdomVietnam*Yemen*ZambiaZimbabwe*Z10T__3Wxy
Z10NA20xy01
B Country
AustraliaFijiNew ZealandPapua New Guinea
Z10T__3WxyZ10NA20xy01
K Country
AfghanistanAlbaniaAlgeriaAngolaArmeniaAustriaAzerbaijanBangladeshBarbados*BelarusBelgiumBeninBolivia*Bosnia and HerzegovinaBrazilBulgariaBurundiCameroonCanary IslandsCentral African RepublicChile
CroatiaCzech RepublicDemocratic Republic of the CongoDenmarkEcuador*Egypt*EstoniaFaroe IslandsFinlandFranceFrench polynesia (Tahiti)*GabonGambiaGeorgiaGermanyGhana*Gibraltar*GreeceGreenlandGuadeloupeGuyana*
Blum Furniture Hardware (Shanghai) Co., Ltd., Nanjing BranchNanjing Unit A1, 3th. Floor, High and New Technique Industry ZoneFuhua Building, No.1 Guanghua Rd., Baixia District210014 Nanjing, China
Julius Blum GmbH Liaison Office IndiaOffice No. 3, Building “A”, BETA, I Think Techno CampusOff J.V.L.R, Opp Kanjurmarg StationKanjurmarg (E), Mumbai 400 042, India
General Information ▶Blum’s subsidiaries, representatives and contacts ▶▶
Catalogue 2013/2014
Info
rmat
ion
712
Information
General Information▶Glossary▶▶
Side, height and depth adjustment 200259
3-dimensional adjust-ment
3
Side, height and depth adjustment and tilt adjustment
4584-dimensional adjust-ment
4
Dimension from front of cabinet to the inside of the drawer back
701Actual loss of extensionA
For fixing BLUMOTION and/or TIP-ON for doors
192Adapter plate
Hinge for angled cabinet sides, e.g. display cabinets or corner units
136694
Angled hinge
Attachment brackets can be used when a single pull-out element is being operated or when the installation situation does not permit a continuous bracket profile
384392
Attachment bracket
Lift system fitting for bi-fold lift systems 28AVENTOS HF
Lift system for small stay lifts 78AVENTOS HK-S
Lift system fitting for stay lifts 64AVENTOS HK
Lift system fitting for lift ups 54AVENTOS HL
Lift system fitting for up & over lift systems
44AVENTOS HS
To avoid the collision of fronts, drive units (max. 6) are linked so that only one front can be opened at a time. A front is prevented from opening as long as a linked front remains open
30Avoiding collisions
Hinge for corner cabinet with bi-fold doors; used in combination with wide angle hinges
132Bi-fold hingeB
Sleeve for fixing to drill bit 670Bits
Hinges for blind corners 118208
Blind corner hinge
The ORGA-LINE film dispenser ensu-res crease-free removal of plastic film
593Blum dispenser rod
Distance bumper for SERVO-DRIVE – ensures the required trigger path to activate the drive unit
368371
Blum distance bumper
Drawer closes automatically over the last closing distance to prevent boun-cing out if slammed shut
476BLUMATIC self closing feature
BLUMOTION retrofit part for silent and effortless closing action for METABOX
416447
BLUMOTION-unit
The perfect motion, silent and effort-less, for lift systems, drawers, pull-outs and doors
182BLUMOTION
The transformer can be used world-wide. It converts the county-specific mains voltage to 24 V DC (direct current)
31369507
Blum transformer
Decorative cover cap designed to hide hinge boss fixing screws
181Boss cover cap
Steel panel for drawer side to suit TANDEMBOX intivo
222BOXCAP
Fixing brackets for design elements of TANDEMBOX intivo
222BOXCOVER
The drive units are attached to the bracket profile
368506
Bracket profile
For fixing the drive unit to the horizon-tal bracket profile
388522
Bracket profile adapter
For fixing the bracket profile in the cabinet
368506
Bracket profile attach-ment
Electrical cable in the bracket profile 398538
Bracket profile cable
Protection against contact for the open cable end at the cut edge of the bracket profile – this is used for a cabinet construction with a vertical cross member
368506
Bracket profile cover cap
Connector for cabinet parts (cabinet sides, top and base, and cross rail, etc.)
599Cabinet connectorsC
Part of the runner system that fixes to the cabinet side
548Cabinet profiles
Protection against contact – is inserted onto the open cable end
30368506
Cable end protector
For tool-free fixing of the electrical cable to the cabinet
31369507
Cable holder
The cam is used to adjust the height of mounting plates
Ruler stop with height adjustable zero position for special drilling functions e.g. angled work pieces
656Centre marking stop
Prevents accidental opening of doors and drawers
687Child safety latch
Screws for chipboard with correspon-ding thread
88252
Chipboard screws
Sleeve for fixing to drill bit to suit quick connect chucks
670Chuck sleeve for quick connect chuck
CLIP adapter plates are used with AVENTOS HF fittings in combination with narrow alu frames
34CLIP adapter plate
It is positioned between the upper and lower front of an AVENTOS bi-fold lift system
30CLIP top centre hinge
Drawer profile of opened drawer is hidden from view
698Concealed runner
This connecting node establishes the electrical connection between the dis-tribution cable and the bracket profile and/or transformer
30368506
Connecting node
To simplify cleaning of METABOX drawers
447Contoured profile
Decorative covers for hinges, lift system fittings or drawer systems can also be supplied printed with a customer’s brand name
30179228418
Cover caps
Cranking of hinge arm to achieve twin or inset application
695Cranking
See “CRISTALLO” furniture hinges for glass and mirror doors. Fixing using adhesive technology without door drilling
126CRISTALLO
Hinge for corner cabinets 45° 695Cross corner hinge
Connects the cross divider with BOXSIDE
570Cross divider connec-tor
Has an alu profile and can be cut to size using a circular saw
570Cross divider for cut-ting to size
Cross dividers using a gallery system 573575590
Cross gallery
Ensures sufficient stability when using AVENTOS HS and AVENTOS HL
4757
Cross stabiliser
Adjustment of a door’s position in relation to front face of cabinet
200Depth adjustmentD
For adjusting the front depth For adjusting the door gap
464Depth adjustment
Design element for TANDEMBOX intivo; for individual wishes – can be achieved in any material
248Design element
Cutting unit for plastic film or alu foil 593569589
Dispenser
This electrical cable is used to supply the power required by the cabinet elements and/or drive units. Max. permitted operating voltage: 24 V DC (direct current)
30368506
Distribution cable
Sloping of door’s inner or outer edge 696Door bevel
Distance by which door protrudes into the aperture of the cabinet during opening
103Door protrusion
Radius of door’s outer or inner edge 696Door radius
Mounting plate inserted by a machine or a knock-in tool. Cabinet side is pre-drilled
693Dowel plates
Drawer which comprises back, base and 2 sides
502Drawer (3-sided)
Drawer which comprises back, base, front and 2 sides
502Drawer (4-sided)
Part of the runner system that fixes to the pull-out element
548Drawer profile
Metal or wooden drawer side 320Drawer side
Makes it possible to have the same drilling pattern for work pieces of varying thickness
670Drilling depth spacer
Drilling depth for hinge boss, mounting plates or front fixing parts
695699
Drilling depth
Distance from outer edge of door to edge of drilled hole
695Drilling distance
Gearbox with several spindles. Availa-ble for various drilling patterns
654Drilling head
Drillings required to attach the hinge boss or front fixing brackets for pull-out/lift systems
695699
Drilling pattern
Information
General Information ▶Glossary ▶▶
Catalogue 2013/2014
Info
rmat
ion
714
Removable, easy-to-clean tray made from stainless steel
570572574
Drip tray
The drive unit opens the pull-out and/or lift system
30368506
Drive unit
Twin application where a mounting plate is fixed onto both sides of a single cabinet. Each door overlays half of the cabinet end
695Dual application
Total load bearing of runner (drawer, base, front weight plus load) for day-to-day use
689Dynamic load bearing
Optimised storage space and quality of motion. Initiative for a new kitchen standard
6DYNAMIC SPACE
Assembly with pre-mounted split do-wels and special screws, for assembly by hand
693EXPANDO assemblyE
Or zero position. Factory-set fittings, pre-set at defined door or front posi-tions
103696
Factory settingF
Adjustable machine section designed for ruler attachment
670Fencing system
Feature on CLIP top-centre hinge for AVENTOS – avoids injury to finger if trapped between fronts when closing
3034
Finger safety
Or boss overlay, is the distance the hinge boss overlays the cabinet side. This is correct for mounting plates with 0 mm spacing
695Fixed dimension
A electrical cable with a plug for the respective country must be used to connect to the local power grid
31369507
Flex
Door with frame construction, usually made from solid wood
130Frame door
Fixing component used to attach fronts to high fronted pull-outs
553Front bracket/front con-nector plate
Front fixing component used to attach the drawer front to the drawer and/or pull-out
320Front fixing bracket
Gap between door and cabinet front when door is closed, see TS dimen-sion
696Front gap TS
Distance that front overlays cabinet side and/or top or bottom base
699Front overlay
The front stabiliser strengthens the connection between the drawer side and front
353Front stabilisation
Pull-out element can be opened completely
320413473547701
Full extension
Gap between door and cabinet front when door is closed
695GapG
External decorative cap that connects glass door hinge and door
128Glass door decorative cover cap
The latch connects the inner drawer to the pull-out front and enables both to be opened simultaneously
228322
Handle and latchH
Hand held tool for assembly of knock-in fittings
633Hand insertion tool
Mounting plate with integral height adjustment, one-part over elongated hole, two part or cam
172Height adjustable mounting plate
Adjusts height position of front/door. Changes the gap between two doors or front overlay at the top and/or bottom
200361455502
Height adjustment
Pull-out with a high front – gallery surround possible
328High fronted pull-out
Decorative cover for hinge arm; can al-so be supplied printed with customer’s brand name
181181
Hinge arm cover cap
Height of hinge arm, including moun-ting plate with 0 mm spacing
695Hinge arm height
Length of hinge arm 695Hinge arm length
Diameter of hinge boss at widest point and also diameter of drilling
695Hinge boss diameter
Used to fix hinge boss but also acts as a cover (INSERTA)
695Hinge boss flange
Lip at hinge boss edge designed to prevent the hinge from sitting at an angle in the pre-drilled hole
695Hinge boss lip
Fixing positions in cabinet or drawer profile
358Hole pattern
Information
General Information▶Glossary▶▶
Catalogue 2013/2014
Info
rmat
ion
715
Mounting plate for horizontal fixing positions using chipboard screws or knock-in
Pull-out or drawer mounted behind a door or high fronted pull-out
322330
Inner drawer/inner pull-out
Assembly method for tool free attach-ment of fittings
200360
INSERTA
Holds the fitting in place for machine insertion
656Insertion ram
Front is set back flush between cabi-net sides
695Inset door/front
Effective cabinet internal depth mea-sured from front to back
699Internal cabinet depth LT
Set with all kitchen accessories (1 knife holder, 1 film dispenser, 1 foil dispenser, 2 plate holders, 2 spice holders)
593Kitchen accessory setK
Stores 9 knives of various sizes 593569589
Knife holder
Hinge boss for knock-in assembly to door, via machine or special insertion tool
693Knock-in boss
Activating the BLUMOTION function for METABOX
416447
LatchL
Adjustable to keep contents from slipping out of place
570Lateral divider
Front that overlays cabinet side 699Lay-on front
Lever arm for AVENTOS HS und HL, connects the lift mechanism to the front
4656
Lever arm
Assists the opening of AVENTOS with its spring package and variable stop
3046566680
Lift mechanism
Drawer can be locked into the open position
701Lock-open stop
Drawer is stopped in the fully open position. Prevents the drawer from moving in or out of the cabinet
701Lock-out stop
Part connecting runner and pull-out 476Locking device
Can also be used for front tilt adjust-ment
328Longside gallery rail
To mark the fixing positions of fittings 636Marking templateM
Pull-out element for A4 sized hanging files in homes and offices
354446
METAFILE – file drawer
Minimum gap that is required to open a door. Dependent on hinge type and door thickness
696Minimum gap for doors
Minimum gap that is required to open a pull-out
699Minimum gap for pull-outs
CRISTALLO furniture hinge for double mirror. Fixing using adhesive technolo-gy without door drilling
126Mirror door hinge
Where mounting plate is fixed to each side of a single cabinet panel
172212
Mounting plate that is suitable for a twin ap-plication.
Space required by a drawer runner between drawer and cabinet, must be considered when calculating the drawer width
699Mounting width
Suitable for drilling in 2 axis 656Multi swivel drilling head
Hinge with special geometry that en-sures the door does not protrude into the cabinet aperture when opened
110Nil protrusion hingeN
The dimensions given in the catalogue for determining the drawer length
321Nominal length of run-ner system
Hinge boss for glass doors 128Nylon boss
Cylindrical roller made of high impact nylon in MOVENTO and TANDEM runner systems
472Nylon cylindrical roller
Movement of a front when opening and closing
697Opening action/move-ment
O
Max. area that a front can open 697Opening angle
LED in drive unit and transformer – displays the operational status
403Operating mode display
Drawer push-out distance with TIP-ON. Due to production tolerances, the output path can vary under load and/or with adjustment.
462478
Output path
Information
General Information ▶Glossary ▶▶
Catalogue 2013/2014
Info
rmat
ion
716
Application where door overlays rather than insets cabinet side
695Overlay application
Pull-out can be extended beyond the front edge of the cabinet
701Over extension
Location of pivoting points in hinge. They determine the pivoting motion of the door when opened and closed
697Pivoting point/pivoting system
P
Ergonomic solution for storing plates in the high fronted pull-out
572572585
Plate holder
Adjustment in both directions starting at a certain pre-fixed position
200361
Plus/minus adjustment
Used to determine type & number of AVENTOS-lift mechanism for a given application
3046566680
Power factor LF
Hinge for thick doors and doors with profile
116Profile/thick door hinge
Prevents accidental removal of drawer, either with additional part or integrated into system
687Pull-out stop
Chuck to hold drill bits, for use with quick connect sleeve
656Quick connect chuckQ
Space required in order to remove the drawer from the cabinet
699Removal/insertion space
R
Revolving handle to select pre-set set-tings of the PRO-CENTER work table
616Revolving handle
Runner element is a roller carriage with load-bearing and side-supported nylon cylindrical rollers
698Roller carriage runner
Drawer runner that runs on nylon rollers
701Roller runner
Fencing system for work piece, calib-rated in mm and designed to accept adjustable stops
654Ruler
Hinge boss for screw fixing 693Screw-on bossS
Mounting plate for fixing with chip-board screws; for cabinet sides which are not pre-drilled
172Screw-on mounting plate
Single: only one drive unit moves (standard setting)Multiple: when set to “Multiple,” drive units move simultaneously
403545
Selector switch “Mode”
Full: standard settingHalf: for short nominal lengths (270 - 300 mm) – pull-out only moves a short distance
403545
Selector switch “Power”
The SERVO-DRIVE switch uses wireless to communicate with the SERVO-DRIVE for AVENTOS drive unit. The 2.4 GHz frequency can be used worldwide
30465680
SERVO-DRIVE switch
Electrical motion support system for drawers, pull-outs and lift systems
560504
SERVO-DRIVE
The left cover cap is used to cover the lift mechanism, drive unit and distribu-tion cable. To cover the cabling, it can be expanded up to an internal depth of 350 mm
30465666
SERVO-DRIVE cover cap for AVENTOS
Data sheet that contains set-up infor-mation for assembly machines
654Set-up plan
For adjusting the front at the side. For changing the side gap between two fronts
471Side adjustment
Additional product for improving side stability; ideal for wide pull-outs with short nominal lengths
250302353444464494
Side stabilisation
Pull-out cannot be extended all the way out of the cabinet due to the runner stop position
413473547701
Single extension
A user-friendly, ergonomic alternati-ve to conventional solutions behind swivel and bi-fold doors
240344
SPACE CORNER
The space requirement of a runner or a runner system must be taken into account when planning the number and size of drawers for a cabinet
699Space requirement
Mounting plate height. Standard spacing is 0 mm. Mounting plates with a higher spacing change the front overlay and in turn the gaps between doors
172Spacing
Screw for 5 mm system drilling with a special screw head
356Special system screws
Information
General Information▶Glossary▶▶
Catalogue 2013/2014
Info
rmat
ion
717
For storing spice containers of diffe-rent sizes
593Spice holder
Mounting plate with a split dowel and pre-mounted special system screws, for assembly by hand
172Split dowel plate (EXPANDO)
Total carrying capacity of a runner (weight of drawer plus load) based on loads, applied for a short duration onto the drawer front
689Static load bearing
Steel hinge boss 102206
Steel boss
Adjustable stop located on the ruler of an assembly machine
656Swivel stop
Connection linkage that ensures reliable opening and secure closing for pull-outs in combination with the TIP-ON mechanical opening support system
407478
Synchronisation
Up to three drive units can be synchro-nised allowing them to move simulta-neously. This function is required for several cabinets with a uniform front
369507
Synchronisation
Two drive units that are required to open simultaneously must be connec-ted via the synchronisation cable
369403
Synchronisation cable
Interplay between drawer profile and lower carriage system in MOVENTO runner systems
458Synchronised feather-light glide
Fascinating front motion technology for SPACE CORNER: When opened, fronts fold inward, preventing them from fouling the neighbouring cabinet
240344
SYNCROMOTION
Cruciform mounting plate for 32 mm line drilling
172System plate
Screws for 5 mm system drilling 88252
System screws
The telescopic arm for AVENTOS HF – connects the lift mechanism with the bottom front
3034
Telescopic armT
Door thickness 103692
Thickness of door
Angle adjustment of a high fronted pull-out
361455502
Tilt adjustment
The mechanical opening support system for handle-less fronts for hinge and pull-out systems
64194406406
TIP-ON
Tolerance adjustment in the runner system
700Tolerance compensa-tion
The transformer is easily and securely stored in the transformer unit housing
30370507
Transformer unit hous-ing
For a transition-free opening motion when using SERVO-DRIVE
368403
Trigger guidance
The trigger path is required to activate the drive unit and trigger the opening motion
371509
Trigger path
Area on the front which can be pressed to trigger TIP-ON and open the drawer. The trigger area largely depends on the front gap, the nominal length used and the door weight. You can increase the trigger area by using the synchronisation feature
462478
Trigger range
(Dual application) Hinges are attached on opposite sides of a single cabinet section. Both doors overlay to approx. half of the central panel
695Twin application
AVENTOS remains in any desired position
30Variable stopV
Drawer profile is visible when drawer is fully extended
548Visible runner
Hinge with an opening angle of more than 150°
110Wide angle hingeW
Support for work piece 655Work table
Or factory setting. Factory-set fittings, pre-set at defined door or front posi-tions
103Zero positionZ
Zinc die-cast hinge boss 114210
Zinc boss
Information
General Information ▶Glossary ▶▶
Catalogue 2013/2014
Info
rmat
ion
718
Information
General Information▶Glossary▶▶
Catalogue 2013/2014
Info
rmat
ion
719
Information
General Information ▶
Info
rmat
ion
Catalogue 2013/2014
720
Information
General Information▶Part No. Index▶▶
Part no. Page Part no. Page Part no. Page171A5010 137, 139, 141, 143, 147, 151,