Calibration Laboratory Since 2001 ISO/IEC 17025 NABL Accredited Lab Electro- Technical Time Thermal Temperature, Humidity Mechanical Mass, Volume, Dimension, Acoustics, Acceleration, Force Contact : Ahmedabad Textile Industry’s Research Association (ATIRA) Dr. Vikram Sarabhai Road, P. O. Ambawadi Vistar, Ahmedabad -380 015 Phone : (079) 26307921-22 Ext : 383 Website : www.atira.in email: [email protected]
8
Embed
Calibration Laboratory · Scope o Mass/Weights: Ranges 1mg to 50kg o Weighing Balance: Ranges 1mg to 50 kg Calibration of Instruments o Analytical Weighing balance, eighing scales.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Calibration Laboratory Since 2001
ISO/IEC 17025 NABL Accredited Lab
Electro-
Technical Time
Thermal Temperature,
Humidity
Mechanical Mass, Volume,
Dimension, Acoustics,
Acceleration, Force
Contact :
Ahmedabad Textile Industry’s Research Association (ATIRA)
Dr. Vikram Sarabhai Road, P. O. Ambawadi Vistar, Ahmedabad -380 015
o Viscometer, Viscosity Cup, Viscosity Liquid, etc.
Volume & Viscosity
Scope o Pressure: 0 to 30 bar o Vacuum : 0 to -1 bar o Velocity : 0 to 35 m/s
Calibration of Instruments o B.P. apparatus, Oxygen Gauge, Pressure Gauge,
Vacuum Gauge, Digital Manometer, Pressure Switch, Pressure Transmitter, etc.
o Anemometer, Air Velocity Sensors etc.
Pressure & Velocity
Scope o Acoustics : 94 dB & 114 dB o Speed : 50 to 20000 RPM o Illumination
Calibration of Instruments o Sound Level meter. o Contact & Non-contact type Tachometer. o Lux meter, Holmium Filter, Didymium filter, o Validation of Sodium Light source, etc.
Acoustics, Speed & Illumination
Scope
o External Micrometer : 0 to 50 mm
o Vernire Caliper : 0 to 300 mm o Dial/ Wobble Gauge : 0 to 25 mm o Thickness Gauge : 0 to 25 mm o Depth Gauge : 0 to 30 mm o Measuring Scale : 0 to 600 mm o Plug Gauge : 0 to 50 mm o Mandrel : 0 to 50 mm
Calibration of Instruments o Micrometer, Vernier, Crimp, Cross Hatch, Film Applicator, Measuring
Tape, Slip Gauges, Dial Gauge, Stature Meter, S.S. Scale, Crimp meter, Mandrill, Height Scale, Sieves, Filter Pad, Angle Dekor, Crease Recovery Tester, GSM cutter, Wobble Gauge, GO NO GO Tester.
Dimension
Calibration of Instruments o Tarp Gauge, Tablet Hardness Tester, Proving Ring,
o Hydrometer, Butyrometer, Lactometer, Twaddle meter, Mud Balance
Density
Standard o pH / conductivity Buffers, Temperature sensor
Capability to calibrate
o pH / Conductivity meter
Standard o Breath alcohol simulator for 0.0% to 1.0% .
Capability to calibrate
o Breath analyzer .
Electro-Chemical
Alcohol Content
Scope o DC Voltage : 1 mV to 1000 V o DC Current : 100 μA to 10 A o Resistance : 1 Ω to 100 MΩ o AC Voltage : 100 mV to 1000 V o AC Current : 100 μA to 10 A o Frequency : 45 Hz to 100KHz o Capacitance : 10 nF to 1 mF o Temperature simulation : -200ºc to 600ºc o Time : 40 s to 24 hours
Calibration of Instruments o Digital Multi meter, Clamp Meter, Megger, Universal
calibrator, Resistor Bank, Earth Resistance tester. o Stop watch, Timer, Digital clock.
Electro-Technical
Scope o Temperature at Lab for sensors : -80º c to 1200º c o Temperature at site : -80º c to 1200º c o Humidity at site & Lab : 22% to 95% RH
Calibration of Instruments o Liquid glass thermometer. o RTD/ Thermo couple with or with out indicator. o Oven Muffle Furnace, Water bath, Deep freezer, COD,