Power players of the horizontal railing industry, cable railing and rod railing systems are known for standing out in all the right ways. The Viewrail cable railing system replaces bulky turnbuckles with hidden fasteners and frames your view with simple elegance. Rod railing is equally petite while providing additional strength, easy cleaning, and low maintenance. Both Viewrail systems offer all the safety you desire with a beauty beyond expectations. Take a look at some of these specifications for rod railing and cable railing. Then, speak to a Viewrail representative to design the perfect system for your project. Let's get started! For questions about Cable Railing, Rod Railing, or any other products, call your Viewrail representative today! © 2018 Viewrail All Rights Reserved. • (574) 742–1030 • www.viewrail.com Cable Railing vs. Rod Railing System Specifications Rod Railing Cable Railing Infill Width 1/4″ 5/32″ Infill Length (Cut On-Site) Lengths up to 20′ 100′ & 400′ Spools Cutting Method Cut-off Wheel on Grinder Manual Cable Cutter Hole Size 1/2″ holes for Fittings 5/16″ holes for pass-through 1/2″ on Level and Angle Runs Hole Spacing 3 1/8″ 3 1/8″ Post Spacing 4′ Maximum 4′ Maximum Used as Gate Infill Yes No Compatible with Curved Applications Yes Sometimes