SECTION 05 Cable Railing Mounting Options and Mounting

SECTION 05720

Cable Railing Mounting Options andMounting Hardware Catalog

June 1, 2003

Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com

2/1/03

TABLE OF CONTENTSPage

Mounting Options

(Note: D1 through D6 refer to reference notes in Ultra-tec® Product Design & Fabrication Guide)

D1 Floor Plates for 3" x 1" Rectangular Tube Posts M-1Facia Mounting Plates for 3" x 1" Rectangular Tube Posts M-2Concrete Embedding for 3" x 1" Rectangular Tube Posts M-3

D2 Floor Plates for 2" x 1" Rectangular Tube Posts M-4Facia Mounting Plates for 2" x 1" Rectangular Tube Posts M-5Concrete Embedding for 2" x 1" Rectangular Tube Posts M-6

D3 Floor Plates for 2" x 2" Square Tube Posts M-7Facia Mounting Plates for 2" x 2" Square Tube Posts M-7Concrete Embedding for 2" x 2" Square Tube Posts M-8

D4 Floor Plates for 1-1/4" Pipe Posts M-9Facia Mounting Plates for 1-1/4" Pipe Posts M-10Concrete Embedding for 1-1/4" Pipe Posts M-10

D5 Floor Plates for 1-1/2" Pipe Posts M-11Facia Mounting Plates for 1-1/2" Pipe Posts M-12Concrete Embedding for 1-1/2" Pipe Posts M-12

D6 Floor Plates for 2" Pipe Posts M-13Facia Mounting Plates for 2" Pipe Posts M-14Concrete Embedding for 2" Pipe Posts M-14

D7 Additional Steel Facia Mounting/Fabrication Specifications M-15

D8 Additional Wood Facia Mounting/Fabrication Specifications M-15

Stringer/Wall Mount Pads

For 1-1/4" and 1-1/2" Pipe M-16For 2" Pipe M-17For Rectangular and Square Tube M-17


6/1/03

MOUNTING OPTIONSNote: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide

D1—Mounting Options for 3" x 1" Rectangular Tube Posts

End Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-8M (1018 C.R.S) FLP-8MS (304 S.S.)

Intermediate Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-7M (1018 C.R.S) or FLP-7MS (304 S.S.)

M-1


6/1/03

MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide

M-2

D1—Mounting Options for 3" x 1" Rectangular Tube Posts (continued)

End Post Facia Mounting Plate—Order Part No. FAP-3 (1018 C.R.S.) or FAP-3S (304 S.S.)

Intermediate Post Facia Mounting Plate—Order Part No. FAP-1 (1018 C.R.S) or Part No. FAP-1S (304 S.S.)

For additional facia mounting/fabrication specifications, see notes D-7 and D-8.


6/1/03M-3



Concrete Embedding—End Post

Concrete Embedding—Intermediate Post


2/1/03

D2-Mounting Options for 2" x 1" Rectangular Tube Posts

End Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-6M (1018 C.R.S) or FLP-6MS (304 S.S.)

Intermediate Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-4M (1018 C.R.S.) or FLP-4MS (304 S.S.)

M-4



2/1/03M-5



End Post Facia Mounting Plate—Order Part No. FAP-3 (1018 C.R.S.) or FAP-3S (304 S.S.)

Intermediate Post Facia Mounting Plate—Order Part No. FAP-1 (1018 C.R.S.) or Part No. FAP-1S (304 S.S.)



2/1/03M-6



Concrete Embedding—End Post

Concrete Embedding—Intermediate Post


2/1/03M-7


D3—Mounting Options for 2" x 2" Square Tube Posts

End or Intermediate Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-5M (1018 C.R.S.) or FLP-5MS (304 S.S.)

End or Intermediate Post Facia Mounting Plate—Order Part No. FAP-2 (1018 C.R.S.) or FAP-2S (304 S.S.)



2/1/03M-8


D3—Mounting Options for 2" x 2" Square Tube Posts

Concrete embedding


2/1/03M-9


D4—Mounting Options for 1-1/4" Pipe Posts

Floor Plate—Order Part No. FLP-1 (1018 C.R.S.) or FLP-1S (304 S.S.)

Floor Plate, Countersunk Screw Holes—Order Part No. FLP-1M (1018 C.R.S.) or FLP-1MS (304 S.S.)


2/1/03M-10


D4—Mounting Options for 1-1/4" Pipe Posts (continued)

Facia Mounting Plate—Order Part No. FAP-4 (1018 C.R.S.) or FAP-4S (304 S.S.)


Concrete embedding


2/1/03M-11






2/1/03M-12



Facia Mounting Plate—Order Part No. FAP-4 (1018 C.R.S.) or FAP-4S (304 S.S.)


Concrete embedding


2/1/03M-13


D6—Mounting Options for 2" Pipe Posts




2/1/03M-14


D6—Mounting Options for 2" Pipe Posts (continued)

Facia Mounting PlateOrder Part No. FAP-5 (1018 C.R.S.) or FAP-5S (304 S.S.)


Concrete Embedding


2/1/03M-15

MOUNTING OPTIONS (continued)

D7—Additional Facia Mount Steel Mounting/Fabrication Specifications

D8—Additional Facia Mount Wood Mounting/Fabrication Specifications


2/1/03M-16

STRINGER/WALL MOUNT PADS

Our wall mount pads are for welding under the toprail and providing a hole for a fastener that goes throughthe pad and into the wall. We also use these pads for

mounting posts onto the top of stringers, especially incases where a wooden stringer is the base mountingsurface.

Stringer/Wall Mount pad—1-1/4" Pipe—Order Part No. SP-1 (1018 C.R.S.) or SP-1S (304 S.S.)

Stringer/Wall Mount pad—1-1/2" Pipe—Order Part No. SP-2 (1018 C.R.S.) or SP-2S (304 S.S.)


2/1/03M-17

Stringer/Wall Mount Pad—2" Pipe—Order Part No. SP-3 (1018 C.R.S.) or SP-3S (304 S.S.)

Stringer/Wall Mount Pad—2" x 2" & 2" x 1" Tube—Order Part No. SP-4 (1018 C.R.S.) or SP-4S (304 S.S.)



SECTION 05 Cable Railing Mounting Options and Mounting

Documents