BIHAR AGRICULTURAL UNIVERSITY SABOUR-813210, (BHAGALPUR), BIHAR SHORT TENDER NOTICE No.108 Sealed EOI are invited through registered /speed post /courier services, from Reputed/Registered, Supplier/Dealers/Firms/Company/Enterprises for the supply of Laboratory Equipments during 2015-16 & 2016-17. Sealed envelope containing full information along with supporting documents, should reach in the office of the undersigned on or before 02/02/2016 upto 4.00 P.M. Details are available on www.bausabour.ac.in . O/I Central Store (H.Q.)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BIHAR AGRICULTURAL UNIVERSITYSABOUR-813210, (BHAGALPUR), BIHAR
SHORT TENDER NOTICE No.108 Sealed EOI are invited through registered /speed post /courier services, from
Reputed/Registered, Supplier/Dealers/Firms/Company/Enterprises for the supply of Laboratory
Equipments during 2015-16 & 2016-17. Sealed envelope containing full information along with
supporting documents, should reach in the office of the undersigned on or before 02/02/2016
upto 4.00 P.M. Details are available on www.bausabour.ac.in.
O/I Central Store (H.Q.)
List of Equipment/InstrumentsSl. No.
Name of Item Specification EMD (Rs.)
1. Bench-top Refrigerated Centrifuge with Rotors
Running power = 220 – 240 VAC, 50 Hz, running temperature – 4 °C to ambient with custom settings, max.RCF= 16000 g, option for adjusting the RCF / RPM and time, provided with fast cooling option, display for RCF / RPM, time, temperature, capacity to accommodate rotor for 1.5 / 2ml eppendorf tubes and 20-50 ml Falcon tubes.
11,000
2. Digital Plant Canopy Analyzer
The instrument should be suitable for non-destructive measurement of Leaf Area Index, PAR, Solar Beam transmission coefficients, diffused radiation transmission coefficients, mean foliage inclination angle, Plant Canopy extinction coefficient. Measuring time: 1 sec. Fish-eye lens angle : 160O-1800 Image Resolution : 700 x 500 pixelsProbe Size : 20 x 20 mmArm Length : 400-600 mmThe instrument should includes with built-in Digital Camera imaging probe with auto leveler built in PAR sensor, high energy rechargeable battery, battery charger operating manual, and carrying case etc.
7,000
3. Electronic Micro WeighingBalance
Weighing balance with LCD display, accurate and precise measurement.Features – GLP Compliant and RS232 port for Printer / PCReadability 0.1mg Weighing Capacity >200g Tare Range – 220g Repeatability 0.1 mgLinearity ± 0.2 mgStabilization Time <3s Calibration Internal automatic CalibrationPan Size ~85mm Dia (aprox.)
2,100
4. UV-Visible Spectrophotometer, USB cable, Software, Printer and Computer included
Wavelength range: 200 nm or below to 830 nm or above, Wavelength accuracy: +/- 1 nm, Light Source: Xenon flash lamp, Automated data analysis after user defined settings, Measurements for cell density, Determination of quantity and purity of nucleic acids (DNA and RNA), Determination of labeling efficiencies, Colorimetric assays for enzymatic activities, Measurement and record of UV/Vis spectral ranges or justmeasure individual wavelengths from 200 nm or below to830 nm or above, option to select user required wavelength for all future applications, Cuvette path length = 10 mmMinimum volume = 200 ul
12,000
5. Portable Leaf Area Meter
Field portable, Battery operated for the in-situ measurement of Leaf Area, width, length, perimeter and whole area. Should have the latest high speed scanner sensor technology enabling measurement to be made faster and easier than ever. Should display the image of the measured leaf and image can be stored and downloaded to PC. Parameters to be measured: Length, area, width, perimeter Average and accumulated area, Units of measurement: User selectable mm, cm, inches, Max. measurement width : 10 cm, Precision : 1% linear, +/- 2% area, Resolution : 0.065 mm2, Memory : 2000 data sets, Display : 64 x 240 pixel graphic display, Battery : Nickel metal hydride 1.2 Ah, Weight : 1.8 Kg., Carrying Bag Battery charger Instruction manual Basic Spare parts kit and data down loading Cable
7,000
Page 2
6. IRGA Field portable, provided with stand, rechargeable batteries. Leaf chamber: small for measuring cereals photosynthetic rate and large for measuring bigger leaves as that of maize and trees.
54,000
7. Pulse Modulated Chlorophyll Fluorometer
Weighs <1.5Kg, at least 20 hour battery life, 660 nm and 450 nm excitation channels, Dual Halogen and LED actinic light and saturation pulse sources, 2 GB integral memory, USB, Ethernet & RS-232 connectivity, dark adapting clips
12,000
8. Chlorophyll Content Meter
Measured parameters: CCI value, Measured area: 1cm diameter circle, Resolution: 0.1 CCI unit, Repeatability: +/- 1 %, Sampling acquisition time: 2-3 seconds, Storage capacity: More than 150,000 measurements, User Interface:128 x 32 pixel graphic display, data manipulation, beep signal status and warnings, Output: USB 1.1 and RS232, Operating temperature range: 0-50 oC. Temperature compensation: Temperature compensated source and detector circuitry for minimal drift over full range, Battery: ~10 V alkaline battery, Auto off interval: 4 to 5 minutes, Dimensions: 100-150 x 70-80 x 20-25 mm3, Weight: 150-200g
7,000
9. Vernier Caliper Digital, measurement: 0.1 mm to 10 cm, Weight less than 200g, data storage card system
1,300
10. Additional Rotor for a already installed benchtop cooling centrifuge (5430R, Eppendorf)
6X50 ml rotor (incl. rotor lid, sleeve and adapter), Model: F-35-6-30, Make: Eppendorf
3,000
11. Fume hood for plant molecular biology laboratory
Dimensions (WXDXH Approx.) mm: 1200 X 750 X 1600, Exterior: SS 41 plate 1.2t (epoxy powder coated), Interior: Trepsa, Windows and Sash: Safety clear glass 5t & A1 sash, Cabinets for acids/bases and organic solvents
6,000
12. Refrigerated Incubator Shaker
1. Shaking Frequency: Approx. 50 -350 rpm2. Shaking Deviation: +/- 2% of the set value3. Shaking Indication: Digital4. Shaking Motion: Orbital5. Tray Dimension: Approx. 400 x 400 mm6. Universal tray should hold approx. 35 Nos of 100 ml flasks/25 Nos of 250 ml flasks/16 Nos of 500 ml flasks/ 9 Nos of 1000 ml flasks/4 Nos of 2000 ml flasks7. Should provide all different types of clamps mentioned in earlier point.8. Temperature Range: Approx. 10° C to 60° C9. Temperature Accuracy: not more than +/- 0.5° C 10. Temperature Sensor: high quality11. Temperature control Indication: Digital12. Audible & Visual alarm for temperature deviation13. There should be the provision for keeping at least one stationary tray13. Electrical Requirement: 220-250V, 16 Amps, 50 Hz14. Warranty: 12 months from the date of installation. 14. Should fulfil the requirement of National and International safety measures
5,000
13. Ethidium bromide decontamination system
1. Capacity- approx. 10 lits2. Able to remove >99% of mutagenic ethidium bromide (EtBr) from electrophoresis buffers and EtBr staining solution. 2. After EtBr removal buffer can be safely poured down in to the laboratory drain without any further treatment.4. Provision to replace bind EtBr cartridge or filter5. Also send the quotation for EtBr cartridge or filter, separately.
5,000
14. Empty Liquid Capacity- approx. 20 L & 50 L 800
Page 3
Nitrogen Container Double wall vacuum and insulation which provides long term storage of liquid nitrogen
15. Empty Liquid Nitrogen Container
Capacity- approx. 10 L Double wall vacuum and insulation which provides long term storage of liquid nitrogen
800
16. Horizontal laminar air flow
1. Should have the working space and HEPA filter of around/more than 100 x 50 x 50 cm2. Should have digital controller3. Working space should be made of stainless steel4. Should provide illumination around/ more than 2 x 35 W
2,400
17. Non-refrigerated table top centrifuge
1. Should accommodate at least 16 micro-centrifuge tubes of 1.5 ml / 2 ml capacity2. Should provide around/more than 13000 RPM3. Should provide around/more than 12000 x g RCF4. Noise level should be < 65 dB5. Acceleration time for maximum speed should be around/ less than 25 s6. Deceleration time from maximum speed should be around/ less than 25 s
2,400
18. Ultra-sound sonicator 1. Processing volume range should cover 300 micro l to 30 ml 2. Should have the provision of fitting different probes 3. Should provide more than 15 kHz power4. Should provide stand with holder5. Should provide sound enclosure system6. Should be operated in switch-regulated continuous or discontinuous mode7. Should have control over the amplitude
9,000
19. Gradient -PCR i. Independent temperature block(8-16 different temperature gradient) and gradient accuracy over a range of 1-20 degree C.ii. User interface through colour touch screen.iii. Amplification ability upto the range of 2 Kb in short durationiv. USB port for data transferv. 96 well block format(sample block of 0.2 ml capacity) with automatic height adjustment for 0.5 ml tubes or 96 well PCR plates.vi. Max. block Ramp rate: 4-5 degree C/sec and max sample block Ramp rate: 3-3.54-5 degree C/sec.vii. A campatible Voltage stabiliser
8,000
20. Horizontal Gel Electrophoresis system with power pack
i. Gel System Mini (Horizontal): Sample Flexibility: max. 36Buffer Volume: 500-700 ml Gasketed U.V. Transmissible (UVT) Gel Tray,2 Combs: 1.5 mm thick, Gel Volume: 50-80 mlii. Gel System Midi S(Horizontal):Sample Flexibility: max. 160Buffer Volume: 1000 ml,U.V. Transmissible (UVT) Gel Tray with End Gates 4 MicrotiterCombs: Gel Size (width x length): 15 x 15 cm,Gel Volume: 100-120 mliii. Maxi Gel System:Sample Flexibility: max. 168Buffer Volume: max. 2300-2500 ml, U.V. Transmissible (UVT) Gel Tray Gel Volume:230- 250 mliv. Pwer Pack: Input Power: 230 VAC, 50-60 HzTimer: 0 - 99:59 hVoltage: 2 - 300 VCurrent: 4 - 500 mAPower: 0 - 90 WMin. load rasistance: upto 1 ohmDisplay: LCD
7,000
21. Deep Freezer. (-80 to -86 Degree Celsius (For
Deep Freezer Vertical typeCapacity around 400 ltrs.
10,000
Page 4
Storage of Plant Tissues, RNA, Enzymes and Antibiotic)
Temperature: -60 to -860CVoltage: should be operate on 220 V / 440 VMicroprocessor controlled. CFC free refrigerants. Automatic voltage boost compensate for low voltage and brown-out condition. Integrated over temperature safety alarm with battery backup and audible warning of temperature deviation. Washable condenser filters to keep fins free of dust to maintain peak cooling efficiency. Digital temp. Display. Push button set point display.
22. Electroporator (For transformation of E. coli and Agrobacterium)
Microprocessor Controlled, With Digital Display both for current and time, Both Manual and Pre set settings for E. Coli, and Agrobacterium, Output Waveform: decaying or truncated decaying exponential-decay with resistor capacitor time constant Voltage and current: 3,000 V peak into >600 W load; limited at 100 A peak maximum, Voltage adjustable in 200–3,000 V range with 10 V precision; 5 ms default or 1–4 ms with 0.1 ms precision, Input voltage 220–240 V, Operating environment 3.5–35°C
6,000
23. Transgenic Green House (As per DBT Biosafety level – 2 guideline)
1. Unit Area: 750 Sqft. Approx.2. Buffer Chamber (Aprox.): 5’ x 7’ with double door system3. Doors: 2 Nos. size (Aprox.): 2.0m x 1.0m each4. Super Structure: made of ISI marked G.I. sq. pipe vertical polls & truss and other supports5. Glazing: all sides and top with triple wall U.V. Stabilized Poly Carbonate sheet to be fixed with polycarbonate ‘H’ & ‘U’ profile/ aluminum strips, all the joints of sheet duly filled with silicon sealant to avoid air leakage.6. Cooling System: ECS with fan and cellulose cooling pad, motor, water storage approx. 500 ltr, 7. Humidification System: by providing, super-fine static mister especially designed for cooling and humidifying green houses, mist Chambers over rooting tables and livestock, HD motor, filtration unit, water storage 500 ltrs, 8. Controller Panel: Microprocessor based fully programmable for Temperature, Humidity & 24 x 7 programmable photoperiodic light controller fitted panel, programmable with protection controller etc. 9. Roof Screen: 75% OR 50% shading net to deduct light intensity, provided on roof with manual gear operated for easy folding/ rolling of net.10. Air Curtain: 3’ wide heavy duty installed at entrance door with auto On/Off switch.11. Lighting System: Photo-synthetically Active Radiation Lamps with photo-simulator 12. Outer Screen: As per DBT guidelines, all vent area should be covered with stainless steel 40 mesh, fixed on pipe frame living appropriate space to cover fan, pad, A/C etc. from outside.13. Plumbing: All water lines cocks/ valves to close for maintenance, float valve to control water level and all other accessories as per requirements 14. Electric Fitting: All ISI marked, Copper wire (1.0mm to 4.0mm as per requirements) Switches 5-15Amps, MCB 6 Amps- 40 Amps as per requirements15. Steel Bench: 10 Nos. size (aprox.) 6’x 3.0’ x 2.6”, frame made of G. I. sq. pipe with supported polycarbonate top, movable with wheel 16. Foundation: Grouting of side poles in CC 1:3:6 (30 x 30 x 60-75cm) below GL17. Curtain wall: All side of the structure 23 cm wide 45cm above ground level with 30 cm foundation and with PCC base, duly plastered and painted18. Flooring: Flooring with 75mm thick base over that CC 40-50mm thick, top with good quality non-slippery ceramic floor tiles. 19. Plinth Protection: 50cm wide 35mm thick 1:3:6 CC over bricks bat base
18,000
Page 5
with drain all side of green house.24. Incinerator for plant
and microbial waste material
Capacity: Approx 50 kg, Automatic and electrically operated with electrical control panel and digital temperature meter, Capacity for Instant disposal of plant and microbial dry waste with Front Opening Door to be used to load waste as well as cleaning and checking purpose, need to be fitted withinside refractory lining giving excellent high heat retention, The ash to be collected in an Ash Collection tray at the bottom of the incineratorStainless Steel Exhaust pipe (Chimney) with either self supported or guy-rope supportedChimney with Tower installation with lamp as per requirements
11,000
25. Spectrophotometer Instrument must have a full graphical display and pre-installed methods for the determination of nucleic acid purity and concentration, protein concentration, bacterial cell density and having ability to measure Absorbance or concentration at any wavelength without the requirement of a computer with the following specifications: Light source – Xenon lamp, Wavelength range: 190 nm or below to 900 nm or higher, bandwidth: 5nm, Detector: 1024 element CCD array, Wavelength accuracy atleast ± 2nm, Photometric Range: -0.300A or below to 2.500A or higher, Provided with an onboard large graphical display for interpretation and analysis of the result, Scans for nucleic acid for purity checking (between wavelength 220 nm or below to 320 nm or higher), Compatible with standard 10 mm pathlength cuvettes, disposable cuvettes and low volume cuvettes, provided with onboard software for data interpretation and analysis and a printer for printing the result, Software must include the methods for DNA, RNA and oligonucleotide calculations, protein assays such as direct UV measurement, BCA, Biuret, Bradford and Lowry and measurement for the cell density. Power requirement = 220 – 240 VAC, 50 Hz, One year Warranty
8,000
26. Wet sieve shaker - (Yoder type) for simultaneous operation with four sets of sieves.-Four sets of sieves to be supplied.-Automatic 0-60 minute timer.
1,400
27. Dry sieve shaker - sieve table is inclined from the vertical axis and the direction of inclination changes progressively -100 mm sieve diameter-Capable of using up to 6 sieves in a stack
1,500
28. Constant head permeameter assembly with brass permeameters
- furnished with a piezometer tube, scale, water fittings, porous stones and pedestal base. - The chamber is clear plasticand constructed in two sections to accommodate undisturbed or remolded samples.
500
29. Changing head permeameter assembly with brass permeameters
- furnished with a piezometer tube, scale, water fittings, porous stones and pedestal base. - The chamber is clear plasticand constructed in two sections to accommodate undisturbed or remolded samples.
600
30. Soil Air permeameter -Easy manual operation-Proven accurate measure-Multi sample sizes using the fast-exchange sample holder-Operating pressure max: 0.5 bar-supplied with external pressure source.
600
31. Soil moisture and temperature meter
-Probes for measuring temperature and moisture for multiple depths (5, 10 and 20-cm).
500
Page 6
with data logger -Capable of giving direct readings of volumetric moisture content.-5 m data cable with option extension.- Measurement Range -0 to 0.450 m3/m3 volumetric water content (0 to 45.0%)-Operating Environment - -40°C to 50°C -Data logger facility.-on board thermistor
32. Infra red thermometer
-Allows non-contact temperature measurement of a 3” diameter target from 12 feet away-Digital display
1,000
33. Pocket penetrometer - Lightweight direct reading penetrometer- The spring-operated device- permanent scale on the piston barrel reads approximate unconfined compressive strength in kg/cm2
- An indicator sleeve retains reading after piston is released
100
34. Pressure plate apparatus
-capable of measurements in 0.1 to 15 bars suction.-two extractors with ceramic plates - Accessories, soil sample rings, a pressure control panel and a compressor to be supplied-Compressor should be of maximum pressure 2.0MPa (20bar) with built-in safety precautions, completely guarded and quiet.- provision to place several ceramic plates with soil samples in the extract at the same time.
26,000
35. Soil tensiometers (6 nos)
-ceramic cup- Three nos for shallow depth measurement (30 cm)- Three for 60 cm depth.
200
36. Digital soil moisture meter
- Digital display- Capable of measuring upto 50-60 cm depth.
600
37. Aluminium soil moisture boxes (200 nos)
- Air tight lids- Can be used for 200g soil sample
400
38. Buouycos hydrometer (10 numbers)
- Molded, seamless construction with bouyoucos doublescale for all-around visibility.
- Never needs recalibration.
400
39. Hot air oven with digital temperature display (2 nos)
- stainless steel body- Digital temperature display and control- Fan for air circulation.
2,000
40. Digital balance -least count 0.01g-Max capacity – 200g
3,000
41. Double ring infiltrometer assembly with hook gauge (five sets)
-double ring apparatus -have one beveled edge,- small sledge hammer- Iron plate for hammering the assembly
600
42. Soil core sampler (complete set)
- stainless steel,-Sized by the outside diameter of the liner- Include: Slide hammer, core cup and cap, 2 plastic end caps, and plastic liner.
500
43. Pycnometer (nos) -Digital 1,00044. Guelph permeameter permeameter, metal tripod leg, borehole auger, Soil Auger, collapsible
water container, and vacuum test hand pump, all in a durable carrying case, maximum practical operating depth is 315 cm, tension adapter allows measurements to be made under tensional and very low tension (negative head) conditions, Auger Cutting Diameter: 5-6 cm Well Height Range: 2 cm to 25-30 cm
5,000
Page 7
Hydraulic Conductivity Range: 10-4 to 10-7 m/sec Collapsible Water container Capacity: 10 litreMaximum Permeameter Capacity: 3 liters
45. Metallic Hot plate with stainless steel top
-45 cm x 30 cm-Stainless steel top-Electrially operated-Temperature control and automatic cutoff
600
46. Stop watch -Digital Nil47. Digital room
thermometer (1 nos)
-Digital Nil
48. Glass thermometer with Hg column (2 nos)
- Nil
49. Thermocouple (5 nos)
-Suitable for measuring temperature of flame and oven fires-Temperature range upto 900 degree C.
400
50. Cone penetrometer -Static Cone Penetrometer-Takes readings in approx 15 cm depth increments.-Double rod structure- Outer rod of high strength chrome alloy tubing. -Inner rod of stainless steel.-Shaft assembly designed for a maximum of 250 lbf axial force.- range = 0-70kgf/cm2.
5,000
51. Soil compaction and consolidation assembly
- Mechanical screw loading jack, 10,000 kg. capacity with U-bracket and swivel head.- Penetration piston, 50 mm dia. threaded at the upper end.- Extension rods consisting of 2 lengths 5 cm. 2 lengths 10 cm., 1 length 30 cm.,1 length 50 cm., and 1 length 100 cm., used as spacers between the proving ring and penetration piston.- Connector set, has eight connectors for coupling the penetration piston and proving ring assembly either directly or through extension pieces. -Dial gauge support of seamless pipe construction that stands 30 cm high and 45 cm wide at the base. -Provided with a quick release screw type clamp capable of sliding and locking anywhere along 2 meter length of the bridge. -Supplied with annular metal weight 5 kg., 250 mm dia with 53 mm dia central hole, Slotted metal weight 5 kg., 215 mm to 250 mm dia with 53 mm dia slot, 2 Nos. Slotted metal weights, 10 kg., 215 mm to 250 mm dia with 53 dia slot 2 Nos- -Accessories : Dial guage 0.01mm x 25mm. High sensitivity Proving Ring 5000kg. capacity with calibration chart and carrying case.
2,000
52. SDS PAGE with power Pack unit.(Vertical)
Gel Size 8 x 9cm Runs 1, 2 gels simultaneously Glass plates and spacer plates with integrated 1mm and 0.75mm spacers. Leak proof without using gel or external sealing. Clamp to exert equal pressure on entire gels plate. Gel casting stand to allow casting of upto 2 gels. A complete range of combs -10 and 15 wells Able to run 8.6 x 6.8 cm pre cast gel. Optional cooling plate for temp. control Chamber material molted not
pested Glass plates - 3 packs and 1mm spacer plates – 2 (0.75mm 7 1mm Spacer) Output range – 10-300V, 0.01 – 0.4 A, 10-75W Constant current or voltage option with Timer
5,000
Page 8
4 recessed sets in parallel, Display – LED53. Micropipettes Pipettes should be suitable for research work with adjustable volume, two
buttom operation three year warranty, having physiocaretechnolology, lower part autoclavable.
Chemically resistant full polycarbonated body, four digit display, minimum pipetting error, IVD approved, TUV awarded.Range 0.5 to 10 µl, 2.0-20.0 µl, 10.0-100 µl, 20.0 to 200.0 µl, 100 µl-1000.0 µl,1000-10000 µl variable volume single channel electronic micropipettes.
Spring loaded Tip Cone: improved ergonomics, Tight fit to the tip. Quick connection clip: removed lower part easily. Adjustment opening: Adjusting pipettes to a specific liquid and volume.
Volume display four digit. Control button and ejector should positioned for perfect egronomics so
that very low operating force required. Perfect Piston System : Ultra light system made of forton.
3,000
54. Rocker Speed 10-50 rpm with timer Dimension 30x30 cm Power AC, 230 V, 50 Hz
400
55. Automatic N digestion and Distillation system(Kjeldahl)
Automatic macro block digestion, distillation and titration system (digestion block of atleast 20 samples at a time)
14,000
56. X-Ray Diffactometer Small angle diffractionSoftware along with computer.
1,80,000
57. Fourier Transform Infrared Spectrophotometer (FTIR)
Spectral Range Mid-IR ( 500-6000 cm-1)Software along with laptop.
30,000
58. Differential Scanning Calorimeter (DSC)
Temperature range : -140 to 600oC (With standard cooling chamber using liquid nitrogen) Software along with laptop
40,000
59. Particle size analyser-zetasier
Particle Size: 0.8 to 6500 nanometers Zeta Potential: +/- 200 mV,
50,000
60. Rotary shaker with conical flask holder
Compact counter balanced drive mechanism ensuring high stability and reliability even in continuous operation and uneven load distribution.
Step less electronic frequency control ensures gentle start and maintains preset speed.
Brushless Induction drive motor practically maintenance free. Speed is controlled through a SMPS based DC drive unit by a speed
control knob or a variable speed range from 20 RPM to 300 RPM. Digital display of speed with presetting facility. Fitted with Off/On timer for shaking time control. Shaking amplitude 30 mm. Universal Platform to accommodate interchangeable clamps (49/56/60
no’s) of assorted sizes for different capacity of flasks (100ml, 250ml). Automatic restart at preset speed in case of power failure.
2,800
61. Willy Mill Grinder (Stainless Steel Grinder)
All steel construction. ½ HP motor Stainless steel of 220 Volt A.C. Chamber fitted with hopper three delivery stainless steel sieves of 20, 40
& 60 mesh. Size of inner chamber is 100 x 50 mm. A removable safety Glass sheet plate from the face of chamber of permits
observation during operation. Willey Mill is fitted on substantial Cast iron base. Allen Key for adjusting blades and 3 Glass Jars, brush etc.
800
62. Hot water bath (high Double walled inner chamber made of Stainless Steel & outer made of 400
Page 9
capacity) Stainless Steel. Top has 75 mm holes with concentric rings. Temperature range upto 99°C. Accuracy ± 5°C thermostatically Controlled fitted with Neon Lamp; indicator and workable on 220 Volt 50 Hz. A.C.
Water level cut off device Digital temperature controller with an accuracy of ± 1 °C P.I.D. based temperature controller with an accuracy of ± 0.5°C.
Number of hole is 16 with concentric rings 63. Nephelo Meter Range: 0 to 1000 NTU
Display: 3 ½ Digital LED Accuracy : +/-3% Full Scale +/- 1 digit Resolution: 1 NTU/JTU Detector: Photo diode Light Source: 6 to 6.8V, 250 to 300 mA Tungsten Lamp Sample System: 30mm dia Clear Glass Test Tubes Calibration: With Formazine Solution Power Supply: 230V +-10%, 50 Hz AC with built-in Voltage Stabilizer Memory: In-built memory to retain both range standard solution and last set
value even after power loss Standard Accessories: One Set of 3 Glass Test Tubes of 30 mm. Dia&
Instruction Manual.
2,200
64. CHNS analyser 1. Microprocessor controlled CHNS Analyzer with integral keypad and capable for multiple operating modes with a sample (solids and liquids) size of 0-500 mgs. The instrument should work in the principle of ‘Frontal Chromatography’
2. Furnace temperature atleast 12000C, The analysis time should be within 6 minutes for CHN mode and 8 minutes for CHNS mode.
3. “Auto Regeneration” facility to regenerate chemicals in reduction tubes - should be built-in.; System should be offered with a 60-position auto-sampler for un-attended operation.
4. Imported regulator (directly from the manufacturer of the CHN analyzer) for the carrier gas must be offered in the main system; Auto start up, equilibration, wake up, shut down; Auto analysis and calculations, routine maintenance scheduling Auto pressure test on start up by solid-state pressure transducer; Continuous monitoring on diagnostics and digital read out of temperatures and pressures; Accuracy (%) should be < 0.3 and Precision (%) should be < 0.2 for
Analytical ranges: Element Range (mgs) C 0.001-3.6
H 0.001-1.0 N 0.001-6.0 S 0.001
Instrument should have gas saver mode and run counter. The instrument should have the capability to run using either Helium or
Argon as the carrier gas. System should be offered with at least 2000 analysis Kit for CHN and 500
analysis Kit for CHNS, including (a) UHP grade Helium gas filled cylinder (b) UHP grade Oxygen gas filled cylinder (c) UHP grade Nitrogen gas filled cylinder (d) Double stage SS regulators for Oxygen & Nitrogen gases (E) Suitable PC, Printer and UPS.
80,000
65. Stereo Binocular Microscope
UIS2(Universal Infinity System) plan infinity optics with antifungal treatment providing image flatness
10X(FN 20) paired eye piece Plan achromatic objectives 4X, 10X, 40X and 100X Seidentopf observation head, observation tube 30º incline interpupillary
distance adjustment range 40-75 mm 6V 20W halogen bulb
1,200
Page 10
66. Phase Contrast Microscope Halogen
4X & 10X Brightfield objectives, 40X phase objective, phase contrast insert, Walton-Beckett graticule, green
filter, 1.25 ABBE condenser,and 10x20 wide angle eye pieces. Anti-fungus treatment helps protect optical parts even in high humidity
regions. Inward-facing quadruple (CX31), or quintuple (CX41) revolving nosepiece
improves access and makes for quick, easy slide changes. Fixed Abbe condenser N.A. 1.25, centerable and focusable for Köhler
illumination. A 6V/30W halogen bulb provides ample illumination for any observation. Ergonomically designed frame with low positioned coarse and fine
focusing controls, Aanalyzer slot for linear polarized light (CX41 only Built in left or right hand stage with rackless design (CX31 right hand
only), low positioned X,Y controls with ergogrips to facilitate operation
2,200
67. Gas Chromatography with Mass spectroscopy
Including TCD (Detectivity: 300 pg/mL Butane), ECD (Detectivity 7 fg/sec Lindane) and FID (Detectivity 2 pg/sec) detector (Max. Temp. 450ºC) and 3 injectors with auto sampler
Mass spectrometer must be included where Mass filter: pre- and post-filter; high ion transmission efficiency lens-less design, Mass range (m/z): 10 to 1200 Da, Scan rate: up to 14,000 Da/sec, Resolution: user adjustable from Unit (0.7 Da) to 4 Da, with user selectable settings
A Multi-tasking operational system color touch screen with WVGA resolution.
Keypad, and display support selectable international languages, Multiple method internal storage with battery protected memory, Column
oven temperature programmable from ambient +4°C to 450°C, Column oven cryogen LCO2 ( to –60°C) or LN2 ( to –100°C),
Maximum temperature ramp rate: 150°C/min (optional, 180°C/min.),Rapid oven cool-down system
Complete electronic (or manual) flow control for injectors, (including split flow) and detectors.
Gas chromatography software, installation kit, Branded PC and Printer, Carrier gas cylinders, Calibration gas can, Gas purification Pannel also included
6,000
68. Deep Freezer(-860C)
Temperature range -00C to (-860C) Capacity 19,440 vials(388L) Micro processor controlled accurate & automatically operated by sense
of ambient temperature & voltage etc. LED digital display to clearly show the system status. Self testing S/W & multi alarm with battery back up alarm for audible &
visible for high – low temperature, power failure, sensor failure, high – low voltage fluctuation, over heated condenser , High – Low ambient temperature.
Remote alarm through internet (optional); Pressure (vacuum), equalizing design for easier door and painted sealing designed together with the cabinet from heat retardant keeps the cabinet safe from frosting.
Double compressor (danfoss) cascade refrigeration technology, highly efficient and reliable, high and EBM condenser fan; Noise level <48dB.
Pull down time: less than 6 hrs. Vacuum insulation panel material; sealed vacuum between insulation layers of PUF.
USB communication port: RS 232 port to transfer data etc. Access port as when required to log on to access the system (Event-logging through RS 232 port). USB communication, USB port in seven days chart
7,400
Page 11
recorder (optional) to store data manually or through RS 232 to your PC.Safety:
Safe door lock to prevent unauthorized opening. Multiple protection like pass word protection, automatic start up, delay compressor, self protected voltage back –boost etc.
Power 230V/50Hz.69. Autoclave Chamber volume: 85 Liter
Standard cassettes capacity: 15 Full No. of trays: 2 Voltage/frequency (hz):230V (50Hz) Power (w)/ current (a): 3000W/13A Cold Cycle Time: 31 Min. Hot Cycle Time: 21 Min.
1,600
70. Scanner cum printer A0 size
11 to 44-inch (28 to 111.8 cm) rolls / 8.5x11 to 44x66-inch sheets /up to 58sq ft/hr in best mode 2/up to 2400 x1200optimized dpi
10,000
71. Projector Bright stylish and easy to use – The affordable VPL-ES7 data, easy setup and operation, off and go, short projection distance, high security, close captioning, recommended lamp and filter replacement time approx 4000 / 3000 Hours
1,400
72. Atomic Absorption Spectrophotometer
Optics: True Double Beam optical design Monochromator: The system should be based on Echelle Grating and
optimized for both UV and Visible energy or equivalent. Slit width should be auto selectable
Detector : Solid State Detector preferred Wavelength Range: 190-900 nm System should have at least four lamp holders with built in power supply
for lamps All the method parameters related with lamp selection, calibration, and
control of flow gases should be through integrated software The instrument should have programmable gas control both for air
N2O/C2H2
The unit shall have flexiblity of purging the optics so that it can be operated even in demanding atmosphere of laboratory
The nebuliser should be resistant to all sorts of acids and solvents. It should have a built in nebulization device like flow spoiler and impact bead
Lamps should have built in code for current, slit width, wavelength and it should automatically optimize for energy for each lamp
The system should have built in power supply at least for one lamp so as to accommodate lamps like As, Se, Hg etc for vapour generation studies
Various safety interlocks like burner head, gas pressure, nebulizer, drain full condition etc. should be intergrated inside the system.
In future the system should bew upgradeable to graphite furnace with Auto dilution accuracy, and flame Auto sampler etc.
Hydride generator should be supplied and quoted 2 year AMC after compilation of warranty must be quoted The following indigenous items should be quoted I) Acetylene filled gas cylinder with double stage Gas regulator II) Nitrous oxide Gas filled cylinder with Double stage gas regulator III) Argon filled Gas cylinder with Double stage Gas Regulator IV) Stainless Steel Hood with exhaust fan including necessary fittings &
ducting facility V) 2 KVA Branded online UPS with 30 min. back up VI) Suitable branded PC & laser printer VII) Suitable 2 ton split Air condition Machine
46,000
Page 12
73. High Speed Refrigerated Centrifuge
Along with voltage stabilizer Maximum RPM : 20000 Temperature range :-8 to 400C Rotor Complete with Polypropylene Tubes (Capacity 6 x 50 ML) Type :
Angular, plastic container Maximum RCF (G): 37000 W×D×H : 890 x 627 x 575 Along with voltage stabilizer Maximum tube size : 100 ml Equipped with autotimer
3,800
74. Vaccum Oven Temperature range 4-300oCAutomatic thermostatTemperature control
600
75. Vaccum pump Moisture trap and vaccum regulator 50076. Magnetic Stirrer (2) Digital magnetic stirrer hot plate with temperature sensor
Max temperature 2000CMaximum RPM : 3000
1,000
77. N2 gas cylinder with pressure control (4)
Capacity 7 m3
Stainless steel body along with regulator double gauge and pressure control2,000
78. Dispenser Upto 50 ml volume 50079. Mixer-grinder Capacity upto 100 g wt Nil80. Vacuum desiccators Desiccation in vacuum 30081. BOD incubator cum
shakerChamber size 600x600x600 mmShaking tray size 500 x 500 x 500 mm for holding 25 nos of 100 ml and 16 nos of 250 ml Erlenmeyer flasks with stainless steel lotus clampsThe shaking motor with variable speed control system with shaking amplitude of 25 mmSpeed range 50-200 orbits/minuteTemperature range 5-600C with an accuracy of +/- 1 0CThe base of the incubator should be fitted with DC driven motor for orbital shakingDigital display
2,000
82. Refrigerator Tripple door 330 liters 1,00083. Deep freezer
(-200C)Hard top chest freezerChamber size 500x450x900 mm Capacity 170 ltr.
6,000
84. Precision drier 900 x 900 x 1200 mm 1,00085. ION/pH meter
(with ion selective electrode)
Ions measuring (Fluoride electrode) CMC function for ISE (Ion Selective Electrode) and pH visualizers the
ideal measuring range. Graphic display with text menu of convenient handling. Blank value correction, increment methods. Automatic calibration.
300
86. TDR (Time Domain Refractrometer) With quotation for additional access tubes
Several mutiplexer Operating system : Window Probe length upto 30 cm Output may be stored Power : DC/AC Test Pulse width : 2 ns and 10 ns Temperature operating upto 550 C Water resistance operating
8,000
87. Rotary evaporimeter Rotary evaporimeters Heating bath of capacity 3-4 liters vertical glasswares 1-2 liters space vaccum gauge.
900
Page 13
88. Green House Gas (GHG) Gas Chromatography
Fully Microprocessor Controlled Gas Chromatograph with all accessories
Complete electronic (or manual) flow control for injectors (including split flow) and detectors. Up to 3 injectors and 4 detectors including Mass Spectroscopy (MS)
Column oven temperature programmable from ambient to 450°C. PWOC Packed/Wide-bore On-Column Injector Flame Ionization Detector (FID): Detectivity: 2 pg C/sec Thermal Conductivity Detector (TCD): Detectivity: 300 pg/mL
Butane Electron Capture Detector (ECD): Detectivity: 7 fg/sec Lindane Data Acquisition Software GC Power cord, GC Installation Kit, Hydrogen gas cylinder,
Nitrogen gas cylinder, Zero Air gas cylinder, Gas Purification Panel of same brand and Calibration Gas Cans must be included
Branded PC & Printer, 5 KVA Voltage Stabilizer and split air condition System of 2 ton capacity must be included
60,000
89. Poly Pro Access Tubes for AQUA-PRO Soil Moisture Sensor
Access tube : Precision Radio Frequency stable access tubes for use with Aqua Pro Soil moisture sensor
Dimensions: Approximately 1 meter (39 in.) long by 2.5 cm (1 in.) Material : Specially Formulated, clear polycarbonate. Cap: Rain and sprinkler protection with specific design for humidity
control. Tube Ends : Bottom sealed. Top has a Cap to keep rain or irrigation
water out.
7,000(For 100 pc.
tubes)
90. SPSS 20.1 (Software) Product Description Model part number IBM SPSS Statistics Base 21.0 D0FMALL IBM SPSS Advanced Statistics D0FRKLL IBM SPSS Missing Values D0FOULL IBM SPSS Regression D0FPCLL IBM SPSS Forecasting D0FQ5LL IBM SPSS Neural Networks D0FO3LL IBM SPSS Bootstrapping D0FRRLL
9,000
91. Stabilizer (3 KVA)
Auto manual voltage stabilizer with voltmeter, input (auto) 130-280 volt, input (manual) 50-300 volt, output 190-240 volt, +/- 2% maximum current 14 Ampier.
300
92. Stabilizer (6 KVA)
Auto manual voltage stabilizer with voltmeter, input (auto) 130-280 volt, input (manual) 50-300 volt, output 190-240 volt, +/- 2% maximum current 14 Ampier.
400
93. Mini spin variable speed microcentrifuge
13400 rpm, volt – 240, frequency 50 hz.1. Variable speed – upto 13400 rpm2. Digital display3. Timer and quick spin button4. Automatic lid release12-place microcentrifuge sares bench-top space while providing powerful
variable speed centrifugation upto 12110 x gQuick deceleration and acceleration of less than 15 second12-place roter for 1.5
600
94. Electrophoresis unit with power pack
Complete horizontal electrophoresis system. Combined power supply and tank with casting accessories. Combined detachable power supply and gel tank. Full function power supply set voltage and amperage upto 150 volt/400 mA.
1,600
95. Deep freezer (-80ºC) horizontal
Operating temperature range -45 to -860C. Temp. controlled microprocessor display, Minimum 2 lines 16 character LCD, Power failure alarm, internal
20,000
Page 14
body material stainless steel 304 grade, electrical 220-240 volts, internal volume 350-706 litre.
96. Autoclave (Horizontal) 750mm x 550mm 30” x 22
Double Walled, Stainless Steel, Radial Locking System with Pressure gauge, safety device Pressure 22 p.s.i. Automatic Vacuum Breaker, dimension: 750mm x 550mm 30” x 22 capacity – 152 L
8,800
97. Digital platform weighing scale
Capacity – 150 KgAccuracy – 20 KgPlatter size – 600x600 mm, LED display, Inbuilt rechargeable battery, Stainless steel
500
98. Automated stereo microscope with camera attachment and camera lucida
MicroscopesObservation methods:
ADVANCE STEREOZOOM RESARCH MICROSCOPE WITH DIGITAL IMAGE ANALYSIS SYSTEMZOOM RATIO 18:1 OR MORETOTAL MAGNIFICATION 7.5X – 270X (WITH 10X EYEPIECE) EYEPIECE TUBE TRINOCULAR.EYEPIECES 10X (F.N. 22) WITH
DIOPTER ADJUSTMENT ON BOTH THE EYES.
ZOOM RANGE 0.75X-13.25X OR MOREOBJECTIVES SUPER HIGH RESOLUTION PLAN APO 1X
SUPER HIGH RESOLUTION PLAN APO 2X
STAND SLIM L.E.D. TRANSMITTED STAND.APERTURE DIAPHRAGM SHOULD HAVE BUILT-IN APERTURE DIAPHRAGM SO THAT PHOTOMICROGRAPHY OPTIMUM DEPTH OF FOCUS CAN ALSO BE ACHIEVED BY ADJUSTING THIS DIAPHRAGM.
MINIMAM WORKING DISTANCE 60 MM OR MORE WITH 1X & 20MM WITH 2X OBJECTIVES.
EPISCOPIC ILLUMINATION LED RING ILLUMINATION TO BE ATTACHED WITH THE OBJECTIVES.
NOSEPIECE NOSEPIECE TO ACCOMODATE BOTH THE OBJECTIVES AT A TIME.
Option IIDIGITAL CAMERA SYSTEM DIGITAL CAMERA CAPABLE
OF HANDLING LOW LIGHT IMAGES WITH 2/3” HIGH
30,000
Page 15
DENSITY CCD CHIP, APPROX. 12 MILLION PIXEL RESOLUTION.
CAMERA LUCIDA ATTACHEMENT FOR DRAWING DIAGRAMS
Option IIISoftware should be with following features: Image Acquisition, Time Lapse Imaging, Z-Stack, Annotation, Macro,
Report Generator facility, Measurement of different shapes, sizes, lengths and Angle measurement etc., Video recording.Should have option to get focused image of different focal point images of uneven surfaces
Branded computer for live image viewing and analysis with windows 7 O.S., 2 GB RAM, 500 GB HDD, PCI-E SLOT along with 600 VA UPS.NOTE: Microscope, Camera & Software should be from same manufacturer.
Simple polarized light
Brightfield Darkfield
Focus:Manually operated focusMotorized focusRevolving nosepiece
Stands:Standard stand
Observation tubes:Trinocular tubeTilting binocular tubeTilting trinocular tube
99. Weighing balance (2 digit after decimal II)Capacity: 300 g; Accuracy: 0.01 g
1,400
100. Water purification Unit (Double Stage II)
Borosilicate Glass; capacity: 4 LPH 4,000
101. Digital pH Meter: 3.5 digit LED display with auto temperature compensation, gel filled epoxy body combination, pH electrodes and RTD probe with recorder output and slope control facility
1,200
102. BOD Incubator: Temp. range 0°C ~ + 60°C; Temp. consistancy ± 0.1°C; Temp. uniformity ±1.5°C (at 37°C); Inside material SUS-304; Temp. control PID; Temp. sensor PT-100Ω; Temp. heat-up rate 25°C ~ 60°C (within 15 min); Temp. cool-down rate 25°C ~ 0°C (within 15 min); Heater: Incubator 1000W; Refrigerator 1/3 HP; Safety devices Short circuit breaker, overheat protector refrigerator overload protector, sensor abnormality, over low protector; Inside dimensions (mm) W700 x D580 x H1200; Outside dimensions (mm) W790xD860xH1770(with casters); Volume (liters) 487Shelf 5; Power supply 110/220V (12A); Weight 220kg
5,000
103. Digital Refractometer: 0 – 850B, Battery operated, suitable for fruit and vegetable, the dual level LCD measurement and temp. Make – Hanna Instrument; Model – HI 96801
900
104. Circulating Water Bath:
Coolant Reservoir Capacity 33 Ltrs. 2,000
Page 16
105. Automated Vortexing System
500
106. Magnetic Stirrer (With Hot Plate):
2 MLH 500
107. UV-Vis Spectrophotometer
Optical system: Double beam; Wavelength range:190 to 1,100nm; Spectral bandpass:1.5nm; Display: colour LCD with backlight (26.4cm); Printer I/F: Centronics interfaceSerial I/F RS-232C (exclusive for UV Solutions program)Size (main unit): 500 (W) × 605 (D) × 283 (H)mm (with LCD lowered) or 500 (W) × 605 (D) × 241 (H)mm (without PC and printer); Weight (main unit): 31kg or 29kg; Power supply: 100, 115, 220, 230 or 240V, 50/60Hz; Power consumption: 300VA
12,000
108. Max.–Min. Thermometer
00 to 1000 C Nil
109. Hygrometer Digital Max.-Min. memory for temp. & humidity; Imported 300110. Muffel furnace Dimensions (mm) 300 x 200 x 200; Temperature 1350 0C or more, accuracy
±2 0C; Temperature control through microprocessor based PID controller with minimum 30 steps; Furnace insulation ceramic wool; Temperature settings and display digital and double digital; Power source 220V; 50 Hz single phase
4,000
111. Hot Plate 7.5” x 7.5” (191 mm x 191 mm) chemical-resistant, ceramic-coated, stainless steel tops; Rugged die cast luminium body with small footprint 8W x 9D x 4.5”H (203 mm x 229 mm x 114 mm)Speed range for stirring models 60 to 1500 rpm; Temperature range for heating models: from ambient +5°C to 380°C
Nil
112. Silica criscibel The purity of silica obtained is as high as 99.8%. Products confirms to BS Standards; SofteningTemp:1700’C; AnnealingTemp:1150’C ; WorkingTemp:1900-2000’C; Operating temp: 1050’C Continuous & 1350’C Intermittent
Nil
113. Desiccator 430 mm overall height; 285 mm disc diameter; Body I.D. 300 mm Nil114. Crucible Tongue Nil115. Heating assembly Stainless Steel body
7500C good corrosion resistance250
116. Kjeldahl Distillation Assembly
Six-Place Open Combination Kjeldahl Digestion/Distillation Unit with Blower ExhaustUnit. 44” wide x 17” deep x 79” high. Frame shall be constructed of epoxy-coated tubular steel. Heaters. Unit shall include twelve 600-watt heaters, 6 for digestion, 6 for distillation. Heaters shall be operated by 12 individual infinite-control knobs with variable input from 20-100% capacity. Distillation Manifold. Unit shall be equipped with 6 seamless stainless steel tubes and cooling water temperature gauge. Inlet and outlet water connections shall be 3/4” NPT and supply line shall be 1/2” ID minimum. Six connecting bulbs and 6 delivery tubes for distillation process shall be provided. Fume Manifold. Unit shall include a fume manifold of chlorinated polyvinyl chloride (CPVC) fitted with six Teflon nipples. Blower Exhaust. Unit shall include a 1/3 hp blower exhaust system for fume removal, located on left end of unit. Blower exhaust connection shall be sized for use with 6” nominal (6 5/8 OD) vent duct. A 6" PVC pipe and flexible coupling with clamps shall be provided. Blower exhaust outlet shall be mounted 55 1/2" from the floor. Electrical. Unit shall be completely assembled and factory wired to a main circuit breaker panel to specified AC electrical code.
200
117. Penetrometer Of Fruit/ Fruit Sclerometer
Range: 0.2 – 4 kg (x105 pa)Resolution: ± 0.1Precision: ± 0.5Insertion Depth: 10 mm
500
Page 17
Weight: 0.3 kg 118. Penetrometer Of
Fruit/ Fruit Sclerometer
Range : 0.5-15 kg (x105 pa)Resolution: ± 0.1 - ± 0.2Precision: ± 0.3 - ± 0.5Insertion Depth: 10 mm Weight: 0.3 kg
500
119. Digital Vernier Calipers
Nil
120. Manual slide calipers 0-150 mm Nil121. Digital Slide Calipers 0-150 mm Nil122. Compound
MicroscopePrecise graduated slow motion reading to .002mm, Eyepieces WF10x and 15x (Two nos.)Objectives 10x, 45x (SL), 100x (SL) oil immersion
2,000
123. Digital Weighing balance up to 600g
Capacity 600 g; Readability 0.1 g; Pan size 120 mm x 120 mm 200
124. Digital Weighing balance up to 1 Kg
Capacity 1000 g; Readability 0.5 g; Pan size 217 mm x 168 mm Nil
125. Digital Weighing balance up to 2Kg
Capacity 2000 g; Readability 1.0 g; Pan size 217 mm x 168 mm Nil
126. Digital Weighing balance up to 5Kg
Capacity 5000g; Readability 2.0g; Pan size 217 mm x 168 mm Nil
127. Cool Chamber Size (W×D×H): 12ft. × 14ft. × 12ft. Shelves size: 4.2’ x 18” shelve to shelve distance: 15” No. Of lights: 6 Nos. Light provided at inside roof : surface Temperature range: 0°C to 25°CAccuracy: ± 1°C
12,000
128. Texture AnalyserFood Material
Force range- 2500N, Force resolution- 0.015%, Speed range-1-1000mm/min, Speed accuracy- ±1%, range setting-1-295mmWith different probes to assess firmness, shear test, consistency, compression, shearing, snapping
28,000
129. Vacuum Tray dryer Tray- 8-10, Max Temp. 100°C, Heating Load- 8-10 KW, vacuum capacity of pump- 70-80 M3 / MR.
8,000
130. Freeze dryer for fruit/ vegetable
Temperature: -55°CVacuum degree: <10 PaFreeze-dry acreage: 0.07-0.12 sq. mWater-Capture Capability : 3-4Kg/24hCapacity : 5 LiterSize: 580×560×340(mm)Freeze dry time: About 24h(material thickness 10 mm)
12,000
131. Viscometer(Brook’s field)
Min Viscosity range 15 Cp, Maxim- 20 Lac CpsSpeed- 0.3-100rpm, accuracy- ±1.0% of range, Repeatablity- ±0.2%
6,000
132. Chips making line(Potato slicer,Potato peeler, fryer)
Slicer: Capacity 40-60 kgs/hr with nut and bolt arrangement for locking of blades and top 4 different blades.Peeler: Cap. 5kg. with 0.5Hp motor
3,000
133. Pet bottle blower machine/ Plastic bottle making machine
Capable to prepare different sized bottle 2,000
134. CO2/O2 ANALYSER With inbuilt data logger, O2 sensor- range- 0-25%, sensing method-ZrO2, Sampling method- sample draw 30ml/min, response time- 4 sec, sentivity-±20ppm ±1%, pressure range- 500mbar to 3000mbarCO2 sensor- CO2 sensor- range- 0-100%, sensing type- NDIR, Sampling method- sample draw 300ml/min, Accuracy±0.2% vol CO2±3% measured value, sensor life expectancy >15yrs sentivity-±20ppm ±1%, pressure range- 500mbar to 3000mbar
12,000
135. Crown corking For 200 mL to 1 ltr Sized bottles 1,000
Page 18
machine Cap. 8-12 bottles/min.136. PP Cap sealing
machine-- 1,000
137. Hot filling tank (for beverage)
Lab scale tank with stirrer and juice filling outlet, Capacity- max. 30 Litter 600
138. Microwave oven (Lab scale)
-- 600
139. Planetary Dough Mixer
Capacity: 8 to 10 Kg with three blade i.e spiral, leaf, etc. Electrically Operated, Attached with speed regulator, Better efficiency.Manufactured using high-grade raw material.Complete with S.S. removable bowl, S.S. blade having variable 3 different speeds and one neutral speed suitable.Easy operation and running is noiseless.Resistance to corrosion.
1,000
140. Extruder(Co rotating twin screw)
Gravity Feed Hopper of Raw Materials.Quiet Direct Drive Speed Control of the Feed Screw via the InverterMotors are efficient Inverter Duty Inverter Supplied with ExtruderManual Head Gap Controlled by Mechanical Ratchet.Construction: Painted Mild Steel. Stainless Steel Belt Guard. Stainless Steel Hopper. Stainless Steel Guard at Product Discharge.Die Plate: Bronze, & Screw: Die Steel. A.C. Motor : 10 HP (Make: Siemens / ABB/ BBL) Gear Motor: 3 HP (Make: P B E G Ltd) Electrical Control panel: A C Drive of 3 HP (Make: Danfoss / BCH / ABB) , Production Capacity: (08-15 kg / hour)
30,000
141. Double Deck Bakery Oven
High quality Double Deck Baking Oven.Suitable for all Kind of baking i.e. bread, pastries and cookies etc.Available in gas or Electric operated mode.Heavy M. S. interior, S. S. front and heavy legs.Mineral wool insulation.Independent settings to heat top and bottom of each deck separately.
6,000
142. Bread Slicer Bread Cutting Width size: 11MMSuitable for Bread / Cake / Rusk slicingNoiseless and vibration free operationsSolid and strong body constructionEasily replaceable bladesStainless steel parts which are directly in contact with the product
1,500
143. Dough Sheeter High quality and good performance and well designed.Various thickness adjustment and final thickness can be fixed.Consistent performance.Maintenance free reliability.Safety & durability.Ease of use
600
144. Proofing Chamber Vacuum Glass system, RH and Temperature Nob 2,000145. Fry Dump Dimension: 450 x 460 x 310 500146. Four door refrigerator Good Quality compressor.
Self defrost system.Digital temperature displayer and controller.High cooling efficiency, energy-saving.Specially designed structure, ensuring even temperature.Entirely SS 304 construction.
1,500
147. Automatic Fibre Estimation System
No. of Sample Test a time: 6Sample Size: 0.1 to 4 gmsHeater Source: Ceramic infrared Heater with reflectorsIndependent Sample loading with individual mechanical controls
5,000
Page 19
Extractor: Marked Borosilicate extraction vessel with borosilicate reflex condenserCrucible: Sintered silica glass cruciblePore Size: P1 Porosity discVacuum Source: Fibra Flow system with self priming pump connected to gaint water suction filter pump for rapid filtrationsPressure Pump: Electrically operated air pump for decloggingControl valve: Individual Control valves for vacuum and reverse air steamTemperature Controller: Micro Processor based digital temp. controllerTemperature range: Ambient to 500°C (Continuously variable)Temp. Accuracy: ±1°CPre heating fro acid/alkali: Fibrastat hot place casted aluminum alloy heater with thermostatic ControlDirect reagent addition: Direct to extractor from topHeater Wattage: 2500WIndividual high temperature resistant adapter for intact leak proof sealNumber of operation per crucible: 15Safety Features: Auto over temperature protection, auto sensor break protection, auto error indicator, etc.Electrical requirement: 220V 50HZ AC MainCold Extraction System (Optional)
148. Tablet making machine
With single punch automatic compression and injection device. Automatic feeding and removal of tablets. Automatic Tablet Making Machine made up of heavy cast body and centric pressure system with steel hopper.
2,000
149. Portable Ethylene gas analyser
Air sampling rate 0.4-0.8 liters/minNominal Range 0-100 ppm, Accuracy ± 5% adjusted for temperature and humidity, Operating Environment5°C - 45°C (10-90% humidity non-condensing)
8,000
150. Microwave Digestion System
Installed microwave power : 1800W. The maximum microwave output power : not less than 1000W, the
operating power realizes automatic variable frequency control (VFC) and non-pulsed continuous microwave heating via reaction, temperature and pressure feedback.
Volume of the chamber : 65 litres. System builds in forced air cooling system with air exhaust volume of
3.1m3/min. Vessels are made up of TFM which should be automatically cooled
inside the cavity. Stainless steel cavity coated with multilayer PTFE (Teflon). Six layer intensified steel structure armored glass explosion proof
chamber door is equipped with an automatic pop-up buffer structure. Large, long life and high brightness LCD screen displays reaction
parameters and curve change in real time. Electronic & mechanical dual-control door lock is safe, reliable and
convenient. Buffer structure of automatic pop-up chamber door: Under abnormal
circumstance of the inside of the chamber, the door pop-up automatically to release high pressure gas from the opening, and then return automatically. As a result, the damage of high pressure gas to chamber structures and digestion vessel may be relieved.
Under full closed corrosion protection, this vessel can resist the erosion of any acid and alkali liquids and gases.
Fully closed anticorrosive super strength aerospace composite fiber outer vessel with Teflon coating has strong transverse impact
40,000
Page 20
resistibility and can’t crack or break upon explosion, superior to other high molecular engineering plastics.
You can store program in the system which can be modify as per need time to time.
Vessels is also superior to other high molecular materials in dielectric property, has good microwave penetrating property and heat conductivity, and is able to heat and cool quickly.
Applying the patented vertical explosion pressure relief structure and fiber materials vessel, this workstation can limit bursting force within the design range, prevent any damage of transversal crack of digestion vessel to the instrument or the operating personnel, realizes the effect of vertical explosion, and greatly improves the operation safety.
Rotor vessels are 6 in number. Volume of the vessel is 100 ml. Maximum sustained pressure is 0 -10MPa (100bar/1500psi). Pressure accuracy is +/- 0.1MPa Highest sustainable temperature is 300°C. Temperature accuracy is +/- 1°C. Linear materials for inner vessel are made up of TFM. The rotor vessel has piezoelectric crystal pressure sensor to measure
the pressure and anti-explosion mechanism to control pressure in all vessels.
The system has immersing Pt temperature probe to measure temperature.
The systems have a protection shield around the reaction vessels to ensure safety even in the event of spontaneous chemical reaction.
151. Texture Analyser PC controlled Texture analyzer to measure the textural properties of foods and food products like Grains, bakery, confectionary, fruit and vegetable products, Meat , Dairy products etc.
1. Load /Force Range: 250 Kg (2500N).2. Standard Load Cell 1000N3. Additional Load cells:
(OPTIONAL)2,5,10,25,50,100,250,500,1000,2500N4. Force Resolution: 0.015%5. Force Accuracy: Better than 0.017%6. Speed Range: 1- 1000mm/min.(0.04 – 40in/min)7.8. Speed accuracy at 5mm/s: +/-0.01%9. Position Accuracy: better than +/- 0.1% of set speed10. Data Acquisition Rate: 16000 readings/sec11. Operating Temperature: 0-50°C12. Net Weight: 18 kg13. PC Interface: Standard RS 232 serial port14. Power supply: 100-250 VAC 50-60 Hz15. Firmware updates: FLASH update of firmware via PC16. Test Modes: The system must able to perform various
test modes viz. Single cycle, Multiple cycle, Hold until time,
Fracturability, Tensile, Adhesiveness.
RECOMMENDED GENERAL PROBE KITCYLINDERS: 38.1mm ; 25.4mm ; 12.7mm BS ; 10mm ; 6mm ; 2mm CONES: 90 degree ; 60 degree ; 45 degree ; 30 degree BALLS: 25.4mm (432-088); 12.7mm (432-089)MISC: 2mm Needle ; Perspex Knife Edge
12,000
Page 21
System supplied with Power supply cable, Serial cable, Operating Software ,USB Computer Cables, Heavy Duty Stand, PC/Laptop with DeskJet color printer.
152. NIR Spectra Analyzer Parameters that can be monitered are:
1. MOISTURE 2. PROTEIN 3.SUGAR 4.ALCHOHOL 5.IODINE NO 6.OIL CONTENT FAT 8. CRUDE FIBRE 9. STARCH 10.ACID NO 11. HYDROXIL NO 12. COLLAGEN 13.VITAMINS And many many more…..NO OF FILTERS --- 19.2. MEASUREMENT TIME -- APPROX 25 SEC ( 1 Scan , 19 Filters )3. Spectral Range - 1445 – 2348 nm. ( Sample / Ref Measurement for each Filter )4. Display - 240 x 128 Pixels. LCD5. Spectral Bandwidth --- 10nm +/- 2nm6. Control -- Central Operation Button. 6. Signal to Noise Ratio --- > 10,000 : 17. Product Database ---- 99 Products with 15 Properties Each8. Detector --- Lead Sulphide ( PbS )9 External Interface ---- 1 Serial USB Interface, Bluetooth, I Serial RS 232 , 1 No 10/100 Ethernet for LAN.10. Power --- 90 – 260 V AC / 50/60 Hz.11. Weight -- 20Kgs.15. Temperature - 5 – 40 Deg C. Rotating Cup Drawer Assembly.Sample Drawer for Presentation of Coarse samples ( Rice, Wheat, Pulses, Soya, etc ) rotating cup aluminum, Rotating cup drawer with integrated control electronics.Accessories: 3 x Rotating Cup , sample cup ( aluminum ) for rotating cup drawer for sample presentation of coarse samples.Viscous Cup ( VISCOUS SAMPLES) VARIABLE PATHLENGTH.with reflector, pathlengh 200 - 800 μm adjustable
SOFTWARES: : - software platform for chemometric applications in Spectroscopy! for versatile routine application in daily analytical measurements, at-line or in the laboratory. Including multi-linearregression calibration functions, database, on-line prediction under protocol functions.
60,000
153. Portable thermometer to measure air and soil temperature
Portable thermometer with following specification:Accuracy: ±0.02°C over full rangeResolution: 0.01 °CRange: -200°C to +850°CStability: <0.005°C per yearDisplay in °C, °F ohmsStatistical functions: Average, Min/Max and Standard Deviation
500
154. Digital Thermometer with probe
Range: -50 to 300 C Unit: C/F change-able Resolution: 0.1 C Accuracy: 1 C Temperature sensing time: 1 s
500
Page 22
Probe with 4 m cable Probe length: 150 mm Data-hold function Power-supply: battery or power operated Auto shut-off: 15 minutes Low battery indicator
155. Thermo hygrometer Thermometer, hygrometer is designed for direct measurement of temperature, relative humidity for compressed air up to 25 bars with 1m cable. Audio and optical alarm of measured values. Memory of minimum and maximum measured values. Function Hold - manual storing of actual values for later displaying.Product Type pH Meter
Meter style Portable
Range (pH) 0.00 to 14.00
Range (Temperature °C) 0 to 100
Range (Temperature °F) 32 to 212
Resolution (pH) 0.1/0.01
Resolution (Temperature) 0.1
Accuracy (pH) ±0.01 pH
Accuracy (Temperature) ±0.1°C
Temperature compensation Automatic or manual
Display LCD
Interface RS-232
Calibration Up to 3 points
Waterproof Yes
Power Two AA batteries (included)
Data logging (points) 300
CE Compliance Yes
500
156. Portable digital refractometer:
easurement Range Brix 0.0 to 45.0% Minimum
Iindication Brix 0.1%
Measurement Accuracy Brix ± 0.1%
Measurement Temperature
5 to 40°C (Automatic Temperature Compensation )
Ambient Temperature 5 to 40°C Power
Supply006P dry battery ( 9V )
300
157. Portable pH Meter Resolution: 0.1pH Accuracy(@20C/68F): 0.1 pH Calibration: manual, 1 or 2 point Battery operated
300
158. Refractometer Range: 0-85% brix, 0-80 C temp Resolution: 0.1% brix, 0.1 C Accuracy: 0.2% brix, 0.3 C Temperarure compensation: auto, 10-40 C Sampling time: 1.5 seconds Auto off
200
Page 23
Battery operated.159. Conductivity Meter Range: 0-1990 uS/cm
Resolution: 0.1 uS/cm Accuracy: 1% Temperature compensation: 0-50 C Battery operated
500
160. 2 Ton Split air conditioner
A 2TR (6000 Kcal/hr) capacity with rotary compressor A internally grove condenser coil with fan and fan motor Thermostatic Expansion valve Evaporator coil Capillary tube with blower and blower motor cordless remote control Refrigerant Flow Meter Compound &Pressure gauge for LP & HP measurement LP-HP cut-out Energy meters, digital volt meter, ammeter and temperature indicators Heating coils with electronic dimmers Strainer thermometers for measuring inlet & outlet air in evaporation (RH) A solenoid valve & hand shut off valve for operating the two expansion
system Equipment mounted on fabricated stand
800
161. 2 Ton window air conditioner
A 2TR (6000 Kcal/hr) capacity with rotary compressor grove condenser coil and evaporator coil
A fan cooled condenser and Evaporator of equipment capacity Thermostatic Expansion valve Capillary tube with cordless remote control Refrigerant Flow Meter Compound &Pressure gauge for LP & HP measurement LP-HP cut-out Energy meters, digital volt meter, ammeter and temperature indicators Heating coils with electronic dimmers Wet & Dry bulb thermometers for measuring inlet & outlet air in
evaporation (RH) A solenoid valve & hand shut off valve for operating the two expansion
system Equipment mounted on fabricated stand
800
162. 200 lit Refrigerator Control Panel Stand Alone Metallic powder coated panel Compressor Hermetically Sealed, Rotary type for 200 lit with
Thermostat Condenser An air cooled condenser of suitable Capacity with Fan Expansion System Capillary Expansion Thermostatic Expansion system with solenoid valve Evaporator An air cooled Evaporator Coil of suitable Capacity Refrigerant Freon R134 Voltmeter Ammeter Digital voltmeter of range 0-300V AC, 0-20A AC Energy meter Energy meter 5-10 Amps Temperature Indicator Digital Temperature Indicator ,-50 to 150°C with
TSS Thermocouples Teflon coated Cr –Al (K-type)-5 no. Gauges Pressure and Compound gauges for HP and LP with HP-LP cut-
out Stop Watch Digital, 1/10 of a second Experimental Capability Actual, theoretical COP
500
163. Forced cooling tower with Cross flow heat
Box shaped structure enclosed with fan ( 800mm X 800mm X 1700mm) Spray header
4,000
Page 24
exchanger Spray nozzles Eliminator Temperature sensors Pump ( 1 HP) Pressure sensors with peripheral device (AC) PDC unit with appropriate data analyzer Minimum 5 Ton Cooling tower capacity
164. Natural cooling tower Box shaped structure with louvers ( 1200mm X 1200mm X 2100mm) made of steel
Spray header Spray nozzle Temperature sensors Pump (1.5 HP) Minimum 5Ton Cooling tower capacity
3,000
165. Solar refrigeration unit
Compressor: Hermetic 0.5 HP, 220V single phase, 50/60 Hz Condenser: Air cooled with electric fan Evaporator: air cooled with electric fan Expansion valve: thermostatic expansion valve Pressure gauges: LP and HP gauges with differential pressure switch Filter liquid separator and slight glass Thermometer: digital Refrigerant : R134a Solar panel with Ups backup Refrigeration components mounted on a sturdy table with a vertical
perforated steel plate and connected by copper pipes to form a refrigeration circuit of industrial type.
Four Solar Refrigeration panels of 500 Watts each. The UPS system should be of 2.2KVA capacity with four batteries and each battery is 150AH with 12 volts . The backup power should be of at least one and half hour
5,000
166. Refrigeration Tutor Model
Extensive Range ExperimentsFully Instrumented For Study Of Vapour Compression Refrigeration CycleWell-calibrated Sensors, Indicators And GaugesCompact, Sleek And With Silent OperationComprehensive Teaching ManualEcho Friendly Refrigerant- Freon-134aTotal Instrumentation Mounted On A Portable Trolley, Made Of Ms Square Tubes Duly Powder Coated. A Hermetically Sealed Compressor Of 1/3rd Hp Capacity (Tecumseh Or Kirloskar Or Equivalent )A Fan Cooled Condenser Of Equipment Cap.An Evaporator Coil Is Placed Inside The Frp Coated Ss Vessel (Chiller)Thermostatic Expansion Valve & Capillary SystemRefrigerant Flow Meter (Euraka Or Equivalent )Compound &Pressure Gauge For Lp & Hp MeasurementLp-hp CutoutEnergy Meter, Digital Volt Meter, Ammeter And Temperature IndicatorsA Solenoid Valves For Operating The Two Expansion System
2,500
167. Ice Plant Tutor Model (50 Kg Of Ice In 24 Hrs, In Blocks
Hermetically Sealed Compressor: 1/2 Hp Cap.Air Cooled Condenser : 1/2hp, 12” X 13” X 2 RowsFan Motor With Blade: 1/35 HpExpansion Device : Thermostatic Expansion Valve(10 To -40 Degc)Rotameter: 0.6 To 62 Lph (Eureka)Filter Drier: Dm-50(Dan Foss)Energy Meter : 2.5 – 5 Amps
3,000
Page 25
Solenoid Valve : ¼” FlareThermostat : For Compressor Control (U 50- 1018)Pressure/Compound Gauges: For Hp-lp Measurement.Digital Temperature Indicator : 50 To + 150°cThermocouples(5 No.) : K Type (Cr/Al)Lp/Hp Cutout : Mp15 (Dan Foss)Refrigerant: R-134aBrine Tank:762*690*610 Mm(Mild Steel)Ice Cans : 50*200*325 Mm-10 No.(Galvanized Iron)Brine Solution : Calcium Chloride (50kg)Insulation For Brine Tank: Bitumen & Thermo Cole @Outside(50mm)Fiber Coat @ Inside (3mm)The Apparatus Is A Laboratory Scale Working Model Of A Refrigeration Cycle Unit, Portable–trolley Mounted Duly Powder Coated, Housed On A Ms Angles With Formica Coated Wooden Ice Cabin & Control Panel To Give Elegant Finish. The Compressor Is Fitted @ The Rear End Of The Platform With Fan Cooled Condenser. The Evaporator Coil Made Of Copper Pipe Of 3/8” Diameter And About 80 Feet Long Is Coiled And Placed In The Brine Tank Which Is Insulated With Fiber Coat Inside, Bitumen And Thermo Cole Coat @ Outside With A Thickness Of 50 Mm For Proper Heat Insulation.
168. Air Conditioner Trainer- Duct Type 1 Ton Capacity
Extensive Range ExperimentsFully Instrumented For Study Of Air Conditioning EffectWell Calibrated Sensors, Indicators And GaugesCompact, Sleek And With Silent OperationComprehensive Teaching ManualEcho Friendly Refrigerant- Freon-22Duct Type Laboratory Model With Total Instrumentation Mounted On A Portable Trolley, Made Of Ms Square Tubes Duly Powder Coated. A Hermetically Sealed Compressor Of 1tr Capacity (Tecumseh Or Kirloskar Or Equivalent )A Fan Cooled Condenser And Evaporator Of Equipment Cap.Thermostatic Expansion Valve & Capillary SystemRefrigerant Flow Meter (Eureka Rotameter)Compound &Pressure Gauge For Lp & Hp MeasurementLp-hp CutoutEnergy Meters, Digital Volt Meter, Ammeter And Temperature IndivatorsFinned Air Heaters For Heating & De-humidification With Electronic DimmersWet & Dry Bulb Thermometers For Measuring Inlet & Outlet Air In Evaporation (Rh)A Solenoid Valve & Hand Shut Off Valve For Operating The Two Expansion SystemA Boiler Of 1kw Capacity For Producing Steam For Humidification Process
1,500
169. Experimental cold storage Trainer
Portable–trolley Mounted, Housed On A Ms Square Tube Frame With Powder–coated Metallic Platform To Give Elegant Finish. The Compressor Is Fitted On The Platform With Fan-cooled Condenser. The Cold Room/Freezer - Made Of Stainless Steel Enclosure, Well Insulated With Bitumen And Thermo Cole, Coiled With Copper Tube Housed In An Ms Chamber. The Rotameter, Thermostat Expansion Valve, Solenoid Valve, Pressure/Compound Gauge, Lp/Hp Cutout, And Voltmeter, Ammeter & Temperature Indicator With Selector Switch (To Measure Temperature At Different Points Of The Refrigeration System) Are Mounted On The Panel.Hermetically sealed compressor – 1/3rd HP cap.Air Cooled condenser –1/3HP, size: 12” x 13” x 2 rows
5,000
Page 26
Fan motor with blade, 1/83 HPExpansion Device –Capillary & Thermostatic Expansion valveRotameter-6.2 to 62 lph (Eureka)Hand shut off valves-1/4” & 3/8”Filter DrierEnergy meter: 2.5 – 5 ampsSolenoid ValveThermostatPressure/compound gauges and LP/HP cutoutDigital Voltmeter 0-300° V ACDigital Ammeter 0 - 5A ACDigital Temperature Indicator - 50 to + 150°CThermocouples – k type (Cr/Al)
170. Water Cooler Test Rig All the components are mounted on rigid steel frame. The trainer consists of a hermetically sealed compressor, forced convection air-cooled condenser, filter / drier, flow meter, expansion device and coil wound type evaporator. Separate pressure gauges are provided to record suction and discharge pressures and digital temperature indicators for various temperatures. The refrigerant used is R-134 a which is environment friendly.REFRIGERATION SYSTEMCapacity: 0.30 TR @Rated test conditionsCompressor: Hermetically sealed. Make :Emerson Climate Tech./ Tecumseh Products India Ltd./ Danfoss Ltd./or any equivalent make.Condenser: Forced convection air cooled.Condenser fan: Axial flow.Evaporator: Provided.Expansion device: Capillary Tube.Accumulator: Forced convection air cooled.Insulation: Axial Flow TypeRefrigerant: 1000 Watts; Finned Type.CONTROLS & INDICATIONSProvided for Temperature and Pressure6 Channel facility with digital display.2 Nos.; Dial type pressure gauges.Glass tube Rotameter provided.DBT & WBT measurement by sling psychrometer.
4,000
171. Two cyllinder four stroke diesel engine test rig
(14HP, 1800 RPM 4 Stroke Water cooled) with rope brake dynamometer and Standard Accessories like (i) Fuel Measurement consumption by Volumetric method (ii) Air Consumption using standard orifice & MS Air box (iii) Digital RPM meter (Except Mechanical loading) (iv)Digital temperature gauges (Air IN, Exhaust OUT, Cooling Water IN, Cooling Water OUT) (v) Water flow Measurement through Rotor meter 2400 LPH
1,600
172. Four stroke single cylinder vcr engine test rig
(Varaible Compression Ratio engine, 5 HP, 1500 RPM, 4 Stroke Water cooled) with Hydraulic brake dynamometer and all Standard Accessories like (i) Fuel Measurement consumption by Volumetric method (ii) Air Consumption using standard orifice & MS Air box (iii) Digital RPM meter (Except Mechanical loading) (iv) Digital temperature gauges (Air IN, Exhaust OUT, Cooling Water IN, Cooling Water OUT) (v) Water flow Measurement through Rotor meter 2400 LPH
1,600
173. Single cylinder 4 stroke diesel engine test rig
(5 HP, 1500 RPM, water cooled) with eddy current dynamometer and all standard accessories like (i) Fuel Measurement consumption by Volumetric method (ii) Air Consumption using standard orifice & MS Air box (iii) Digital RPM meter (Except Mechanical loading) (iv) Digital Electronic torque controller for Eddy current dynamometer (v) Digital temperature gauges (Air IN, Exhaust OUT, Cooling Water IN, Cooling Water OUT)(vi)
1,600
Page 27
Water flow Measurement through Rotor meter 2400 LPH174. Four stroke four
cylinder petrol engine test rig.
Engine: MPFI Engine (10HP, 1500rpm) With electrical Dynamometer and all standard accessories like(i) Fuel Measurement consumption by Volumetric method (ii) Air Consumption using standard orifice & MS Air box (iii) Digital RPM meter (Except Mechanical loading) (iv) Digital temperature gauges (Air IN, Exhaust OUT, Cooling Water IN, Cooling Water OUT) (v) Water flow Measurement through Rotor meter 2400 LPH
3,000
175. Cut sectional model of mock layout of a tractor wiring (electrical system of a tractor) working model (diesel) with battery
This demonstration board should give a complete idea of the electrical system of a Tractor. In this demonstration board the actual wiring with parts and accessories of a Tractor arranged, according to the electrical circuit of a Tractor and terminals are provided to connect the battery. By giving connection the working of individual parts such as Self starter, Alternator, Horn, Head lights, Tail lamps, Parking lamps, Side indicators, Brake light, etc., can be demonstrated. The parts sectioned to show the internal constructional details.
2,000
176. Tractor transmission assly with gear box, rockshaft assembly
The model is made out of full size original used Tractor Transmission Assly with Gear Box Rockshaft Assembly Suitable sectioning of the transmission housing is done So as to demonstrate its complete operational principle/Details, coated with suitable painting and plating of the Hardware with suitable mounting option of entire model.
3,000
177. Cut section model of a tractor assembly with di engine assembly & electrical system working
Model made out of original used tractor assembly, as detailed below.Engine: Maximum parts and accessories of an engine like three cylinders, Cylinder heads, valve ports, piston, connecting rod, inlet and Exhaust manifolds, Fuel Injection pump, Fuel Injector, Diesel Filter, Water pump, oil pump, air filter, self-starter, Alternator, Hydraulic pump, Radiator etc are sectioned to clearly demonstrate the internal constructional details.Transmission system: Suitable sectioning of the transmission housing is done So as to demonstrate its complete operational principle/Details, by shifting the levers. Other important accessories: accessories like Steering GearBox, Wheel drum, Wheel Cylinder, Master cylinder, Silencer, Hydraulic systems etc., suitably sectioned. Electrical Systems etc., The above-sectioned model should be provided with reduction gear unit with motor for slow speed rotation (15 to 20 rpm) of the model, it will be coated with suitable painting and plating of the Hardwares with suitable mounting option of entire model
4,000
178. Wood Turning Lathe (bed length: 8”, Height of centre: 12”, bed width: 8”, admit between centre: 72”, Nos. of spindle speed: 3, Face chuck dia: 12”, R.P.M.: 3000/1500/750, 2 HP motor) with all standard accessories
2,000
179. Centreless Grinder Machine
(Max grinding dia: 125 mm, Min grinding dia: 6 mm, Regulating wheel: 2 HP, Nos. of speed:3, size: 300X150X127 mm, Grinding wheel: 15 HP, speed: 1250 RPM, size: 500X150X305 mm) with standard accessories
2,000
180. Bed type Pipe and Bolt Threading Machine
(Saddle movement: 10”-12”, Spindle speed range: 60-90, Nos of spindle speed: 2 or 3, threading capacity: 3/8'' to 1. 1/2'',3 HP, 960 RPM, automatic leading cut off) with standard accessories
1,000
181. Shaper Machine (Capacity: length of ram stroke: 18”, length of ram: 40.5”, length & width of ram bearing: 28½x9, Max & Minimum distance from table to Ram: 15x1mm, Table: working surface of table: 18x11½”, Max horizontal table travel: 18”, Max table travel vertical: 13”, angular movement of table on either sides: 60ºL 60ºR, Tool head :Max vertical travel to tool slide: 6”, max swivel of tool head: 60ºL 60ºR, Length of main slide base: 29”,Electric motor: 1.5 HP, Drive Motor: 1440 RPM, Main switch starter: 3.5 AMP, Vice overall dimension: 8”) with standard accessories
4,500
182. All Geared Lathe (Distance b/w centers: 1000-3000 mm. bed width: 430 mm. center height: 5,000
Page 28
Machine 360 mm, swing over bed: 720 mm, swing over cross saddle: 370 mm, swing over carriage: 410 mm, swing in gap: 900 mm, main spindle bore: 70-80 mm, Ns. Of spindle speeds: 18, speed range: 25-500 RPM, cross slide travel: 350 mm, top slide travel: 180 mm, main motor: 5HP, rapid motor for saddle: 2 HP, coolant pump motor: 11kW) with standard accessories.
183. Hacksaw Machine (stroke per minute: 10-120, Blade size: 12”-14”, Electric motor: 1 HP, motor RPM: 1440) with all standard accessories
1,000
184. Digital Tachometer (Range: 0-9999 RPM, Resolution: 1 RPM, Accuracy: Better than 0.01 %±1 RPM, Sampling period: 1 sec, display period: 2 sec, 230 V, Transducer: Magnetic pick-up with 5 mts lead)
600
185. Universal Milling Machine
Table (Working surface: 1400*350 mm, Swivel: + - 45 DEGREE, T-SLOT NOS/ SIZE: 3/17, T-SLOT CENTRE: 80 mm, DIST. FROM SPINDLE MAX/MIN: 475-0 mm, X-LONGITUDINAL TRAVEL: 775 mm, Y-cross travel: 255 mm, Z-vertical travel: 475 mm). Feeds (NO. OF FEEDS: 18, RANGE OF LONGITUDINAL FEED/MIN: 13 to 305, RANGE OF CROSS FEED/MIN: 13 to 305, RANGE OF VERTICAL FEED/MIN: 2.5 to 62, No. of rapid feeds: 2, LONGITUDINAL RAPID FEED/MIN: 735, 1065, CROSS RAPID FEED/MIN: 735, 1065, VERTICAL RAPID FEED/MIN: 147, 210). Spindle (NO. OF SPINDLE SPEEDS: 18, RANGE OF SPINDLE SPEEDS (RPM): 35-1800, SPINDLE TAPER: ISO 40, ARBOUR DIAMETER: 25.4 mm) . Electrical (Main motor: 5HP, Feed Motor : 2 HP, Coolant Motor: 0.1 HP) with standard accessories like vertical attachment and optional accessories like Dividing Head, Slotting Attachment, Rack Cutting Attachment, Rotary Table and Driving Motor
5,000
186. Cut section model of rack and pinion type steering gear box (working)
Model made out of full size original parts, suitably sectioned and to demonstrate the working of Steering wheel worms, Steering arm, etc., is mounted on a sturdy iron frame.
800
187. Cut section model of self starter
Model made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base
400
188. Cut section model of oil pump external and internal
Model made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base.
400
189. Cut section model of centifugal clutch (honda activa)
Model made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.
400
190. Cut section model of su carburator
Model made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base
500
191. Cut section model of tractor gear box – (working)
Model made out of original full size used gearbox, suitably sectioned to show the gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame.
1,000
192. Cut section model of solex carburator
Model made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base
800
193. Model of cut sectioned fuel injecion pump (inline type – 6
Model made out of original MICO make fuel injection pumps, which is suitably sectioned to show the internal details such as the Cam, plungers, delivery valves, tapped rollers, governor fittings and settings action of
800
Page 29
cylinder engine) assembly
acceleration etc., The model mounted on to novapone base, Suitable color painting carried out along with Miracle coating for the model for extra gloss and shine. The painting carried out in such a way that different colors are used for different components such as identification of sectioned area etc according to the colors code for easy identification of different systems and mechanisms. All the hardware’s and gears suitably electroplated
194. Model of cut sectioned fuel injecion pump (distributor type- 4 cylinder) assembly:
Model made out of original MICO/BOSCH make fuel injection pumps pumps, which is suitably sectioned to show the internal details such as the Cam, plungers, delivery valves, tapped rollers, governor fittings and settings action of acceleration etc., The model will be mounted on to novapone base, Suitable color imported painting will be carried out along with Miracle coating for the model will be done for extra gloss and shine. The painting will be carried out in such a way that different colors will be use for different components such as identification of sectioned area etc according to the colors code for easy identification of different systems and mechanisms. All the hardware’s and gears will be suitably electroplated
800
195. Cut section model of sliding mesh gear box –tractor (working)
This model is made out of original full size used gearbox, suitably sectioned to show the gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame.
800
196. Cut section model of synchromesh gear box (working)
This is made out of original full size used gearbox, suitably sectioned to show the details of gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame.
1,000
197. Cut section model of hydraulic brake unit -four wheel type (cut sectioned and working) with two disc and two drum brakes
This model contain two disc brakes in the front and two drum brakes at the rear and made out of original parts such as two master cylinder Assembly (one sectioned and one working), wheel cylinder, Brake drum, Brake Shoes, calipers etc., suitably sectioned and mounted on a sturdy iron frame. By operating the lever provided, the working procedure of the model can be demonstrated.
2,000
198. Cut section model of mechanical fuel pump
This model is made out of original used parts, and suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base
600
199. Cut section model of dynamo
This model is made out of original used parts, and suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base
500
200. Cut section model of self starter-non axle type
This model is made out of original used parts, and suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base.
500
201. Cut section model of vaccum pump(vane type)
This model is made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base.
800
202. Cut section model ofpiston pump(air compressor)
This model is made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base.
600
203. Cut section model of water pump
This model is made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model suitably painted and mounted on a navopan wooden base
600
Page 30
204. Cutsection model of turbocharger
This model is made out of full size original parts, suitably sectioned and to demonstrate the working of turbocharger, is mounted on a suitable base.
600
205. Cut section model of rotary pump
This model is made out of original used parts, suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.
800
206. Cut section model of four cylinder four stroke di with turbo charger engine (working)
The model is made out of full size original four strokes used Diesel engine. Maximum parts and accessories like four cylinders, cylinder head, inlet and Exhaust manifolds, Fuel pump, oil pump, Water pump, Fuel Filter, Fuel Injection pump, injectors, self-starter, Altenator, etc are sectioned to show the internal constructional details of the engine. AF.H.P. 220/230V A.C. Motor is coupled through a Reduction drive unit to the engine by which the model can be demonstrated at very low speed of about 15 to 20 rpm. By running the engine, the working of individual parts and accessories like Crankshaft, Camshaft, Connecting rod, Pistons, Valves, different pumps, etc can be demonstrated. This model is provided upto Flywheel and complete engine is mounted on a sturdy iron frame
1,600
207. Cut section model of steering gear box (working)
This model is made out of full size original parts, suitably sectioned and to demonstrate the working of Steering wheel worms, Steering arm, etc., is mounted on a sturdy iron frame.1. Rack and Pinion type.2. Worm and roller type3. Recirculating ball type.
500
208. Cut section model of single plate coil spring clutch system (working)
Model made out of original used parts such as Flywheel, Clutch plates, etc. to demonstrate the working of clutch assembly. By operating the pedal provided the model can be demonstrated. The entire model mounted on a sturdy iron frame.
500
209. Cut section model of constant mesh gear box (working)
This mode is made out of original full size used gearbox, suitably sectioned to show the gear mechanism of forward. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame.
800
210. Cut section model of disc brake system(working)
The Model made out of Original parts such as Two Brake disc, two Caliper assembly (one sectioned), one master cylinder etc, the model mounted on a sturdy iron frame and can be demonstrated by operating the lever provided.
800
211. Cut section model of air brake system
The model is made out of Original parts such as Air compressor, Unloader valve, foot valve, Booster, Wheel assembly, air tank, control valve etc Suitably sectioned and mounted on a sturdy iron frame.
1,200
212. Plasma cutter (Input Voltage 220 V, Cutting Current 5 - 40 Amps, Max. Thickness of the sheet for cutting 12 mm, Air Pressure required 3. 5 - 5 Bar)
2,000
213. Starter / alternator test bench
(i) Motor 2 hp three phase 1500rpm(ii) Digital dc voltmeter of 3.5 digit display with minimum readable upto 0.1 volt (iii) Digital dc ammeter for load of 3.5 digit display with minimum readable upto 1 amp (iv) Digital make rpm indicator 0-5000rpm(v) Speed sensor for sensing starter speed (vi) Alternator loading through wire wound resistors of 0-50 amps capacity (vii) Alternator loading through 4nos rotary switches. (viii)Two directional rugged mounting arrangement to suitvarious range of alternators.(ix) Provision for two speed check with two set of pulley and belts(x) Starter free spin testing upto 100amps capacity.(xi) 110 v series lamp test facility
2,000
214. Fuel injection pump test bench
(Drive Belt, No. of Cylinders 6 , Motors 3.7 KW for main drives & 0.7 KW for Fuel supply, Tachometer Digital Electronic 0 – 9999 RPM with electronic Timer, Strokes Electronic automatic: 100 – 1200 shots per minute, Speed Range 100 – 3000 RPM, Phasing High Pressure Phasing (standard), Pressure Gauges Two (for fuel supply & high pressure phasing), Speed control Fully controllable from both sides, Capability Inline & Rotary Pumps
1,500
Page 31
testing)215. Injector cleaner &
tester with specifications like
(i). Suitable for cleaning 4 Injectors simultaneously(ii). Ultra Sonic Bath tub as standard supply(iii) Uniformity test, Spray test, Leakage test and Auto test
1,200
216. Battery charger (Short Circuit shutdown without blown fuse,Reverse Polarity Protection, 3-stage charging: CI-CV-Float)
500
217. Model of fuel injection pump-inline type
6 cylinder type fuel injection pump-inline type Nil
218. Demonstration board of fuel supply system of diesel engine
This demonstration board consists of cut sectioned used parts such as Fuel tank, Filter, Fuel Injector with Automiser, etc., to show the Fuel supply system
600
219. Demonstration board of electronic ignition system of an automobile 4 wheeler (working)
This open demonstration working unit is made out of original used parts such as switches, Electronic ignition coil, Distributor, four spark plugs and a battery for power source, with necessary wiring connections. By switching on the switch and by giving rotation to the Distributor, Sequential Sparks in the spark plugs can be demonstrated.
1,600
220. Instruction board for charging system
The Instruction board adopts the real components of charging system to illustrate charging system structure and working principle. The components are rigged onto colour circuit diagram. And made functional.Features1. Real and operatable Charging system such as alternator, meters etc is
assembled onto a colour printed board to illustrating the structure and working process.
2. The alternator will be coupled electric motor, and the necessary electrical circuitry will be provided along with warning lamp, ignition switch, voltage meters etc., to demonstrate the working of charging system.
3. And exploded view arrangement of an alternator assembly will be displayed on the board.
4. Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram.
5. Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current, frequency and wave form signals are provided on to the printed circuit diagram.
6. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.
7. Set the line break, grounding short circuit, improper contact or open circuit faults can be induced; user can adjust the number and type of faults.
8. The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.
1,600
221. Instruction board for electronic fuel injection system of gasoline engine.(MPFI)
The Instruction board adopts the real components of electronic fuel injection system to illustrate engine fuel system structure and working principle. The components are rigged onto colour circuit diagram. And made functional.Features1. Real and operatable engine fuel injection system is assembled onto a colour printed board to illustrating the structure and working process.2. Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram3. Detection terminals for operator to detect various sensors, actuators,
2,500
Page 32
electrical signals for engine control unit, such as resistive, voltage, current , frequency and wave form signals are provided on to the printed circuit diagram.4. The training module is fitted with diagnostic socket (DLC) for universal automobile decoder (Scan tool) to read fault codes, clear fault codes and read data stream.5. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.6. Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.7. Good working condition Parts will be provided with fuel tank. The instruction board has to be connected to 220V AC socket Which changes to 12V DC internally so that the board works without battery.8.The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.
222. Instruction board for electronic fuel injection system of diesel engine.(CRDI)
The Instruction board adopts the real components of electronic fuel injection system( CRDI) to illustrate engine fuel system structure and working principle. The components are rigged onto colour circuit diagram. And made functional.Features1. Real and operatable engine fuel injection system with partial engine block is assembled onto a colour printed board to illustrating the structure and working process .2. Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram.3. Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current, frequency and wave form signals are provided on to the printed circuit diagram.4. The training module is fitted with diagnostic socket (DLC) for universal automobile decoder (Scan tool) to read fault codes, clear fault codes and read data stream.5. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.6. Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.7. Good working condition Parts will be provided with fuel tank. The instruction board has to be connected to 220V AC socket Which changes to 12V DC internally, so that the board works without battery.8. The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.
2,500
223. Instruction board for starting system
The Instruction board adopts the real components of Starting system to illustrate Starting system structure and working principle. The components are rigged onto colour circuit diagram. And made functional.Features
1. Real and operatable starting system such as Starter motor, ignition switch etc is assembled onto a colour printed board to illustrating the structure and working process .
2. The Starter will be connected to a battery, and the necessary electrical circuitry will be provided along with ignition switch, voltage meters etc., to demonstrate the working of charging system.
3. And exploded view arrangement of an starter motor will be displayed on the
1,000
Page 33
board.4. Coloured circuit diagram on the training Module printed on to 6mm organic
glass base. Where in the students can compare the diagram and actual diagram.
5. Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current, frequency and wave form signals are provided on to the printed circuit diagram.
6. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.
7. Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.
8. The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.
224. Training module for the crdi diesel engine with common rail direct fuel injection system
The trainer should help to simulate engine startup, speedup, slowdown and other actions so as to illustrate the structure and working principle of CRDI engines.Features
1. Real and operating CRDI Diesel engine, illustrating the structure and working process.
2. Coloured circuit diagram on the training Module printed on to 6mm organic glass base..
3. Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current, frequency and wave form signals are provided on to the printed circuit diagaram.
4. Automobile meters are fitted on to the training module along with the printed circuit diagram, to demonstrate engine speed, temperature, fuel pressure, charging light etc.,
5. The training module is fitted with diagnostic socket (DLC) for universal automobile decoder(Scan tool) to read fault codes, clear fault codes and read data stream.
6. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.
7. Good working condition engine will be provided with fuel tank and battery. Throttle control is provided on the module to accelerate.
The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.
5,500
225. Training module for the mpfi petrol engine with multi point fuel injection system.
The trainer helps to simulate enginestartup, speedup, slowdown and other actions so as to illustrate the structure and working principle of MPFI engines.Features1. Real and operating Petrol MPFI engine, illustrating the structure and working process.2. Coloured circuit diagram on the training Module printed on to 6mm organic glass base.3. Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current frequency and wave form signals are provided on to the printed circuit diagram.4. Automobile meters are fitted on to the training module along with the printed circuit diagram, to demonstrate engine speed, temperature, fuel
5,000
Page 34
pressure, charging light etc.,5. The training module is fitted with diagnostic socket (DLC) for universal automobile decoder (Scan tool) to read fault codes, clear fault codes and read data stream.6. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.7. Engine should be provided with fuel tank and battery. Throttle control is provided on the module to accelerate.8. It is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.
226. Training platform for abs brake system – (antilock braking system).
The device is designed on the ABS system, where in the principle of operation and working of the same can be demonstrated. A parts and accessories are arranged on to a Colour printed board. And the system is made functional.Features1. Real and operatable ABS brake system is assembled onto a colour printed board to illustrating the structure and working process.2.The front and rear Disc Brake with callipers are coupled to two different three phase motor with electric drives to rotate the front disc and rear disc separately. A brake Pedal along with vacuum booster is connected to the Front calliper system and rear drum brake system, a vacuum pump will be connected to the booster to demonstrate the effect of vacuum in the pedal operation.3.The Device is connected with Pressure meters to demonstrate the different pressure at different locations in the brake system. 4.Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram.5.Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current , frequency and wave form signals are provided on to the printed circuit diagram.6.The training module is fitted with diagnostic socket (DLC) for universal automobile decoder (Scan tool) to read fault codes, clear fault codes and read data stream.7.Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults. 8.Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.9.Good working condition Parts will be provided with fuel tank. The instruction board has to be connected to 220V AC socket Which changes to 12V DC internally, so that the board works without battery.10.The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same
4,000
227. Digital pressure gauge (micro processor controlled, high resolution with LCD display, 4” dial, accuracy: +/- 0.1% F.S., range: 0-20 kg/cm2
600
228. Pitot tube thermo anemometer
(range: 2-100 m/s, operating temp: -5 to 50 C) with probe length: 30 cm 2,000
229. Digital viscometer ( LED display. Measurement range is 10-1 x 105 MPA.S with 4 spindles, 6/12/30/60 rotor speed (rpm), + 5 % newtonian fluid. Provided with RS-232c interface)
1,500
230. Spot Welding System: Light weight C
Technical SpecificationsInput Voltage : 380V A.C, 2 Phase
2,000
Page 35
Clamp, X gun and manual gun for single sided and stud welding operation.
Input Power : 26.8 KVAInput current : 60 AInstant /max Current : 9900 AOne Sided welding thickness: 1.0 + 1.5mmDouble Side welding thickness : 2.5 + 2.5mmOperating way : Electronic Timer continuity.Input Gas Source pressure : 6-10 kg/cm2Power cable length : 2500+2500, 2300 +1900 mm.Vacuum Suction: 180 kg.
231. Butt Welder (6 KVA, 220-240 single phase/ two lines of three phase) Max. Dia of wires weldable (Steel: 5 mm, Copper: 4 mm, Aluminium: 5 mm), Aluminium wires weldable steel (Steel: 2 mm, Copper: 2 mm, Aluminium: 2.5 mm, Nos. of adjusting: 8 Taps) and all necessary accessories like (i) Extended annealing jaws from 4" to 10" (ii) Separate heat regulator for annealing with foot switch (iii) Annealing time will be control automatically by providing an electronic timer. (iv) Lighting lamp with flexible stand.
2,000
232. ARC Welding Machine
(Nominal Current Output: 150 Amp, Primary Voltage: 230/415 V, Phase: 1 & 3, Frequency: 50 Hz, Open Circuit Voltage: 50 Hz, Max. Cont. Hand Welding Current at 60% Duty Cycle: 120, Max. Cont. Automatic Welding Current@100% Cycle: 90, Welding Electrode size Min.: 1.6 mm, Welding Electrode size Max.: 3.15 mm)
1,500
233. Heavy Duty Universal Wood Working Machine
(3 HP, Thicknessers: Thicknessing: 10-285 mm, Thicknessing feed rate per min: 5m/min 15m/max, Planner Jointer: Planning Width: 300 mm, Maximum rebate size: 100 mm,Moulding attachment: Table travel vertical; 125 mm,Table travel internal: 100 mm, Table travel feed: 100 mm, Circular Saw: Saw Max dia: 300 mm, Saw bore: 200 mm, Boring M/C & Mortising attachment: Table Travel Vertical: 125 mm, Table Travel Parallel:100 mm, Table Travel Feed: 10 mm, Wood Lathe:Centre height: 125 mm, Admit b/w centres: 600 mm, Emery wheel size: 150 x 15.199 mm, Emery wheel speed: 1700 & 3000 rpm, Disc Sander: Disc dia: 240 mm, Disc speed: 1700 & 300 rpm, Belt Sander: Length of belt: 110 mm, Width of belt: 100 mm)
4,000
234. Wood Band Saw (12 inch , Motor power: 1hp, Saw wheel diameter: 315mm, Table pivot capacity: 0-45º, Processing scope: max height 160mm, Max width 300mm, Length of saw blade: 2240mm, Line speed of saw blade: 12;6m/s, Table size: 500x400mm, Dust extraction outlet: 100mm, N.w./g.w.: 77/83kg, Dimensions: 1100x500x415mm, Quantity per 20ft/40ft container: 110pcs/230pcs)
2,000
235. Multimeter Power Supply: : 100 V/120 V/220 V/240 V ±10% Power Line Frequency: : 45 Hz to 66 Hz and 360 Hz to 440 Hz, Automatically sensed at power-on Power Consumption: 25 VA peak (10 W average). Operating Environment: Full accuracy for 0°C to 55°C, Full accuracy to 80% R.H. at 40°C
1,000
236. Benchtop Digital 6½ Digit Multimeter
(color graphical display with trend and histogram charts, Truevolt measurement performance and 100% 34401A system compatibility. Measurements: DC & AC volts, DC & AC current, 2- & 4-wire resistance, Frequency & period, Continuity & diode, Temperature, DC Accuracy: 0.0035 %, Reading Speed: 1000 rdgs/s, Connectivity: GPIB, LAN/LXI, USB)
1,500
237. Benchtop Digital 5½ Digit Multimeter/ DC power Supply:
(DC & true RMS AC voltage and current, 4-wire resistance, capacitance, and diode test. 30-W dual-range output 30V/1A and 8V/3A with OVP/ OCP, auto scan /ramp, and square-wave generator. Measurements: DC & AC volts, DC & AC current, 2- & 4-wire resistance, Frequency & period, Continuity & diode, Capacitance, Diode test, DC Accuracy: 0.025 %, Reading Speed: 37 rdgs/s, Connectivity: GPIB/USB, Output Features: Single-output dual range of 30V/1A or 8V/3A, 0.01% + 3mV load
1,000
Page 36
regulation, OVP and OCP, 4.8kHz Square-wave generator, auto ramp and scan capability, Other features: Built-in GPIB (IEEE-488) and USB 2.0 full speed interface, SCPI language compatible, Universal AC input (100V - 240V, 45Hz to 66Hz), Kensington lock slot to prevent theft or misplacement)
238. Handheld Multi-function Calibrator/Meter
(DC & AC current, 2- & 4-wire resistance, Frequency & period, Continuity & diode, Temperature, Voltage, Diode test, Pulse width, Duty cycle. DC Accuracy: 0.03 %, Reading Speed: 3 rdgs/s, Connectivity: IR-USB) with 4-20 mA and 0-20 mA percentage scale readout , 50000 count true-RMS DMM and Built-in battery charging capability
500
239. Multistage centrifugal pump test rig
a) The test rig consists of a 2-stage centrifugal pump set suitable for determining its characteristics at its rated speed. The test centrifugal pump is of 1.0 HP capacity of size 25mmx25mm(1"x1"). The pump is powered by 220 volts, single phase, 50Hz. A stop watch and an M.S. collecting tank of size 150 liters. with a gauge glass scale fitting, a drain valve and a bend are provided to measure the actual flow rate. An energy meter is provided to measure the input power to the pump set. b) Other standard accessories include switch, flow control gate valve, foot valve and piping system with suitable pressure taps to fix the pressure and vacuum gauges.c) A sump tank of size 250 liters with suitable drain is provided to store the water. A strong iron stand fitted with wheels supports the complete test rig. The unit is moveable. All tanks are provided with FRP lining for total rust protection. A technical manual accompanying the unit.
2,500
240. Reciprocating Pump Test Rig
a) The test rig consists of a reciprocating pump set suitable for determining its characteristics such as the efficiency and input power at various head and discharge. The test pump is of size 25mmx20mm(1"x3/4") and is driven by a 1.0 HP single phase 220Volts, 50Hz electric motor. A stop watch and an M.S. collecting tank of size 90 liters. with a gauge glass scale fitting, a drain valve and a bend are provided to measure the actual flow rate. An energy meter is provided to measure the input power to the pump set. b) Other standard accessories include switch, flow control gate valve, foot valve and piping system with suitable pressure taps to fix the pressure and vacuum gauges.c) A sump tank of size 250 liters with suitable drain is provided to store the water. A strong iron stand fitted with wheels supports the complete test rig. The unit is moveable. All tanks are provided with FRP lining for total rust protection. A technical manual accompanying the unit.
2,000
241. Apparatus for Cd, Cv of orifices & CD of Mouthpiece
a) Apparatus consists of an M.S. supply tank of size 0.3mx0.3m and 0.8m height with an inlet diffuser for damping flow oscillations, an overflow outlet, a gauge glass scale fitting, a drain cock and a provision for fixing interchangeable orifice plates and mouthpieces. A modified hook gauge with a suitable scale sliding apparatus is provided to measure the x-y trajectory of the jet. Two standard orifices of size 10mm. and 12mm and four mouthpieces with l/d = 2.5, and 4, Bourda mouthpiece, and converging diverging mouthpiece are provided for conducting the experiments. A stop watch and an M.S. collecting tank of size 45 liters. with a gauge glass scale fitting, a drain valve and a bend are provided to measure the flow rate.b) A 220 volt AC, 0.5 HP, single phase monoblock ISI pumpset with suitable pipe fittings, strainer foot valve, and switch is provided to supply water to the test rig.c) A sump tank of size 250 liters with suitable drain is provided to store the water. A strong iron stand fitted with wheels supports the complete test rig. The unit is moveable. All tanks are provided with FRP lining for total rust protection. A technical manual accompanying the unit.
2,000
Page 37
242. Appratus of Venturimeter and Orificemeters
a) The test rig consists of a GI pipe line fitted with a set of gunmetal venturimeter and orificemeter of size 25mm(1"), and of d/D Ratio = 0.6. The flow meters are provided with pressure tappings with quick change over cocks. A differential manometer (without mercury) is provided to measure the pressure difference across the venturimeter/orificemeter to be tested. The pressure tappings are connected to a common manifold which in turn is connected to the manometer. A strong iron stand is provided for supporting the pipe lines. A stop watch and an M.S. collecting tank of size 90 litre. With a gauge glass scale fitting, a drain valve and a bend are provided to measure the actual flow rate.b) A 220 volt AC, 0.5 HP, single phase mono block ISI pump set with suitable pipe fittings, strainer foot valve, and switch is provided to supply water to the test rig.c) A sump tank of size 200 liters with suitable drain is provided to store the water. A strong iron stand fitted with wheels supports the complete test rig. The unit is moveable.All tanks are provided with FRP lining for total rust protectionA technical manual accompanying the unit.
2,000
243. Submersible Pump Test Rig
a) The test rig consists of an open well submersible pump suitable for determining its characteristics. The test pump is driven by a 1.0 HP single phase 220Volts, 50Hz electric motor. A stop watch and an M.S. collecting tank of size 150 liters with a gauge glass scale fitting, a drain valve and a bend are provided to measure the actual flow rate. An energy meter is provided to measure the input power to the pump set. b) Other standard accessories include switch, flow control gate valve, foot valve and piping system with suitable pressure taps to fix the pressure and vacuum gauges.c) A sump tank of size 250 liters with suitable drain is provided to store the water. A strong iron stand fitted with wheels supports the complete test rig. The unit is moveable. All tanks are provided with FRP lining for total rust protection. A technical manual accompanying the unit.
2,000
244. Apparatus for Study of Cavitation
a) It consists of a high discharge 5HP monoblock centrifugal pump (440 Volts, 3 Phase) pumping water from an MS tank of 400 liters capacity through an orificemeter, a transparent venturimeter and suitable flow control valve back into the tank in a closed circuit form. b) The venturimeter is machined from a solid acrylic block and is provided with pressure taps at the inlet and throat sections. When the flow rate is increased the static pressure at its throat is decreased and when this equals the vapour pressure, cavitation begins. At this point, visual observation of the inception and growth of the cavitation accompanied by the rattling noise can be observed at the transparent throat.c) A pressure gauge and compound gauge is provided to measure the pressure at the inlet and throat of the venturimeter during cavitation. A set of pressure gauges are also provided for the orificemeter to measure the flow rate. Other accessories include switch, starter for the pump and suitable piping and regulating valve. All tanks are provided with FRP lining for total rust protectionA technical manual accompanying the unit.
2,000
245. Autoclave(Horizontal)
Double walled, stainless steel, Radial locking system with pressure gauge, safety device pressure 22 p.s.i. Automatic vacuum breaker, Dimension: 750 mm x 550 mm, 30” x 22”, capacity: 152 lit.
9,000
246. Iron rack/ Book shelf Two sided space having at least 6 shelves on each side Nil247. Digital Platform
weighing scaleCapacity – 150 kg; Accuracy – 20 g; Platter size – 600 x 600 mm; LED display, Inbuilt rechargeable battery, stainless steel
500
248. Electrical 3 – ½ digit LED display, auto temp. compensation measuring range 500
Page 38
Conductivity (EC) Meter
conductance 0.01 us/cm to1000 mS/cm in 5 range 200uS, 2M, 20M, 200M, !000M, measuring range resistance 0.1 ohm to 2 mega ohm in 5 range; Accuracy + 1 % FSD, Cell constant value 1.0
249. Digital pH Meter Range: 0 – 14, Accuracy: + 0.01, 3.5 digit LED display with auto temperature compensation, gel filled epoxy body combination, pH electrodes and RTD probe with recorder output and slope control facility.
500
250. Flame Photometer
Range: Na, K & Li: 1-100 ppm and Ca: 15-100 ppmSensitivity: Na, K & Li: 0.5 ppm and Ca: 15 ppm; Linearity: <3%Reproducibility: 2% CV for 20 samples; Detector: Photo cellIgnition System: Manual; Flame System: LPG & dry oil free air;Automiser: Axial flow type; Power supply: 230VAC±10%, 50 Hz
251. Distillation Assembly
Flask capacity: 5 litre, Automatic low water cut off device in case water supply is stopped; Special grade rubber tubing (10m coil)
252. Double Distillation Assembly
Out put capacity: 2 litre/ hr; Electrical power required: 220/240 V, Single phase, 3.5 KW heater; Cooling water consumption:65 litre; Quartz distiller; Demountable boiler Compact design, Dual safety cut out; High purity; Low conductivity, Pyrogen free distillate
253. Sedimentation cylinder
1 litre mark
254. Mortar and Pestle
255. Munsell Colour Chart
256. G.P.S. Device257. Sieve Set Pores size 4, 2, 1, 0.5, 0.25, 0.10 and 0.62 mm diameter 258. Soxhlet Apparatus Extractor socket: 250ml, 45/40; Extractor cone: 29/32; Flask: 500 ml
259. Deionizer
Capacity: 10 gallon/ minute Sump Tank: 75 gallon polypropylene tankPressurizing Pump: Stainless steel turbine,11/2 HP, Three Phase, 50/60Hz, 15 Amps, TEFC,IEC magnetic starter
260. Water Purifier Double RO system261. Water Purifier Millipore262. Gel Drier
263. Gel Documentation System
Computer along with Accessories and suitable software
264.Fume hood for plant
molecular biologylaboratory
Dimensions (WXDXH Approx.) mm: 1200 X 750 X 1600, Exterior: SS 41plate 1.2t (epoxy powder coated), Interior: Trepsa, Windows and Sash: Safety clear glass 5t & A1 sash, Cabinets for acids/bases and organic solvents
265. Rice Polisher Complete cleaning facility ad suitable for polishing Brown Rice
266.Sample
Divider( Boener Type)
1 kg,3 kg Capacity made of brass
267. Rice Miller268. Rice Huller269. Vacuum Emasculator Set of 20 disposable Glass tubes, pressure-guage and high capacity
Page 39
vacuum pumps powered by Crompton motor
270. Portable pH Meter
Resolution: 0.1pHAccuracy(@20C/68F): 0.1 pHCalibration: manual, 1 or 2 pointBattery operated
271.Seed purity Work
BoardSize:50x 28x 10 Ht.cms( Made of teak wood for longer life)Drawer capacity: 930CC9approx.)
272.Different types of
seed samplerSampling Trier Double Tube Spear Type
273.
Computerized Hot air Seed Dryer – Cabinet
Type
For drying of seed grains,cereals,pulsed & oilseeds
274.Seed/Grain Image
Analyser
Fast and Easy Menu DrivenScanning unit with resolution of 200 dpiThe images save in bitmap (dmp)Should have powerful statistical analysis softwareShould count the grains & analyse the colourCapable of displaying Grain pictures
275. Digital Callipers
Origin setting without repeated Zero settingWhenever power on, the display will always show the current exact measurementNo limit of moving speedAuto power on(move caliper slider),auto power off (5 min after using)Low power consumption with long battery life(>2.5 years)
276. Seed Germinator
Used for germination of seed samplesFully programmable for light & temperatueData storage capacity (1000 readings)16x 2 line alphanumeric LCD displayAudio visual alarmDisplay panel in the door
277.Seed Air-Screen
Cleaner cum Grader
3 screen modelLarge screen areaPowerful aspiration fanBrush type screen cleaningMinimum level of vibration and power requirement
278.Specific Gravity
Separator
Deck Inclination in both directionExcellent and easy wheel arrangement for individual air control of each blowerDynamically balanced blowers to avoid noise and vibrationThe unique oscillating plates design gives trouble free performance
279. Seed Analysis Kit Comprises of 1 No. Dispensing Balance, 1 No. Hand Magnifier (4" dia), 1 Set of Parkhi (9", 12" 14"), Scoop Set, 1 No. Enamelle Plate (12" Dia), 1 No. Palm husker, Measuring Cylinders (10 cc, 50 cc, 100
Page 40
cc), 1 No. Brass Seed caliper, 1 No. Petri dish packed in compact brief case specially designed for Seed/Grain inspectors
280. Broken SeparatorFour Tray of indent size3.5,3.97,4.5,4.8 in mm &one collecting plate with a nice pouch
281. Seed Testing DryerEach box is made up of stainless steel having dimension 5’x 5’x 8 ten boxes are snugly fitted in a powder-coated sturdy cabinet. Separate controller for 10 boxes
282. Precision dividerSize: 38x31x51cm (appox.)Hopper Capacity: 2 Kg Power 0.5 H.P Single PhasePrinciple: Centrifugal Action, Motor Driven
283.Digital Moisture
meter
Basic Agro Model Instant Moisture percentage reading by pressing a switchWeight 9.5 kg
284.Compact Universal
Digital Data Logging Moisture meter
Body made of steelTest cup visible while giving pressureSeven digit LED displayPT- 100 temperature sensor with temperature indicationRS 232 port for printer/ computer
285.Seed Grain divider-
Boerner type
International Model with 38 openingsBrassBodyEspecially for free flowing grain lotsMeets with FCI specificationsTwo brass sample pans extraNo electric requirement & easy operation
286.Seed Grain Divider-
Gamet type
Used for rough glumes & Sticky seed lotsMotor driven with centrifugal actionRotating neoprene discStainless steel body
287.Seed Grader Lab
Model
Especially designed for Lab useSuitability for all cereal grains, pulses, oilseeds etc.Adjustable feed rate & blower speedFraction separationTwo screen systemDifferent fractions & impurities are collected from different spoutsWork even without electricity
288.Computerized seed
counter
16x 2 line alphanumeric LCD displayMicro controller basedComputer/ printer attachmentMembrane keyboardCount maximum upto 999999 seed in lotRange 1 to 15 mmSlow start and slow stop provided for better accuracySoft touch speed control no knob required
Page 41
289.Laboratory Aspirator
–Bates types
For separation of light chaffy material from granular productFast & accurateSeparate detachable transparent collectorFeed rate controller &controlled air flowTriangular panLarge hopper capacity
290.Seed Blower _
Dacota type
Used for Purity testing, docking & cleaning of grainsRobust, fast & MobileTimer facilityBlower speed controllerEffective for small lots of seedWire mesh at bottom prevents seed falling into fanThree sets of imported transparent tubes
291.Rice Huller with Mc
Gill type
For milling small samples to get polished riceFast ,accurate and reliableTime & money saverPortable designSS pressure cover & weight level assemblyTimer facility
292.Rice polisher lab
Model
Sample capacity: 800 Gm Approx.Power required: 0.50 H.P single phaseDimensions:600x400x400 mm(LXBXH)
293. Rice shellerFor dehusking paddy to get brown rice(approx. 20% husk)Consists of one rubber roll & one steel roll (cutter)
294. Horizontal Centrifuge
295.Normal Shaker for
Eppendorf tube
List of required instruments and estimated price for laboratory of different Departments at B.P.S.A.C., PurneaSource of Fund-Joint Secretary, Agriculture, Govt. of Bihar Letter No. 3499 Dt. 10.07.2015
Sl. No
Name of Equipments ( Company/ Brand)
Qty. Details(Specification)
Department of Horticulture
1. D Electronic Balance 1 Single pan Electronic balance
Page 42
Capacity – 200gms, Readability – 0.1 mg, Sensitivity – 0.1 mg
2. Water distillation unit 1 Mono quartz distillation unit, panel quartz boiler and borosilicate condenser vertical model, output capacity 2.5 liter/ hr
3. Laser Leaf Area meter 1 Cl-203, Maximum width, perimeter average and accumulated area, Precision -1%, Resoluation-0.065 mm, Memory-2000 data set, Dsplay-64x240 pixel graphic display , Battery operated
4. Plant canopy Analyzer 1 LP-80, Measuring leaf area index, PAR beam transmission coefficient, Diffusion radiation transmission coefficient , Measuring time 1 second, Fish eye lens angle: 1600-1800 image, Resolution :700:500,Pixels Probe size 20x20 mm
5. Hot Air oven 1 Size-300 litre capacity,Temperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and process value, voltage indicator - digital volt meter, illumination—Fluorescent lamp
6. Varnier caliper 1 Digital measure-01mm to 10 mm, Stainless steel made7. Grinder machine 1 Steel, ½ hoarse motor operated, Electric power -220 V AC,
Chamber fitted with hopper three delivery stainless steel sieves-20,40 and 60 mes
8. Chlorophyll content meter 1 Measure parameter : CCl Value: measuring area: 1 cm diameter, Resolution :0.1 CCl unit
9. Penetrometer of fruits 1 0.2 -4.0 kg pressure, Handy, Pressure gage meter10. Viscometer ( Brook Field) 1 Min range-15 Cp, Borosilicate glass martial11. Digital Hand Refractometer 01 Refractive index reading range-13330-14465, Refractive index
reading accuracy -0.0002, Brix reading accuracy 0.2, Brix reading range- 0.0to 62 %, Calibration water prism material glass,Digital
12. Digital pH meter( Systronic) 1 Range : 0-14.00 pH
Resolution : 0.01pH
Permeability : + 0.01 pH + 1 digit Display- LED display, Electric power -220, Stability : 0.01 pH per hour
13. Spectrophotometer( Systronic) 1 Graphical display, Light source-Xenon lamp, Wavelenthrange-190-900 nm, Electric power -220 V AC
14. Flame photometer with motor( ELICO)
1 Sensitivity :
Element Na K Ca Mg Li
Ppm 0.1 0.1 0.1 0.1 0.5
Range
Ppm 1-100 1-100 1-100 1-100 1-100
Linearity
In % -------------- better than 2 %----------------------
Page 43
Reproducibility
In % ------- 1 % CV for 100 consecutive sample-----
Lame System LPG & Oil free dry air , Electric power -220 V AC Entomology Apartment
A. Entomology +Nematology Equipments
15. Electronic Balance/ Chemical Balance
02 Single top pan Electronic balance
Capacity – 200gms, Readability – 0.1 mg, Sensitivity – 0.1 mg, 16. Insect collecting net 40 Model RI-69-06, Aluminum handle, Folding ring, 17. Stereo Zoom Microscope
(RI-90-01) Olympus02 Universal infinity system with antifungal treatment providing
image flatness 10X (FN10) paired eye picce plan achromatic objective 4X, 10X,40X and 100X seidentopf observation head, observation tube 30 o incline interpupillary distance adjustment range 40-75mm 6 v 20w halogen bulb
18. Incubator 1 Temperature range-5 to 60 0c, Humidity range-5% above ambient from 40 to 95 % RH, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and poess value, voltage indicatore - digital volt meter, illumination—Fluorescent lamp
19. Insect showcase cabinet small (RI-64)
4 Size 45x30x6.5 cm (RI-6-02), Cabinet frame of plywood with melamine lamination, Hinging door is provided with lock and handle
20. Weight box 2 Set of box with milligram small box 21. Power sprayer cum duster 01 10 liter capacity, power operated dusting22. Zooplankton net 02 Plankton net, Diameter entrance: 130mm, ring diam-180,
includes bucket meshes and front demountable, available in 4 size: 63,80,153, 243um, Big bag
23. Knapsack sprayer 2 10 liter cap24. Insect Storage box (RI-61) 50 Teakwood frame with melamine laminated on top and MDF
sheet at bottom is polished. Top and bottom lined with 8 mm thick soft pining wasable EVA sheet, Box size-53x45x9cm
25. Insect Display Showcase (RI-63-01)
02 Size 90x60x11cm, MDF frame with MDF sheet bottom and glass top is nicly polished, Bottom lined with 8 mm thick EVA sheet
26. Zooplankton net (RI-70-03) 06 80/150/250 mesh size
27. Insect killing Jar(RI-72-07)
50 RI-72-07, 2 liter capacity
28. Compound microscope with image analyzer
2 Olympus, Precise graduated slow motion reading to .002 mmm, Eyepieces WF 101x and 15 X two nose, Objective-10x, 45x and 100x (SL) oil immersion
29. Altimeter (RI-72-08) 1 RI-72-08, Round , dial type, range 0-5000 meter30. Dissecting tray 40 With wax standard size31. Insect stretching board 40 Size 90x60x11cm, MDF frame with MDF sheet bottom and
glass top is nicely polished, Bottom lined with 8 mm thick EVA sheet
32. Magnifying glass 25 Magnifying of small insects 10X33. Permanente slide with slide
box50 Insect morphology and anatomy samples for identification
Page 44
34. Refrigerator 01 Temperature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
Capacity-250 lit35 Insect dissecting box 10 Sesser, Brush, Razor, Slide, etc38. Metallic sieves BSS 06 BSS 20 mesh, 60 mesh, 100 mesh, 350 mesh, 400 mesh and 500
mesh seives39 Aspirator 02 For collecting small insects40 Wrinkle bag 02 For collection of soil insect41 Malaise trap 02 For collection of insect42 Window trap 02 For collection of insect43 Pit fall trap 02 For collection of insect44 Yellow pan trap 02 For collection of insect45 Yellow sticky trap 06 For collection of insect46 Pheromone trap 06 For collection of insect47 Light trap 01 For collection of insect
Total AApiculture Equipment
48 Langstroth bee hive 04 Full set including super49 Hive tool 1 _____50 Hive stand 03 _____51 Uncapping knife 01 _____52 Honey extractor 01 Five Frame 53 Comb foundation meal 01 _____54 Smoker 01 _____55 Bee veil 10 _____56 Queen excluder 03 _____57 Queen kage 03 _____58 Queen cell protector 03 _____59 Gloves 03 _____60 Dummy/ division board 02 _____61 Feeder 03 _____62 Drone trap 01 _____63 Comb foundation sheet 1kg _____64 Swarm bag 01 _____65 Queen gate 03 _____66 Ant barrier 03 _____67 Bee brush 01 _____68 Entrance guard 03 _____69 Propalis screen 01 _____70 Venom extractor 01 _____71 Queen bee rearing
equipment01 Full Set
72 Wax melting drum 01 _____73 Anti robbing hive 01 _____74 Pollen trap 01 _____
Page 45
75 Nucleus hive 01 _____76 Wasp trap 03 _____
Department of Plant Breeding &GeneticsBiotechnology
77 Autoclave 1 Digital Pressure gauge- 30psi
safety device- lower water level cut off, Pressure control switch (Piezostat),automatic vacuum breaker Autoclave Vertical supplied with S.S. Chambers, S. S. Basket &S.S.Lid with Wing nut closing arrangement. Inner & Outer also made of S.S.(stainless steel), power
78 Refrigerator 1 Capacity -300 liter, Temperature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
35. Incubator cum Shaker 1 Capacity -300 liter, Temperature range-5 to60 0c Temperature accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display, Temperature control – microprocessor, RMP - Digital Display
36. Dry Bath 1 Temperature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
37. Water Bath 1 Twelve holes top pan with led ,Electric power -220 V AC, Display- LCD display, Temperature controller- thermostat, Temperature range-5 to 100 0c, auto control
38. DNA Gel Electrophoresis with Power supply
1 LP-80
39. UV Tran illuminator 1 Genie make 40. PCR Machine with online UPS 1 IGBIHIGH41. Magnetic Stirrer with hot
plate 122331Hamberg
42. Vortexer 1 TANCO, 2 liter capacity43. Bench-top centrifuge with
Rotor for 1.5 ml tubes 1Model 130 Make Systronics
44. Protein gel electrophoresis unit
1 Bajaj
45. Weighing Balance 1 Single pan Electronic balance
Capacity – 200gms, Readability – 0.1 mg, Sensitivity – 0.1 mg,
46. Liquid Nitrogen Container (20 Lit.)
1 KERN, 20 liter capacity
47. Microwave oven
1
Halo DB205, Size-30 liter capacityTemperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and process value, illumination—Fluorescent lamp
48. Hot Air Oven
1
Size-300 litre capacityTemperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and process value, voltage indicator – digital volt meter, illumination—Fluorescent lamp
Page 46
49. Vortexer 1 Cl-20350. Gel Documentation System 1 LP-8051. Tissue culture Racks with Acs,
Photo-periodic timer, temperature controller 1
Millipore 2 TLH0005
52. Ice Flaking Machine 1 LICORINC LI6400XT
Department of Plant Pathology53. Leaf Area Meter 2 Handy, Maximum width, perimeter average and
accumulated area, Precision -1%, Resoluation-0.065 mm, Memory-2000 data set, Dsplay-64x240 pixel graphic display , Battery operated
54. Balance 1 Single pan Electronic balance
Capacity – 200gms, Readability – 0.1 mg, Sensitivity – 0.1 mg55. Respirometer 20 Warburg manometer, graduated tubes fitted on wood56. Compound Microscope 3 Precise graduated slow motion reading to .002 mm, Eyepieces
WF 101x and 15 X two nose, Objective-10x, 45x and 100x (SL) oil immersion
57. Water Bath 1 Twelve holes top pan with led ,Electric power -220 V AC, Display- LCD display, Temperature controller- thermostat, Temperature range-5 to 100 0c, auto control
58. Plant Growth Chamber- convention type
1 Temperature range-5 to 60 0c, Humidity range-5% above ambient from 40 to 95 % RH, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and poses value, voltage indicator – digital volt meter, illumination—Fluorescent lamp
59. Auxanometer10
Arc auxanometer, with stainless steel stand, clamp with arc divided in to scale
60. Photometer10
Ganang,s photometer, capillary tube with, cork based with water reservoir marked by scale
61. Digital Chlorophyll content meter 1
Measure parameter : CCl Value: measuring area: 1 cm diameter, Resolution :0.1 CCl unit
Department of Plant Breeding and Genetics62. Weighing Balance
1Single top pan Electronic balance
Capacity – 2000gms, Readability – 010 mg, Sensitivity – 1 gram63. PH Meter
1
Range : 0-14.00 Ph
Resolution : 0.01Ph
Repeatability : + 0.01 Ph + 1 digit
Stability : 0.01 Ph per hour, Auto temperature compensation
64. Compound Microscope 5 Precise graduated slow motion reading to .002 mm, Eyepieces WF 101x and 15 X two nose, Objective-10x, 45x and 100x (SL) oil immersion
65. Water Bath 1 Twelve holes top pan with led ,Electric power -220 V AC, Display- LCD display, Temperature controller- thermostat, Temperature range-5
Page 47
to 100 0c, auto control
66. Seed germinator Machine 1 Size-300 litre capacity, no of shelves-14,Electric power -220 V AC, Display- LED display, Temperature controller- thermostat, Temperature range-5 to 60 0c, auto control,Illumination - Fluorescent lamp
67. Grain Moisture Meter 1 Batteries operated, Display- LED display
Soil Science and Agricultural chemistry68. Digital pH meter( Systronic) 1 Range : 0-14.00 pH
Resolution : 0.01pH
Repeatability : + 0.01 pH + 1 digit Display- LED display, Electric power -220, Stability : 0.01 pH per hour
69. Spectrophotometer( Systronic) 1 Graphical display, Light source-Xenon lamp, Wavelenthrange-190-900 nm, Electric power -220 V AC
70. Flame photometer with motor( ELICO)
1 Sensitivity :
Element Na K Ca Mg Li
Ppm 0.1 0.1 0.1 0.1 0.5
Range
Ppm 1-100 1-100 1-100 1-100 1-100
Linearity
In % -------------- better than 2 %----------------------
Reproducibility
In % ------- 1 % CV for 100 consecutive sample-----
Lame System LPG & Oil free dry air , Electric power -220 V AC 71. Atomic Absorption
Spectrophotometer( With all accessories like, cathode lamp, gass cylinder, computer based)
1 Double beam, Wavelenthrange-190-900 nm Sensitivity :
Element Fe , Mn , Cu, Zn , Ni , Pb, Co, and Cd
Ppm - 0.01-10 , 0.01-50 , 0.01-10, 0.01-10 0.005-5, 0.001-1,0.001-1 and 0.001-5
Electric power -220 V AC
72. Grinder machine 1 Steel, ½ hoarse motor operated, Electric power -220 V AC, Chamber fitted with hopper three delivery stainless steel sieves-20,40 and 60 mes
73. Automatic soil testing system 1 IARA manufactured 74. Digital Balance (up to 200g)
1Weight capacity-200g ,Repeatablity-0.1mg ,Electric power -220 V AC
75. Single water distillation unit
1
Mono quartz distillation unit, panel quartz boiler and borosilicate condenser vertical model, output capacity 2.5 liter/ hr Electric power -220 V AC
76. Core Sampler Tube Auger 1 Stainless steel , slide hammer, core cup and cap, 2 plastic end caps and plastic liner
77. Digestion unit with glass chamber and fume exhaust
1 .BLOCK DIGESTION SYSTEM
Page 48
system Model : KES 40( MICRO DIGESTION SYSTEM)
No. of Samples : 40
Tube capacity : 100 ml
Tube dimension : 300 x Ø 26 mm
Temp. range : 50- 6000C
Electric power -220 V AC78. EC meter 1 Digit Display- LED display, Electric power -220, Stability : 0.01 Electrical
Conductivity per
79. Double Water distillation set 1 Double quartz distillation unit, panel quartz boiler and borosilicate condenser vertical model, output capacity 2.5 liter/ hr,Electric power -220 V AC
80. Chemical balance 2 Stainless steel made, brass pan, fitted inside cabinet box, capacity -200 gram
81. Physical balance 2 Stainless steel made, brass pan, fitted inside cabinet box, capacity -200 gram
82. Weight box 2 Set of box with milligram small box 83. Dutch Auger
2Stainless steel made, 1 meter rod with handle, auger diameter 2.5 cm
84. Kelplus nitrogen distillation unit
1
.AUTOMATIC DISTILLATION SYSTEM
Distillation time : 3-21 minute
Distillation capacity : 10-20 sample per hour
3.OPTIONAL MODULAR TITRATION FACILITY
85. Hot plate (upto 400 °C)
1
size7.5 x 7.5”, chemical resistant ceramic coated stainless steel top, ( temperature- upto 0 -400 °C) Electric power -220 V AC
86. Laminar air flow 1 Steel table Top, Hepa Filter Pre- Filters, Cock for gas air with standard accessories, Working area- 4 x 2 x 2 feet, Hepa filter size - 4 x 2 x 6 feet, Hepa filter no. – 1,Pre –Filter no. - 2,Illumination - 2 Fluorescent lamp
Electric power -220 V AC, Front door
87. Magnetic stirrer 1 2 liter capacity, Electric power -220 V AC, LED display 88. Mechanical shaker 1 Rotary Shakers with one platform of size 24 inch X 24 inch, 16 x 1000/ 25 X
500/ 36 X 250/ 49 X 150/ 64 X 100
Optional accessories:- Additional Platform
Additional price for shaker with variable speed having digital speed meter89. Mechanical stirrer
1Stirrer Electric power operated -220 V AC, speed controller, with one platform
90. Mercury Thermometer 1 (0-200°C)91. Hydrometer
5Molded , seamless construction with bouyoucos double scale for all around visible
92. Metallic Keen box 12 Lid s with capacity to used 200 gram soil sample
Page 49
93. Metallic Sieve 1 0.2 mm pore size, 2mm pore size94. Microscope
5
Precise graduated slow motion reading to .002 mm, Eyepieces WF 101x and 15 X two nose, Objective-10x, 45x and 100x (SL) oil immersion
95. Muffle furnace1
20x15x20 cm, Temp range- 1000-1300oC, Temp controller- microprocessor based Electric power -220 V AC, Display- LED display
96. Munsellcolour chart 197. Oven
1
Size-300 litre capacityTemperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and process value, voltage indicator - digital volt meter, illumination—Fluorescent lamp
98. Refrigerator/freeze
1
Size-330 liter capacityTempertature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
99. Remi Centrifuge 1 Electric power -220 V AC, Display- LCD display, RPM-15000 / minute
100. Silica crucible 10 Capacity -5 gram grain sample can used, softening temperature 1700 0 c , Working temperature-1900-20000c
101. Soil testing kit 5102. Soxhlet apparatus
2 Quartz distillation flask, borosilicate condenser vertical model, output capacity , clamp and standwater bath operated
103. Tensiometer4
Ceramic cup , Three nos for shallow depth (30 cm), measurement , Three nos for 60 cm depth measurement
104. Yoder Aggregate analysis apparatus 1
Size-330 liter capacity , Electric motor operated Electric power -220 V AC, Display- LED display
105. Voltage stabilizer 3 Auto manual voltage stabilizer106. Core sampler with 50 core 1 steel107. Steam water bath 1 Twelve holes top pan with led ,Electric power -220 V AC, Display- LCD
display, Temperature controller- thermostat, Temperature range-5 to 100 0c, auto control
Agronomy108. Tensiometer
5
Ceramic cup , Three no.s for shallow depth (30 cm), measurement , Three nos for 60 cm depth measurement
109. Resistance block 5110. Seed drier
1
Microcontroller based LED control digital display of temperature, Forced air circulation, insulated tripped walled with gas kit door , easily replaceable of tubular heater
111. Seed grinder 1 Steel, ½ hoarse motor operated, Electric power -220 V AC, Chamber fitted with hopper three delivery stainless steel sieves-20,40 and 60 mes
112. Maize Sheller 1 10 cm length , iron made113. Glass thermometer 5 Maximum, Minimum, Hg column114. Automatic weather station 1 Comprises 6 sensors for measuring weather parameter- Wind speed,
wind direction, air temperature,, relative humidity, rain gauge and solar radiation, 8 channel data logger is used to collect and data connected by PC on site using remote connection option
115. Core sampler and tube Auger 2 Stainless steel made, 1 meter rod with handle, auger diameter 2.5 cm
116. Pressure plate apparatus 1 Capable of measurement in .1 to 15 bar suction, Two extractor with
Page 50
ceramic plates, Accessories like soil sample ring, pressure control panel and compressor to be supplied
117. Refrigerator-220 Liter 1 Temperature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
118. Physical Balance 1 Stainless steel made, brass pan, fitted inside cabinet box, capacity -200 gram
119. Leaf area meter 1 Handy, Maximum width, perimeter average and accumulated area, Precision -1%, Resoluation-0.065 mm, Memory-2000 data set, Dsplay-64x240 pixel graphic display , Battery operated
Dept. Of Agricultural Economics120. Computer 2 with UPS and internet facility for agricultural marketing and
computer lab
121. Printer 2122. SPSS software 1123. Digital camera with video 1124. Projector set 1125. Hard disc (1 TB) 1126. Sound system 1
Department of Plant Pathology127. Refrigerator 1 LG GL-205KMG5 Double Door 300 Litres
128. Microscope (Stereo Zoom) 3 Olampus, Universal infinity system with antifungal treatment providing image flatness 10X (FN10) paired eye picce plan achromatic objective 4X, 10X,40X and 100X seidentopf observation head, observation tube 30 o incline interpupillary distance adjustment range 40-75mm 6 v 20w halogen bulb
129. Oven 1 Size-300 litre capacityTemperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and process value, voltage indicator - digital volt meter, illumination—Fluorescent lampTemperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric power -220 V AC, Display- LCD display for set value and process value, voltage indicator - digital volt meter, illumination—Fluorescent lampRemi
130. Laminar air flow 1 Steel table Top, Hepa Filter Pre- Filters, Cock for gas air with standard accessories
Working area- 4 x 2 x 2 feet
Hepa filter size - 4 x 2 x 6 feet
Hepa filter no. – 1
Pre –Filter no. - 2
Page 51
131. BOD incubator Cum shaker, 1 Remi Microprocessor controlled Incubators with centronic printer Interface ,Tempertature range-5 to 60 0c,Temperture accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
Capacity- 340 liters,62 W x 52 D x 102 H, 5 C to 60 C
132. Autoclave (Double walled stainless steel)-40 liter capacity, Heating load-2.0 KWS
2 Digital Pressure gauge- 30psi
satety device- lower water level cut off, Pressure control switch (Piezostat),automatic vacuum breaker Autoclave Vertical supplied with S.S. Chambers, S. S. Basket &S.S.Lid with Wing nut closing arrangement. Inner & Outer also made of S.S.(stainless steel), power supplied- ,220 volt AC
133. Electronic Balance 1 Weight capacity-200g ,Repeatablity-0.1mg
134. Compound Microscope Instarision Make with 100xoll/mm
1 Olympus, Precise graduated slow motion reading to .002 mm, Eyepieces WF 101x and 15 X two nose, Objective-10x, 45x and 100x (SL) oil immersion
135. Hot Plate 1 size7.5 x 7.5”, chemical resistant ceramic coated stainless steel top, ( temperature- upto 0 -400 °C) Electric power -220 V AC
TERMS AND CONDITIONS FOR FILLING TENDER DOCUMENT ON LABORATORY EQUIPMENTS:(a) Bid documents should be submitted in two different envelopes namely: (i) Technical (ii) Financial (b) In technical envelope detail specification and required documents should be enclosed. (i) Registration certificate of the firm. (ii) VAT registration certificate and VAT return copy of last quarter.(iii) Photocopy of PAN card (iv) Service Tax Registration Certificate (v)Must have executed similar kind of order in bulk. (vi)Must submit Audited balance sheet of the firm of the last three years.(vii) Conditional tender will not be accepted.
Page 52
(viii)University reserves the right to increase or decrease the quantity and may cancel the tender at any stage without assuring any reason thereof.(ix) Must submit income tax return copy of the last three years.(x) The bidder must quote the shortest possible time during which they will be able to supply the items at designated place decided by the University.(xi) No freight charges will be paid extra other than quoted price. (xii)Tender paper fee of Rs. 500/- will have to be deposited as DD in favor of Comptroller, BAU, Sabour.(xiii)For each equipment EMD @ 10% will be charged on minimum amount of Rs. 25000/- especially for those whose EMD value has not been mentioned. (xiv) EMD should be deposited in favor of Comptroller, BAU, Sabour(xiv)Taxes applicable will be deducted
Page 53
Related Documents
